blob: 95450a43cab8984e7f0758b9d79dfd3debe88eba [file] [log] [blame]
[ 0.000000] Linux version 5.0.7-arch1-1-ARCH (builduser@heftig-20167) (gcc version 8.2.1 20181127 (GCC)) #1 SMP PREEMPT Mon Apr 8 10:37:08 UTC 2019
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=409c0333-c8b1-4428-889b-f838f6f3dd3c rw iomem=relaxed amdgpu.dpm=1 amdgpu.dc=1 amdgpu.ppfeaturemask=0xffffffff
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff24fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff25000-0x00000000829fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027b5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 2347B85/2347B85, BIOS CBET4000 4.9-1306-gcef9879c3d 04/12/2019
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2693.770 MHz processor
[ 0.002507] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.002508] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.002512] last_pfn = 0x27b600 max_arch_pfn = 0x400000000
[ 0.002516] MTRR default type: uncachable
[ 0.002517] MTRR fixed ranges enabled:
[ 0.002518] 00000-9FFFF write-back
[ 0.002519] A0000-BFFFF uncachable
[ 0.002520] C0000-FFFFF write-back
[ 0.002520] MTRR variable ranges enabled:
[ 0.002522] 0 base 000000000 mask F80000000 write-back
[ 0.002523] 1 base 0D0000000 mask FF0000000 write-combining
[ 0.002524] 2 base 100000000 mask F00000000 write-back
[ 0.002525] 3 base 200000000 mask F80000000 write-back
[ 0.002525] 4 disabled
[ 0.002526] 5 disabled
[ 0.002526] 6 disabled
[ 0.002527] 7 disabled
[ 0.002527] 8 disabled
[ 0.002528] 9 disabled
[ 0.003399] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.003574] last_pfn = 0x7ff25 max_arch_pfn = 0x400000000
[ 0.013720] check: Scanning 1 areas for low memory corruption
[ 0.013723] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[ 0.013728] BRK [0x236201000, 0x236201fff] PGTABLE
[ 0.013730] BRK [0x236202000, 0x236202fff] PGTABLE
[ 0.013731] BRK [0x236203000, 0x236203fff] PGTABLE
[ 0.013751] BRK [0x236204000, 0x236204fff] PGTABLE
[ 0.013753] BRK [0x236205000, 0x236205fff] PGTABLE
[ 0.013823] BRK [0x236206000, 0x236206fff] PGTABLE
[ 0.013844] BRK [0x236207000, 0x236207fff] PGTABLE
[ 0.013948] RAMDISK: [mem 0x34a09000-0x364fbfff]
[ 0.013953] ACPI: Early table checksum verification disabled
[ 0.014020] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4)
[ 0.014022] ACPI: XSDT 0x000000007FF4B0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20180810)
[ 0.014028] ACPI: FACP 0x000000007FF4EB20 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20180810)
[ 0.014033] ACPI: DSDT 0x000000007FF4B280 003899 (v02 COREv4 COREBOOT 20141018 INTL 20180810)
[ 0.014036] ACPI: FACS 0x000000007FF4B240 000040
[ 0.014038] ACPI: FACS 0x000000007FF4B240 000040
[ 0.014040] ACPI: SSDT 0x000000007FF4EC20 003094 (v02 COREv4 COREBOOT 0000002A CORE 20180810)
[ 0.014043] ACPI: MCFG 0x000000007FF51CC0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20180810)
[ 0.014046] ACPI: TCPA 0x000000007FF51D00 000032 (v02 COREv4 COREBOOT 00000000 CORE 20180810)
[ 0.014049] ACPI: APIC 0x000000007FF51D40 00008C (v02 COREv4 COREBOOT 00000000 CORE 20180810)
[ 0.014051] ACPI: DMAR 0x000000007FF51DD0 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20180810)
[ 0.014054] ACPI: HPET 0x000000007FF51EA0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20180810)
[ 0.014062] ACPI: Local APIC address 0xfee00000
[ 0.014138] No NUMA configuration found
[ 0.014139] Faking a node at [mem 0x0000000000000000-0x000000027b5fffff]
[ 0.014141] NODE_DATA(0) allocated [mem 0x27b5f7000-0x27b5fafff]
[ 0.014163] Zone ranges:
[ 0.014164] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.014165] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.014166] Normal [mem 0x0000000100000000-0x000000027b5fffff]
[ 0.014167] Device empty
[ 0.014167] Movable zone start for each node
[ 0.014168] Early memory node ranges
[ 0.014169] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.014170] node 0: [mem 0x0000000000100000-0x000000007ff24fff]
[ 0.014170] node 0: [mem 0x0000000100000000-0x000000027b5fffff]
[ 0.014179] Zeroed struct page in unavailable ranges: 317 pages
[ 0.014181] Initmem setup node 0 [mem 0x0000000000001000-0x000000027b5fffff]
[ 0.014182] On node 0 totalpages: 2077891
[ 0.014183] DMA zone: 64 pages used for memmap
[ 0.014183] DMA zone: 21 pages reserved
[ 0.014184] DMA zone: 3998 pages, LIFO batch:0
[ 0.014282] DMA32 zone: 8125 pages used for memmap
[ 0.014283] DMA32 zone: 519973 pages, LIFO batch:63
[ 0.027881] Normal zone: 24280 pages used for memmap
[ 0.027883] Normal zone: 1553920 pages, LIFO batch:63
[ 0.064330] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
[ 0.064522] ACPI: PM-Timer IO Port: 0x508
[ 0.064525] ACPI: Local APIC address 0xfee00000
[ 0.064541] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.064544] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.064545] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.064547] ACPI: IRQ0 used by override.
[ 0.064548] ACPI: IRQ9 used by override.
[ 0.064549] Using ACPI (MADT) for SMP configuration information
[ 0.064551] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.064556] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.064565] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.064566] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.064567] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.064567] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.064568] PM: Registered nosave memory: [mem 0x7ff25000-0x829fffff]
[ 0.064569] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[ 0.064570] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.064570] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[ 0.064571] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.064571] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.064572] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.064572] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.064574] [mem 0x82a00000-0xefffffff] available for PCI devices
[ 0.064575] Booting paravirtualized kernel on bare hardware
[ 0.064577] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.183138] random: get_random_bytes called from start_kernel+0x95/0x538 with crng_init=0
[ 0.183144] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.183319] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u262144
[ 0.183324] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[ 0.183325] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.183339] Built 1 zonelists, mobility grouping on. Total pages: 2045401
[ 0.183340] Policy zone: Normal
[ 0.183342] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=409c0333-c8b1-4428-889b-f838f6f3dd3c rw iomem=relaxed amdgpu.dpm=1 amdgpu.dc=1 amdgpu.ppfeaturemask=0xffffffff
[ 0.186724] Calgary: detecting Calgary via BIOS EBDA area
[ 0.186726] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.206613] Memory: 8056580K/8311564K available (12291K kernel code, 1286K rwdata, 3720K rodata, 1536K init, 3900K bss, 254984K reserved, 0K cma-reserved)
[ 0.206757] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.206762] Kernel/User page tables isolation: enabled
[ 0.206777] ftrace: allocating 35897 entries in 141 pages
[ 0.220222] rcu: Preemptible hierarchical RCU implementation.
[ 0.220223] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.220224] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.220224] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.220225] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.220226] Tasks RCU enabled.
[ 0.220226] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.220227] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.221714] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[ 0.221872] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.221917] Console: colour dummy device 80x25
[ 0.221921] printk: console [tty0] enabled
[ 0.221937] ACPI: Core revision 20181213
[ 0.222086] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.222096] hpet clockevent registered
[ 0.222100] APIC: Switch to symmetric I/O mode setup
[ 0.222101] DMAR: Host address width 36
[ 0.222103] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.222107] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.222108] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff
[ 0.222109] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.222111] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.222113] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.222113] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.222114] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.222512] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.222513] x2apic enabled
[ 0.222518] Switched APIC routing to cluster x2apic.
[ 0.222942] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.238769] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d440df2e9, max_idle_ns: 440795209290 ns
[ 0.238782] Calibrating delay loop (skipped), value calculated using timer frequency.. 5389.02 BogoMIPS (lpj=8979233)
[ 0.238784] pid_max: default: 32768 minimum: 301
[ 0.238814] LSM: Security Framework initializing
[ 0.238815] Yama: becoming mindful.
[ 0.238819] AppArmor: AppArmor disabled by boot time parameter
[ 0.239946] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.240526] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.240556] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.240573] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.240796] mce: CPU supports 9 MCE banks
[ 0.240805] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.240816] process: using mwait in idle threads
[ 0.240819] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.240820] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.240822] Spectre V2 : Mitigation: Full generic retpoline
[ 0.240822] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.240823] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.240831] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.240831] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.240833] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.240991] Freeing SMP alternatives memory: 32K
[ 0.241911] TSC deadline timer enabled
[ 0.241915] smpboot: CPU0: Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.258786] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.258827] ... version: 3
[ 0.258829] ... bit width: 48
[ 0.258830] ... generic registers: 4
[ 0.258832] ... value mask: 0000ffffffffffff
[ 0.258843] ... max period: 00007fffffffffff
[ 0.258843] ... fixed-purpose events: 3
[ 0.258844] ... event mask: 000000070000000f
[ 0.265444] rcu: Hierarchical SRCU implementation.
[ 0.288947] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.295456] smp: Bringing up secondary CPUs ...
[ 0.335465] x86: Booting SMP configuration:
[ 0.335467] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.581871] smp: Brought up 1 node, 8 CPUs
[ 0.581871] smpboot: Max logical packages: 1
[ 0.581871] smpboot: Total of 8 processors activated (43117.16 BogoMIPS)
[ 0.582401] devtmpfs: initialized
[ 0.582401] x86/mm: Memory block size: 128MB
[ 0.582769] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.582769] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.582769] pinctrl core: initialized pinctrl subsystem
[ 0.582769] RTC time: 02:39:41, date: 2019-04-13
[ 0.582769] NET: Registered protocol family 16
[ 0.582769] audit: initializing netlink subsys (disabled)
[ 0.582769] audit: type=2000 audit(1555123181.359:1): state=initialized audit_enabled=0 res=1
[ 0.585457] cpuidle: using governor ladder
[ 0.585467] cpuidle: using governor menu
[ 0.585492] ACPI: bus type PCI registered
[ 0.585493] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.585561] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.585564] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.585572] PCI: Using configuration type 1 for base access
[ 0.585604] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.586655] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.586655] ACPI: Added _OSI(Module Device)
[ 0.586655] ACPI: Added _OSI(Processor Device)
[ 0.586655] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.586655] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.586655] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.586655] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.586655] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.588344] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.592113] ACPI: EC: EC started
[ 0.592113] ACPI: EC: interrupt blocked
[ 0.592113] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.592113] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.592113] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.592113] ACPI: Interpreter enabled
[ 0.592113] ACPI: (supports S0 S3 S4 S5)
[ 0.592113] ACPI: Using IOAPIC for interrupt routing
[ 0.592113] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.592113] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.598048] ACPI: Power Resource [FPWR] (off)
[ 0.598462] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.598467] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.598531] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.598542] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.598816] PCI host bridge to bus 0000:00
[ 0.598819] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.598820] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.598822] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.598823] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.598824] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.598825] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.598827] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.598828] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.598829] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.598830] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.598832] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.598833] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.598834] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.598835] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.598836] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.598838] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.598839] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window]
[ 0.598840] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.598842] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.598849] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.598950] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.598960] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
[ 0.598965] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.598969] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.599069] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.599093] pci 0000:00:14.0: reg 0x10: [mem 0xe1620000-0xe162ffff 64bit]
[ 0.599162] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.599249] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.599268] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff]
[ 0.599277] pci 0000:00:19.0: reg 0x14: [mem 0xe1634000-0xe1634fff]
[ 0.599285] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.599344] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.599423] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.599445] pci 0000:00:1a.0: reg 0x10: [mem 0xe1636000-0xe16363ff]
[ 0.599528] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.599613] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.599635] pci 0000:00:1b.0: reg 0x10: [mem 0xe1630000-0xe1633fff 64bit]
[ 0.599708] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.599795] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.599937] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.600049] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.600190] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.600299] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.600477] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.600588] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.600611] pci 0000:00:1d.0: reg 0x10: [mem 0xe1637000-0xe16373ff]
[ 0.600694] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.600780] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.600961] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.600981] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.600989] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.600997] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.601005] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.601013] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.601022] pci 0000:00:1f.2: reg 0x24: [mem 0xe1635000-0xe16357ff]
[ 0.601066] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.601144] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.601162] pci 0000:00:1f.3: reg 0x10: [mem 0xe1638000-0xe16380ff 64bit]
[ 0.601183] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.601363] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[ 0.601405] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.601458] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe14000ff]
[ 0.601789] pci 0000:01:00.0: supports D1 D2
[ 0.601790] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.602030] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.602036] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff]
[ 0.602189] pci 0000:02:00.0: [8086:08b2] type 00 class 0x028000
[ 0.602280] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe1501fff 64bit]
[ 0.602572] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.602836] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.602844] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
[ 0.602937] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.602942] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.602947] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff]
[ 0.602955] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.603177] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.603243] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.603307] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.603370] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.603433] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.603495] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.603558] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.603621] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.604271] ACPI: EC: interrupt unblocked
[ 0.604271] ACPI: EC: event unblocked
[ 0.604271] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.604271] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.604271] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.604271] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.604271] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.604271] vgaarb: loaded
[ 0.604271] ACPI: bus type USB registered
[ 0.604271] usbcore: registered new interface driver usbfs
[ 0.604271] usbcore: registered new interface driver hub
[ 0.604280] usbcore: registered new device driver usb
[ 0.604280] pps_core: LinuxPPS API ver. 1 registered
[ 0.604280] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.604280] PTP clock support registered
[ 0.604280] EDAC MC: Ver: 3.0.0
[ 0.604280] PCI: Using ACPI for IRQ routing
[ 0.606408] PCI: pci_cache_line_size set to 64 bytes
[ 0.606486] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.606488] e820: reserve RAM buffer [mem 0x7ff25000-0x7fffffff]
[ 0.606489] e820: reserve RAM buffer [mem 0x27b600000-0x27bffffff]
[ 0.606574] NetLabel: Initializing
[ 0.606575] NetLabel: domain hash size = 128
[ 0.606575] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.606588] NetLabel: unlabeled traffic allowed by default
[ 0.606592] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.606592] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.608827] clocksource: Switched to clocksource tsc-early
[ 0.618901] VFS: Disk quotas dquot_6.6.0
[ 0.618918] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.618982] pnp: PnP ACPI init
[ 0.619163] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.619164] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.619166] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.619167] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.619169] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.619170] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.619172] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.619173] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.619175] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.619177] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.619182] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.619689] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.619694] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.619729] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.619731] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.619734] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.619753] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.619784] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.619810] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.619836] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.619859] pnp: PnP ACPI: found 7 devices
[ 0.625566] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.625607] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.625615] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff]
[ 0.625626] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.625633] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
[ 0.625645] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.625648] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.625654] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff]
[ 0.625660] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.625669] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.625670] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.625672] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.625673] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.625674] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.625676] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.625677] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.625678] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.625680] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.625681] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.625682] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.625684] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.625685] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.625686] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.625688] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.625689] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.625690] pci_bus 0000:00: resource 20 [mem 0x82a00001-0xefffffff window]
[ 0.625692] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.625693] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff]
[ 0.625695] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff]
[ 0.625696] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.625697] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff]
[ 0.625699] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.625785] NET: Registered protocol family 2
[ 0.625944] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.625970] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.626078] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.626184] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.626213] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.626232] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.626284] NET: Registered protocol family 1
[ 0.626288] NET: Registered protocol family 44
[ 0.626297] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.626992] PCI: CLS 64 bytes, default 64
[ 0.627025] Unpacking initramfs...
[ 0.963324] Freeing initrd memory: 27596K
[ 0.982153] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.982157] software IO TLB: mapped [mem 0x7bf25000-0x7ff25000] (64MB)
[ 0.982337] check: Scanning for low memory corruption every 60 seconds
[ 0.982866] Initialise system trusted keyrings
[ 0.982874] Key type blacklist registered
[ 0.982919] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.984038] zbud: loaded
[ 1.025004] Key type asymmetric registered
[ 1.025006] Asymmetric key parser 'x509' registered
[ 1.025019] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 1.025052] io scheduler mq-deadline registered
[ 1.025053] io scheduler kyber registered
[ 1.025102] io scheduler bfq registered
[ 1.025504] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[ 1.025730] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
[ 1.025953] pcieport 0000:00:1c.2: Signaling PME with IRQ 28
[ 1.025979] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.026110] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.026179] efifb: probing for efifb
[ 1.026181] efi: EFI_MEMMAP is not enabled.
[ 1.026189] fbcon: Taking over console
[ 1.026198] efifb: No BGRT, not showing boot graphics
[ 1.026199] efifb: framebuffer at 0xa0000, using 64k, total 64k
[ 1.026200] efifb: mode is 640x480x1, linelength=80, pages=1
[ 1.026200] efifb: scrolling: redraw
[ 1.026202] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.026284] Console: switching to colour frame buffer device 80x30
[ 1.027884] fb0: EFI VGA frame buffer device
[ 1.027892] intel_idle: MWAIT substates: 0x21120
[ 1.027893] intel_idle: v0.4.1 model 0x3A
[ 1.028238] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.028300] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input0
[ 1.028341] ACPI: Sleep Button [SLPB]
[ 1.028390] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input1
[ 1.028405] ACPI: Lid Switch [LID]
[ 1.028445] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.028455] ACPI: Power Button [PWRF]
[ 1.032249] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.032251] ACPI: Thermal Zone [THM0] (55 C)
[ 1.033141] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.033142] ACPI: Thermal Zone [THM1] (27 C)
[ 1.033289] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.034493] usbcore: registered new interface driver usbserial_generic
[ 1.034497] usbserial: USB Serial support registered for generic
[ 1.034516] rtc_cmos 00:03: RTC can wake from S4
[ 1.034650] rtc_cmos 00:03: registered as rtc0
[ 1.034664] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.034706] intel_pstate: Intel P-state driver initializing
[ 1.035141] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.035631] NET: Registered protocol family 10
[ 1.048369] Segment Routing with IPv6
[ 1.048412] NET: Registered protocol family 17
[ 1.049296] RAS: Correctable Errors collector initialized.
[ 1.049390] microcode: sig=0x306a9, pf=0x10, revision=0x20
[ 1.049598] microcode: Microcode Update Driver: v2.2.
[ 1.049617] sched_clock: Marking stable (1049376922, 211524)->(1059825841, -10237395)
[ 1.050372] registered taskstats version 1
[ 1.050383] Loading compiled-in X.509 certificates
[ 1.058868] Loaded X.509 cert 'Build time autogenerated kernel key: 89546a39deaf547f25e84b2ed55afaec0c8c176e'
[ 1.058913] zswap: loaded using pool lzo/zbud
[ 1.064783] Key type big_key registered
[ 1.065116] Magic number: 15:305:662
[ 1.065145] platform PNP0C0A:01: hash matches
[ 1.065154] acpi PNP0C0A:01: hash matches
[ 1.065213] rtc_cmos 00:03: setting system clock to 2019-04-13T02:39:41 UTC (1555123181)
[ 1.067026] Freeing unused decrypted memory: 2040K
[ 1.067545] Freeing unused kernel image memory: 1536K
[ 1.088952] Write protecting the kernel read-only data: 18432k
[ 1.090118] Freeing unused kernel image memory: 2016K
[ 1.090478] Freeing unused kernel image memory: 376K
[ 1.103396] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.103398] x86/mm: Checking user space page tables
[ 1.110711] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.110713] Run /init as init process
[ 1.135200] Linux agpgart interface v0.103
[ 1.171392] VFIO - User Level meta-driver version: 0.3
[ 1.215512] Setting dangerous option enable_fbc - tainting kernel
[ 1.215516] i915: unknown parameter 'lvds_downclock' ignored
[ 1.215517] i915: unknown parameter 'enable_rc6' ignored
[ 1.215518] i915: unknown parameter 'semaphores' ignored
[ 1.216093] checking generic (a0000 10000) vs hw (d0000000 10000000)
[ 1.216094] fb0: switching to inteldrmfb from EFI VGA
[ 1.216110] Console: switching to colour dummy device 80x25
[ 1.216170] [drm] Replacing VGA console driver
[ 1.268122] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.268125] [drm] Driver supports precise vblank timestamp query.
[ 1.268871] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.324662] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0
[ 1.324946] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.345770] acpi device:0d: registered as cooling_device9
[ 1.345900] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.630848] fbcon: inteldrmfb (fb0) is primary device
[ 1.742594] Console: switching to colour frame buffer device 200x56
[ 1.766838] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.809842] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.809844] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.881294] [drm] amdgpu kernel modesetting enabled.
[ 1.881374] CRAT table not found
[ 1.881376] Virtual CRAT table created for CPU
[ 1.881376] Parsing CRAT table with 1 nodes
[ 1.881378] Creating topology SYSFS entries
[ 1.881389] Topology: Add CPU node
[ 1.881389] Finished initializing topology
[ 1.909354] [drm] radeon kernel modesetting enabled.
[ 1.960006] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.961629] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.961671] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.961702] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.963825] ehci-pci: EHCI PCI platform driver
[ 1.964026] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.964034] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.964047] ehci-pci 0000:00:1a.0: debug port 2
[ 1.966846] sdhci: Secure Digital Host Controller Interface driver
[ 1.966847] sdhci: Copyright(c) Pierre Ossman
[ 1.967950] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.967968] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe1636000
[ 1.970188] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 1.970244] SCSI subsystem initialized
[ 1.970544] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.971025] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 1.976683] random: fast init done
[ 1.977153] libata version 3.00 loaded.
[ 1.978819] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.978880] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[ 1.978882] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.978884] usb usb1: Product: EHCI Host Controller
[ 1.978886] usb usb1: Manufacturer: Linux 5.0.7-arch1-1-ARCH ehci_hcd
[ 1.978887] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.979015] hub 1-0:1.0: USB hub found
[ 1.979026] hub 1-0:1.0: 3 ports detected
[ 1.979178] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.979186] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.980186] ahci 0000:00:1f.2: version 3.0
[ 1.980252] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[ 1.980258] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.980259] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.980306] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.980402] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[ 1.980403] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.980404] usb usb2: Product: xHCI Host Controller
[ 1.980405] usb usb2: Manufacturer: Linux 5.0.7-arch1-1-ARCH xhci-hcd
[ 1.980406] usb usb2: SerialNumber: 0000:00:14.0
[ 1.980494] hub 2-0:1.0: USB hub found
[ 1.980507] hub 2-0:1.0: 4 ports detected
[ 1.980647] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.980652] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 1.980655] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.980658] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.980662] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.980663] ehci-pci 0000:00:1d.0: debug port 2
[ 1.980697] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[ 1.980698] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.980699] usb usb4: Product: xHCI Host Controller
[ 1.980700] usb usb4: Manufacturer: Linux 5.0.7-arch1-1-ARCH xhci-hcd
[ 1.980701] usb usb4: SerialNumber: 0000:00:14.0
[ 1.980771] hub 4-0:1.0: USB hub found
[ 1.980783] hub 4-0:1.0: 4 ports detected
[ 1.984551] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.984572] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe1637000
[ 1.990501] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[ 1.990505] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.991103] scsi host0: ahci
[ 1.991255] scsi host1: ahci
[ 1.991380] scsi host2: ahci
[ 1.991500] scsi host3: ahci
[ 1.991611] scsi host4: ahci
[ 1.991707] scsi host5: ahci
[ 1.991767] ata1: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635100 irq 31
[ 1.991770] ata2: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635180 irq 31
[ 1.991772] ata3: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635200 irq 31
[ 1.991773] ata4: DUMMY
[ 1.991776] ata5: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635300 irq 31
[ 1.991777] ata6: DUMMY
[ 1.995449] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.995527] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[ 1.995529] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.995531] usb usb3: Product: EHCI Host Controller
[ 1.995533] usb usb3: Manufacturer: Linux 5.0.7-arch1-1-ARCH ehci_hcd
[ 1.995534] usb usb3: SerialNumber: 0000:00:1d.0
[ 1.995655] hub 3-0:1.0: USB hub found
[ 1.995663] hub 3-0:1.0: 3 ports detected
[ 2.008780] tsc: Refined TSC clocksource calibration: 2693.880 MHz
[ 2.008786] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d4a90bb86, max_idle_ns: 440795202126 ns
[ 2.008799] clocksource: Switched to clocksource tsc
[ 2.305618] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.307465] ata1.00: supports DRM functions and may not be fully accessible
[ 2.307845] ata1.00: disabling queued TRIM support
[ 2.307846] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0DB6Q, max UDMA/133
[ 2.307848] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 2.308377] ata1.00: supports DRM functions and may not be fully accessible
[ 2.308751] ata1.00: disabling queued TRIM support
[ 2.308779] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.308794] usb 2-3: new high-speed USB device number 2 using xhci_hcd
[ 2.309139] ata1.00: configured for UDMA/133
[ 2.319343] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5
[ 2.325446] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 2.453509] usb 2-3: New USB device found, idVendor=0bb4, idProduct=03e0, bcdDevice= 0.05
[ 2.453515] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 2.453518] usb 2-3: Product: HTC Type-C to 3.5mm Headphone Jack
[ 2.453521] usb 2-3: Manufacturer: HTC
[ 2.453524] usb 2-3: SerialNumber: 5000000001
[ 2.455899] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.455905] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.456349] hub 1-1:1.0: USB hub found
[ 2.456531] hub 1-1:1.0: 6 ports detected
[ 2.461122] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.464349] usbcore: registered new interface driver usbhid
[ 2.464350] usbhid: USB HID core driver
[ 2.466346] input: HTC HTC Type-C to 3.5mm Headphone Jack as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:0BB4:03E0.0001/input/input6
[ 2.475865] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.475880] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.476250] hub 3-1:1.0: USB hub found
[ 2.476477] hub 3-1:1.0: 8 ports detected
[ 2.522470] hid-generic 0003:0BB4:03E0.0001: input,hidraw0: USB HID v1.00 Device [HTC HTC Type-C to 3.5mm Headphone Jack] on usb-0000:00:14.0-3/input0
[ 2.578883] usb 2-4: new high-speed USB device number 3 using xhci_hcd
[ 2.633189] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.634947] ata2.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
[ 2.634953] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.636975] ata2.00: configured for UDMA/133
[ 2.637717] scsi 1:0:0:0: Direct-Access ATA HGST HTS541010A9 A560 PQ: 0 ANSI: 5
[ 2.722176] usb 2-4: New USB device found, idVendor=413c, idProduct=818e, bcdDevice= 0.00
[ 2.722181] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.722184] usb 2-4: Product: DW5560
[ 2.722187] usb 2-4: Manufacturer: Dell
[ 2.722190] usb 2-4: SerialNumber: 4F06E142AECAC2M0
[ 2.735483] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 2.755485] usb 3-1.8: new high-speed USB device number 3 using ehci-pci
[ 2.839233] usb 1-1.1: New USB device found, idVendor=17ef, idProduct=1003, bcdDevice= 1.00
[ 2.839239] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.839242] usb 1-1.1: Product: Integrated Smart Card Reader
[ 2.839245] usb 1-1.1: Manufacturer: Lenovo
[ 2.853003] usb 3-1.8: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00
[ 2.853008] usb 3-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.853563] hub 3-1.8:1.0: USB hub found
[ 2.853718] hub 3-1.8:1.0: 6 ports detected
[ 2.912173] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[ 2.953084] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.012353] usb 1-1.2: New USB device found, idVendor=1050, idProduct=0116, bcdDevice= 3.50
[ 3.012359] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.012362] usb 1-1.2: Product: Yubikey NEO OTP+U2F+CCID
[ 3.012365] usb 1-1.2: Manufacturer: Yubico
[ 3.012368] usb 1-1.2: SerialNumber: 0007334776
[ 3.014314] input: Yubico Yubikey NEO OTP+U2F+CCID as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:1050:0116.0002/input/input7
[ 3.069113] hid-generic 0003:1050:0116.0002: input,hidraw1: USB HID v1.10 Keyboard [Yubico Yubikey NEO OTP+U2F+CCID] on usb-0000:00:1a.0-1.2/input0
[ 3.070743] hid-generic 0003:1050:0116.0003: hiddev0,hidraw2: USB HID v1.10 Device [Yubico Yubikey NEO OTP+U2F+CCID] on usb-0000:00:1a.0-1.2/input1
[ 3.132220] usb 3-1.8.3: new full-speed USB device number 4 using ehci-pci
[ 3.142218] usb 1-1.3: new full-speed USB device number 5 using ehci-pci
[ 3.230557] usb 3-1.8.3: New USB device found, idVendor=2516, idProduct=0020, bcdDevice= 1.22
[ 3.230563] usb 3-1.8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.230566] usb 3-1.8.3: Product: Quickfire Rapid i
[ 3.230569] usb 3-1.8.3: Manufacturer: CM Storm
[ 3.232457] input: CM Storm Quickfire Rapid i as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.3/3-1.8.3:1.0/0003:2516:0020.0004/input/input8
[ 3.240614] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01
[ 3.240619] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.240622] usb 1-1.3: Product: Biometric Coprocessor
[ 3.240625] usb 1-1.3: Manufacturer: Auth
[ 3.266261] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.278159] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 3.278164] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 3.278171] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 3.278203] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.278206] sd 0:0:0:0: [sda] Write Protect is off
[ 3.278208] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.278210] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.278249] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.278256] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.279570] sda: sda1 sda2 sda3 sda4
[ 3.280499] sd 0:0:0:0: [sda] supports TCG Opal
[ 3.280500] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.288981] hid-generic 0003:2516:0020.0004: input,hidraw3: USB HID v1.11 Keyboard [CM Storm Quickfire Rapid i] on usb-0000:00:1d.0-1.8.3/input0
[ 3.290432] hid-generic 0003:2516:0020.0005: hiddev1,hidraw4: USB HID v1.11 Device [CM Storm Quickfire Rapid i] on usb-0000:00:1d.0-1.8.3/input1
[ 3.291783] input: CM Storm Quickfire Rapid i System Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.3/3-1.8.3:1.2/0003:2516:0020.0006/input/input9
[ 3.312228] usb 1-1.5: new full-speed USB device number 6 using ehci-pci
[ 3.345699] input: CM Storm Quickfire Rapid i Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.3/3-1.8.3:1.2/0003:2516:0020.0006/input/input10
[ 3.345779] input: CM Storm Quickfire Rapid i Keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.3/3-1.8.3:1.2/0003:2516:0020.0006/input/input11
[ 3.345965] hid-generic 0003:2516:0020.0006: input,hidraw5: USB HID v1.11 Keyboard [CM Storm Quickfire Rapid i] on usb-0000:00:1d.0-1.8.3/input2
[ 3.411361] usb 1-1.5: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
[ 3.411366] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.418902] usb 3-1.8.4: new full-speed USB device number 5 using ehci-pci
[ 3.485551] usb 1-1.6: new high-speed USB device number 7 using ehci-pci
[ 3.522605] usb 3-1.8.4: New USB device found, idVendor=045e, idProduct=0719, bcdDevice= 1.00
[ 3.522611] usb 3-1.8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.522614] usb 3-1.8.4: Product: Xbox 360 Wireless Receiver for Windows
[ 3.522617] usb 3-1.8.4: Manufacturer: ©Microsoft
[ 3.522620] usb 3-1.8.4: SerialNumber: E01578E0
[ 3.578152] sdb: sdb1
[ 3.579564] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.589547] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2db, bcdDevice= 5.64
[ 3.589552] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.589555] usb 1-1.6: Product: Integrated Camera
[ 3.589558] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 3.612125] usb 3-1.8.6: new high-speed USB device number 6 using ehci-pci
[ 3.668792] raid6: sse2x4 gen() 14845 MB/s
[ 3.709152] usb 3-1.8.6: New USB device found, idVendor=0424, idProduct=2512, bcdDevice= b.b3
[ 3.709154] usb 3-1.8.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.709422] hub 3-1.8.6:1.0: USB hub found
[ 3.709496] hub 3-1.8.6:1.0: 2 ports detected
[ 3.725441] raid6: sse2x4 xor() 10420 MB/s
[ 3.782110] raid6: sse2x2 gen() 13195 MB/s
[ 3.838773] raid6: sse2x2 xor() 8785 MB/s
[ 3.895446] raid6: sse2x1 gen() 10982 MB/s
[ 3.952108] raid6: sse2x1 xor() 7873 MB/s
[ 3.952108] raid6: using algorithm sse2x4 gen() 14845 MB/s
[ 3.952109] raid6: .... xor() 10420 MB/s, rmw enabled
[ 3.952109] raid6: using ssse3x2 recovery algorithm
[ 3.953123] xor: automatically using best checksumming function avx
[ 3.984224] Btrfs loaded, crc32c=crc32c-intel
[ 3.985455] usb 3-1.8.2: new full-speed USB device number 7 using ehci-pci
[ 3.985659] BTRFS: device fsid 409c0333-c8b1-4428-889b-f838f6f3dd3c devid 1 transid 232365 /dev/sda4
[ 4.056568] BTRFS info (device sda4): disk space caching is enabled
[ 4.056570] BTRFS info (device sda4): has skinny extents
[ 4.078647] BTRFS info (device sda4): enabling ssd optimizations
[ 4.086400] usb 3-1.8.2: New USB device found, idVendor=1af3, idProduct=0001, bcdDevice= 0.01
[ 4.086404] usb 3-1.8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.086408] usb 3-1.8.2: Product: ZOWIE Gaming mouse
[ 4.086411] usb 3-1.8.2: Manufacturer: Kingsis Peripherals
[ 4.088433] input: Kingsis Peripherals ZOWIE Gaming mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.2/3-1.8.2:1.0/0003:1AF3:0001.0007/input/input12
[ 4.088588] hid-generic 0003:1AF3:0001.0007: input,hidraw6: USB HID v1.11 Mouse [Kingsis Peripherals ZOWIE Gaming mouse] on usb-0000:00:1d.0-1.8.2/input0
[ 4.241798] systemd[1]: systemd 241.93-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 4.255702] systemd[1]: Detected architecture x86-64.
[ 4.262216] systemd[1]: Set hostname to <Nozomi-4>.
[ 4.472495] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.472820] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.473135] systemd[1]: Listening on Journal Audit Socket.
[ 4.473302] systemd[1]: Reached target Remote File Systems.
[ 4.475131] systemd[1]: Created slice Virtual Machine and Container Slice.
[ 4.475354] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 4.476238] systemd[1]: Listening on LVM2 poll daemon socket.
[ 4.493090] random: lvm: uninitialized urandom read (4 bytes read)
[ 4.495899] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.495937] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.500750] i2c /dev entries driver
[ 4.536748] BTRFS info (device sda4): use zstd compression, level 0
[ 4.536750] BTRFS info (device sda4): disk space caching is enabled
[ 4.545195] random: systemd-random-: uninitialized urandom read (512 bytes read)
[ 4.684527] audit: type=1130 audit(1555123185.113:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.694458] systemd-journald[351]: Received request to flush runtime journal from PID 1
[ 4.835620] audit: type=1130 audit(1555123185.266:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.948773] audit: type=1130 audit(1555123185.376:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hwdb-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.152316] audit: type=1130 audit(1555123185.583:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.241541] audit: type=1130 audit(1555123185.670:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:intel_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.249019] audit: type=1130 audit(1555123185.680:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:acpi_video0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.263216] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 5.263217] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 5.263421] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 5.264975] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 5.265102] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 5.269477] ACPI: AC Adapter [AC] (on-line)
[ 5.270267] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 5.270282] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 5.270283] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 5.270284] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 5.277970] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 5.278120] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 5.278863] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20181213/utaddress-213)
[ 5.278869] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.278886] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213)
[ 5.278891] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.278893] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213)
[ 5.278897] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.278898] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213)
[ 5.278901] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.278902] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.279271] Non-volatile memory driver v1.3
[ 5.285502] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 5.291286] cryptd: max_cpu_qlen set to 1000
[ 5.295768] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 5.295769] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 5.295770] thinkpad_acpi: ThinkPad BIOS CBET4000 4.9-1306-gcef9879c3d, EC G1HT32WW-3.22
[ 5.295770] thinkpad_acpi: Lenovo ThinkPad T430, model 2347B85
[ 5.297222] thinkpad_acpi: radio switch found; radios are enabled
[ 5.297346] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 5.297361] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 5.297361] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 5.300178] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[ 5.302255] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 5.302803] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 5.305058] thinkpad_acpi: battery 1 registered (start 80, stop 85)
[ 5.305062] battery: new extension: ThinkPad Battery Extension
[ 5.305105] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input15
[ 5.330210] AVX version of gcm_enc/dec engaged.
[ 5.330211] AES CTR mode by8 optimization enabled
[ 5.333116] audit: type=1130 audit(1555123185.763:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.342432] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.345154] iTCO_vendor_support: vendor-support=0
[ 5.347816] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.347870] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 5.348121] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.350192] snd_hda_intel 0000:00:1b.0: Linked as a consumer to 0000:00:02.0
[ 5.352723] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.361031] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 5.376838] Intel(R) Wireless WiFi driver for Linux
[ 5.376839] Copyright(c) 2003- 2015 Intel Corporation
[ 5.385462] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3202: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 5.385464] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.385466] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 5.385468] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 5.385469] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 5.385471] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 5.385473] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 5.385474] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 5.388277] iwlwifi 0000:02:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm
[ 5.403017] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 5.403282] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 5.403318] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 5.403354] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 5.403387] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 5.403422] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ 5.403453] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[ 5.403493] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[ 5.410796] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 5.507754] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[ 5.517810] intel_rapl: Found RAPL domain package
[ 5.517812] intel_rapl: Found RAPL domain core
[ 5.517813] intel_rapl: Found RAPL domain uncore
[ 5.526586] iwlwifi 0000:02:00.0: base HW address: a0:a8:cd:96:e9:2a
[ 5.531228] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:12:10:56
[ 5.531233] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 5.531267] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 5.532978] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 5.754426] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 5.757069] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 5.870915] audit: type=1130 audit(1555123186.300:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.903440] fuse init (API version 7.28)
[ 5.922843] audit: type=1130 audit(1555123186.353:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-8341\x2d0397 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.975304] audit: type=1130 audit(1555123186.403:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.980019] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[ 5.984459] audit: type=1305 audit(1555123186.413:12): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 res=1
[ 5.992267] random: crng init done
[ 6.038742] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
[ 6.038747] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 6.076682] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
[ 6.080374] mousedev: PS/2 mouse device common for all mice
[ 6.334792] usbcore: registered new interface driver snd-usb-audio
[ 6.545771] cdc_wdm 2-4:1.5: cdc-wdm2: USB WDM device
[ 6.545845] cdc_wdm 2-4:1.8: cdc-wdm3: USB WDM device
[ 6.545890] usbcore: registered new interface driver cdc_wdm
[ 6.546427] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
[ 6.547462] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
[ 6.550200] usbcore: registered new interface driver cdc_ncm
[ 6.551533] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
[ 6.559351] usbcore: registered new interface driver cdc_acm
[ 6.559352] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 6.621277] cdc_mbim 2-4:1.6: cdc-wdm4: USB WDM device
[ 6.621457] cdc_mbim 2-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, c2:5d:e4:25:52:4b
[ 6.621555] usbcore: registered new interface driver cdc_mbim
[ 6.623459] cdc_mbim 2-4:1.6 wwp0s20u4i6: renamed from wwan0
[ 6.874122] media: Linux media interface: v0.10
[ 6.904498] videodev: Linux video capture interface: v2.00
[ 6.921959] Bluetooth: Core ver 2.22
[ 6.922496] NET: Registered protocol family 31
[ 6.922497] Bluetooth: HCI device and connection manager initialized
[ 6.922501] Bluetooth: HCI socket layer initialized
[ 6.922503] Bluetooth: L2CAP socket layer initialized
[ 6.922507] Bluetooth: SCO socket layer initialized
[ 6.999303] usbcore: registered new interface driver btusb
[ 7.012257] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 7.013008] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 7.016288] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2db)
[ 7.022487] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 7.022490] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 7.022491] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 7.022493] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 7.022562] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input25
[ 7.022632] usbcore: registered new interface driver uvcvideo
[ 7.022633] USB Video Class driver (1.1.1)
[ 7.232245] Bluetooth: hci0: Intel firmware patch completed and activated
[ 7.585845] loop: module loaded
[ 7.665768] usbcore: registered new interface driver xpad
[ 8.005658] Adding 524284k swap on /dev/loop0. Priority:-2 extents:1 across:524284k FS
[ 12.121507] input: Yubico Yubikey NEO OTP+U2F+CCID as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:1050:0116.0008/input/input26
[ 12.175818] hid-generic 0003:1050:0116.0008: input,hidraw1: USB HID v1.10 Keyboard [Yubico Yubikey NEO OTP+U2F+CCID] on usb-0000:00:1a.0-1.2/input0
[ 13.181392] wlp2s0: authenticate with 38:43:7d:c6:42:64
[ 13.184349] wlp2s0: send auth to 38:43:7d:c6:42:64 (try 1/3)
[ 13.205013] wlp2s0: authenticated
[ 13.205476] wlp2s0: associate with 38:43:7d:c6:42:64 (try 1/3)
[ 13.236823] wlp2s0: RX AssocResp from 38:43:7d:c6:42:64 (capab=0x511 status=0 aid=1)
[ 13.246618] wlp2s0: associated
[ 13.287408] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 15.898375] rfkill: input handler disabled
[ 120.083258] input: Yubico Yubikey NEO OTP+U2F+CCID as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:1050:0116.0009/input/input27
[ 120.139727] hid-generic 0003:1050:0116.0009: input,hidraw1: USB HID v1.10 Keyboard [Yubico Yubikey NEO OTP+U2F+CCID] on usb-0000:00:1a.0-1.2/input0