blob: 37b3372d65a56593ccb09850ebd6a13432331b1d [file] [log] [blame]
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #16 r323084M: Fri Sep 1 12:00:14 CEST 2017
root@6L250S0:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 5.0.0 (branches/release_50 311606) (based on LLVM 5.0.0svn)
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): resolution 640x480
CPU: AMD A8-5500 APU with Radeon(tm) HD Graphics (3194.25-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x610f01 Family=0x15 Model=0x10 Stepping=1
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
Structured Extended Features=0x8<BMI1>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
TSC: P-state invariant, performance statistics
real memory = 9110028288 (8688 MB)
avail memory = 7697235968 (7340 MB)
Event timer "LAPIC" quality 100
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23 on motherboard
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1597124484 Hz quality 1000
random: entropy device external interface
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff80f6d6a0, 0) error 19
kbd1 at kbdmux0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <CORE COREBOOT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x818-0x81b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xe0000000-0xefffffff,0xf0180000-0xf01bffff at device 1.0 on pci0
vgapci0: Boot video device
hdac0: <ATI (0x9902) HDA Controller> mem 0xf01c0000-0xf01c3fff at device 1.1 on pci0
hdac0: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac0 attach returned 6
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf01c8000-0xf01c9fff at device 16.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Unable to map MSI-X table
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xf01ca000-0xf01cbfff at device 16.1 on pci0
xhci1: 32 bytes context size, 64-bit DMA
xhci1: Unable to map MSI-X table
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD Hudson-2 AHCI SATA controller> port 0x2410-0x2417,0x2420-0x2423,0x2418-0x241f,0x2424-0x2427,0x2400-0x240f mem 0xf01cf000-0xf01cf7ff at device 17.0 on pci0
ahci0: AHCI v1.30 with 8 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich6: <AHCI channel> at channel 6 on ahci0
ahcich7: <AHCI channel> at channel 7 on ahci0
ohci0: <AMD FCH USB Controller> mem 0xf01cc000-0xf01ccfff at device 18.0 on pci0
usbus2 on ohci0
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <AMD FCH USB 2.0 controller> mem 0xf01d0000-0xf01d00ff at device 18.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
ohci1: <AMD FCH USB Controller> mem 0xf01cd000-0xf01cdfff at device 19.0 on pci0
usbus4 on ohci1
usbus4: 12Mbps Full Speed USB v1.0
ehci1: <AMD FCH USB 2.0 controller> mem 0xf01d1000-0xf01d10ff at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
usbus5: 480Mbps High Speed USB v2.0
hdac0: <AMD Hudson-2 HDA Controller> mem 0xf01c4000-0xf01c7fff at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci1: <ACPI PCI bus> on pcib1
ohci2: <OHCI (generic) USB controller> mem 0xf01ce000-0xf01cefff at device 20.5 on pci0
usbus6 on ohci2
usbus6: 12Mbps Full Speed USB v1.0
pcib2: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pcib3: failed to allocate initial I/O port window: 0x1000-0x1fff
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x48000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: <snip>
re0: netmap queues/slots: TX 1/256, RX 1/256
orm0: <ISA Option ROM> at iomem 0xee800-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: console (115200,n,8,1)
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC887 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa0
pcm3: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa0
ugen1.1: <0x1022 XHCI root HUB> at usbus1
ugen4.1: <AMD OHCI root HUB> at usbus4
ugen0.1: <0x1022 XHCI root HUB> at usbus0
ugen6.1: <AMD OHCI root HUB> at usbus6
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen3.1: <AMD EHCI root HUB> at usbus3
uhub1: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen5.1: <AMD EHCI root HUB> at usbus5
uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub5: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen2.1: <AMD OHCI root HUB> at usbus2
uhub6: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ada0 at ahcich3 bus 0 scbus3 target 0 lun 0
ada0: <Maxtor 6L250S0 BANC1E00> ATA-7 SATA 1.x device
ada0: Serial Number L5945QVH
ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 239372MB (490234752 512 byte sectors)
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:Maxtor_6L250S0/ROOT/default []...
Root mount waiting for: usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
uhub4: 2 ports with 2 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub6: 5 ports with 5 removable, self powered
uhub2: 4 ports with 4 removable, self powered
uhub0: 4 ports with 4 removable, self powered
ugen1.2: <Realtek 802.11n NIC> at usbus1
rtwn0 on uhub0
rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 1> on usbus1
rtwn0: MAC/BB RTL8188EU, RF 6052 1T1R
Root mount waiting for: usbus5 usbus3
uhub3: 5 ports with 5 removable, self powered
uhub5: 5 ports with 5 removable, self powered
wlan1: Ethernet address: <snip>
re0: link state changed to DOWN
wlan1: link state changed to UP