blob: 5d85a3d6f6c13b5b912f88ef057c5b21a0cec975 [file] [log] [blame]
[ 0.000000] Linux version 5.3.6-artix1-1-ARTIX (builduser@orion) (gcc version 9.2.0 (GCC)) #1 SMP PREEMPT Sun Oct 13 15:42:39 UTC 2019
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda1 rw net.ifnames=0 iomem=relaxed quiet resume=UUID=6be78740-528b-47a6-b3fb-41e95e99fe10
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] random: get_random_u32 called from bsp_init_amd+0x278/0x330 with crng_init=0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000afb0ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000afb10000-0x00000000afc77fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000afc78000-0x00000000afcd1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000afcd2000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: LENOVO *INVALID*/*INVALID*, BIOS CBET4000 4.10-1402-gfb2a9d5ed8 11/06/2019
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2495.502 MHz processor
[ 0.003732] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.003734] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.003739] last_pfn = 0x42f000 max_arch_pfn = 0x400000000
[ 0.003745] MTRR default type: uncachable
[ 0.003746] MTRR fixed ranges enabled:
[ 0.003748] 00000-9FFFF write-back
[ 0.003750] A0000-BFFFF uncachable
[ 0.003751] C0000-FFFFF write-back
[ 0.003752] MTRR variable ranges enabled:
[ 0.003754] 0 base 0000FFC00000 mask FFFFFFC00000 write-protect
[ 0.003756] 1 base 0000A0000000 mask FFFFF0000000 write-back
[ 0.003758] 2 base 000080000000 mask FFFFE0000000 write-back
[ 0.003760] 3 base 000000000000 mask FFFF80000000 write-back
[ 0.003761] 4 disabled
[ 0.003762] 5 disabled
[ 0.003762] 6 disabled
[ 0.003763] 7 disabled
[ 0.003765] TOM2: 000000042f000000 aka 17136M
[ 0.004135] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.004257] last_pfn = 0xafcd2 max_arch_pfn = 0x400000000
[ 0.005003] found SMP MP-table at [mem 0x000f0f40-0x000f0f4f]
[ 0.005128] check: Scanning 1 areas for low memory corruption
[ 0.005133] Using GB pages for direct mapping
[ 0.005135] BRK [0x17cc01000, 0x17cc01fff] PGTABLE
[ 0.005138] BRK [0x17cc02000, 0x17cc02fff] PGTABLE
[ 0.005140] BRK [0x17cc03000, 0x17cc03fff] PGTABLE
[ 0.005188] BRK [0x17cc04000, 0x17cc04fff] PGTABLE
[ 0.005190] BRK [0x17cc05000, 0x17cc05fff] PGTABLE
[ 0.005437] BRK [0x17cc06000, 0x17cc06fff] PGTABLE
[ 0.005491] BRK [0x17cc07000, 0x17cc07fff] PGTABLE
[ 0.005546] BRK [0x17cc08000, 0x17cc08fff] PGTABLE
[ 0.005633] RAMDISK: [mem 0x3759b000-0x37ac4fff]
[ 0.005638] ACPI: Early table checksum verification disabled
[ 0.005642] ACPI: RSDP 0x00000000000F1190 000024 (v02 COREv4)
[ 0.005647] ACPI: XSDT 0x00000000AFCD80E0 00006C (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.005654] ACPI: FACP 0x00000000AFCDA620 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.005662] ACPI: DSDT 0x00000000AFCD8280 00239F (v02 COREv4 COREBOOT 00010001 INTL 20190703)
[ 0.005667] ACPI: FACS 0x00000000AFCD8240 000040
[ 0.005670] ACPI: FACS 0x00000000AFCD8240 000040
[ 0.005673] ACPI: SSDT 0x00000000AFCDA720 00008A (v02 COREv4 COREBOOT 0000002A CORE 20190703)
[ 0.005677] ACPI: APIC 0x00000000AFCDA7B0 000072 (v02 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.005681] ACPI: HPET 0x00000000AFCDA830 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.005685] ACPI: HEST 0x00000000AFCDA870 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.005689] ACPI: IVRS 0x00000000AFCDAA40 000070 (v02 AMD AMDIOMMU 00000001 AMD 00000000)
[ 0.005693] ACPI: SSDT 0x00000000AFCDAAB0 001ED4 (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.005697] ACPI: SSDT 0x00000000AFCDC990 0009F8 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.005701] ACPI: VFCT 0x00000000AFCDD390 008069 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.005709] ACPI: Local APIC address 0xfee00000
[ 0.005861] No NUMA configuration found
[ 0.005863] Faking a node at [mem 0x0000000000000000-0x000000042effffff]
[ 0.005867] NODE_DATA(0) allocated [mem 0x42effc000-0x42effffff]
[ 0.005906] Zone ranges:
[ 0.005907] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.005909] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.005911] Normal [mem 0x0000000100000000-0x000000042effffff]
[ 0.005912] Device empty
[ 0.005913] Movable zone start for each node
[ 0.005914] Early memory node ranges
[ 0.005915] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.005917] node 0: [mem 0x0000000000100000-0x00000000afb0ffff]
[ 0.005918] node 0: [mem 0x00000000afc78000-0x00000000afcd1fff]
[ 0.005919] node 0: [mem 0x0000000100000000-0x000000042effffff]
[ 0.005942] Zeroed struct page in unavailable ranges: 1272 pages
[ 0.005944] Initmem setup node 0 [mem 0x0000000000001000-0x000000042effffff]
[ 0.005946] On node 0 totalpages: 4057864
[ 0.005947] DMA zone: 64 pages used for memmap
[ 0.005948] DMA zone: 21 pages reserved
[ 0.005949] DMA zone: 3998 pages, LIFO batch:0
[ 0.006018] DMA32 zone: 11182 pages used for memmap
[ 0.006019] DMA32 zone: 715626 pages, LIFO batch:63
[ 0.019551] Normal zone: 52160 pages used for memmap
[ 0.019552] Normal zone: 3338240 pages, LIFO batch:63
[ 0.076279] ACPI: PM-Timer IO Port: 0x818
[ 0.076282] ACPI: Local APIC address 0xfee00000
[ 0.076290] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.076299] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.076302] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.076304] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.076306] ACPI: IRQ0 used by override.
[ 0.076307] ACPI: IRQ9 used by override.
[ 0.076310] Using ACPI (MADT) for SMP configuration information
[ 0.076311] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.076317] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.076333] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.076335] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.076336] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.076337] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.076339] PM: Registered nosave memory: [mem 0xafb10000-0xafc77fff]
[ 0.076340] PM: Registered nosave memory: [mem 0xafcd2000-0xcfffffff]
[ 0.076341] PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
[ 0.076342] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.076343] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
[ 0.076346] [mem 0xd0000000-0xf7ffffff] available for PCI devices
[ 0.076347] Booting paravirtualized kernel on bare hardware
[ 0.076350] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.230761] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[ 0.231316] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.231324] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.231325] pcpu-alloc: [0] 0 1 2 3
[ 0.231351] Built 1 zonelists, mobility grouping on. Total pages: 3994437
[ 0.231352] Policy zone: Normal
[ 0.231354] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda1 rw net.ifnames=0 iomem=relaxed quiet resume=UUID=6be78740-528b-47a6-b3fb-41e95e99fe10
[ 0.234728] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.236368] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.236396] mem auto-init: stack:byref_all, heap alloc:off, heap free:off
[ 0.249566] Calgary: detecting Calgary via BIOS EBDA area
[ 0.249568] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.322682] Memory: 15851936K/16231456K available (12291K kernel code, 1321K rwdata, 3952K rodata, 1632K init, 3548K bss, 379520K reserved, 0K cma-reserved)
[ 0.322868] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.322884] ftrace: allocating 37810 entries in 148 pages
[ 0.346679] rcu: Preemptible hierarchical RCU implementation.
[ 0.346681] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.346681] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.346682] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.346683] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.346684] Tasks RCU enabled.
[ 0.346685] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.346686] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.349421] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
[ 0.349706] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.349785] spurious 8259A interrupt: IRQ7.
[ 0.349807] Console: colour dummy device 80x25
[ 0.349812] printk: console [tty0] enabled
[ 0.349838] ACPI: Core revision 20190703
[ 0.350020] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.350035] APIC: Switch to symmetric I/O mode setup
[ 0.385589] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.400036] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f8a0b4cc4, max_idle_ns: 440795204781 ns
[ 0.400044] Calibrating delay loop (skipped), value calculated using timer frequency.. 4993.96 BogoMIPS (lpj=8318340)
[ 0.400047] pid_max: default: 32768 minimum: 301
[ 0.400100] LSM: Security Framework initializing
[ 0.400105] Yama: becoming mindful.
[ 0.400188] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.400253] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.400460] *** VALIDATE proc ***
[ 0.400536] *** VALIDATE cgroup1 ***
[ 0.400537] *** VALIDATE cgroup2 ***
[ 0.400597] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.400598] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.400602] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.400604] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.400605] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.400607] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.400608] Spectre V2 : User space: Vulnerable
[ 0.400609] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.400848] Freeing SMP alternatives memory: 32K
[ 0.511962] smpboot: CPU0: AMD A10-5750M APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x13, stepping: 0x1)
[ 0.530066] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.530074] ... version: 0
[ 0.530075] ... bit width: 48
[ 0.530075] ... generic registers: 6
[ 0.530076] ... value mask: 0000ffffffffffff
[ 0.530077] ... max period: 00007fffffffffff
[ 0.530078] ... fixed-purpose events: 0
[ 0.530079] ... event mask: 000000000000003f
[ 0.536724] rcu: Hierarchical SRCU implementation.
[ 0.560086] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.566736] smp: Bringing up secondary CPUs ...
[ 0.606752] x86: Booting SMP configuration:
[ 0.606755] .... node #0, CPUs: #1
[ 0.033650] do_IRQ: 1.55 No irq handler for vector
[ 0.646754] #2
[ 0.033650] do_IRQ: 2.55 No irq handler for vector
[ 0.686752] #3
[ 0.033650] do_IRQ: 3.55 No irq handler for vector
[ 0.688939] smp: Brought up 1 node, 4 CPUs
[ 0.688939] smpboot: Max logical packages: 1
[ 0.688939] smpboot: Total of 4 processors activated (19972.85 BogoMIPS)
[ 0.690535] devtmpfs: initialized
[ 0.690535] x86/mm: Memory block size: 128MB
[ 0.693568] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.693568] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.693568] pinctrl core: initialized pinctrl subsystem
[ 0.693588] PM: RTC time: 05:54:37, date: 2019-11-07
[ 0.693790] NET: Registered protocol family 16
[ 0.693908] audit: initializing netlink subsys (disabled)
[ 0.693927] audit: type=2000 audit(1573106076.313:1): state=initialized audit_enabled=0 res=1
[ 0.696730] cpuidle: using governor ladder
[ 0.696748] cpuidle: using governor menu
[ 0.696792] ACPI: bus type PCI registered
[ 0.696795] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.696892] PCI: Using configuration type 1 for base access
[ 0.696893] PCI: Using configuration type 1 for extended access
[ 0.698138] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.698139] mtrr: probably your BIOS does not setup all CPUs.
[ 0.698139] mtrr: corrected configuration.
[ 0.700416] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.700416] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.706848] fbcon: Taking over console
[ 0.706885] ACPI: Added _OSI(Module Device)
[ 0.706887] ACPI: Added _OSI(Processor Device)
[ 0.706888] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.706890] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.706892] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.706894] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.706905] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.711205] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.713048] ACPI: EC: EC started
[ 0.713049] ACPI: EC: interrupt blocked
[ 0.713428] ACPI: \_SB_.PCI0.LIBR.EC0_: Used as first EC
[ 0.713431] ACPI: \_SB_.PCI0.LIBR.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.713432] ACPI: \_SB_.PCI0.LIBR.EC0_: Boot DSDT EC used to handle transactions
[ 0.713433] ACPI: Interpreter enabled
[ 0.713463] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.713464] ACPI: Using IOAPIC for interrupt routing
[ 0.713483] HEST: Table parsing has been initialized.
[ 0.713486] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.713758] ACPI: Enabled 8 GPEs in block 00 to 1F
[ 0.718592] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.718599] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.718675] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.718754] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored
[ 0.719047] PCI host bridge to bus 0000:00
[ 0.719049] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.719052] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.719053] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.719055] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.719057] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
[ 0.719059] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.719071] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.719206] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
[ 0.719345] pci 0000:00:01.0: [1002:990b] type 00 class 0x030000
[ 0.719358] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.719364] pci 0000:00:01.0: reg 0x14: [io 0x3000-0x30ff]
[ 0.719369] pci 0000:00:01.0: reg 0x18: [mem 0xf0380000-0xf03bffff]
[ 0.719387] pci 0000:00:01.0: enabling Extended Tags
[ 0.719416] pci 0000:00:01.0: supports D1 D2
[ 0.719519] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.719531] pci 0000:00:01.1: reg 0x10: [mem 0xf03c0000-0xf03c3fff]
[ 0.719556] pci 0000:00:01.1: enabling Extended Tags
[ 0.719582] pci 0000:00:01.1: supports D1 D2
[ 0.719687] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
[ 0.719714] pci 0000:00:02.0: enabling Extended Tags
[ 0.719744] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.719866] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[ 0.719892] pci 0000:00:04.0: enabling Extended Tags
[ 0.719922] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.720097] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
[ 0.720130] pci 0000:00:05.0: enabling Extended Tags
[ 0.720160] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.720292] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.720310] pci 0000:00:11.0: reg 0x10: [io 0x3410-0x3417]
[ 0.720318] pci 0000:00:11.0: reg 0x14: [io 0x3420-0x3423]
[ 0.720327] pci 0000:00:11.0: reg 0x18: [io 0x3418-0x341f]
[ 0.720335] pci 0000:00:11.0: reg 0x1c: [io 0x3424-0x3427]
[ 0.720343] pci 0000:00:11.0: reg 0x20: [io 0x3400-0x340f]
[ 0.720352] pci 0000:00:11.0: reg 0x24: [mem 0xf03cb000-0xf03cb7ff]
[ 0.720487] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.720503] pci 0000:00:12.0: reg 0x10: [mem 0xf03c8000-0xf03c8fff]
[ 0.720662] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.720681] pci 0000:00:12.2: reg 0x10: [mem 0xf03cc000-0xf03cc0ff]
[ 0.720751] pci 0000:00:12.2: supports D1 D2
[ 0.720753] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.720869] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.720885] pci 0000:00:13.0: reg 0x10: [mem 0xf03c9000-0xf03c9fff]
[ 0.721043] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.721062] pci 0000:00:13.2: reg 0x10: [mem 0xf03cd000-0xf03cd0ff]
[ 0.721132] pci 0000:00:13.2: supports D1 D2
[ 0.721134] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.721249] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.721411] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.721433] pci 0000:00:14.2: reg 0x10: [mem 0xf03c4000-0xf03c7fff 64bit]
[ 0.721492] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.721604] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.721765] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.721908] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
[ 0.721925] pci 0000:00:16.0: reg 0x10: [mem 0xf03ca000-0xf03cafff]
[ 0.722082] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
[ 0.722101] pci 0000:00:16.2: reg 0x10: [mem 0xf03ce000-0xf03ce0ff]
[ 0.722172] pci 0000:00:16.2: supports D1 D2
[ 0.722173] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.722290] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.722400] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.722506] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.722613] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.722725] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.722831] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.722991] pci 0000:01:00.0: [1002:6665] type 00 class 0x038000
[ 0.723013] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.723023] pci 0000:01:00.0: reg 0x18: [mem 0xf0000000-0xf003ffff 64bit]
[ 0.723030] pci 0000:01:00.0: reg 0x20: [io 0x1000-0x10ff]
[ 0.723042] pci 0000:01:00.0: reg 0x30: [mem 0xf0040000-0xf005ffff pref]
[ 0.723049] pci 0000:01:00.0: enabling Extended Tags
[ 0.723097] pci 0000:01:00.0: supports D1 D2
[ 0.723099] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.723129] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x8 link at 0000:00:02.0 (capable of 63.008 Gb/s with 8 GT/s x8 link)
[ 0.723198] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.723202] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
[ 0.723205] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.723208] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.723267] pci 0000:02:00.0: [1969:10a0] type 00 class 0x020000
[ 0.723299] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf013ffff 64bit]
[ 0.723313] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
[ 0.723436] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.723581] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.723584] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.723587] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.723641] pci 0000:03:00.0: [168c:0034] type 00 class 0x028000
[ 0.723669] pci 0000:03:00.0: reg 0x10: [mem 0xf0200000-0xf027ffff 64bit]
[ 0.723708] pci 0000:03:00.0: reg 0x30: [mem 0xf0280000-0xf028ffff pref]
[ 0.723776] pci 0000:03:00.0: supports D1
[ 0.723778] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.723887] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.723892] pci 0000:00:05.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.723905] pci_bus 0000:04: extended config space not accessible
[ 0.723969] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.723977] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.723978] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.723980] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.723982] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.723984] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[ 0.724600] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.724683] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.724765] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.724846] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.724926] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.725006] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
[ 0.725083] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.725163] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.726734] ACPI: EC: interrupt unblocked
[ 0.726734] ACPI: EC: event unblocked
[ 0.726734] ACPI: \_SB_.PCI0.LIBR.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.726734] ACPI: \_SB_.PCI0.LIBR.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.726734] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.726734] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.726734] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.726734] vgaarb: loaded
[ 0.726962] ACPI: bus type USB registered
[ 0.726979] usbcore: registered new interface driver usbfs
[ 0.726988] usbcore: registered new interface driver hub
[ 0.727026] usbcore: registered new device driver usb
[ 0.727061] pps_core: LinuxPPS API ver. 1 registered
[ 0.727062] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.727066] PTP clock support registered
[ 0.727078] EDAC MC: Ver: 3.0.0
[ 0.727183] PCI: Using ACPI for IRQ routing
[ 0.727183] PCI: pci_cache_line_size set to 64 bytes
[ 0.727183] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.727183] e820: reserve RAM buffer [mem 0xafb10000-0xafffffff]
[ 0.727183] e820: reserve RAM buffer [mem 0xafcd2000-0xafffffff]
[ 0.727183] e820: reserve RAM buffer [mem 0x42f000000-0x42fffffff]
[ 0.727183] NetLabel: Initializing
[ 0.727183] NetLabel: domain hash size = 128
[ 0.727183] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.727183] NetLabel: unlabeled traffic allowed by default
[ 0.727183] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.727183] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.730226] clocksource: Switched to clocksource tsc-early
[ 0.749673] VFS: Disk quotas dquot_6.6.0
[ 0.749693] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.749730] *** VALIDATE hugetlbfs ***
[ 0.749794] pnp: PnP ACPI init
[ 0.750072] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
[ 0.750080] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.750115] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.750176] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.750219] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.758396] pnp: PnP ACPI: found 4 devices
[ 0.760973] thermal_sys: Registered thermal governor 'fair_share'
[ 0.760974] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.760983] thermal_sys: Registered thermal governor 'step_wise'
[ 0.760984] thermal_sys: Registered thermal governor 'user_space'
[ 0.760985] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.765529] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.765590] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.765594] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
[ 0.765597] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.765600] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.765604] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.765606] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.765609] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.765614] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.765617] pci 0000:00:05.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.765622] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.765634] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.765636] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.765638] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.765639] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.765641] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.765643] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.765645] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf00fffff]
[ 0.765646] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.765649] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.765652] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.765654] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.765656] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.765658] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.765659] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.765661] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.765663] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.765763] NET: Registered protocol family 2
[ 0.765952] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.765988] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.766248] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.766481] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.766536] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.766604] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.766736] NET: Registered protocol family 1
[ 0.766744] NET: Registered protocol family 44
[ 0.766761] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.766769] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[ 0.767410] pci 0000:00:12.2: PME# does not work under D3, disabling it
[ 0.767913] pci 0000:00:13.2: PME# does not work under D3, disabling it
[ 0.768450] pci 0000:00:16.2: PME# does not work under D3, disabling it
[ 0.768470] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.768476] PCI: CLS 64 bytes, default 64
[ 0.768538] Trying to unpack rootfs image as initramfs...
[ 0.878908] Freeing initrd memory: 5288K
[ 0.878926] pci 0000:00:00.2: AMD-Vi: Applying erratum 746 workaround
[ 0.879133] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 0.879135] pci 0000:00:00.2: PCI INT A: no GSI
[ 0.879374] pci 0000:00:01.0: Adding to iommu group 0
[ 0.879397] pci 0000:00:01.1: Adding to iommu group 0
[ 0.879472] pci 0000:00:02.0: Adding to iommu group 1
[ 0.879553] pci 0000:00:04.0: Adding to iommu group 2
[ 0.879624] pci 0000:00:05.0: Adding to iommu group 3
[ 0.879705] pci 0000:00:11.0: Adding to iommu group 4
[ 0.879790] pci 0000:00:12.0: Adding to iommu group 5
[ 0.879810] pci 0000:00:12.2: Adding to iommu group 5
[ 0.879905] pci 0000:00:13.0: Adding to iommu group 6
[ 0.879925] pci 0000:00:13.2: Adding to iommu group 6
[ 0.880017] pci 0000:00:14.0: Adding to iommu group 7
[ 0.880037] pci 0000:00:14.2: Adding to iommu group 7
[ 0.880058] pci 0000:00:14.3: Adding to iommu group 7
[ 0.880141] pci 0000:00:14.4: Adding to iommu group 8
[ 0.880228] pci 0000:00:16.0: Adding to iommu group 9
[ 0.880250] pci 0000:00:16.2: Adding to iommu group 9
[ 0.880371] pci 0000:00:18.0: Adding to iommu group 10
[ 0.880394] pci 0000:00:18.1: Adding to iommu group 10
[ 0.880417] pci 0000:00:18.2: Adding to iommu group 10
[ 0.880441] pci 0000:00:18.3: Adding to iommu group 10
[ 0.880463] pci 0000:00:18.4: Adding to iommu group 10
[ 0.880487] pci 0000:00:18.5: Adding to iommu group 10
[ 0.880501] pci 0000:01:00.0: Adding to iommu group 1
[ 0.880520] pci 0000:02:00.0: Adding to iommu group 2
[ 0.880536] pci 0000:03:00.0: Adding to iommu group 3
[ 0.881055] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[ 0.881057] pci 0000:00:00.2: AMD-Vi: Extended features (0x800000853):
[ 0.881058] PreF PPR GT IA
[ 0.881061] AMD-Vi: Interrupt remapping enabled
[ 0.881275] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.884030] amd_uncore: AMD NB counters detected
[ 0.884233] LVT offset 0 assigned for vector 0x400
[ 0.884283] perf: AMD IBS detected (0x000000ff)
[ 0.884350] check: Scanning for low memory corruption every 60 seconds
[ 0.884939] Initialise system trusted keyrings
[ 0.884951] Key type blacklist registered
[ 0.885102] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.887266] zbud: loaded
[ 0.894859] Key type asymmetric registered
[ 0.894861] Asymmetric key parser 'x509' registered
[ 0.894883] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.894974] io scheduler mq-deadline registered
[ 0.894975] io scheduler kyber registered
[ 0.895028] io scheduler bfq registered
[ 0.895603] pcieport 0000:00:02.0: PME: Signaling with IRQ 25
[ 0.895855] pcieport 0000:00:04.0: PME: Signaling with IRQ 26
[ 0.896089] pcieport 0000:00:05.0: PME: Signaling with IRQ 27
[ 0.896171] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.896282] vesafb: mode is 1366x768x32, linelength=5632, pages=0
[ 0.896283] vesafb: scrolling: redraw
[ 0.896285] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.896302] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 4224k, total 4224k
[ 0.896513] Console: switching to colour frame buffer device 170x48
[ 0.909846] fb0: VESA VGA frame buffer device
[ 0.909919] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.911373] ACPI: Lid Switch [LID]
[ 0.911423] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.911434] ACPI: Power Button [PWRB]
[ 0.911493] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.912326] ACPI: Power Button [PWRF]
[ 0.913049] GHES: Failed to enable APEI firmware first mode.
[ 0.913259] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.913782] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.914604] usbcore: registered new interface driver usbserial_generic
[ 0.914611] usbserial: USB Serial support registered for generic
[ 0.914653] rtc_cmos 00:01: RTC can wake from S4
[ 0.914792] rtc_cmos 00:01: registered as rtc0
[ 0.914815] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.914950] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.915007] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
[ 0.915266] NET: Registered protocol family 10
[ 0.924981] Segment Routing with IPv6
[ 0.925015] NET: Registered protocol family 17
[ 0.925422] RAS: Correctable Errors collector initialized.
[ 0.925478] microcode: CPU0: patch_level=0x0600111f
[ 0.925487] microcode: CPU1: patch_level=0x0600111f
[ 0.925498] microcode: CPU2: patch_level=0x0600111f
[ 0.925508] microcode: CPU3: patch_level=0x0600111f
[ 0.925563] microcode: Microcode Update Driver: v2.2.
[ 0.925578] sched_clock: Marking stable (895238698, 30317616)->(928501290, -2944976)
[ 0.925813] registered taskstats version 1
[ 0.925823] Loading compiled-in X.509 certificates
[ 0.931960] Loaded X.509 cert 'Build time autogenerated kernel key: 80fb11315e06762a874154cfce096b9e29b8cdc9'
[ 0.931998] zswap: loaded using pool lzo/zbud
[ 0.942296] Key type big_key registered
[ 0.942752] PM: Magic number: 11:973:920
[ 0.942921] rtc_cmos 00:01: setting system clock to 2019-11-07T05:54:37 UTC (1573106077)
[ 0.945338] Freeing unused decrypted memory: 2040K
[ 0.946019] Freeing unused kernel image memory: 1632K
[ 0.974787] Write protecting the kernel read-only data: 18432k
[ 0.975677] Freeing unused kernel image memory: 2012K
[ 0.975839] Freeing unused kernel image memory: 144K
[ 0.990262] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.990265] Run /init as init process
[ 1.001431] udevd[188]: starting version 3.2.8
[ 1.001657] random: udevd: uninitialized urandom read (16 bytes read)
[ 1.001690] random: udevd: uninitialized urandom read (16 bytes read)
[ 1.002768] udevd[189]: starting eudev-3.2.8
[ 1.023396] random: udevd: uninitialized urandom read (16 bytes read)
[ 1.053538] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.066134] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.081416] ehci-pci: EHCI PCI platform driver
[ 1.081658] QUIRK: Enable AMD PLL fix
[ 1.081690] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.081699] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.081707] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.081717] ehci-pci 0000:00:12.2: debug port 1
[ 1.081784] ehci-pci 0000:00:12.2: irq 17, io mem 0xf03cc000
[ 1.082033] SCSI subsystem initialized
[ 1.090147] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.090223] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.090389] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.094685] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.094787] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 1.094790] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.094793] usb usb1: Product: EHCI Host Controller
[ 1.094796] usb usb1: Manufacturer: Linux 5.3.6-artix1-1-ARTIX ehci_hcd
[ 1.094798] usb usb1: SerialNumber: 0000:00:12.2
[ 1.095000] hub 1-0:1.0: USB hub found
[ 1.095014] hub 1-0:1.0: 5 ports detected
[ 1.095564] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.095577] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.095583] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.095592] ehci-pci 0000:00:13.2: debug port 1
[ 1.095640] ehci-pci 0000:00:13.2: irq 17, io mem 0xf03cd000
[ 1.104658] libata version 3.00 loaded.
[ 1.109767] ahci 0000:00:11.0: version 3.0
[ 1.110064] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 1.110067] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio
[ 1.111135] scsi host0: ahci
[ 1.111349] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.111424] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 1.111426] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.111428] usb usb2: Product: EHCI Host Controller
[ 1.111430] usb usb2: Manufacturer: Linux 5.3.6-artix1-1-ARTIX ehci_hcd
[ 1.111431] usb usb2: SerialNumber: 0000:00:13.2
[ 1.111555] scsi host1: ahci
[ 1.111601] hub 2-0:1.0: USB hub found
[ 1.111612] hub 2-0:1.0: 5 ports detected
[ 1.111799] scsi host2: ahci
[ 1.111986] scsi host3: ahci
[ 1.112109] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.112117] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.112124] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.112135] ehci-pci 0000:00:16.2: debug port 1
[ 1.112156] scsi host4: ahci
[ 1.112181] ehci-pci 0000:00:16.2: irq 17, io mem 0xf03ce000
[ 1.112482] scsi host5: ahci
[ 1.112571] ata1: SATA max UDMA/133 abar m2048@0xf03cb000 port 0xf03cb100 irq 19
[ 1.112574] ata2: SATA max UDMA/133 abar m2048@0xf03cb000 port 0xf03cb180 irq 19
[ 1.112576] ata3: DUMMY
[ 1.112577] ata4: DUMMY
[ 1.112578] ata5: DUMMY
[ 1.112579] ata6: DUMMY
[ 1.124716] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.124965] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 1.124969] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.124971] usb usb3: Product: EHCI Host Controller
[ 1.124973] usb usb3: Manufacturer: Linux 5.3.6-artix1-1-ARTIX ehci_hcd
[ 1.124974] usb usb3: SerialNumber: 0000:00:16.2
[ 1.125179] hub 3-0:1.0: USB hub found
[ 1.125197] hub 3-0:1.0: 4 ports detected
[ 1.127203] ohci-pci: OHCI PCI platform driver
[ 1.127455] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.127466] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.127532] ohci-pci 0000:00:12.0: irq 18, io mem 0xf03c8000
[ 1.149732] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.186486] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[ 1.186490] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.186492] usb usb4: Product: OHCI PCI host controller
[ 1.186493] usb usb4: Manufacturer: Linux 5.3.6-artix1-1-ARTIX ohci_hcd
[ 1.186495] usb usb4: SerialNumber: 0000:00:12.0
[ 1.186770] hub 4-0:1.0: USB hub found
[ 1.186782] hub 4-0:1.0: 5 ports detected
[ 1.187219] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.187226] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.187260] ohci-pci 0000:00:13.0: irq 18, io mem 0xf03c9000
[ 1.246481] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[ 1.246485] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.246487] usb usb5: Product: OHCI PCI host controller
[ 1.246488] usb usb5: Manufacturer: Linux 5.3.6-artix1-1-ARTIX ohci_hcd
[ 1.246490] usb usb5: SerialNumber: 0000:00:13.0
[ 1.246847] hub 5-0:1.0: USB hub found
[ 1.246860] hub 5-0:1.0: 5 ports detected
[ 1.247311] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.247317] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6
[ 1.247353] ohci-pci 0000:00:16.0: irq 18, io mem 0xf03ca000
[ 1.306493] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[ 1.306497] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.306499] usb usb6: Product: OHCI PCI host controller
[ 1.306501] usb usb6: Manufacturer: Linux 5.3.6-artix1-1-ARTIX ohci_hcd
[ 1.306502] usb usb6: SerialNumber: 0000:00:16.0
[ 1.306784] hub 6-0:1.0: USB hub found
[ 1.306795] hub 6-0:1.0: 4 ports detected
[ 1.427541] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.429857] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.431584] ata2.00: ATAPI: ???, ???, max UDMA/133
[ 1.433541] ata2.00: configured for UDMA/133
[ 1.440167] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 1.477686] ata1.00: ATA-8: ???, ???, max UDMA/100
[ 1.477689] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.480064] ata1.00: configured for UDMA/100
[ 1.480312] scsi 0:0:0:0: Direct-Access ATA ??? 1A PQ: 0 ANSI: 5
[ 1.481265] scsi 1:0:0:0: CD-ROM ??? DE01 PQ: 0 ANSI: 5
[ 1.536616] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.536619] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.536655] sd 0:0:0:0: [sda] Write Protect is off
[ 1.536659] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.536718] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.587968] usb 2-2: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[ 1.587971] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.587973] usb 2-2: Product: USB2.0-CRW
[ 1.587975] usb 2-2: Manufacturer: Generic
[ 1.587977] usb 2-2: SerialNumber: ???
[ 1.594019] usbcore: registered new interface driver rtsx_usb
[ 1.648918] sda: sda1 sda2
[ 1.649681] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.706846] usb 4-3: new full-speed USB device number 2 using ohci-pci
[ 1.709181] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.709184] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.709637] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.896477] usb 4-3: string descriptor 0 read error: -22
[ 1.896483] usb 4-3: New USB device found, idVendor=13d3, idProduct=3393, bcdDevice= 0.01
[ 1.896485] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.900161] tsc: Refined TSC clocksource calibration: 2495.461 MHz
[ 1.900172] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f879d9e52, max_idle_ns: 440795232655 ns
[ 1.900205] clocksource: Switched to clocksource tsc
[ 2.166817] random: fast init done
[ 2.598222] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.022923] random: crng init done
[ 4.022925] random: 1 urandom warning(s) missed due to ratelimiting
[ 6.173355] udevd[715]: starting version 3.2.8
[ 6.804613] udevd[815]: starting eudev-3.2.8
[ 7.144637] acpi_cpufreq: overriding BIOS provided _PSD data
[ 7.281629] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 7.281633] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
[ 7.281800] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 7.283591] ACPI: AC Adapter [AC] (on-line)
[ 7.290106] battery: ACPI: Battery Slot [BATX] (battery absent)
[ 7.591384] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [???]
[ 7.615996] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 7.616184] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[ 7.616364] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 7.692223] Linux agpgart interface v0.103
[ 7.759117] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.793434] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.800077] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.245516] Bluetooth: Core ver 2.22
[ 8.245540] NET: Registered protocol family 31
[ 8.245541] Bluetooth: HCI device and connection manager initialized
[ 8.245547] Bluetooth: HCI socket layer initialized
[ 8.245550] Bluetooth: L2CAP socket layer initialized
[ 8.245554] Bluetooth: SCO socket layer initialized
[ 8.531008] cryptd: max_cpu_qlen set to 1000
[ 8.546467] usbcore: registered new interface driver btusb
[ 8.740573] usb 4-3: USB disconnect, device number 2
[ 8.741602] usbcore: registered new interface driver ath3k
[ 9.142858] AVX version of gcm_enc/dec engaged.
[ 9.142860] AES CTR mode by8 optimization enabled
[ 9.163512] usb 4-3: new full-speed USB device number 3 using ohci-pci
[ 9.356492] usb 4-3: string descriptor 0 read error: -22
[ 9.356502] usb 4-3: New USB device found, idVendor=13d3, idProduct=3393, bcdDevice= 0.02
[ 9.356506] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.772516] Adding 17550648k swap on /dev/sda2. Priority:-2 extents:1 across:17550648k FS
[ 11.011835] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f03)
[ 11.052220] psmouse serio1: elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
[ 11.093098] psmouse serio1: elantech: Elan sample query result 04, 5c, 85
[ 11.307196] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[ 11.339626] mousedev: PS/2 mouse device common for all mice
[ 12.292118] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 12.349587] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
[ 12.349681] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[ 12.349765] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
[ 12.349840] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
[ 12.455571] snd_hda_codec_conexant hdaudioC1D0: CX20757: BIOS auto-probing.
[ 12.455929] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20757: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 12.455931] snd_hda_codec_conexant hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.455933] snd_hda_codec_conexant hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 12.455935] snd_hda_codec_conexant hdaudioC1D0: mono: mono_out=0x0
[ 12.455938] snd_hda_codec_conexant hdaudioC1D0: inputs:
[ 12.455943] snd_hda_codec_conexant hdaudioC1D0: Mic=0x19
[ 12.455944] snd_hda_codec_conexant hdaudioC1D0: Internal Mic=0x1a
[ 12.455946] snd_hda_codec_conexant hdaudioC1D0: Line=0x18
[ 12.463016] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 12.463164] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 12.463310] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 12.551094] ath: phy0: ASPM enabled: 0x43
[ 12.551100] ath: EEPROM regdomain: 0x60
[ 12.551101] ath: EEPROM indicates we should expect a direct regpair map
[ 12.551104] ath: Country alpha2 being used: 00
[ 12.551105] ath: Regpair used: 0x60
[ 12.552593] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.553140] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffbe82c0680000, irq=17
[ 12.654532] elogind-daemon[1910]: Watching system buttons on /dev/input/event2 (Power Button)
[ 12.654607] elogind-daemon[1910]: Watching system buttons on /dev/input/event1 (Power Button)
[ 12.654745] elogind-daemon[1910]: Watching system buttons on /dev/input/event0 (Lid Switch)
[ 12.802234] [drm] radeon kernel modesetting enabled.
[ 12.802286] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xd0000000 -> 0xdfffffff
[ 12.802288] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0380000 -> 0xf03bffff
[ 12.802290] checking generic (d0000000 420000) vs hw (d0000000 10000000)
[ 12.802291] fb0: switching to radeondrmfb from VESA VGA
[ 12.802669] Console: switching to colour dummy device 80x25
[ 12.802723] radeon 0000:00:01.0: vgaarb: deactivate vga console
[ 12.803097] [drm] initializing kernel modesetting (ARUBA 0x1002:0x990B 0x1002:0x990B 0x00).
[ 12.803174] [drm:radeon_get_bios [radeon]] *ERROR* ACPI VFCT image header truncated
[ 12.803218] ATOM BIOS: 113
[ 12.803271] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 12.803274] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 12.803278] [drm] Detected VRAM RAM=512M, BAR=256M
[ 12.803279] [drm] RAM width 64bits DDR
[ 12.803396] [TTM] Zone kernel: Available graphics memory: 7964502 KiB
[ 12.803397] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 12.803398] [TTM] Initializing pool allocator
[ 12.803403] [TTM] Initializing DMA pool allocator
[ 12.803425] [drm] radeon: 512M of VRAM memory ready
[ 12.803427] [drm] radeon: 1024M of GTT memory ready.
[ 12.803435] [drm] Loading ARUBA Microcode
[ 12.923972] elogind-daemon[1910]: Watching system buttons on /dev/input/event3 (AT Translated Set 2 keyboard)
[ 12.924075] elogind-daemon[1910]: New seat seat0.
[ 13.001394] kvm: Nested Virtualization enabled
[ 13.001398] kvm: Nested Paging enabled
[ 13.100511] MCE: In-kernel MCE decoding enabled.
[ 13.110527] EDAC amd64: Node 0: DRAM ECC disabled.
[ 13.110530] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 13.114262] [drm] Internal thermal controller without fan control
[ 13.114535] [drm] radeon: dpm initialized
[ 13.147988] EDAC amd64: Node 0: DRAM ECC disabled.
[ 13.147992] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 13.177866] EDAC amd64: Node 0: DRAM ECC disabled.
[ 13.177870] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 13.184560] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 13.184604] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 13.210705] EDAC amd64: Node 0: DRAM ECC disabled.
[ 13.210709] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 13.224832] [drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000).
[ 13.224989] radeon 0000:00:01.0: WB enabled
[ 13.224996] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x00000000a2233cd2
[ 13.225376] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x00000000bb5614ad
[ 13.245589] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0x0000000074fdc232
[ 13.245592] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0x00000000af164cf2
[ 13.245594] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x00000000ef6f16ca
[ 13.245596] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x00000000fd668529
[ 13.245597] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x000000006946cc4d
[ 13.245599] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x0000000057a8fef4
[ 13.245601] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 13.245602] [drm] Driver supports precise vblank timestamp query.
[ 13.245604] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 13.245658] radeon 0000:00:01.0: radeon: using MSI.
[ 13.245685] [drm] radeon: irq initialized.
[ 13.264221] [drm] ring test on 0 succeeded in 2 usecs
[ 13.264229] [drm] ring test on 3 succeeded in 4 usecs
[ 13.264234] [drm] ring test on 4 succeeded in 3 usecs
[ 13.310284] [drm] ring test on 5 succeeded in 2 usecs
[ 13.330304] [drm] UVD initialized successfully.
[ 13.440385] [drm] ring test on 6 succeeded in 17 usecs
[ 13.440395] [drm] ring test on 7 succeeded in 3 usecs
[ 13.440396] [drm] VCE initialized successfully.
[ 13.440650] [drm] ib test on ring 0 succeeded in 0 usecs
[ 13.440696] [drm] ib test on ring 3 succeeded in 0 usecs
[ 13.440740] [drm] ib test on ring 4 succeeded in 0 usecs
[ 13.980352] [drm] ib test on ring 5 succeeded
[ 14.513586] [drm] ib test on ring 6 succeeded
[ 14.608855] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.608859] Bluetooth: BNEP filters: protocol multicast
[ 14.608867] Bluetooth: BNEP socket layer initialized
[ 14.630273] NET: Registered protocol family 38
[ 15.020124] [drm] ib test on ring 7 succeeded
[ 15.022062] [drm] radeon atom DIG backlight initialized
[ 15.022065] [drm] Radeon Display Connectors
[ 15.022066] [drm] Connector 0:
[ 15.022067] [drm] eDP-1
[ 15.022068] [drm] HPD1
[ 15.022070] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 15.022071] [drm] Encoders:
[ 15.022073] [drm] LCD1: INTERNAL_UNIPHY2
[ 15.022074] [drm] Connector 1:
[ 15.022075] [drm] VGA-1
[ 15.022076] [drm] HPD2
[ 15.022078] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 15.022079] [drm] Encoders:
[ 15.022079] [drm] CRT1: INTERNAL_UNIPHY2
[ 15.022080] [drm] CRT1: NUTMEG
[ 15.022081] [drm] Connector 2:
[ 15.022082] [drm] HDMI-A-1
[ 15.022083] [drm] HPD3
[ 15.022085] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 15.022086] [drm] Encoders:
[ 15.022087] [drm] DFP1: INTERNAL_UNIPHY
[ 16.185535] wlan0: authenticate with ???
[ 16.194955] wlan0: send auth to ??? (try 1/3)
[ 16.199120] wlan0: authenticated
[ 16.200116] wlan0: associate with ??? (try 1/3)
[ 16.204406] wlan0: RX AssocResp from ??? (capab=0x431 status=0 aid=3)
[ 16.204521] wlan0: associated
[ 16.285758] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 16.292419] [drm] fb mappable at 0xD03E9000
[ 16.292423] [drm] vram apper at 0xD0000000
[ 16.292425] [drm] size 4325376
[ 16.292427] [drm] fb depth is 24
[ 16.292429] [drm] pitch is 5632
[ 16.292587] fbcon: radeondrmfb (fb0) is primary device
[ 18.387421] Console: switching to colour frame buffer device 170x48
[ 18.391145] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 18.426961] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[ 18.427151] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
[ 18.427155] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf003ffff
[ 18.427536] [drm] initializing kernel modesetting (HAINAN 0x1002:0x6665 0x0000:0x0000 0x00).
[ 18.427602] ATOM BIOS: Lenovo
[ 18.427619] [drm] GPU not posted. posting now...
[ 18.431394] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 18.431397] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[ 18.431405] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 18.431407] [drm] RAM width 64bits DDR
[ 18.431425] [drm] radeon: 2048M of VRAM memory ready
[ 18.431427] [drm] radeon: 1024M of GTT memory ready.
[ 18.431442] [drm] Loading hainan Microcode
[ 18.829067] [drm] Internal thermal controller without fan control
[ 18.839408] [drm] radeon: dpm initialized
[ 18.839421] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 18.840855] [drm] PCIE gen 2 link speeds already enabled
[ 18.846322] [drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
[ 18.846445] radeon 0000:01:00.0: WB enabled
[ 18.846450] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000c84e9c51
[ 18.846453] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x000000000cb78e8f
[ 18.846456] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x000000001a167ff6
[ 18.846459] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x0000000096cb94ec
[ 18.846462] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x00000000668a9153
[ 18.846464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 18.846465] [drm] Driver supports precise vblank timestamp query.
[ 18.846467] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 18.846546] radeon 0000:01:00.0: radeon: using MSI.
[ 18.846575] [drm] radeon: irq initialized.
[ 19.063032] [drm] ring test on 0 succeeded in 1 usecs
[ 19.063038] [drm] ring test on 1 succeeded in 1 usecs
[ 19.063042] [drm] ring test on 2 succeeded in 1 usecs
[ 19.063050] [drm] ring test on 3 succeeded in 3 usecs
[ 19.063055] [drm] ring test on 4 succeeded in 3 usecs
[ 19.063315] [drm] ib test on ring 0 succeeded in 0 usecs
[ 19.063342] [drm] ib test on ring 1 succeeded in 0 usecs
[ 19.063368] [drm] ib test on ring 2 succeeded in 0 usecs
[ 19.063408] [drm] ib test on ring 3 succeeded in 0 usecs
[ 19.063431] [drm] ib test on ring 4 succeeded in 0 usecs
[ 19.063762] [drm] Radeon Display Connectors
[ 19.076880] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1
[ 27.095252] [drm] amdgpu kernel modesetting enabled.
[ 27.095345] CRAT table not found
[ 27.095349] Virtual CRAT table created for CPU
[ 27.095350] Parsing CRAT table with 1 nodes
[ 27.095353] Creating topology SYSFS entries
[ 27.095367] Topology: Add CPU node
[ 27.095368] Finished initializing topology
[ 31.102203] elogind-daemon[1910]: New session c1 of user sddm.
[ 43.655553] elogind-daemon[1910]: New session 1 of user owner.
[ 43.695592] elogind-daemon[1910]: Removed session c1.
[ 51.271672] Bluetooth: RFCOMM TTY layer initialized
[ 51.271680] Bluetooth: RFCOMM socket layer initialized
[ 51.271688] Bluetooth: RFCOMM ver 1.11
[ 52.425882] fuse: init (API version 7.31)
[ 458.324369] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 458.339700] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.