blob: e1a305fdad1fa34b0279bbdf343f75f2239aae8b [file] [log] [blame]
[ 0.000000] Linux version 5.10.47-rt45-greebo-multigpu (stefan@greebo) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #17 SMP PREEMPT_RT Sat Jul 3 19:55:11 CEST 2021
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.10.47-rt45-greebo-multigpu root=/dev/mapper/vg_greebo-parabola_root rw cryptdevice=/dev/disk/by-uuid/ca7da344-795a-4073-8e03-f8005f155cde:sda3_crypt quiet panic=5 console=ttyS0,115200n8 console=tty0 acpi_enforce_resources=lax radeon.si_support=0 amdgpu.si_support=1
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fb51fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fb52000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000037fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: ASUS P5Q/P5Q, BIOS 4.14-958-g2828fee7e0 07/12/2021
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3332.724 MHz processor
[ 0.001040] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001044] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001048] last_pfn = 0x380000 max_arch_pfn = 0x400000000
[ 0.001053] MTRR default type: uncachable
[ 0.001054] MTRR fixed ranges enabled:
[ 0.001055] 00000-9FFFF write-back
[ 0.001057] A0000-BFFFF uncachable
[ 0.001059] C0000-FFFFF write-back
[ 0.001060] MTRR variable ranges enabled:
[ 0.001060] 0 base 000000000 mask F80000000 write-back
[ 0.001063] 1 base 07FC00000 mask FFFC00000 uncachable
[ 0.001065] 2 base 080000000 mask FF0000000 write-combining
[ 0.001067] 3 base 100000000 mask F00000000 write-back
[ 0.001069] 4 base 200000000 mask E00000000 write-back
[ 0.001071] 5 disabled
[ 0.001071] 6 disabled
[ 0.003778] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.004162] last_pfn = 0x7fb52 max_arch_pfn = 0x400000000
[ 0.004933] RAMDISK: [mem 0x36437000-0x37212fff]
[ 0.004938] ACPI: Early table checksum verification disabled
[ 0.004943] ACPI: RSDP 0x00000000000F6B90 000024 (v02 COREv4)
[ 0.004949] ACPI: XSDT 0x000000007FB5C0E0 00004C (v01 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.004956] ACPI: FACP 0x000000007FB5E100 000114 (v06 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.004963] ACPI: DSDT 0x000000007FB5C280 001E71 (v02 COREv4 COREBOOT 00000001 INTL 20210331)
[ 0.004968] ACPI: FACS 0x000000007FB5C240 000040
[ 0.004971] ACPI: FACS 0x000000007FB5C240 000040
[ 0.004975] ACPI: SSDT 0x000000007FB5E220 00054C (v02 COREv4 COREBOOT 0000002A CORE 20210331)
[ 0.004979] ACPI: MCFG 0x000000007FB5E770 00003C (v01 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.004983] ACPI: APIC 0x000000007FB5E7B0 000068 (v03 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.004988] ACPI: HPET 0x000000007FB5E820 000038 (v01 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.004991] ACPI: Reserving FACP table memory at [mem 0x7fb5e100-0x7fb5e213]
[ 0.004993] ACPI: Reserving DSDT table memory at [mem 0x7fb5c280-0x7fb5e0f0]
[ 0.004994] ACPI: Reserving FACS table memory at [mem 0x7fb5c240-0x7fb5c27f]
[ 0.004996] ACPI: Reserving FACS table memory at [mem 0x7fb5c240-0x7fb5c27f]
[ 0.004997] ACPI: Reserving SSDT table memory at [mem 0x7fb5e220-0x7fb5e76b]
[ 0.004998] ACPI: Reserving MCFG table memory at [mem 0x7fb5e770-0x7fb5e7ab]
[ 0.005000] ACPI: Reserving APIC table memory at [mem 0x7fb5e7b0-0x7fb5e817]
[ 0.005001] ACPI: Reserving HPET table memory at [mem 0x7fb5e820-0x7fb5e857]
[ 0.005011] ACPI: Local APIC address 0xfee00000
[ 0.005043] Zone ranges:
[ 0.005043] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.005046] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.005048] Normal [mem 0x0000000100000000-0x000000037fffffff]
[ 0.005050] Movable zone start for each node
[ 0.005050] Early memory node ranges
[ 0.005051] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.005053] node 0: [mem 0x0000000000100000-0x000000007fb51fff]
[ 0.005055] node 0: [mem 0x0000000100000000-0x000000037fffffff]
[ 0.005058] Initmem setup node 0 [mem 0x0000000000001000-0x000000037fffffff]
[ 0.005060] On node 0 totalpages: 3144432
[ 0.005063] DMA zone: 64 pages used for memmap
[ 0.005064] DMA zone: 21 pages reserved
[ 0.005065] DMA zone: 3998 pages, LIFO batch:0
[ 0.005559] DMA zone: 28770 pages in unavailable ranges
[ 0.005560] DMA32 zone: 8110 pages used for memmap
[ 0.005561] DMA32 zone: 518994 pages, LIFO batch:63
[ 0.024220] DMA32 zone: 1198 pages in unavailable ranges
[ 0.024223] Normal zone: 40960 pages used for memmap
[ 0.024224] Normal zone: 2621440 pages, LIFO batch:63
[ 0.134232] ACPI: PM-Timer IO Port: 0x508
[ 0.134235] ACPI: Local APIC address 0xfee00000
[ 0.134243] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.134245] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.134257] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.134261] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.134264] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.134266] ACPI: IRQ0 used by override.
[ 0.134268] ACPI: IRQ9 used by override.
[ 0.134271] Using ACPI (MADT) for SMP configuration information
[ 0.134273] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.134279] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.134300] [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.134306] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.144736] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
[ 0.145869] percpu: Embedded 40 pages/cpu s124928 r8192 d30720 u1048576
[ 0.145876] pcpu-alloc: s124928 r8192 d30720 u1048576 alloc=1*2097152
[ 0.145880] pcpu-alloc: [0] 0 1
[ 0.145901] Built 1 zonelists, mobility grouping on. Total pages: 3095277
[ 0.145905] Kernel command line: BOOT_IMAGE=/vmlinuz-5.10.47-rt45-greebo-multigpu root=/dev/mapper/vg_greebo-parabola_root rw cryptdevice=/dev/disk/by-uuid/ca7da344-795a-4073-8e03-f8005f155cde:sda3_crypt quiet panic=5 console=ttyS0,115200n8 console=tty0 acpi_enforce_resources=lax radeon.si_support=0 amdgpu.si_support=1
[ 0.153884] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.158153] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.158202] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.346822] Memory: 12244936K/12577728K available (14338K kernel code, 1162K rwdata, 4292K rodata, 904K init, 1812K bss, 332536K reserved, 0K cma-reserved)
[ 0.346834] random: get_random_u64 called from __kmem_cache_create+0x1b/0x3d0 with crng_init=0
[ 0.346995] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.347020] Kernel/User page tables isolation: enabled
[ 0.347118] rcu: Preemptible hierarchical RCU implementation.
[ 0.347119] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.347121] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.347122] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads.
[ 0.347123] No expedited grace period (rcu_normal_after_boot).
[ 0.347124] Trampoline variant of Tasks RCU enabled.
[ 0.347125] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.347126] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.347140] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16
[ 0.347491] spurious 8259A interrupt: IRQ7.
[ 0.351270] Console: colour VGA+ 80x25
[ 0.351274] printk: console [tty0] enabled
[ 0.351295] printk: console [ttyS0] enabled
[ 0.351302] ACPI: Core revision 20200925
[ 0.351379] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.351399] APIC: Switch to symmetric I/O mode setup
[ 0.351811] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.356398] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x300a0d7a860, max_idle_ns: 440795264170 ns
[ 0.356407] Calibrating delay loop (skipped), value calculated using timer frequency.. 6665.44 BogoMIPS (lpj=3332724)
[ 0.356411] pid_max: default: 32768 minimum: 301
[ 0.356590] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.356718] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.357049] mce: CPU0: Thermal monitoring enabled (TM2)
[ 0.357054] process: using mwait in idle threads
[ 0.357059] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.357061] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.357065] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.357069] Spectre V2 : Mitigation: Full generic retpoline
[ 0.357070] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.357071] Speculative Store Bypass: Vulnerable
[ 0.357075] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.357201] Freeing SMP alternatives memory: 36K
[ 0.459420] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8600 @ 3.33GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.459606] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[ 0.459618] ... version: 2
[ 0.459619] ... bit width: 40
[ 0.459620] ... generic registers: 2
[ 0.459621] ... value mask: 000000ffffffffff
[ 0.459622] ... max period: 000000007fffffff
[ 0.459623] ... fixed-purpose events: 3
[ 0.459624] ... event mask: 0000000700000003
[ 0.459794] rcu: Hierarchical SRCU implementation.
[ 0.459960] smp: Bringing up secondary CPUs ...
[ 0.460118] x86: Booting SMP configuration:
[ 0.460119] .... node #0, CPUs: #1
[ 0.462438] smp: Brought up 1 node, 2 CPUs
[ 0.462438] smpboot: Max logical packages: 1
[ 0.462438] smpboot: Total of 2 processors activated (13330.89 BogoMIPS)
[ 0.464535] devtmpfs: initialized
[ 0.464748] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.464748] futex hash table entries: 512 (order: 4, 65536 bytes, linear)
[ 0.464748] NET: Registered protocol family 16
[ 0.465597] thermal_sys: Registered thermal governor 'step_wise'
[ 0.465618] cpuidle: using governor menu
[ 0.465618] ACPI: bus type PCI registered
[ 0.465618] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.465618] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.465618] PCI: Using configuration type 1 for base access
[ 0.471740] cryptd: max_cpu_qlen set to 1000
[ 0.472669] ACPI: Added _OSI(Module Device)
[ 0.472669] ACPI: Added _OSI(Processor Device)
[ 0.472669] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.472669] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.472669] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.472669] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.472669] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.474274] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.474886] ACPI: Interpreter enabled
[ 0.474903] ACPI: (supports S0 S3 S5)
[ 0.474905] ACPI: Using IOAPIC for interrupt routing
[ 0.474936] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.479783] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.479791] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.479849] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR]
[ 0.479949] PCI host bridge to bus 0000:00
[ 0.479951] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.479954] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.479956] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.479958] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.479960] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.479962] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.479964] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.479966] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.479968] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.479970] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.479972] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.479974] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.479975] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.479977] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.479979] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.479981] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.479983] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.479985] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.479988] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.480003] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
[ 0.480158] pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400
[ 0.480202] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.480366] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.480414] pci 0000:00:1a.0: reg 0x20: [io 0x4000-0x401f]
[ 0.480583] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.480622] pci 0000:00:1a.1: reg 0x20: [io 0x4020-0x403f]
[ 0.480788] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.480827] pci 0000:00:1a.2: reg 0x20: [io 0x4040-0x405f]
[ 0.481002] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.481019] pci 0000:00:1a.7: reg 0x10: [mem 0x90405000-0x904053ff]
[ 0.481100] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.481241] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.481259] pci 0000:00:1b.0: reg 0x10: [mem 0x90400000-0x90403fff 64bit]
[ 0.481333] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.481487] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.481562] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.481709] pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
[ 0.481781] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.481929] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.482008] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.482155] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
[ 0.482233] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.482387] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.482429] pci 0000:00:1d.0: reg 0x20: [io 0x4060-0x407f]
[ 0.482596] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.482635] pci 0000:00:1d.1: reg 0x20: [io 0x4080-0x409f]
[ 0.482800] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.482839] pci 0000:00:1d.2: reg 0x20: [io 0x40a0-0x40bf]
[ 0.483014] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.483031] pci 0000:00:1d.7: reg 0x10: [mem 0x90406000-0x904063ff]
[ 0.483111] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.483256] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.483438] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.483517] pci 0000:00:1f.0: quirk: [io 0x0500-0x057f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.483522] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
[ 0.483526] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.483530] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 4700 (mask 001f)
[ 0.483685] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[ 0.483698] pci 0000:00:1f.2: reg 0x10: [io 0x40e0-0x40e7]
[ 0.483706] pci 0000:00:1f.2: reg 0x14: [io 0x40f0-0x40f3]
[ 0.483714] pci 0000:00:1f.2: reg 0x18: [io 0x40e8-0x40ef]
[ 0.483722] pci 0000:00:1f.2: reg 0x1c: [io 0x40f4-0x40f7]
[ 0.483729] pci 0000:00:1f.2: reg 0x20: [io 0x40c0-0x40df]
[ 0.483737] pci 0000:00:1f.2: reg 0x24: [mem 0x90404000-0x904047ff]
[ 0.483778] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.483910] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.483927] pci 0000:00:1f.3: reg 0x10: [mem 0x90407000-0x904070ff 64bit]
[ 0.483947] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.484129] pci 0000:01:00.0: [1002:6811] type 00 class 0x030000
[ 0.484147] pci 0000:01:00.0: reg 0x10: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.484158] pci 0000:01:00.0: reg 0x18: [mem 0x90000000-0x9003ffff 64bit]
[ 0.484166] pci 0000:01:00.0: reg 0x20: [io 0x1000-0x10ff]
[ 0.484180] pci 0000:01:00.0: reg 0x30: [mem 0x90040000-0x9005ffff pref]
[ 0.484187] pci 0000:01:00.0: enabling Extended Tags
[ 0.484248] pci 0000:01:00.0: supports D1 D2
[ 0.484250] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.484273] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[ 0.484348] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[ 0.484365] pci 0000:01:00.1: reg 0x10: [mem 0x90060000-0x90063fff 64bit]
[ 0.484400] pci 0000:01:00.1: enabling Extended Tags
[ 0.484449] pci 0000:01:00.1: supports D1 D2
[ 0.484588] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.484591] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
[ 0.484595] pci 0000:00:01.0: bridge window [mem 0x90000000-0x900fffff]
[ 0.484598] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.484643] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.484694] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.484763] pci 0000:04:00.0: [11ab:6121] type 00 class 0x01018f
[ 0.484785] pci 0000:04:00.0: reg 0x10: [io 0x2010-0x2017]
[ 0.484797] pci 0000:04:00.0: reg 0x14: [io 0x2020-0x2023]
[ 0.484809] pci 0000:04:00.0: reg 0x18: [io 0x2018-0x201f]
[ 0.484821] pci 0000:04:00.0: reg 0x1c: [io 0x2024-0x2027]
[ 0.484832] pci 0000:04:00.0: reg 0x20: [io 0x2000-0x200f]
[ 0.484844] pci 0000:04:00.0: reg 0x24: [mem 0x90100000-0x901003ff]
[ 0.484918] pci 0000:04:00.0: supports D1
[ 0.484920] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
[ 0.485009] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.485019] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.485023] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.485027] pci 0000:00:1c.4: bridge window [mem 0x90100000-0x901fffff]
[ 0.485095] pci 0000:05:00.0: [1969:1026] type 00 class 0x020000
[ 0.485122] pci 0000:05:00.0: reg 0x10: [mem 0x90200000-0x9023ffff 64bit]
[ 0.485135] pci 0000:05:00.0: reg 0x18: [io 0x3000-0x307f]
[ 0.485247] pci 0000:05:00.0: PME# supported from D3hot D3cold
[ 0.485337] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.485347] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.485351] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
[ 0.485355] pci 0000:00:1c.5: bridge window [mem 0x90200000-0x902fffff]
[ 0.485376] pci_bus 0000:06: extended config space not accessible
[ 0.485408] pci 0000:06:01.0: [1102:0002] type 00 class 0x040100
[ 0.485425] pci 0000:06:01.0: reg 0x10: [io 0x5100-0x511f]
[ 0.485498] pci 0000:06:01.0: supports D1 D2
[ 0.485598] pci 0000:06:01.1: [1102:7002] type 00 class 0x098000
[ 0.485614] pci 0000:06:01.1: reg 0x10: [io 0x5120-0x5127]
[ 0.485687] pci 0000:06:01.1: supports D1 D2
[ 0.485762] pci 0000:06:02.0: [9004:5078] type 00 class 0x010000
[ 0.485779] pci 0000:06:02.0: reg 0x10: [io 0x5000-0x50ff]
[ 0.485789] pci 0000:06:02.0: reg 0x14: [mem 0x90300000-0x90300fff]
[ 0.485956] pci 0000:06:03.0: [11c1:5811] type 00 class 0x0c0010
[ 0.485973] pci 0000:06:03.0: reg 0x10: [mem 0x90301000-0x90301fff]
[ 0.486047] pci 0000:06:03.0: supports D1 D2
[ 0.486049] pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.486153] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[ 0.486158] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
[ 0.486162] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff]
[ 0.486167] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.486170] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.486172] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.486174] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 0.486176] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[ 0.486179] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 0.486181] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[ 0.486183] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.486185] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.486187] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.486189] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.486191] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.486194] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.486196] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 0.486198] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[ 0.486200] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 0.486203] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[ 0.486205] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.486232] pci_bus 0000:00: on NUMA node 0
[ 0.486395] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.486469] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.486538] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.486607] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.486674] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.486742] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.486810] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.486878] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.487227] iommu: Default domain type: Translated
[ 0.487322] SCSI subsystem initialized
[ 0.487421] libata version 3.00 loaded.
[ 0.487447] ACPI: bus type USB registered
[ 0.487468] usbcore: registered new interface driver usbfs
[ 0.487481] usbcore: registered new interface driver hub
[ 0.487490] usbcore: registered new device driver usb
[ 0.487536] Advanced Linux Sound Architecture Driver Initialized.
[ 0.487609] PCI: Using ACPI for IRQ routing
[ 0.493404] PCI: pci_cache_line_size set to 64 bytes
[ 0.493486] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.493489] e820: reserve RAM buffer [mem 0x7fb52000-0x7fffffff]
[ 0.493526] hpet: 4 channels of 0 reserved for per-cpu timers
[ 0.493530] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.493536] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.495422] clocksource: Switched to clocksource tsc-early
[ 0.495503] pnp: PnP ACPI init
[ 0.495598] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.495603] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.495606] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.495609] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.495611] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.495614] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.495617] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.495619] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.495627] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.495909] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.495917] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.495983] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.495987] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.495989] system 00:02: [io 0x0580-0x05bf] has been reserved
[ 0.495996] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.496024] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.496067] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.496106] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.496131] pnp: PnP ACPI: found 6 devices
[ 0.502639] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.502684] NET: Registered protocol family 2
[ 0.503145] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.506214] tcp_listen_portaddr_hash hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.506397] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.506770] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes, linear)
[ 0.508535] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.508644] UDP hash table entries: 8192 (order: 8, 1048576 bytes, linear)
[ 0.509256] UDP-Lite hash table entries: 8192 (order: 8, 1048576 bytes, linear)
[ 0.509949] NET: Registered protocol family 1
[ 0.510162] RPC: Registered named UNIX socket transport module.
[ 0.510164] RPC: Registered udp transport module.
[ 0.510165] RPC: Registered tcp transport module.
[ 0.510166] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.510208] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.510215] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
[ 0.510220] pci 0000:00:01.0: bridge window [mem 0x90000000-0x900fffff]
[ 0.510223] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.510228] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.510239] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.510248] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.510251] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.510255] pci 0000:00:1c.4: bridge window [mem 0x90100000-0x901fffff]
[ 0.510263] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.510265] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
[ 0.510270] pci 0000:00:1c.5: bridge window [mem 0x90200000-0x902fffff]
[ 0.510278] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 0.510281] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
[ 0.510285] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff]
[ 0.510293] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.510295] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.510297] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.510300] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.510302] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.510304] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.510306] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.510308] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.510310] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.510312] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.510314] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.510316] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.510319] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.510321] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.510323] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.510325] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.510327] pci_bus 0000:00: resource 20 [mem 0x80000000-0xfebfffff window]
[ 0.510329] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.510331] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.510333] pci_bus 0000:01: resource 1 [mem 0x90000000-0x900fffff]
[ 0.510335] pci_bus 0000:01: resource 2 [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.510338] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.510340] pci_bus 0000:04: resource 1 [mem 0x90100000-0x901fffff]
[ 0.510342] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.510344] pci_bus 0000:05: resource 1 [mem 0x90200000-0x902fffff]
[ 0.510346] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
[ 0.510348] pci_bus 0000:06: resource 1 [mem 0x90300000-0x903fffff]
[ 0.510350] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window]
[ 0.510352] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window]
[ 0.510354] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.510356] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.510358] pci_bus 0000:06: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.510360] pci_bus 0000:06: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.510362] pci_bus 0000:06: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.510365] pci_bus 0000:06: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.510366] pci_bus 0000:06: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.510369] pci_bus 0000:06: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.510371] pci_bus 0000:06: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.510373] pci_bus 0000:06: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.510375] pci_bus 0000:06: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.510377] pci_bus 0000:06: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.510379] pci_bus 0000:06: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.510381] pci_bus 0000:06: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.510383] pci_bus 0000:06: resource 20 [mem 0x80000000-0xfebfffff window]
[ 0.510385] pci_bus 0000:06: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.512195] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.512243] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.512306] PCI: CLS 64 bytes, default 64
[ 0.512374] Unpacking initramfs...
[ 0.700855] Freeing initrd memory: 14192K
[ 0.700869] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.700870] software IO TLB: mapped [mem 0x000000007bb52000-0x000000007fb52000] (64MB)
[ 0.701540] workingset: timestamp_bits=62 max_order=22 bucket_order=0
[ 0.704589] NFS: Registering the id_resolver key type
[ 0.704600] Key type id_resolver registered
[ 0.704601] Key type id_legacy registered
[ 0.704634] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.704638] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.704649] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.704840] SGI XFS with security attributes, no debug enabled
[ 0.719061] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.719064] io scheduler mq-deadline registered
[ 0.719423] pcieport 0000:00:01.0: PME: Signaling with IRQ 24
[ 0.719700] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
[ 0.720001] pcieport 0000:00:1c.1: PME: Signaling with IRQ 26
[ 0.720278] pcieport 0000:00:1c.4: PME: Signaling with IRQ 27
[ 0.720547] pcieport 0000:00:1c.5: PME: Signaling with IRQ 28
[ 0.720819] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.723958] ACPI: Power Button [PWRF]
[ 0.724034] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.724090] clocksource: Switched to clocksource hpet
[ 0.724381] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.724481] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.725081] [drm] amdgpu kernel modesetting enabled.
[ 0.725223] [drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6811 0x1043:0x2015 0x81).
[ 0.725228] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[ 0.725236] [drm] register mmio base: 0x90000000
[ 0.725238] [drm] register mmio size: 262144
[ 0.725240] [drm] PCIE atomic ops is not supported
[ 0.725245] [drm] add ip block number 0 <si_common>
[ 0.725247] [drm] add ip block number 1 <gmc_v6_0>
[ 0.725248] [drm] add ip block number 2 <si_ih>
[ 0.725250] [drm] add ip block number 3 <gfx_v6_0>
[ 0.725251] [drm] add ip block number 4 <si_dma>
[ 0.725252] [drm] add ip block number 5 <si_dpm>
[ 0.725254] [drm] add ip block number 6 <dce_v6_0>
[ 0.725255] [drm] add ip block number 7 <uvd_v3_1>
[ 0.751027] [drm] BIOS signature incorrect 4c 7
[ 0.751034] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window]
[ 0.751039] caller pci_map_rom+0x79/0x1c0 mapping multiple BARs
[ 0.751167] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR
[ 0.751170] amdgpu: ATOM BIOS: 115-403PMI2-101
[ 0.751394] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[ 0.751412] amdgpu 0000:01:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[ 0.751416] amdgpu 0000:01:00.0: amdgpu: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF
[ 0.751422] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 0.751424] [drm] RAM width 256bits GDDR5
[ 0.751487] [TTM] Zone kernel: Available graphics memory: 6129710 KiB
[ 0.751490] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 0.751491] [TTM] Initializing pool allocator
[ 0.751497] [TTM] Initializing DMA pool allocator
[ 0.751551] [drm] amdgpu: 2048M of VRAM memory ready
[ 0.751556] [drm] amdgpu: 3072M of GTT memory ready.
[ 0.751560] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 0.752190] amdgpu 0000:01:00.0: amdgpu: PCIE GART of 1024M enabled (table at 0x000000F400900000).
[ 0.752891] [drm] Internal thermal controller with fan control
[ 0.752903] [drm] amdgpu: dpm initialized
[ 0.752965] [drm] AMDGPU Display Connectors
[ 0.752966] [drm] Connector 0:
[ 0.752967] [drm] DP-1
[ 0.752968] [drm] HPD4
[ 0.752968] [drm] DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f
[ 0.752971] [drm] Encoders:
[ 0.752972] [drm] DFP1: INTERNAL_UNIPHY2
[ 0.752973] [drm] Connector 1:
[ 0.752974] [drm] HDMI-A-1
[ 0.752974] [drm] HPD5
[ 0.752975] [drm] DDC: 0x1950 0x1950 0x1951 0x1951 0x1952 0x1952 0x1953 0x1953
[ 0.752977] [drm] Encoders:
[ 0.752978] [drm] DFP2: INTERNAL_UNIPHY2
[ 0.752979] [drm] Connector 2:
[ 0.752980] [drm] DVI-I-1
[ 0.752980] [drm] HPD6
[ 0.752981] [drm] DDC: 0x1960 0x1960 0x1961 0x1961 0x1962 0x1962 0x1963 0x1963
[ 0.752983] [drm] Encoders:
[ 0.752984] [drm] DFP3: INTERNAL_UNIPHY
[ 0.752985] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 0.752986] [drm] Connector 3:
[ 0.752986] [drm] DVI-D-1
[ 0.752987] [drm] HPD1
[ 0.752988] [drm] DDC: 0x195c 0x195c 0x195d 0x195d 0x195e 0x195e 0x195f 0x195f
[ 0.752990] [drm] Encoders:
[ 0.752991] [drm] DFP4: INTERNAL_UNIPHY1
[ 0.752996] [drm] Found UVD firmware Version: 64.0 Family ID: 13
[ 0.755090] [drm] PCIE gen 2 link speeds already enabled
[ 1.288857] [drm] UVD initialized successfully.
[ 1.288860] amdgpu 0000:01:00.0: amdgpu: SE 2, SH per SE 2, CU per SH 5, active_cu_number 16
[ 1.387818] [drm] fb mappable at 0x80D9F000
[ 1.387820] [drm] vram apper at 0x80000000
[ 1.387821] [drm] size 7680000
[ 1.387822] [drm] fb depth is 24
[ 1.387823] [drm] pitch is 6400
[ 1.387903] fbcon: amdgpudrmfb (fb0) is primary device
[ 1.597089] Console: switching to colour frame buffer device 200x75
[ 1.603232] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[ 1.908392] [drm] Initialized amdgpu 3.40.0 20150101 for 0000:01:00.0 on minor 0
[ 1.910605] loop: module loaded
[ 1.910685] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20200925/utaddress-204)
[ 1.910691] ACPI: This conflict may cause random problems and system instability
[ 1.910692] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.910698] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20200925/utaddress-204)
[ 1.910702] ACPI: This conflict may cause random problems and system instability
[ 1.910703] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.910704] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20200925/utaddress-204)
[ 1.910708] ACPI: This conflict may cause random problems and system instability
[ 1.910709] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.910928] gpio_ich gpio_ich.1.auto: GPIO from 451 to 511
[ 1.912254] ahc_pci:6:2:0: Host Adapter Bios disabled. Using default SCSI device parameters
[ 6.974421] scsi host0: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 2902/04/10/15/20C/30C SCSI adapter>
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
[ 8.812739] ahci 0000:00:1f.2: version 3.0
[ 8.812938] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 8.812975] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 8.812980] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ccc
[ 8.814002] scsi host1: ahci
[ 8.814190] scsi host2: ahci
[ 8.814367] scsi host3: ahci
[ 8.814563] scsi host4: ahci
[ 8.814743] scsi host5: ahci
[ 8.814916] scsi host6: ahci
[ 8.814995] ata1: SATA max UDMA/133 abar m2048@0x90404000 port 0x90404100 irq 30
[ 8.814999] ata2: SATA max UDMA/133 abar m2048@0x90404000 port 0x90404180 irq 30
[ 8.815001] ata3: SATA max UDMA/133 abar m2048@0x90404000 port 0x90404200 irq 30
[ 8.815004] ata4: SATA max UDMA/133 abar m2048@0x90404000 port 0x90404280 irq 30
[ 8.815006] ata5: SATA max UDMA/133 abar m2048@0x90404000 port 0x90404300 irq 30
[ 8.815009] ata6: SATA max UDMA/133 abar m2048@0x90404000 port 0x90404380 irq 30
[ 8.815796] scsi host7: pata_marvell
[ 8.815949] scsi host8: pata_marvell
[ 8.816007] ata7: PATA max UDMA/100 cmd 0x2010 ctl 0x2020 bmdma 0x2000 irq 16
[ 8.816010] ata8: PATA max UDMA/133 cmd 0x2018 ctl 0x2024 bmdma 0x2008 irq 16
[ 8.884447] firewire_ohci 0000:06:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 8.884477] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.884479] ehci-pci: EHCI PCI platform driver
[ 8.884614] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 8.884623] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 8.884636] ehci-pci 0000:00:1a.7: debug port 1
[ 8.888550] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 8.888607] ehci-pci 0000:00:1a.7: irq 18, io mem 0x90405000
[ 8.895425] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 8.895494] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 8.895498] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.895501] usb usb1: Product: EHCI Host Controller
[ 8.895502] usb usb1: Manufacturer: Linux 5.10.47-rt45-greebo-multigpu ehci_hcd
[ 8.895504] usb usb1: SerialNumber: 0000:00:1a.7
[ 8.895678] hub 1-0:1.0: USB hub found
[ 8.895686] hub 1-0:1.0: 6 ports detected
[ 8.896094] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 8.896101] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 8.896113] ehci-pci 0000:00:1d.7: debug port 1
[ 8.900023] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 8.900072] ehci-pci 0000:00:1d.7: irq 16, io mem 0x90406000
[ 8.906419] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 8.906459] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 8.906463] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.906465] usb usb2: Product: EHCI Host Controller
[ 8.906467] usb usb2: Manufacturer: Linux 5.10.47-rt45-greebo-multigpu ehci_hcd
[ 8.906469] usb usb2: SerialNumber: 0000:00:1d.7
[ 8.906627] hub 2-0:1.0: USB hub found
[ 8.906635] hub 2-0:1.0: 6 ports detected
[ 8.906925] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.907034] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 8.907041] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 8.907113] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004000
[ 8.907176] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 8.907179] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.907182] usb usb3: Product: UHCI Host Controller
[ 8.907183] usb usb3: Manufacturer: Linux 5.10.47-rt45-greebo-multigpu uhci_hcd
[ 8.907185] usb usb3: SerialNumber: 0000:00:1a.0
[ 8.907318] hub 3-0:1.0: USB hub found
[ 8.907326] hub 3-0:1.0: 2 ports detected
[ 8.907606] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 8.907613] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 8.907687] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004020
[ 8.907744] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 8.907748] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.907750] usb usb4: Product: UHCI Host Controller
[ 8.907752] usb usb4: Manufacturer: Linux 5.10.47-rt45-greebo-multigpu uhci_hcd
[ 8.907754] usb usb4: SerialNumber: 0000:00:1a.1
[ 8.907891] hub 4-0:1.0: USB hub found
[ 8.907899] hub 4-0:1.0: 2 ports detected
[ 8.908158] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 8.908167] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 8.908238] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00004040
[ 8.908302] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 8.908305] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.908308] usb usb5: Product: UHCI Host Controller
[ 8.908309] usb usb5: Manufacturer: Linux 5.10.47-rt45-greebo-multigpu uhci_hcd
[ 8.908311] usb usb5: SerialNumber: 0000:00:1a.2
[ 8.908459] hub 5-0:1.0: USB hub found
[ 8.908467] hub 5-0:1.0: 2 ports detected
[ 8.908730] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 8.908738] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 8.908801] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00004060
[ 8.908861] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 8.908864] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.908867] usb usb6: Product: UHCI Host Controller
[ 8.908868] usb usb6: Manufacturer: Linux 5.10.47-rt45-greebo-multigpu uhci_hcd
[ 8.908870] usb usb6: SerialNumber: 0000:00:1d.0
[ 8.909005] hub 6-0:1.0: USB hub found
[ 8.909013] hub 6-0:1.0: 2 ports detected
[ 8.909267] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 8.909274] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 8.909341] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004080
[ 8.909400] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 8.909444] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.909447] usb usb7: Product: UHCI Host Controller
[ 8.909448] usb usb7: Manufacturer: Linux 5.10.47-rt45-greebo-multigpu uhci_hcd
[ 8.909450] usb usb7: SerialNumber: 0000:00:1d.1
[ 8.909580] hub 7-0:1.0: USB hub found
[ 8.909588] hub 7-0:1.0: 2 ports detected
[ 8.909842] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 8.909850] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 8.909913] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
[ 8.909972] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 8.909976] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.909978] usb usb8: Product: UHCI Host Controller
[ 8.909980] usb usb8: Manufacturer: Linux 5.10.47-rt45-greebo-multigpu uhci_hcd
[ 8.909982] usb usb8: SerialNumber: 0000:00:1d.2
[ 8.910110] hub 8-0:1.0: USB hub found
[ 8.910118] hub 8-0:1.0: 2 ports detected
[ 8.910355] usbcore: registered new interface driver uas
[ 8.910391] usbcore: registered new interface driver usb-storage
[ 8.910439] usbcore: registered new interface driver ftdi_sio
[ 8.910446] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 8.910502] usbcore: registered new interface driver mct_u232
[ 8.910510] usbserial: USB Serial support registered for MCT U232
[ 8.910525] usbcore: registered new interface driver pl2303
[ 8.910531] usbserial: USB Serial support registered for pl2303
[ 8.910578] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 8.913239] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.913290] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 8.918482] mousedev: PS/2 mouse device common for all mice
[ 8.918572] rtc_cmos 00:03: RTC can wake from S4
[ 8.918834] rtc_cmos 00:03: registered as rtc0
[ 8.918862] rtc_cmos 00:03: setting system clock to 2021-07-12T15:04:36 UTC (1626102276)
[ 8.918891] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 8.918915] i2c /dev entries driver
[ 8.919350] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 8.920300] w83627ehf: Found W83667HG chip at 0x290
[ 8.920622] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 8.920651] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0560)
[ 8.920742] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.920840] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[ 8.920856] hid: raw HID events driver (C) Jiri Kosina
[ 8.920895] usbcore: registered new interface driver usbhid
[ 8.920896] usbhid: USB HID core driver
[ 8.929357] gameport gameport0: EMU10K1 is pci0000:06:01.1/gameport0, io 0x5120, speed 930kHz
[ 8.936513] usbcore: registered new interface driver snd-usb-audio
[ 8.936747] NET: Registered protocol family 10
[ 8.938931] Segment Routing with IPv6
[ 8.938955] NET: Registered protocol family 17
[ 8.938982] Key type dns_resolver registered
[ 8.939232] microcode: sig=0x1067a, pf=0x1, revision=0xa0b
[ 8.939243] microcode: Microcode Update Driver: v2.2.
[ 8.939248] IPI shorthand broadcast: enabled
[ 8.939329] printk: console [tty0]: printing thread started
[ 8.939355] printk: console [ttyS0]: printing thread started
[ 8.939363] registered taskstats version 1
[ 8.939705] printk: console [netcon0]: printing thread started
[ 8.939709] printk: console [netcon0] enabled
[ 8.939710] netconsole: network logging started
[ 8.939930] ALSA device list:
[ 8.939932] #0: SB Live! 5.1 (rev.8, serial:0x80641102) at 0x5100, irq 17
[ 9.123841] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.125745] ata1.00: supports DRM functions and may not be fully accessible
[ 9.126160] ata1.00: disabling queued TRIM support
[ 9.126162] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0DB6Q, max UDMA/133
[ 9.126165] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 9.126756] ata1.00: supports DRM functions and may not be fully accessible
[ 9.127163] ata1.00: disabling queued TRIM support
[ 9.127584] ata1.00: configured for UDMA/133
[ 9.127691] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5
[ 9.128229] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 9.128317] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 9.128333] sd 1:0:0:0: [sda] Write Protect is off
[ 9.128336] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.128362] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.129134] sda: sda1 sda2 sda3
[ 9.129555] sd 1:0:0:0: [sda] Attached SCSI disk
[ 9.136423] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 9.298543] usb 1-2: New USB device found, idVendor=0bda, idProduct=0321, bcdDevice=11.21
[ 9.298548] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.298550] usb 1-2: Product: USB3.0 Card Reader
[ 9.298552] usb 1-2: Manufacturer: Realtek
[ 9.298554] usb 1-2: SerialNumber: 201312261010
[ 9.304695] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 9.304823] scsi host9: usb-storage 1-2:1.0
[ 9.390482] firewire_core 0000:06:03.0: created device fw0: GUID 001e8c00017d4026, S400
[ 9.418425] usb 1-3: new high-speed USB device number 3 using ehci-pci
[ 9.435750] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.435979] ata2.00: supports DRM functions and may not be fully accessible
[ 9.436412] ata2.00: ATA-11: Samsung SSD 870 EVO 250GB, SVT01B6Q, max UDMA/133
[ 9.436415] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 9.438173] ata2.00: supports DRM functions and may not be fully accessible
[ 9.440038] ata2.00: configured for UDMA/133
[ 9.440121] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 870 1B6Q PQ: 0 ANSI: 5
[ 9.440438] ata2.00: Enabling discard_zeroes_data
[ 9.440447] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 9.440519] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 9.440534] sd 2:0:0:0: [sdb] Write Protect is off
[ 9.440536] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 9.440560] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.441163] ata2.00: Enabling discard_zeroes_data
[ 9.441482] sdb: sdb1 sdb2 sdb3
[ 9.441706] ata2.00: Enabling discard_zeroes_data
[ 9.441880] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 9.532662] random: fast init done
[ 9.538424] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[ 9.548288] usb 1-3: New USB device found, idVendor=048d, idProduct=1176, bcdDevice= 1.00
[ 9.548291] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.548293] usb 1-3: Product: USB Mass Storage Device
[ 9.548294] usb 1-3: Manufacturer: Generic
[ 9.548447] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 9.548555] scsi host10: usb-storage 1-3:1.0
[ 9.747837] ata3: SATA link down (SStatus 0 SControl 300)
[ 9.859459] usb 6-1: New USB device found, idVendor=08bb, idProduct=2904, bcdDevice= 1.00
[ 9.859463] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.859466] usb 6-1: Product: USB Audio CODEC
[ 9.859468] usb 6-1: Manufacturer: Burr-Brown from TI
[ 9.912792] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.3/0003:08BB:2904.0001/input/input3
[ 9.964510] hid-generic 0003:08BB:2904.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:1d.0-1/input3
[ 10.032420] usb 2-2: new high-speed USB device number 3 using ehci-pci
[ 10.051719] ata4: SATA link down (SStatus 0 SControl 300)
[ 10.162002] usb 2-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
[ 10.162006] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 10.162009] usb 2-2: Product: USB2.0 Hub
[ 10.162425] hub 2-2:1.0: USB hub found
[ 10.162753] hub 2-2:1.0: 2 ports detected
[ 10.355856] ata5: SATA link down (SStatus 0 SControl 300)
[ 10.376424] scsi 9:0:0:0: Direct-Access Generic- USB3.0 CRW-CF/MD 1.00 PQ: 0 ANSI: 4
[ 10.376669] sd 9:0:0:0: Attached scsi generic sg2 type 0
[ 10.388303] scsi 9:0:0:1: Direct-Access Generic- USB3.0 CRW-SD 1.00 PQ: 0 ANSI: 4
[ 10.388647] sd 9:0:0:1: Attached scsi generic sg3 type 0
[ 10.394042] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[ 10.404674] scsi 9:0:0:2: Direct-Access Generic- USB3.0 CRW-MS 1.00 PQ: 0 ANSI: 4
[ 10.404907] sd 9:0:0:2: Attached scsi generic sg4 type 0
[ 10.408422] usb 7-2: new low-speed USB device number 2 using uhci_hcd
[ 10.410161] sd 9:0:0:1: [sdd] Attached SCSI removable disk
[ 10.415170] sd 9:0:0:2: [sde] Attached SCSI removable disk
[ 10.559306] scsi 10:0:0:0: Direct-Access Generic USB Flash Disk 0.00 PQ: 0 ANSI: 6
[ 10.559634] sd 10:0:0:0: Attached scsi generic sg5 type 0
[ 10.560552] sd 10:0:0:0: [sdf] 15974400 512-byte logical blocks: (8.18 GB/7.62 GiB)
[ 10.561434] sd 10:0:0:0: [sdf] Write Protect is off
[ 10.561437] sd 10:0:0:0: [sdf] Mode Sense: 23 00 00 00
[ 10.562292] sd 10:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 10.567446] usb 7-2: New USB device found, idVendor=046a, idProduct=0023, bcdDevice= 0.32
[ 10.567448] usb 7-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 10.567917] sdf: sdf1 sdf2
[ 10.571049] sd 10:0:0:0: [sdf] Attached SCSI removable disk
[ 10.584980] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/0003:046A:0023.0002/input/input4
[ 10.636591] hid-generic 0003:046A:0023.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.1-2/input0
[ 10.650074] input: HID 046a:0023 Consumer Control as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/0003:046A:0023.0003/input/input5
[ 10.660220] ata6: SATA link down (SStatus 0 SControl 300)
[ 10.701509] input: HID 046a:0023 System Control as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/0003:046A:0023.0003/input/input6
[ 10.701584] hid-generic 0003:046A:0023.0003: input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.1-2/input1
[ 10.839788] ata8.00: ATA-7: Config Disk 0, 1.2569, max MWDMA2
[ 10.839792] ata8.00: 16777215 sectors, multi 1: LBA
[ 10.842510] scsi 8:0:0:0: Direct-Access ATA Config Disk 0 69 PQ: 0 ANSI: 5
[ 10.842868] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 10.842943] sd 8:0:0:0: [sdg] 16777215 512-byte logical blocks: (8.59 GB/8.00 GiB)
[ 10.842958] sd 8:0:0:0: [sdg] Write Protect is off
[ 10.842960] sd 8:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[ 10.842985] sd 8:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 10.843862] sd 8:0:0:0: [sdg] Attached SCSI disk
[ 10.844267] Freeing unused kernel image (initmem) memory: 904K
[ 10.847416] Write protecting the kernel read-only data: 22528k
[ 10.848482] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 10.849275] Freeing unused kernel image (rodata/data gap) memory: 1852K
[ 10.849341] Run /init as init process
[ 10.849342] with arguments:
[ 10.849343] /init
[ 10.849344] with environment:
[ 10.849345] HOME=/
[ 10.849346] TERM=linux
[ 10.849346] BOOT_IMAGE=/vmlinuz-5.10.47-rt45-greebo-multigpu
[ 10.849347] cryptdevice=/dev/disk/by-uuid/ca7da344-795a-4073-8e03-f8005f155cde:sda3_crypt
[ 10.858622] udevd[145]: starting version 3.2.9
[ 10.858819] random: udevd: uninitialized urandom read (16 bytes read)
[ 10.858859] random: udevd: uninitialized urandom read (16 bytes read)
[ 10.858871] random: udevd: uninitialized urandom read (16 bytes read)
[ 10.859926] udevd[146]: starting eudev-3.2.9
[ 10.989718] md/raid1:md0: active with 2 out of 2 mirrors
[ 10.989738] md0: detected capacity change from 0 to 1071644672
[ 10.990347] md/raid1:md1: active with 2 out of 2 mirrors
[ 10.990362] md1: detected capacity change from 0 to 64389906432
[ 10.990420] md/raid1:md2: active with 2 out of 2 mirrors
[ 11.005018] md2: detected capacity change from 0 to 160927055872
[ 11.024417] usb 2-5: new high-speed USB device number 5 using ehci-pci
[ 11.154878] usb 2-5: New USB device found, idVendor=05e3, idProduct=0614, bcdDevice= 1.97
[ 11.154884] usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 11.154887] usb 2-5: Product: USB2.0 Hub Charger
[ 11.155300] hub 2-5:1.0: USB hub found
[ 11.155625] hub 2-5:1.0: 4 ports detected
[ 11.666425] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[ 11.833469] usb 8-2: New USB device found, idVendor=046d, idProduct=c332, bcdDevice= 3.02
[ 11.833474] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 11.833476] usb 8-2: Product: Gaming Mouse G502
[ 11.833478] usb 8-2: Manufacturer: Logitech
[ 11.833480] usb 8-2: SerialNumber: 0B7A364B3738
[ 11.843005] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:046D:C332.0004/input/input7
[ 11.843133] hid-generic 0003:046D:C332.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:00:1d.2-2/input0
[ 11.847717] input: Logitech Gaming Mouse G502 Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:046D:C332.0005/input/input8
[ 11.899524] input: Logitech Gaming Mouse G502 Consumer Control as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:046D:C332.0005/input/input9
[ 11.899596] input: Logitech Gaming Mouse G502 System Control as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:046D:C332.0005/input/input10
[ 11.899708] hid-generic 0003:046D:C332.0005: input,hiddev96,hidraw4: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:00:1d.2-2/input1
[ 12.110419] usb 2-5.2: new full-speed USB device number 7 using ehci-pci
[ 12.190502] usb 2-5.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1
[ 12.192249] usb 2-5.2: New USB device found, idVendor=27b8, idProduct=01ed, bcdDevice= 0.02
[ 12.192253] usb 2-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 12.192256] usb 2-5.2: Product: blink(1) mk2
[ 12.192257] usb 2-5.2: Manufacturer: ThingM
[ 12.192259] usb 2-5.2: SerialNumber: 200060D6
[ 12.194295] hid-led 0003:27B8:01ED.0006: hidraw5: USB HID v1.01 Device [ThingM blink(1) mk2] on usb-0000:00:1d.7-5.2/input0
[ 12.194438] hid-led 0003:27B8:01ED.0006: ThingM blink(1) initialized
[ 12.258418] usb 2-5.3: new full-speed USB device number 8 using ehci-pci
[ 12.340001] usb 2-5.3: New USB device found, idVendor=1111, idProduct=1111, bcdDevice= 2.10
[ 12.340005] usb 2-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 12.340008] usb 2-5.3: Product: Ergo Pro Keyboard
[ 12.340010] usb 2-5.3: Manufacturer: Matias
[ 12.342136] input: Matias Ergo Pro Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.3/2-5.3:1.0/0003:1111:1111.0007/input/input13
[ 12.393772] hid-generic 0003:1111:1111.0007: input,hidraw6: USB HID v1.00 Keyboard [Matias Ergo Pro Keyboard] on usb-0000:00:1d.7-5.3/input0
[ 12.395784] input: Matias Ergo Pro Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.3/2-5.3:1.1/0003:1111:1111.0008/input/input14
[ 12.447506] input: Matias Ergo Pro Keyboard System Control as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.3/2-5.3:1.1/0003:1111:1111.0008/input/input15
[ 12.447682] hid-generic 0003:1111:1111.0008: input,hidraw7: USB HID v1.00 Device [Matias Ergo Pro Keyboard] on usb-0000:00:1d.7-5.3/input1
[ 12.469429] urandom_read: 2 callbacks suppressed
[ 12.469433] random: cryptsetup: uninitialized urandom read (4 bytes read)
[ 12.473164] random: cryptsetup: uninitialized urandom read (4 bytes read)
[ 24.199391] random: crng init done
[ 27.570870] XFS (dm-1): Mounting V5 Filesystem
[ 27.638552] XFS (dm-1): Ending clean mount
[ 27.641705] xfs filesystem being mounted at /new_root supports timestamps until 2038 (0x7fffffff)
[ 28.344806] udevd[610]: starting version 3.2.9
[ 28.377497] udevd[610]: starting eudev-3.2.9
[ 29.243759] XFS (dm-2): mounting with "discard" option, but the device does not support discard
[ 29.243902] XFS (dm-2): Mounting V5 Filesystem
[ 29.295940] XFS (dm-2): Ending clean mount
[ 29.300696] xfs filesystem being mounted at /home supports timestamps until 2038 (0x7fffffff)
[ 29.301310] XFS (md0): Mounting V5 Filesystem
[ 29.443899] XFS (md0): Ending clean mount
[ 29.445815] xfs filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 29.684009] elogind[1230]: New seat seat0.
[ 29.685310] elogind[1230]: Watching system buttons on /dev/input/event0 (Power Button)
[ 29.685535] elogind[1230]: Watching system buttons on /dev/input/event2 (HID 046a:0023)
[ 29.685631] elogind[1230]: Watching system buttons on /dev/input/event3 (HID 046a:0023 Consumer Control)
[ 29.685725] elogind[1230]: Watching system buttons on /dev/input/event4 (HID 046a:0023 System Control)
[ 29.685824] elogind[1230]: Watching system buttons on /dev/input/event8 (Logitech Gaming Mouse G502 System Control)
[ 29.685923] elogind[1230]: Watching system buttons on /dev/input/event6 (Logitech Gaming Mouse G502 Keyboard)
[ 29.686024] elogind[1230]: Watching system buttons on /dev/input/event7 (Logitech Gaming Mouse G502 Consumer Control)
[ 29.686119] elogind[1230]: Watching system buttons on /dev/input/event9 (Matias Ergo Pro Keyboard)
[ 29.686332] elogind[1230]: Watching system buttons on /dev/input/event11 (Matias Ergo Pro Keyboard System Control)
[ 30.383083] ATL1E 0000:05:00.0 eth0: NIC Link is Up <1000 Mbps Full Duplex>
[ 30.383096] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 49.458824] hwmon hwmon2: fan1 low limit and alarm disabled
[ 49.458926] hwmon hwmon2: fan4 low limit and alarm disabled
[ 58.919268] elogind[1230]: New session c1 of user stefan.
[ 162.720433] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 164.596717] ata4.00: ATA-8: KINGSTON SH103S3240G, 521ABBF0, max UDMA/133
[ 164.596722] ata4.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 164.606559] ata4.00: configured for UDMA/133
[ 164.606663] scsi 4:0:0:0: Direct-Access ATA KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5
[ 164.609562] sd 4:0:0:0: Attached scsi generic sg7 type 0
[ 164.609617] sd 4:0:0:0: [sdh] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 164.609633] sd 4:0:0:0: [sdh] Write Protect is off
[ 164.609636] sd 4:0:0:0: [sdh] Mode Sense: 00 3a 00 00
[ 164.609662] sd 4:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 164.655424] sdh: sdh1 sdh2
[ 164.655664] sd 4:0:0:0: [sdh] Attached SCSI disk
[ 216.231584] sdh: sdh1 sdh2
[ 242.445844] sdh: sdh1 sdh2
[ 298.890146] XFS (dm-3): Mounting V5 Filesystem
[ 298.939660] XFS (dm-3): Ending clean mount
[ 298.941559] xfs filesystem being mounted at /mnt/build supports timestamps until 2038 (0x7fffffff)
[ 352.925282] elogind[1230]: New session c2 of user root.
[ 352.977402] elogind[1230]: Removed session c2.
[ 353.030445] elogind[1230]: New session c3 of user root.
[ 353.084292] elogind[1230]: Removed session c3.
[ 353.137585] elogind[1230]: New session c4 of user root.
[ 353.188991] elogind[1230]: Removed session c4.
[ 353.241683] elogind[1230]: New session c5 of user root.
[ 353.298212] elogind[1230]: Removed session c5.
[ 641.576615] elogind[1230]: New session c6 of user root.
[ 641.628368] elogind[1230]: Removed session c6.
[ 641.680526] elogind[1230]: New session c7 of user root.
[ 641.733677] elogind[1230]: Removed session c7.
[ 641.786674] elogind[1230]: New session c8 of user root.
[ 641.838610] elogind[1230]: Removed session c8.
[ 641.891732] elogind[1230]: New session c9 of user root.