| [ 0.000000] Linux version 5.0.0-00051-g4cbe15559a19 (root@f2ba3045983e) (gcc version 8.2.0 (Debian 8.2.0-21)) #9 SMP Mon Mar 4 22:15:42 UTC 2019 |
| [ 0.000000] x86/fpu: x87 FPU will use FXSAVE |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7d47fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000c7d48000-0x00000000c7ffffff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x00000000c8000000-0x00000000dfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable |
| [ 0.000000] kmemleak: Kernel memory leak detector disabled |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.9-902-g80b0c6458a 03/05/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1600.096 MHz processor |
| [ 0.006035] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.006040] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.006050] last_pfn = 0x11f000 max_arch_pfn = 0x1000000 |
| [ 0.006060] MTRR default type: uncachable |
| [ 0.006062] MTRR fixed ranges enabled: |
| [ 0.006065] 00000-9FFFF write-back |
| [ 0.006067] A0000-BFFFF uncachable |
| [ 0.006070] C0000-FFFFF write-back |
| [ 0.006072] MTRR variable ranges enabled: |
| [ 0.006075] 0 base 0FFC00000 mask FFFC00000 write-protect |
| [ 0.006078] 1 base 0C0000000 mask FF8000000 write-back |
| [ 0.006081] 2 base 080000000 mask FC0000000 write-back |
| [ 0.006083] 3 base 000000000 mask F80000000 write-back |
| [ 0.006085] 4 disabled |
| [ 0.006086] 5 disabled |
| [ 0.006087] 6 disabled |
| [ 0.006089] 7 disabled |
| [ 0.006092] TOM2: 000000011f000000 aka 4592M |
| [ 0.006289] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.006382] initial memory mapped: [mem 0x00000000-0x073fffff] |
| [ 0.006393] Base memory trampoline at [(ptrval)] 9b000 size 16384 |
| [ 0.006557] BRK [0x06e39000, 0x06e39fff] PGTABLE |
| [ 0.006581] BRK [0x06e3a000, 0x06e3afff] PGTABLE |
| [ 0.006594] ACPI: Early table checksum verification disabled |
| [ 0.006720] ACPI: RSDP 0x00000000000F0800 000024 (v02 COREv4) |
| [ 0.006727] ACPI: XSDT 0x00000000C7D490E0 000064 (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.006741] ACPI: FACP 0x00000000C7D4B840 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.006755] ACPI: DSDT 0x00000000C7D49280 0025B6 (v02 COREv4 COREBOOT 00010001 INTL 20181213) |
| [ 0.006762] ACPI: FACS 0x00000000C7D49240 000040 |
| [ 0.006767] ACPI: FACS 0x00000000C7D49240 000040 |
| [ 0.006772] ACPI: SSDT 0x00000000C7D4B940 00008A (v02 COREv4 COREBOOT 0000002A CORE 00000000) |
| [ 0.006778] ACPI: APIC 0x00000000C7D4B9D0 00005C (v02 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.006784] ACPI: HEST 0x00000000C7D4BA30 000028 (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.006790] ACPI: SSDT 0x00000000C7D4BA60 00168E (v02 AMD ALIB 00000001 MSFT 04000000) |
| [ 0.006797] ACPI: SSDT 0x00000000C7D4D0F0 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001) |
| [ 0.006804] ACPI: VFCT 0x00000000C7D4D4D0 00E269 (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.006810] ACPI: HPET 0x00000000C7D5B740 000038 (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.006829] ACPI: Local APIC address 0xfee00000 |
| [ 0.006837] 3706MB HIGHMEM available. |
| [ 0.006842] 885MB LOWMEM available. |
| [ 0.006844] mapped low ram: 0 - 375fe000 |
| [ 0.006845] low ram: 0 - 375fe000 |
| [ 0.006857] BRK [0x06e3b000, 0x06e3bfff] PGTABLE |
| [ 0.017654] Zone ranges: |
| [ 0.017658] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.017661] Normal [mem 0x0000000001000000-0x00000000375fdfff] |
| [ 0.017664] HighMem [mem 0x00000000375fe000-0x000000011effffff] |
| [ 0.017666] Movable zone start for each node |
| [ 0.017667] Early memory node ranges |
| [ 0.017669] node 0: [mem 0x0000000000001000-0x000000000009ffff] |
| [ 0.017671] node 0: [mem 0x0000000000100000-0x00000000c7d47fff] |
| [ 0.017673] node 0: [mem 0x0000000100000000-0x000000011effffff] |
| [ 0.021827] Zeroed struct page in unavailable ranges: 99097 pages |
| [ 0.021832] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff] |
| [ 0.021838] On node 0 totalpages: 945383 |
| [ 0.021841] DMA zone: 40 pages used for memmap |
| [ 0.021843] DMA zone: 0 pages reserved |
| [ 0.021845] DMA zone: 3999 pages, LIFO batch:0 |
| [ 0.022062] Normal zone: 2175 pages used for memmap |
| [ 0.022064] Normal zone: 222718 pages, LIFO batch:63 |
| [ 0.033607] HighMem zone: 718666 pages, LIFO batch:63 |
| [ 0.077047] Using APIC driver default |
| [ 0.077329] ACPI: Local APIC address 0xfee00000 |
| [ 0.077352] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 |
| [ 0.077358] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.077364] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| [ 0.077367] ACPI: IRQ0 used by override. |
| [ 0.077370] ACPI: IRQ9 used by override. |
| [ 0.077374] Using ACPI (MADT) for SMP configuration information |
| [ 0.077378] ACPI: HPET id: 0x43538210 base: 0xfed00000 |
| [ 0.077389] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| [ 0.077415] [mem 0xe0000000-0xf7ffffff] available for PCI devices |
| [ 0.077423] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns |
| [ 0.077427] After setup_arch |
| [ 0.077428] After add_latent_entropy |
| [ 0.077445] After add_device_randomness |
| [ 0.077456] random: get_random_bytes called from start_kernel+0x9b/0x509 with crng_init=0 |
| [ 0.077462] After boot_init_stack_canary |
| [ 0.077463] After mm_init_cpumask |
| [ 0.077475] After setup_command_line |
| [ 0.077477] After setup_nr_cpu_ids |
| [ 0.077479] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 |
| [ 0.077726] percpu: Embedded 30 pages/cpu @(ptrval) s90188 r0 d32692 u122880 |
| [ 0.077738] pcpu-alloc: s90188 r0 d32692 u122880 alloc=30*4096 |
| [ 0.077740] pcpu-alloc: [0] 0 [0] 1 |
| [ 0.077766] After setup_per_cpu_areas |
| [ 0.077768] After smp_perpare_boot_cpu |
| [ 0.077769] After boot_cpu_hotplug_init |
| [ 0.077775] Built 1 zonelists, mobility grouping on. Total pages: 943168 |
| [ 0.077779] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-00051-g4cbe15559a19 root=/dev/sda1 rw noisapnp cryptomgr.notests quiet iomem=relaxed apparmor=0 selinux=0 kmemleak=off initcall_blacklist=serial8250_init udev.children_max=3 udev.log_priority=info |
| [ 0.078043] blacklisting initcall serial8250_init |
| [ 0.078400] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) |
| [ 0.078589] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) |
| [ 0.078600] Initializing CPU#0 |
| [ 0.113694] Initializing HighMem for node 0 (000375fe:0011f000) |
| [ 0.113698] add_highpages_with_active_regions: start_pfn = 226814, end_pfn = 1175552 |
| [ 0.113702] add_highpages_with_active_regions: for_each_free_mem_range: i = 8589934592, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113705] add_highpages_with_active_regions: for_each_free_mem_range: i = 12884901889, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113707] add_highpages_with_active_regions: for_each_free_mem_range: i = 17179869185, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113710] add_highpages_with_active_regions: for_each_free_mem_range: i = 21474836481, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113712] add_highpages_with_active_regions: for_each_free_mem_range: i = 25769803777, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113714] add_highpages_with_active_regions: for_each_free_mem_range: i = 30064771073, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113716] add_highpages_with_active_regions: for_each_free_mem_range: i = 34359738369, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113718] add_highpages_with_active_regions: for_each_free_mem_range: i = 38654705665, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113721] add_highpages_with_active_regions: for_each_free_mem_range: i = 42949672961, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113723] add_highpages_with_active_regions: for_each_free_mem_range: i = 47244640257, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113725] add_highpages_with_active_regions: for_each_free_mem_range: i = 51539607553, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113727] add_highpages_with_active_regions: for_each_free_mem_range: i = 55834574849, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113730] add_highpages_with_active_regions: for_each_free_mem_range: i = 60129542145, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113732] add_highpages_with_active_regions: for_each_free_mem_range: i = 64424509441, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113734] add_highpages_with_active_regions: for_each_free_mem_range: i = 68719476737, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113737] add_highpages_with_active_regions: for_each_free_mem_range: i = 73014444033, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113739] add_highpages_with_active_regions: for_each_free_mem_range: i = 77309411329, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113741] add_highpages_with_active_regions: for_each_free_mem_range: i = 81604378625, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113743] add_highpages_with_active_regions: for_each_free_mem_range: i = 85899345921, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113745] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313217, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113748] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313218, nid = 0, pfn = 226814, e_pfn = 818504, before for loop |
| [ 0.289503] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313219, nid = 0, pfn = 1048576, e_pfn = 1175552, before for loop |
| [ 0.327181] Initializing Movable for node 0 (00000000:00000000) |
| [ 0.327185] add_highpages_with_active_regions: start_pfn = 0, end_pfn = 0 |
| [ 0.327188] add_highpages_with_active_regions: for_each_free_mem_range: i = 8589934592, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327190] add_highpages_with_active_regions: for_each_free_mem_range: i = 12884901889, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327193] add_highpages_with_active_regions: for_each_free_mem_range: i = 17179869185, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327195] add_highpages_with_active_regions: for_each_free_mem_range: i = 21474836481, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327197] add_highpages_with_active_regions: for_each_free_mem_range: i = 25769803777, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327200] add_highpages_with_active_regions: for_each_free_mem_range: i = 30064771073, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327202] add_highpages_with_active_regions: for_each_free_mem_range: i = 34359738369, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327204] add_highpages_with_active_regions: for_each_free_mem_range: i = 38654705665, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327206] add_highpages_with_active_regions: for_each_free_mem_range: i = 42949672961, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327208] add_highpages_with_active_regions: for_each_free_mem_range: i = 47244640257, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327210] add_highpages_with_active_regions: for_each_free_mem_range: i = 51539607553, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327213] add_highpages_with_active_regions: for_each_free_mem_range: i = 55834574849, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327215] add_highpages_with_active_regions: for_each_free_mem_range: i = 60129542145, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327217] add_highpages_with_active_regions: for_each_free_mem_range: i = 64424509441, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327219] add_highpages_with_active_regions: for_each_free_mem_range: i = 68719476737, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327221] add_highpages_with_active_regions: for_each_free_mem_range: i = 73014444033, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327223] add_highpages_with_active_regions: for_each_free_mem_range: i = 77309411329, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327226] add_highpages_with_active_regions: for_each_free_mem_range: i = 81604378625, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327228] add_highpages_with_active_regions: for_each_free_mem_range: i = 85899345921, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327230] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313217, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327232] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313218, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.327235] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313219, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.333590] Memory: 3646668K/3781532K available (8776K kernel code, 737K rwdata, 2908K rodata, 1124K init, 648K bss, 134864K reserved, 0K cma-reserved, 2874664K highmem) |
| [ 0.333601] virtual kernel memory layout: |
| fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB) |
| cpu_entry : 0xffa00000 - 0xffa4d000 ( 308 kB) |
| pkmap : 0xff600000 - 0xff800000 (2048 kB) |
| vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB) |
| lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB) |
| .init : 0xc6c3a000 - 0xc6d53000 (1124 kB) |
| .data : 0xc68923b0 - 0xc6c286c0 (3672 kB) |
| .text : 0xc6000000 - 0xc68923b0 (8776 kB) |
| [ 0.333603] Checking if this processor honours the WP bit even in supervisor mode...Ok. |
| [ 0.334019] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 |
| [ 0.334022] After mm_init |
| [ 0.334024] ftrace: allocating 33777 entries in 66 pages |
| [ 0.361285] After sched_init |
| [ 0.361345] rcu: Hierarchical RCU implementation. |
| [ 0.361346] rcu: RCU event tracing is enabled. |
| [ 0.361350] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. |
| [ 0.361361] After rcu_init |
| [ 0.367254] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16 |
| [ 0.367714] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval) |
| [ 0.370125] Console: colour VGA+ 80x25 |
| [ 0.370137] printk: console [tty0] enabled |
| [ 0.370190] ACPI: Core revision 20181213 |
| [ 0.370748] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns |
| [ 0.370769] hpet clockevent registered |
| [ 0.370779] APIC: Switch to symmetric I/O mode setup |
| [ 0.370781] Enabling APIC mode: Flat. Using 1 I/O APICs |
| [ 0.371286] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| [ 0.375847] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x17107fa0524, max_idle_ns: 440795237021 ns |
| [ 0.375867] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.19 BogoMIPS (lpj=1600096) |
| [ 0.375873] pid_max: default: 32768 minimum: 301 |
| [ 0.375963] LSM: Security Framework initializing |
| [ 0.375967] Yama: becoming mindful. |
| [ 0.375978] SELinux: Disabled at boot. |
| [ 0.376011] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) |
| [ 0.376018] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) |
| [ 0.376459] mce: CPU supports 6 MCE banks |
| [ 0.376492] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| [ 0.376494] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 |
| [ 0.376499] Spectre V2 : Mitigation: Full AMD retpoline |
| [ 0.376501] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.376503] Speculative Store Bypass: Vulnerable |
| [ 0.376738] Freeing SMP alternatives memory: 32K |
| [ 0.376741] After check_bugs |
| [ 0.376745] After acpi_subsystem_init |
| [ 0.376746] After arch_post_acpi_subsys_init |
| [ 0.376747] After sfi_init_late |
| [ 0.376749] After rcu_scheduler_starting |
| [ 0.376861] After find_task_by_pid_ns |
| [ 0.376865] After numa_default_policy |
| [ 0.376901] After rcu_read_lock |
| [ 0.376902] After rcu_read_unlock |
| [ 0.376907] After kthreadd_done |
| [ 0.377850] random: 1 |
| [ 0.377850] random: 2 |
| [ 0.377850] random: 3 |
| [ 0.377850] random: 4 |
| [ 0.396852] random: 1 |
| [ 0.396853] random: 2 |
| [ 0.396855] random: 3 |
| [ 0.396856] random: 4 |
| [ 0.460852] random: 1 |
| [ 0.460853] random: 2 |
| [ 0.460855] random: 3 |
| [ 0.460855] random: 4 |
| [ 0.478864] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (family: 0x14, model: 0x2, stepping: 0x0) |
| [ 0.479153] Performance Events: AMD PMU driver. |
| [ 0.479161] ... version: 0 |
| [ 0.479163] ... bit width: 48 |
| [ 0.479164] ... generic registers: 4 |
| [ 0.479166] ... value mask: 0000ffffffffffff |
| [ 0.479167] ... max period: 00007fffffffffff |
| [ 0.479169] ... fixed-purpose events: 0 |
| [ 0.479170] ... event mask: 000000000000000f |
| [ 0.479272] rcu: Hierarchical SRCU implementation. |
| [ 0.480148] smp: Bringing up secondary CPUs ... |
| [ 0.480402] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval) |
| [ 0.480405] x86: Booting SMP configuration: |
| [ 0.480407] .... node #0, CPUs: #1 |
| [ 0.004113] Initializing CPU#1 |
| [ 0.480902] After schedule_preempt_disabled |
| [ 0.480932] smp: Brought up 1 node, 2 CPUs |
| [ 0.480932] smpboot: Max logical packages: 1 |
| [ 0.480932] smpboot: Total of 2 processors activated (6400.38 BogoMIPS) |
| [ 0.483028] devtmpfs: initialized |
| [ 0.483862] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns |
| [ 0.483862] futex hash table entries: 512 (order: 3, 32768 bytes) |
| [ 0.483862] pinctrl core: initialized pinctrl subsystem |
| [ 0.483862] RTC time: 09:07:40, date: 2019-03-05 |
| [ 0.483862] NET: Registered protocol family 16 |
| [ 0.484189] audit: initializing netlink subsys (disabled) |
| [ 0.484925] audit: type=2000 audit(1551776860.114:1): state=initialized audit_enabled=0 res=1 |
| [ 0.485117] cpuidle: using governor menu |
| [ 0.485122] ACPI: bus type PCI registered |
| [ 0.486229] PCI: Using configuration type 1 for base access |
| [ 0.486230] PCI: Using configuration type 1 for extended access |
| [ 0.486550] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.486552] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.486553] mtrr: corrected configuration. |
| [ 0.490973] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.490973] cryptd: max_cpu_qlen set to 1000 |
| [ 0.492033] ACPI: Added _OSI(Module Device) |
| [ 0.492036] ACPI: Added _OSI(Processor Device) |
| [ 0.492038] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.492040] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.492043] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.492045] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.492047] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.503354] ACPI: 4 ACPI AML tables successfully acquired and loaded |
| [ 0.506413] ACPI: Interpreter enabled |
| [ 0.506460] ACPI: (supports S0 S1 S3 S5) |
| [ 0.506463] ACPI: Using IOAPIC for interrupt routing |
| [ 0.506500] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.506850] ACPI: Enabled 19 GPEs in block 00 to 1F |
| [ 0.516869] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.516885] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.517048] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] |
| [ 0.517495] PCI host bridge to bus 0000:00 |
| [ 0.517500] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.517504] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.517507] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.517510] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] |
| [ 0.517514] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.517532] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 |
| [ 0.517819] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000 |
| [ 0.517843] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] |
| [ 0.517865] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff] |
| [ 0.517875] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff] |
| [ 0.517906] pci 0000:00:01.0: enabling Extended Tags |
| [ 0.517956] pci 0000:00:01.0: supports D1 D2 |
| [ 0.518192] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300 |
| [ 0.518214] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff] |
| [ 0.518255] pci 0000:00:01.1: enabling Extended Tags |
| [ 0.518302] pci 0000:00:01.1: supports D1 D2 |
| [ 0.518636] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 |
| [ 0.518666] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417] |
| [ 0.518679] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423] |
| [ 0.518693] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f] |
| [ 0.518707] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427] |
| [ 0.518720] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f] |
| [ 0.518734] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff] |
| [ 0.519092] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.519118] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff] |
| [ 0.519491] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.519520] pci 0000:00:12.2: reg 0x10: [mem 0xf014c000-0xf014c0ff] |
| [ 0.519631] pci 0000:00:12.2: supports D1 D2 |
| [ 0.519635] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.519637] pci 0000:00:12.2: pme_poll = true |
| [ 0.519639] pci 0000:00:12.2: after device_set_wakeup_capable() |
| [ 0.519646] pci 0000:00:12.2: after pci_pme_active() |
| [ 0.519960] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.519985] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff] |
| [ 0.520360] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.520390] pci 0000:00:13.2: reg 0x10: [mem 0xf014d000-0xf014d0ff] |
| [ 0.520501] pci 0000:00:13.2: supports D1 D2 |
| [ 0.520504] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.520506] pci 0000:00:13.2: pme_poll = true |
| [ 0.520508] pci 0000:00:13.2: after device_set_wakeup_capable() |
| [ 0.520514] pci 0000:00:13.2: after pci_pme_active() |
| [ 0.520819] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 |
| [ 0.521209] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 |
| [ 0.521244] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit] |
| [ 0.521338] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold |
| [ 0.521340] pci 0000:00:14.2: pme_poll = true |
| [ 0.521342] pci 0000:00:14.2: after device_set_wakeup_capable() |
| [ 0.521347] pci 0000:00:14.2: after pci_pme_active() |
| [ 0.521640] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 |
| [ 0.522031] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 |
| [ 0.522384] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 |
| [ 0.522409] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff] |
| [ 0.522789] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 |
| [ 0.522843] pci 0000:00:15.0: enabling Extended Tags |
| [ 0.522925] pci 0000:00:15.0: supports D1 D2 |
| [ 0.523247] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 |
| [ 0.523307] pci 0000:00:15.1: enabling Extended Tags |
| [ 0.523378] pci 0000:00:15.1: supports D1 D2 |
| [ 0.523705] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 |
| [ 0.523967] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 |
| [ 0.524212] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 |
| [ 0.524457] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 |
| [ 0.524724] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 |
| [ 0.524976] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 |
| [ 0.525218] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 |
| [ 0.525460] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 |
| [ 0.525796] pci_bus 0000:01: extended config space not accessible |
| [ 0.525899] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) |
| [ 0.525913] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) |
| [ 0.525917] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) |
| [ 0.525920] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| [ 0.525923] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode) |
| [ 0.526003] pci 0000:00:15.0: PCI bridge to [bus 02] |
| [ 0.526117] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 0.526160] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff] |
| [ 0.526198] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref] |
| [ 0.526223] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] |
| [ 0.526367] pci 0000:03:00.0: supports D1 D2 |
| [ 0.526370] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.526372] pci 0000:03:00.0: pme_poll = true |
| [ 0.526374] pci 0000:03:00.0: after device_set_wakeup_capable() |
| [ 0.526381] pci 0000:03:00.0: after pci_pme_active() |
| [ 0.528950] pci 0000:00:15.1: PCI bridge to [bus 03] |
| [ 0.528965] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff] |
| [ 0.528981] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.529024] pci_bus 0000:00: on NUMA node 0 |
| [ 0.530482] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.530810] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.531182] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.531504] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.531826] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.532160] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled. |
| [ 0.532478] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.532798] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.533325] pci 0000:00:01.0: vgaarb: setting as boot VGA device |
| [ 0.533325] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.533325] pci 0000:00:01.0: vgaarb: bridge control possible |
| [ 0.533325] vgaarb: loaded |
| [ 0.533325] SCSI subsystem initialized |
| [ 0.533325] libata version 3.00 loaded. |
| [ 0.533905] ACPI: bus type USB registered |
| [ 0.533948] usbcore: registered new interface driver usbfs |
| [ 0.533967] usbcore: registered new interface driver hub |
| [ 0.534002] usbcore: registered new device driver usb |
| [ 0.534149] PCI: Using ACPI for IRQ routing |
| [ 0.534149] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.534149] e820: reserve RAM buffer [mem 0xc7d48000-0xc7ffffff] |
| [ 0.534149] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff] |
| [ 0.534949] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| [ 0.534956] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| [ 0.536938] clocksource: Switched to clocksource tsc-early |
| [ 0.564812] VFS: Disk quotas dquot_6.6.0 |
| [ 0.564852] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
| [ 0.565004] pnp: PnP ACPI init |
| [ 0.565814] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.565917] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.566001] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.566591] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.566683] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.566713] pnp: PnP ACPI: found 5 devices |
| [ 0.571516] pci 0000:00:14.4: PCI bridge to [bus 01] |
| [ 0.571538] pci 0000:00:15.0: PCI bridge to [bus 02] |
| [ 0.571554] pci 0000:00:15.1: PCI bridge to [bus 03] |
| [ 0.571559] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff] |
| [ 0.571569] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.571583] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.571586] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.571590] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.571593] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.571597] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.571600] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window] |
| [ 0.571603] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.571606] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.571610] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] |
| [ 0.571613] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.571825] NET: Registered protocol family 2 |
| [ 0.572159] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) |
| [ 0.572170] TCP established hash table entries: 8192 (order: 3, 32768 bytes) |
| [ 0.572198] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.572234] TCP: Hash tables configured (established 8192 bind 8192) |
| [ 0.572292] UDP hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.572304] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.572403] NET: Registered protocol family 1 |
| [ 0.572440] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.572452] pci 0000:00:01.1: Linked as a consumer to 0000:00:01.0 |
| [ 0.575548] PCI: CLS 64 bytes, default 64 |
| [ 0.575677] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.575682] software IO TLB: mapped [mem 0x2f9fd000-0x339fd000] (64MB) |
| [ 0.575878] LVT offset 0 assigned for vector 0x400 |
| [ 0.575957] perf: AMD IBS detected (0x000000ff) |
| [ 0.577413] Initialise system trusted keyrings |
| [ 0.577691] workingset: timestamp_bits=14 max_order=20 bucket_order=6 |
| [ 0.581058] zbud: loaded |
| [ 0.581983] alg: self-tests disabled |
| [ 0.591955] NET: Registered protocol family 38 |
| [ 0.591971] Key type asymmetric registered |
| [ 0.591975] Asymmetric key parser 'x509' registered |
| [ 0.592009] bounce: pool size: 64 pages |
| [ 0.592048] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) |
| [ 0.592141] io scheduler mq-deadline registered |
| [ 0.592146] io scheduler kyber registered |
| [ 0.593090] pcieport 0000:00:15.0: Signaling PME with IRQ 24 |
| [ 0.593558] pcieport 0000:00:15.1: Signaling PME with IRQ 25 |
| [ 0.593841] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 |
| [ 0.593896] ACPI: Power Button [PWRB] |
| [ 0.594069] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 |
| [ 0.594158] ACPI: Power Button [PWRF] |
| [ 0.596022] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 0.596028] ACPI: Thermal Zone [TZ00] (43 C) |
| [ 0.596366] initcall serial8250_init blacklisted |
| [ 0.597064] Non-volatile memory driver v1.3 |
| [ 0.597197] Linux agpgart interface v0.103 |
| [ 0.597860] [drm] radeon kernel modesetting enabled. |
| [ 0.598715] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802 0x00). |
| [ 0.598792] ATOM BIOS: AMD |
| [ 0.598879] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) |
| [ 0.598884] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF |
| [ 0.598891] [drm] Detected VRAM RAM=384M, BAR=256M |
| [ 0.598893] [drm] RAM width 32bits DDR |
| [ 0.599143] [TTM] Zone kernel: Available graphics memory: 386018 kiB |
| [ 0.599145] [TTM] Zone highmem: Available graphics memory: 1823350 kiB |
| [ 0.599146] [TTM] Initializing pool allocator |
| [ 0.599154] [TTM] Initializing DMA pool allocator |
| [ 0.599192] [drm] radeon: 384M of VRAM memory ready |
| [ 0.599194] [drm] radeon: 1024M of GTT memory ready. |
| [ 0.599215] [drm] Loading PALM Microcode |
| [ 0.599224] [drm] Internal thermal controller without fan control |
| [ 0.599287] [drm] Found smc ucode version: 0x00010601 |
| [ 0.599359] [drm] radeon: dpm initialized |
| [ 0.599403] [drm] GART: num cpu pages 262144, num gpu pages 262144 |
| [ 0.605300] [drm] GART: Restore entries: num cpu pages 262144, num gpu pages 262144 |
| [ 0.610408] [drm] GART: Done restoring entries |
| [ 0.610418] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). |
| [ 0.610687] radeon 0000:00:01.0: WB enabled |
| [ 0.610695] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0x(ptrval) |
| [ 0.610699] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0x(ptrval) |
| [ 0.611550] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x(ptrval) |
| [ 0.611562] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 0.611563] [drm] Driver supports precise vblank timestamp query. |
| [ 0.611566] radeon 0000:00:01.0: radeon: MSI limited to 32-bit |
| [ 0.611668] radeon 0000:00:01.0: radeon: using MSI. |
| [ 0.611706] [drm] radeon: irq initialized. |
| [ 0.628309] [drm] ring test on 0 succeeded in 1 usecs |
| [ 0.628318] [drm] ring test on 3 succeeded in 3 usecs |
| [ 0.642380] [drm] ring test on 5 succeeded in 1 usecs |
| [ 0.644402] [drm] UVD initialized successfully. |
| [ 0.644621] [drm] ib test on ring 0 succeeded in 0 usecs |
| [ 0.644688] [drm] ib test on ring 3 succeeded in 0 usecs |
| [ 0.697754] [drm] ib test on ring 5 succeeded |
| [ 0.700481] [drm] Radeon Display Connectors |
| [ 0.700483] [drm] Connector 0: |
| [ 0.700484] [drm] HDMI-A-1 |
| [ 0.700485] [drm] HPD1 |
| [ 0.700488] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c |
| [ 0.700490] [drm] Encoders: |
| [ 0.700491] [drm] DFP1: INTERNAL_UNIPHY |
| [ 0.700493] [drm] Connector 1: |
| [ 0.700494] [drm] HDMI-A-2 |
| [ 0.700495] [drm] HPD2 |
| [ 0.700497] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c |
| [ 0.700498] [drm] Encoders: |
| [ 0.700499] [drm] DFP2: INTERNAL_UNIPHY |
| [ 0.700500] [drm] Connector 2: |
| [ 0.700501] [drm] VGA-1 |
| [ 0.700504] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 |
| [ 0.700505] [drm] Encoders: |
| [ 0.700506] [drm] CRT1: INTERNAL_KLDSCP_DAC1 |
| [ 0.741579] [drm] fb mappable at 0xE0366000 |
| [ 0.741581] [drm] vram apper at 0xE0000000 |
| [ 0.741582] [drm] size 5242880 |
| [ 0.741584] [drm] fb depth is 24 |
| [ 0.741585] [drm] pitch is 5120 |
| [ 0.741891] fbcon: radeondrmfb (fb0) is primary device |
| [ 0.784834] Console: switching to colour frame buffer device 160x64 |
| [ 0.795593] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device |
| [ 0.795713] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0 |
| [ 0.796494] ahci 0000:00:11.0: version 3.0 |
| [ 0.797175] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode |
| [ 0.797182] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part |
| [ 0.799815] scsi host0: ahci |
| [ 0.800562] scsi host1: ahci |
| [ 0.801190] scsi host2: ahci |
| [ 0.801845] scsi host3: ahci |
| [ 0.802289] scsi host4: ahci |
| [ 0.802918] scsi host5: ahci |
| [ 0.803192] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19 |
| [ 0.803196] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19 |
| [ 0.803200] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19 |
| [ 0.803203] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19 |
| [ 0.803207] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19 |
| [ 0.803210] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19 |
| [ 0.803475] ata2: SATA link down (SStatus 0 SControl 0) |
| [ 0.803560] libphy: Fixed MDIO Bus: probed |
| [ 0.803647] usbcore: registered new interface driver usbserial_generic |
| [ 0.803660] usbserial: USB Serial support registered for generic |
| [ 0.803663] ata3: SATA link down (SStatus 0 SControl 0) |
| [ 0.803842] ata4: SATA link down (SStatus 0 SControl 0) |
| [ 0.803892] ata6: SATA link down (SStatus 0 SControl 0) |
| [ 0.803929] ata5: SATA link down (SStatus 0 SControl 0) |
| [ 0.803975] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 0.807882] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.807899] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.808251] mousedev: PS/2 mouse device common for all mice |
| [ 0.808873] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 0) |
| [ 0.808881] rtc_cmos 00:00: RTC can wake from S4 |
| [ 0.809194] ata1.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133 |
| [ 0.809198] ata1.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32) |
| [ 0.809235] rtc_cmos 00:00: registered as rtc0 |
| [ 0.809275] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs |
| [ 0.809395] w83627ehf: Found NCT6775F chip at 0x290 |
| [ 0.809636] ata1.00: configured for UDMA/133 |
| [ 0.809957] w83627ehf w83627ehf.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). |
| [ 0.810092] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5 |
| [ 0.810125] device-mapper: uevent: version 1.0.3 |
| [ 0.810326] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com |
| [ 0.810522] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 0.810626] usbcore: registered new interface driver usbhid |
| [ 0.810627] usbhid: USB HID core driver |
| [ 0.810642] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 0.811015] Initializing XFRM netlink socket |
| [ 0.811038] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) |
| [ 0.811069] sd 0:0:0:0: [sda] Write Protect is off |
| [ 0.811074] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 0.811123] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 0.811333] NET: Registered protocol family 10 |
| [ 0.811910] Segment Routing with IPv6 |
| [ 0.811950] mip6: Mobile IPv6 |
| [ 0.811955] NET: Registered protocol family 17 |
| [ 0.812447] sda: sda1 |
| [ 0.812535] Using IPI No-Shortcut mode |
| [ 0.812558] sched_clock: Marking stable (809287492, 3113261)->(915591794, -103191041) |
| [ 0.813822] registered taskstats version 1 |
| [ 0.813829] Loading compiled-in X.509 certificates |
| [ 0.813887] zswap: loaded using pool lzo/zbud |
| [ 0.813915] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 0.815973] Key type big_key registered |
| [ 0.816499] Magic number: 11:373:120 |
| [ 0.816515] misc device-mapper: hash matches |
| [ 0.816804] rtc_cmos 00:00: setting system clock to 2019-03-05T09:07:41 UTC (1551776861) |
| [ 0.835761] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 |
| [ 0.891055] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 0.891090] VFS: Mounted root (ext4 filesystem) on device 8:1. |
| [ 0.891896] random: 1 |
| [ 0.891900] random: 2 |
| [ 0.891902] random: 3 |
| [ 0.891903] random: 4 |
| [ 0.891905] random: fast init done |
| [ 0.893026] devtmpfs: mounted |
| [ 0.893047] After kernel_init_freeable |
| [ 0.895289] Freeing unused kernel image memory: 1124K |
| [ 0.897878] Write protecting kernel text and read-only data: 11712k |
| [ 0.897882] NX-protecting the kernel data: 5556k |
| [ 0.898563] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 0.898564] After mark_readonly |
| [ 0.898571] After pti_finalize |
| [ 0.898572] rcu_end_inkernel_boot |
| [ 0.898575] Run /sbin/init as init process |
| [ 1.204456] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) |
| [ 1.216767] systemd[1]: Detected architecture x86. |
| [ 1.220881] systemd[1]: Set hostname to <kodi>. |
| [ 1.442590] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. |
| [ 1.442600] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) |
| [ 1.619125] tsc: Refined TSC clocksource calibration: 1600.000 MHz |
| [ 1.619143] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns |
| [ 1.619205] clocksource: Switched to clocksource tsc |
| [ 1.660980] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 1.663945] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 1.664154] systemd[1]: Listening on initctl Compatibility Named Pipe. |
| [ 1.664594] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 1.664954] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 1.674960] systemd[1]: Listening on Process Core Dump Socket. |
| [ 1.675253] systemd[1]: Listening on udev Kernel Socket. |
| [ 1.675311] systemd[1]: Reached target Local File Systems. |
| [ 2.031427] systemd-journald[174]: Received request to flush runtime journal from PID 1 |
| [ 2.247195] perf: interrupt took too long (2518 > 2500), lowering kernel.perf_event_max_sample_rate to 79000 |
| [ 2.252229] perf: interrupt took too long (3315 > 3147), lowering kernel.perf_event_max_sample_rate to 60000 |
| [ 2.262213] perf: interrupt took too long (4157 > 4143), lowering kernel.perf_event_max_sample_rate to 48000 |
| [ 2.276558] perf: interrupt took too long (5244 > 5196), lowering kernel.perf_event_max_sample_rate to 38000 |
| [ 2.290596] perf: interrupt took too long (6563 > 6555), lowering kernel.perf_event_max_sample_rate to 30000 |
| [ 2.317287] perf: interrupt took too long (8315 > 8203), lowering kernel.perf_event_max_sample_rate to 24000 |
| [ 2.355344] perf: interrupt took too long (10416 > 10393), lowering kernel.perf_event_max_sample_rate to 19000 |
| [ 2.403838] acpi_cpufreq: overriding BIOS provided _PSD data |
| [ 2.672739] perf: interrupt took too long (13021 > 13020), lowering kernel.perf_event_max_sample_rate to 15000 |
| [ 2.708036] 1 |
| [ 2.708070] 2 |
| [ 2.708450] 3 |
| [ 2.708451] 4 |
| [ 2.708452] 5 |
| [ 2.708453] 7 |
| [ 2.708459] 8 |
| [ 2.708460] 9 |
| [ 2.708531] 1 |
| [ 2.708543] 2 |
| [ 2.708942] 3 |
| [ 2.708943] 4 |
| [ 2.708944] 5 |
| [ 2.708945] 7 |
| [ 2.708946] 8 |
| [ 2.708947] 9 |
| [ 2.756046] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5 |
| [ 2.760830] snd_hda_codec_realtek hdaudioC1D0: ALC892: SKU not ready 0x00000100 |
| [ 2.761476] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line |
| [ 2.761481] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 2.761484] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| [ 2.761487] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 |
| [ 2.761490] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 |
| [ 2.761492] snd_hda_codec_realtek hdaudioC1D0: inputs: |
| [ 2.761497] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 |
| [ 2.761500] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 |
| [ 2.761503] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a |
| [ 2.761519] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c |
| [ 2.851730] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6 |
| [ 2.851965] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7 |
| [ 2.852270] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input8 |
| [ 2.852441] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input9 |
| [ 2.852607] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input10 |
| [ 2.852741] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input11 |
| [ 2.853042] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input12 |
| [ 2.853583] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13 |
| [ 2.981195] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.999712] ehci-pci: EHCI PCI platform driver |
| [ 3.000321] QUIRK: Enable AMD PLL fix |
| [ 3.000454] ehci-pci 0000:00:12.2: EHCI Host Controller |
| [ 3.000470] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| [ 3.000484] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 3.000592] ehci-pci 0000:00:12.2: debug port 1 |
| [ 3.000689] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014c000 |
| [ 3.002021] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 3.004700] ohci-pci: OHCI PCI platform driver |
| [ 3.008976] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| [ 3.009189] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 |
| [ 3.009193] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 3.009196] usb usb1: Product: EHCI Host Controller |
| [ 3.009199] usb usb1: Manufacturer: Linux 5.0.0-00051-g4cbe15559a19 ehci_hcd |
| [ 3.009201] usb usb1: SerialNumber: 0000:00:12.2 |
| [ 3.009540] hub 1-0:1.0: USB hub found |
| [ 3.009563] hub 1-0:1.0: 5 ports detected |
| [ 3.010460] ohci-pci 0000:00:12.0: OHCI PCI host controller |
| [ 3.010509] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 2 |
| [ 3.010610] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000 |
| [ 3.032291] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 |
| [ 3.032305] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection |
| [ 3.032594] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x8060 |
| [ 3.066170] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00 |
| [ 3.066177] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 3.066180] usb usb2: Product: OHCI PCI host controller |
| [ 3.066183] usb usb2: Manufacturer: Linux 5.0.0-00051-g4cbe15559a19 ohci_hcd |
| [ 3.066186] usb usb2: SerialNumber: 0000:00:12.0 |
| [ 3.066535] hub 2-0:1.0: USB hub found |
| [ 3.066592] hub 2-0:1.0: 5 ports detected |
| [ 3.069916] ehci-pci 0000:00:13.2: EHCI Host Controller |
| [ 3.069944] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 |
| [ 3.069959] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 3.070027] ehci-pci 0000:00:13.2: debug port 1 |
| [ 3.070094] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014d000 |
| [ 3.076904] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| [ 3.077078] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 |
| [ 3.077082] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 3.077085] usb usb3: Product: EHCI Host Controller |
| [ 3.077088] usb usb3: Manufacturer: Linux 5.0.0-00051-g4cbe15559a19 ehci_hcd |
| [ 3.077091] usb usb3: SerialNumber: 0000:00:13.2 |
| [ 3.077495] hub 3-0:1.0: USB hub found |
| [ 3.077518] hub 3-0:1.0: 5 ports detected |
| [ 3.078026] ohci-pci 0000:00:13.0: OHCI PCI host controller |
| [ 3.078066] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4 |
| [ 3.078136] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000 |
| [ 3.138717] libphy: r8169: probed |
| [ 3.138800] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00 |
| [ 3.138807] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 3.138811] usb usb4: Product: OHCI PCI host controller |
| [ 3.138814] usb usb4: Manufacturer: Linux 5.0.0-00051-g4cbe15559a19 ohci_hcd |
| [ 3.138816] usb usb4: SerialNumber: 0000:00:13.0 |
| [ 3.139205] hub 4-0:1.0: USB hub found |
| [ 3.139227] hub 4-0:1.0: 5 ports detected |
| [ 3.140251] ohci-pci 0000:00:14.5: OHCI PCI host controller |
| [ 3.140266] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5 |
| [ 3.140323] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000 |
| [ 3.143399] r8169 0000:03:00.0 eth0: RTL8168e/8111e, bc:5f:f4:c8:d3:98, XID 2c2, IRQ 28 |
| [ 3.143406] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| [ 3.196199] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00 |
| [ 3.196206] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 3.196210] usb usb5: Product: OHCI PCI host controller |
| [ 3.196213] usb usb5: Manufacturer: Linux 5.0.0-00051-g4cbe15559a19 ohci_hcd |
| [ 3.196215] usb usb5: SerialNumber: 0000:00:14.5 |
| [ 3.196571] hub 5-0:1.0: USB hub found |
| [ 3.196662] hub 5-0:1.0: 2 ports detected |
| [ 3.489927] usb 2-2: new low-speed USB device number 2 using ohci-pci |
| [ 3.655099] usb 2-2: New USB device found, idVendor=1241, idProduct=1122, bcdDevice= 1.00 |
| [ 3.655106] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.664770] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb2/2-2/2-2:1.0/0003:1241:1122.0001/input/input14 |
| [ 3.665341] hid-generic 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-2/input0 |
| [ 3.861171] random: crng init done |
| [ 3.861179] random: 7 urandom warning(s) missed due to ratelimiting |
| [ 4.111848] r8169 0000:03:00.0 enp3s0: renamed from eth0 |
| [ 4.176858] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168e-2.fw failed with error -2 |
| [ 4.176927] r8169 0000:03:00.0 enp3s0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2) |
| [ 4.177391] RTL8211DN Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) |
| [ 4.266902] A link change request failed with some changes committed already. Interface enp3s0 may have been left with an inconsistent configuration, please check. |
| [ 4.268951] r8169 0000:03:00.0 enp3s0: Link is Down |
| [ 6.821005] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx |
| [ 6.821025] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready |