blob: acede22060556578ccbbf71053b2ab9c30d81705 [file] [log] [blame]
[ 0.000000] Linux version 5.7.0-kali1-amd64 (devel@kali.org) (gcc version 9.3.0 (Debian 9.3.0-14), GNU ld (GNU Binutils for Debian) 2.34) #1 SMP Debian 5.7.6-1kali2 (2020-07-01)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.7.0-kali1-amd64 root=/dev/mapper/NB1--vg-root ro initrd=/install/gtk/initrd.gz quiet iomem=relaxed splash
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff2afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff2b000-0x00000000c29fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013c5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: Google Stout/Stout, BIOS 4.12-2069-gbc9757ff17 08/10/2020
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1496.523 MHz processor
[ 0.003610] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.003612] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.003618] last_pfn = 0x13c600 max_arch_pfn = 0x400000000
[ 0.003625] MTRR default type: write-back
[ 0.003626] MTRR fixed ranges enabled:
[ 0.003628] 00000-9FFFF write-back
[ 0.003629] A0000-BFFFF uncachable
[ 0.003631] C0000-FFFFF write-back
[ 0.003632] MTRR variable ranges enabled:
[ 0.003634] 0 base 0C0000000 mask FF0000000 uncachable
[ 0.003636] 1 base 0D0000000 mask FF0000000 write-combining
[ 0.003638] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.003639] 3 disabled
[ 0.003639] 4 disabled
[ 0.003640] 5 disabled
[ 0.003641] 6 disabled
[ 0.003642] 7 disabled
[ 0.003642] 8 disabled
[ 0.003643] 9 disabled
[ 0.004061] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.004215] last_pfn = 0xbff2b max_arch_pfn = 0x400000000
[ 0.022753] RAMDISK: [mem 0x2f583000-0x33ab8fff]
[ 0.022762] ACPI: Early table checksum verification disabled
[ 0.022766] ACPI: RSDP 0x00000000000F6750 000024 (v02 COREv4)
[ 0.022771] ACPI: XSDT 0x00000000BFF4F0E0 000054 (v01 COREv4 COREBOOT 00000000 CORE 20200528)
[ 0.022780] ACPI: FACP 0x00000000BFF52340 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200528)
[ 0.022788] ACPI: DSDT 0x00000000BFF4F280 0030B5 (v02 COREv4 COREBOOT 20110725 INTL 20200528)
[ 0.022793] ACPI: FACS 0x00000000BFF4F240 000040
[ 0.022797] ACPI: FACS 0x00000000BFF4F240 000040
[ 0.022800] ACPI: SSDT 0x00000000BFF52460 000ECC (v02 COREv4 COREBOOT 0000002A CORE 20200528)
[ 0.022805] ACPI: MCFG 0x00000000BFF53330 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200528)
[ 0.022809] ACPI: TCPA 0x00000000BFF53370 000032 (v02 COREv4 COREBOOT 00000000 CORE 20200528)
[ 0.022814] ACPI: APIC 0x00000000BFF533B0 00005C (v03 COREv4 COREBOOT 00000000 CORE 20200528)
[ 0.022818] ACPI: HPET 0x00000000BFF53410 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200528)
[ 0.022830] ACPI: Local APIC address 0xfee00000
[ 0.022953] No NUMA configuration found
[ 0.022954] Faking a node at [mem 0x0000000000000000-0x000000013c5fffff]
[ 0.022960] NODE_DATA(0) allocated [mem 0x13c5fb000-0x13c5fffff]
[ 0.022999] Zone ranges:
[ 0.023001] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.023002] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.023004] Normal [mem 0x0000000100000000-0x000000013c5fffff]
[ 0.023005] Device empty
[ 0.023007] Movable zone start for each node
[ 0.023008] Early memory node ranges
[ 0.023009] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.023011] node 0: [mem 0x0000000000100000-0x00000000bff2afff]
[ 0.023012] node 0: [mem 0x0000000100000000-0x000000013c5fffff]
[ 0.023277] Zeroed struct page in unavailable ranges: 15159 pages
[ 0.023279] Initmem setup node 0 [mem 0x0000000000001000-0x000000013c5fffff]
[ 0.023281] On node 0 totalpages: 1033417
[ 0.023283] DMA zone: 64 pages used for memmap
[ 0.023284] DMA zone: 21 pages reserved
[ 0.023285] DMA zone: 3998 pages, LIFO batch:0
[ 0.023409] DMA32 zone: 12221 pages used for memmap
[ 0.023410] DMA32 zone: 782123 pages, LIFO batch:63
[ 0.046379] Normal zone: 3864 pages used for memmap
[ 0.046382] Normal zone: 247296 pages, LIFO batch:63
[ 0.047389] Reserving Intel graphics memory at [mem 0xc0a00000-0xc29fffff]
[ 0.047654] ACPI: PM-Timer IO Port: 0x508
[ 0.047657] ACPI: Local APIC address 0xfee00000
[ 0.047678] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.047682] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.047684] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.047687] ACPI: IRQ0 used by override.
[ 0.047688] ACPI: IRQ9 used by override.
[ 0.047691] Using ACPI (MADT) for SMP configuration information
[ 0.047693] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.047699] TSC deadline timer available
[ 0.047701] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.047716] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.047718] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.047719] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.047720] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.047722] PM: hibernation: Registered nosave memory: [mem 0xbff2b000-0xc29fffff]
[ 0.047723] PM: hibernation: Registered nosave memory: [mem 0xc2a00000-0xefffffff]
[ 0.047724] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.047725] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[ 0.047726] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.047727] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xffffffff]
[ 0.047729] [mem 0xc2a00000-0xefffffff] available for PCI devices
[ 0.047731] Booting paravirtualized kernel on bare hardware
[ 0.047735] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.054090] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.054416] percpu: Embedded 55 pages/cpu s188056 r8192 d29032 u1048576
[ 0.054423] pcpu-alloc: s188056 r8192 d29032 u1048576 alloc=1*2097152
[ 0.054424] pcpu-alloc: [0] 0 1
[ 0.054453] Built 1 zonelists, mobility grouping on. Total pages: 1017247
[ 0.054454] Policy zone: Normal
[ 0.054456] Kernel command line: BOOT_IMAGE=/vmlinuz-5.7.0-kali1-amd64 root=/dev/mapper/NB1--vg-root ro initrd=/install/gtk/initrd.gz quiet iomem=relaxed splash
[ 0.055035] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.055252] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.055306] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.082552] Memory: 3139064K/4133668K available (10243K kernel code, 1283K rwdata, 4004K rodata, 1628K init, 1936K bss, 233708K reserved, 0K cma-reserved)
[ 0.082564] random: get_random_u64 called from __kmem_cache_create+0x3e/0x530 with crng_init=0
[ 0.082739] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.082758] Kernel/User page tables isolation: enabled
[ 0.082780] ftrace: allocating 34972 entries in 137 pages
[ 0.104258] ftrace: allocated 137 pages with 3 groups
[ 0.104379] rcu: Hierarchical RCU implementation.
[ 0.104381] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.104382] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.104383] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.110584] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16
[ 0.112688] Console: colour VGA+ 80x25
[ 0.112692] printk: console [tty0] enabled
[ 0.112716] ACPI: Core revision 20200326
[ 0.112809] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.112827] APIC: Switch to symmetric I/O mode setup
[ 0.112900] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.113342] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.132829] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x15924e1d4a4, max_idle_ns: 440795255458 ns
[ 0.132835] Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.04 BogoMIPS (lpj=5986092)
[ 0.132838] pid_max: default: 32768 minimum: 301
[ 0.132880] LSM: Security Framework initializing
[ 0.132889] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.132917] AppArmor: AppArmor initialized
[ 0.132919] TOMOYO Linux initialized
[ 0.132953] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.132968] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.133347] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.133363] process: using mwait in idle threads
[ 0.133368] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.133369] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.133373] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.133375] Spectre V2 : Mitigation: Full generic retpoline
[ 0.133376] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.133377] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.133379] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.133381] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.133386] MDS: Mitigation: Clear CPU buffers
[ 0.133645] Freeing SMP alternatives memory: 32K
[ 0.136323] smpboot: CPU0: Intel(R) Celeron(R) CPU 1007U @ 1.50GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.136485] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.136494] ... version: 3
[ 0.136495] ... bit width: 48
[ 0.136496] ... generic registers: 8
[ 0.136497] ... value mask: 0000ffffffffffff
[ 0.136498] ... max period: 00007fffffffffff
[ 0.136498] ... fixed-purpose events: 3
[ 0.136499] ... event mask: 00000007000000ff
[ 0.136557] rcu: Hierarchical SRCU implementation.
[ 0.136831] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.136831] smp: Bringing up secondary CPUs ...
[ 0.136831] x86: Booting SMP configuration:
[ 0.136831] .... node #0, CPUs: #1
[ 0.136911] smp: Brought up 1 node, 2 CPUs
[ 0.136911] smpboot: Max logical packages: 1
[ 0.136911] smpboot: Total of 2 processors activated (5986.09 BogoMIPS)
[ 0.142754] node 0 initialised, 190224 pages in 4ms
[ 0.142807] devtmpfs: initialized
[ 0.142807] x86/mm: Memory block size: 128MB
[ 0.142807] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.142807] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.142807] pinctrl core: initialized pinctrl subsystem
[ 0.142807] thermal_sys: Registered thermal governor 'fair_share'
[ 0.142807] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.142807] thermal_sys: Registered thermal governor 'step_wise'
[ 0.142807] thermal_sys: Registered thermal governor 'user_space'
[ 0.142807] NET: Registered protocol family 16
[ 0.142807] audit: initializing netlink subsys (disabled)
[ 0.142807] audit: type=2000 audit(1597077139.028:1): state=initialized audit_enabled=0 res=1
[ 0.142807] cpuidle: using governor ladder
[ 0.142807] cpuidle: using governor menu
[ 0.142807] ACPI: bus type PCI registered
[ 0.142807] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.144892] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.144895] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.144909] PCI: Using configuration type 1 for base access
[ 0.144994] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.146325] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.429138] ACPI: Added _OSI(Module Device)
[ 0.429138] ACPI: Added _OSI(Processor Device)
[ 0.429138] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.429138] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.429138] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.429138] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.429138] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.431748] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.433705] ACPI: EC: EC started
[ 0.433706] ACPI: EC: interrupt blocked
[ 0.435131] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.435135] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.435136] ACPI: Interpreter enabled
[ 0.435164] ACPI: (supports S0 S3 S4 S5)
[ 0.435166] ACPI: Using IOAPIC for interrupt routing
[ 0.435197] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.442130] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.442138] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.442208] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.442222] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.442297] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cefff])
[ 0.442524] PCI host bridge to bus 0000:00
[ 0.442528] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.442530] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.442531] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.442533] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.442535] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.442537] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.442538] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.442540] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.442542] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.442543] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.442545] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.442547] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.442548] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.442550] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.442552] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.442554] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xefffffff window]
[ 0.442555] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.442558] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.442570] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.442723] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.442779] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.442912] pci 0000:00:02.0: [8086:0156] type 00 class 0x030000
[ 0.442930] pci 0000:00:02.0: reg 0x10: [mem 0xc2c00000-0xc2ffffff 64bit]
[ 0.442939] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.442945] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
[ 0.443073] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.443088] pci 0000:00:04.0: reg 0x10: [mem 0xc3110000-0xc3117fff 64bit]
[ 0.443246] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.443282] pci 0000:00:14.0: reg 0x10: [mem 0xc3100000-0xc310ffff 64bit]
[ 0.443387] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.443539] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.443645] pci 0000:00:16.0: reg 0x10: [mem 0xc3120000-0xc312000f 64bit]
[ 0.444001] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.444170] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.444204] pci 0000:00:1a.0: reg 0x10: [mem 0xc311d000-0xc311d3ff]
[ 0.444327] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.444459] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.444495] pci 0000:00:1b.0: reg 0x10: [mem 0xc3118000-0xc311bfff 64bit]
[ 0.444617] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.444750] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.444884] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.445024] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.445164] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.445300] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.445438] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.445575] pci 0000:00:1c.3: [8086:1e1a] type 01 class 0x060400
[ 0.445706] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.445847] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.445881] pci 0000:00:1d.0: reg 0x10: [mem 0xc311e000-0xc311e3ff]
[ 0.446002] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.446129] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.446383] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.446415] pci 0000:00:1f.2: reg 0x10: [io 0x1060-0x1067]
[ 0.446429] pci 0000:00:1f.2: reg 0x14: [io 0x1070-0x1073]
[ 0.446443] pci 0000:00:1f.2: reg 0x18: [io 0x1068-0x106f]
[ 0.446456] pci 0000:00:1f.2: reg 0x1c: [io 0x1074-0x1077]
[ 0.446470] pci 0000:00:1f.2: reg 0x20: [io 0x1040-0x105f]
[ 0.446484] pci 0000:00:1f.2: reg 0x24: [mem 0xc311c000-0xc311c7ff]
[ 0.446548] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.446668] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.446702] pci 0000:00:1f.3: reg 0x10: [mem 0xc311f000-0xc311f0ff 64bit]
[ 0.446738] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.446921] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.446984] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.447090] pci 0000:03:00.0: [168c:0034] type 00 class 0x028000
[ 0.447179] pci 0000:03:00.0: reg 0x10: [mem 0xc2a00000-0xc2a7ffff 64bit]
[ 0.447295] pci 0000:03:00.0: reg 0x30: [mem 0xc2a80000-0xc2a8ffff pref]
[ 0.447477] pci 0000:03:00.0: supports D1 D2
[ 0.447479] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.447713] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.447721] pci 0000:00:1c.1: bridge window [mem 0xc2a00000-0xc2afffff]
[ 0.447858] pci 0000:04:00.0: [10ec:5209] type 00 class 0xff0000
[ 0.447989] pci 0000:04:00.0: reg 0x10: [mem 0xc2b00000-0xc2b00fff]
[ 0.448612] pci 0000:04:00.0: supports D1 D2
[ 0.448614] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[ 0.448982] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.448991] pci 0000:00:1c.2: bridge window [mem 0xc2b00000-0xc2bfffff]
[ 0.449078] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.449120] pci 0000:05:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.449163] pci 0000:05:00.0: reg 0x18: [mem 0xc3004000-0xc3004fff 64bit pref]
[ 0.449190] pci 0000:05:00.0: reg 0x20: [mem 0xc3000000-0xc3003fff 64bit pref]
[ 0.449334] pci 0000:05:00.0: supports D1 D2
[ 0.449335] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.449510] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.449515] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.449525] pci 0000:00:1c.3: bridge window [mem 0xc3000000-0xc30fffff 64bit pref]
[ 0.449786] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.449856] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.449922] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.449987] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.450051] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.450118] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.450182] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.450246] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.451109] ACPI: EC: interrupt unblocked
[ 0.451111] ACPI: EC: event unblocked
[ 0.451117] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.451118] ACPI: EC: GPE=0x16
[ 0.451121] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[ 0.451122] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[ 0.451203] iommu: Default domain type: Translated
[ 0.451223] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.451223] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.451223] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.451223] vgaarb: loaded
[ 0.451223] EDAC MC: Ver: 3.0.0
[ 0.451223] PCI: Using ACPI for IRQ routing
[ 0.453436] PCI: pci_cache_line_size set to 64 bytes
[ 0.453545] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.453547] e820: reserve RAM buffer [mem 0xbff2b000-0xbfffffff]
[ 0.453548] e820: reserve RAM buffer [mem 0x13c600000-0x13fffffff]
[ 0.453713] NetLabel: Initializing
[ 0.453714] NetLabel: domain hash size = 128
[ 0.453715] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.453736] NetLabel: unlabeled traffic allowed by default
[ 0.454710] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.454717] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.456753] clocksource: Switched to clocksource tsc-early
[ 0.469801] VFS: Disk quotas dquot_6.6.0
[ 0.469824] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.469995] AppArmor: AppArmor Filesystem Enabled
[ 0.470020] pnp: PnP ACPI init
[ 0.470297] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.470300] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.470302] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.470304] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.470306] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.470308] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.470310] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.470312] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.470314] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.470317] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.470325] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.470889] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.470896] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.470950] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.470952] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.470957] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.470986] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.471033] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.471072] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.471108] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.471142] pnp: PnP ACPI: found 7 devices
[ 0.477611] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.477675] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.477684] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.477704] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.477712] pci 0000:00:1c.1: bridge window [mem 0xc2a00000-0xc2afffff]
[ 0.477726] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.477734] pci 0000:00:1c.2: bridge window [mem 0xc2b00000-0xc2bfffff]
[ 0.477748] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.477752] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.477764] pci 0000:00:1c.3: bridge window [mem 0xc3000000-0xc30fffff 64bit pref]
[ 0.477775] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.477777] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.477779] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.477781] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.477782] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.477784] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.477786] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.477788] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.477789] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.477791] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.477793] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.477794] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.477796] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.477798] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.477800] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.477802] pci_bus 0000:00: resource 19 [mem 0xc2a00000-0xefffffff window]
[ 0.477803] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.477806] pci_bus 0000:03: resource 1 [mem 0xc2a00000-0xc2afffff]
[ 0.477808] pci_bus 0000:04: resource 1 [mem 0xc2b00000-0xc2bfffff]
[ 0.477810] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.477812] pci_bus 0000:05: resource 2 [mem 0xc3000000-0xc30fffff 64bit pref]
[ 0.477923] NET: Registered protocol family 2
[ 0.478123] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.478134] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.478206] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.478310] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.478350] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.478365] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.478474] NET: Registered protocol family 1
[ 0.478484] NET: Registered protocol family 44
[ 0.478503] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.479225] PCI: CLS 64 bytes, default 64
[ 0.479290] Trying to unpack rootfs image as initramfs...
[ 2.202155] Freeing initrd memory: 70872K
[ 2.202192] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.202195] software IO TLB: mapped [mem 0xbbf2b000-0xbff2b000] (64MB)
[ 2.202783] Initialise system trusted keyrings
[ 2.202797] Key type blacklist registered
[ 2.202869] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 2.204778] zbud: loaded
[ 2.205031] integrity: Platform Keyring initialized
[ 2.205035] Key type asymmetric registered
[ 2.205036] Asymmetric key parser 'x509' registered
[ 2.205046] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 2.205108] io scheduler mq-deadline registered
[ 2.205435] pcieport 0000:00:01.0: PME: Signaling with IRQ 24
[ 2.205611] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
[ 2.205899] pcieport 0000:00:1c.1: PME: Signaling with IRQ 26
[ 2.206169] pcieport 0000:00:1c.2: PME: Signaling with IRQ 27
[ 2.206434] pcieport 0000:00:1c.3: PME: Signaling with IRQ 28
[ 2.206569] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.206587] intel_idle: MWAIT substates: 0x21120
[ 2.206588] intel_idle: v0.5.1 model 0x3A
[ 2.206746] intel_idle: Local APIC timer is reliable in all C-states
[ 2.211778] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.211780] ACPI: Thermal Zone [THRM] (40 C)
[ 2.211958] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.212908] Linux agpgart interface v0.103
[ 2.212962] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 2.212963] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 2.213197] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.218957] i8042: Detected active multiplexing controller, rev 1.1
[ 2.221516] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.221522] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.221561] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.221590] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.221617] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.221825] mousedev: PS/2 mouse device common for all mice
[ 2.221881] rtc_cmos 00:03: RTC can wake from S4
[ 2.222147] rtc_cmos 00:03: registered as rtc0
[ 2.222202] rtc_cmos 00:03: setting system clock to 2020-08-10T16:32:21 UTC (1597077141)
[ 2.222227] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.222240] intel_pstate: Intel P-state driver initializing
[ 2.222456] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.223091] NET: Registered protocol family 10
[ 2.245371] Segment Routing with IPv6
[ 2.245424] mip6: Mobile IPv6
[ 2.245427] NET: Registered protocol family 17
[ 2.245473] mpls_gso: MPLS GSO support
[ 2.245853] microcode: sig=0x306a9, pf=0x10, revision=0x21
[ 2.245865] microcode: Microcode Update Driver: v2.2.
[ 2.245884] IPI shorthand broadcast: enabled
[ 2.245894] sched_clock: Marking stable (2243549996, 2039688)->(2253612957, -8023273)
[ 2.246015] registered taskstats version 1
[ 2.246017] Loading compiled-in X.509 certificates
[ 2.264038] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.314064] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 2.314090] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 2.314116] zswap: loaded using pool lzo/zbud
[ 2.314382] Key type ._fscrypt registered
[ 2.314384] Key type .fscrypt registered
[ 2.314385] Key type fscrypt-provisioning registered
[ 2.314468] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.317879] Freeing unused kernel image (initmem) memory: 1628K
[ 2.336920] Write protecting the kernel read-only data: 16384k
[ 2.338004] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 2.338207] Freeing unused kernel image (rodata/data gap) memory: 92K
[ 2.436845] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.436846] x86/mm: Checking user space page tables
[ 2.530723] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.530727] Run /init as init process
[ 2.530729] with arguments:
[ 2.530730] /init
[ 2.530731] splash
[ 2.530732] with environment:
[ 2.530733] HOME=/
[ 2.530734] TERM=linux
[ 2.530735] BOOT_IMAGE=/vmlinuz-5.7.0-kali1-amd64
[ 2.789206] button: module verification failed: signature and/or required key missing - tainting kernel
[ 2.789589] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[ 2.789659] ACPI: Lid Switch [LID0]
[ 2.789753] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 2.789800] ACPI: Power Button [PWRF]
[ 2.819769] ACPI: bus type USB registered
[ 2.819799] usbcore: registered new interface driver usbfs
[ 2.819810] usbcore: registered new interface driver hub
[ 2.819839] usbcore: registered new device driver usb
[ 2.841521] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.842283] ehci-pci: EHCI PCI platform driver
[ 2.842613] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.842626] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.842710] ehci-pci 0000:00:1a.0: debug port 2
[ 2.844947] random: fast init done
[ 2.846624] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.855788] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.856466] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20200326/utaddress-204)
[ 2.856474] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.856476] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200326/utaddress-204)
[ 2.856481] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.856481] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200326/utaddress-204)
[ 2.856485] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.856486] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200326/utaddress-204)
[ 2.856489] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.856490] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.857739] SCSI subsystem initialized
[ 2.868826] ehci-pci 0000:00:1a.0: irq 21, io mem 0xc311d000
[ 2.877462] cryptd: max_cpu_qlen set to 1000
[ 2.882963] libata version 3.00 loaded.
[ 2.885031] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.885188] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
[ 2.885190] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.885192] usb usb1: Product: EHCI Host Controller
[ 2.885194] usb usb1: Manufacturer: Linux 5.7.0-kali1-amd64 ehci_hcd
[ 2.885196] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.885554] hub 1-0:1.0: USB hub found
[ 2.885567] hub 1-0:1.0: 3 ports detected
[ 2.885956] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.885965] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.887036] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[ 2.887043] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.887541] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
[ 2.887543] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.887545] usb usb2: Product: xHCI Host Controller
[ 2.887547] usb usb2: Manufacturer: Linux 5.7.0-kali1-amd64 xhci-hcd
[ 2.887548] usb usb2: SerialNumber: 0000:00:14.0
[ 2.887691] hub 2-0:1.0: USB hub found
[ 2.887706] hub 2-0:1.0: 4 ports detected
[ 2.887935] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.887941] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 2.887945] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 2.887969] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.888032] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
[ 2.888034] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.888035] usb usb3: Product: xHCI Host Controller
[ 2.888037] usb usb3: Manufacturer: Linux 5.7.0-kali1-amd64 xhci-hcd
[ 2.888038] usb usb3: SerialNumber: 0000:00:14.0
[ 2.888162] hub 3-0:1.0: USB hub found
[ 2.888176] hub 3-0:1.0: 4 ports detected
[ 2.888625] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 2.888643] ehci-pci 0000:00:1d.0: debug port 2
[ 2.892560] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.893171] libphy: r8169: probed
[ 2.893516] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl, 2c:60:0c:3c:60:76, XID 2c9, IRQ 30
[ 2.893519] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.893978] ehci-pci 0000:00:1d.0: irq 19, io mem 0xc311e000
[ 2.897046] ahci 0000:00:1f.2: version 3.0
[ 2.897276] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.897303] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
[ 2.897306] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 2.944712] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.944806] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
[ 2.944809] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.944811] usb usb4: Product: EHCI Host Controller
[ 2.944813] usb usb4: Manufacturer: Linux 5.7.0-kali1-amd64 ehci_hcd
[ 2.944814] usb usb4: SerialNumber: 0000:00:1d.0
[ 2.945646] hub 4-0:1.0: USB hub found
[ 2.945658] hub 4-0:1.0: 3 ports detected
[ 2.948335] scsi host0: ahci
[ 2.948697] scsi host1: ahci
[ 2.956784] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.958019] Console: switching to colour dummy device 80x25
[ 2.960633] scsi host2: ahci
[ 2.960819] scsi host3: ahci
[ 2.961013] scsi host4: ahci
[ 2.961150] scsi host5: ahci
[ 2.961219] ata1: SATA max UDMA/133 abar m2048@0xc311c000 port 0xc311c100 irq 32
[ 2.961222] ata2: SATA max UDMA/133 abar m2048@0xc311c000 port 0xc311c180 irq 32
[ 2.961224] ata3: DUMMY
[ 2.961225] ata4: DUMMY
[ 2.961226] ata5: DUMMY
[ 2.961227] ata6: DUMMY
[ 3.008898] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.009820] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.033298] [drm] Initialized i915 1.6.0 20200313 for 0000:00:02.0 on minor 0
[ 3.033669] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.053135] battery: ACPI: Battery Slot [BATX] (battery present)
[ 3.058990] acpi device:2c: registered as cooling_device2
[ 3.059168] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 3.073197] fbcon: i915drmfb (fb0) is primary device
[ 3.217102] tsc: Refined TSC clocksource calibration: 1496.599 MHz
[ 3.217116] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159295cdaa3, max_idle_ns: 440795208494 ns
[ 3.217171] clocksource: Switched to clocksource tsc
[ 3.220922] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.276257] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.280927] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 3.377658] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 3.377663] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.378625] hub 1-1:1.0: USB hub found
[ 3.379024] hub 1-1:1.0: 6 ports detected
[ 3.437314] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 3.437320] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.438272] hub 4-1:1.0: USB hub found
[ 3.438663] hub 4-1:1.0: 8 ports detected
[ 3.596200] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.598270] ata2.00: supports DRM functions and may not be fully accessible
[ 3.607350] ata2.00: disabling queued TRIM support
[ 3.607355] ata2.00: ATA-9: Crucial_CT256M550SSD3, MU01, max UDMA/133
[ 3.607359] ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 3.627850] ata2.00: supports DRM functions and may not be fully accessible
[ 3.635843] ata2.00: disabling queued TRIM support
[ 3.653370] ata2.00: configured for UDMA/133
[ 3.663931] scsi 1:0:0:0: Direct-Access ATA Crucial_CT256M55 MU01 PQ: 0 ANSI: 5
[ 3.728926] usb 4-1.4: new high-speed USB device number 3 using ehci-pci
[ 3.848767] usb 4-1.4: New USB device found, idVendor=5986, idProduct=0299, bcdDevice= 0.10
[ 3.848772] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.848776] usb 4-1.4: Product: Integrated Camera
[ 3.848779] usb 4-1.4: Manufacturer: Vimicro corp.
[ 3.851005] Console: switching to colour frame buffer device 170x48
[ 3.875114] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 3.911946] ata2.00: Enabling discard_zeroes_data
[ 3.912015] sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 3.912018] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 3.912030] sd 1:0:0:0: [sda] Write Protect is off
[ 3.912033] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.912051] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.925381] psmouse serio4: synaptics: queried max coordinates: x [..5766], y [..5260]
[ 3.932936] usb 4-1.5: new full-speed USB device number 4 using ehci-pci
[ 3.933437] ata2.00: Enabling discard_zeroes_data
[ 3.936711] sda: sda1 sda2 < sda5 >
[ 3.937961] ata2.00: Enabling discard_zeroes_data
[ 3.938571] sd 1:0:0:0: [sda] supports TCG Opal
[ 3.938577] sd 1:0:0:0: [sda] Attached SCSI disk
[ 3.995559] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x123c00/0x0, board id: 1917, fw id: 864720
[ 3.995574] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[ 4.036512] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 4.042505] usb 4-1.5: string descriptor 0 read error: -22
[ 4.042512] usb 4-1.5: New USB device found, idVendor=0cf3, idProduct=3004, bcdDevice= 0.01
[ 4.042514] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.119558] random: lvm: uninitialized urandom read (4 bytes read)
[ 4.194961] device-mapper: uevent: version 1.0.3
[ 4.195077] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[ 4.256611] random: plymouthd: uninitialized urandom read (8 bytes read)
[ 4.256987] random: plymouthd: uninitialized urandom read (8 bytes read)
[ 4.738396] psmouse serio5: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 4.974799] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input13
[ 8.768711] random: crng init done
[ 12.234177] process '/usr/bin/fstype' started with executable stack
[ 12.544114] PM: Image not found (code -22)
[ 12.683126] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 12.820739] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 13.176271] systemd[1]: Inserted module 'autofs4'
[ 13.219326] systemd[1]: systemd 245.6-2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 13.237122] systemd[1]: Detected architecture x86-64.
[ 13.255800] systemd[1]: Set hostname to <NB1>.
[ 13.653120] systemd[1]: Created slice system-getty.slice.
[ 13.653638] systemd[1]: Created slice system-modprobe.slice.
[ 13.654056] systemd[1]: Created slice Cryptsetup Units Slice.
[ 13.654562] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 13.654957] systemd[1]: Created slice User and Session Slice.
[ 13.655078] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 13.655435] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 13.655534] systemd[1]: Reached target Remote File Systems.
[ 13.655559] systemd[1]: Reached target Slices.
[ 13.655703] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 13.655913] systemd[1]: Listening on LVM2 poll daemon socket.
[ 13.666487] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 13.666806] systemd[1]: Listening on Syslog Socket.
[ 13.667138] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 13.667333] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 13.667840] systemd[1]: Listening on Journal Audit Socket.
[ 13.668108] systemd[1]: Listening on Journal Socket (/dev/log).
[ 13.668426] systemd[1]: Listening on Journal Socket.
[ 13.668740] systemd[1]: Listening on udev Control Socket.
[ 13.669004] systemd[1]: Listening on udev Kernel Socket.
[ 13.670771] systemd[1]: Mounting Huge Pages File System...
[ 13.672663] systemd[1]: Mounting POSIX Message Queue File System...
[ 13.675596] systemd[1]: Mounting Kernel Debug File System...
[ 13.677809] systemd[1]: Mounting Kernel Trace File System...
[ 13.680071] systemd[1]: Starting Set the console keyboard layout...
[ 13.681908] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 13.681998] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 13.686027] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 13.686104] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 13.691758] systemd[1]: Starting Journal Service...
[ 13.703542] systemd[1]: Starting Load Kernel Modules...
[ 13.708310] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 13.711097] systemd[1]: Starting udev Coldplug all Devices...
[ 13.713963] systemd[1]: Mounted Huge Pages File System.
[ 13.714263] systemd[1]: Mounted POSIX Message Queue File System.
[ 13.714510] systemd[1]: Mounted Kernel Debug File System.
[ 13.726803] systemd[1]: Mounted Kernel Trace File System.
[ 13.728949] systemd[1]: Finished Set the console keyboard layout.
[ 13.747570] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 13.748604] systemd[1]: Finished Load Kernel Modules.
[ 13.749173] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 13.749308] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 13.750743] systemd[1]: Starting Apply Kernel Variables...
[ 13.777412] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 13.780476] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 13.785785] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 13.785864] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 13.787219] systemd[1]: Starting Load/Save Random Seed...
[ 13.788746] systemd[1]: Starting Create System Users...
[ 13.792288] systemd[1]: Finished Apply Kernel Variables.
[ 13.847817] systemd[1]: Finished Load/Save Random Seed.
[ 13.852564] systemd[1]: Finished Create System Users.
[ 13.854286] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 13.902704] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 13.902987] systemd[1]: Reached target Local File Systems (Pre).
[ 13.905400] systemd[1]: Starting udev Kernel Device Manager...
[ 13.926170] systemd[1]: Finished udev Coldplug all Devices.
[ 13.928736] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[ 13.954146] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[ 14.059285] systemd[1]: Started udev Kernel Device Manager.
[ 14.060807] systemd[1]: Starting Show Plymouth Boot Screen...
[ 14.156254] systemd[1]: Started Show Plymouth Boot Screen.
[ 14.156534] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 14.156718] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 14.156764] systemd[1]: Reached target Paths.
[ 14.290917] ACPI: AC Adapter [AC] (off-line)
[ 14.348080] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 14.358069] systemd[1]: Created slice system-systemd\x2dbacklight.slice.
[ 14.359614] systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:acpi_video0...
[ 14.468041] systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:intel_backlight...
[ 14.535854] systemd[1]: Finished Load/Save Screen Backlight Brightness of backlight:intel_backlight.
[ 14.541899] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 14.555434] iTCO_vendor_support: vendor-support=0
[ 14.580402] input: PC Speaker as /devices/platform/pcspkr/input/input14
[ 14.581607] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 14.581661] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 14.581799] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.606470] systemd[1]: Finished Load/Save Screen Backlight Brightness of backlight:acpi_video0.
[ 14.622716] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 14.640930] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 14.640932] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 14.640933] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 14.640934] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 14.727217] mc: Linux media interface: v0.10
[ 14.793173] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 14.793593] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 14.793987] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 14.794379] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 14.805976] videodev: Linux video capture interface: v2.00
[ 14.834251] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 14.834254] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 14.834256] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 14.834258] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 14.834259] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 14.834261] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 14.834263] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 14.881788] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 14.955192] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 14.955269] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 14.955338] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 14.955405] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 15.008396] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ 15.014183] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 15.052831] systemd[1]: Reached target Sound Card.
[ 15.067788] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 15.133779] Bluetooth: Core ver 2.22
[ 15.133819] NET: Registered protocol family 31
[ 15.133820] Bluetooth: HCI device and connection manager initialized
[ 15.133980] Bluetooth: HCI socket layer initialized
[ 15.133983] Bluetooth: L2CAP socket layer initialized
[ 15.133989] Bluetooth: SCO socket layer initialized
[ 15.135176] systemd[1]: Created slice system-lvm2\x2dpvscan.slice.
[ 15.157086] systemd[1]: Starting LVM event activation on device 254:0...
[ 15.180089] ath: phy0: ASPM enabled: 0x43
[ 15.180093] ath: EEPROM regdomain: 0x6a
[ 15.180093] ath: EEPROM indicates we should expect a direct regpair map
[ 15.180095] ath: Country alpha2 being used: 00
[ 15.180096] ath: Regpair used: 0x6a
[ 15.213389] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0299)
[ 15.216957] uvcvideo 4-1.4:1.0: Entity type for entity Processing 2 was not initialized!
[ 15.216961] uvcvideo 4-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[ 15.216963] uvcvideo 4-1.4:1.0: Entity type for entity Extension 4 was not initialized!
[ 15.217081] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.0/input/input19
[ 15.217185] usbcore: registered new interface driver uvcvideo
[ 15.217187] USB Video Class driver (1.1.1)
[ 15.219668] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.236945] systemd[1]: Starting Load/Save RF Kill Switch Status...
[ 15.237824] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffb1cc00480000, irq=17
[ 15.248652] intel_rapl_common: Found RAPL domain package
[ 15.248655] intel_rapl_common: Found RAPL domain core
[ 15.248656] intel_rapl_common: Found RAPL domain uncore
[ 15.274255] usbcore: registered new interface driver btusb
[ 15.279890] systemd[1]: Found device /dev/mapper/NB1--vg-swap_1.
[ 15.281355] systemd[1]: Activating swap /dev/mapper/NB1--vg-swap_1...
[ 15.307846] usb 4-1.5: firmware: direct-loading firmware ar3k/AthrBT_0x11020000.dfu
[ 15.319248] systemd[1]: Started Load/Save RF Kill Switch Status.
[ 15.340942] Adding 4128764k swap on /dev/mapper/NB1--vg-swap_1. Priority:-2 extents:1 across:4128764k SSFS
[ 15.346227] systemd[1]: Activated swap /dev/mapper/NB1--vg-swap_1.
[ 15.347264] systemd[1]: Reached target Swap.
[ 15.349059] usb 4-1.5: firmware: direct-loading firmware ar3k/ramps_0x11020000_40.dfu
[ 15.352778] usbcore: registered new interface driver ath3k
[ 15.375103] systemd[1]: Finished LVM event activation on device 254:0.
[ 15.399064] usb 4-1.5: USB disconnect, device number 4
[ 15.449091] systemd[1]: Found device Crucial_CT256M550SSD3 5.
[ 15.465125] systemd[1]: Found device Crucial_CT256M550SSD3 1.
[ 15.466693] systemd[1]: Starting Cryptography Setup for sda5_crypt...
[ 15.468192] systemd[1]: Starting File System Check on /dev/disk/by-uuid/80b9e493-6bcc-4aae-b581-2a4d89121d1d...
[ 15.484225] systemd[1]: Started File System Check Daemon to report status.
[ 15.503537] systemd[1]: Finished Cryptography Setup for sda5_crypt.
[ 15.503843] systemd[1]: Reached target Block Device Preparation for /dev/mapper/sda5_crypt.
[ 15.503870] systemd[1]: Reached target Local Encrypted Volumes.
[ 15.527071] systemd[1]: Started Journal Service.
[ 15.551595] systemd-journald[313]: Received client request to flush runtime journal.
[ 15.558286] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 15.562909] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 15.562919] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 15.624860] usb 4-1.5: new full-speed USB device number 5 using ehci-pci
[ 15.734689] usb 4-1.5: string descriptor 0 read error: -22
[ 15.734696] usb 4-1.5: New USB device found, idVendor=0cf3, idProduct=3004, bcdDevice= 0.02
[ 15.734698] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 16.400864] mei_me 0000:00:16.0: wait hw ready failed
[ 16.400871] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 16.400887] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 18.007106] r8169 0000:05:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[ 18.007303] RTL8211E Gigabit Ethernet r8169-500:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-500:00, irq=IGNORE)
[ 18.182331] r8169 0000:05:00.0 eth0: Link is Down
[ 18.416961] mei_me 0000:00:16.0: wait hw ready failed
[ 18.416974] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 18.416998] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 20.432868] mei_me 0000:00:16.0: wait hw ready failed
[ 20.432876] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 20.432884] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 20.432886] mei_me 0000:00:16.0: reset failed ret = -19
[ 20.432888] mei_me 0000:00:16.0: link layer initialization failed.
[ 20.432891] mei_me 0000:00:16.0: init hw failure.
[ 20.432965] mei_me 0000:00:16.0: initialization failed.
[ 21.191140] r8169 0000:05:00.0 eth0: Link is Up - 1Gbps/Full - flow control off
[ 21.191164] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.276126] tun: Universal TUN/TAP device driver, 1.6
[ 186.752350] r8169 0000:05:00.0 eth0: Link is Down
[ 190.133328] r8169 0000:05:00.0 eth0: Link is Up - 1Gbps/Full - flow control off
[ 476.304874] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[ 476.414100] usb 1-1.2: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00
[ 476.414104] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 476.414106] usb 1-1.2: Product: Ultra Fit
[ 476.414108] usb 1-1.2: Manufacturer: SanDisk
[ 476.414110] usb 1-1.2: SerialNumber: 4C530001260716118034
[ 476.471903] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 476.478590] scsi host6: usb-storage 1-1.2:1.0
[ 476.478732] usbcore: registered new interface driver usb-storage
[ 476.485213] usbcore: registered new interface driver uas
[ 477.489915] scsi 6:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
[ 477.493802] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 477.494899] sd 6:0:0:0: [sdb] 121307136 512-byte logical blocks: (62.1 GB/57.8 GiB)
[ 477.496363] sd 6:0:0:0: [sdb] Write Protect is off
[ 477.496367] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 477.499272] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 477.529136] sdb: sdb1
[ 477.535624] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 480.839886] fuse: init (API version 7.31)
[ 489.031942] sdb: detected capacity change from 62109253632 to 0
[ 495.113517] usb 1-1.2: USB disconnect, device number 3
[ 516.760962] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 516.870628] usb 1-1.2: New USB device found, idVendor=0781, idProduct=5571, bcdDevice= 1.27
[ 516.870634] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 516.870636] usb 1-1.2: Product: Cruzer Fit
[ 516.870639] usb 1-1.2: Manufacturer: SanDisk
[ 516.870641] usb 1-1.2: SerialNumber: 4C531001580312104062
[ 516.872226] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 516.875895] scsi host6: usb-storage 1-1.2:1.0
[ 517.906398] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Fit 1.27 PQ: 0 ANSI: 6
[ 517.907287] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 517.910842] sd 6:0:0:0: [sdb] 30529536 512-byte logical blocks: (15.6 GB/14.6 GiB)
[ 517.912303] sd 6:0:0:0: [sdb] Write Protect is off
[ 517.912308] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 517.916150] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 517.963438] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 522.225191] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)