blob: 28d3d7d5620afc653baae71de1c8c1dd9560e61a [file] [log] [blame]
*** Pre-CBMEM romstage console overflowed, log truncated! ***
e RAM training (1).
100MHz reference clock support: yes
Trying CAS 9, tCK 320.
Found compatible clock, CAS pair.
Selected DRAM frequency: 800 MHz
Selected CAS latency : 9T
PLL busy... done in 10 us
MCU frequency is set at : 800 MHz
Done dimm mapping
Update PCI-E configuration space:
PCI(0, 0, 0)[a0] = 0
PCI(0, 0, 0)[a4] = 2
PCI(0, 0, 0)[bc] = 82a00000
PCI(0, 0, 0)[a8] = 7c600000
PCI(0, 0, 0)[ac] = 2
PCI(0, 0, 0)[b8] = 80000000
PCI(0, 0, 0)[b0] = 80a00000
PCI(0, 0, 0)[b4] = 80800000
PCI(0, 0, 0)[7c] = 7f
PCI(0, 0, 0)[70] = ff000000
PCI(0, 0, 0)[74] = 1
PCI(0, 0, 0)[78] = ff000c00
Done memory map
Done io registers
t123: 1767, 6000, 7620
ME: FW Partition Table : OK
ME: Bringup Loader Failure : NO
ME: Firmware Init Complete : NO
ME: Manufacturing Mode : NO
ME: Boot Options Present : NO
ME: Update In Progress : NO
ME: Current Working State : Normal
ME: Current Operation State : Bring up
ME: Current Operation Mode : Normal
ME: Error Code : No Error
ME: Progress Phase : BUP Phase
ME: Power Management Event : Clean Moff->Mx wake
ME: Progress Phase State : Waiting for DID BIOS message
ME: FWS2: 0x101f0126
ME: Bist in progress: 0x0
ME: ICC Status : 0x3
ME: Invoke MEBx : 0x0
ME: CPU replaced : 0x0
ME: MBP ready : 0x1
ME: MFS failure : 0x0
ME: Warm reset req : 0x0
ME: CPU repl valid : 0x1
ME: (Reserved) : 0x0
ME: FW update req : 0x0
ME: (Reserved) : 0x0
ME: Current state : 0x1f
ME: Current PM event: 0x0
ME: Progress code : 0x1
PASSED! Tell ME that DRAM is ready
ME: FWS2: 0x10500126
ME: Bist in progress: 0x0
ME: ICC Status : 0x3
ME: Invoke MEBx : 0x0
ME: CPU replaced : 0x0
ME: MBP ready : 0x1
ME: MFS failure : 0x0
ME: Warm reset req : 0x0
ME: CPU repl valid : 0x1
ME: (Reserved) : 0x0
ME: FW update req : 0x0
ME: (Reserved) : 0x0
ME: Current state : 0x50
ME: Current PM event: 0x0
ME: Progress code : 0x1
ME: Requested BIOS Action: Continue to boot
ME: FW Partition Table : OK
ME: Bringup Loader Failure : NO
ME: Firmware Init Complete : NO
ME: Manufacturing Mode : NO
ME: Boot Options Present : NO
ME: Update In Progress : NO
ME: Current Working State : Normal
ME: Current Operation State : M0 with UMA
ME: Current Operation Mode : Normal
ME: Error Code : No Error
ME: Progress Phase : BUP Phase
ME: Power Management Event : Clean Moff->Mx wake
ME: Progress Phase State : M0 kernel load
memcfg DDR3 ref clock 133 MHz
memcfg DDR3 clock 1596 MHz
memcfg channel assignment: A: 0, B 1, C 2
memcfg channel[0] config (00600010):
ECC inactive
enhanced interleave mode on
rank interleave on
DIMMA 4096 MB width x8 single rank, selected
DIMMB 0 MB width x8 single rank
memcfg channel[1] config (00600010):
ECC inactive
enhanced interleave mode on
rank interleave on
DIMMA 4096 MB width x8 single rank, selected
DIMMB 0 MB width x8 single rank
CBMEM:
IMD: root @ 7ffff000 254 entries.
IMD: root @ 7fffec00 62 entries.
External stage cache:
IMD: root @ 803ff000 254 entries.
IMD: root @ 803fec00 62 entries.
CBMEM entry for DIMM info: 0x7fffeaa0
MTRR Range: Start=ffc00000 End=0 (Size 400000)
MTRR Range: Start=0 End=1000000 (Size 1000000)
MTRR Range: Start=7f800000 End=80000000 (Size 800000)
MTRR Range: Start=80000000 End=80800000 (Size 800000)
CBFS: 'Master Header Locator' located CBFS at [320000:3fffc0)
CBFS: Locating 'fallback/postcar'
CBFS: Found @ offset 32800 size 3e74
Decompressing stage fallback/postcar @ 0x7ffcffc0 (32592 bytes)
Loading module at 7ffd0000 with entry 7ffd0000. filesize: 0x3c50 memsize: 0x7f10
Processing 114 relocs. Offset value of 0x7dfd0000
MRC: No data in cbmem for 'RW_MRC_CACHE'.
skipping PNP: 002e.1@f0 fixed resource, size=0!
skipping PNP: 002e.a@e5 fixed resource, size=0!
skipping PNP: 002e.a@e6 fixed resource, size=0!
skipping PNP: 002e.a@e7 fixed resource, size=0!
skipping PNP: 002e.a@f0 fixed resource, size=0!
skipping PNP: 002e.a@f2 fixed resource, size=0!
skipping PNP: 002e.f@f0 fixed resource, size=0!
skipping PNP: 002e.16@30 fixed resource, size=0!
skipping PNP: 002e.17@e0 fixed resource, size=0!
skipping PNP: 002e.17@e1 fixed resource, size=0!
skipping PNP: 002e.17@e2 fixed resource, size=0!
skipping PNP: 002e.17@e3 fixed resource, size=0!
skipping PNP: 002e.17@e5 fixed resource, size=0!
ERROR: PNP: 002e.b 70 irq size: 0x0000000001 not assigned
ME: response is not complete
ME: GET FW VERSION message failed
ME: response is not complete
ME: GET FWCAPS message failed
GMA: VBT couldn't be found