blob: 4a3350b71cd78c8fdd3e30085f81996997b65c4f [file] [log] [blame]
[ 0.000000] Linux version 5.9.6-arch1-1 (linux@archlinux) (gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35.1) #1 SMP PREEMPT Thu, 05 Nov 2020 21:00:46 +0000
[ 0.000000] Command line: root=LABEL=Archlinux rw initrd=\intel-ucode.img initrd=\initramfs-linux.img iomem=relaxed mitigations=off intel_iommu=on
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007faadfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007faae000-0x000000007fbf1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007fbf2000-0x000000007fbfcfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fbfd000-0x000000007fbfdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007fbfe000-0x000000007ff2dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff2e000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027d5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.70 by EDK II
[ 0.000000] efi: ACPI 2.0=0x7ff40000 SMBIOS=0x7ff2e000
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: LENOVO 2347B85/2347B85, BIOS CBET4000 4.12-3954-gd00af4fbac-dirty 11/11/2020
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2693.785 MHz processor
[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000013] last_pfn = 0x27d600 max_arch_pfn = 0x400000000
[ 0.000017] MTRR default type: uncachable
[ 0.000018] MTRR fixed ranges enabled:
[ 0.000019] 00000-9FFFF write-back
[ 0.000020] A0000-BFFFF uncachable
[ 0.000021] C0000-FFFFF write-back
[ 0.000022] MTRR variable ranges enabled:
[ 0.000023] 0 base 000000000 mask F80000000 write-back
[ 0.000024] 1 base 090000000 mask FF0000000 write-combining
[ 0.000025] 2 base 100000000 mask F00000000 write-back
[ 0.000026] 3 base 200000000 mask F80000000 write-back
[ 0.000026] 4 disabled
[ 0.000027] 5 disabled
[ 0.000027] 6 disabled
[ 0.000028] 7 disabled
[ 0.000028] 8 disabled
[ 0.000029] 9 disabled
[ 0.000408] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000606] last_pfn = 0x7ff2e max_arch_pfn = 0x400000000
[ 0.011997] check: Scanning 1 areas for low memory corruption
[ 0.012001] Kernel/User page tables isolation: disabled on command line.
[ 0.012364] Secure boot disabled
[ 0.012366] RAMDISK: [mem 0x7d303000-0x7e31bfff]
[ 0.012371] ACPI: Early table checksum verification disabled
[ 0.012374] ACPI: RSDP 0x000000007FF40000 000024 (v02 COREv4)
[ 0.012378] ACPI: XSDT 0x000000007FBFDF18 000064 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012384] ACPI: FACP 0x000000007FF43BB0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012389] ACPI: DSDT 0x000000007FF40280 003921 (v02 COREv4 COREBOOT 20141018 INTL 20190703)
[ 0.012392] ACPI: FACS 0x000000007FF40240 000040
[ 0.012395] ACPI: FACS 0x000000007FF40240 000040
[ 0.012397] ACPI: SSDT 0x000000007FF43CD0 002FB7 (v02 COREv4 COREBOOT 0000002A CORE 20190703)
[ 0.012400] ACPI: MCFG 0x000000007FF46C90 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012403] ACPI: TCPA 0x000000007FF46CD0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012406] ACPI: APIC 0x000000007FF46D10 00008C (v03 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012409] ACPI: DMAR 0x000000007FF46DA0 0000C0 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012411] ACPI: HPET 0x000000007FF46E60 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012414] ACPI: BGRT 0x000000007FBFD018 000038 (v00 INTEL EDK2 00001720 PTL 00000002)
[ 0.012422] ACPI: Local APIC address 0xfee00000
[ 0.012468] No NUMA configuration found
[ 0.012469] Faking a node at [mem 0x0000000000000000-0x000000027d5fffff]
[ 0.012472] NODE_DATA(0) allocated [mem 0x27d5fa000-0x27d5fdfff]
[ 0.012500] Zone ranges:
[ 0.012501] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.012502] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.012503] Normal [mem 0x0000000100000000-0x000000027d5fffff]
[ 0.012503] Device empty
[ 0.012504] Movable zone start for each node
[ 0.012505] Early memory node ranges
[ 0.012506] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.012506] node 0: [mem 0x0000000000100000-0x000000007faadfff]
[ 0.012507] node 0: [mem 0x000000007fbf2000-0x000000007fbfcfff]
[ 0.012508] node 0: [mem 0x000000007fbfe000-0x000000007ff2dfff]
[ 0.012509] node 0: [mem 0x0000000100000000-0x000000027d5fffff]
[ 0.012627] Zeroed struct page in unavailable ranges: 11384 pages
[ 0.012628] Initmem setup node 0 [mem 0x0000000000001000-0x000000027d5fffff]
[ 0.012629] On node 0 totalpages: 2085768
[ 0.012630] DMA zone: 64 pages used for memmap
[ 0.012631] DMA zone: 1062 pages reserved
[ 0.012632] DMA zone: 3999 pages, LIFO batch:0
[ 0.012658] DMA32 zone: 8120 pages used for memmap
[ 0.012659] DMA32 zone: 519657 pages, LIFO batch:63
[ 0.016245] Normal zone: 24408 pages used for memmap
[ 0.016247] Normal zone: 1562112 pages, LIFO batch:63
[ 0.027211] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
[ 0.027418] ACPI: PM-Timer IO Port: 0x508
[ 0.027420] ACPI: Local APIC address 0xfee00000
[ 0.027438] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.027440] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.027441] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.027443] ACPI: IRQ0 used by override.
[ 0.027444] ACPI: IRQ9 used by override.
[ 0.027446] Using ACPI (MADT) for SMP configuration information
[ 0.027447] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.027457] e820: update [mem 0x7f662000-0x7f67ffff] usable ==> reserved
[ 0.027463] TSC deadline timer available
[ 0.027464] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.027475] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.027476] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.027478] PM: hibernation: Registered nosave memory: [mem 0x7f662000-0x7f67ffff]
[ 0.027479] PM: hibernation: Registered nosave memory: [mem 0x7faae000-0x7fbf1fff]
[ 0.027480] PM: hibernation: Registered nosave memory: [mem 0x7fbfd000-0x7fbfdfff]
[ 0.027481] PM: hibernation: Registered nosave memory: [mem 0x7ff2e000-0x7fffffff]
[ 0.027482] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x809fffff]
[ 0.027483] PM: hibernation: Registered nosave memory: [mem 0x80a00000-0x829fffff]
[ 0.027483] PM: hibernation: Registered nosave memory: [mem 0x82a00000-0xffffffff]
[ 0.027485] [mem 0x82a00000-0xffffffff] available for PCI devices
[ 0.027486] Booting paravirtualized kernel on bare hardware
[ 0.027489] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.032304] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.032502] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
[ 0.032507] pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
[ 0.032508] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.032527] Built 1 zonelists, mobility grouping on. Total pages: 2052114
[ 0.032528] Policy zone: Normal
[ 0.032529] Kernel command line: root=LABEL=Archlinux rw initrd=\intel-ucode.img initrd=\initramfs-linux.img iomem=relaxed mitigations=off intel_iommu=on
[ 0.032599] DMAR: IOMMU enabled
[ 0.033026] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.033234] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.033317] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[ 0.057148] Memory: 8052832K/8343072K available (14339K kernel code, 1525K rwdata, 7928K rodata, 1656K init, 2928K bss, 289980K reserved, 0K cma-reserved)
[ 0.057155] random: get_random_u64 called from __kmem_cache_create+0x26/0x520 with crng_init=0
[ 0.057275] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.057287] ftrace: allocating 40883 entries in 160 pages
[ 0.071860] ftrace: allocated 160 pages with 2 groups
[ 0.071972] rcu: Preemptible hierarchical RCU implementation.
[ 0.071973] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.071974] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.071974] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.071975] Trampoline variant of Tasks RCU enabled.
[ 0.071975] Rude variant of Tasks RCU enabled.
[ 0.071976] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.071977] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.075230] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[ 0.075478] Console: colour dummy device 80x25
[ 0.075482] printk: console [tty0] enabled
[ 0.075498] ACPI: Core revision 20200717
[ 0.075571] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.075600] APIC: Switch to symmetric I/O mode setup
[ 0.075601] DMAR: Host address width 36
[ 0.075602] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.075607] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.075607] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.075610] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.075611] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff
[ 0.075612] DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR [0x0000000080800000-0x00000000829fffff], contact BIOS vendor for fixes
[ 0.075617] DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR [0x0000000080800000-0x00000000829fffff]
BIOS vendor: coreboot; Ver: CBET4000 4.12-3954-gd00af4fbac-dirty; Product Version: ThinkPad T430
[ 0.075619] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.075620] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.075621] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.076031] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.076032] x2apic enabled
[ 0.076038] Switched APIC routing to cluster x2apic.
[ 0.076472] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.092254] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d44f3a38d, max_idle_ns: 440795230783 ns
[ 0.092258] Calibrating delay loop (skipped), value calculated using timer frequency.. 5389.05 BogoMIPS (lpj=8979283)
[ 0.092260] pid_max: default: 32768 minimum: 301
[ 0.093510] LSM: Security Framework initializing
[ 0.093514] Yama: becoming mindful.
[ 0.093545] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.093559] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.093814] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.093827] process: using mwait in idle threads
[ 0.093829] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.093830] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.093833] Speculative Store Bypass: Vulnerable
[ 0.093834] SRBDS: Vulnerable: No microcode
[ 0.094031] Freeing SMP alternatives memory: 32K
[ 0.094949] smpboot: CPU0: Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.095055] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.095062] ... version: 3
[ 0.095062] ... bit width: 48
[ 0.095063] ... generic registers: 4
[ 0.095063] ... value mask: 0000ffffffffffff
[ 0.095064] ... max period: 00007fffffffffff
[ 0.095064] ... fixed-purpose events: 3
[ 0.095065] ... event mask: 000000070000000f
[ 0.095104] rcu: Hierarchical SRCU implementation.
[ 0.095589] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.095589] smp: Bringing up secondary CPUs ...
[ 0.095589] x86: Booting SMP configuration:
[ 0.095589] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.114297] smp: Brought up 1 node, 8 CPUs
[ 0.114297] smpboot: Max logical packages: 1
[ 0.114297] smpboot: Total of 8 processors activated (43117.41 BogoMIPS)
[ 0.115967] devtmpfs: initialized
[ 0.115967] x86/mm: Memory block size: 128MB
[ 0.116285] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.116285] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.116285] pinctrl core: initialized pinctrl subsystem
[ 0.116285] PM: RTC time: 12:11:34, date: 2020-11-11
[ 0.116285] NET: Registered protocol family 16
[ 0.116285] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.116285] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.116285] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.116285] audit: initializing netlink subsys (disabled)
[ 0.116285] audit: type=2000 audit(1605096694.043:1): state=initialized audit_enabled=0 res=1
[ 0.116285] thermal_sys: Registered thermal governor 'fair_share'
[ 0.116285] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.116285] thermal_sys: Registered thermal governor 'step_wise'
[ 0.116285] thermal_sys: Registered thermal governor 'user_space'
[ 0.116285] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.116285] cpuidle: using governor ladder
[ 0.116285] cpuidle: using governor menu
[ 0.116285] ACPI: bus type PCI registered
[ 0.116285] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.116285] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.116285] PCI: not using MMCONFIG
[ 0.116285] PCI: Using configuration type 1 for base access
[ 0.116285] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.119354] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.119354] fbcon: Taking over console
[ 0.119354] ACPI: Added _OSI(Module Device)
[ 0.119354] ACPI: Added _OSI(Processor Device)
[ 0.119354] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.119354] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.119354] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.119354] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.119354] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.125089] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.126194] ACPI: EC: EC started
[ 0.126195] ACPI: EC: interrupt blocked
[ 0.126495] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.126497] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[ 0.126498] ACPI: Interpreter enabled
[ 0.126516] ACPI: (supports S0 S3 S4 S5)
[ 0.126516] ACPI: Using IOAPIC for interrupt routing
[ 0.126536] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.126860] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.126869] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.127056] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.131793] ACPI: Power Resource [FPWR] (off)
[ 0.132147] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.132152] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.132219] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.132230] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.132542] PCI host bridge to bus 0000:00
[ 0.132544] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.132546] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.132547] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.132548] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.132549] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.132550] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.132551] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.132552] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.132553] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.132554] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.132555] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.132556] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.132557] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.132558] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.132559] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.132560] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.132561] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
[ 0.132562] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.132563] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.132576] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.132688] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.132697] pci 0000:00:02.0: reg 0x10: [mem 0x83c00000-0x83ffffff 64bit]
[ 0.132703] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.132707] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
[ 0.132719] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.132828] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.132847] pci 0000:00:14.0: reg 0x10: [mem 0x84020000-0x8402ffff 64bit]
[ 0.132916] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.133060] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.133140] pci 0000:00:16.0: reg 0x10: [mem 0x84039000-0x8403900f 64bit]
[ 0.133464] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.133605] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.133619] pci 0000:00:19.0: reg 0x10: [mem 0x84000000-0x8401ffff]
[ 0.133627] pci 0000:00:19.0: reg 0x14: [mem 0x84034000-0x84034fff]
[ 0.133635] pci 0000:00:19.0: reg 0x18: [io 0x1040-0x105f]
[ 0.133694] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.133784] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.133799] pci 0000:00:1a.0: reg 0x10: [mem 0x84036000-0x840363ff]
[ 0.133882] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.133985] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.134002] pci 0000:00:1b.0: reg 0x10: [mem 0x84030000-0x84033fff 64bit]
[ 0.134079] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.134192] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.134340] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.134480] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.134628] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.134769] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.134954] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.135055] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.135071] pci 0000:00:1d.0: reg 0x10: [mem 0x84037000-0x840373ff]
[ 0.135153] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.135254] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.135447] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.135459] pci 0000:00:1f.2: reg 0x10: [io 0x1080-0x1087]
[ 0.135467] pci 0000:00:1f.2: reg 0x14: [io 0x1090-0x1093]
[ 0.135474] pci 0000:00:1f.2: reg 0x18: [io 0x1088-0x108f]
[ 0.135482] pci 0000:00:1f.2: reg 0x1c: [io 0x1094-0x1097]
[ 0.135489] pci 0000:00:1f.2: reg 0x20: [io 0x1060-0x107f]
[ 0.135497] pci 0000:00:1f.2: reg 0x24: [mem 0x84035000-0x840357ff]
[ 0.135537] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.135635] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.135652] pci 0000:00:1f.3: reg 0x10: [mem 0x84038000-0x840380ff 64bit]
[ 0.135672] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.135902] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.135909] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[ 0.135957] pci 0000:01:00.0: reg 0x10: [mem 0x82a00000-0x82a000ff]
[ 0.136273] pci 0000:01:00.0: supports D1 D2
[ 0.136274] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.136498] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.136505] pci 0000:00:1c.0: bridge window [mem 0x82a00000-0x82afffff]
[ 0.136678] pci 0000:02:00.0: [8086:08b2] type 00 class 0x028000
[ 0.136743] pci 0000:02:00.0: reg 0x10: [mem 0x82b00000-0x82b01fff 64bit]
[ 0.137108] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.137436] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.137444] pci 0000:00:1c.1: bridge window [mem 0x82b00000-0x82bfffff]
[ 0.137531] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.137536] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.137541] pci 0000:00:1c.2: bridge window [mem 0x83400000-0x83bfffff]
[ 0.137549] pci 0000:00:1c.2: bridge window [mem 0x82c00000-0x833fffff 64bit pref]
[ 0.137794] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.137865] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.137932] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.137997] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.138061] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.138126] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.138191] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.138256] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.139064] ACPI: EC: interrupt unblocked
[ 0.139065] ACPI: EC: event unblocked
[ 0.139071] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.139071] ACPI: EC: GPE=0x11
[ 0.139073] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete
[ 0.139074] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[ 0.139143] iommu: Default domain type: Translated
[ 0.139155] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.139155] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.139155] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.139155] vgaarb: loaded
[ 0.139155] SCSI subsystem initialized
[ 0.139155] libata version 3.00 loaded.
[ 0.139155] ACPI: bus type USB registered
[ 0.139155] usbcore: registered new interface driver usbfs
[ 0.139155] usbcore: registered new interface driver hub
[ 0.139155] usbcore: registered new device driver usb
[ 0.139155] pps_core: LinuxPPS API ver. 1 registered
[ 0.139155] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.139155] PTP clock support registered
[ 0.139155] EDAC MC: Ver: 3.0.0
[ 0.139155] Registered efivars operations
[ 0.139155] NetLabel: Initializing
[ 0.139155] NetLabel: domain hash size = 128
[ 0.139155] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.139155] NetLabel: unlabeled traffic allowed by default
[ 0.139155] PCI: Using ACPI for IRQ routing
[ 0.140530] PCI: pci_cache_line_size set to 64 bytes
[ 0.140622] e820: reserve RAM buffer [mem 0x7f662000-0x7fffffff]
[ 0.140623] e820: reserve RAM buffer [mem 0x7faae000-0x7fffffff]
[ 0.140624] e820: reserve RAM buffer [mem 0x7fbfd000-0x7fffffff]
[ 0.140625] e820: reserve RAM buffer [mem 0x7ff2e000-0x7fffffff]
[ 0.140626] e820: reserve RAM buffer [mem 0x27d600000-0x27fffffff]
[ 0.140630] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.140630] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.143307] clocksource: Switched to clocksource tsc-early
[ 0.154046] VFS: Disk quotas dquot_6.6.0
[ 0.154061] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.154132] pnp: PnP ACPI init
[ 0.154386] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.154388] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.154389] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.154390] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.154391] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.154392] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.154394] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.154395] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.154396] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.154398] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.154403] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.154922] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.154926] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.154963] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.154964] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.154968] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.154987] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.155017] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.155043] pnp 00:05: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.155069] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.155094] pnp: PnP ACPI: found 7 devices
[ 0.160835] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.160892] NET: Registered protocol family 2
[ 0.161037] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.161076] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.161214] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.161290] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.161341] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.161383] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.161405] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.161483] NET: Registered protocol family 1
[ 0.161487] NET: Registered protocol family 44
[ 0.161498] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.161505] pci 0000:00:1c.0: bridge window [mem 0x82a00000-0x82afffff]
[ 0.161517] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.161523] pci 0000:00:1c.1: bridge window [mem 0x82b00000-0x82bfffff]
[ 0.161534] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.161537] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.161543] pci 0000:00:1c.2: bridge window [mem 0x83400000-0x83bfffff]
[ 0.161548] pci 0000:00:1c.2: bridge window [mem 0x82c00000-0x833fffff 64bit pref]
[ 0.161557] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.161558] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.161559] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.161560] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.161561] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.161562] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.161563] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.161564] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.161565] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.161566] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.161567] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.161568] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.161570] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.161571] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.161572] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.161573] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.161574] pci_bus 0000:00: resource 20 [mem 0x82a00000-0xefffffff window]
[ 0.161575] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.161576] pci_bus 0000:01: resource 1 [mem 0x82a00000-0x82afffff]
[ 0.161577] pci_bus 0000:02: resource 1 [mem 0x82b00000-0x82bfffff]
[ 0.161579] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.161580] pci_bus 0000:03: resource 1 [mem 0x83400000-0x83bfffff]
[ 0.161581] pci_bus 0000:03: resource 2 [mem 0x82c00000-0x833fffff 64bit pref]
[ 0.161654] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.162330] PCI: CLS 64 bytes, default 64
[ 0.162367] Trying to unpack rootfs image as initramfs...
[ 0.345986] Freeing initrd memory: 16484K
[ 0.346016] DMAR: No ATSR found
[ 0.346057] DMAR: dmar0: Using Queued invalidation
[ 0.346065] DMAR: dmar1: Using Queued invalidation
[ 0.385360] pci 0000:00:00.0: Adding to iommu group 0
[ 0.385370] pci 0000:00:02.0: Adding to iommu group 1
[ 0.385378] pci 0000:00:14.0: Adding to iommu group 2
[ 0.385389] pci 0000:00:16.0: Adding to iommu group 3
[ 0.385396] pci 0000:00:19.0: Adding to iommu group 4
[ 0.385404] pci 0000:00:1a.0: Adding to iommu group 5
[ 0.385412] pci 0000:00:1b.0: Adding to iommu group 6
[ 0.385427] pci 0000:00:1c.0: Adding to iommu group 7
[ 0.385434] pci 0000:00:1c.1: Adding to iommu group 7
[ 0.385442] pci 0000:00:1c.2: Adding to iommu group 7
[ 0.385450] pci 0000:00:1d.0: Adding to iommu group 8
[ 0.385465] pci 0000:00:1f.0: Adding to iommu group 9
[ 0.385472] pci 0000:00:1f.2: Adding to iommu group 9
[ 0.385480] pci 0000:00:1f.3: Adding to iommu group 9
[ 0.385484] pci 0000:01:00.0: Adding to iommu group 7
[ 0.385488] pci 0000:02:00.0: Adding to iommu group 7
[ 0.390274] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.390275] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.390276] software IO TLB: mapped [mem 0x77f20000-0x7bf20000] (64MB)
[ 0.390436] check: Scanning for low memory corruption every 60 seconds
[ 0.390761] Initialise system trusted keyrings
[ 0.390772] Key type blacklist registered
[ 0.390815] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.391898] zbud: loaded
[ 0.402632] Key type asymmetric registered
[ 0.402633] Asymmetric key parser 'x509' registered
[ 0.402640] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.402680] io scheduler mq-deadline registered
[ 0.402681] io scheduler kyber registered
[ 0.402700] io scheduler bfq registered
[ 0.403079] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26
[ 0.403330] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27
[ 0.403573] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28
[ 0.403602] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.403740] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.403807] efifb: probing for efifb
[ 0.403821] efifb: framebuffer at 0x90000000, using 5628k, total 5625k
[ 0.403822] efifb: mode is 1600x900x32, linelength=6400, pages=1
[ 0.403822] efifb: scrolling: redraw
[ 0.403824] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.403906] Console: switching to colour frame buffer device 200x56
[ 0.406703] fb0: EFI VGA frame buffer device
[ 0.406711] intel_idle: MWAIT substates: 0x21120
[ 0.406712] intel_idle: v0.5.1 model 0x3A
[ 0.407059] intel_idle: Local APIC timer is reliable in all C-states
[ 0.407115] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input0
[ 0.408970] ACPI: Sleep Button [SLPB]
[ 0.409022] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input1
[ 0.412304] ACPI: Lid Switch [LID]
[ 0.412358] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.415625] ACPI: Power Button [PWRF]
[ 0.418862] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.418863] ACPI: Thermal Zone [THM0] (60 C)
[ 0.419784] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.419785] ACPI: Thermal Zone [THM1] (27 C)
[ 0.419978] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.420538] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.420538] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.421224] ahci 0000:00:1f.2: version 3.0
[ 0.421387] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.421415] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[ 0.421417] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 0.421983] scsi host0: ahci
[ 0.422141] scsi host1: ahci
[ 0.422223] scsi host2: ahci
[ 0.422330] scsi host3: ahci
[ 0.422417] scsi host4: ahci
[ 0.422495] scsi host5: ahci
[ 0.422529] ata1: SATA max UDMA/133 abar m2048@0x84035000 port 0x84035100 irq 29
[ 0.422532] ata2: SATA max UDMA/133 abar m2048@0x84035000 port 0x84035180 irq 29
[ 0.422534] ata3: SATA max UDMA/133 abar m2048@0x84035000 port 0x84035200 irq 29
[ 0.422535] ata4: DUMMY
[ 0.422537] ata5: SATA max UDMA/133 abar m2048@0x84035000 port 0x84035300 irq 29
[ 0.422538] ata6: DUMMY
[ 0.422577] usbcore: registered new interface driver usbserial_generic
[ 0.422580] usbserial: USB Serial support registered for generic
[ 0.422600] rtc_cmos 00:03: RTC can wake from S4
[ 0.422780] rtc_cmos 00:03: registered as rtc0
[ 0.422808] rtc_cmos 00:03: setting system clock to 2020-11-11T12:11:34 UTC (1605096694)
[ 0.422825] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.422873] intel_pstate: Intel P-state driver initializing
[ 0.423377] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.423488] drop_monitor: Initializing network drop monitor service
[ 0.423603] NET: Registered protocol family 10
[ 0.427289] Segment Routing with IPv6
[ 0.427290] RPL Segment Routing with IPv6
[ 0.427305] NET: Registered protocol family 17
[ 0.427678] microcode: sig=0x306a9, pf=0x10, revision=0x21
[ 0.427718] microcode: Microcode Update Driver: v2.2.
[ 0.427721] IPI shorthand broadcast: enabled
[ 0.427726] sched_clock: Marking stable (430890540, -3175454)->(434572713, -6857627)
[ 0.427828] registered taskstats version 1
[ 0.427834] Loading compiled-in X.509 certificates
[ 0.430018] Loaded X.509 cert 'Build time autogenerated kernel key: 0a973c6dc88025e3c9b49d52a86cf41c85f5b0a1'
[ 0.430159] zswap: loaded using pool lz4/z3fold
[ 0.430310] Key type ._fscrypt registered
[ 0.430310] Key type .fscrypt registered
[ 0.430311] Key type fscrypt-provisioning registered
[ 0.430566] PM: Magic number: 12:744:177
[ 0.430607] acpi device:0d: hash matches
[ 0.430673] RAS: Correctable Errors collector initialized.
[ 0.738970] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.739340] ata1.00: supports DRM functions and may not be fully accessible
[ 0.740031] ata1.00: disabling queued TRIM support
[ 0.740035] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0DB6Q, max UDMA/133
[ 0.740038] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 0.740987] ata1.00: supports DRM functions and may not be fully accessible
[ 0.741574] ata1.00: disabling queued TRIM support
[ 0.742151] ata1.00: configured for UDMA/133
[ 0.752546] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5
[ 0.752806] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 0.752814] sd 0:0:0:0: [sda] Write Protect is off
[ 0.752815] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.752825] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.755051] sda: sda3 sda4
[ 0.755898] sd 0:0:0:0: [sda] supports TCG Opal
[ 0.755903] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.068970] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.107277] ata2.00: ATA-8: TOSHIBA MQ01ACF032, AV001D, max UDMA/100
[ 1.107281] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.109129] ata2.00: configured for UDMA/100
[ 1.109659] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MQ01ACF0 1D PQ: 0 ANSI: 5
[ 1.109870] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.109871] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.109879] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.109881] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.109891] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.208478] sdb: sdb1
[ 1.209130] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.405636] tsc: Refined TSC clocksource calibration: 2693.878 MHz
[ 1.405649] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d4a734869, max_idle_ns: 440795280935 ns
[ 1.405703] clocksource: Switched to clocksource tsc
[ 1.425617] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.738956] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.742662] Freeing unused decrypted memory: 2040K
[ 1.743259] Freeing unused kernel image (initmem) memory: 1656K
[ 1.743262] Write protecting the kernel read-only data: 24576k
[ 1.744367] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 1.744590] Freeing unused kernel image (rodata/data gap) memory: 264K
[ 1.780572] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.780582] Run /init as init process
[ 1.780584] with arguments:
[ 1.780586] /init
[ 1.780587] with environment:
[ 1.780588] HOME=/
[ 1.780589] TERM=linux
[ 1.780591] intel_iommu=on
[ 1.804536] Linux agpgart interface v0.103
[ 1.858437] Setting dangerous option enable_fbc - tainting kernel
[ 1.859012] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 1.859014] checking generic (90000000 57f000) vs hw (83c00000 400000)
[ 1.859015] checking generic (90000000 57f000) vs hw (90000000 10000000)
[ 1.859015] fb0: switching to inteldrmfb from EFI VGA
[ 1.859089] Console: switching to colour dummy device 80x25
[ 1.859115] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.859145] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory
[ 1.912588] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.962810] [drm] Initialized i915 1.6.0 20200715 for 0000:00:02.0 on minor 0
[ 1.962983] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.982516] acpi device:0d: registered as cooling_device9
[ 1.982566] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 2.199954] fbcon: i915drmfb (fb0) is primary device
[ 2.374140] i915 0000:00:02.0: [drm] *ERROR* fifo underrun on pipe A
[ 2.374143] i915 0000:00:02.0: [drm] *ERROR* fifo underrun on pipe B
[ 2.374149] i915 0000:00:02.0: [drm] *ERROR* pch fifo underrun on pch transcoder A
[ 2.374154] i915 0000:00:02.0: [drm] *ERROR* pch fifo underrun on pch transcoder B
[ 2.374183] Console: switching to colour frame buffer device 200x56
[ 2.394927] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 2.476247] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.477919] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.477966] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.479222] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.480024] ehci-pci: EHCI PCI platform driver
[ 2.480183] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.480188] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.480200] ehci-pci 0000:00:1a.0: debug port 2
[ 2.484106] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.484126] ehci-pci 0000:00:1a.0: irq 19, io mem 0x84036000
[ 2.484297] sdhci: Secure Digital Host Controller Interface driver
[ 2.484298] sdhci: Copyright(c) Pierre Ossman
[ 2.487491] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 2.487901] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 2.488045] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 2.495918] random: fast init done
[ 2.497008] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.498948] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.498989] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[ 2.498990] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.498991] usb usb1: Product: EHCI Host Controller
[ 2.498992] usb usb1: Manufacturer: Linux 5.9.6-arch1-1 ehci_hcd
[ 2.498993] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.499122] hub 1-0:1.0: USB hub found
[ 2.499127] hub 1-0:1.0: 3 ports detected
[ 2.499228] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.499236] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.500341] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[ 2.500346] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.500486] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[ 2.500487] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.500488] usb usb2: Product: xHCI Host Controller
[ 2.500489] usb usb2: Manufacturer: Linux 5.9.6-arch1-1 xhci-hcd
[ 2.500489] usb usb2: SerialNumber: 0000:00:14.0
[ 2.500620] hub 2-0:1.0: USB hub found
[ 2.500634] hub 2-0:1.0: 4 ports detected
[ 2.500777] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.500783] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 2.500802] ehci-pci 0000:00:1d.0: debug port 2
[ 2.500824] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.500829] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 2.500836] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 2.501181] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.09
[ 2.501182] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.501182] usb usb4: Product: xHCI Host Controller
[ 2.501183] usb usb4: Manufacturer: Linux 5.9.6-arch1-1 xhci-hcd
[ 2.501184] usb usb4: SerialNumber: 0000:00:14.0
[ 2.501268] hub 4-0:1.0: USB hub found
[ 2.501286] hub 4-0:1.0: 4 ports detected
[ 2.504733] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.504749] ehci-pci 0000:00:1d.0: irq 18, io mem 0x84037000
[ 2.515638] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.515683] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[ 2.515685] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.515686] usb usb3: Product: EHCI Host Controller
[ 2.515687] usb usb3: Manufacturer: Linux 5.9.6-arch1-1 ehci_hcd
[ 2.515688] usb usb3: SerialNumber: 0000:00:1d.0
[ 2.515840] hub 3-0:1.0: USB hub found
[ 2.515846] hub 3-0:1.0: 3 ports detected
[ 2.558933] raid6: sse2x4 gen() 17129 MB/s
[ 2.615603] raid6: sse2x4 xor() 8265 MB/s
[ 2.672272] raid6: sse2x2 gen() 17493 MB/s
[ 2.728925] raid6: sse2x2 xor() 9690 MB/s
[ 2.785597] raid6: sse2x1 gen() 14294 MB/s
[ 2.842259] raid6: sse2x1 xor() 7836 MB/s
[ 2.842259] raid6: using algorithm sse2x2 gen() 17493 MB/s
[ 2.842260] raid6: .... xor() 9690 MB/s, rmw enabled
[ 2.842261] raid6: using ssse3x2 recovery algorithm
[ 2.842268] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.843218] xor: automatically using best checksumming function avx
[ 2.845598] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 2.868915] Btrfs loaded, crc32c=crc32c-intel
[ 2.870302] BTRFS: device label Archlinux devid 1 transid 2359733 /dev/sda4 scanned by systemd-udevd (194)
[ 2.930130] BTRFS info (device sda4): disk space caching is enabled
[ 2.930132] BTRFS info (device sda4): has skinny extents
[ 2.956868] BTRFS info (device sda4): enabling ssd optimizations
[ 2.989339] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.989342] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.989741] hub 1-1:1.0: USB hub found
[ 2.989845] hub 1-1:1.0: 6 ports detected
[ 2.992686] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.992690] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.992970] hub 3-1:1.0: USB hub found
[ 2.993053] hub 3-1:1.0: 8 ports detected
[ 3.141039] systemd[1]: systemd 246.6-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 3.155796] systemd[1]: Detected architecture x86-64.
[ 3.182339] systemd[1]: Set hostname to <Nozomi-4>.
[ 3.272274] usb 3-1.8: new high-speed USB device number 3 using ehci-pci
[ 3.272292] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 3.362125] systemd[1]: /etc/systemd/system/libvirtd.socket.d/override.conf:1: Assignment outside of section. Ignoring.
[ 3.369313] usb 3-1.8: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00
[ 3.369314] usb 3-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.369592] hub 3-1.8:1.0: USB hub found
[ 3.369706] hub 3-1.8:1.0: 7 ports detected
[ 3.370640] systemd[1]: Queued start job for default target Graphical Interface.
[ 3.371339] systemd[1]: Created slice Virtual Machine and Container Slice.
[ 3.371836] systemd[1]: Created slice system-getty.slice.
[ 3.372082] systemd[1]: Created slice system-modprobe.slice.
[ 3.372407] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.372639] systemd[1]: Created slice User and Session Slice.
[ 3.372770] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.372895] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.373102] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.373229] systemd[1]: Reached target Local Encrypted Volumes.
[ 3.373323] systemd[1]: Reached target Login Prompts.
[ 3.373427] systemd[1]: Reached target Paths.
[ 3.373525] systemd[1]: Reached target Slices.
[ 3.373622] systemd[1]: Reached target Swap.
[ 3.373754] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.374706] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.375176] usb 1-1.1: New USB device found, idVendor=17ef, idProduct=1003, bcdDevice= 1.00
[ 3.375181] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.375185] usb 1-1.1: Product: Integrated Smart Card Reader
[ 3.375189] usb 1-1.1: Manufacturer: Lenovo
[ 3.375297] systemd[1]: Listening on LVM2 poll daemon socket.
[ 3.376362] systemd[1]: Listening on Process Core Dump Socket.
[ 3.376548] systemd[1]: Listening on Journal Audit Socket.
[ 3.376698] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.376851] systemd[1]: Listening on Journal Socket.
[ 3.377465] systemd[1]: Listening on udev Control Socket.
[ 3.377606] systemd[1]: Listening on udev Kernel Socket.
[ 3.378318] systemd[1]: Mounting Huge Pages File System...
[ 3.379001] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.379765] systemd[1]: Mounting Kernel Debug File System...
[ 3.380477] systemd[1]: Mounting Kernel Trace File System...
[ 3.381375] systemd[1]: Mounting Temporary Directory (/tmp)...
[ 3.382295] systemd[1]: Starting Kernel Module supporting RPCSEC_GSS...
[ 3.383014] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 3.383669] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 3.383786] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 3.384791] systemd[1]: Starting Set Up Additional Binary Formats...
[ 3.386057] systemd[1]: Starting Journal Service...
[ 3.386797] systemd[1]: Starting Load Kernel Modules...
[ 3.387420] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.387536] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[ 3.388107] systemd[1]: Starting Coldplug All udev Devices...
[ 3.389370] systemd[1]: Mounted Huge Pages File System.
[ 3.389562] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.389745] systemd[1]: Mounted Kernel Debug File System.
[ 3.390854] systemd[1]: Mounted Kernel Trace File System.
[ 3.391898] systemd[1]: Mounted Temporary Directory (/tmp).
[ 3.393283] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 3.397571] random: lvm: uninitialized urandom read (4 bytes read)
[ 3.398982] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 290 (systemd-binfmt)
[ 3.399789] acpi_call: loading out-of-tree module taints kernel.
[ 3.399814] acpi_call: module verification failed: signature and/or required key missing - tainting kernel
[ 3.399997] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[ 3.402131] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 3.407016] systemd[1]: Finished Set Up Additional Binary Formats.
[ 3.410103] i2c /dev entries driver
[ 3.425242] RPC: Registered named UNIX socket transport module.
[ 3.425243] RPC: Registered udp transport module.
[ 3.425243] RPC: Registered tcp transport module.
[ 3.425244] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.433314] systemd[1]: Finished Kernel Module supporting RPCSEC_GSS.
[ 3.437924] vboxdrv: Found 8 processor cores
[ 3.448940] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[ 3.453899] systemd[1]: Finished Coldplug All udev Devices.
[ 3.459216] vboxdrv: TSC mode is Invariant, tentative frequency 2693877307 Hz
[ 3.459216] vboxdrv: Successfully loaded version 6.1.16 (interface 0x00300000)
[ 3.463442] VBoxNetAdp: Successfully started.
[ 3.466015] VBoxNetFlt: Successfully started.
[ 3.467237] systemd[1]: Finished Load Kernel Modules.
[ 3.468124] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 3.468797] systemd[1]: Mounting Kernel Configuration File System...
[ 3.470229] systemd[1]: Starting Apply Kernel Variables...
[ 3.471508] systemd[1]: Mounted Kernel Configuration File System.
[ 3.494751] systemd[1]: Finished Apply Kernel Variables.
[ 3.523580] BTRFS info (device sda4): disk space caching is enabled
[ 3.524820] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 3.525999] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[ 3.527312] systemd[1]: Starting Rebuild Hardware Database...
[ 3.528832] systemd[1]: Starting Load/Save Random Seed...
[ 3.530500] systemd[1]: Starting Create System Users...
[ 3.546688] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01
[ 3.546690] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.546691] usb 1-1.3: Product: Biometric Coprocessor
[ 3.546692] usb 1-1.3: Manufacturer: Auth
[ 3.582298] usb 4-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 3.599580] usb 4-3: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[ 3.599582] usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 3.599583] usb 4-3: Product: Ugreen Storage Device
[ 3.599584] usb 4-3: Manufacturer: Ugreen
[ 3.599585] usb 4-3: SerialNumber: 091910212840
[ 3.615252] systemd[1]: Finished Create System Users.
[ 3.616056] audit: type=1130 audit(1605096697.689:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.616802] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.622271] usb 1-1.5: new full-speed USB device number 5 using ehci-pci
[ 3.625932] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 3.626732] audit: type=1130 audit(1605096697.699:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.639020] systemd[1]: Started Journal Service.
[ 3.640045] audit: type=1130 audit(1605096697.712:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.648947] usb 3-1.8.2: new full-speed USB device number 4 using ehci-pci
[ 3.720911] usb 1-1.5: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
[ 3.720912] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.749933] usb 3-1.8.2: New USB device found, idVendor=2516, idProduct=0020, bcdDevice= 1.22
[ 3.749935] usb 3-1.8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.749936] usb 3-1.8.2: Product: Quickfire Rapid i
[ 3.749937] usb 3-1.8.2: Manufacturer: CM Storm
[ 3.789884] audit: type=1130 audit(1605096697.862:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.792279] usb 1-1.6: new high-speed USB device number 6 using ehci-pci
[ 3.838957] usb 3-1.8.4: new high-speed USB device number 5 using ehci-pci
[ 3.896720] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2db, bcdDevice= 5.64
[ 3.896727] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.896729] usb 1-1.6: Product: Integrated Camera
[ 3.896732] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 3.938210] usb 3-1.8.4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.32
[ 3.938216] usb 3-1.8.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.938218] usb 3-1.8.4: Product: USB2.0 Hub
[ 3.938916] hub 3-1.8.4:1.0: USB hub found
[ 3.939414] hub 3-1.8.4:1.0: 2 ports detected
[ 3.996470] audit: type=1130 audit(1605096698.069:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hwdb-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.998117] audit: type=1334 audit(1605096698.069:7): prog-id=5 op=LOAD
[ 3.998230] audit: type=1334 audit(1605096698.069:8): prog-id=6 op=LOAD
[ 4.028942] usb 3-1.8.6: new full-speed USB device number 6 using ehci-pci
[ 4.131182] usb 3-1.8.6: New USB device found, idVendor=045e, idProduct=0719, bcdDevice= 1.00
[ 4.131184] usb 3-1.8.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.131185] usb 3-1.8.6: Product: Xbox 360 Wireless Receiver for Windows
[ 4.131186] usb 3-1.8.6: Manufacturer: ©Microsoft
[ 4.131186] usb 3-1.8.6: SerialNumber: E01578E0
[ 4.244765] audit: type=1130 audit(1605096698.316:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.247519] audit: type=1130 audit(1605096698.319:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.321366] ACPI: AC Adapter [AC] (on-line)
[ 4.329929] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 4.330135] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 4.331924] Non-volatile memory driver v1.3
[ 4.338159] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20200717/utaddress-204)
[ 4.338166] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.338169] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200717/utaddress-204)
[ 4.338172] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.338173] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200717/utaddress-204)
[ 4.338176] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.338177] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200717/utaddress-204)
[ 4.338180] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.338181] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.342639] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 4.342641] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 4.342642] thinkpad_acpi: ThinkPad BIOS CBET4000 4.12-3954-gd00af4fbac-dirty, EC G1HT32WW-3.22
[ 4.342643] thinkpad_acpi: Lenovo ThinkPad T430, model 2347B85
[ 4.343844] thinkpad_acpi: radio switch found; radios are enabled
[ 4.343978] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 4.343991] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 4.343992] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 4.344733] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 4.347478] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 4.347558] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 4.351248] thinkpad_acpi: battery 1 registered (start 75, stop 80)
[ 4.351257] battery: new extension: ThinkPad Battery Extension
[ 4.351324] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 4.365862] random: mktemp: uninitialized urandom read (6 bytes read)
[ 4.365919] random: mktemp: uninitialized urandom read (6 bytes read)
[ 4.374846] e1000e: Intel(R) PRO/1000 Network Driver
[ 4.374848] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 4.375089] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.413169] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 4.461943] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 4.462255] i2c i2c-9: 2/2 memory slots populated (from DMI)
[ 4.463203] i2c i2c-9: Successfully instantiated SPD at 0x50
[ 4.464411] i2c i2c-9: Successfully instantiated SPD at 0x51
[ 4.468822] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.472128] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.474542] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 4.474544] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 4.474544] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 4.474545] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 4.479356] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 4.482577] cryptd: max_cpu_qlen set to 1000
[ 4.505604] usb 3-1.8.1: new full-speed USB device number 7 using ehci-pci
[ 4.511200] urandom_read: 6 callbacks suppressed
[ 4.511201] random: mktemp: uninitialized urandom read (6 bytes read)
[ 4.558343] Intel(R) Wireless WiFi driver for Linux
[ 4.559823] at24 9-0050: supply vcc not found, using dummy regulator
[ 4.560275] AVX version of gcm_enc/dec engaged.
[ 4.560276] AES CTR mode by8 optimization enabled
[ 4.560461] iTCO_vendor_support: vendor-support=0
[ 4.562089] at24 9-0050: 256 byte spd EEPROM, read-only
[ 4.562125] at24 9-0051: supply vcc not found, using dummy regulator
[ 4.562717] at24 9-0051: 256 byte spd EEPROM, read-only
[ 4.564888] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.568092] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.568145] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 4.568337] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.573432] device-mapper: uevent: version 1.0.3
[ 4.573513] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[ 4.577056] iwlwifi 0000:02:00.0: loaded firmware version 17.3216344376.0 7260-17.ucode op_mode iwlmvm
[ 4.579291] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:12:10:56
[ 4.579299] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.579332] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 4.605904] usb 3-1.8.1: New USB device found, idVendor=1af3, idProduct=0001, bcdDevice= 0.01
[ 4.605907] usb 3-1.8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.605908] usb 3-1.8.1: Product: ZOWIE Gaming mouse
[ 4.605909] usb 3-1.8.1: Manufacturer: Kingsis Peripherals
[ 4.623332] e1000e 0000:00:19.0 eno0: renamed from eth0
[ 4.677109] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3202: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 4.677111] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.677113] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 4.677114] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.677115] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.677116] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 4.677118] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 4.677119] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 4.758737] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[ 4.764546] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.764606] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.764660] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.764714] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.764771] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 4.766695] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 4.766765] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 4.766827] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 4.777069] iwlwifi 0000:02:00.0: base HW address: a0:a8:cd:96:e9:2a
[ 4.852272] random: crng init done
[ 4.943634] intel_rapl_common: Found RAPL domain package
[ 4.943637] intel_rapl_common: Found RAPL domain core
[ 4.943638] intel_rapl_common: Found RAPL domain uncore
[ 4.994536] iwlwifi 0000:02:00.0: iwlmvm doesn't allow to disable HW crypto, check swcrypto module parameter
[ 4.995884] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 5.001907] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 5.139458] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[ 5.199337] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
[ 5.199342] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 5.236923] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 5.240681] mousedev: PS/2 mouse device common for all mice
[ 5.628076] usbcore: registered new interface driver usb-storage
[ 5.660283] scsi host6: uas
[ 5.660592] usbcore: registered new interface driver uas
[ 5.660663] scsi 6:0:0:0: Direct-Access HGST HTS 541010A9E680 0 PQ: 0 ANSI: 6
[ 5.661645] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 5.661647] sd 6:0:0:0: [sdc] 4096-byte physical blocks
[ 5.661761] sd 6:0:0:0: [sdc] Write Protect is off
[ 5.661763] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 5.661923] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.662124] sd 6:0:0:0: [sdc] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[ 6.271230] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 6.271952] mc: Linux media interface: v0.10
[ 6.294766] videodev: Linux video capture interface: v2.00
[ 6.373092] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2db)
[ 6.385762] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input18
[ 6.385935] usbcore: registered new interface driver uvcvideo
[ 6.385936] USB Video Class driver (1.1.1)
[ 6.424488] Bluetooth: Core ver 2.22
[ 6.424508] NET: Registered protocol family 31
[ 6.424509] Bluetooth: HCI device and connection manager initialized
[ 6.424513] Bluetooth: HCI socket layer initialized
[ 6.424516] Bluetooth: L2CAP socket layer initialized
[ 6.424520] Bluetooth: SCO socket layer initialized
[ 6.525603] mei_me 0000:00:16.0: wait hw ready failed
[ 6.526212] usbcore: registered new interface driver btusb
[ 6.526402] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 6.527292] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 6.539401] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 6.540122] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 6.557375] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.557377] Bluetooth: BNEP filters: protocol multicast
[ 6.557380] Bluetooth: BNEP socket layer initialized
[ 6.742409] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[ 6.759421] Bluetooth: hci0: Intel BT fw patch 0x57 completed & activated
[ 6.815216] NET: Registered protocol family 38
[ 7.026128] sdc: sdc1
[ 7.031360] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 7.033143] hid: raw HID events driver (C) Jiri Kosina
[ 7.045784] usbcore: registered new interface driver usbhid
[ 7.045785] usbhid: USB HID core driver
[ 7.055691] input: CM Storm Quickfire Rapid i as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.2/3-1.8.2:1.0/0003:2516:0020.0001/input/input19
[ 7.086403] usbcore: registered new interface driver xpad
[ 7.112474] hid-generic 0003:2516:0020.0001: input,hidraw0: USB HID v1.11 Keyboard [CM Storm Quickfire Rapid i] on usb-0000:00:1d.0-1.8.2/input0
[ 7.112641] hid-generic 0003:2516:0020.0002: hiddev0,hidraw1: USB HID v1.11 Device [CM Storm Quickfire Rapid i] on usb-0000:00:1d.0-1.8.2/input1
[ 7.112821] input: CM Storm Quickfire Rapid i System Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.2/3-1.8.2:1.2/0003:2516:0020.0003/input/input20
[ 7.169053] input: CM Storm Quickfire Rapid i Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.2/3-1.8.2:1.2/0003:2516:0020.0003/input/input21
[ 7.169124] input: CM Storm Quickfire Rapid i Keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.2/3-1.8.2:1.2/0003:2516:0020.0003/input/input22
[ 7.169196] hid-generic 0003:2516:0020.0003: input,hidraw2: USB HID v1.11 Keyboard [CM Storm Quickfire Rapid i] on usb-0000:00:1d.0-1.8.2/input2
[ 7.169309] input: Kingsis Peripherals ZOWIE Gaming mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.1/3-1.8.1:1.0/0003:1AF3:0001.0004/input/input23
[ 7.169413] hid-generic 0003:1AF3:0001.0004: input,hidraw3: USB HID v1.11 Mouse [Kingsis Peripherals ZOWIE Gaming mouse] on usb-0000:00:1d.0-1.8.1/input0
[ 7.308204] BTRFS: device label Beta devid 1 transid 28884 /dev/sdc1 scanned by systemd-udevd (339)
[ 7.322524] BTRFS info (device sdc1): enabling auto defrag
[ 7.322527] BTRFS info (device sdc1): disk space caching is enabled
[ 7.322528] BTRFS info (device sdc1): has skinny extents
[ 8.658942] mei_me 0000:00:16.0: wait hw ready failed
[ 8.658947] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 8.658962] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 10.792275] mei_me 0000:00:16.0: wait hw ready failed
[ 10.792279] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 10.792286] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 10.792287] mei_me 0000:00:16.0: reset failed ret = -19
[ 10.792288] mei_me 0000:00:16.0: link layer initialization failed.
[ 10.792289] mei_me 0000:00:16.0: init hw failure.
[ 10.792369] mei_me 0000:00:16.0: initialization failed.
[ 11.450775] e1000e 0000:00:19.0 eno0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 11.450814] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready
[ 11.578949] lvbr: port 1(eno0) entered blocking state
[ 11.579004] lvbr: port 1(eno0) entered disabled state
[ 11.579167] device eno0 entered promiscuous mode
[ 11.579261] lvbr: port 1(eno0) entered blocking state
[ 11.579264] lvbr: port 1(eno0) entered forwarding state
[ 11.579320] IPv6: ADDRCONF(NETDEV_CHANGE): lvbr: link becomes ready
[ 12.472462] lvbr: port 1(eno0) entered disabled state
[ 14.882185] fuse: init (API version 7.31)
[ 15.617613] Bluetooth: RFCOMM TTY layer initialized
[ 15.617619] Bluetooth: RFCOMM socket layer initialized
[ 15.617623] Bluetooth: RFCOMM ver 1.11
[ 16.300704] e1000e 0000:00:19.0 eno0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 16.300760] lvbr: port 1(eno0) entered blocking state
[ 16.300762] lvbr: port 1(eno0) entered forwarding state
[ 17.521376] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 17.629934] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 652.252229] Adding 262140k swap on /var/lib/systemd-swap/swapfc/1. Priority:50 extents:1 across:262140k DscFS