blob: e0f18c76391415e8862f2477220e7051380cab28 [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.14-smp (root@hive) (gcc version 5.3.0 (GCC) ) #2 SMP Fri Jun 24 14:44:24 CDT 2016
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff7efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001ff7f000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: ASUS P2B-LS/P2B-LS, BIOS 4.11-839-g11c5b3b180 01/10/2020
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1ff7f max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 0F0000000 mask FFF800000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] initial memory mapped: [mem 0x00000000-0x027fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x0224c000, 0x0224cfff] PGTABLE
[ 0.000000] BRK [0x0224d000, 0x0224efff] PGTABLE
[ 0.000000] BRK [0x0224f000, 0x0224ffff] PGTABLE
[ 0.000000] BRK [0x02250000, 0x02250fff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6750 000024 (v02 COREv4)
[ 0.000000] ACPI: XSDT 0x000000001FF800E0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20191018)
[ 0.000000] ACPI: FACP 0x000000001FF818A0 0000F4 (v01 COREv4 COREBOOT 00000000 CORE 20191018)
[ 0.000000] ACPI: DSDT 0x000000001FF80280 001611 (v02 COREv4 COREBOOT 00000001 INTL 20191018)
[ 0.000000] ACPI: FACS 0x000000001FF80240 000040
[ 0.000000] ACPI: FACS 0x000000001FF80240 000040
[ 0.000000] ACPI: SSDT 0x000000001FF819A0 0000C3 (v02 COREv4 COREBOOT 0000002A CORE 20191018)
[ 0.000000] ACPI: HPET 0x000000001FF81A70 000038 (v01 COREv4 COREBOOT 00000000 CORE 20191018)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ff7efff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1ff7d000-0x1ff7efff]
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] max_low_pfn = 1ff7f, highstart_pfn = 1ff7f
[ 0.000000] Low memory ends at vaddr dff7f000
[ 0.000000] High memory starts at vaddr dff7f000
[ 0.000000] mapped low ram: 0 - 1ff7f000
[ 0.000000] low ram: 0 - 1ff7f000
[ 0.000000] Node: 0, start_pfn: 1, end_pfn: 9f
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 0
[ 0.000000] Node: 0, start_pfn: 100, end_pfn: 1ff7f
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000001ff7efff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001ff7efff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ff7efff]
[ 0.000000] On node 0 totalpages: 130845
[ 0.000000] free_area_init_node: node 0, pgdat dff7d000, node_mem_map dfa7d028
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1239 pages used for memmap
[ 0.000000] Normal zone: 126847 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Found and enabled local APIC!
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xff7fffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 18 pages/cpu @dfa67000 s42636 r0 d31092 u73728
[ 0.000000] pcpu-alloc: s42636 r0 d31092 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129566
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=Linux ro root=801 vt.default_utf8=0
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 498944K/523380K available (12341K kernel code, 927K rwdata, 3824K rodata, 832K init, 676K bss, 24436K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd37000 - 0xfffff000 (2848 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xe077f000 - 0xff9fe000 ( 498 MB)
lowmem : 0xc0000000 - 0xdff7f000 ( 511 MB)
.init : 0xc20b4000 - 0xc2184000 ( 832 kB)
.data : 0xc1c0d8e3 - 0xc20b2d80 (4757 kB)
.text : 0xc1000000 - 0xc1c0d8e3 (12342 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:32 16
[ 0.000000] CPU 0 irqstacks, hard=df424000 soft=df426000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] HPET config register value = 0xFFFFFFFF. Disabling HPET
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1329.848 MHz processor
[ 0.002007] Calibrating delay loop (skipped), value calculated using timer frequency.. 2659.69 BogoMIPS (lpj=1329848)
[ 0.002260] pid_max: default: 32768 minimum: 301
[ 0.002410] ACPI: Core revision 20150930
[ 0.006014] ACPI Error: [\_SB_.PCI0.MBRS] Namespace lookup failure, AE_NOT_FOUND (20150930/dswload-210)
[ 0.006337] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20150930/psobject-227)
[ 0.006622] ACPI Exception: AE_NOT_FOUND, (SSDT:COREBOOT) while loading table (20150930/tbxfload-193)
[ 0.006896] ACPI Error: 1 table load failures, 1 successful (20150930/tbxfload-214)
[ 0.007007] ACPI: setting ELCR to 0200 (from 0000)
[ 0.007182] Security Framework initialized
[ 0.007326] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.007455] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.008469] Initializing cgroup subsys io
[ 0.008619] Initializing cgroup subsys memory
[ 0.008773] Initializing cgroup subsys devices
[ 0.008907] Initializing cgroup subsys freezer
[ 0.009022] Initializing cgroup subsys net_cls
[ 0.009153] Initializing cgroup subsys perf_event
[ 0.009283] Initializing cgroup subsys net_prio
[ 0.009412] Initializing cgroup subsys pids
[ 0.009613] mce: CPU supports 5 MCE banks
[ 0.009768] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[ 0.009897] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.028616] Freeing SMP alternatives memory: 40K (c2184000 - c218e000)
[ 0.028772] ftrace: allocating 41039 entries in 81 pages
[ 0.054455] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.054600] smpboot: SMP motherboard not detected
[ 0.055029] smpboot: SMP disabled
[ 0.055157] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.056000] Performance Events: p6 PMU driver.
[ 0.056000] ... version: 0
[ 0.056000] ... bit width: 32
[ 0.056000] ... generic registers: 2
[ 0.056000] ... value mask: 00000000ffffffff
[ 0.056000] ... max period: 000000007fffffff
[ 0.056000] ... fixed-purpose events: 0
[ 0.056000] ... event mask: 0000000000000003
[ 0.056766] x86: Booted up 1 node, 1 CPUs
[ 0.056905] smpboot: Total of 1 processors activated (2659.69 BogoMIPS)
[ 0.057432] devtmpfs: initialized
[ 0.058941] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.059271] xor: measuring software checksum speed
[ 0.069006] pIII_sse : 2784.000 MB/sec
[ 0.079006] prefetch64-sse: 2960.000 MB/sec
[ 0.079126] xor: using function: prefetch64-sse (2960.000 MB/sec)
[ 0.079285] atomic64_test: passed for i586+ platform with CX8 and with SSE
[ 0.079413] pinctrl core: initialized pinctrl subsystem
[ 0.080244] NET: Registered protocol family 16
[ 0.080981] cpuidle: using governor ladder
[ 0.081019] cpuidle: using governor menu
[ 0.081417] ACPI FADT declares the system doesn't support MSI, so disable it
[ 0.081545] ACPI: bus type PCI registered
[ 0.081668] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.082910] PCI: PCI BIOS revision 2.10 entry at 0xffa40, last bus=1
[ 0.083007] PCI: Using configuration type 1 for base access
[ 0.115012] raid6: mmxx1 gen() 1265 MB/s
[ 0.132026] raid6: mmxx2 gen() 1496 MB/s
[ 0.149029] raid6: sse1x1 gen() 1121 MB/s
[ 0.166039] raid6: sse1x2 gen() 1500 MB/s
[ 0.166162] raid6: using algorithm sse1x2 gen() 1500 MB/s
[ 0.166285] raid6: using intx1 recovery algorithm
[ 0.166625] ACPI: Added _OSI(Module Device)
[ 0.166749] ACPI: Added _OSI(Processor Device)
[ 0.166871] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.166994] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.169789] ACPI: Interpreter enabled
[ 0.169933] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.170129] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.170405] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150930/hwxface-580)
[ 0.170678] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20150930/hwxface-580)
[ 0.171019] ACPI: (supports S0 S5)
[ 0.171138] ACPI: Using PIC for interrupt routing
[ 0.171307] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.177929] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.178709] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.179467] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.180152] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.181080] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.181219] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments]
[ 0.182018] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.182153] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.183373] PCI host bridge to bus 0000:00
[ 0.183507] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.183635] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.183763] pci_bus 0000:00: root bus resource [mem 0x20000000-0xffffffff]
[ 0.183894] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.184028] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
[ 0.184051] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.184253] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
[ 0.184396] pci 0000:00:04.0: [8086:7110] type 00 class 0x060100
[ 0.184598] pci 0000:00:04.1: [8086:7111] type 00 class 0x010180
[ 0.184643] pci 0000:00:04.1: reg 0x20: [io 0x1440-0x144f]
[ 0.184665] pci 0000:00:04.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.184798] pci 0000:00:04.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.185010] pci 0000:00:04.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.185136] pci 0000:00:04.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.185395] pci 0000:00:04.2: [8086:7112] type 00 class 0x0c0300
[ 0.185442] pci 0000:00:04.2: reg 0x20: [io 0x1400-0x141f]
[ 0.185589] pci 0000:00:04.3: [8086:7113] type 00 class 0x068000
[ 0.185598] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
[ 0.185973] pci 0000:00:04.3: quirk: [io 0xe400-0xe43f] claimed by PIIX4 ACPI
[ 0.186011] pci 0000:00:04.3: quirk: [io 0x0f00-0x0f0f] claimed by PIIX4 SMB
[ 0.186291] pci 0000:00:06.0: [9005:001f] type 00 class 0x010000
[ 0.186315] pci 0000:00:06.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.186332] pci 0000:00:06.0: reg 0x14: [mem 0xf0a34000-0xf0a34fff 64bit]
[ 0.186362] pci 0000:00:06.0: reg 0x30: [mem 0xf0a00000-0xf0a1ffff pref]
[ 0.186503] pci 0000:00:07.0: [8086:1229] type 00 class 0x020000
[ 0.186527] pci 0000:00:07.0: reg 0x10: [mem 0xf0a35000-0xf0a35fff pref]
[ 0.186539] pci 0000:00:07.0: reg 0x14: [io 0x1420-0x143f]
[ 0.186551] pci 0000:00:07.0: reg 0x18: [mem 0xf0800000-0xf08fffff]
[ 0.186580] pci 0000:00:07.0: reg 0x30: [mem 0xf0900000-0xf09fffff pref]
[ 0.186607] pci 0000:00:07.0: supports D1 D2
[ 0.186613] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.186761] pci 0000:00:09.0: [102b:0519] type 00 class 0x030000
[ 0.186780] pci 0000:00:09.0: reg 0x10: [mem 0xf0a30000-0xf0a33fff]
[ 0.186792] pci 0000:00:09.0: reg 0x14: [mem 0xf0000000-0xf07fffff pref]
[ 0.187034] pci 0000:00:09.0: reg 0x30: [mem 0xf0a20000-0xf0a2ffff pref]
[ 0.187270] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.187410] pci_bus 0000:00: on NUMA node 0
[ 0.189230] vgaarb: setting as boot device: PCI:0000:00:09.0
[ 0.189371] vgaarb: device added: PCI:0000:00:09.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.189542] vgaarb: loaded
[ 0.189639] vgaarb: bridge control possible 0000:00:09.0
[ 0.190148] SCSI subsystem initialized
[ 0.190424] libata version 3.00 loaded.
[ 0.190471] ACPI: bus type USB registered
[ 0.190650] usbcore: registered new interface driver usbfs
[ 0.190782] usbcore: registered new interface driver hub
[ 0.190923] usbcore: registered new device driver usb
[ 0.191351] PCI: Using ACPI for IRQ routing
[ 0.191485] PCI: pci_cache_line_size set to 32 bytes
[ 0.191528] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.191534] e820: reserve RAM buffer [mem 0x1ff7f000-0x1fffffff]
[ 0.192339] clocksource: Switched to clocksource refined-jiffies
[ 0.233440] pnp: PnP ACPI init
[ 0.234280] system 00:00: [io 0xe400-0xe43f] has been reserved
[ 0.234417] system 00:00: [io 0x0f00-0x0f0f] has been reserved
[ 0.234546] system 00:00: [io 0x0294-0x0297] has been reserved
[ 0.234671] system 00:00: [io 0x03f0-0x03f1] has been reserved
[ 0.234796] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.234932] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.235081] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.235608] pnp 00:02: [dma 2]
[ 0.235690] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.236439] pnp 00:03: [dma 4]
[ 0.236554] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.237074] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.237578] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.238123] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.238502] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.238516] pnp: PnP ACPI: found 8 devices
[ 0.278104] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.278367] clocksource: Switched to clocksource acpi_pm
[ 0.278538] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.278679] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.278685] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.278691] pci_bus 0000:00: resource 6 [mem 0x20000000-0xffffffff]
[ 0.278798] NET: Registered protocol family 2
[ 0.279207] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.279390] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.279600] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.279840] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.279990] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.280363] NET: Registered protocol family 1
[ 0.280803] RPC: Registered named UNIX socket transport module.
[ 0.280937] RPC: Registered udp transport module.
[ 0.281104] RPC: Registered tcp transport module.
[ 0.281226] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.281380] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.281969] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.282129] PCI: setting IRQ 11 as level-triggered
[ 0.282328] pci 0000:00:07.0: Firmware left e100 interrupts enabled; disabling
[ 0.282550] pci 0000:00:09.0: Video device with shadowed ROM
[ 0.282556] PCI: CLS 64 bytes, default 32
[ 0.284311] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.284509] audit: initializing netlink subsys (disabled)
[ 0.284679] audit: type=2000 audit(1578686226.283:1): initialized
[ 0.285173] Initialise system trusted keyring
[ 0.291288] VFS: Disk quotas dquot_6.6.0
[ 0.291548] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.293493] NFS: Registering the id_resolver key type
[ 0.293661] Key type id_resolver registered
[ 0.293783] Key type id_legacy registered
[ 0.293916] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.294641] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.294956] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.295368] JFS: nTxBlock = 3898, nTxLock = 31186
[ 0.302505] SGI XFS with ACLs, security attributes, no debug enabled
[ 0.303985] ocfs2: Registered cluster interface o2cb
[ 0.304333] OCFS2 User DLM kernel interface loaded
[ 0.310309] async_tx: api initialized (async)
[ 0.310549] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.310881] io scheduler noop registered
[ 0.311100] io scheduler deadline registered
[ 0.311269] io scheduler cfq registered (default)
[ 0.311707] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.311849] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.312058] intel_idle: does not run on family 6 model 11
[ 0.312116] GHES: HEST is not enabled!
[ 0.312285] isapnp: Scanning for PnP cards...
[ 0.669259] isapnp: No Plug & Play device found
[ 0.673295] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.694087] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.714996] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.718671] Floppy drive(s): fd0 is 1.44M
[ 0.728308] brd: module loaded
[ 0.728462] HP CISS Driver (v 3.6.26)
[ 0.729720] fnic: Cisco FCoE HBA Driver, ver 1.6.0.17a
[ 0.730111] fnic: Successfully Initialized Trace Buffer
[ 0.731288] fnic: Successfully Initialized FC_CTLR Trace Buffer
[ 0.733379] FDC 0 is a post-1991 82077
[ 1.284045] tsc: Refined TSC clocksource calibration: 1329.938 MHz
[ 1.284193] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x132b9768e7a, max_idle_ns: 440795270036 ns
[ 2.284112] clocksource: Switched to clocksource tsc
[ 15.948031] scsi host2: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec aic7890/91 Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 19.797498] Adaptec aacraid driver 1.2-1[41010]-ms
[ 19.797681] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 19.798073] scsi: <fdomain> Detection failed (no card)
[ 19.798212] sym53c416.c: Version 1.0.0-ac
[ 19.798368] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
[ 19.798583] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.26-k.
[ 19.798953] Emulex LightPulse Fibre Channel SCSI driver 11.0.0.0.
[ 19.799102] Copyright(c) 2004-2015 Emulex. All rights reserved.
[ 19.799432] Brocade BFA FC/FCOE SCSI driver - version: 3.2.23.0
[ 19.821021] Failed initialization of WD-7000 SCSI card!
[ 19.891965] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 19.892275] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 19.892440] megasas: 06.808.16.00-rc1
[ 19.892632] mpt3sas version 09.102.00.00 loaded
[ 19.892976] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 19.893230] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 19.893394] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 19.893640] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[ 19.893885] ipr: IBM Power RAID SCSI Device Driver version: 2.6.3 (October 17, 2015)
[ 19.894147] RocketRAID 3xxx/4xxx Controller driver v1.10.0
[ 19.894299] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[ 19.894611] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 19.895409] ata_piix 0000:00:04.1: version 2.13
[ 19.896507] scsi host3: ata_piix
[ 19.896886] scsi host4: ata_piix
[ 19.897174] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1440 irq 14
[ 19.897303] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1448 irq 15
[ 19.900088] Fusion MPT base driver 3.04.20
[ 19.900219] Copyright (c) 1999-2008 LSI Corporation
[ 19.900354] Fusion MPT SPI Host driver 3.04.20
[ 19.900522] Fusion MPT FC Host driver 3.04.20
[ 19.900703] Fusion MPT SAS Host driver 3.04.20
[ 19.900881] Fusion MPT misc device (ioctl) driver 3.04.20
[ 19.901168] mptctl: Registered with Fusion MPT base driver
[ 19.901299] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 19.901429] Fusion MPT LAN driver 3.04.20
[ 19.901799] i8042: PNP: PS/2 Controller [PNP0303:KBD5,PNP0f13:PS25] at 0x60,0x64 irq 1,12
[ 19.904385] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 19.904526] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 19.905088] mousedev: PS/2 mouse device common for all mice
[ 19.905384] rtc_cmos 00:01: RTC can wake from S4
[ 19.905729] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 19.905897] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram
[ 19.906097] md: linear personality registered for level -1
[ 19.906223] md: raid0 personality registered for level 0
[ 19.906349] md: raid1 personality registered for level 1
[ 19.906472] md: raid10 personality registered for level 10
[ 19.906770] md: raid6 personality registered for level 6
[ 19.906895] md: raid5 personality registered for level 5
[ 19.907040] md: raid4 personality registered for level 4
[ 19.907177] md: multipath personality registered for level -4
[ 19.907458] device-mapper: uevent: version 1.0.3
[ 19.907795] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 19.908424] input: Speakup as /devices/virtual/input/input1
[ 19.908769] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[ 19.908941] speakup 3.1.6: initialized
[ 19.909079] synth name on entry is: (null)
[ 19.909528] Initializing XFRM netlink socket
[ 19.909647] NET: Registered protocol family 17
[ 19.909832] 9pnet: Installing 9P2000 support
[ 19.910033] Key type dns_resolver registered
[ 19.910825] microcode: CPU0 sig=0x6b1, pf=0x10, revision=0x0
[ 19.911086] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 19.911373] Using IPI No-Shortcut mode
[ 19.911895] registered taskstats version 1
[ 19.912058] Loading compiled-in X.509 certificates
[ 19.913588] Btrfs loaded
[ 19.914581] Key type encrypted registered
[ 19.929240] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 20.064448] ata1.00: ATA-7: Maxtor 6E040L0, NAR61590, max UDMA/133
[ 20.064593] ata1.00: 80293248 sectors, multi 0: LBA
[ 20.070320] ata1.00: configured for UDMA/33
[ 20.070851] scsi 3:0:0:0: Direct-Access ATA Maxtor 6E040L0 1590 PQ: 0 ANSI: 5
[ 20.071844] sd 3:0:0:0: [sda] 80293248 512-byte logical blocks: (41.1 GB/38.3 GiB)
[ 20.072242] sd 3:0:0:0: [sda] Write Protect is off
[ 20.072373] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.072429] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.104603] sda: sda1 sda2 < sda5 >
[ 20.105696] sd 3:0:0:0: [sda] Attached SCSI disk
[ 20.106080] md: Waiting for all devices to be available before autodetect
[ 20.106210] md: If you don't use raid, use raid=noautodetect
[ 20.106910] md: Autodetecting RAID arrays.
[ 20.107081] md: Scanned 0 and added 0 devices.
[ 20.107206] md: autorun ...
[ 20.107330] md: ... autorun DONE.
[ 20.140119] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[ 20.173410] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 20.173685] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 20.217608] devtmpfs: mounted
[ 20.221561] Freeing unused kernel memory: 832K (c20b4000 - c2184000)
[ 20.222202] Write protecting the kernel text: 12344k
[ 20.222519] Write protecting the kernel read-only data: 3828k
[ 20.749955] random: nonblocking pool is initialized
[ 21.502697] loop: module loaded
[ 23.302267] udevd[527]: starting eudev-3.1.5
[ 23.887594] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 23.887837] ACPI: Power Button [PWRB]
[ 23.888158] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 23.888383] ACPI: Power Button [PWRF]
[ 24.101916] parport_pc 00:03: reported by Plug and Play ACPI
[ 24.102516] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 24.303961] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 24.304144] e100: Copyright(c) 1999-2006 Intel Corporation
[ 24.304778] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 24.304916] PCI: setting IRQ 10 as level-triggered
[ 24.327828] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 24.345526] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 24.361425] e100 0000:00:07.0 eth0: addr 0xf0a35000, irq 10, MAC addr 00:e0:18:98:11:15
[ 24.426342] piix4_smbus 0000:00:04.3: SMBus Host Controller at 0xf00, revision 0
[ 24.464483] ehci-pci: EHCI PCI platform driver
[ 24.474998] Linux agpgart interface v0.103
[ 24.502390] uhci_hcd: USB Universal Host Controller Interface driver
[ 24.506643] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 24.507505] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 24.507776] uhci_hcd 0000:00:04.2: irq 11, io base 0x00001400
[ 24.508202] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 24.508341] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 24.508557] usb usb1: Product: UHCI Host Controller
[ 24.508684] usb usb1: Manufacturer: Linux 4.4.14-smp uhci_hcd
[ 24.508812] usb usb1: SerialNumber: 0000:00:04.2
[ 24.510268] hub 1-0:1.0: USB hub found
[ 24.510429] hub 1-0:1.0: 2 ports detected
[ 24.515251] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 24.544270] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 24.695344] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 26.023543] ppdev: user-space parallel port driver
[ 26.777731] Adding 522236k swap on /dev/sda5. Priority:-1 extents:1 across:522236k
[ 26.904482] fuse init (API version 7.23)
[ 28.025177] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 37.291300] e100 0000:00:07.0 eth0: NIC Link is Up 100 Mbps Full Duplex
[ 40.979642] NET: Registered protocol family 10