blob: e29f81080af647c901421b0c7db715e8f0be2b8f [file] [log] [blame]
[ 0.000000] Linux version 5.3.6-artix1-1-ARTIX (builduser@orion) (gcc version 9.2.0 (GCC)) #1 SMP PREEMPT Sun Oct 13 15:42:39 UTC 2019
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda1 rw net.ifnames=0 iomem=relaxed quiet resume=UUID=6be78740-528b-47a6-b3fb-41e95e99fe10
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfb1ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfb20000-0x00000000bfc87fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfc88000-0x00000000bfce1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfce2000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: ASUS AM1I-A/AM1I-A, BIOS 4.10-1402-gfb2a9d5ed8 11/06/2019
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2195.907 MHz processor
[ 0.003061] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.003065] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.003072] last_pfn = 0x420000 max_arch_pfn = 0x400000000
[ 0.003079] MTRR default type: uncachable
[ 0.003081] MTRR fixed ranges enabled:
[ 0.003083] 00000-9FFFF write-back
[ 0.003085] A0000-BFFFF uncachable
[ 0.003088] C0000-FFFFF write-back
[ 0.003089] MTRR variable ranges enabled:
[ 0.003092] 0 base 00FF800000 mask FFFF800000 write-protect
[ 0.003095] 1 base 0080000000 mask FFC0000000 write-back
[ 0.003098] 2 base 0000000000 mask FF80000000 write-back
[ 0.003099] 3 disabled
[ 0.003101] 4 disabled
[ 0.003102] 5 disabled
[ 0.003103] 6 disabled
[ 0.003105] 7 disabled
[ 0.003107] TOM2: 0000000420000000 aka 16896M
[ 0.003800] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.003950] last_pfn = 0xbfce2 max_arch_pfn = 0x400000000
[ 0.008091] found SMP MP-table at [mem 0x000f6240-0x000f624f]
[ 0.008243] check: Scanning 1 areas for low memory corruption
[ 0.008250] Using GB pages for direct mapping
[ 0.008254] BRK [0xbe201000, 0xbe201fff] PGTABLE
[ 0.008258] BRK [0xbe202000, 0xbe202fff] PGTABLE
[ 0.008261] BRK [0xbe203000, 0xbe203fff] PGTABLE
[ 0.008337] BRK [0xbe204000, 0xbe204fff] PGTABLE
[ 0.008341] BRK [0xbe205000, 0xbe205fff] PGTABLE
[ 0.008838] BRK [0xbe206000, 0xbe206fff] PGTABLE
[ 0.008968] RAMDISK: [mem 0x3759b000-0x37ac4fff]
[ 0.008977] ACPI: Early table checksum verification disabled
[ 0.008984] ACPI: RSDP 0x00000000000F6410 000024 (v02 COREv4)
[ 0.008990] ACPI: XSDT 0x00000000BFCE50E0 000064 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.009001] ACPI: FACP 0x00000000BFCE6AF0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.009012] ACPI: DSDT 0x00000000BFCE5280 00186D (v02 COREv4 COREBOOT 00010001 INTL 20190703)
[ 0.009018] ACPI: FACS 0x00000000BFCE5240 000040
[ 0.009023] ACPI: FACS 0x00000000BFCE5240 000040
[ 0.009028] ACPI: SSDT 0x00000000BFCE6BF0 0001EA (v02 COREv4 COREBOOT 0000002A CORE 20190703)
[ 0.009034] ACPI: APIC 0x00000000BFCE6DE0 00007E (v02 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.009040] ACPI: HEST 0x00000000BFCE6E60 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.009046] ACPI: SSDT 0x00000000BFCE7030 0046D1 (v02 AMD AGESA 00000002 MSFT 04000000)
[ 0.009052] ACPI: SSDT 0x00000000BFCEB710 000E58 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.009058] ACPI: VFCT 0x00000000BFCEC570 00EA69 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.009065] ACPI: HPET 0x00000000BFCFAFE0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.009079] ACPI: Local APIC address 0xfee00000
[ 0.009255] No NUMA configuration found
[ 0.009257] Faking a node at [mem 0x0000000000000000-0x000000041fffffff]
[ 0.009263] NODE_DATA(0) allocated [mem 0x41fffa000-0x41fffdfff]
[ 0.009319] Zone ranges:
[ 0.009321] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.009323] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.009325] Normal [mem 0x0000000100000000-0x000000041fffffff]
[ 0.009327] Device empty
[ 0.009329] Movable zone start for each node
[ 0.009330] Early memory node ranges
[ 0.009331] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.009333] node 0: [mem 0x0000000000100000-0x00000000bfb1ffff]
[ 0.009335] node 0: [mem 0x00000000bfc88000-0x00000000bfce1fff]
[ 0.009337] node 0: [mem 0x0000000100000000-0x000000041fffffff]
[ 0.009363] Zeroed struct page in unavailable ranges: 1256 pages
[ 0.009365] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fffffff]
[ 0.009368] On node 0 totalpages: 4061976
[ 0.009370] DMA zone: 64 pages used for memmap
[ 0.009372] DMA zone: 21 pages reserved
[ 0.009373] DMA zone: 3998 pages, LIFO batch:0
[ 0.009475] DMA32 zone: 12206 pages used for memmap
[ 0.009476] DMA32 zone: 781178 pages, LIFO batch:63
[ 0.030592] Normal zone: 51200 pages used for memmap
[ 0.030597] Normal zone: 3276800 pages, LIFO batch:63
[ 0.113074] ACPI: PM-Timer IO Port: 0x818
[ 0.113083] ACPI: Local APIC address 0xfee00000
[ 0.113098] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.113110] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.113115] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
[ 0.113120] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.113123] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.113126] ACPI: IRQ0 used by override.
[ 0.113127] ACPI: IRQ9 used by override.
[ 0.113132] Using ACPI (MADT) for SMP configuration information
[ 0.113135] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.113147] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.113169] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.113172] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.113173] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.113174] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.113177] PM: Registered nosave memory: [mem 0xbfb20000-0xbfc87fff]
[ 0.113179] PM: Registered nosave memory: [mem 0xbfce2000-0xdfffffff]
[ 0.113181] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.113182] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.113183] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[ 0.113184] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.113185] PM: Registered nosave memory: [mem 0xfed45000-0xffffffff]
[ 0.113189] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.113191] Booting paravirtualized kernel on bare hardware
[ 0.113196] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.287482] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[ 0.288266] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.288285] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.288287] pcpu-alloc: [0] 0 1 2 3
[ 0.288325] Built 1 zonelists, mobility grouping on. Total pages: 3998485
[ 0.288327] Policy zone: Normal
[ 0.288330] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda1 rw net.ifnames=0 iomem=relaxed quiet resume=UUID=6be78740-528b-47a6-b3fb-41e95e99fe10
[ 0.293655] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.296271] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.296319] mem auto-init: stack:byref_all, heap alloc:off, heap free:off
[ 0.317170] Calgary: detecting Calgary via BIOS EBDA area
[ 0.317175] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.426270] Memory: 15868368K/16247904K available (12291K kernel code, 1321K rwdata, 3952K rodata, 1632K init, 3548K bss, 379536K reserved, 0K cma-reserved)
[ 0.426285] random: get_random_u64 called from __kmem_cache_create+0x3e/0x4c0 with crng_init=0
[ 0.426540] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.426566] ftrace: allocating 37810 entries in 148 pages
[ 0.450649] rcu: Preemptible hierarchical RCU implementation.
[ 0.450653] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.450654] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.450655] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.450657] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.450658] Tasks RCU enabled.
[ 0.450660] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.450661] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.454420] NR_IRQS: 20736, nr_irqs: 1000, preallocated irqs: 16
[ 0.454837] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.454932] spurious 8259A interrupt: IRQ7.
[ 0.454960] Console: colour dummy device 80x25
[ 0.454966] printk: console [tty0] enabled
[ 0.455000] ACPI: Core revision 20190703
[ 0.455274] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.455296] APIC: Switch to symmetric I/O mode setup
[ 0.455883] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.471965] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa7183727f, max_idle_ns: 440795251182 ns
[ 0.471973] Calibrating delay loop (skipped), value calculated using timer frequency.. 4393.80 BogoMIPS (lpj=7319690)
[ 0.471977] pid_max: default: 32768 minimum: 301
[ 0.472031] LSM: Security Framework initializing
[ 0.472037] Yama: becoming mindful.
[ 0.472137] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.472209] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.472483] *** VALIDATE proc ***
[ 0.472583] *** VALIDATE cgroup1 ***
[ 0.472586] *** VALIDATE cgroup2 ***
[ 0.472655] LVT offset 1 assigned for vector 0xf9
[ 0.472661] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.472663] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[ 0.472668] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.472671] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.472672] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.472675] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.472678] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.472954] Freeing SMP alternatives memory: 32K
[ 0.581136] smpboot: CPU0: AMD Athlon 5370 APU with Radeon R3 (family: 0x16, model: 0x0, stepping: 0x1)
[ 0.598649] Performance Events: AMD PMU driver.
[ 0.598655] ... version: 0
[ 0.598656] ... bit width: 48
[ 0.598657] ... generic registers: 4
[ 0.598659] ... value mask: 0000ffffffffffff
[ 0.598660] ... max period: 00007fffffffffff
[ 0.598661] ... fixed-purpose events: 0
[ 0.598662] ... event mask: 000000000000000f
[ 0.605309] rcu: Hierarchical SRCU implementation.
[ 0.628661] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.635315] smp: Bringing up secondary CPUs ...
[ 0.675333] x86: Booting SMP configuration:
[ 0.675335] .... node #0, CPUs: #1
[ 0.003782] do_IRQ: 1.55 No irq handler for vector
[ 0.715336] #2
[ 0.003782] do_IRQ: 2.55 No irq handler for vector
[ 0.755335] #3
[ 0.003782] do_IRQ: 3.55 No irq handler for vector
[ 0.757525] smp: Brought up 1 node, 4 CPUs
[ 0.757525] smpboot: Max logical packages: 1
[ 0.757525] smpboot: Total of 4 processors activated (17574.22 BogoMIPS)
[ 0.759772] devtmpfs: initialized
[ 0.759772] x86/mm: Memory block size: 128MB
[ 0.762167] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.762167] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.762167] pinctrl core: initialized pinctrl subsystem
[ 0.762232] PM: RTC time: 08:55:07, date: 2019-11-08
[ 0.762420] NET: Registered protocol family 16
[ 0.762420] audit: initializing netlink subsys (disabled)
[ 0.762420] audit: type=2000 audit(1573203307.306:1): state=initialized audit_enabled=0 res=1
[ 0.762420] cpuidle: using governor ladder
[ 0.762420] cpuidle: using governor menu
[ 0.762420] ACPI: bus type PCI registered
[ 0.762420] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.762420] PCI: Using configuration type 1 for base access
[ 0.762420] PCI: Using configuration type 1 for extended access
[ 0.766415] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.766416] mtrr: probably your BIOS does not setup all CPUs.
[ 0.766417] mtrr: corrected configuration.
[ 0.768693] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.768693] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.772143] fbcon: Taking over console
[ 0.772179] ACPI: Added _OSI(Module Device)
[ 0.772181] ACPI: Added _OSI(Processor Device)
[ 0.772182] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.772184] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.772186] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.772188] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.772189] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.783842] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.789885] ACPI: Interpreter enabled
[ 0.789924] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.789926] ACPI: Using IOAPIC for interrupt routing
[ 0.789948] HEST: Table parsing has been initialized.
[ 0.789953] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.790345] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.798092] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.798103] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.798219] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.798347] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored
[ 0.798720] PCI host bridge to bus 0000:00
[ 0.798724] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.798726] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.798729] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.798732] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.798734] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.798737] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.798754] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
[ 0.798948] pci 0000:00:01.0: [1002:9830] type 00 class 0x030000
[ 0.798971] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.798982] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.798990] pci 0000:00:01.0: reg 0x20: [io 0x2000-0x20ff]
[ 0.798998] pci 0000:00:01.0: reg 0x24: [mem 0xf0a00000-0xf0a3ffff]
[ 0.799005] pci 0000:00:01.0: reg 0x30: [mem 0xf0a40000-0xf0a5ffff pref]
[ 0.799011] pci 0000:00:01.0: enabling Extended Tags
[ 0.799060] pci 0000:00:01.0: supports D1 D2
[ 0.799062] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.799216] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[ 0.799237] pci 0000:00:01.1: reg 0x10: [mem 0xf0a60000-0xf0a63fff 64bit]
[ 0.799268] pci 0000:00:01.1: enabling Extended Tags
[ 0.799311] pci 0000:00:01.1: supports D1 D2
[ 0.799450] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
[ 0.799621] pci 0000:00:02.5: [1022:1439] type 01 class 0x060400
[ 0.799668] pci 0000:00:02.5: enabling Extended Tags
[ 0.799720] pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
[ 0.799898] pci 0000:00:11.0: [1022:7800] type 00 class 0x01018f
[ 0.799918] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
[ 0.799927] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
[ 0.799936] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
[ 0.799945] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
[ 0.799953] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
[ 0.799962] pci 0000:00:11.0: reg 0x24: [mem 0xf0a6b000-0xf0a6b3ff]
[ 0.799985] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.800012] pci 0000:00:11.0: PME# supported from D3hot
[ 0.800160] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.800179] pci 0000:00:12.0: reg 0x10: [mem 0xf0a68000-0xf0a68fff]
[ 0.800394] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.800415] pci 0000:00:12.2: reg 0x10: [mem 0xf0a6c000-0xf0a6c0ff]
[ 0.800493] pci 0000:00:12.2: supports D1 D2
[ 0.800495] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.800649] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.800669] pci 0000:00:13.0: reg 0x10: [mem 0xf0a69000-0xf0a69fff]
[ 0.800884] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.800905] pci 0000:00:13.2: reg 0x10: [mem 0xf0a6d000-0xf0a6d0ff]
[ 0.800982] pci 0000:00:13.2: supports D1 D2
[ 0.800985] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.801136] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.801332] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.801355] pci 0000:00:14.2: reg 0x10: [mem 0xf0a64000-0xf0a67fff 64bit]
[ 0.801423] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.801564] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.801768] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
[ 0.801788] pci 0000:00:16.0: reg 0x10: [mem 0xf0a6a000-0xf0a6afff]
[ 0.802005] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
[ 0.802026] pci 0000:00:16.2: reg 0x10: [mem 0xf0a6e000-0xf0a6e0ff]
[ 0.802103] pci 0000:00:16.2: supports D1 D2
[ 0.802106] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.802256] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
[ 0.802404] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[ 0.802543] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[ 0.802687] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[ 0.802831] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[ 0.802970] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[ 0.803190] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.803221] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.803249] pci 0000:01:00.0: reg 0x18: [mem 0xf0900000-0xf0900fff 64bit]
[ 0.803267] pci 0000:01:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref]
[ 0.803378] pci 0000:01:00.0: supports D1 D2
[ 0.803380] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.803529] pci 0000:00:02.5: PCI bridge to [bus 01]
[ 0.803535] pci 0000:00:02.5: bridge window [io 0x1000-0x1fff]
[ 0.803539] pci 0000:00:02.5: bridge window [mem 0xf0900000-0xf09fffff]
[ 0.803545] pci 0000:00:02.5: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[ 0.804100] ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15)
[ 0.804221] ACPI: PCI Interrupt Link [INTB] (IRQs 3 *4 5 7 10 11 12 15)
[ 0.804340] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15)
[ 0.804458] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15)
[ 0.804577] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.804696] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
[ 0.804812] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.804931] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.805436] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.805436] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.805436] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.805436] vgaarb: loaded
[ 0.805639] ACPI: bus type USB registered
[ 0.805668] usbcore: registered new interface driver usbfs
[ 0.805683] usbcore: registered new interface driver hub
[ 0.805715] usbcore: registered new device driver usb
[ 0.805761] pps_core: LinuxPPS API ver. 1 registered
[ 0.805762] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.805770] PTP clock support registered
[ 0.805783] EDAC MC: Ver: 3.0.0
[ 0.805880] PCI: Using ACPI for IRQ routing
[ 0.805880] PCI: pci_cache_line_size set to 64 bytes
[ 0.805880] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.805880] e820: reserve RAM buffer [mem 0xbfb20000-0xbfffffff]
[ 0.805880] e820: reserve RAM buffer [mem 0xbfce2000-0xbfffffff]
[ 0.805880] NetLabel: Initializing
[ 0.805880] NetLabel: domain hash size = 128
[ 0.805880] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.805880] NetLabel: unlabeled traffic allowed by default
[ 0.805880] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.805880] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.808647] clocksource: Switched to clocksource tsc-early
[ 0.834047] VFS: Disk quotas dquot_6.6.0
[ 0.834077] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.834133] *** VALIDATE hugetlbfs ***
[ 0.834236] pnp: PnP ACPI init
[ 0.834753] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
[ 0.834763] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.834814] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.834874] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.834921] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.834965] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.835012] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.835059] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.835122] system 00:07: [io 0x0230-0x023f] has been reserved
[ 0.835125] system 00:07: [io 0x0290-0x029f] has been reserved
[ 0.835132] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.835196] system 00:08: [io 0x0300-0x031f] has been reserved
[ 0.835204] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.835521] pnp: PnP ACPI: found 9 devices
[ 0.838718] thermal_sys: Registered thermal governor 'fair_share'
[ 0.838719] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.838730] thermal_sys: Registered thermal governor 'step_wise'
[ 0.838731] thermal_sys: Registered thermal governor 'user_space'
[ 0.838733] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.843275] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.843344] pci 0000:00:02.5: PCI bridge to [bus 01]
[ 0.843349] pci 0000:00:02.5: bridge window [io 0x1000-0x1fff]
[ 0.843356] pci 0000:00:02.5: bridge window [mem 0xf0900000-0xf09fffff]
[ 0.843360] pci 0000:00:02.5: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[ 0.843369] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.843372] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.843375] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.843377] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.843380] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
[ 0.843383] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.843385] pci_bus 0000:01: resource 1 [mem 0xf0900000-0xf09fffff]
[ 0.843388] pci_bus 0000:01: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
[ 0.843507] NET: Registered protocol family 2
[ 0.843761] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.843813] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.844132] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.844442] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.844550] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.844644] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.844842] NET: Registered protocol family 1
[ 0.844855] NET: Registered protocol family 44
[ 0.844879] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.844889] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[ 0.845456] pci 0000:00:12.2: PME# does not work under D3, disabling it
[ 0.845841] pci 0000:00:13.2: PME# does not work under D3, disabling it
[ 0.845929] pci 0000:00:16.0: can't derive routing for PCI INT A
[ 0.845931] pci 0000:00:16.0: PCI INT A: no GSI
[ 0.846025] pci 0000:00:16.2: can't derive routing for PCI INT B
[ 0.846027] pci 0000:00:16.2: PCI INT B: no GSI
[ 0.846045] pci 0000:00:16.2: PME# does not work under D3, disabling it
[ 0.846070] PCI: CLS 64 bytes, default 64
[ 0.846153] Trying to unpack rootfs image as initramfs...
[ 0.974729] Freeing initrd memory: 5288K
[ 0.974746] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.974749] software IO TLB: mapped [mem 0xb8600000-0xbc600000] (64MB)
[ 0.974849] amd_uncore: AMD NB counters detected
[ 0.974925] amd_uncore: AMD LLC counters detected
[ 0.975075] LVT offset 0 assigned for vector 0x400
[ 0.975129] perf: AMD IBS detected (0x000000ff)
[ 0.975229] check: Scanning for low memory corruption every 60 seconds
[ 0.976041] Initialise system trusted keyrings
[ 0.976062] Key type blacklist registered
[ 0.976164] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.978827] zbud: loaded
[ 0.988886] Key type asymmetric registered
[ 0.988890] Asymmetric key parser 'x509' registered
[ 0.988918] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.989017] io scheduler mq-deadline registered
[ 0.989019] io scheduler kyber registered
[ 0.989093] io scheduler bfq registered
[ 0.989737] pcieport 0000:00:02.5: PME: Signaling with IRQ 25
[ 0.989852] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.990007] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.990008] vesafb: scrolling: redraw
[ 0.990011] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.990040] vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 8128k, total 8128k
[ 0.990228] Console: switching to colour frame buffer device 240x67
[ 1.125441] fb0: VESA VGA frame buffer device
[ 1.125538] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.125619] ACPI: Power Button [PWRB]
[ 1.125715] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.128689] ACPI: Power Button [PWRF]
[ 1.129405] GHES: Failed to enable APEI firmware first mode.
[ 1.129612] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.150182] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.170823] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.171356] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.171357] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.172182] usbcore: registered new interface driver usbserial_generic
[ 1.172191] usbserial: USB Serial support registered for generic
[ 1.172220] rtc_cmos 00:01: RTC can wake from S4
[ 1.172368] rtc_cmos 00:01: registered as rtc0
[ 1.172398] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.172552] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.172600] x86/pm: family 0x16 cpu detected, MSR saving is needed during suspending.
[ 1.172932] NET: Registered protocol family 10
[ 1.184664] Segment Routing with IPv6
[ 1.184716] NET: Registered protocol family 17
[ 1.185172] RAS: Correctable Errors collector initialized.
[ 1.185252] microcode: CPU0: patch_level=0x07000110
[ 1.185259] microcode: CPU1: patch_level=0x07000110
[ 1.185269] microcode: CPU2: patch_level=0x07000110
[ 1.185278] microcode: CPU3: patch_level=0x07000110
[ 1.185366] microcode: Microcode Update Driver: v2.2.
[ 1.185388] sched_clock: Marking stable (1184908524, 449245)->(1190018196, -4660427)
[ 1.185668] registered taskstats version 1
[ 1.185682] Loading compiled-in X.509 certificates
[ 1.192951] Loaded X.509 cert 'Build time autogenerated kernel key: 80fb11315e06762a874154cfce096b9e29b8cdc9'
[ 1.193009] zswap: loaded using pool lzo/zbud
[ 1.204352] Key type big_key registered
[ 1.204906] PM: Magic number: 11:369:927
[ 1.205090] rtc_cmos 00:01: setting system clock to 2019-11-08T08:55:08 UTC (1573203308)
[ 1.207727] Freeing unused decrypted memory: 2040K
[ 1.208517] Freeing unused kernel image memory: 1632K
[ 1.228904] Write protecting the kernel read-only data: 18432k
[ 1.230127] Freeing unused kernel image memory: 2012K
[ 1.230248] Freeing unused kernel image memory: 144K
[ 1.251334] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.251339] Run /init as init process
[ 1.263569] udevd[187]: starting version 3.2.8
[ 1.263891] random: udevd: uninitialized urandom read (16 bytes read)
[ 1.263947] random: udevd: uninitialized urandom read (16 bytes read)
[ 1.264998] udevd[188]: starting eudev-3.2.8
[ 1.410682] random: udevd: uninitialized urandom read (16 bytes read)
[ 1.434231] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.434723] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.434734] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.442310] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.443406] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.443407] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 1.445188] ehci-pci: EHCI PCI platform driver
[ 1.445453] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.445464] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.445472] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.445483] ehci-pci 0000:00:12.2: debug port 1
[ 1.445559] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0a6c000
[ 1.448824] SCSI subsystem initialized
[ 1.458889] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.459105] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 1.459109] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.459112] usb usb1: Product: EHCI Host Controller
[ 1.459114] usb usb1: Manufacturer: Linux 5.3.6-artix1-1-ARTIX ehci_hcd
[ 1.459117] usb usb1: SerialNumber: 0000:00:12.2
[ 1.459540] hub 1-0:1.0: USB hub found
[ 1.459557] hub 1-0:1.0: 4 ports detected
[ 1.460303] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.460316] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.460324] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.460334] ehci-pci 0000:00:13.2: debug port 1
[ 1.460393] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0a6d000
[ 1.460935] libata version 3.00 loaded.
[ 1.468790] ahci 0000:00:11.0: version 3.0
[ 1.469099] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.469104] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio deso sadm sds
[ 1.469825] scsi host0: ahci
[ 1.473108] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.473217] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 1.473220] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.473223] usb usb2: Product: EHCI Host Controller
[ 1.473226] usb usb2: Manufacturer: Linux 5.3.6-artix1-1-ARTIX ehci_hcd
[ 1.473228] usb usb2: SerialNumber: 0000:00:13.2
[ 1.473437] hub 2-0:1.0: USB hub found
[ 1.473452] hub 2-0:1.0: 4 ports detected
[ 1.473912] ehci-pci 0000:00:16.2: can't derive routing for PCI INT B
[ 1.473915] ehci-pci 0000:00:16.2: PCI INT B: no GSI
[ 1.473921] ehci-pci 0000:00:16.2: Found HC with no IRQ. Check BIOS/PCI 0000:00:16.2 setup!
[ 1.473925] ehci-pci 0000:00:16.2: init 0000:00:16.2 fail, -19
[ 1.476120] ohci-pci: OHCI PCI platform driver
[ 1.476347] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.476359] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.476418] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0a68000
[ 1.478694] scsi host1: ahci
[ 1.478868] ata1: SATA max UDMA/133 abar m1024@0xf0a6b000 port 0xf0a6b100 irq 19
[ 1.478872] ata2: SATA max UDMA/133 abar m1024@0xf0a6b000 port 0xf0a6b180 irq 19
[ 1.539447] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[ 1.539452] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.539455] usb usb3: Product: OHCI PCI host controller
[ 1.539458] usb usb3: Manufacturer: Linux 5.3.6-artix1-1-ARTIX ohci_hcd
[ 1.539460] usb usb3: SerialNumber: 0000:00:12.0
[ 1.539675] hub 3-0:1.0: USB hub found
[ 1.539692] hub 3-0:1.0: 4 ports detected
[ 1.540187] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.540197] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 1.540238] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0a69000
[ 1.599422] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[ 1.599425] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.599427] usb usb4: Product: OHCI PCI host controller
[ 1.599429] usb usb4: Manufacturer: Linux 5.3.6-artix1-1-ARTIX ohci_hcd
[ 1.599432] usb usb4: SerialNumber: 0000:00:13.0
[ 1.599597] hub 4-0:1.0: USB hub found
[ 1.599612] hub 4-0:1.0: 4 ports detected
[ 1.599956] ohci-pci 0000:00:16.0: can't derive routing for PCI INT A
[ 1.599959] ohci-pci 0000:00:16.0: PCI INT A: no GSI
[ 1.599964] ohci-pci 0000:00:16.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:16.0 setup!
[ 1.599967] ohci-pci 0000:00:16.0: init 0000:00:16.0 fail, -19
[ 1.795084] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.955332] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.001990] tsc: Refined TSC clocksource calibration: 2196.022 MHz
[ 2.001997] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa78511cd6, max_idle_ns: 440795238336 ns
[ 2.002023] clocksource: Switched to clocksource tsc
[ 2.009767] ata2.00: ATA-8: ???, ???, max UDMA/100
[ 2.009770] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.011440] ata2.00: configured for UDMA/100
[ 2.011698] scsi 1:0:0:0: Direct-Access ATA ??? 1A PQ: 0 ANSI: 5
[ 2.017158] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.017163] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 2.017193] sd 1:0:0:0: [sda] Write Protect is off
[ 2.017197] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.017246] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.071999] usb 3-3: new full-speed USB device number 2 using ohci-pci
[ 2.125675] sda: sda1 sda2
[ 2.126380] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.255702] usb 3-3: New USB device found, idVendor=09da, idProduct=0080, bcdDevice= 2.0c
[ 2.255706] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.255709] usb 3-3: Product: USB Mouse
[ 2.255711] usb 3-3: Manufacturer: A4Tech
[ 2.265436] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.272973] usbcore: registered new interface driver usbhid
[ 2.272974] usbhid: USB HID core driver
[ 2.845330] usb 3-4: new low-speed USB device number 3 using ohci-pci
[ 3.043710] usb 3-4: New USB device found, idVendor=04d9, idProduct=a094, bcdDevice= 1.00
[ 3.043714] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.043717] usb 3-4: Product: USB Keyboard
[ 3.043720] usb 3-4: Manufacturer:
[ 3.116111] random: fast init done
[ 3.201316] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.630604] random: crng init done
[ 4.630609] random: 1 urandom warning(s) missed due to ratelimiting
[ 6.948027] udevd[701]: starting version 3.2.8
[ 7.636987] udevd[814]: starting eudev-3.2.8
[ 7.921292] acpi_cpufreq: overriding BIOS provided _PSD data
[ 8.070315] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 8.070318] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 8.070525] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 8.101723] parport_pc 00:06: reported by Plug and Play ACPI
[ 8.101800] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
[ 8.558409] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 8.558578] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[ 8.558745] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 8.705569] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 8.785414] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
[ 9.184398] cryptd: max_cpu_qlen set to 1000
[ 9.262600] ppdev: user-space parallel port driver
[ 9.458210] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 9.650844] Linux agpgart interface v0.103
[ 9.678597] AVX version of gcm_enc/dec engaged.
[ 9.678600] AES CTR mode by8 optimization enabled
[ 9.685670] libphy: r8169: probed
[ 9.686030] r8169 0000:01:00.0 eth0: RTL8168g/8111g, d0:17:c2:97:73:b0, XID 4c0, IRQ 30
[ 9.686034] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 10.858668] Adding 17550648k swap on /dev/sda2. Priority:-2 extents:1 across:17550648k FS
[ 10.899037] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:09DA:0080.0001/input/input8
[ 10.900293] hid-generic 0003:09DA:0080.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Mouse] on usb-0000:00:12.0-3/input0
[ 10.900685] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.0/0003:04D9:A094.0002/input/input9
[ 10.955557] hid-generic 0003:04D9:A094.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:12.0-4/input0
[ 10.955935] input: USB Keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.1/0003:04D9:A094.0003/input/input10
[ 11.012264] input: USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.1/0003:04D9:A094.0003/input/input11
[ 11.012397] hid-generic 0003:04D9:A094.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:12.0-4/input1
[ 11.028539] mousedev: PS/2 mouse device common for all mice
[ 11.050442] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 11.050446] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.050449] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 11.050452] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 11.050453] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 11.050457] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 11.050460] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 11.050462] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 11.068179] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 11.068285] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 11.068385] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[ 11.068488] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[ 11.068582] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[ 11.776805] [drm] radeon kernel modesetting enabled.
[ 11.776881] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
[ 11.776884] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf07fffff
[ 11.776887] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 5: 0xf0a00000 -> 0xf0a3ffff
[ 11.776890] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 11.776892] fb0: switching to radeondrmfb from VESA VGA
[ 11.777646] Console: switching to colour dummy device 80x25
[ 11.777722] radeon 0000:00:01.0: vgaarb: deactivate vga console
[ 11.778165] [drm] initializing kernel modesetting (KABINI 0x1002:0x9830 0x1002:0x9830 0x00).
[ 11.778197] [drm] doorbell mmio base: 0xF0000000
[ 11.778198] [drm] doorbell mmio size: 8388608
[ 11.778224] ATOM BIOS: AMD
[ 11.778288] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 11.778291] radeon 0000:00:01.0: GTT: 2048M 0x0000000020000000 - 0x000000009FFFFFFF
[ 11.778297] [drm] Detected VRAM RAM=512M, BAR=256M
[ 11.778298] [drm] RAM width 128bits DDR
[ 11.778412] [TTM] Zone kernel: Available graphics memory: 7939758 KiB
[ 11.778414] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 11.778415] [TTM] Initializing pool allocator
[ 11.778426] [TTM] Initializing DMA pool allocator
[ 11.778459] [drm] radeon: 512M of VRAM memory ready
[ 11.778461] [drm] radeon: 2048M of GTT memory ready.
[ 11.778473] [drm] Loading kabini Microcode
[ 11.881369] [drm] Internal thermal controller without fan control
[ 11.882507] [drm] radeon: dpm initialized
[ 11.892097] [drm] Found UVD firmware Version: 1.64 Family ID: 9
[ 11.905507] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 11.905521] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 11.932184] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[ 11.932371] radeon 0000:00:01.0: WB enabled
[ 11.932397] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x0000000036869426
[ 11.932401] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x00000000cd00bff2
[ 11.932404] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x0000000015ec6189
[ 11.932406] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x00000000e6b3c184
[ 11.932409] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x000000004dfcc48c
[ 11.933288] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0x00000000be8f866b
[ 11.933620] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0x000000006fc8b3f6
[ 11.933623] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0x0000000075b345bf
[ 11.933628] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.933629] [drm] Driver supports precise vblank timestamp query.
[ 11.933707] radeon 0000:00:01.0: radeon: using MSI.
[ 11.933744] [drm] radeon: irq initialized.
[ 11.936504] [drm] ring test on 0 succeeded in 3 usecs
[ 11.936581] [drm] ring test on 1 succeeded in 3 usecs
[ 11.936602] [drm] ring test on 2 succeeded in 3 usecs
[ 11.936811] [drm] ring test on 3 succeeded in 4 usecs
[ 11.936820] [drm] ring test on 4 succeeded in 4 usecs
[ 11.982877] [drm] ring test on 5 succeeded in 2 usecs
[ 12.002896] [drm] UVD initialized successfully.
[ 12.070235] kvm: Nested Virtualization enabled
[ 12.070239] kvm: Nested Paging enabled
[ 12.099883] MCE: In-kernel MCE decoding enabled.
[ 12.105525] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.105529] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 12.112986] [drm] ring test on 6 succeeded in 17 usecs
[ 12.112999] [drm] ring test on 7 succeeded in 3 usecs
[ 12.113000] [drm] VCE initialized successfully.
[ 12.113943] [drm] ib test on ring 0 succeeded in 0 usecs
[ 12.114102] [drm] ib test on ring 1 succeeded in 0 usecs
[ 12.114257] [drm] ib test on ring 2 succeeded in 0 usecs
[ 12.114416] [drm] ib test on ring 3 succeeded in 0 usecs
[ 12.114571] [drm] ib test on ring 4 succeeded in 0 usecs
[ 12.134289] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.134292] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 12.172812] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.172816] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 12.242626] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.242629] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 12.642190] [drm] ib test on ring 5 succeeded
[ 12.663077] [drm] ib test on ring 6 succeeded
[ 12.663762] [drm] ib test on ring 7 succeeded
[ 12.664552] [drm] Radeon Display Connectors
[ 12.664553] [drm] Connector 0:
[ 12.664555] [drm] HDMI-A-1
[ 12.664556] [drm] HPD1
[ 12.664559] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 12.664560] [drm] Encoders:
[ 12.664561] [drm] DFP1: INTERNAL_UNIPHY
[ 12.664563] [drm] Connector 1:
[ 12.664564] [drm] DVI-D-1
[ 12.664564] [drm] HPD2
[ 12.664567] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 12.664567] [drm] Encoders:
[ 12.664569] [drm] DFP2: INTERNAL_UNIPHY
[ 12.664570] [drm] Connector 2:
[ 12.664571] [drm] VGA-1
[ 12.664573] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[ 12.664574] [drm] Encoders:
[ 12.664575] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 12.731769] snd_hda_codec_hdmi hdaudioC0D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 12.748294] [drm] fb mappable at 0xE0731000
[ 12.748297] [drm] vram apper at 0xE0000000
[ 12.748298] [drm] size 8294400
[ 12.748299] [drm] fb depth is 24
[ 12.748300] [drm] pitch is 7680
[ 12.748446] fbcon: radeondrmfb (fb0) is primary device
[ 12.770262] Console: switching to colour frame buffer device 240x67
[ 12.779745] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 12.823202] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[ 13.255547] [drm] amdgpu kernel modesetting enabled.
[ 13.255689] CRAT table not found
[ 13.255694] Virtual CRAT table created for CPU
[ 13.255696] Parsing CRAT table with 1 nodes
[ 13.255701] Creating topology SYSFS entries
[ 13.255723] Topology: Add CPU node
[ 13.255724] Finished initializing topology
[ 14.033057] elogind-daemon[2022]: New seat seat0.
[ 14.038098] elogind-daemon[2022]: Watching system buttons on /dev/input/event1 (Power Button)
[ 14.038404] elogind-daemon[2022]: Watching system buttons on /dev/input/event0 (Power Button)
[ 14.079308] elogind-daemon[2022]: Watching system buttons on /dev/input/event5 ( USB Keyboard)
[ 14.079745] elogind-daemon[2022]: Watching system buttons on /dev/input/event6 ( USB Keyboard System Control)
[ 15.950864] Bluetooth: Core ver 2.22
[ 15.950932] NET: Registered protocol family 31
[ 15.950937] Bluetooth: HCI device and connection manager initialized
[ 15.950951] Bluetooth: HCI socket layer initialized
[ 15.950960] Bluetooth: L2CAP socket layer initialized
[ 15.950975] Bluetooth: SCO socket layer initialized
[ 16.156707] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.156714] Bluetooth: BNEP filters: protocol multicast
[ 16.156728] Bluetooth: BNEP socket layer initialized
[ 16.909981] Generic Realtek PHY r8169-100:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[ 17.029595] r8169 0000:01:00.0 eth0: Link is Down
[ 32.416798] elogind-daemon[2022]: New session c1 of user sddm.
[ 42.980119] elogind-daemon[2022]: New session 1 of user owner.
[ 43.153943] elogind-daemon[2022]: Removed session c1.
[ 52.876931] fuse: init (API version 7.31)
[ 80.086650] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 80.086967] r8169 0000:01:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 80.194097] 8021q: 802.1Q VLAN Support v1.8