| |
| coreboot-4.11-116-gc32f631731-MrChromebox-4.11.1 Sun Dec 1 16:34:02 UTC 2019 bootblock starting (log level: 7)... |
| FMAP: Found "FLASH" version 1.1 at 0x600000. |
| FMAP: base = 0xff800000 size = 0x800000 #areas = 5 |
| FMAP: area COREBOOT found @ 600200 (2096640 bytes) |
| CBFS: 'COREBOOT Locator' located CBFS at [600200:800000) |
| CBFS: Locating 'fallback/romstage' |
| CBFS: Found @ offset 80 size 75a4 |
| Accumulated console time in bootblock 1 ms |
| |
| |
| coreboot-4.11-116-gc32f631731-MrChromebox-4.11.1 Sun Dec 1 16:34:02 UTC 2019 romstage starting (log level: 7)... |
| Disabling Watchdog reboot... done. |
| SMBus controller enabled. |
| SB: Resume from S3 detected. |
| Setting up static northbridge registers... done. |
| Initializing IGD... |
| Back from haswell_early_initialization() |
| Resume from S3 detected. |
| CPU id(40651) ucode:00000025 Intel(R) Celeron(R) 2955U @ 1.40GHz |
| AES NOT supported, TXT NOT supported, VT supported |
| PCH type: LP Mainstream, device id: 9c45, rev id 4 |
| SPD index 0 |
| FMAP: area COREBOOT found @ 600200 (2096640 bytes) |
| CBFS: 'COREBOOT Locator' located CBFS at [600200:800000) |
| CBFS: Locating 'spd.bin' |
| CBFS: Found @ offset fc0c0 size 800 |
| Starting UEFI PEI System Agent |
| FMAP: area RW_MRC_CACHE found @ 5b0000 (65536 bytes) |
| prepare_mrc_cache: at ffdb7fb0, size fd4 |
| FMAP: area COREBOOT found @ 600200 (2096640 bytes) |
| CBFS: Locating 'mrc.bin' |
| CBFS: Found @ offset 19fdc0 size 2e6e4 |
| System Agent: Starting up... |
| System Agent: S3 resume detected |
| System Agent: Initializing PCH |
| install_ppi: overwrite GUID {ed097352-9041-445a-80b6-b29d509e8845} |
| install_ppi: overwrite GUID {908c7f8b-5c48-47fb-8357-f5fd4e235276} |
| System Agent: Initializing PCH (SMBUS) |
| System Agent: Initializing PCH (USB) |
| System Agent: Initializing PCH (SA Init) |
| System Agent: Initializing PCH (Me UMA) |
| System Agent: Initializing Memory |
| Copy SPD for Channel 0 Dimm 0 |
| Copy SPD for Channel 1 Dimm 0 |
| System Agent: Done. |
| Sanity checking heap. |
| System Agent Version 1.6.1 Build 2 |
| memcfg DDR3 clock 1600 MHz |
| memcfg channel assignment: A: 0, B 1, C 2 |
| memcfg channel[0] config (00780008): |
| ECC inactive |
| enhanced interleave mode on |
| rank interleave on |
| DIMMA 2048 MB width x16 single rank, selected |
| DIMMB 0 MB width x16 single rank |
| memcfg channel[1] config (00780008): |
| ECC inactive |
| enhanced interleave mode on |
| rank interleave on |
| DIMMA 2048 MB width x16 single rank, selected |
| DIMMB 0 MB width x16 single rank |
| ME: FW Partition Table : OK |
| ME: Bringup Loader Failure : NO |
| ME: Firmware Init Complete : NO |
| ME: Manufacturing Mode : NO |
| ME: Boot Options Present : NO |
| ME: Update In Progress : NO |
| ME: Current Working State : Normal |
| ME: Current Operation State : Bring up |
| ME: Current Operation Mode : Normal |
| ME: Error Code : No Error |
| ME: Progress Phase : BUP Phase |
| ME: Power Management Event : Clean Moff->Mx wake |
| ME: Progress Phase State : 0x2e |
| SMM Memory Map |
| SMRAM : 0x7f800000 0x800000 |
| Subregion 0: 0x7f800000 0x300000 |
| Subregion 1: 0x7fb00000 0x100000 |
| Subregion 2: 0x7fc00000 0x400000 |
| MTRR Range: Start=7f000000 End=80000000 (Size 1000000) |
| MTRR Range: Start=ff800000 End=0 (Size 800000) |
| Accumulated console time in romstage 2 ms |
| |
| |
| coreboot-4.11-116-gc32f631731-MrChromebox-4.11.1 Sun Dec 1 16:34:02 UTC 2019 postcar starting (log level: 7)... |
| Jumping to image. |
| |
| |
| coreboot-4.11-116-gc32f631731-MrChromebox-4.11.1 Sun Dec 1 16:34:02 UTC 2019 ramstage starting (log level: 7)... |
| S3 Resume. |
| BS: BS_PRE_DEVICE times (ms): entry 0 run 0 exit 0 |
| BS: BS_DEV_INIT_CHIPS times (ms): entry 0 run 0 exit 0 |
| Enumerating buses... |
| CPU_CLUSTER: 0 enabled |
| DOMAIN: 0000 enabled |
| PCI: pci_scan_bus for bus 00 |
| PCI: 00:00.0 [8086/0a04] enabled |
| PCI: 00:02.0 [8086/0a06] enabled |
| PCI: 00:03.0 [8086/0a0c] enabled |
| PCI: 00:04.0 [8086/0a03] enabled |
| PCI: 00:13.0: Disabling device |
| PCI: 00:13.0 [8086/9c36] disabled No operations |
| PCI: 00:14.0 [8086/9c31] enabled |
| PCI: 00:15.0 [8086/9c60] enabled |
| PCI: 00:15.1 [8086/9c61] enabled |
| PCI: 00:15.2 [8086/9c62] enabled |
| PCI: 00:15.3: Disabling device |
| IOBP: set 0xce00aac7 to 0x00000100 |
| PCI: 00:15.4: Disabling device |
| IOBP: set 0xce00ab07 to 0x00000100 |
| PCI: 00:15.5: Disabling device |
| IOBP: set 0xce00ab47 to 0x00000100 |
| PCI: 00:15.6: Disabling device |
| IOBP: set 0xce00ab87 to 0x00000100 |
| PCI: 00:16.0 [8086/9c3a] enabled |
| PCI: 00:16.1: Disabling device |
| PCI: 00:16.1 [8086/9c3b] disabled No operations |
| PCI: 00:16.2: Disabling device |
| PCI: 00:16.3: Disabling device |
| PCI: 00:17.0: Disabling device |
| IOBP: set 0xce00ae07 to 0x00000100 |
| PCI: 00:19.0: Disabling device |
| PCI: 00:1b.0 [8086/9c20] enabled |
| PCIe Root Port 1 ASPM is enabled |
| IOBP: set 0xe9002440 to 0x05050e00 |
| PCI: 00:1c.0 [8086/9c10] enabled |
| PCI: 00:1c.1 [8086/9c12] disabled |
| PCI: 00:1c.2 [8086/9c14] disabled |
| PCI: 00:1c.3 [8086/9c16] disabled |
| PCI: 00:1c.4 [8086/9c18] disabled |
| PCI: 00:1c.1: Disabling device |
| PCI: 00:1c.2: Disabling device |
| PCI: 00:1c.3: Disabling device |
| PCI: 00:1c.4: Disabling device |
| PCI: 00:1c.5: Disabling device |
| PCI: 00:1c.5 [8086/9c1a] disabled |
| PCI: Static device PCI: 00:1d.0 not found, disabling it. |
| PCI: 00:1e.0: Disabling device |
| PCI: 00:1f.0 [8086/9c45] enabled |
| PCI: 00:1f.2 [8086/9c03] enabled |
| PCI: 00:1f.3 [8086/9c22] enabled |
| PCI: 00:1f.6 [8086/9c24] enabled |
| PCI: Leftover static devices: |
| PCI: 00:15.3 |
| PCI: 00:15.4 |
| PCI: 00:15.5 |
| PCI: 00:15.6 |
| PCI: 00:16.2 |
| PCI: 00:16.3 |
| PCI: 00:17.0 |
| PCI: 00:19.0 |
| PCI: 00:1d.0 |
| PCI: 00:1e.0 |
| PCI: Check your devicetree.cb. |
| PCI: pci_scan_bus for bus 01 |
| PCI: 01:00.0 [168c/0034] enabled |
| Enabling Common Clock Configuration |
| ASPM: Enabled L0s and L1 |
| Failed to enable LTR for dev = PCI: 01:00.0 |
| scan_bus: scanning of bus PCI: 00:1c.0 took 178 usecs |
| PNP: 0c31.0 enabled |
| PNP: 00ff.1 enabled |
| PNP: 00ff.0 enabled |
| scan_bus: scanning of bus PCI: 00:1f.0 took 9 usecs |
| scan_bus: scanning of bus PCI: 00:1f.3 took 2 usecs |
| scan_bus: scanning of bus DOMAIN: 0000 took 937 usecs |
| scan_bus: scanning of bus Root Device took 944 usecs |
| done |
| FMAP: area RW_MRC_CACHE found @ 5b0000 (65536 bytes) |
| MRC: Checking cached data update for 'RW_MRC_CACHE'. |
| Manufacturer: ef |
| SF: Detected W25Q64_V with sector size 0x1000, total 0x800000 |
| BS: BS_DEV_ENUMERATE times (ms): entry 0 run 1 exit 2 |
| found VGA at PCI: 00:02.0 |
| Setting up VGA for PCI: 00:02.0 |
| Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000 |
| Setting PCI_BRIDGE_CTL_VGA for bridge Root Device |
| Allocating resources... |
| Reading resources... |
| mc_add_fixed_mmio_resources: Adding PCIEXBAR @ 60 0xf0000000-0xf3ffffff. |
| mc_add_fixed_mmio_resources: Adding MCHBAR @ 48 0xfed10000-0xfed17fff. |
| mc_add_fixed_mmio_resources: Adding DMIBAR @ 68 0xfed18000-0xfed18fff. |
| mc_add_fixed_mmio_resources: Adding EPBAR @ 40 0xfed19000-0xfed19fff. |
| mc_add_fixed_mmio_resources: Adding GDXCBAR @ 5420 0xfed84000-0xfed84fff. |
| MC MAP: TOM: 0x100000000 |
| MC MAP: TOUUD: 0x178e00000 |
| MC MAP: MESEG_BASE: 0xff000000 |
| MC MAP: MESEG_LIMIT: 0x7fff0fffff |
| MC MAP: REMAP_BASE: 0x100000000 |
| MC MAP: REMAP_LIMIT: 0x178dfffff |
| MC MAP: TOLUD: 0x86200000 |
| MC MAP: BGSM: 0x80000000 |
| MC MAP: BDSM: 0x80200000 |
| MC MAP: TESGMB: 0x7f800000 |
| MC MAP: GGC: 0x219 |
| PNP: 00ff.1 missing read_resources |
| Done reading resources. |
| Setting resources... |
| PCI: 00:02.0 10 <- [0x00e0000000 - 0x00e03fffff] size 0x00400000 gran 0x16 mem64 |
| PCI: 00:02.0 18 <- [0x00d0000000 - 0x00dfffffff] size 0x10000000 gran 0x1c prefmem64 |
| PCI: 00:02.0 20 <- [0x0000001800 - 0x000000183f] size 0x00000040 gran 0x06 io |
| PCI: 00:03.0 10 <- [0x00e0518000 - 0x00e051bfff] size 0x00004000 gran 0x0e mem64 |
| PCI: 00:04.0 10 <- [0x00e0510000 - 0x00e0517fff] size 0x00008000 gran 0x0f mem64 |
| PCI: 00:14.0 10 <- [0x00e0500000 - 0x00e050ffff] size 0x00010000 gran 0x10 mem64 |
| PCI: 00:15.0 10 <- [0x00e0520000 - 0x00e0520fff] size 0x00001000 gran 0x0c mem |
| PCI: 00:15.0 14 <- [0x00e0521000 - 0x00e0521fff] size 0x00001000 gran 0x0c mem |
| PCI: 00:15.1 10 <- [0x00e0522000 - 0x00e0522fff] size 0x00001000 gran 0x0c mem |
| PCI: 00:15.1 14 <- [0x00e0523000 - 0x00e0523fff] size 0x00001000 gran 0x0c mem |
| PCI: 00:15.2 10 <- [0x00e0524000 - 0x00e0524fff] size 0x00001000 gran 0x0c mem |
| PCI: 00:15.2 14 <- [0x00e0525000 - 0x00e0525fff] size 0x00001000 gran 0x0c mem |
| PCI: 00:16.0 10 <- [0x00e0529000 - 0x00e052901f] size 0x00000020 gran 0x05 mem64 |
| PCI: 00:1b.0 10 <- [0x00e051c000 - 0x00e051ffff] size 0x00004000 gran 0x0e mem64 |
| PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io |
| PCI: 00:1c.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 prefmem |
| PCI: 00:1c.0 20 <- [0x00e0400000 - 0x00e04fffff] size 0x00100000 gran 0x14 bus 01 mem |
| PCI: 01:00.0 10 <- [0x00e0400000 - 0x00e047ffff] size 0x00080000 gran 0x13 mem64 |
| PCI: 01:00.0 30 <- [0x00e0480000 - 0x00e048ffff] size 0x00010000 gran 0x10 romem |
| PCI: 00:1f.2 10 <- [0x0000001860 - 0x0000001867] size 0x00000008 gran 0x03 io |
| PCI: 00:1f.2 14 <- [0x0000001870 - 0x0000001873] size 0x00000004 gran 0x02 io |
| PCI: 00:1f.2 18 <- [0x0000001868 - 0x000000186f] size 0x00000008 gran 0x03 io |
| PCI: 00:1f.2 1c <- [0x0000001874 - 0x0000001877] size 0x00000004 gran 0x02 io |
| PCI: 00:1f.2 20 <- [0x0000001840 - 0x000000185f] size 0x00000020 gran 0x05 io |
| PCI: 00:1f.2 24 <- [0x00e0527000 - 0x00e05277ff] size 0x00000800 gran 0x0b mem |
| PCI: 00:1f.3 10 <- [0x00e0528000 - 0x00e05280ff] size 0x00000100 gran 0x08 mem64 |
| PCI: 00:1f.6 10 <- [0x00e0526000 - 0x00e0526fff] size 0x00001000 gran 0x0c mem64 |
| Done setting resources. |
| Done allocating resources. |
| BS: BS_DEV_RESOURCES times (ms): entry 0 run 1 exit 0 |
| Enabling resources... |
| PCI: 00:00.0 subsystem <- 8086/0a04 |
| PCI: 00:00.0 cmd <- 06 |
| PCI: 00:02.0 subsystem <- 8086/0a06 |
| PCI: 00:02.0 cmd <- 03 |
| PCI: 00:03.0 subsystem <- 8086/0a0c |
| PCI: 00:03.0 cmd <- 02 |
| PCI: 00:04.0 cmd <- 02 |
| PCI: 00:14.0 subsystem <- 8086/9c31 |
| PCI: 00:14.0 cmd <- 102 |
| PCI: 00:15.0 subsystem <- 8086/9c60 |
| PCI: 00:15.0 cmd <- 106 |
| PCI: 00:15.1 subsystem <- 8086/9c61 |
| PCI: 00:15.1 cmd <- 102 |
| PCI: 00:15.2 subsystem <- 8086/9c62 |
| PCI: 00:15.2 cmd <- 102 |
| PCI: 00:16.0 subsystem <- 8086/9c3a |
| PCI: 00:16.0 cmd <- 02 |
| PCI: 00:1b.0 subsystem <- 8086/9c20 |
| PCI: 00:1b.0 cmd <- 102 |
| PCI: 00:1c.0 bridge ctrl <- 0013 |
| PCI: 00:1c.0 subsystem <- 8086/9c10 |
| PCI: 00:1c.0 cmd <- 06 |
| PCI: 00:1f.0 subsystem <- 8086/9c45 |
| PCI: 00:1f.0 cmd <- 107 |
| PCI: 00:1f.2 subsystem <- 8086/9c03 |
| PCI: 00:1f.2 cmd <- 103 |
| PCI: 00:1f.3 subsystem <- 8086/9c22 |
| PCI: 00:1f.3 cmd <- 103 |
| PCI: 00:1f.6 subsystem <- 8086/9c24 |
| PCI: 00:1f.6 cmd <- 102 |
| PCI: 01:00.0 cmd <- 02 |
| done. |
| BS: BS_DEV_ENABLE times (ms): entry 0 run 0 exit 0 |
| Found TPM SLB9635 TT 1.2 by Infineon |
| TPM: Handle S3 resume. |
| TPM: Resume |
| TPM: command 0x99 returned 0x0 |
| TPM: setup succeeded |
| Initializing devices... |
| Root Device init ... |
| mainboard_ec_init |
| Chrome EC: Set SMI mask to 0x0000000000000000 |
| EC returned error result code 1 |
| Chrome EC: UHEPI not supported |
| Chrome EC: Set SCI mask to 0x00000000000009fb |
| Chrome EC: Set WAKE mask to 0x0000000000000000 |
| Root Device init finished in 3999 usecs |
| CPU_CLUSTER: 0 init ... |
| MTRR: Physical address space: |
| 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 |
| 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 |
| 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 |
| 0x0000000080000000 - 0x00000000d0000000 size 0x50000000 type 0 |
| 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 |
| 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 |
| 0x0000000100000000 - 0x0000000178e00000 size 0x78e00000 type 6 |
| MTRR: Fixed MSR 0x250 0x0606060606060606 |
| MTRR: Fixed MSR 0x258 0x0606060606060606 |
| MTRR: Fixed MSR 0x259 0x0000000000000000 |
| MTRR: Fixed MSR 0x268 0x0606060606060606 |
| MTRR: Fixed MSR 0x269 0x0606060606060606 |
| MTRR: Fixed MSR 0x26a 0x0606060606060606 |
| MTRR: Fixed MSR 0x26b 0x0606060606060606 |
| MTRR: Fixed MSR 0x26c 0x0606060606060606 |
| MTRR: Fixed MSR 0x26d 0x0606060606060606 |
| MTRR: Fixed MSR 0x26e 0x0606060606060606 |
| MTRR: Fixed MSR 0x26f 0x0606060606060606 |
| CPU physical address size: 39 bits |
| MTRR: default type WB/UC MTRR counts: 4/3. |
| MTRR: UC selected as default type. |
| MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 |
| MTRR: 1 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1 |
| MTRR: 2 base 0x0000000100000000 mask 0x0000007f80000000 type 6 |
| |
| MTRR check |
| Fixed MTRRs : Enabled |
| Variable MTRRs: Enabled |
| |
| Initializing VR config. |
| PCODE: 24MHz BLCK calibration response: 0 |
| PCODE: 24MHz BLCK calibration value: 0x85000000 |
| PCH Power: PCODE Levels 0x3f1c50c2 0x004cd2c9 |
| CPU has 2 cores, 2 threads enabled. |
| Setting up SMI for CPU |
| Will perform SMM setup. |
| FMAP: area COREBOOT found @ 600200 (2096640 bytes) |
| CBFS: 'COREBOOT Locator' located CBFS at [600200:800000) |
| CBFS: Locating 'cpu_microcode_blob.bin' |
| CBFS: Found @ offset 76c0 size 5400 |
| microcode: sig=0x40651 pf=0x40 revision=0x25 |
| CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz. |
| Loading module at 00030000 with entry 00030000. filesize: 0x170 memsize: 0x170 |
| Processing 16 relocs. Offset value of 0x00030000 |
| Attempting to start 1 APs |
| Waiting for 10ms after sending INIT. |
| Waiting for 1st SIPI to complete...done. |
| Waiting for 2nd SIPI to complete...done. |
| AP: slot 1 apic_id 2. |
| Loading module at 00038000 with entry 00038000. filesize: 0x1a8 memsize: 0x1a8 |
| Processing 13 relocs. Offset value of 0x00038000 |
| SMM Module: stub loaded at 00038000. Will call 7f7a0069(00000000) |
| Installing SMM handler to 0x7f800000 |
| Loading module at 7f810000 with entry 7f8109aa. filesize: 0x5e50 memsize: 0x9f38 |
| Processing 440 relocs. Offset value of 0x7f810000 |
| Loading module at 7f808000 with entry 7f808000. filesize: 0x1a8 memsize: 0x1a8 |
| Processing 13 relocs. Offset value of 0x7f808000 |
| SMM Module: placing jmp sequence at 7f807c00 rel16 0x03fd |
| SMM Module: stub loaded at 7f808000. Will call 7f8109aa(00000000) |
| Initializing Southbridge SMI... |
| SMI_STS: PM1 |
| WAK PCIEXPWAK New SMBASE 0x7f800000 |
| In relocation handler: cpu 0 |
| New SMBASE=0x7f800000 IEDBASE=0x7fc00000 |
| Writing SMRR. base = 0x7f800006, mask=0xff800800 |
| Relocation complete. |
| microcode: Update skipped, already up-to-date |
| New SMBASE 0x7f7ffc00 |
| In relocation handler: cpu 1 |
| New SMBASE=0x7f7ffc00 IEDBASE=0x7fc00000 |
| Writing SMRR. base = 0x7f800006, mask=0xff800800 |
| Relocation complete. |
| microcode: Update skipped, already up-to-date |
| Initializing CPU #0 |
| CPU: vendor Intel device 40651 |
| CPU: family 06, model 45, stepping 01 |
| Setting up local APIC... |
| apic_id: 0x00 done. |
| VMX status: enabled |
| IA32_FEATURE_CONTROL status: locked |
| haswell: energy policy set to 6 |
| haswell: frequency set to 1400 |
| Turbo is unavailable |
| CPU #0 initialized |
| Initializing CPU #1 |
| CPU: vendor Intel device 40651 |
| CPU: family 06, model 45, stepping 01 |
| Setting up local APIC... |
| apic_id: 0x02 done. |
| VMX status: enabled |
| IA32_FEATURE_CONTROL status: locked |
| haswell: energy policy set to 6 |
| haswell: frequency set to 1400 |
| CPU #1 initialized |
| bsp_do_flight_plan done after 1 msecs. |
| Enabling SMIs. |
| Locking SMM. |
| CPU_CLUSTER: 0 init finished in 14194 usecs |
| PCI: 00:00.0 init ... |
| Disabling PEG12. |
| Disabling PEG11. |
| Disabling PEG10. |
| Disabling "device 7". |
| Set BIOS_RESET_CPL |
| CPU TDP: 15 Watts |
| PCI: 00:00.0 init finished in 1012 usecs |
| PCI: 00:02.0 init ... |
| GT Power Management Init |
| GT Power Management Init (post VBIOS) |
| PCI: 00:02.0 init finished in 132 usecs |
| PCI: 00:03.0 init ... |
| Mini-HD: base = e0518000 |
| HDA: Initializing codec #0 |
| HDA: codec viddid: 80862807 |
| HDA: verb loaded. |
| PCI: 00:03.0 init finished in 1355 usecs |
| PCI: 00:04.0 init ... |
| PCI: 00:04.0 init finished in 0 usecs |
| PCI: 00:14.0 init ... |
| IOBP: set 0xe5004001 to 0x000000ce |
| PCI: 00:14.0 init finished in 1049 usecs |
| PCI: 00:15.0 init ... |
| Initializing Serial IO device |
| IOBP: set 0xcb000154 to 0x0000131f |
| IOBP: set 0xcb000180 to 0x0000003f |
| IOBP: set 0xcb000240 to 0x0034000a |
| PCI: 00:15.0 init finished in 89 usecs |
| PCI: 00:15.1 init ... |
| Initializing Serial IO device |
| IOBP: set 0xcb000248 to 0x0034000e |
| PCI: 00:15.1 init finished in 35 usecs |
| PCI: 00:15.2 init ... |
| Initializing Serial IO device |
| IOBP: set 0xcb000250 to 0x0034000e |
| PCI: 00:15.2 init finished in 35 usecs |
| PCI: 00:16.0 init ... |
| ME: FW Partition Table : OK |
| ME: Bringup Loader Failure : NO |
| ME: Firmware Init Complete : NO |
| ME: Manufacturing Mode : NO |
| ME: Boot Options Present : NO |
| ME: Update In Progress : NO |
| ME: Current Working State : Normal |
| ME: Current Operation State : M0 with UMA |
| ME: Current Operation Mode : Normal |
| ME: Error Code : No Error |
| ME: Progress Phase : Policy Module |
| ME: Power Management Event : Clean Moff->Mx wake |
| ME: Progress Phase State : Entery into Policy Module |
| intel_me_path: mbp is not ready! |
| ME: BIOS path: Error |
| ME: MBP not ready |
| PCI: 00:16.0 init finished in 15 usecs |
| PCI: 00:1b.0 init ... |
| Azalia: base = e051c000 |
| Azalia: codec_mask = 01 |
| HDA: Initializing codec #0 |
| HDA: codec viddid: 10ec0283 |
| HDA: verb loaded. |
| PCI: 00:1b.0 init finished in 3636 usecs |
| PCI: 00:1c.0 init ... |
| Initializing PCH PCIe bridge. |
| PCI: 00:1c.0 init finished in 7 usecs |
| PCI: 00:1f.0 init ... |
| pch: lpc_init |
| IOAPIC: Initializing IOAPIC at 0xfec00000 |
| IOAPIC: Bootstrap Processor Local APIC = 0x00 |
| IOAPIC: ID = 0x02 |
| Set power off after power failure. |
| NMI sources disabled. |
| LynxPoint LP PM init |
| IOBP: set 0xed00015c to 0x1bc33700 |
| IOBP: set 0xed000118 to 0x00c00000 |
| IOBP: set 0xed000120 to 0x00245560 |
| IOBP: set 0xca000000 to 0x00000009 |
| IOBP: set 0xcf000000 to 0x00007007 |
| IOBP: set 0xce00c000 to 0x00000000 |
| RTC: failed = 0x0 |
| PCI: 00:1f.0 init finished in 1268 usecs |
| PCI: 00:1f.2 init ... |
| SATA: Initializing... |
| SATA: Controller in AHCI mode. |
| ABAR: e0527000 |
| PCI: 00:1f.2 init finished in 24 usecs |
| PCI: 00:1f.3 init ... |
| PCI: 00:1f.3 init finished in 5 usecs |
| PCI: 00:1f.6 init ... |
| PCI: 00:1f.6 init finished in 0 usecs |
| PCI: 01:00.0 init ... |
| PCI: 01:00.0 init finished in 0 usecs |
| PNP: 00ff.0 init ... |
| Google Chrome EC: Initializing |
| Google Chrome EC: version: |
| ro: falco_v1.5.112-8fedda8 |
| rw: falco_v1.5.142-9c22831 |
| running image: 2 |
| Google Chrome EC: version: |
| ro: falco_v1.5.112-8fedda8 |
| rw: falco_v1.5.142-9c22831 |
| running image: 2 |
| EC returned error result code 1 |
| PNP: 00ff.0 init finished in 4677 usecs |
| Devices initialized |
| BS: BS_DEV_INIT times (ms): entry 8 run 31 exit 0 |
| Finalize devices... |
| PCI: 00:1f.0 final |
| Devices finalized |
| BS: BS_POST_DEVICE times (ms): entry 0 run 1159 exit 0 |
| Trying to find the wakeup vector... |
| Looking on 000f0000 for valid checksum |
| Checksum 1 passed |
| Checksum 2 passed all OK |
| RSDP found at 000f0000 |
| RSDT found at 7f74a030 ends at 7f74a070 |
| FADT found at 7f74e560 |
| FACS found at 7f74a240 |
| OS waking vector is 0009a1d0 |
| BS: BS_OS_RESUME_CHECK times (ms): entry 0 run 0 exit 0 |
| Restore GNVS pointer to 7f786000 |
| |