blob: e98e3cd7c152bbee915a5565cd72a81fa5f288b8 [file] [log] [blame]
[ 0.000000] random: get_random_bytes called from start_kernel+0x30/0x39c with crng_init=0
[ 0.000000] Linux version 4.13.0-0.bpo.1-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 SMP Debian 4.13.13-1~bpo9+1 (2017-11-22)
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001ff9f000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUS P2-99/P2-99, BIOS 4.6-2379-g0cc28d7e61 12/15/2017
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1ff9f max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 0C0000000 mask FE0000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] initial memory mapped: [mem 0x00000000-0x03dfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x039b4000, 0x039b4fff] PGTABLE
[ 0.000000] BRK [0x039b5000, 0x039b6fff] PGTABLE
[ 0.000000] BRK [0x039b7000, 0x039b7fff] PGTABLE
[ 0.000000] BRK [0x039b8000, 0x039b8fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1e17a000-0x1f2defff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F61B0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x000000001FFB00E0 000044 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x000000001FFB1830 0000F4 (v01 CORE COREBOOT 00000000 CORE 0000002A)
[ 0.000000] ACPI: DSDT 0x000000001FFB0280 0015B0 (v02 CORE COREBOOT 00000001 INTL 20161222)
[ 0.000000] ACPI: FACS 0x000000001FFB0240 000040
[ 0.000000] ACPI: FACS 0x000000001FFB0240 000040
[ 0.000000] ACPI: SSDT 0x000000001FFB1930 0000C3 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: TCPA 0x000000001FFB1A00 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x000000001FFB1A40 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1ff9f000
[ 0.000000] low ram: 0 - 1ff9f000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000001ff9efff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001ff9efff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ff9efff]
[ 0.000000] On node 0 totalpages: 130877
[ 0.000000] free_area_init_node: node 0, pgdat c3827f80, node_mem_map dfb1f024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1116 pages used for memmap
[ 0.000000] Normal zone: 126879 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] Found and enabled local APIC!
[ 0.000000] smpboot: Boot CPU (id 0) not listed by BIOS
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xff7fffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 22 pages/cpu @dfb06000 s61004 r0 d29108 u90112
[ 0.000000] pcpu-alloc: s61004 r0 d29108 u90112 alloc=22*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129725
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-0.bpo.1-686-pae root=UUID=faa63d1d-c382-4d5f-917f-c5c1f6196a74 ro video=1280x1024@75 iomem=relaxed
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 490568K/523508K available (5960K kernel code, 627K rwdata, 1868K rodata, 804K init, 456K bss, 32940K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd16000 - 0xfffff000 (2980 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xe079f000 - 0xff9fe000 ( 498 MB)
lowmem : 0xc0000000 - 0xdff9f000 ( 511 MB)
.init : 0xc3852000 - 0xc391b000 ( 804 kB)
.data : 0xc35d214d - 0xc3843c00 (2502 kB)
.text : 0xc3000000 - 0xc35d214d (5960 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] ftrace: allocating 27250 entries in 54 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 2304, nr_irqs: 32, preallocated irqs: 16
[ 0.000000] CPU 0 irqstacks, hard=df4a6000 soft=df4a8000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] HPET config register value = 0xFFFFFFFF. Disabling HPET
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 551.209 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 1102.41 BogoMIPS (lpj=2204836)
[ 0.008014] pid_max: default: 32768 minimum: 301
[ 0.008214] ACPI: Core revision 20170531
[ 0.013812] ACPI Error: [\_SB_.PCI0.MBRS] Namespace lookup failure, AE_NOT_FOUND (20170531/dswload-210)
[ 0.013927] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170531/psobject-252)
[ 0.014044] ACPI Exception: AE_NOT_FOUND, (SSDT:COREBOOT) while loading table (20170531/tbxfload-228)
[ 0.014142] ACPI Error: 1 table load failures, 1 successful (20170531/tbxfload-246)
[ 0.014238] ACPI: setting ELCR to 0200 (from 0e00)
[ 0.014476] Security Framework initialized
[ 0.014549] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.014711] AppArmor: AppArmor initialized
[ 0.014886] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.014974] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.016252] mce: CPU supports 5 MCE banks
[ 0.016370] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[ 0.016440] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.038391] Freeing SMP alternatives memory: 28K
[ 0.043784] smpboot: Max logical packages: 1
[ 0.043880] smpboot: SMP motherboard not detected
[ 0.043943] smpboot: SMP disabled
[ 0.044052] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.048000] Performance Events: Broken BIOS detected, complain to your hardware vendor.
[ 0.048000] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 186 is 40002e)
[ 0.048000] p6 PMU driver.
[ 0.048000] ... version: 0
[ 0.048000] ... bit width: 32
[ 0.048000] ... generic registers: 2
[ 0.048000] ... value mask: 00000000ffffffff
[ 0.048000] ... max period: 000000007fffffff
[ 0.048000] ... fixed-purpose events: 0
[ 0.048000] ... event mask: 0000000000000003
[ 0.048000] Hierarchical SRCU implementation.
[ 0.048417] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.048623] smp: Bringing up secondary CPUs ...
[ 0.048693] smp: Brought up 1 node, 1 CPU
[ 0.048758] smpboot: Total of 1 processors activated (1102.41 BogoMIPS)
[ 0.049560] devtmpfs: initialized
[ 0.051103] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.051210] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.051517] pinctrl core: initialized pinctrl subsystem
[ 0.052353] NET: Registered protocol family 16
[ 0.053531] cpuidle: using governor ladder
[ 0.053600] cpuidle: using governor menu
[ 0.053886] ACPI FADT declares the system doesn't support MSI, so disable it
[ 0.053959] ACPI: bus type PCI registered
[ 0.054025] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.054340] PCI: Using configuration type 1 for base access
[ 0.060571] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.061884] ACPI: Added _OSI(Module Device)
[ 0.061964] ACPI: Added _OSI(Processor Device)
[ 0.062029] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.062095] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.067079] ACPI: Interpreter enabled
[ 0.067240] ACPI: (supports S0 S1 S5)
[ 0.067305] ACPI: Using PIC for interrupt routing
[ 0.067445] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.088952] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.089423] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.089889] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.090355] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.090885] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.090973] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments]
[ 0.091067] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.091150] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.092089] PCI host bridge to bus 0000:00
[ 0.092166] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.092240] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.092313] pci_bus 0000:00: root bus resource [mem 0x20000000-0xffffffff]
[ 0.092386] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.092494] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
[ 0.092530] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.092913] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
[ 0.093231] pci 0000:00:04.0: [8086:7110] type 00 class 0x060100
[ 0.093600] pci 0000:00:04.1: [8086:7111] type 00 class 0x010180
[ 0.093665] pci 0000:00:04.1: reg 0x20: [io 0x1420-0x142f]
[ 0.093695] pci 0000:00:04.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.093771] pci 0000:00:04.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.093843] pci 0000:00:04.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.093914] pci 0000:00:04.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.094255] pci 0000:00:04.2: [8086:7112] type 00 class 0x0c0300
[ 0.094319] pci 0000:00:04.2: reg 0x20: [io 0x1400-0x141f]
[ 0.094611] pci 0000:00:04.3: [8086:7113] type 00 class 0x068000
[ 0.094621] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
[ 0.094828] pci 0000:00:04.3: quirk: [io 0xe400-0xe43f] claimed by PIIX4 ACPI
[ 0.094916] pci 0000:00:04.3: quirk: [io 0x0f00-0x0f0f] claimed by PIIX4 SMB
[ 0.095293] pci 0000:00:0c.0: [1106:3106] type 00 class 0x020000
[ 0.095326] pci 0000:00:0c.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.095345] pci 0000:00:0c.0: reg 0x14: [mem 0xf2110000-0xf21100ff]
[ 0.095396] pci 0000:00:0c.0: reg 0x30: [mem 0xf2100000-0xf210ffff pref]
[ 0.095451] pci 0000:00:0c.0: supports D1 D2
[ 0.095460] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.095883] pci 0000:01:00.0: [10de:0221] type 00 class 0x030000
[ 0.095917] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
[ 0.095934] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xdfffffff pref]
[ 0.095951] pci 0000:01:00.0: reg 0x18: [mem 0xf1000000-0xf1ffffff]
[ 0.096023] pci 0000:01:00.0: reg 0x30: [mem 0xf2000000-0xf201ffff pref]
[ 0.096293] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.096374] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf20fffff]
[ 0.096385] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff pref]
[ 0.096403] pci_bus 0000:00: on NUMA node 0
[ 0.100297] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.100385] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.100472] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.100536] vgaarb: loaded
[ 0.100858] EDAC MC: Ver: 3.0.0
[ 0.101601] PCI: Using ACPI for IRQ routing
[ 0.101676] PCI: pci_cache_line_size set to 32 bytes
[ 0.101738] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.101747] e820: reserve RAM buffer [mem 0x1ff9f000-0x1fffffff]
[ 0.103199] clocksource: Switched to clocksource refined-jiffies
[ 0.187238] VFS: Disk quotas dquot_6.6.0
[ 0.187456] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.188701] AppArmor: AppArmor Filesystem Enabled
[ 0.189051] pnp: PnP ACPI init
[ 0.193109] system 00:00: [io 0xe400-0xe43f] has been reserved
[ 0.193193] system 00:00: [io 0x0f00-0x0f0f] has been reserved
[ 0.193271] system 00:00: [io 0x0294-0x0297] has been reserved
[ 0.193344] system 00:00: [io 0x03f0-0x03f1] has been reserved
[ 0.193416] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.193499] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.193704] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.194904] pnp 00:02: [dma 2]
[ 0.195079] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.196850] pnp 00:03: [dma 4]
[ 0.197104] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.198246] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.199366] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.200623] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.201498] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.201521] pnp: PnP ACPI: found 8 devices
[ 0.201599] PnPBIOS: Disabled by ACPI PNP
[ 0.246492] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.246643] clocksource: Switched to clocksource acpi_pm
[ 0.246780] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.246860] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf20fffff]
[ 0.246936] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff pref]
[ 0.247031] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.247040] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.247049] pci_bus 0000:00: resource 6 [mem 0x20000000-0xffffffff]
[ 0.247058] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf20fffff]
[ 0.247067] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff pref]
[ 0.247386] NET: Registered protocol family 2
[ 0.247386] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.247386] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.247386] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.247386] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.247386] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.247386] NET: Registered protocol family 1
[ 0.247386] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.247976] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.248112] PCI: setting IRQ 11 as level-triggered
[ 0.248437] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.248524] PCI: CLS 64 bytes, default 32
[ 0.248826] Unpacking initramfs...
[ 2.493390] Freeing initrd memory: 17812K
[ 2.495421] audit: initializing netlink subsys (disabled)
[ 2.497490] audit: type=2000 audit(1513367704.495:1): state=initialized audit_enabled=0 res=1
[ 2.497666] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 2.497814] zbud: loaded
[ 3.601633] tsc: Refined TSC clocksource calibration: 551.249 MHz
[ 3.601733] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x7f228947da, max_idle_ns: 440795217959 ns
[ 10.354303] clocksource: Switched to clocksource tsc
[ 10.358299] Key type asymmetric registered
[ 10.358380] Asymmetric key parser 'x509' registered
[ 10.358525] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 10.358784] io scheduler noop registered
[ 10.358851] io scheduler deadline registered
[ 10.359012] io scheduler cfq registered (default)
[ 10.359079] io scheduler mq-deadline registered
[ 10.359668] intel_idle: does not run on family 6 model 8
[ 10.359779] GHES: HEST is not enabled!
[ 10.359928] isapnp: Scanning for PnP cards...
[ 10.714305] isapnp: No Plug & Play device found
[ 10.714726] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 10.735562] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 10.756405] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 10.757905] Linux agpgart interface v0.103
[ 10.758334] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 10.776488] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 10.777240] i8042: PNP: PS/2 Controller [PNP0303:KBD5,PNP0f13:PS25] at 0x60,0x64 irq 1,12
[ 10.779698] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 10.779791] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 10.780638] mousedev: PS/2 mouse device common for all mice
[ 10.780933] rtc_cmos 00:01: RTC can wake from S4
[ 10.781305] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 10.781415] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram
[ 10.781577] ledtrig-cpu: registered to indicate activity on CPUs
[ 10.782646] NET: Registered protocol family 10
[ 10.783863] Segment Routing with IPv6
[ 10.784174] mip6: Mobile IPv6
[ 10.784243] NET: Registered protocol family 17
[ 10.784315] mpls_gso: MPLS GSO support
[ 10.785081] microcode: sig=0x681, pf=0x1, revision=0xd
[ 10.785370] microcode: Microcode Update Driver: v2.2.
[ 10.785389] Using IPI No-Shortcut mode
[ 10.785539] sched_clock: Marking stable (10784033719, 0)->(10887096189, -103062470)
[ 10.786383] registered taskstats version 1
[ 10.786523] zswap: loaded using pool lzo/zbud
[ 10.786765] AppArmor: AppArmor sha1 policy hashing enabled
[ 10.786841] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 10.787450] rtc_cmos 00:01: setting system clock to 2017-12-15 19:55:13 UTC (1513367713)
[ 10.787656] PM: Hibernation image not present or could not be loaded.
[ 10.796026] Freeing unused kernel memory: 804K
[ 10.796741] Write protecting the kernel text: 5964k
[ 10.797057] Write protecting the kernel read-only data: 1872k
[ 10.809190] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 11.128180] FDC 0 is a post-1991 82077
[ 11.165908] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 11.166865] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 11.166938] PCI: setting IRQ 10 as level-triggered
[ 11.186546] SCSI subsystem initialized
[ 11.207466] ACPI: bus type USB registered
[ 11.207682] usbcore: registered new interface driver usbfs
[ 11.207837] usbcore: registered new interface driver hub
[ 11.220301] via-rhine 0000:00:0c.0 eth0: VIA Rhine III at 0x11000, 00:11:95:8a:d6:c4, IRQ 10
[ 11.221178] via-rhine 0000:00:0c.0 eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link c1e1
[ 11.224202] piix4_smbus 0000:00:04.3: SMBus Host Controller at 0xf00, revision 0
[ 11.225837] usbcore: registered new device driver usb
[ 11.242273] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 11.254735] uhci_hcd: USB Universal Host Controller Interface driver
[ 11.255284] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 11.255386] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 11.255488] uhci_hcd 0000:00:04.2: detected 2 ports
[ 11.255639] uhci_hcd 0000:00:04.2: irq 11, io base 0x00001400
[ 11.261672] libata version 3.00 loaded.
[ 11.264348] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 11.264441] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.264523] usb usb1: Product: UHCI Host Controller
[ 11.264590] usb usb1: Manufacturer: Linux 4.13.0-0.bpo.1-686-pae uhci_hcd
[ 11.264659] usb usb1: SerialNumber: 0000:00:04.2
[ 11.267802] hub 1-0:1.0: USB hub found
[ 11.268952] hub 1-0:1.0: 2 ports detected
[ 11.271946] ata_piix 0000:00:04.1: version 2.13
[ 11.281564] scsi host0: ata_piix
[ 11.291579] scsi host1: ata_piix
[ 11.291978] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1420 irq 14
[ 11.292152] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1428 irq 15
[ 11.467500] ata1.00: ATA-6: WDC WD400BB-00FRA0, 77.07W77, max UDMA/100
[ 11.467590] ata1.00: 78165360 sectors, multi 0: LBA48
[ 11.473947] ata1.00: configured for UDMA/33
[ 11.474631] scsi 0:0:0:0: Direct-Access ATA WDC WD400BB-00FR 7W77 PQ: 0 ANSI: 5
[ 11.532523] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.3 GiB)
[ 11.532694] sd 0:0:0:0: [sda] Write Protect is off
[ 11.532767] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 11.532889] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.586649] sda: sda1 sda2 sda3 sda4
[ 11.589824] sd 0:0:0:0: [sda] Attached SCSI disk
[ 12.176912] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2
[ 12.457517] PM: Starting manual resume from disk
[ 12.457625] PM: Hibernation image partition 8:3 present
[ 12.457629] PM: Looking for hibernation image.
[ 12.458326] PM: Image not found (code -22)
[ 12.458334] PM: Hibernation image not present or could not be loaded.
[ 12.971278] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 15.606562] random: crng init done
[ 18.746231] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 18.746391] ACPI: Power Button [PWRB]
[ 18.747110] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 18.747269] ACPI: Power Button [PWRF]
[ 18.882514] parport_pc 00:03: reported by Plug and Play ACPI
[ 18.882787] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 19.053546] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.294609] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 19.778319] ppdev: user-space parallel port driver
[ 20.267144] nouveau 0000:01:00.0: NVIDIA NV44A (04a100a1)
[ 20.551881] nouveau 0000:01:00.0: bios: version 05.44.a2.10.01
[ 20.566496] agpgart-intel 0000:00:00.0: AGP 1.0 bridge
[ 20.566610] agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode
[ 20.566706] nouveau 0000:01:00.0: putting AGP V2 device into 2x mode
[ 20.589413] nouveau 0000:01:00.0: fb: 512 MiB DDR2
[ 20.662171] [TTM] Zone kernel: Available graphics memory: 254606 kiB
[ 20.662259] [TTM] Initializing pool allocator
[ 20.662347] [TTM] Initializing DMA pool allocator
[ 20.662506] nouveau 0000:01:00.0: DRM: VRAM: 508 MiB
[ 20.662578] nouveau 0000:01:00.0: DRM: GART: 256 MiB
[ 20.662658] nouveau 0000:01:00.0: DRM: TMDS table version 1.1
[ 20.662731] nouveau 0000:01:00.0: DRM: DCB version 3.0
[ 20.662806] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000300 00000028
[ 20.662883] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011310 00000028
[ 20.662958] nouveau 0000:01:00.0: DRM: DCB outp 02: 01011312 00000000
[ 20.663033] nouveau 0000:01:00.0: DRM: DCB outp 03: 020223f1 00c0c080
[ 20.663109] nouveau 0000:01:00.0: DRM: DCB conn 00: 0000
[ 20.663179] nouveau 0000:01:00.0: DRM: DCB conn 01: 2230
[ 20.663250] nouveau 0000:01:00.0: DRM: DCB conn 02: 0110
[ 20.663320] nouveau 0000:01:00.0: DRM: DCB conn 03: 0111
[ 20.663391] nouveau 0000:01:00.0: DRM: DCB conn 04: 0113
[ 20.666401] nouveau 0000:01:00.0: DRM: Saving VGA fonts
[ 20.736631] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 20.736722] [drm] Driver supports precise vblank timestamp query.
[ 20.752860] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[ 20.753008] nouveau 0000:01:00.0: DRM: Setting dpms mode 3 on TV encoder (output 3)
[ 20.861054] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x9000, bo df3da800
[ 20.896199] fbcon: nouveaufb (fb0) is primary device
[ 21.049512] Console: switching to colour frame buffer device 160x64
[ 21.055935] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 21.056260] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 25.201916] Adding 2620412k swap on /dev/sda3. Priority:-1 extents:1 across:2620412k FS
[ 25.367736] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 30.819394] input: PC Speaker as /devices/platform/pcspkr/input/input5