blob: 0e01d9e7e4f260c2b1c5c62bdd4f6682a0761c29 [file] [log] [blame]
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 main-c255758-g14a16fd3e7e: Fri Jan 8 18:11:09 CET 2021
root@mx500:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-rc2-0-g43ff75f2c3f)
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): text 80x25
CPU: AMD A8-5500 APU with Radeon(tm) HD Graphics (3194.25-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x610f01 Family=0x15 Model=0x10 Stepping=1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
Structured Extended Features=0x8<BMI1>
AMD Extended Feature Extensions ID EBX=0x1000<IBPB>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
TSC: P-state invariant, performance statistics
real memory = 10720641024 (10224 MB)
avail memory = 7674589184 (7319 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <COREv4 COREBOOT>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
Launching APs: 3 1 2
Timecounter "TSC-low" frequency 1597125597 Hz quality 1000
random: entropy device external interface
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd1 at kbdmux0
000.000045 [4346] netmap_init netmap: loaded module
[ath_hal] loaded
nexus0
vtvga0: <VT VGA driver>
cryptosoft0: <software crypto>
acpi0: <COREv4 COREBOOT>
acpi0: Power Button (fixed)
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
apei0: <ACPI Platform Error Interface> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x818-0x81b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: could not evaluate _ADR - AE_NOT_FOUND
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xe0000000-0xefffffff,0xf0280000-0xf02bffff at device 1.0 on pci0
vgapci0: Boot video device
hdac0: <ATI (0x9902) HDA Controller> mem 0xf02c0000-0xf02c3fff at device 1.1 on pci0
hdac0: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac0 attach returned 6
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf02c8000-0xf02c9fff at device 16.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xf02ca000-0xf02cbfff at device 16.1 on pci0
xhci1: 32 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD Hudson-2 AHCI SATA controller> port 0x2410-0x2417,0x2420-0x2423,0x2418-0x241f,0x2424-0x2427,0x2400-0x240f mem 0xf02cf000-0xf02cf7ff at device 17.0 on pci0
ahci0: AHCI v1.30 with 8 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ohci0: <AMD FCH USB Controller> mem 0xf02cc000-0xf02ccfff at device 18.0 on pci0
usbus2 on ohci0
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <AMD FCH USB 2.0 controller> mem 0xf02d0000-0xf02d00ff at device 18.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
ohci1: <AMD FCH USB Controller> mem 0xf02cd000-0xf02cdfff at device 19.0 on pci0
usbus4 on ohci1
usbus4: 12Mbps Full Speed USB v1.0
ehci1: <AMD FCH USB 2.0 controller> mem 0xf02d1000-0xf02d10ff at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
usbus5: 480Mbps High Speed USB v2.0
hdac0: <AMD Hudson-2 HDA Controller> mem 0xf02c4000-0xf02c7fff at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci1: <ACPI PCI bus> on pcib1
ohci2: <OHCI (generic) USB controller> mem 0xf02ce000-0xf02cefff at device 20.5 on pci0
usbus6 on ohci2
usbus6: 12Mbps Full Speed USB v1.0
pcib2: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pcib3: failed to allocate initial I/O port window: 0x1000-0x1fff
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xf0104000-0xf0104fff,0xf0100000-0xf0103fff at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x48000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 50:46:5d:0a:9e:26
re0: netmap queues/slots: TX 1/256, RX 1/256
acpi_tz0: <Thermal Zone> on acpi0
orm0: <ISA Option ROM> at iomem 0xed800-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen3.1: <AMD EHCI root HUB> at usbus3
ugen0.1: <0x1022 XHCI root HUB> at usbus0
ugen1.1: <0x1022 XHCI root HUB> at usbus1
ugen6.1: <AMD OHCI root HUB> at usbus6
uhub0 on usbus3
uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub1 on usbus0
uhub2 on usbus6
uhub3 on usbus1
uhub3: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen2.1: <AMD OHCI root HUB> at usbus2
ugen5.1: <AMD EHCI root HUB> at usbus5
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub4 on usbus2
uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC887 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa0
pcm3: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa0
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:mx500/ROOT/default []...
Root mount waiting for: usbus0 usbus1 CAM usbus2 usbus3 usbus4 usbus5 usbus6
uhub5 on usbus5
uhub5: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen4.1: <AMD OHCI root HUB> at usbus4
uhub6 on usbus4
uhub6: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <CT1000MX500SSD1 M3CR023> ACS-3 ATA SATA 3.x device
ada0: Serial Number 1947E2289F2A
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <CT1000MX500SSD1 M3CR023> ACS-3 ATA SATA 3.x device
ada1: Serial Number 1947E228BDFD
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
uhub2: 2 ports with 2 removable, self powered
uhub4: 5 ports with 5 removable, self powered
uhub3: 4 ports with 4 removable, self powered
uhub6: 5 ports with 5 removable, self powered
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: usbus3 usbus5
uhub0: 5 ports with 5 removable, self powered
uhub5: 5 ports with 5 removable, self powered
CPU: AMD A8-5500 APU with Radeon(tm) HD Graphics (3194.25-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x610f01 Family=0x15 Model=0x10 Stepping=1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
Structured Extended Features=0x8<BMI1>
AMD Extended Feature Extensions ID EBX=0x1000<IBPB>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
TSC: P-state invariant, performance statistics
lo0: link state changed to UP
re0: link state changed to DOWN
hdac1: <ATI (0x9902) HDA Controller> mem 0xf02c0000-0xf02c3fff at device 1.1 on pci0
hdac1: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac1 attach returned 6
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
ugen1.2: <Manufacturer Realtek RTL8191S WLAN Adapter> at usbus1
rsu0 on uhub3
rsu0: <Manufacturer Realtek RTL8191S WLAN Adapter, class 0/0, rev 2.00/2.00, addr 1> on usbus1
rsu0: MAC/BB RTL8712 cut 3 1T2R ('green')
rsu0: rsu_attach: enabling 11n
wlan1: Ethernet address: 00:e0:4c:72:00:03
wlan1: link state changed to UP
ugen1.2: <Manufacturer Realtek RTL8191S WLAN Adapter> at usbus1 (disconnected)
rsu0: at uhub3, port 4, addr 1 (disconnected)
wlan1: link state changed to DOWN
rsu0: detached
ugen1.2: <Manufacturer Realtek RTL8191S WLAN Adapter> at usbus1
rsu0 on uhub3
rsu0: <Manufacturer Realtek RTL8191S WLAN Adapter, class 0/0, rev 2.00/2.00, addr 1> on usbus1
rsu0: MAC/BB RTL8712 cut 3 1T2R ('green')
rsu0: rsu_attach: enabling 11n
wlan1: Ethernet address: 00:e0:4c:72:00:03
wlan1: link state changed to UP