| [ 0.000000] Linux version 5.6.0-rc7-00001-gdd1d826a5b30 (martin@laptop) (gcc version 8.3.0 (Debian 8.3.0-6)) #88 SMP Mon Mar 23 20:25:24 CET 2020 |
| [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.6.0-rc7-00001-gdd1d826a5b30 root=UUID=5e6b38be-bc16-475b-8de3-1e5acbc60d52 ro iomem=relaxed |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff21fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff22000-0x00000000c29fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043d5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: LENOVO 232566G/232566G, BIOS CBET4000 4.11-1765-g4bd6927388-dirty 03/24/2020 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2893.294 MHz processor |
| [ 0.001006] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.001008] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.001011] last_pfn = 0x43d600 max_arch_pfn = 0x400000000 |
| [ 0.001015] MTRR default type: write-back |
| [ 0.001016] MTRR fixed ranges enabled: |
| [ 0.001017] 00000-9FFFF write-back |
| [ 0.001018] A0000-BFFFF uncachable |
| [ 0.001018] C0000-FFFFF write-back |
| [ 0.001019] MTRR variable ranges enabled: |
| [ 0.001020] 0 base 0C0000000 mask FF0000000 uncachable |
| [ 0.001021] 1 base 0D0000000 mask FF0000000 write-combining |
| [ 0.001022] 2 base 0E0000000 mask FE0000000 uncachable |
| [ 0.001022] 3 disabled |
| [ 0.001023] 4 disabled |
| [ 0.001023] 5 disabled |
| [ 0.001023] 6 disabled |
| [ 0.001024] 7 disabled |
| [ 0.001024] 8 disabled |
| [ 0.001024] 9 disabled |
| [ 0.001298] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.001667] last_pfn = 0xbff22 max_arch_pfn = 0x400000000 |
| [ 0.011004] BRK [0x11b401000, 0x11b401fff] PGTABLE |
| [ 0.011006] BRK [0x11b402000, 0x11b402fff] PGTABLE |
| [ 0.011007] BRK [0x11b403000, 0x11b403fff] PGTABLE |
| [ 0.011034] BRK [0x11b404000, 0x11b404fff] PGTABLE |
| [ 0.011035] BRK [0x11b405000, 0x11b405fff] PGTABLE |
| [ 0.011120] BRK [0x11b406000, 0x11b406fff] PGTABLE |
| [ 0.011132] BRK [0x11b407000, 0x11b407fff] PGTABLE |
| [ 0.011154] BRK [0x11b408000, 0x11b408fff] PGTABLE |
| [ 0.011327] RAMDISK: [mem 0x339dd000-0x35ce5fff] |
| [ 0.011331] ACPI: Early table checksum verification disabled |
| [ 0.011334] ACPI: RSDP 0x00000000000F6750 000024 (v02 COREv4) |
| [ 0.011337] ACPI: XSDT 0x00000000BFF460E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.011342] ACPI: FACP 0x00000000BFF49D50 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.011347] ACPI: DSDT 0x00000000BFF46280 003AC1 (v02 COREv4 COREBOOT 20110725 INTL 20190703) |
| [ 0.011349] ACPI: FACS 0x00000000BFF46240 000040 |
| [ 0.011352] ACPI: FACS 0x00000000BFF46240 000040 |
| [ 0.011354] ACPI: SSDT 0x00000000BFF49E50 001A8F (v02 COREv4 COREBOOT 0000002A CORE 20190703) |
| [ 0.011357] ACPI: MCFG 0x00000000BFF4B8E0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.011359] ACPI: TCPA 0x00000000BFF4B920 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.011362] ACPI: APIC 0x00000000BFF4B960 00006C (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.011364] ACPI: DMAR 0x00000000BFF4B9D0 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.011367] ACPI: HPET 0x00000000BFF4DAA0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.011374] ACPI: Local APIC address 0xfee00000 |
| [ 0.011448] No NUMA configuration found |
| [ 0.011449] Faking a node at [mem 0x0000000000000000-0x000000043d5fffff] |
| [ 0.011453] NODE_DATA(0) allocated [mem 0x43d5ef000-0x43d5f3fff] |
| [ 0.011482] Zone ranges: |
| [ 0.011483] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.011485] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.011486] Normal [mem 0x0000000100000000-0x000000043d5fffff] |
| [ 0.011487] Device empty |
| [ 0.011488] Movable zone start for each node |
| [ 0.011488] Early memory node ranges |
| [ 0.011489] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.011491] node 0: [mem 0x0000000000100000-0x00000000bff21fff] |
| [ 0.011492] node 0: [mem 0x0000000100000000-0x000000043d5fffff] |
| [ 0.011590] Zeroed struct page in unavailable ranges: 11072 pages |
| [ 0.011591] Initmem setup node 0 [mem 0x0000000000001000-0x000000043d5fffff] |
| [ 0.011593] On node 0 totalpages: 4183232 |
| [ 0.011594] DMA zone: 64 pages used for memmap |
| [ 0.011594] DMA zone: 21 pages reserved |
| [ 0.011595] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.011646] DMA32 zone: 12221 pages used for memmap |
| [ 0.011647] DMA32 zone: 782114 pages, LIFO batch:63 |
| [ 0.020860] Normal zone: 53080 pages used for memmap |
| [ 0.020862] Normal zone: 3397120 pages, LIFO batch:63 |
| [ 0.060763] Reserving Intel graphics memory at [mem 0xc0a00000-0xc29fffff] |
| [ 0.060959] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.060961] ACPI: Local APIC address 0xfee00000 |
| [ 0.060977] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.060979] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.060981] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.060982] ACPI: IRQ0 used by override. |
| [ 0.060983] ACPI: IRQ9 used by override. |
| [ 0.060985] Using ACPI (MADT) for SMP configuration information |
| [ 0.060986] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.060991] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.061001] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.061002] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.061003] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.061004] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.061005] PM: hibernation: Registered nosave memory: [mem 0xbff22000-0xc29fffff] |
| [ 0.061006] PM: hibernation: Registered nosave memory: [mem 0xc2a00000-0xefffffff] |
| [ 0.061007] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.061007] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] |
| [ 0.061008] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.061009] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.061010] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.061010] PM: hibernation: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.061012] [mem 0xc2a00000-0xefffffff] available for PCI devices |
| [ 0.061013] Booting paravirtualized kernel on bare hardware |
| [ 0.061016] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.064534] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.064714] percpu: Embedded 55 pages/cpu s187864 r8192 d29224 u524288 |
| [ 0.064719] pcpu-alloc: s187864 r8192 d29224 u524288 alloc=1*2097152 |
| [ 0.064720] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.064737] Built 1 zonelists, mobility grouping on. Total pages: 4117846 |
| [ 0.064739] Policy zone: Normal |
| [ 0.064740] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.6.0-rc7-00001-gdd1d826a5b30 root=UUID=5e6b38be-bc16-475b-8de3-1e5acbc60d52 ro iomem=relaxed |
| [ 0.065616] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) |
| [ 0.066061] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) |
| [ 0.066112] mem auto-init: stack:off, heap alloc:off, heap free:off |
| [ 0.111812] Memory: 16318680K/16732928K available (10243K kernel code, 1254K rwdata, 3804K rodata, 1612K init, 2088K bss, 414248K reserved, 0K cma-reserved) |
| [ 0.111882] Kernel/User page tables isolation: enabled |
| [ 0.111897] ftrace: allocating 33644 entries in 132 pages |
| [ 0.122690] ftrace: allocated 132 pages with 2 groups |
| [ 0.122767] rcu: Hierarchical RCU implementation. |
| [ 0.122769] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.122770] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. |
| [ 0.122771] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.125567] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.125780] random: get_random_bytes called from start_kernel+0x5ad/0x791 with crng_init=0 |
| [ 0.126204] Console: colour dummy device 80x25 |
| [ 0.126321] printk: console [tty0] enabled |
| [ 0.126337] ACPI: Core revision 20200110 |
| [ 0.126406] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.126423] APIC: Switch to symmetric I/O mode setup |
| [ 0.126425] DMAR: Host address width 36 |
| [ 0.126427] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.126432] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.126435] DMAR: RMRR base: 0x000000c0800000 end: 0x000000c29fffff |
| [ 0.126437] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.126441] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.126444] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.126445] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.126447] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.126881] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.126884] x2apic enabled |
| [ 0.126891] Switched APIC routing to cluster x2apic. |
| [ 0.127329] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.146424] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b483f0c36, max_idle_ns: 440795226749 ns |
| [ 0.146430] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.58 BogoMIPS (lpj=11573176) |
| [ 0.146434] pid_max: default: 32768 minimum: 301 |
| [ 0.146476] LSM: Security Framework initializing |
| [ 0.146488] Yama: becoming mindful. |
| [ 0.146496] SELinux: Initializing. |
| [ 0.146511] *** VALIDATE selinux *** |
| [ 0.146514] TOMOYO Linux initialized |
| [ 0.146559] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| [ 0.146593] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| [ 0.146611] *** VALIDATE tmpfs *** |
| [ 0.146736] *** VALIDATE proc *** |
| [ 0.146783] *** VALIDATE cgroup *** |
| [ 0.146785] *** VALIDATE cgroup2 *** |
| [ 0.146830] mce: CPU0: Thermal monitoring enabled (TM1) |
| [ 0.146840] process: using mwait in idle threads |
| [ 0.146843] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.146845] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.146849] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization |
| [ 0.146851] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.146853] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.146855] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.146857] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.146859] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| [ 0.146861] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.146865] MDS: Mitigation: Clear CPU buffers |
| [ 0.147013] Freeing SMP alternatives memory: 32K |
| [ 0.148645] TSC deadline timer enabled |
| [ 0.148648] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.148737] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.148745] ... version: 3 |
| [ 0.148747] ... bit width: 48 |
| [ 0.148748] ... generic registers: 4 |
| [ 0.148749] ... value mask: 0000ffffffffffff |
| [ 0.148751] ... max period: 00007fffffffffff |
| [ 0.148752] ... fixed-purpose events: 3 |
| [ 0.148753] ... event mask: 000000070000000f |
| [ 0.148785] rcu: Hierarchical SRCU implementation. |
| [ 0.149264] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.149309] smp: Bringing up secondary CPUs ... |
| [ 0.149394] x86: Booting SMP configuration: |
| [ 0.149396] .... node #0, CPUs: #1 |
| [ 0.150427] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. |
| [ 0.150427] #2 #3 |
| [ 0.152860] smp: Brought up 1 node, 4 CPUs |
| [ 0.152860] smpboot: Max logical packages: 1 |
| [ 0.152860] smpboot: Total of 4 processors activated (23146.35 BogoMIPS) |
| [ 0.154540] devtmpfs: initialized |
| [ 0.154540] x86/mm: Memory block size: 128MB |
| [ 0.156161] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.156161] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) |
| [ 0.156161] pinctrl core: initialized pinctrl subsystem |
| [ 0.156161] thermal_sys: Registered thermal governor 'fair_share' |
| [ 0.156161] thermal_sys: Registered thermal governor 'bang_bang' |
| [ 0.156161] thermal_sys: Registered thermal governor 'step_wise' |
| [ 0.156161] thermal_sys: Registered thermal governor 'user_space' |
| [ 0.156161] NET: Registered protocol family 16 |
| [ 0.156161] audit: initializing netlink subsys (disabled) |
| [ 0.156161] audit: type=2000 audit(1585144023.028:1): state=initialized audit_enabled=0 res=1 |
| [ 0.156161] cpuidle: using governor ladder |
| [ 0.156161] cpuidle: using governor menu |
| [ 0.156161] ACPI: bus type PCI registered |
| [ 0.156161] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.156161] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.156161] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.156161] PCI: Using configuration type 1 for base access |
| [ 0.156161] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.158580] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.426897] ACPI: Added _OSI(Module Device) |
| [ 0.426897] ACPI: Added _OSI(Processor Device) |
| [ 0.426897] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.426897] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.426897] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.426897] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.426897] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.430430] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.430430] ACPI: EC: EC started |
| [ 0.430430] ACPI: EC: interrupt blocked |
| [ 0.430430] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.430430] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.430430] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions |
| [ 0.430430] ACPI: Interpreter enabled |
| [ 0.430430] ACPI: (supports S0 S3 S4 S5) |
| [ 0.430430] ACPI: Using IOAPIC for interrupt routing |
| [ 0.430430] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.430430] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.434429] ACPI: Power Resource [FPWR] (off) |
| [ 0.434430] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.434430] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| [ 0.434430] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR] |
| [ 0.434430] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.434430] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6dff]) |
| [ 0.434430] PCI host bridge to bus 0000:00 |
| [ 0.434430] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.434430] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.434430] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.434430] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.434430] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.434430] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.434430] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.434430] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.434430] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.434430] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.434430] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.434430] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.434430] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.434430] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.434430] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.434430] pci_bus 0000:00: root bus resource [mem 0xc2a00001-0xefffffff window] |
| [ 0.434430] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.434430] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.434430] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.434430] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.434430] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit] |
| [ 0.434430] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.434430] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| [ 0.434430] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.434430] pci 0000:00:04.0: reg 0x10: [mem 0xe1630000-0xe1637fff 64bit] |
| [ 0.434430] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.434430] pci 0000:00:14.0: reg 0x10: [mem 0xe1620000-0xe162ffff 64bit] |
| [ 0.434430] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.434430] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 |
| [ 0.434430] pci 0000:00:16.0: reg 0x10: [mem 0xe1642000-0xe164200f 64bit] |
| [ 0.434430] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold |
| [ 0.434430] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.434430] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff] |
| [ 0.434430] pci 0000:00:19.0: reg 0x14: [mem 0xe163c000-0xe163cfff] |
| [ 0.434430] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f] |
| [ 0.434430] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.438434] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.438434] pci 0000:00:1a.0: reg 0x10: [mem 0xe163f000-0xe163f3ff] |
| [ 0.438434] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.438434] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.438434] pci 0000:00:1b.0: reg 0x10: [mem 0xe1638000-0xe163bfff 64bit] |
| [ 0.438434] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.438434] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 |
| [ 0.438434] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.438434] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 |
| [ 0.438434] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.438434] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 |
| [ 0.438434] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.438434] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.438434] pci 0000:00:1d.0: reg 0x10: [mem 0xe1640000-0xe16403ff] |
| [ 0.438434] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.438434] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.438434] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.438434] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087] |
| [ 0.438434] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093] |
| [ 0.438434] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f] |
| [ 0.438434] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097] |
| [ 0.438434] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] |
| [ 0.438434] pci 0000:00:1f.2: reg 0x24: [mem 0xe163e000-0xe163e7ff] |
| [ 0.438434] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.438434] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.438434] pci 0000:00:1f.3: reg 0x10: [mem 0xe1641000-0xe16410ff 64bit] |
| [ 0.438434] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.438434] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000 |
| [ 0.438434] pci 0000:00:1f.6: reg 0x10: [mem 0xe163d000-0xe163dfff 64bit] |
| [ 0.438434] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501 |
| [ 0.438434] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.438434] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe14000ff] |
| [ 0.438506] pci 0000:01:00.0: supports D1 D2 |
| [ 0.438509] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.438766] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.438774] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff] |
| [ 0.438878] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000 |
| [ 0.438958] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe150ffff 64bit] |
| [ 0.439251] pci 0000:02:00.0: supports D1 |
| [ 0.439253] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold |
| [ 0.439503] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.439510] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff] |
| [ 0.439577] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.439582] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] |
| [ 0.439587] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff] |
| [ 0.439595] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.439766] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.439809] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.439849] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.439889] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.439933] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.439973] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.440013] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.440052] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.442438] ACPI: EC: interrupt unblocked |
| [ 0.442438] ACPI: EC: event unblocked |
| [ 0.442438] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.442438] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events |
| [ 0.442440] iommu: Default domain type: Translated |
| [ 0.442448] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.442448] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.442448] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.442448] vgaarb: loaded |
| [ 0.442499] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.442501] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.442505] PTP clock support registered |
| [ 0.442511] EDAC MC: Ver: 3.0.0 |
| [ 0.442603] PCI: Using ACPI for IRQ routing |
| [ 0.442604] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.442692] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.442693] e820: reserve RAM buffer [mem 0xbff22000-0xbfffffff] |
| [ 0.442694] e820: reserve RAM buffer [mem 0x43d600000-0x43fffffff] |
| [ 0.442801] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.442801] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.446431] clocksource: Switched to clocksource tsc-early |
| [ 0.457449] *** VALIDATE bpf *** |
| [ 0.457540] VFS: Disk quotas dquot_6.6.0 |
| [ 0.457557] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.457584] *** VALIDATE ramfs *** |
| [ 0.457589] *** VALIDATE hugetlbfs *** |
| [ 0.457643] pnp: PnP ACPI init |
| [ 0.457820] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.457823] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.457825] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.457827] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.457830] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.457832] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.457834] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.457837] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.457839] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.457841] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.457848] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.458256] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.458261] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.458296] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.458299] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.458303] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.458320] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.458346] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.458369] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.458393] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.458409] pnp: PnP ACPI: found 7 devices |
| [ 0.464301] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.464339] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.464348] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff] |
| [ 0.464360] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.464367] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff] |
| [ 0.464379] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.464383] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] |
| [ 0.464390] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff] |
| [ 0.464395] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.464405] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.464407] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.464409] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.464411] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.464413] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window] |
| [ 0.464416] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window] |
| [ 0.464418] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.464420] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.464422] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.464424] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.464426] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.464428] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.464430] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.464432] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.464434] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.464436] pci_bus 0000:00: resource 19 [mem 0xc2a00001-0xefffffff window] |
| [ 0.464438] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.464440] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff] |
| [ 0.464443] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff] |
| [ 0.464445] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] |
| [ 0.464447] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff] |
| [ 0.464449] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.464518] NET: Registered protocol family 2 |
| [ 0.464660] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) |
| [ 0.464681] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) |
| [ 0.464827] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) |
| [ 0.464942] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.464966] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) |
| [ 0.464997] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) |
| [ 0.465070] NET: Registered protocol family 1 |
| [ 0.465083] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.465606] PCI: CLS 64 bytes, default 64 |
| [ 0.465650] Trying to unpack rootfs image as initramfs... |
| [ 0.970746] Freeing initrd memory: 35876K |
| [ 0.994465] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.994472] software IO TLB: mapped [mem 0xbbf22000-0xbff22000] (64MB) |
| [ 0.994916] Initialise system trusted keyrings |
| [ 0.994966] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 0.994997] zbud: loaded |
| [ 0.995209] Key type asymmetric registered |
| [ 0.995211] Asymmetric key parser 'x509' registered |
| [ 0.995220] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) |
| [ 0.995265] io scheduler mq-deadline registered |
| [ 0.995268] io scheduler kyber registered |
| [ 0.995510] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26 |
| [ 0.995733] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27 |
| [ 0.995952] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28 |
| [ 0.995982] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 0.996135] intel_idle: MWAIT substates: 0x21120 |
| [ 0.996135] intel_idle: v0.4.1 model 0x3A |
| [ 0.996311] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 0.996758] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.997181] Linux agpgart interface v0.103 |
| [ 1.002469] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 1.074728] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 1.074731] AMD-Vi: AMD IOMMUv2 functionality not available on this system |
| [ 1.075095] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 1.076623] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.076628] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.076869] mousedev: PS/2 mouse device common for all mice |
| [ 1.076919] rtc_cmos 00:03: RTC can wake from S4 |
| [ 1.077143] rtc_cmos 00:03: registered as rtc0 |
| [ 1.077161] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 1.077171] intel_pstate: Intel P-state driver initializing |
| [ 1.077436] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.077631] drop_monitor: Initializing network drop monitor service |
| [ 1.077817] NET: Registered protocol family 10 |
| [ 1.078264] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 1.078514] Segment Routing with IPv6 |
| [ 1.078550] mip6: Mobile IPv6 |
| [ 1.078555] NET: Registered protocol family 17 |
| [ 1.078562] mpls_gso: MPLS GSO support |
| [ 1.079013] microcode: sig=0x306a9, pf=0x10, revision=0x21 |
| [ 1.079136] microcode: Microcode Update Driver: v2.2. |
| [ 1.079140] IPI shorthand broadcast: enabled |
| [ 1.079161] sched_clock: Marking stable (1078451735, 676089)->(1084011634, -4883810) |
| [ 1.079372] registered taskstats version 1 |
| [ 1.079377] Loading compiled-in X.509 certificates |
| [ 1.079411] zswap: loaded using pool lzo/zbud |
| [ 1.079590] ima: Allocated hash algorithm: sha256 |
| [ 1.207543] ima: No architecture policies found |
| [ 1.208317] rtc_cmos 00:03: setting system clock to 2020-03-25T13:47:04 UTC (1585144024) |
| [ 1.210691] Freeing unused kernel image (initmem) memory: 1612K |
| [ 1.210762] Write protecting the kernel read-only data: 16384k |
| [ 1.211595] Freeing unused kernel image (text/rodata gap) memory: 2044K |
| [ 1.211837] Freeing unused kernel image (rodata/data gap) memory: 292K |
| [ 1.246332] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.246334] x86/mm: Checking user space page tables |
| [ 1.273110] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.273112] Run /init as init process |
| [ 1.273114] with arguments: |
| [ 1.273115] /init |
| [ 1.273115] with environment: |
| [ 1.273116] HOME=/ |
| [ 1.273116] TERM=linux |
| [ 1.273116] BOOT_IMAGE=/boot/vmlinuz-5.6.0-rc7-00001-gdd1d826a5b30 |
| [ 1.389097] ACPI: bus type USB registered |
| [ 1.389125] usbcore: registered new interface driver usbfs |
| [ 1.389136] usbcore: registered new interface driver hub |
| [ 1.389169] usbcore: registered new device driver usb |
| [ 1.390376] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.391796] ehci-pci: EHCI PCI platform driver |
| [ 1.392038] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 1.392041] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 1.393279] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20200110/utaddress-213) |
| [ 1.393292] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.393361] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200110/utaddress-213) |
| [ 1.393411] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.393643] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200110/utaddress-213) |
| [ 1.393653] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.393672] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200110/utaddress-213) |
| [ 1.393681] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.393684] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 1.393743] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.393752] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 1.393766] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.393859] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.396018] battery: ACPI: Battery Slot [BAT0] (battery present) |
| [ 1.396087] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.397683] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.397702] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe163f000 |
| [ 1.397971] SCSI subsystem initialized |
| [ 1.400451] sdhci: Secure Digital Host Controller Interface driver |
| [ 1.400456] sdhci: Copyright(c) Pierre Ossman |
| [ 1.403859] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4) |
| [ 1.409344] libata version 3.00 loaded. |
| [ 1.410022] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| [ 1.410527] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.410585] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06 |
| [ 1.410591] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.410594] usb usb1: Product: EHCI Host Controller |
| [ 1.410597] usb usb1: Manufacturer: Linux 5.6.0-rc7-00001-gdd1d826a5b30 ehci_hcd |
| [ 1.410600] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.410846] hub 1-0:1.0: USB hub found |
| [ 1.410856] hub 1-0:1.0: 3 ports detected |
| [ 1.410942] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.410946] ACPI: Thermal Zone [THM0] (57 C) |
| [ 1.411101] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.411110] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 |
| [ 1.412283] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930 |
| [ 1.412292] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 1.412471] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06 |
| [ 1.412476] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.412479] usb usb2: Product: xHCI Host Controller |
| [ 1.412482] usb usb2: Manufacturer: Linux 5.6.0-rc7-00001-gdd1d826a5b30 xhci-hcd |
| [ 1.412485] usb usb2: SerialNumber: 0000:00:14.0 |
| [ 1.412611] hub 2-0:1.0: USB hub found |
| [ 1.412624] hub 2-0:1.0: 4 ports detected |
| [ 1.412795] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.412803] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 |
| [ 1.412823] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.412840] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.412852] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 |
| [ 1.412856] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed |
| [ 1.412905] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06 |
| [ 1.412908] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.412917] usb usb4: Product: xHCI Host Controller |
| [ 1.412919] usb usb4: Manufacturer: Linux 5.6.0-rc7-00001-gdd1d826a5b30 xhci-hcd |
| [ 1.412921] usb usb4: SerialNumber: 0000:00:14.0 |
| [ 1.412992] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 1.413031] hub 4-0:1.0: USB hub found |
| [ 1.413042] hub 4-0:1.0: 4 ports detected |
| [ 1.413471] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA |
| [ 1.413747] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 1.413751] ACPI: Thermal Zone [THM1] (27 C) |
| [ 1.416754] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.416774] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe1640000 |
| [ 1.430514] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.430570] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06 |
| [ 1.430573] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.430588] usb usb3: Product: EHCI Host Controller |
| [ 1.430591] usb usb3: Manufacturer: Linux 5.6.0-rc7-00001-gdd1d826a5b30 ehci_hcd |
| [ 1.430594] usb usb3: SerialNumber: 0000:00:1d.0 |
| [ 1.430826] hub 3-0:1.0: USB hub found |
| [ 1.430837] hub 3-0:1.0: 3 ports detected |
| [ 1.449007] ahci 0000:00:1f.2: version 3.0 |
| [ 1.449406] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.459538] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode |
| [ 1.459545] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.460309] scsi host0: ahci |
| [ 1.460448] scsi host1: ahci |
| [ 1.460547] scsi host2: ahci |
| [ 1.460648] scsi host3: ahci |
| [ 1.460749] scsi host4: ahci |
| [ 1.460842] scsi host5: ahci |
| [ 1.460901] ata1: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e100 irq 31 |
| [ 1.460907] ata2: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e180 irq 31 |
| [ 1.460911] ata3: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e200 irq 31 |
| [ 1.460915] ata4: DUMMY |
| [ 1.460916] ata5: DUMMY |
| [ 1.460918] ata6: DUMMY |
| [ 1.471514] i915 0000:00:02.0: vgaarb: deactivate vga console |
| [ 1.473144] mmc0: new high speed SDHC card at address b368 |
| [ 1.474157] mmcblk0: mmc0:b368 USD 3.76 GiB |
| [ 1.489599] mmcblk0: p1 |
| [ 1.510421] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.522474] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 1.522483] [drm] Driver supports precise vblank timestamp query. |
| [ 1.523244] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 1.537505] random: fast init done |
| [ 1.577800] [drm] Initialized i915 1.6.0 20200114 for 0000:00:02.0 on minor 0 |
| [ 1.577961] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 1.606288] acpi device:0d: registered as cooling_device5 |
| [ 1.606378] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 |
| [ 1.607209] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:5f:1b:41 |
| [ 1.607215] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.607269] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 1.608356] e1000e 0000:00:19.0 eno0: renamed from eth0 |
| [ 1.750532] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.759136] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd |
| [ 1.766536] usb 3-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.773184] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.773614] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1.774491] ata1.00: ATA-10: Crucial_CT525MX300SSD1, M0CR060, max UDMA/133 |
| [ 1.774509] ata1.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 32), AA |
| [ 1.777169] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1.780239] ata1.00: configured for UDMA/133 |
| [ 1.790592] scsi 0:0:0:0: Direct-Access ATA Crucial_CT525MX3 R060 PQ: 0 ANSI: 5 |
| [ 1.793321] usb 4-1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.17 |
| [ 1.793327] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 1.793330] usb 4-1: Product: 4-Port USB 3.0 Hub |
| [ 1.793333] usb 4-1: Manufacturer: Generic |
| [ 1.794928] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 1.794940] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.795201] hub 1-1:1.0: USB hub found |
| [ 1.795265] hub 1-1:1.0: 6 ports detected |
| [ 1.800809] hub 4-1:1.0: USB hub found |
| [ 1.802043] hub 4-1:1.0: 4 ports detected |
| [ 1.810771] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 1.810779] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.811051] hub 3-1:1.0: USB hub found |
| [ 1.811134] hub 3-1:1.0: 8 ports detected |
| [ 1.813487] fbcon: i915drmfb (fb0) is primary device |
| [ 1.914521] usb 2-1: new high-speed USB device number 2 using xhci_hcd |
| [ 1.950511] usb 2-1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.17 |
| [ 1.950515] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 1.950518] usb 2-1: Product: 4-Port USB 2.0 Hub |
| [ 1.950520] usb 2-1: Manufacturer: Generic |
| [ 1.951897] hub 2-1:1.0: USB hub found |
| [ 1.952790] hub 2-1:1.0: 4 ports detected |
| [ 2.014525] tsc: Refined TSC clocksource calibration: 2893.426 MHz |
| [ 2.014542] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b500ca33a, max_idle_ns: 440795203665 ns |
| [ 2.014586] clocksource: Switched to clocksource tsc |
| [ 2.082469] usb 1-1.4: new full-speed USB device number 3 using ehci-pci |
| [ 2.095171] usb 4-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd |
| [ 2.105348] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 2.132610] usb 4-1.1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.17 |
| [ 2.132614] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.132616] usb 4-1.1: Product: 4-Port USB 3.0 Hub |
| [ 2.132618] usb 4-1.1: Manufacturer: Generic |
| [ 2.141746] hub 4-1.1:1.0: USB hub found |
| [ 2.143690] hub 4-1.1:1.0: 4 ports detected |
| [ 2.194410] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [ 2.195481] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12 |
| [ 2.195484] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.195486] usb 1-1.4: Product: BCM20702A0 |
| [ 2.195488] usb 1-1.4: Manufacturer: Broadcom Corp |
| [ 2.195490] usb 1-1.4: SerialNumber: 7CE9D3E5DCBD |
| [ 2.225630] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [ 2.242483] usb 2-1.1: new high-speed USB device number 3 using xhci_hcd |
| [ 2.274521] usb 1-1.5: new full-speed USB device number 4 using ehci-pci |
| [ 2.280876] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.17 |
| [ 2.280880] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.280884] usb 2-1.1: Product: 4-Port USB 2.0 Hub |
| [ 2.280886] usb 2-1.1: Manufacturer: Generic |
| [ 2.282036] hub 2-1.1:1.0: USB hub found |
| [ 2.282956] hub 2-1.1:1.0: 4 ports detected |
| [ 2.286192] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905 |
| [ 2.286205] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 2.324198] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 |
| [ 2.362522] usb 2-1.3: new high-speed USB device number 4 using xhci_hcd |
| [ 2.387462] usb 1-1.5: New USB device found, idVendor=13d3, idProduct=3304, bcdDevice= 0.01 |
| [ 2.387465] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.389050] usb 2-1.3: New USB device found, idVendor=1d6b, idProduct=0104, bcdDevice= 5.06 |
| [ 2.389054] usb 2-1.3: New USB device strings: Mfr=3, Product=4, SerialNumber=0 |
| [ 2.389056] usb 2-1.3: Product: Multifunction Composite Gadget |
| [ 2.389058] usb 2-1.3: Manufacturer: Linux 5.6.0-1-librem5 with dwc3-gadget |
| [ 2.398305] usb-storage 2-1.3:1.4: USB Mass Storage device detected |
| [ 2.398532] scsi host6: usb-storage 2-1.3:1.4 |
| [ 2.398676] usbcore: registered new interface driver usb-storage |
| [ 2.399617] usbcore: registered new interface driver uas |
| [ 2.421618] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.466490] usb 1-1.6: new high-speed USB device number 5 using ehci-pci |
| [ 2.503111] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea, bcdDevice= 5.18 |
| [ 2.503114] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.503116] usb 1-1.6: Product: Integrated Camera |
| [ 2.503118] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. |
| [ 2.574494] usb 2-1.1.1: new full-speed USB device number 5 using xhci_hcd |
| [ 2.630719] Console: switching to colour frame buffer device 170x48 |
| [ 2.683210] usb 2-1.1.1: New USB device found, idVendor=1a86, idProduct=5523, bcdDevice= 3.04 |
| [ 2.685871] i915 0000:00:02.0: fb0: i915drmfb frame buffer device |
| [ 2.688519] usb 2-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.717386] ata1.00: Enabling discard_zeroes_data |
| [ 2.718863] sd 0:0:0:0: [sda] 1025610768 512-byte logical blocks: (525 GB/489 GiB) |
| [ 2.720797] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.722246] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.722271] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.758943] ata1.00: Enabling discard_zeroes_data |
| [ 2.762877] sda: sda1 sda2 < sda5 > |
| [ 2.766153] ata1.00: Enabling discard_zeroes_data |
| [ 2.768856] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 2.798447] usb 2-1.1.3: new full-speed USB device number 6 using xhci_hcd |
| [ 2.882431] raid6: sse2x4 gen() 16596 MB/s |
| [ 2.899340] usb 2-1.1.3: New USB device found, idVendor=1a86, idProduct=5523, bcdDevice= 3.04 |
| [ 2.900178] usb 2-1.1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.950434] raid6: sse2x4 xor() 8308 MB/s |
| [ 2.972111] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 3.018432] raid6: sse2x2 gen() 13884 MB/s |
| [ 3.086432] raid6: sse2x2 xor() 9642 MB/s |
| [ 3.154431] raid6: sse2x1 gen() 13462 MB/s |
| [ 3.166279] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input4 |
| [ 3.222433] raid6: sse2x1 xor() 8715 MB/s |
| [ 3.223221] raid6: using algorithm sse2x4 gen() 16596 MB/s |
| [ 3.224002] raid6: .... xor() 8308 MB/s, rmw enabled |
| [ 3.224783] raid6: using ssse3x2 recovery algorithm |
| [ 3.225868] xor: automatically using best checksumming function avx |
| [ 3.227013] async_tx: api initialized (async) |
| [ 3.281019] Btrfs loaded, crc32c=crc32c-intel |
| [ 3.425140] scsi 6:0:0:0: Direct-Access Linux File-Stor Gadget 0506 PQ: 0 ANSI: 2 |
| [ 3.429456] sd 6:0:0:0: Power-on or device reset occurred |
| [ 3.433199] sd 6:0:0:0: [sdb] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB) |
| [ 3.436832] sd 6:0:0:0: [sdb] Write Protect is off |
| [ 3.439051] sd 6:0:0:0: [sdb] Mode Sense: 0f 00 00 00 |
| [ 3.440471] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.475860] sd 6:0:0:0: [sdb] Attached SCSI disk |
| [ 3.522400] process '/usr/bin/fstype' started with executable stack |
| [ 3.531343] PM: Image not found (code -22) |
| [ 3.612952] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 3.679847] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. |
| [ 3.791776] systemd[1]: Inserted module 'autofs4' |
| [ 3.811486] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) |
| [ 3.830663] systemd[1]: Detected architecture x86-64. |
| [ 3.853298] systemd[1]: Set hostname to <laptop>. |
| [ 3.924425] random: lvmconfig: uninitialized urandom read (4 bytes read) |
| [ 3.936922] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. |
| [ 3.941663] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) |
| [ 3.991521] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly. |
| [ 4.021673] systemd[1]: Listening on fsck to fsckd communication Socket. |
| [ 4.023444] systemd[1]: Listening on Syslog Socket. |
| [ 4.026481] systemd[1]: Listening on udev Control Socket. |
| [ 4.032299] systemd[1]: Created slice system-tor.slice. |
| [ 4.082974] RPC: Registered named UNIX socket transport module. |
| [ 4.082975] RPC: Registered udp transport module. |
| [ 4.082976] RPC: Registered tcp transport module. |
| [ 4.082976] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 4.089463] lp: driver loaded but no devices found |
| [ 4.104028] ppdev: user-space parallel port driver |
| [ 4.116742] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| [ 4.117668] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro |
| [ 4.120283] random: lvm: uninitialized urandom read (4 bytes read) |
| [ 4.143500] Key type encrypted registered |
| [ 4.146866] random: systemd-random-: uninitialized urandom read (512 bytes read) |
| [ 4.178772] systemd-journald[306]: Received request to flush runtime journal from PID 1 |
| [ 4.322575] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input5 |
| [ 4.323548] ACPI: Sleep Button [SLPB] |
| [ 4.324374] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input6 |
| [ 4.325350] ACPI: Lid Switch [LID] |
| [ 4.326394] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7 |
| [ 4.327611] ACPI: Power Button [PWRF] |
| [ 4.379159] ACPI: AC Adapter [AC] (on-line) |
| [ 4.380334] iTCO_vendor_support: vendor-support=0 |
| [ 4.391518] Non-volatile memory driver v1.3 |
| [ 4.393600] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 4.394807] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 4.396099] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 4.398371] thinkpad_acpi: ThinkPad ACPI Extras v0.26 |
| [ 4.399354] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 4.400359] thinkpad_acpi: ThinkPad BIOS CBET4000 4.11-1765-g4bd6927388-dirty, EC G2HT35WW-3.22 |
| [ 4.401375] thinkpad_acpi: Lenovo ThinkPad X230, model 232566G |
| [ 4.403917] thinkpad_acpi: radio switch found; radios are enabled |
| [ 4.406279] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 4.409161] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 4.410026] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 4.418000] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked |
| [ 4.430327] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 4.431610] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 4.434423] thinkpad_acpi: battery 1 registered (start 0, stop 100) |
| [ 4.434428] battery: new extension: ThinkPad Battery Extension |
| [ 4.437122] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 4.438333] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 4.439431] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 4.440448] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 4.442725] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 |
| [ 4.478925] input: PC Speaker as /devices/platform/pcspkr/input/input9 |
| [ 4.483805] usbcore: registered new interface driver usbserial_generic |
| [ 4.487371] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 4.489122] sd 6:0:0:0: Attached scsi generic sg1 type 0 |
| [ 4.491228] usbserial: USB Serial support registered for generic |
| [ 4.493601] cdc_acm 2-1.3:1.2: ttyACM0: USB ACM device |
| [ 4.496142] usbcore: registered new interface driver cdc_acm |
| [ 4.497214] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters |
| [ 4.499216] Error: Driver 'pcspkr' is already registered, aborting... |
| [ 4.500414] usbcore: registered new interface driver ch341 |
| [ 4.507219] usbserial: USB Serial support registered for ch341-uart |
| [ 4.508505] ch341 2-1.1.1:1.0: ch341-uart converter detected |
| [ 4.510870] usb 2-1.1.1: ch341-uart converter now attached to ttyUSB0 |
| [ 4.512080] ch341 2-1.1.3:1.0: ch341-uart converter detected |
| [ 4.513726] usb 2-1.1.3: ch341-uart converter now attached to ttyUSB1 |
| [ 4.540077] mc: Linux media interface: v0.10 |
| [ 4.541652] cfg80211: Loading compiled-in X.509 certificates for regulatory database |
| [ 4.607478] cryptd: max_cpu_qlen set to 1000 |
| [ 4.609716] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' |
| [ 4.609947] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 |
| [ 4.609949] cfg80211: failed to load regulatory.db |
| [ 4.694052] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 4.697053] AVX version of gcm_enc/dec engaged. |
| [ 4.697054] AES CTR mode by8 optimization enabled |
| [ 4.699822] usbcore: registered new interface driver cdc_ether |
| [ 4.700776] videodev: Linux video capture interface: v2.00 |
| [ 4.702455] Adding 16731132k swap on /dev/sda5. Priority:-2 extents:1 across:16731132k SSFS |
| [ 4.728884] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 4.728886] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 4.728888] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| [ 4.728889] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 4.728890] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 4.728891] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| [ 4.728893] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 |
| [ 4.728894] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| [ 4.735547] rndis_host 2-1.3:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-1.3, RNDIS device, 8e:df:c4:5f:ff:61 |
| [ 4.737520] usbcore: registered new interface driver rndis_host |
| [ 4.744661] usbcore: registered new interface driver rndis_wlan |
| [ 4.745165] Bluetooth: Core ver 2.22 |
| [ 4.745178] NET: Registered protocol family 31 |
| [ 4.745179] Bluetooth: HCI device and connection manager initialized |
| [ 4.745183] Bluetooth: HCI socket layer initialized |
| [ 4.745185] Bluetooth: L2CAP socket layer initialized |
| [ 4.745194] Bluetooth: SCO socket layer initialized |
| [ 4.747966] rndis_host 2-1.3:1.0 enp0s20u1u3: renamed from usb0 |
| [ 4.754389] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 |
| [ 4.754477] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| [ 4.754534] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| [ 4.754590] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| [ 4.754646] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 |
| [ 4.754701] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 |
| [ 4.754746] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| [ 4.754807] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| [ 4.759476] usbcore: registered new interface driver btusb |
| [ 4.771609] usb 1-1.5: Direct firmware load for ath3k-1.fw failed with error -2 |
| [ 4.771612] Bluetooth: Firmware file "ath3k-1.fw" not found |
| [ 4.771616] ath3k: probe of 1-1.5:1.0 failed with error -2 |
| [ 4.771644] usbcore: registered new interface driver ath3k |
| [ 4.819436] random: crng init done |
| [ 4.820456] random: 3 urandom warning(s) missed due to ratelimiting |
| [ 4.853478] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea) |
| [ 4.873259] ath: phy0: Set BT/WLAN RX diversity capability |
| [ 4.885008] Bluetooth: hci0: BCM: chip id 63 |
| [ 4.887011] Bluetooth: hci0: BCM: features 0x07 |
| [ 4.903017] Bluetooth: hci0: BCM20702A |
| [ 4.904009] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [ 4.904028] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [ 4.904030] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [ 4.928911] ath: phy0: ASPM enabled: 0x43 |
| [ 4.929983] ath: EEPROM regdomain: 0x60 |
| [ 4.929983] ath: EEPROM indicates we should expect a direct regpair map |
| [ 4.929985] ath: Country alpha2 being used: 00 |
| [ 4.929985] ath: Regpair used: 0x60 |
| [ 4.932585] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 4.933948] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffaefb406f0000, irq=17 |
| [ 4.941854] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 4.942867] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 4.943534] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0 |
| [ 4.943959] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 4.945617] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 4.946771] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input18 |
| [ 4.948800] usbcore: registered new interface driver uvcvideo |
| [ 4.948801] USB Video Class driver (1.1.1) |
| [ 5.013070] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 5.014049] Bluetooth: BNEP filters: protocol multicast |
| [ 5.015059] Bluetooth: BNEP socket layer initialized |
| [ 5.100996] intel_rapl_common: Found RAPL domain package |
| [ 5.101676] intel_rapl_common: Found RAPL domain core |
| [ 5.102311] intel_rapl_common: Found RAPL domain uncore |
| [ 6.129362] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory |
| [ 6.131469] NFSD: Using legacy client tracking operations. |
| [ 6.133134] NFSD: starting 90-second grace period (net f00000a8) |
| [ 6.398450] mei_me 0000:00:16.0: wait hw ready failed |
| [ 6.399230] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 6.400082] mei_me 0000:00:16.0: H_RST is set = 0x80000015 |
| [ 6.637377] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details. |
| [ 7.659028] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 7.669305] tun: Universal TUN/TAP device driver, 1.6 |
| [ 7.669977] virbr0: port 1(virbr0-nic) entered blocking state |
| [ 7.669979] virbr0: port 1(virbr0-nic) entered disabled state |
| [ 7.670038] device virbr0-nic entered promiscuous mode |
| [ 7.810361] virbr0: port 1(virbr0-nic) entered blocking state |
| [ 7.810365] virbr0: port 1(virbr0-nic) entered listening state |
| [ 7.868781] virbr0: port 1(virbr0-nic) entered disabled state |
| [ 7.907554] wlp2s0: authenticate with e8:df:70:34:c3:00 |
| [ 7.927904] wlp2s0: send auth to e8:df:70:34:c3:00 (try 1/3) |
| [ 8.030453] wlp2s0: send auth to e8:df:70:34:c3:00 (try 2/3) |
| [ 8.037543] wlp2s0: authenticated |
| [ 8.038493] wlp2s0: associate with e8:df:70:34:c3:00 (try 1/3) |
| [ 8.045468] wlp2s0: RX AssocResp from e8:df:70:34:c3:00 (capab=0x1431 status=0 aid=4) |
| [ 8.045662] wlp2s0: associated |
| [ 8.051263] ath: EEPROM regdomain: 0x8028 |
| [ 8.051265] ath: EEPROM indicates we should expect a country code |
| [ 8.051265] ath: doing EEPROM country->regdmn map search |
| [ 8.051266] ath: country maps to regdmn code: 0x37 |
| [ 8.051267] ath: Country alpha2 being used: AT |
| [ 8.051267] ath: Regpair used: 0x37 |
| [ 8.051268] ath: regdomain 0x8028 dynamically updated by country element |
| [ 8.104041] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [ 8.138521] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by e8:df:70:34:c3:00 |
| [ 8.321238] Bluetooth: RFCOMM TTY layer initialized |
| [ 8.321248] Bluetooth: RFCOMM socket layer initialized |
| [ 8.321266] Bluetooth: RFCOMM ver 1.11 |
| [ 8.414460] mei_me 0000:00:16.0: wait hw ready failed |
| [ 8.414466] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 8.414483] mei_me 0000:00:16.0: H_RST is set = 0x80000015 |
| [ 10.430502] mei_me 0000:00:16.0: wait hw ready failed |
| [ 10.430511] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 10.430520] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device |
| [ 10.430523] mei_me 0000:00:16.0: reset failed ret = -19 |
| [ 10.430525] mei_me 0000:00:16.0: link layer initialization failed. |
| [ 10.430528] mei_me 0000:00:16.0: init hw failure. |
| [ 10.430673] mei_me 0000:00:16.0: initialization failed. |
| [ 13.203204] Could not find key with description: [cb23c129620baa90] |
| [ 13.203208] process_request_key_err: No key |
| [ 13.203210] Could not find valid key in user session keyring for sig specified in mount option: [cb23c129620baa90] |
| [ 13.203211] One or more global auth toks could not properly register; rc = [-2] |
| [ 13.203213] Error parsing options; rc = [-2] |
| [ 14.188284] fuse: init (API version 7.31) |
| [ 14.188295] *** VALIDATE fuseblk *** |
| [ 14.188299] *** VALIDATE fuse *** |
| [ 16.018865] rfkill: input handler disabled |
| [ 16.871629] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| [ 35.715958] Bridge firewalling registered |
| [ 35.778730] Initializing XFRM netlink socket |
| [ 90.859724] usb 2-1.3: USB disconnect, device number 4 |
| [ 90.859850] rndis_host 2-1.3:1.0 enp0s20u1u3: unregister 'rndis_host' usb-0000:00:14.0-1.3, RNDIS device |
| [ 90.893310] sd 6:0:0:0: [sdb] Synchronizing SCSI cache |
| [ 90.893368] sd 6:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK |
| [ 102.345695] usb 2-1.3: new high-speed USB device number 7 using xhci_hcd |
| [ 102.366937] usb 2-1.3: New USB device found, idVendor=1d6b, idProduct=0104, bcdDevice= 5.06 |
| [ 102.366945] usb 2-1.3: New USB device strings: Mfr=3, Product=4, SerialNumber=0 |
| [ 102.366949] usb 2-1.3: Product: Multifunction Composite Gadget |
| [ 102.366952] usb 2-1.3: Manufacturer: Linux 5.6.0-1-librem5 with dwc3-gadget |
| [ 102.370334] rndis_host 2-1.3:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-1.3, RNDIS device, ae:75:dc:48:ed:e4 |
| [ 102.370991] cdc_acm 2-1.3:1.2: ttyACM0: USB ACM device |
| [ 102.371736] usb-storage 2-1.3:1.4: USB Mass Storage device detected |
| [ 102.371965] scsi host6: usb-storage 2-1.3:1.4 |
| [ 102.402703] rndis_host 2-1.3:1.0 enp0s20u1u3: renamed from usb0 |
| [ 103.379029] scsi 6:0:0:0: Direct-Access Linux File-Stor Gadget 0506 PQ: 0 ANSI: 2 |
| [ 103.379990] sd 6:0:0:0: Attached scsi generic sg1 type 0 |
| [ 103.380404] sd 6:0:0:0: Power-on or device reset occurred |
| [ 103.384738] sd 6:0:0:0: [sdb] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB) |
| [ 103.389548] sd 6:0:0:0: [sdb] Write Protect is off |
| [ 103.389552] sd 6:0:0:0: [sdb] Mode Sense: 0f 00 00 00 |
| [ 103.389687] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 103.408976] sd 6:0:0:0: [sdb] Attached SCSI disk |
| [ 115.179296] usb 2-1.3: USB disconnect, device number 7 |
| [ 115.179428] rndis_host 2-1.3:1.0 enp0s20u1u3: unregister 'rndis_host' usb-0000:00:14.0-1.3, RNDIS device |
| [ 115.217256] sd 6:0:0:0: [sdb] Synchronizing SCSI cache |
| [ 115.217309] sd 6:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK |
| [ 126.410511] usb 2-1.3: new high-speed USB device number 8 using xhci_hcd |
| [ 126.431724] usb 2-1.3: New USB device found, idVendor=1d6b, idProduct=0104, bcdDevice= 5.06 |
| [ 126.431732] usb 2-1.3: New USB device strings: Mfr=3, Product=4, SerialNumber=0 |
| [ 126.431735] usb 2-1.3: Product: Multifunction Composite Gadget |
| [ 126.431738] usb 2-1.3: Manufacturer: Linux 5.6.0-1-librem5 with dwc3-gadget |
| [ 126.434873] rndis_host 2-1.3:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-1.3, RNDIS device, fe:b4:e7:2f:cf:c2 |
| [ 126.435393] cdc_acm 2-1.3:1.2: ttyACM0: USB ACM device |
| [ 126.436033] usb-storage 2-1.3:1.4: USB Mass Storage device detected |
| [ 126.439777] scsi host6: usb-storage 2-1.3:1.4 |
| [ 126.486158] rndis_host 2-1.3:1.0 enp0s20u1u3: renamed from usb0 |
| [ 127.443091] scsi 6:0:0:0: Direct-Access Linux File-Stor Gadget 0506 PQ: 0 ANSI: 2 |
| [ 127.444152] sd 6:0:0:0: Attached scsi generic sg1 type 0 |
| [ 127.444729] sd 6:0:0:0: Power-on or device reset occurred |
| [ 127.445100] sd 6:0:0:0: [sdb] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB) |
| [ 127.445260] sd 6:0:0:0: [sdb] Write Protect is off |
| [ 127.445268] sd 6:0:0:0: [sdb] Mode Sense: 0f 00 00 00 |
| [ 127.445411] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 127.468985] sd 6:0:0:0: [sdb] Attached SCSI disk |
| [ 136.171006] usb 2-1.3: USB disconnect, device number 8 |
| [ 136.171130] rndis_host 2-1.3:1.0 enp0s20u1u3: unregister 'rndis_host' usb-0000:00:14.0-1.3, RNDIS device |
| [ 136.208363] cdc_acm 2-1.3:1.2: failed to set dtr/rts |
| [ 136.209084] sd 6:0:0:0: [sdb] Synchronizing SCSI cache |
| [ 136.209118] sd 6:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK |
| [ 147.404355] usb 2-1.3: new high-speed USB device number 9 using xhci_hcd |
| [ 147.425254] usb 2-1.3: New USB device found, idVendor=1d6b, idProduct=0104, bcdDevice= 5.06 |
| [ 147.425258] usb 2-1.3: New USB device strings: Mfr=3, Product=4, SerialNumber=0 |
| [ 147.425260] usb 2-1.3: Product: Multifunction Composite Gadget |
| [ 147.425262] usb 2-1.3: Manufacturer: Linux 5.6.0-1-librem5 with dwc3-gadget |
| [ 147.428905] rndis_host 2-1.3:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-1.3, RNDIS device, f2:6a:65:43:fb:f8 |
| [ 147.429300] cdc_acm 2-1.3:1.2: ttyACM0: USB ACM device |
| [ 147.429780] usb-storage 2-1.3:1.4: USB Mass Storage device detected |
| [ 147.434895] scsi host6: usb-storage 2-1.3:1.4 |
| [ 147.477188] rndis_host 2-1.3:1.0 enp0s20u1u3: renamed from usb0 |
| [ 148.460364] scsi 6:0:0:0: Direct-Access Linux File-Stor Gadget 0506 PQ: 0 ANSI: 2 |
| [ 148.460682] sd 6:0:0:0: Attached scsi generic sg1 type 0 |
| [ 148.461144] sd 6:0:0:0: Power-on or device reset occurred |
| [ 148.461385] sd 6:0:0:0: [sdb] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB) |
| [ 148.461514] sd 6:0:0:0: [sdb] Write Protect is off |
| [ 148.461517] sd 6:0:0:0: [sdb] Mode Sense: 0f 00 00 00 |
| [ 148.461675] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 148.493325] sd 6:0:0:0: [sdb] Attached SCSI disk |
| [ 1264.355650] usb 2-1.3: USB disconnect, device number 9 |
| [ 1264.355780] rndis_host 2-1.3:1.0 enp0s20u1u3: unregister 'rndis_host' usb-0000:00:14.0-1.3, RNDIS device |
| [ 1264.379465] sd 6:0:0:0: [sdb] Synchronizing SCSI cache |
| [ 1264.379503] sd 6:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK |
| [43519.896732] perf: interrupt took too long (2547 > 2500), lowering kernel.perf_event_max_sample_rate to 78500 |
| [46703.845766] wlp2s0: authenticate with e8:df:70:34:c3:00 |
| [46703.865260] wlp2s0: send auth to e8:df:70:34:c3:00 (try 1/3) |
| [46703.921577] wlp2s0: send auth to e8:df:70:34:c3:00 (try 2/3) |
| [46704.023621] wlp2s0: send auth to e8:df:70:34:c3:00 (try 3/3) |
| [46704.127615] wlp2s0: authentication with e8:df:70:34:c3:00 timed out |
| [46711.321036] wlp2s0: authenticate with e8:df:70:34:c3:00 |
| [46711.341167] wlp2s0: send auth to e8:df:70:34:c3:00 (try 1/3) |
| [46711.347267] wlp2s0: authenticated |
| [46711.351525] wlp2s0: associate with e8:df:70:34:c3:00 (try 1/3) |
| [46711.357989] wlp2s0: RX AssocResp from e8:df:70:34:c3:00 (capab=0x1431 status=0 aid=3) |
| [46711.358208] wlp2s0: associated |
| [46711.366241] ath: EEPROM regdomain: 0x8028 |
| [46711.366242] ath: EEPROM indicates we should expect a country code |
| [46711.366243] ath: doing EEPROM country->regdmn map search |
| [46711.366244] ath: country maps to regdmn code: 0x37 |
| [46711.366245] ath: Country alpha2 being used: AT |
| [46711.366245] ath: Regpair used: 0x37 |
| [46711.366247] ath: regdomain 0x8028 dynamically updated by country element |
| [46711.443972] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by e8:df:70:34:c3:00 |
| [61371.884632] perf: interrupt took too long (3202 > 3183), lowering kernel.perf_event_max_sample_rate to 62250 |
| [74548.756004] perf: interrupt took too long (4012 > 4002), lowering kernel.perf_event_max_sample_rate to 49750 |
| [77514.187333] usb 2-1.3: new high-speed USB device number 10 using xhci_hcd |
| [77514.207779] usb 2-1.3: device descriptor read/8, error -71 |
| [77514.335637] usb 2-1.3: device descriptor read/8, error -71 |
| [77514.731362] usb 2-1.3: new high-speed USB device number 11 using xhci_hcd |
| [77514.752869] usb 2-1.3: New USB device found, idVendor=1d6b, idProduct=0104, bcdDevice= 5.06 |
| [77514.752882] usb 2-1.3: New USB device strings: Mfr=3, Product=4, SerialNumber=0 |
| [77514.752889] usb 2-1.3: Product: Multifunction Composite Gadget |
| [77514.752895] usb 2-1.3: Manufacturer: Linux 5.6.0-1-librem5 with dwc3-gadget |
| [77514.756561] rndis_host 2-1.3:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-1.3, RNDIS device, 02:57:ce:cd:b7:20 |
| [77514.761001] cdc_acm 2-1.3:1.2: ttyACM0: USB ACM device |
| [77514.762434] usb-storage 2-1.3:1.4: USB Mass Storage device detected |
| [77514.762749] scsi host6: usb-storage 2-1.3:1.4 |
| [77514.777623] rndis_host 2-1.3:1.0 enp0s20u1u3: renamed from usb0 |
| [77515.772032] scsi 6:0:0:0: Direct-Access Linux File-Stor Gadget 0506 PQ: 0 ANSI: 2 |
| [77515.773004] sd 6:0:0:0: Attached scsi generic sg1 type 0 |
| [77515.773347] sd 6:0:0:0: Power-on or device reset occurred |
| [77515.773706] sd 6:0:0:0: [sdb] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB) |
| [77515.773887] sd 6:0:0:0: [sdb] Write Protect is off |
| [77515.773895] sd 6:0:0:0: [sdb] Mode Sense: 0f 00 00 00 |
| [77515.774064] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [77515.789887] sd 6:0:0:0: [sdb] Attached SCSI disk |
| [77560.812986] usb 2-1.3: USB disconnect, device number 11 |
| [77560.813121] rndis_host 2-1.3:1.0 enp0s20u1u3: unregister 'rndis_host' usb-0000:00:14.0-1.3, RNDIS device |
| [77560.847375] sd 6:0:0:0: [sdb] Synchronizing SCSI cache |
| [77560.847437] sd 6:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK |
| [77570.243210] usb 2-1.3: new high-speed USB device number 12 using xhci_hcd |
| [77570.269677] usb 2-1.3: New USB device found, idVendor=1d6b, idProduct=0104, bcdDevice= 5.06 |
| [77570.269685] usb 2-1.3: New USB device strings: Mfr=3, Product=4, SerialNumber=0 |
| [77570.269689] usb 2-1.3: Product: Multifunction Composite Gadget |
| [77570.269692] usb 2-1.3: Manufacturer: Linux 5.6.0-1-librem5 with dwc3-gadget |
| [77570.275577] rndis_host 2-1.3:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-1.3, RNDIS device, ba:cc:01:9a:9a:4f |
| [77570.276213] cdc_acm 2-1.3:1.2: ttyACM0: USB ACM device |
| [77570.276900] usb-storage 2-1.3:1.4: USB Mass Storage device detected |
| [77570.277116] scsi host6: usb-storage 2-1.3:1.4 |
| [77570.290970] rndis_host 2-1.3:1.0 enp0s20u1u3: renamed from usb0 |
| [77571.293297] scsi 6:0:0:0: Direct-Access Linux File-Stor Gadget 0506 PQ: 0 ANSI: 2 |
| [77571.294180] sd 6:0:0:0: Attached scsi generic sg1 type 0 |
| [77571.295863] sd 6:0:0:0: Power-on or device reset occurred |
| [77571.297892] sd 6:0:0:0: [sdb] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB) |
| [77571.298594] sd 6:0:0:0: [sdb] Write Protect is off |
| [77571.298598] sd 6:0:0:0: [sdb] Mode Sense: 0f 00 00 00 |
| [77571.299227] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [77571.328490] sd 6:0:0:0: [sdb] Attached SCSI disk |
| [81407.596753] perf: interrupt took too long (5049 > 5015), lowering kernel.perf_event_max_sample_rate to 39500 |