blob: a1715e6c15352611f336636e758e9308070ec2a7 [file] [log] [blame]
[ 0.000000] Linux version 5.0.13-arch1-1-ARCH (builduser@heftig-13472) (gcc version 8.3.0 (GCC)) #1 SMP PREEMPT Sun May 5 18:05:41 UTC 2019
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=409c0333-c8b1-4428-889b-f838f6f3dd3c rw iomem=relaxed amdgpu.dpm=1 amdgpu.dc=1 amdgpu.ppfeaturemask=0xffffffff
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff24fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff25000-0x00000000829fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027b5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 2347B85/2347B85, BIOS CBET4000 4.9-1538-g0de835d52e-dirty 05/07/2019
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2693.927 MHz processor
[ 0.002507] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.002508] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.002512] last_pfn = 0x27b600 max_arch_pfn = 0x400000000
[ 0.002516] MTRR default type: uncachable
[ 0.002517] MTRR fixed ranges enabled:
[ 0.002518] 00000-9FFFF write-back
[ 0.002519] A0000-BFFFF uncachable
[ 0.002519] C0000-FFFFF write-back
[ 0.002520] MTRR variable ranges enabled:
[ 0.002521] 0 base 000000000 mask F80000000 write-back
[ 0.002522] 1 base 0D0000000 mask FF0000000 write-combining
[ 0.002523] 2 base 100000000 mask F00000000 write-back
[ 0.002524] 3 base 200000000 mask F80000000 write-back
[ 0.002525] 4 disabled
[ 0.002525] 5 disabled
[ 0.002526] 6 disabled
[ 0.002526] 7 disabled
[ 0.002526] 8 disabled
[ 0.002527] 9 disabled
[ 0.003400] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.003576] last_pfn = 0x7ff25 max_arch_pfn = 0x400000000
[ 0.013827] check: Scanning 1 areas for low memory corruption
[ 0.013833] BRK [0x20f201000, 0x20f201fff] PGTABLE
[ 0.013834] BRK [0x20f202000, 0x20f202fff] PGTABLE
[ 0.013836] BRK [0x20f203000, 0x20f203fff] PGTABLE
[ 0.013854] BRK [0x20f204000, 0x20f204fff] PGTABLE
[ 0.013856] BRK [0x20f205000, 0x20f205fff] PGTABLE
[ 0.013917] BRK [0x20f206000, 0x20f206fff] PGTABLE
[ 0.013935] BRK [0x20f207000, 0x20f207fff] PGTABLE
[ 0.014035] RAMDISK: [mem 0x34a69000-0x3652bfff]
[ 0.014041] ACPI: Early table checksum verification disabled
[ 0.014103] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4)
[ 0.014106] ACPI: XSDT 0x000000007FF4B0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20180810)
[ 0.014111] ACPI: FACP 0x000000007FF4EB20 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20180810)
[ 0.014116] ACPI: DSDT 0x000000007FF4B280 003899 (v02 COREv4 COREBOOT 20141018 INTL 20180810)
[ 0.014119] ACPI: FACS 0x000000007FF4B240 000040
[ 0.014121] ACPI: FACS 0x000000007FF4B240 000040
[ 0.014123] ACPI: SSDT 0x000000007FF4EC20 003094 (v02 COREv4 COREBOOT 0000002A CORE 20180810)
[ 0.014126] ACPI: MCFG 0x000000007FF51CC0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20180810)
[ 0.014128] ACPI: TCPA 0x000000007FF51D00 000032 (v02 COREv4 COREBOOT 00000000 CORE 20180810)
[ 0.014131] ACPI: APIC 0x000000007FF51D40 00008C (v02 COREv4 COREBOOT 00000000 CORE 20180810)
[ 0.014133] ACPI: DMAR 0x000000007FF51DD0 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20180810)
[ 0.014136] ACPI: HPET 0x000000007FF51EA0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20180810)
[ 0.014142] ACPI: Local APIC address 0xfee00000
[ 0.014217] No NUMA configuration found
[ 0.014218] Faking a node at [mem 0x0000000000000000-0x000000027b5fffff]
[ 0.014221] NODE_DATA(0) allocated [mem 0x27b5f7000-0x27b5fafff]
[ 0.014243] Zone ranges:
[ 0.014243] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.014244] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.014245] Normal [mem 0x0000000100000000-0x000000027b5fffff]
[ 0.014246] Device empty
[ 0.014247] Movable zone start for each node
[ 0.014247] Early memory node ranges
[ 0.014248] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.014249] node 0: [mem 0x0000000000100000-0x000000007ff24fff]
[ 0.014250] node 0: [mem 0x0000000100000000-0x000000027b5fffff]
[ 0.014259] Zeroed struct page in unavailable ranges: 317 pages
[ 0.014260] Initmem setup node 0 [mem 0x0000000000001000-0x000000027b5fffff]
[ 0.014262] On node 0 totalpages: 2077891
[ 0.014263] DMA zone: 64 pages used for memmap
[ 0.014263] DMA zone: 21 pages reserved
[ 0.014264] DMA zone: 3998 pages, LIFO batch:0
[ 0.014362] DMA32 zone: 8125 pages used for memmap
[ 0.014363] DMA32 zone: 519973 pages, LIFO batch:63
[ 0.027960] Normal zone: 24280 pages used for memmap
[ 0.027962] Normal zone: 1553920 pages, LIFO batch:63
[ 0.064415] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
[ 0.064604] ACPI: PM-Timer IO Port: 0x508
[ 0.064606] ACPI: Local APIC address 0xfee00000
[ 0.064623] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.064625] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.064627] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.064628] ACPI: IRQ0 used by override.
[ 0.064629] ACPI: IRQ9 used by override.
[ 0.064631] Using ACPI (MADT) for SMP configuration information
[ 0.064633] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.064638] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.064647] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.064648] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.064649] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.064649] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.064650] PM: Registered nosave memory: [mem 0x7ff25000-0x829fffff]
[ 0.064651] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[ 0.064652] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.064652] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[ 0.064653] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.064653] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.064654] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.064654] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.064656] [mem 0x82a00000-0xefffffff] available for PCI devices
[ 0.064657] Booting paravirtualized kernel on bare hardware
[ 0.064660] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.184493] random: get_random_bytes called from start_kernel+0x95/0x538 with crng_init=0
[ 0.184499] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.184678] percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u262144
[ 0.184683] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.184684] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.184699] Built 1 zonelists, mobility grouping on. Total pages: 2045401
[ 0.184699] Policy zone: Normal
[ 0.184701] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=409c0333-c8b1-4428-889b-f838f6f3dd3c rw iomem=relaxed amdgpu.dpm=1 amdgpu.dc=1 amdgpu.ppfeaturemask=0xffffffff
[ 0.188079] Calgary: detecting Calgary via BIOS EBDA area
[ 0.188082] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.207983] Memory: 8056740K/8311564K available (12291K kernel code, 1291K rwdata, 3652K rodata, 1548K init, 3848K bss, 254824K reserved, 0K cma-reserved)
[ 0.208126] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.208131] Kernel/User page tables isolation: enabled
[ 0.208145] ftrace: allocating 36357 entries in 143 pages
[ 0.221827] rcu: Preemptible hierarchical RCU implementation.
[ 0.221828] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.221829] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.221829] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.221830] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.221831] Tasks RCU enabled.
[ 0.221831] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.221832] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.223245] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[ 0.223402] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.223447] Console: colour dummy device 80x25
[ 0.223450] printk: console [tty0] enabled
[ 0.223467] ACPI: Core revision 20181213
[ 0.223614] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.223624] hpet clockevent registered
[ 0.223629] APIC: Switch to symmetric I/O mode setup
[ 0.223630] DMAR: Host address width 36
[ 0.223631] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.223635] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.223636] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff
[ 0.223637] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.223640] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.223641] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.223642] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.223643] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.224028] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.224029] x2apic enabled
[ 0.224034] Switched APIC routing to cluster x2apic.
[ 0.224467] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.240295] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d4d538980, max_idle_ns: 440795219321 ns
[ 0.240309] Calibrating delay loop (skipped), value calculated using timer frequency.. 5390.34 BogoMIPS (lpj=8979756)
[ 0.240311] pid_max: default: 32768 minimum: 301
[ 0.240340] LSM: Security Framework initializing
[ 0.240341] Yama: becoming mindful.
[ 0.240346] AppArmor: AppArmor disabled by boot time parameter
[ 0.241469] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.242044] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.242073] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.242090] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.242305] mce: CPU supports 9 MCE banks
[ 0.242315] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.242326] process: using mwait in idle threads
[ 0.242329] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.242330] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.242331] Spectre V2 : Mitigation: Full generic retpoline
[ 0.242332] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.242332] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.242341] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.242341] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.242343] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.242500] Freeing SMP alternatives memory: 32K
[ 0.243397] TSC deadline timer enabled
[ 0.243400] smpboot: CPU0: Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.260312] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.260353] ... version: 3
[ 0.260354] ... bit width: 48
[ 0.260355] ... generic registers: 4
[ 0.260357] ... value mask: 0000ffffffffffff
[ 0.260358] ... max period: 00007fffffffffff
[ 0.260359] ... fixed-purpose events: 3
[ 0.260360] ... event mask: 000000070000000f
[ 0.266971] rcu: Hierarchical SRCU implementation.
[ 0.290475] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.296983] smp: Bringing up secondary CPUs ...
[ 0.336991] x86: Booting SMP configuration:
[ 0.336993] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.583400] smp: Brought up 1 node, 8 CPUs
[ 0.583400] smpboot: Max logical packages: 1
[ 0.583400] smpboot: Total of 8 processors activated (43120.78 BogoMIPS)
[ 0.583922] devtmpfs: initialized
[ 0.583922] x86/mm: Memory block size: 128MB
[ 0.584274] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.584274] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.584274] pinctrl core: initialized pinctrl subsystem
[ 0.584274] RTC time: 13:01:27, date: 2019-05-07
[ 0.584274] NET: Registered protocol family 16
[ 0.584274] audit: initializing netlink subsys (disabled)
[ 0.584274] audit: type=2000 audit(1557234087.359:1): state=initialized audit_enabled=0 res=1
[ 0.586984] cpuidle: using governor ladder
[ 0.586993] cpuidle: using governor menu
[ 0.587012] ACPI: bus type PCI registered
[ 0.587014] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.587080] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.587083] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.587092] PCI: Using configuration type 1 for base access
[ 0.587119] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.588074] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.588074] ACPI: Added _OSI(Module Device)
[ 0.588074] ACPI: Added _OSI(Processor Device)
[ 0.588074] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.588074] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.588074] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.588074] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.588074] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.589665] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.593640] ACPI: EC: EC started
[ 0.593640] ACPI: EC: interrupt blocked
[ 0.593640] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.593640] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.593640] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.593640] ACPI: Interpreter enabled
[ 0.593640] ACPI: (supports S0 S3 S4 S5)
[ 0.593640] ACPI: Using IOAPIC for interrupt routing
[ 0.593640] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.593640] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.599304] ACPI: Power Resource [FPWR] (off)
[ 0.599710] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.599715] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.599777] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.599788] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.600047] PCI host bridge to bus 0000:00
[ 0.600050] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.600051] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.600052] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.600053] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.600054] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.600055] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.600056] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.600056] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.600057] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.600058] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.600059] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.600060] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.600061] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.600062] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.600063] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.600064] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.600065] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window]
[ 0.600066] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.600067] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.600074] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.600170] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.600180] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
[ 0.600185] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.600189] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.600286] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.600313] pci 0000:00:14.0: reg 0x10: [mem 0xe1620000-0xe162ffff 64bit]
[ 0.600383] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.600467] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.600487] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff]
[ 0.600495] pci 0000:00:19.0: reg 0x14: [mem 0xe1634000-0xe1634fff]
[ 0.600504] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.600563] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.600638] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.600660] pci 0000:00:1a.0: reg 0x10: [mem 0xe1636000-0xe16363ff]
[ 0.600743] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.600825] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.600847] pci 0000:00:1b.0: reg 0x10: [mem 0xe1630000-0xe1633fff 64bit]
[ 0.600924] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.601008] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.601151] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.601259] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.601400] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.601508] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.601685] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.601793] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.601815] pci 0000:00:1d.0: reg 0x10: [mem 0xe1637000-0xe16373ff]
[ 0.601898] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.601979] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.602155] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.602175] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.602183] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.602191] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.602199] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.602206] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.602214] pci 0000:00:1f.2: reg 0x24: [mem 0xe1635000-0xe16357ff]
[ 0.602259] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.602335] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.602353] pci 0000:00:1f.3: reg 0x10: [mem 0xe1638000-0xe16380ff 64bit]
[ 0.602373] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.602549] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[ 0.602593] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.602644] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe14000ff]
[ 0.602977] pci 0000:01:00.0: supports D1 D2
[ 0.602978] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.603216] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.603222] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff]
[ 0.603357] pci 0000:02:00.0: [8086:08b2] type 00 class 0x028000
[ 0.603449] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe1501fff 64bit]
[ 0.603781] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.604038] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.604046] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
[ 0.604130] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.604134] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.604139] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff]
[ 0.604147] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.604362] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.604425] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.604486] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.604547] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.604607] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.604668] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.604728] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.604788] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.605498] ACPI: EC: interrupt unblocked
[ 0.605514] ACPI: EC: event unblocked
[ 0.605522] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.605523] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.605581] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.605581] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.605581] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.605581] vgaarb: loaded
[ 0.605581] ACPI: bus type USB registered
[ 0.605581] usbcore: registered new interface driver usbfs
[ 0.605581] usbcore: registered new interface driver hub
[ 0.605581] usbcore: registered new device driver usb
[ 0.605581] pps_core: LinuxPPS API ver. 1 registered
[ 0.605581] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.605581] PTP clock support registered
[ 0.605581] EDAC MC: Ver: 3.0.0
[ 0.605581] PCI: Using ACPI for IRQ routing
[ 0.605581] PCI: pci_cache_line_size set to 64 bytes
[ 0.605581] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.605581] e820: reserve RAM buffer [mem 0x7ff25000-0x7fffffff]
[ 0.605581] e820: reserve RAM buffer [mem 0x27b600000-0x27bffffff]
[ 0.605581] NetLabel: Initializing
[ 0.605581] NetLabel: domain hash size = 128
[ 0.605581] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.605581] NetLabel: unlabeled traffic allowed by default
[ 0.607417] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.607420] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.609448] clocksource: Switched to clocksource tsc-early
[ 0.617154] VFS: Disk quotas dquot_6.6.0
[ 0.617170] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.617232] pnp: PnP ACPI init
[ 0.617413] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.617414] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.617415] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.617416] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.617418] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.617419] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.617420] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.617421] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.617423] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.617424] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.617429] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.617978] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.617982] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.618019] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.618020] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.618023] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.618041] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.618072] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.618099] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.618124] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.618148] pnp: PnP ACPI: found 7 devices
[ 0.623836] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.623877] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.623884] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff]
[ 0.623896] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.623902] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
[ 0.623912] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.623915] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.623921] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff]
[ 0.623925] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.623933] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.623935] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.623936] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.623937] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.623938] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.623939] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.623940] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.623941] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.623942] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.623943] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.623944] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.623945] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.623946] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.623947] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.623948] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.623949] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.623950] pci_bus 0000:00: resource 20 [mem 0x82a00001-0xefffffff window]
[ 0.623951] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.623952] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff]
[ 0.623954] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff]
[ 0.623955] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.623956] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff]
[ 0.623957] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.624043] NET: Registered protocol family 2
[ 0.624204] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.624231] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.624325] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.624428] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.624459] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.624479] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.624532] NET: Registered protocol family 1
[ 0.624536] NET: Registered protocol family 44
[ 0.624544] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.625225] PCI: CLS 64 bytes, default 64
[ 0.625259] Unpacking initramfs...
[ 0.964749] Freeing initrd memory: 27404K
[ 0.980346] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.980349] software IO TLB: mapped [mem 0x7bf25000-0x7ff25000] (64MB)
[ 0.980535] check: Scanning for low memory corruption every 60 seconds
[ 0.981060] Initialise system trusted keyrings
[ 0.981069] Key type blacklist registered
[ 0.981113] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.982204] zbud: loaded
[ 1.022858] Key type asymmetric registered
[ 1.022860] Asymmetric key parser 'x509' registered
[ 1.022874] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 1.022907] io scheduler mq-deadline registered
[ 1.022908] io scheduler kyber registered
[ 1.022956] io scheduler bfq registered
[ 1.023347] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[ 1.023569] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
[ 1.023804] pcieport 0000:00:1c.2: Signaling PME with IRQ 28
[ 1.023828] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.023952] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.024021] efifb: probing for efifb
[ 1.024023] efi: EFI_MEMMAP is not enabled.
[ 1.024031] fbcon: Taking over console
[ 1.024040] efifb: No BGRT, not showing boot graphics
[ 1.024041] efifb: framebuffer at 0xa0000, using 64k, total 64k
[ 1.024042] efifb: mode is 640x480x1, linelength=80, pages=1
[ 1.024042] efifb: scrolling: redraw
[ 1.024044] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.024122] Console: switching to colour frame buffer device 80x30
[ 1.025733] fb0: EFI VGA frame buffer device
[ 1.025741] intel_idle: MWAIT substates: 0x21120
[ 1.025742] intel_idle: v0.4.1 model 0x3A
[ 1.026095] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.026149] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input0
[ 1.027003] ACPI: Sleep Button [SLPB]
[ 1.027056] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input1
[ 1.027204] ACPI: Lid Switch [LID]
[ 1.027242] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.030330] ACPI: Power Button [PWRF]
[ 1.039640] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.039641] ACPI: Thermal Zone [THM0] (62 C)
[ 1.040539] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.040540] ACPI: Thermal Zone [THM1] (27 C)
[ 1.040710] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.041953] usbcore: registered new interface driver usbserial_generic
[ 1.041957] usbserial: USB Serial support registered for generic
[ 1.041977] rtc_cmos 00:03: RTC can wake from S4
[ 1.042162] rtc_cmos 00:03: registered as rtc0
[ 1.042178] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.042225] intel_pstate: Intel P-state driver initializing
[ 1.042580] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.042991] NET: Registered protocol family 10
[ 1.055494] Segment Routing with IPv6
[ 1.055543] NET: Registered protocol family 17
[ 1.056682] RAS: Correctable Errors collector initialized.
[ 1.056790] microcode: sig=0x306a9, pf=0x10, revision=0x20
[ 1.056962] microcode: Microcode Update Driver: v2.2.
[ 1.057000] sched_clock: Marking stable (1056761488, 207629)->(1070063936, -13094819)
[ 1.057326] registered taskstats version 1
[ 1.057332] Loading compiled-in X.509 certificates
[ 1.061425] Loaded X.509 cert 'Build time autogenerated kernel key: 726e59acc5925f6f0103b4a7df8a50012eb4b1be'
[ 1.061462] zswap: loaded using pool lzo/zbud
[ 1.067384] Key type big_key registered
[ 1.067627] Magic number: 3:857:27
[ 1.067666] memory memory67: hash matches
[ 1.067703] rtc_cmos 00:03: setting system clock to 2019-05-07T13:01:28 UTC (1557234088)
[ 1.068943] Freeing unused decrypted memory: 2040K
[ 1.069425] Freeing unused kernel image memory: 1548K
[ 1.097136] Write protecting the kernel read-only data: 18432k
[ 1.098291] Freeing unused kernel image memory: 2016K
[ 1.098664] Freeing unused kernel image memory: 444K
[ 1.115744] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.115745] x86/mm: Checking user space page tables
[ 1.122505] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.122506] Run /init as init process
[ 1.149189] Linux agpgart interface v0.103
[ 1.185064] VFIO - User Level meta-driver version: 0.3
[ 1.228515] Setting dangerous option enable_fbc - tainting kernel
[ 1.228518] i915: unknown parameter 'lvds_downclock' ignored
[ 1.228519] i915: unknown parameter 'enable_rc6' ignored
[ 1.228520] i915: unknown parameter 'semaphores' ignored
[ 1.229089] checking generic (a0000 10000) vs hw (d0000000 10000000)
[ 1.229090] fb0: switching to inteldrmfb from EFI VGA
[ 1.229105] Console: switching to colour dummy device 80x25
[ 1.229161] [drm] Replacing VGA console driver
[ 1.280394] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.280397] [drm] Driver supports precise vblank timestamp query.
[ 1.281074] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.327409] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0
[ 1.327565] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.347197] acpi device:0d: registered as cooling_device9
[ 1.347287] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.631903] fbcon: inteldrmfb (fb0) is primary device
[ 1.747431] Console: switching to colour frame buffer device 200x56
[ 1.770655] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.809428] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.809430] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.876795] [drm] amdgpu kernel modesetting enabled.
[ 1.876880] CRAT table not found
[ 1.876882] Virtual CRAT table created for CPU
[ 1.876884] Parsing CRAT table with 1 nodes
[ 1.876885] Creating topology SYSFS entries
[ 1.876899] Topology: Add CPU node
[ 1.876900] Finished initializing topology
[ 1.900792] [drm] radeon kernel modesetting enabled.
[ 1.947832] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.949466] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.949502] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.949922] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.951361] ehci-pci: EHCI PCI platform driver
[ 1.951546] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.951552] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.951563] ehci-pci 0000:00:1a.0: debug port 2
[ 1.955463] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.955485] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe1636000
[ 1.961795] sdhci: Secure Digital Host Controller Interface driver
[ 1.961796] sdhci: Copyright(c) Pierre Ossman
[ 1.961871] SCSI subsystem initialized
[ 1.965210] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 1.965626] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.966031] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 1.966126] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.966979] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.967035] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[ 1.967037] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.967038] usb usb1: Product: EHCI Host Controller
[ 1.967039] usb usb1: Manufacturer: Linux 5.0.13-arch1-1-ARCH ehci_hcd
[ 1.967040] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.967149] hub 1-0:1.0: USB hub found
[ 1.967157] hub 1-0:1.0: 3 ports detected
[ 1.967294] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.967299] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.968343] libata version 3.00 loaded.
[ 1.968388] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[ 1.968393] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.968536] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[ 1.968537] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.968538] usb usb2: Product: xHCI Host Controller
[ 1.968539] usb usb2: Manufacturer: Linux 5.0.13-arch1-1-ARCH xhci-hcd
[ 1.968540] usb usb2: SerialNumber: 0000:00:14.0
[ 1.968609] hub 2-0:1.0: USB hub found
[ 1.968618] hub 2-0:1.0: 4 ports detected
[ 1.968727] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.968733] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 1.968739] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.968741] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.968742] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.968751] ehci-pci 0000:00:1d.0: debug port 2
[ 1.968775] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[ 1.968776] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.968777] usb usb4: Product: xHCI Host Controller
[ 1.968778] usb usb4: Manufacturer: Linux 5.0.13-arch1-1-ARCH xhci-hcd
[ 1.968778] usb usb4: SerialNumber: 0000:00:14.0
[ 1.968843] hub 4-0:1.0: USB hub found
[ 1.968857] hub 4-0:1.0: 4 ports detected
[ 1.970977] ahci 0000:00:1f.2: version 3.0
[ 1.971131] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.971221] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[ 1.971223] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.971650] scsi host0: ahci
[ 1.971807] scsi host1: ahci
[ 1.971907] scsi host2: ahci
[ 1.971994] scsi host3: ahci
[ 1.972096] scsi host4: ahci
[ 1.972155] scsi host5: ahci
[ 1.972190] ata1: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635100 irq 31
[ 1.972192] ata2: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635180 irq 31
[ 1.972194] ata3: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635200 irq 31
[ 1.972195] ata4: DUMMY
[ 1.972197] ata5: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635300 irq 31
[ 1.972197] ata6: DUMMY
[ 1.972672] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.972685] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe1637000
[ 1.977159] random: fast init done
[ 1.983672] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.983716] tsc: Refined TSC clocksource calibration: 2693.881 MHz
[ 1.983731] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d4aa266ff, max_idle_ns: 440795313891 ns
[ 1.983770] clocksource: Switched to clocksource tsc
[ 1.983955] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[ 1.983957] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.983958] usb usb3: Product: EHCI Host Controller
[ 1.983959] usb usb3: Manufacturer: Linux 5.0.13-arch1-1-ARCH ehci_hcd
[ 1.983960] usb usb3: SerialNumber: 0000:00:1d.0
[ 1.984182] hub 3-0:1.0: USB hub found
[ 1.984204] hub 3-0:1.0: 3 ports detected
[ 2.283971] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.284125] ata1.00: supports DRM functions and may not be fully accessible
[ 2.284507] ata1.00: disabling queued TRIM support
[ 2.284509] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0DB6Q, max UDMA/133
[ 2.284511] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 2.285043] ata1.00: supports DRM functions and may not be fully accessible
[ 2.285420] ata1.00: disabling queued TRIM support
[ 2.285809] ata1.00: configured for UDMA/133
[ 2.296017] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5
[ 2.296974] usb 2-4: new high-speed USB device number 2 using xhci_hcd
[ 2.300304] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.316972] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 2.445825] usb 2-4: New USB device found, idVendor=413c, idProduct=818d, bcdDevice= 0.00
[ 2.445830] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.445832] usb 2-4: Product: DW5550
[ 2.445834] usb 2-4: Manufacturer: Dell
[ 2.445836] usb 2-4: SerialNumber: 4AF247865D7ED400
[ 2.447492] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.447496] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.447905] hub 1-1:1.0: USB hub found
[ 2.448026] hub 1-1:1.0: 6 ports detected
[ 2.464571] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.464576] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.465195] hub 3-1:1.0: USB hub found
[ 2.465385] hub 3-1:1.0: 8 ports detected
[ 2.611431] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.613008] ata2.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
[ 2.613013] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.614907] ata2.00: configured for UDMA/133
[ 2.615647] scsi 1:0:0:0: Direct-Access ATA HGST HTS541010A9 A560 PQ: 0 ANSI: 5
[ 2.727076] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 2.743736] usb 3-1.8: new high-speed USB device number 3 using ehci-pci
[ 2.831066] usb 1-1.1: New USB device found, idVendor=17ef, idProduct=1003, bcdDevice= 1.00
[ 2.831071] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.831074] usb 1-1.1: Product: Integrated Smart Card Reader
[ 2.831076] usb 1-1.1: Manufacturer: Lenovo
[ 2.840934] usb 3-1.8: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00
[ 2.840939] usb 3-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.841371] hub 3-1.8:1.0: USB hub found
[ 2.841577] hub 3-1.8:1.0: 6 ports detected
[ 2.907072] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[ 2.931357] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.005385] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01
[ 3.005390] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.005393] usb 1-1.3: Product: Biometric Coprocessor
[ 3.005395] usb 1-1.3: Manufacturer: Auth
[ 3.077077] usb 1-1.5: new full-speed USB device number 5 using ehci-pci
[ 3.120408] usb 3-1.8.2: new full-speed USB device number 4 using ehci-pci
[ 3.176250] usb 1-1.5: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
[ 3.176255] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.223969] usb 3-1.8.2: New USB device found, idVendor=045e, idProduct=0719, bcdDevice= 1.00
[ 3.223974] usb 3-1.8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.223977] usb 3-1.8.2: Product: Xbox 360 Wireless Receiver for Windows
[ 3.223979] usb 3-1.8.2: Manufacturer: ©Microsoft
[ 3.223981] usb 3-1.8.2: SerialNumber: E01578E0
[ 3.244357] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.253685] usb 1-1.6: new high-speed USB device number 6 using ehci-pci
[ 3.256183] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 3.256184] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 3.256197] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.256199] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.256213] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 3.256219] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.256250] sd 0:0:0:0: [sda] Write Protect is off
[ 3.256255] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.256307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.257674] sda: sda1 sda2 sda3 sda4
[ 3.258528] sd 0:0:0:0: [sda] supports TCG Opal
[ 3.258530] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.313755] usb 3-1.8.3: new full-speed USB device number 5 using ehci-pci
[ 3.358358] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2db, bcdDevice= 5.64
[ 3.358373] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.358376] usb 1-1.6: Product: Integrated Camera
[ 3.358378] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 3.412254] usb 3-1.8.3: New USB device found, idVendor=2516, idProduct=0020, bcdDevice= 1.22
[ 3.412259] usb 3-1.8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.412261] usb 3-1.8.3: Product: Quickfire Rapid i
[ 3.412264] usb 3-1.8.3: Manufacturer: CM Storm
[ 3.421333] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.427049] usbcore: registered new interface driver usbhid
[ 3.427050] usbhid: USB HID core driver
[ 3.428527] input: CM Storm Quickfire Rapid i as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.3/3-1.8.3:1.0/0003:2516:0020.0001/input/input6
[ 3.483988] hid-generic 0003:2516:0020.0001: input,hidraw0: USB HID v1.11 Keyboard [CM Storm Quickfire Rapid i] on usb-0000:00:1d.0-1.8.3/input0
[ 3.484509] hid-generic 0003:2516:0020.0002: hiddev0,hidraw1: USB HID v1.11 Device [CM Storm Quickfire Rapid i] on usb-0000:00:1d.0-1.8.3/input1
[ 3.484886] input: CM Storm Quickfire Rapid i System Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.3/3-1.8.3:1.2/0003:2516:0020.0003/input/input7
[ 3.500410] usb 3-1.8.6: new high-speed USB device number 6 using ehci-pci
[ 3.540558] input: CM Storm Quickfire Rapid i Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.3/3-1.8.3:1.2/0003:2516:0020.0003/input/input8
[ 3.540629] input: CM Storm Quickfire Rapid i Keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.3/3-1.8.3:1.2/0003:2516:0020.0003/input/input9
[ 3.540767] hid-generic 0003:2516:0020.0003: input,hidraw2: USB HID v1.11 Keyboard [CM Storm Quickfire Rapid i] on usb-0000:00:1d.0-1.8.3/input2
[ 3.542099] sdb: sdb1
[ 3.543281] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.597475] usb 3-1.8.6: New USB device found, idVendor=0424, idProduct=2512, bcdDevice= b.b3
[ 3.597479] usb 3-1.8.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.597821] hub 3-1.8.6:1.0: USB hub found
[ 3.597898] hub 3-1.8.6:1.0: 2 ports detected
[ 3.660306] raid6: sse2x4 gen() 15145 MB/s
[ 3.716973] raid6: sse2x4 xor() 10352 MB/s
[ 3.773648] raid6: sse2x2 gen() 13071 MB/s
[ 3.830307] raid6: sse2x2 xor() 8872 MB/s
[ 3.886971] raid6: sse2x1 gen() 11088 MB/s
[ 3.943632] raid6: sse2x1 xor() 7923 MB/s
[ 3.943633] raid6: using algorithm sse2x4 gen() 15145 MB/s
[ 3.943633] raid6: .... xor() 10352 MB/s, rmw enabled
[ 3.943634] raid6: using ssse3x2 recovery algorithm
[ 3.944628] xor: automatically using best checksumming function avx
[ 3.973645] usb 3-1.8.4: new full-speed USB device number 7 using ehci-pci
[ 3.974281] Btrfs loaded, crc32c=crc32c-intel
[ 3.975608] BTRFS: device fsid 409c0333-c8b1-4428-889b-f838f6f3dd3c devid 1 transid 352564 /dev/sda4
[ 4.030049] BTRFS info (device sda4): disk space caching is enabled
[ 4.030051] BTRFS info (device sda4): has skinny extents
[ 4.066955] BTRFS info (device sda4): enabling ssd optimizations
[ 4.074440] usb 3-1.8.4: New USB device found, idVendor=1af3, idProduct=0001, bcdDevice= 0.01
[ 4.074444] usb 3-1.8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.074447] usb 3-1.8.4: Product: ZOWIE Gaming mouse
[ 4.074449] usb 3-1.8.4: Manufacturer: Kingsis Peripherals
[ 4.076807] input: Kingsis Peripherals ZOWIE Gaming mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.4/3-1.8.4:1.0/0003:1AF3:0001.0004/input/input10
[ 4.076914] hid-generic 0003:1AF3:0001.0004: input,hidraw3: USB HID v1.11 Mouse [Kingsis Peripherals ZOWIE Gaming mouse] on usb-0000:00:1d.0-1.8.4/input0
[ 4.459969] systemd[1]: systemd 242.19-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 4.473857] systemd[1]: Detected architecture x86-64.
[ 4.479041] systemd[1]: Set hostname to <Nozomi-4>.
[ 4.580107] systemd-fstab-generator[334]: x-systemd.device-timeout ignored for server.nozomi.space:/media
[ 4.718443] systemd[1]: /usr/lib/systemd/system/gssproxy.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/gssproxy.pid /run/gssproxy.pid; please update the unit file accordingly.
[ 4.719159] systemd[1]: /usr/lib/systemd/system/rpc-statd.service:12: PIDFile= references a path below legacy directory /var/run/, updating /var/run/rpc.statd.pid /run/rpc.statd.pid; please update the unit file accordingly.
[ 4.724872] systemd[1]: /usr/lib/systemd/system/virtlogd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlogd-sock /run/libvirt/virtlogd-sock; please update the unit file accordingly.
[ 4.725131] systemd[1]: /usr/lib/systemd/system/virtlogd-admin.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlogd-admin-sock /run/libvirt/virtlogd-admin-sock; please update the unit file accordingly.
[ 4.728353] systemd[1]: /usr/lib/systemd/system/virtlockd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-sock /run/libvirt/virtlockd-sock; please update the unit file accordingly.
[ 4.728595] systemd[1]: /usr/lib/systemd/system/virtlockd-admin.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-admin-sock /run/libvirt/virtlockd-admin-sock; please update the unit file accordingly.
[ 4.743604] systemd[1]: Listening on LVM2 poll daemon socket.
[ 4.770357] random: lvm: uninitialized urandom read (4 bytes read)
[ 4.781466] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.781499] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.824972] i2c /dev entries driver
[ 4.825353] BTRFS info (device sda4): use zstd compression, level 0
[ 4.825354] BTRFS info (device sda4): disk space caching is enabled
[ 4.834798] random: systemd-random-: uninitialized urandom read (512 bytes read)
[ 4.946441] audit: type=1130 audit(1557234092.372:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.957862] systemd-journald[343]: Received request to flush runtime journal from PID 1
[ 5.146220] audit: type=1130 audit(1557234092.572:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.335118] audit: type=1130 audit(1557234092.762:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hwdb-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.555621] audit: type=1130 audit(1557234092.982:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.616634] ACPI: AC Adapter [AC] (on-line)
[ 5.627164] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 5.627497] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 5.629452] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20181213/utaddress-213)
[ 5.629458] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.629461] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213)
[ 5.629464] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.629465] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213)
[ 5.629467] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.629468] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213)
[ 5.629471] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.629471] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.642799] audit: type=1130 audit(1557234093.069:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:acpi_video0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.644943] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 5.644944] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 5.645001] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 5.645060] Non-volatile memory driver v1.3
[ 5.645186] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 5.656444] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 5.656445] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 5.656446] thinkpad_acpi: ThinkPad BIOS CBET4000 4.9-1538-g0de835d52e-dirty, EC G1HT32WW-3.22
[ 5.656446] thinkpad_acpi: Lenovo ThinkPad T430, model 2347B85
[ 5.657472] thinkpad_acpi: radio switch found; radios are enabled
[ 5.657594] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 5.657608] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 5.657609] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 5.661007] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[ 5.664023] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 5.664100] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 5.667333] thinkpad_acpi: battery 1 registered (start 80, stop 85)
[ 5.667339] battery: new extension: ThinkPad Battery Extension
[ 5.667395] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input11
[ 5.672239] audit: type=1130 audit(1557234093.099:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:intel_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.673723] input: PC Speaker as /devices/platform/pcspkr/input/input12
[ 5.674037] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 5.674038] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 5.674039] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 5.674039] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 5.674238] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 5.692510] snd_hda_intel 0000:00:1b.0: Linked as a consumer to 0000:00:02.0
[ 5.692552] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 5.693549] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.701068] cryptd: max_cpu_qlen set to 1000
[ 5.714239] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.718334] AVX version of gcm_enc/dec engaged.
[ 5.718336] AES CTR mode by8 optimization enabled
[ 5.723280] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3202: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 5.723283] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.723285] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 5.723286] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 5.723288] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 5.723289] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 5.723291] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 5.723292] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 5.750734] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 5.750933] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 5.750970] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 5.751003] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 5.751035] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 5.751083] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 5.751136] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 5.751183] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ 5.753060] Intel(R) Wireless WiFi driver for Linux
[ 5.753061] Copyright(c) 2003- 2015 Intel Corporation
[ 5.755850] iTCO_vendor_support: vendor-support=0
[ 5.758152] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.758204] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 5.758311] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.759615] iwlwifi 0000:02:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm
[ 5.792463] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 5.860309] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[ 5.879306] iwlwifi 0000:02:00.0: base HW address: a0:a8:cd:96:e9:2a
[ 5.886387] intel_rapl: Found RAPL domain package
[ 5.886389] intel_rapl: Found RAPL domain core
[ 5.886390] intel_rapl: Found RAPL domain uncore
[ 5.916208] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:12:10:56
[ 5.916215] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 5.916247] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 5.954022] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 6.117401] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 6.119954] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 6.294646] audit: type=1130 audit(1557234093.722:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.326947] fuse init (API version 7.28)
[ 6.340272] audit: type=1130 audit(1557234093.766:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-8341\x2d0397 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.392541] audit: type=1130 audit(1557234093.819:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.396371] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[ 6.411678] audit: type=1305 audit(1557234093.839:11): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 res=1
[ 6.411682] audit: type=1305 audit(1557234093.839:12): audit_pid=749 old=0 auid=4294967295 ses=4294967295 res=1
[ 6.421956] random: mktemp: uninitialized urandom read (8 bytes read)
[ 6.429763] RPC: Registered named UNIX socket transport module.
[ 6.429764] RPC: Registered udp transport module.
[ 6.429765] RPC: Registered tcp transport module.
[ 6.429765] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.451036] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
[ 6.451041] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 6.486754] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input13
[ 6.489813] mousedev: PS/2 mouse device common for all mice
[ 6.500223] random: crng init done
[ 6.896796] cdc_wdm 2-4:1.5: cdc-wdm1: USB WDM device
[ 6.897448] cdc_wdm 2-4:1.8: cdc-wdm2: USB WDM device
[ 6.897492] usbcore: registered new interface driver cdc_wdm
[ 6.897667] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
[ 6.899026] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
[ 6.936556] cdc_ncm 2-4:1.6: MAC-Address: 02:80:37:ec:02:00
[ 6.938495] cdc_ncm 2-4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:14.0-4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 6.939206] usbcore: registered new interface driver cdc_ncm
[ 6.939508] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
[ 6.940038] usbcore: registered new interface driver cdc_acm
[ 6.940039] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 6.943141] usbcore: registered new interface driver cdc_mbim
[ 6.952134] cdc_ncm 2-4:1.6 wwp0s20u4i6: renamed from wwan0
[ 7.345600] media: Linux media interface: v0.10
[ 7.364502] videodev: Linux video capture interface: v2.00
[ 7.415810] Bluetooth: Core ver 2.22
[ 7.416313] NET: Registered protocol family 31
[ 7.416314] Bluetooth: HCI device and connection manager initialized
[ 7.416318] Bluetooth: HCI socket layer initialized
[ 7.416320] Bluetooth: L2CAP socket layer initialized
[ 7.416325] Bluetooth: SCO socket layer initialized
[ 7.454427] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2db)
[ 7.460218] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 7.460221] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 7.460222] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 7.460224] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 7.460294] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input23
[ 7.460391] usbcore: registered new interface driver uvcvideo
[ 7.460392] USB Video Class driver (1.1.1)
[ 7.494144] usbcore: registered new interface driver btusb
[ 7.510750] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 7.515179] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 7.538066] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.538068] Bluetooth: BNEP filters: protocol multicast
[ 7.538072] Bluetooth: BNEP socket layer initialized
[ 7.733746] Bluetooth: hci0: Intel firmware patch completed and activated
[ 8.068381] loop: module loaded
[ 8.091621] usbcore: registered new interface driver xpad
[ 8.303336] systemd-fstab-generator[1272]: x-systemd.device-timeout ignored for server.nozomi.space:/media
[ 8.450572] Adding 524284k swap on /dev/loop0. Priority:-2 extents:1 across:524284k FS
[ 8.541704] cdc_wdm 2-4:1.8: wdm_int_callback - 0 bytes
[ 8.541709] cdc_wdm 2-4:1.5: wdm_int_callback - 0 bytes
[ 10.109662] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 10.109697] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 11.256986] Bluetooth: RFCOMM TTY layer initialized
[ 11.256993] Bluetooth: RFCOMM socket layer initialized
[ 11.256999] Bluetooth: RFCOMM ver 1.11
[ 19.159131] rfkill: input handler disabled