| [ 0.000000] Linux version 5.2.0-rc6-00138-g5ad9d0ebfc1e (root@ee888abba79b) (gcc version 8.3.0 (Debian 8.3.0-7)) #57 SMP Fri Jun 28 17:27:42 UTC 2019 |
| [ 0.000000] x86/fpu: x87 FPU will use FXSAVE |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7d43fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000c7d44000-0x00000000c7ffffff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x00000000c8000000-0x00000000dfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable |
| [ 0.000000] kmemleak: Kernel memory leak detector disabled |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.9-2216-g479637d8a2 06/28/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1600.013 MHz processor |
| [ 0.005999] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.006003] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.006013] last_pfn = 0x11f000 max_arch_pfn = 0x1000000 |
| [ 0.006023] MTRR default type: uncachable |
| [ 0.006025] MTRR fixed ranges enabled: |
| [ 0.006028] 00000-9FFFF write-back |
| [ 0.006031] A0000-BFFFF uncachable |
| [ 0.006033] C0000-FFFFF write-back |
| [ 0.006035] MTRR variable ranges enabled: |
| [ 0.006039] 0 base 0FFC00000 mask FFFC00000 write-protect |
| [ 0.006041] 1 base 0C0000000 mask FF8000000 write-back |
| [ 0.006044] 2 base 080000000 mask FC0000000 write-back |
| [ 0.006046] 3 base 000000000 mask F80000000 write-back |
| [ 0.006048] 4 disabled |
| [ 0.006049] 5 disabled |
| [ 0.006051] 6 disabled |
| [ 0.006052] 7 disabled |
| [ 0.006055] TOM2: 000000011f000000 aka 4592M |
| [ 0.006253] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.006342] initial memory mapped: [mem 0x00000000-0x0a3fffff] |
| [ 0.006499] BRK [0x09e89000, 0x09e89fff] PGTABLE |
| [ 0.006520] BRK [0x09e8a000, 0x09e8afff] PGTABLE |
| [ 0.006532] ACPI: Early table checksum verification disabled |
| [ 0.006650] ACPI: RSDP 0x00000000000F0800 000024 (v02 COREv4) |
| [ 0.006657] ACPI: XSDT 0x00000000C7D450E0 000064 (v01 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006671] ACPI: FACP 0x00000000C7D477D0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006684] ACPI: DSDT 0x00000000C7D45280 002549 (v02 COREv4 COREBOOT 00010001 INTL 20190509) |
| [ 0.006691] ACPI: FACS 0x00000000C7D45240 000040 |
| [ 0.006696] ACPI: FACS 0x00000000C7D45240 000040 |
| [ 0.006701] ACPI: SSDT 0x00000000C7D478D0 00008A (v02 COREv4 COREBOOT 0000002A CORE 20190509) |
| [ 0.006707] ACPI: APIC 0x00000000C7D47960 00005C (v02 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006713] ACPI: HEST 0x00000000C7D479C0 000028 (v01 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006720] ACPI: SSDT 0x00000000C7D479F0 00168E (v02 AMD ALIB 00000001 MSFT 04000000) |
| [ 0.006726] ACPI: SSDT 0x00000000C7D49080 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001) |
| [ 0.006733] ACPI: VFCT 0x00000000C7D49460 00E269 (v01 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006739] ACPI: HPET 0x00000000C7D576D0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006757] ACPI: Local APIC address 0xfee00000 |
| [ 0.006765] 3706MB HIGHMEM available. |
| [ 0.006769] 885MB LOWMEM available. |
| [ 0.006770] mapped low ram: 0 - 375fe000 |
| [ 0.006772] low ram: 0 - 375fe000 |
| [ 0.006784] BRK [0x09e8b000, 0x09e8bfff] PGTABLE |
| [ 0.017457] Zone ranges: |
| [ 0.017460] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.017463] Normal [mem 0x0000000001000000-0x00000000375fdfff] |
| [ 0.017466] HighMem [mem 0x00000000375fe000-0x000000011effffff] |
| [ 0.017468] Movable zone start for each node |
| [ 0.017469] Early memory node ranges |
| [ 0.017471] node 0: [mem 0x0000000000001000-0x000000000009ffff] |
| [ 0.017473] node 0: [mem 0x0000000000100000-0x00000000c7d43fff] |
| [ 0.017475] node 0: [mem 0x0000000100000000-0x000000011effffff] |
| [ 0.021619] Zeroed struct page in unavailable ranges: 99101 pages |
| [ 0.021623] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff] |
| [ 0.021628] On node 0 totalpages: 945379 |
| [ 0.021631] DMA zone: 40 pages used for memmap |
| [ 0.021632] DMA zone: 0 pages reserved |
| [ 0.021634] DMA zone: 3999 pages, LIFO batch:0 |
| [ 0.021830] Normal zone: 2175 pages used for memmap |
| [ 0.021832] Normal zone: 222718 pages, LIFO batch:63 |
| [ 0.032267] HighMem zone: 718662 pages, LIFO batch:63 |
| [ 0.071478] Using APIC driver default |
| [ 0.071755] ACPI: Local APIC address 0xfee00000 |
| [ 0.071778] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 |
| [ 0.071782] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.071786] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| [ 0.071789] ACPI: IRQ0 used by override. |
| [ 0.071791] ACPI: IRQ9 used by override. |
| [ 0.071796] Using ACPI (MADT) for SMP configuration information |
| [ 0.071799] ACPI: HPET id: 0x43538210 base: 0xfed00000 |
| [ 0.071809] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| [ 0.071836] [mem 0xe0000000-0xf7ffffff] available for PCI devices |
| [ 0.071844] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns |
| [ 0.071848] After setup_arch |
| [ 0.071849] After mm_init_cpumask |
| [ 0.071858] After setup_command_line |
| [ 0.071859] After setup_nr_cpu_ids |
| [ 0.071861] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 |
| [ 0.072124] percpu: Embedded 33 pages/cpu s103308 r0 d31860 u135168 |
| [ 0.072136] pcpu-alloc: s103308 r0 d31860 u135168 alloc=33*4096 |
| [ 0.072139] pcpu-alloc: [0] 0 [0] 1 |
| [ 0.072164] After setup_per_cpu_areas |
| [ 0.072166] After smp_perpare_boot_cpu |
| [ 0.072167] After boot_cpu_hotplug_init |
| [ 0.072173] Built 1 zonelists, mobility grouping on. Total pages: 943164 |
| [ 0.072177] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.2.0-rc6-00138-g5ad9d0ebfc1e root=/dev/sda1 rw noisapnp cryptomgr.notests quiet iomem=relaxed apparmor=0 selinux=0 kmemleak=off initcall_blacklist=serial8250_init udev.children_max=2 udev.log_priority=info |
| [ 0.072448] blacklisting initcall serial8250_init |
| [ 0.072792] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) |
| [ 0.072964] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) |
| [ 0.072975] Initializing CPU#0 |
| [ 0.107726] Initializing HighMem for node 0 (000375fe:0011f000) |
| [ 0.107729] add_highpages_with_active_regions: start_pfn = 226814, end_pfn = 1175552 |
| [ 0.107733] add_highpages_with_active_regions: for_each_free_mem_range: i = 8589934592, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107736] add_highpages_with_active_regions: for_each_free_mem_range: i = 12884901889, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107738] add_highpages_with_active_regions: for_each_free_mem_range: i = 17179869185, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107741] add_highpages_with_active_regions: for_each_free_mem_range: i = 21474836481, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107743] add_highpages_with_active_regions: for_each_free_mem_range: i = 25769803777, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107745] add_highpages_with_active_regions: for_each_free_mem_range: i = 30064771073, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107747] add_highpages_with_active_regions: for_each_free_mem_range: i = 34359738369, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107750] add_highpages_with_active_regions: for_each_free_mem_range: i = 38654705665, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107752] add_highpages_with_active_regions: for_each_free_mem_range: i = 42949672961, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107754] add_highpages_with_active_regions: for_each_free_mem_range: i = 47244640257, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107757] add_highpages_with_active_regions: for_each_free_mem_range: i = 51539607553, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107759] add_highpages_with_active_regions: for_each_free_mem_range: i = 55834574849, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107761] add_highpages_with_active_regions: for_each_free_mem_range: i = 60129542145, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107763] add_highpages_with_active_regions: for_each_free_mem_range: i = 64424509441, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107766] add_highpages_with_active_regions: for_each_free_mem_range: i = 68719476737, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107768] add_highpages_with_active_regions: for_each_free_mem_range: i = 73014444033, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107770] add_highpages_with_active_regions: for_each_free_mem_range: i = 77309411329, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107773] add_highpages_with_active_regions: for_each_free_mem_range: i = 81604378625, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107775] add_highpages_with_active_regions: for_each_free_mem_range: i = 85899345921, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107777] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313217, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107779] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313218, nid = 0, pfn = 226814, e_pfn = 818500, before for loop |
| [ 0.294131] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313219, nid = 0, pfn = 1048576, e_pfn = 1175552, before for loop |
| [ 0.334144] Initializing Movable for node 0 (00000000:00000000) |
| [ 0.334146] add_highpages_with_active_regions: start_pfn = 0, end_pfn = 0 |
| [ 0.334150] add_highpages_with_active_regions: for_each_free_mem_range: i = 8589934592, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334152] add_highpages_with_active_regions: for_each_free_mem_range: i = 12884901889, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334155] add_highpages_with_active_regions: for_each_free_mem_range: i = 17179869185, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334157] add_highpages_with_active_regions: for_each_free_mem_range: i = 21474836481, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334159] add_highpages_with_active_regions: for_each_free_mem_range: i = 25769803777, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334162] add_highpages_with_active_regions: for_each_free_mem_range: i = 30064771073, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334164] add_highpages_with_active_regions: for_each_free_mem_range: i = 34359738369, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334166] add_highpages_with_active_regions: for_each_free_mem_range: i = 38654705665, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334168] add_highpages_with_active_regions: for_each_free_mem_range: i = 42949672961, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334171] add_highpages_with_active_regions: for_each_free_mem_range: i = 47244640257, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334173] add_highpages_with_active_regions: for_each_free_mem_range: i = 51539607553, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334175] add_highpages_with_active_regions: for_each_free_mem_range: i = 55834574849, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334177] add_highpages_with_active_regions: for_each_free_mem_range: i = 60129542145, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334179] add_highpages_with_active_regions: for_each_free_mem_range: i = 64424509441, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334181] add_highpages_with_active_regions: for_each_free_mem_range: i = 68719476737, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334184] add_highpages_with_active_regions: for_each_free_mem_range: i = 73014444033, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334186] add_highpages_with_active_regions: for_each_free_mem_range: i = 77309411329, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334188] add_highpages_with_active_regions: for_each_free_mem_range: i = 81604378625, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334190] add_highpages_with_active_regions: for_each_free_mem_range: i = 85899345921, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334192] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313217, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334195] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313218, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334197] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313219, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340598] Memory: 3646308K/3781516K available (8968K kernel code, 746K rwdata, 2912K rodata, 1144K init, 640K bss, 135208K reserved, 0K cma-reserved, 2874648K highmem) |
| [ 0.340609] virtual kernel memory layout: |
| fixmap : 0xfff91000 - 0xfffff000 ( 440 kB) |
| cpu_entry : 0xffa00000 - 0xffa4d000 ( 308 kB) |
| pkmap : 0xff600000 - 0xff800000 (2048 kB) |
| vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB) |
| lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB) |
| .init : 0xc9c6f000 - 0xc9d8d000 (1144 kB) |
| .data : 0xc98c2018 - 0xc9c5ca40 (3690 kB) |
| .text : 0xc9000000 - 0xc98c2018 (8968 kB) |
| [ 0.340611] Checking if this processor honours the WP bit even in supervisor mode...Ok. |
| [ 0.340768] random: get_random_u32 called from cache_random_seq_create+0x7e/0x110 with crng_init=0 |
| [ 0.341046] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 |
| [ 0.341079] After mm_init |
| [ 0.341082] ftrace: allocating 34260 entries in 67 pages |
| [ 0.367611] After sched_init |
| [ 0.367674] rcu: Hierarchical RCU implementation. |
| [ 0.367675] rcu: RCU event tracing is enabled. |
| [ 0.367679] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. |
| [ 0.367690] After rcu_init |
| [ 0.374891] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16 |
| [ 0.375457] After add_latent_entropy |
| [ 0.375474] After add_device_randomness |
| [ 0.375477] After boot_init_stack_canary |
| [ 0.377953] Console: colour VGA+ 80x25 |
| [ 0.377965] printk: console [tty0] enabled |
| [ 0.378013] ACPI: Core revision 20190509 |
| [ 0.378589] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns |
| [ 0.378609] hpet clockevent registered |
| [ 0.378619] APIC: Switch to symmetric I/O mode setup |
| [ 0.378621] Enabling APIC mode: Flat. Using 1 I/O APICs |
| [ 0.379130] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| [ 0.383689] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1710312f8b3, max_idle_ns: 440795223402 ns |
| [ 0.383700] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.02 BogoMIPS (lpj=1600013) |
| [ 0.383705] pid_max: default: 32768 minimum: 301 |
| [ 0.383797] LSM: Security Framework initializing |
| [ 0.383838] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) |
| [ 0.383844] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) |
| [ 0.384173] *** VALIDATE proc *** |
| [ 0.384288] *** VALIDATE cgroup1 *** |
| [ 0.384291] *** VALIDATE cgroup2 *** |
| [ 0.384388] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| [ 0.384390] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 |
| [ 0.384397] Spectre V2 : Mitigation: Full AMD retpoline |
| [ 0.384398] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.384400] Speculative Store Bypass: Vulnerable |
| [ 0.384639] Freeing SMP alternatives memory: 32K |
| [ 0.384641] After check_bugs |
| [ 0.384645] After acpi_subsystem_init |
| [ 0.384647] After arch_post_acpi_subsys_init |
| [ 0.384648] After sfi_init_late |
| [ 0.384650] After rcu_scheduler_starting |
| [ 0.384791] After find_task_by_pid_ns |
| [ 0.384793] After numa_default_policy |
| [ 0.384827] After rcu_read_lock |
| [ 0.384828] After rcu_read_unlock |
| [ 0.384834] After kthreadd_done |
| [ 0.385693] random: 1 |
| [ 0.385693] random: 2 |
| [ 0.385693] random: 3 |
| [ 0.385693] random: 4 |
| [ 0.404696] random: 1 |
| [ 0.404696] random: 2 |
| [ 0.404698] random: 3 |
| [ 0.404699] random: 4 |
| [ 0.468695] random: 1 |
| [ 0.468696] random: 2 |
| [ 0.468698] random: 3 |
| [ 0.468698] random: 4 |
| [ 0.486693] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (family: 0x14, model: 0x2, stepping: 0x0) |
| [ 0.486693] Performance Events: AMD PMU driver. |
| [ 0.486693] ... version: 0 |
| [ 0.486693] ... bit width: 48 |
| [ 0.486693] ... generic registers: 4 |
| [ 0.486693] ... value mask: 0000ffffffffffff |
| [ 0.486693] ... max period: 00007fffffffffff |
| [ 0.486693] ... fixed-purpose events: 0 |
| [ 0.486693] ... event mask: 000000000000000f |
| [ 0.486693] rcu: Hierarchical SRCU implementation. |
| [ 0.486881] smp: Bringing up secondary CPUs ... |
| [ 0.487141] x86: Booting SMP configuration: |
| [ 0.487144] .... node #0, CPUs: #1 |
| [ 0.004324] Initializing CPU#1 |
| [ 0.487752] After schedule_preempt_disabled |
| [ 0.487775] smp: Brought up 1 node, 2 CPUs |
| [ 0.487775] smpboot: Max logical packages: 1 |
| [ 0.487775] smpboot: Total of 2 processors activated (6400.05 BogoMIPS) |
| [ 0.489764] devtmpfs: initialized |
| [ 0.490702] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns |
| [ 0.490702] futex hash table entries: 512 (order: 3, 32768 bytes) |
| [ 0.490702] pinctrl core: initialized pinctrl subsystem |
| [ 0.490702] PM: RTC time: 17:44:03, date: 2019-06-28 |
| [ 0.490702] NET: Registered protocol family 16 |
| [ 0.491040] audit: initializing netlink subsys (disabled) |
| [ 0.491749] audit: type=2000 audit(1561743843.113:1): state=initialized audit_enabled=0 res=1 |
| [ 0.491954] cpuidle: using governor menu |
| [ 0.491954] ACPI: bus type PCI registered |
| [ 0.492907] PCI: Using configuration type 1 for base access |
| [ 0.492908] PCI: Using configuration type 1 for extended access |
| [ 0.493223] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.493224] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.493225] mtrr: corrected configuration. |
| [ 0.497789] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.497789] alg: self-tests disabled |
| [ 0.499789] cryptd: max_cpu_qlen set to 1000 |
| [ 0.502863] ACPI: Added _OSI(Module Device) |
| [ 0.502866] ACPI: Added _OSI(Processor Device) |
| [ 0.502868] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.502870] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.502872] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.502875] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.502877] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.514688] ACPI: 4 ACPI AML tables successfully acquired and loaded |
| [ 0.517774] ACPI: Interpreter enabled |
| [ 0.517821] ACPI: (supports S0 S1 S3 S5) |
| [ 0.517824] ACPI: Using IOAPIC for interrupt routing |
| [ 0.517865] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.518292] ACPI: Enabled 18 GPEs in block 00 to 1F |
| [ 0.527647] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.527662] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| [ 0.527834] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] |
| [ 0.528283] PCI host bridge to bus 0000:00 |
| [ 0.528289] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.528293] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.528304] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.528307] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] |
| [ 0.528311] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.528329] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 |
| [ 0.528615] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000 |
| [ 0.528640] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] |
| [ 0.528650] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff] |
| [ 0.528659] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff] |
| [ 0.528699] pci 0000:00:01.0: enabling Extended Tags |
| [ 0.528751] pci 0000:00:01.0: supports D1 D2 |
| [ 0.528990] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300 |
| [ 0.529013] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff] |
| [ 0.529055] pci 0000:00:01.1: enabling Extended Tags |
| [ 0.529104] pci 0000:00:01.1: supports D1 D2 |
| [ 0.529440] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 |
| [ 0.529470] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417] |
| [ 0.529484] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423] |
| [ 0.529497] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f] |
| [ 0.529511] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427] |
| [ 0.529524] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f] |
| [ 0.529538] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff] |
| [ 0.529896] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.529921] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff] |
| [ 0.530290] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.530321] pci 0000:00:12.2: reg 0x10: [mem 0xf014c000-0xf014c0ff] |
| [ 0.530433] pci 0000:00:12.2: supports D1 D2 |
| [ 0.530436] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.530438] pci 0000:00:12.2: pme_poll = true |
| [ 0.530441] pci 0000:00:12.2: after device_set_wakeup_capable() |
| [ 0.530447] pci 0000:00:12.2: after pci_pme_active() |
| [ 0.530718] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.530744] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff] |
| [ 0.531120] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.531150] pci 0000:00:13.2: reg 0x10: [mem 0xf014d000-0xf014d0ff] |
| [ 0.531262] pci 0000:00:13.2: supports D1 D2 |
| [ 0.531265] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.531267] pci 0000:00:13.2: pme_poll = true |
| [ 0.531269] pci 0000:00:13.2: after device_set_wakeup_capable() |
| [ 0.531274] pci 0000:00:13.2: after pci_pme_active() |
| [ 0.531578] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 |
| [ 0.532010] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 |
| [ 0.532044] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit] |
| [ 0.532140] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold |
| [ 0.532142] pci 0000:00:14.2: pme_poll = true |
| [ 0.532144] pci 0000:00:14.2: after device_set_wakeup_capable() |
| [ 0.532149] pci 0000:00:14.2: after pci_pme_active() |
| [ 0.532441] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 |
| [ 0.532832] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 |
| [ 0.533187] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 |
| [ 0.533212] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff] |
| [ 0.533592] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 |
| [ 0.533652] pci 0000:00:15.0: enabling Extended Tags |
| [ 0.533739] pci 0000:00:15.0: supports D1 D2 |
| [ 0.534064] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 |
| [ 0.534132] pci 0000:00:15.1: enabling Extended Tags |
| [ 0.534207] pci 0000:00:15.1: supports D1 D2 |
| [ 0.534536] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 |
| [ 0.534799] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 |
| [ 0.535041] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 |
| [ 0.535280] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 |
| [ 0.535549] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 |
| [ 0.535800] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 |
| [ 0.536041] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 |
| [ 0.536278] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 |
| [ 0.536613] pci_bus 0000:01: extended config space not accessible |
| [ 0.536715] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) |
| [ 0.536729] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) |
| [ 0.536733] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) |
| [ 0.536736] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| [ 0.536740] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode) |
| [ 0.536826] pci 0000:00:15.0: PCI bridge to [bus 02] |
| [ 0.536936] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 0.536980] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff] |
| [ 0.537019] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref] |
| [ 0.537044] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] |
| [ 0.537197] pci 0000:03:00.0: supports D1 D2 |
| [ 0.537199] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.537202] pci 0000:03:00.0: pme_poll = true |
| [ 0.537204] pci 0000:03:00.0: after device_set_wakeup_capable() |
| [ 0.537211] pci 0000:03:00.0: after pci_pme_active() |
| [ 0.540811] pci 0000:00:15.1: PCI bridge to [bus 03] |
| [ 0.540830] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff] |
| [ 0.540847] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.540892] pci_bus 0000:00: on NUMA node 0 |
| [ 0.542485] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.542853] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.543175] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.543495] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.543827] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.544147] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled. |
| [ 0.544463] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.544732] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.545736] pci 0000:00:01.0: vgaarb: setting as boot VGA device |
| [ 0.545745] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.545767] pci 0000:00:01.0: vgaarb: bridge control possible |
| [ 0.545771] vgaarb: loaded |
| [ 0.546039] SCSI subsystem initialized |
| [ 0.546081] libata version 3.00 loaded. |
| [ 0.546081] ACPI: bus type USB registered |
| [ 0.546081] usbcore: registered new interface driver usbfs |
| [ 0.546081] usbcore: registered new interface driver hub |
| [ 0.546081] usbcore: registered new device driver usb |
| [ 0.546749] PCI: Using ACPI for IRQ routing |
| [ 0.546753] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.546911] e820: reserve RAM buffer [mem 0xc7d44000-0xc7ffffff] |
| [ 0.546915] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff] |
| [ 0.547241] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| [ 0.547241] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| [ 0.548778] clocksource: Switched to clocksource tsc-early |
| [ 0.579712] VFS: Disk quotas dquot_6.6.0 |
| [ 0.579751] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
| [ 0.579819] *** VALIDATE hugetlbfs *** |
| [ 0.579896] pnp: PnP ACPI init |
| [ 0.580703] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.580806] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.580890] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.581558] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.581643] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.581673] pnp: PnP ACPI: found 5 devices |
| [ 0.586631] pci 0000:00:14.4: PCI bridge to [bus 01] |
| [ 0.586722] pci 0000:00:15.0: PCI bridge to [bus 02] |
| [ 0.586738] pci 0000:00:15.1: PCI bridge to [bus 03] |
| [ 0.586744] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff] |
| [ 0.586755] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.586767] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.586770] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.586774] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.586777] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.586780] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.586783] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window] |
| [ 0.586786] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.586790] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.586793] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] |
| [ 0.586796] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.586967] NET: Registered protocol family 2 |
| [ 0.587291] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) |
| [ 0.587301] TCP established hash table entries: 8192 (order: 3, 32768 bytes) |
| [ 0.587329] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.587393] TCP: Hash tables configured (established 8192 bind 8192) |
| [ 0.587455] UDP hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.587470] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.587567] NET: Registered protocol family 1 |
| [ 0.587614] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.590694] PCI: CLS 64 bytes, default 64 |
| [ 0.590824] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.590828] software IO TLB: mapped [mem 0x2f9fd000-0x339fd000] (64MB) |
| [ 0.591025] LVT offset 0 assigned for vector 0x400 |
| [ 0.591084] perf: AMD IBS detected (0x000000ff) |
| [ 0.592710] Initialise system trusted keyrings |
| [ 0.592831] workingset: timestamp_bits=14 max_order=20 bucket_order=6 |
| [ 0.596187] zbud: loaded |
| [ 0.597027] NET: Registered protocol family 38 |
| [ 0.597039] Key type asymmetric registered |
| [ 0.597043] Asymmetric key parser 'x509' registered |
| [ 0.597065] bounce: pool size: 64 pages |
| [ 0.597082] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) |
| [ 0.597283] io scheduler mq-deadline registered |
| [ 0.597287] io scheduler kyber registered |
| [ 0.598282] pcieport 0000:00:15.0: PME: Signaling with IRQ 24 |
| [ 0.598950] pcieport 0000:00:15.1: PME: Signaling with IRQ 25 |
| [ 0.599204] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 |
| [ 0.599239] ACPI: Power Button [PWRF] |
| [ 0.600802] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 0.600806] ACPI: Thermal Zone [TZ00] (46 C) |
| [ 0.601016] initcall serial8250_init blacklisted |
| [ 0.601611] Non-volatile memory driver v1.3 |
| [ 0.601759] Linux agpgart interface v0.103 |
| [ 0.602449] [drm] radeon kernel modesetting enabled. |
| [ 0.602484] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff |
| [ 0.602488] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0100000 -> 0xf013ffff |
| [ 0.602492] radeon 0000:00:01.0: vgaarb: deactivate vga console |
| [ 0.603292] Console: switching to colour dummy device 80x25 |
| [ 0.604232] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802 0x00). |
| [ 0.604307] ATOM BIOS: AMD |
| [ 0.604379] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) |
| [ 0.604383] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF |
| [ 0.604391] [drm] Detected VRAM RAM=384M, BAR=256M |
| [ 0.604392] [drm] RAM width 32bits DDR |
| [ 0.604656] [TTM] Zone kernel: Available graphics memory: 385846 KiB |
| [ 0.604658] [TTM] Zone highmem: Available graphics memory: 1823170 KiB |
| [ 0.604659] [TTM] Initializing pool allocator |
| [ 0.604668] [TTM] Initializing DMA pool allocator |
| [ 0.604740] [drm] radeon: 384M of VRAM memory ready |
| [ 0.604743] [drm] radeon: 1024M of GTT memory ready. |
| [ 0.604759] [drm] Loading PALM Microcode |
| [ 0.604768] [drm] Internal thermal controller without fan control |
| [ 0.604833] [drm] Found smc ucode version: 0x00010601 |
| [ 0.604902] [drm] radeon: dpm initialized |
| [ 0.604936] [drm] GART: num cpu pages 262144, num gpu pages 262144 |
| [ 0.619839] [drm] GART: Restore entries: num cpu pages 262144, num gpu pages 262144 |
| [ 0.624939] [drm] GART: Done restoring entries |
| [ 0.624947] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). |
| [ 0.625137] radeon 0000:00:01.0: WB enabled |
| [ 0.625144] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0x(ptrval) |
| [ 0.625148] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0x(ptrval) |
| [ 0.626027] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x(ptrval) |
| [ 0.626031] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 0.626032] [drm] Driver supports precise vblank timestamp query. |
| [ 0.626035] radeon 0000:00:01.0: radeon: MSI limited to 32-bit |
| [ 0.626116] radeon 0000:00:01.0: radeon: using MSI. |
| [ 0.626155] [drm] radeon: irq initialized. |
| [ 0.642840] [drm] ring test on 0 succeeded in 1 usecs |
| [ 0.642848] [drm] ring test on 3 succeeded in 3 usecs |
| [ 0.656908] [drm] ring test on 5 succeeded in 1 usecs |
| [ 0.658927] [drm] UVD initialized successfully. |
| [ 0.659144] [drm] ib test on ring 0 succeeded in 0 usecs |
| [ 0.659201] [drm] ib test on ring 3 succeeded in 0 usecs |
| [ 0.671806] [drm] ib test on ring 5 succeeded |
| [ 0.674523] [drm] Radeon Display Connectors |
| [ 0.674525] [drm] Connector 0: |
| [ 0.674526] [drm] HDMI-A-1 |
| [ 0.674527] [drm] HPD1 |
| [ 0.674530] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c |
| [ 0.674531] [drm] Encoders: |
| [ 0.674533] [drm] DFP1: INTERNAL_UNIPHY |
| [ 0.674535] [drm] Connector 1: |
| [ 0.674535] [drm] HDMI-A-2 |
| [ 0.674537] [drm] HPD2 |
| [ 0.674539] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c |
| [ 0.674540] [drm] Encoders: |
| [ 0.674541] [drm] DFP2: INTERNAL_UNIPHY |
| [ 0.674542] [drm] Connector 2: |
| [ 0.674543] [drm] VGA-1 |
| [ 0.674546] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 |
| [ 0.674547] [drm] Encoders: |
| [ 0.674548] [drm] CRT1: INTERNAL_KLDSCP_DAC1 |
| [ 0.715814] [drm] fb mappable at 0xE0366000 |
| [ 0.715818] [drm] vram apper at 0xE0000000 |
| [ 0.715819] [drm] size 5242880 |
| [ 0.715820] [drm] fb depth is 24 |
| [ 0.715822] [drm] pitch is 5120 |
| [ 0.716210] fbcon: radeondrmfb (fb0) is primary device |
| [ 0.738235] Console: switching to colour frame buffer device 160x64 |
| [ 0.749002] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device |
| [ 0.749131] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0 |
| [ 0.749970] ahci 0000:00:11.0: version 3.0 |
| [ 0.750746] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode |
| [ 0.750752] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part |
| [ 0.753318] scsi host0: ahci |
| [ 0.754058] scsi host1: ahci |
| [ 0.754858] scsi host2: ahci |
| [ 0.755332] scsi host3: ahci |
| [ 0.755813] scsi host4: ahci |
| [ 0.756304] scsi host5: ahci |
| [ 0.756566] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19 |
| [ 0.756571] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19 |
| [ 0.756574] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19 |
| [ 0.756577] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19 |
| [ 0.756581] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19 |
| [ 0.756584] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19 |
| [ 0.756811] ata2: SATA link down (SStatus 0 SControl 0) |
| [ 0.756943] libphy: Fixed MDIO Bus: probed |
| [ 0.756998] ata3: SATA link down (SStatus 0 SControl 0) |
| [ 0.757022] usbcore: registered new interface driver usbserial_generic |
| [ 0.757036] usbserial: USB Serial support registered for generic |
| [ 0.757171] ata4: SATA link down (SStatus 0 SControl 0) |
| [ 0.757224] ata6: SATA link down (SStatus 0 SControl 0) |
| [ 0.757272] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 0.759567] ata5: SATA link down (SStatus 0 SControl 0) |
| [ 0.761270] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.761289] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.761851] mousedev: PS/2 mouse device common for all mice |
| [ 0.762380] rtc_cmos 00:00: RTC can wake from S4 |
| [ 0.762725] rtc_cmos 00:00: registered as rtc0 |
| [ 0.762822] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs |
| [ 0.762959] w83627ehf: Found NCT6775F chip at 0x290 |
| [ 0.763420] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 0) |
| [ 0.763543] w83627ehf w83627ehf.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). |
| [ 0.763679] device-mapper: uevent: version 1.0.3 |
| [ 0.763807] ata1.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133 |
| [ 0.763811] ata1.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32) |
| [ 0.763947] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com |
| [ 0.764130] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 0.764254] usbcore: registered new interface driver usbhid |
| [ 0.764255] usbhid: USB HID core driver |
| [ 0.764519] ata1.00: configured for UDMA/133 |
| [ 0.764720] Initializing XFRM netlink socket |
| [ 0.765014] NET: Registered protocol family 10 |
| [ 0.765125] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5 |
| [ 0.765673] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 0.765929] Segment Routing with IPv6 |
| [ 0.765969] mip6: Mobile IPv6 |
| [ 0.765974] NET: Registered protocol family 17 |
| [ 0.766078] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) |
| [ 0.766183] sd 0:0:0:0: [sda] Write Protect is off |
| [ 0.766187] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 0.766238] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 0.766450] mce: Using 6 MCE banks |
| [ 0.766504] Using IPI No-Shortcut mode |
| [ 0.766528] sched_clock: Marking stable (762923761, 3324148)->(870234023, -103986114) |
| [ 0.766942] registered taskstats version 1 |
| [ 0.766945] Loading compiled-in X.509 certificates |
| [ 0.766989] zswap: loaded using pool lzo/zbud |
| [ 0.767624] PM: Magic number: 7:592:745 |
| [ 0.767716] sda: sda1 |
| [ 0.767905] rtc_cmos 00:00: setting system clock to 2019-06-28T17:44:03 UTC (1561743843) |
| [ 0.768934] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 0.789439] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 |
| [ 0.800818] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 0.800864] VFS: Mounted root (ext4 filesystem) on device 8:1. |
| [ 0.801812] random: 1 |
| [ 0.801813] random: 2 |
| [ 0.801815] random: 3 |
| [ 0.801816] random: 4 |
| [ 0.801819] random: fast init done |
| [ 0.803121] devtmpfs: mounted |
| [ 0.803143] After kernel_init_freeable |
| [ 0.805390] Freeing unused kernel image memory: 1144K |
| [ 0.805650] Write protecting kernel text and read-only data: 11912k |
| [ 0.805652] NX-protecting the kernel data: 5364k |
| [ 0.806432] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 0.806434] After mark_readonly |
| [ 0.806441] After pti_finalize |
| [ 0.806443] rcu_end_inkernel_boot |
| [ 0.806445] Run /sbin/init as init process |
| [ 1.158704] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) |
| [ 1.171641] systemd[1]: Detected architecture x86. |
| [ 1.172525] systemd[1]: Set hostname to <kodi>. |
| [ 1.175917] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument |
| [ 1.626930] tsc: Refined TSC clocksource calibration: 1599.999 MHz |
| [ 1.626947] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171023f09ff, max_idle_ns: 440795233615 ns |
| [ 1.626980] clocksource: Switched to clocksource tsc |
| [ 1.633337] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 1.633434] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. |
| [ 1.633442] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) |
| [ 1.635994] systemd[1]: Created slice system-getty.slice. |
| [ 1.636509] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 1.636850] systemd[1]: Listening on Network Service Netlink Socket. |
| [ 1.637085] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 1.637462] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 1.637691] systemd[1]: Listening on initctl Compatibility Named Pipe. |
| [ 2.324610] acpi_cpufreq: overriding BIOS provided _PSD data |
| [ 2.618851] 1 |
| [ 2.618879] 2 |
| [ 2.619219] 3 |
| [ 2.619220] 4 |
| [ 2.619221] 5 |
| [ 2.619222] 7 |
| [ 2.619223] 8 |
| [ 2.619224] 9 |
| [ 2.625119] 1 |
| [ 2.625155] 2 |
| [ 2.625633] 3 |
| [ 2.625635] 4 |
| [ 2.625635] 5 |
| [ 2.625636] 7 |
| [ 2.625647] 8 |
| [ 2.625648] 9 |
| [ 2.666201] snd_hda_codec_realtek hdaudioC1D0: ALC892: SKU not ready 0x00000100 |
| [ 2.666918] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line |
| [ 2.666922] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 2.666926] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| [ 2.666928] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 |
| [ 2.666931] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 |
| [ 2.666934] snd_hda_codec_realtek hdaudioC1D0: inputs: |
| [ 2.666938] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 |
| [ 2.666945] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 |
| [ 2.666948] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a |
| [ 2.666951] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c |
| [ 2.673519] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4 |
| [ 2.743458] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input5 |
| [ 2.743601] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6 |
| [ 2.743798] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input7 |
| [ 2.744258] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input8 |
| [ 2.744402] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input9 |
| [ 2.744694] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input10 |
| [ 2.744948] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input11 |
| [ 2.745072] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input12 |
| [ 2.995981] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.999445] ehci-pci: EHCI PCI platform driver |
| [ 3.000077] QUIRK: Enable AMD PLL fix |
| [ 3.000124] ehci-pci 0000:00:12.2: EHCI Host Controller |
| [ 3.000139] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| [ 3.000152] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 3.000236] ehci-pci 0000:00:12.2: debug port 1 |
| [ 3.000318] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014c000 |
| [ 3.006851] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| [ 3.007037] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 |
| [ 3.007041] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 3.007045] usb usb1: Product: EHCI Host Controller |
| [ 3.007048] usb usb1: Manufacturer: Linux 5.2.0-rc6-00138-g5ad9d0ebfc1e ehci_hcd |
| [ 3.007050] usb usb1: SerialNumber: 0000:00:12.2 |
| [ 3.007368] hub 1-0:1.0: USB hub found |
| [ 3.007392] hub 1-0:1.0: 5 ports detected |
| [ 3.007910] ehci-pci 0000:00:13.2: EHCI Host Controller |
| [ 3.007924] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 |
| [ 3.007934] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 3.008019] ehci-pci 0000:00:13.2: debug port 1 |
| [ 3.008085] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014d000 |
| [ 3.013847] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 3.014762] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| [ 3.014917] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 |
| [ 3.014921] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 3.014925] usb usb2: Product: EHCI Host Controller |
| [ 3.014928] usb usb2: Manufacturer: Linux 5.2.0-rc6-00138-g5ad9d0ebfc1e ehci_hcd |
| [ 3.014931] usb usb2: SerialNumber: 0000:00:13.2 |
| [ 3.015222] hub 2-0:1.0: USB hub found |
| [ 3.015246] hub 2-0:1.0: 5 ports detected |
| [ 3.017492] ohci-pci: OHCI PCI platform driver |
| [ 3.018101] ohci-pci 0000:00:12.0: OHCI PCI host controller |
| [ 3.018117] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 |
| [ 3.018203] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000 |
| [ 3.025300] ohci-pci 0000:00:13.0: OHCI PCI host controller |
| [ 3.025319] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4 |
| [ 3.025457] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000 |
| [ 3.026166] ohci-pci 0000:00:14.5: OHCI PCI host controller |
| [ 3.026189] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5 |
| [ 3.026331] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000 |
| [ 3.063288] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 |
| [ 3.063302] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection |
| [ 3.063614] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x8060 |
| [ 3.074044] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02 |
| [ 3.074051] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 3.074054] usb usb3: Product: OHCI PCI host controller |
| [ 3.074058] usb usb3: Manufacturer: Linux 5.2.0-rc6-00138-g5ad9d0ebfc1e ohci_hcd |
| [ 3.074060] usb usb3: SerialNumber: 0000:00:12.0 |
| [ 3.074365] hub 3-0:1.0: USB hub found |
| [ 3.074457] hub 3-0:1.0: 5 ports detected |
| [ 3.082011] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02 |
| [ 3.082017] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 3.082020] usb usb4: Product: OHCI PCI host controller |
| [ 3.082023] usb usb4: Manufacturer: Linux 5.2.0-rc6-00138-g5ad9d0ebfc1e ohci_hcd |
| [ 3.082026] usb usb4: SerialNumber: 0000:00:13.0 |
| [ 3.082319] hub 4-0:1.0: USB hub found |
| [ 3.082410] hub 4-0:1.0: 5 ports detected |
| [ 3.084846] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02 |
| [ 3.084853] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 3.084856] usb usb5: Product: OHCI PCI host controller |
| [ 3.084860] usb usb5: Manufacturer: Linux 5.2.0-rc6-00138-g5ad9d0ebfc1e ohci_hcd |
| [ 3.084862] usb usb5: SerialNumber: 0000:00:14.5 |
| [ 3.085209] hub 5-0:1.0: USB hub found |
| [ 3.085301] hub 5-0:1.0: 2 ports detected |
| [ 3.223256] libphy: r8169: probed |
| [ 3.224567] r8169 0000:03:00.0 eth0: RTL8168e/8111e, bc:5f:f4:c8:d3:98, XID 2c2, IRQ 28 |
| [ 3.224573] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| [ 3.491786] usb 3-2: new low-speed USB device number 2 using ohci-pci |
| [ 3.620215] random: crng init done |
| [ 3.620223] random: 7 urandom warning(s) missed due to ratelimiting |
| [ 3.659960] usb 3-2: New USB device found, idVendor=1241, idProduct=1122, bcdDevice= 1.00 |
| [ 3.659966] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.669679] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1241:1122.0001/input/input13 |
| [ 3.670291] hid-generic 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-2/input0 |
| [ 4.542855] r8169 0000:03:00.0 enp3s0: renamed from eth0 |
| [ 4.645419] RTL8211DN Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) |
| [ 4.859401] r8169 0000:03:00.0 enp3s0: Link is Down |
| [ 7.660531] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx |
| [ 7.660565] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready |