| [ 0.000000] Linux version 4.19.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-14)) #1 SMP Debian 4.19.16-1 (2019-01-17) |
| [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-2-amd64 root=UUID=749a2872-dfdf-4601-a982-fedcd6f615c4 ro quiet |
| [ 0.000000] x86/fpu: x87 FPU will use FXSAVE |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f351fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007f352000-0x000000007fffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: Getac P470/P470, BIOS 4.9-1305-g237baa1433 04/12/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1995.125 MHz processor |
| [ 0.002598] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.002602] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.002608] last_pfn = 0x7f352 max_arch_pfn = 0x400000000 |
| [ 0.002616] MTRR default type: uncachable |
| [ 0.002617] MTRR fixed ranges enabled: |
| [ 0.002619] 00000-9FFFF write-back |
| [ 0.002621] A0000-BFFFF uncachable |
| [ 0.002622] C0000-FFFFF write-back |
| [ 0.002623] MTRR variable ranges enabled: |
| [ 0.002625] 0 base 000000000 mask F80000000 write-back |
| [ 0.002627] 1 base 07F400000 mask FFFC00000 uncachable |
| [ 0.002628] 2 base 07F800000 mask FFF800000 uncachable |
| [ 0.002630] 3 base 0D0000000 mask FF0000000 write-combining |
| [ 0.002631] 4 disabled |
| [ 0.002632] 5 disabled |
| [ 0.002632] 6 disabled |
| [ 0.002633] 7 disabled |
| [ 0.003999] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.012533] found SMP MP-table at [mem 0x000f60a0-0x000f60af] mapped at [(____ptrval____)] |
| [ 0.012677] Base memory trampoline at [(____ptrval____)] 99000 size 24576 |
| [ 0.012685] BRK [0x1a601000, 0x1a601fff] PGTABLE |
| [ 0.012688] BRK [0x1a602000, 0x1a602fff] PGTABLE |
| [ 0.012690] BRK [0x1a603000, 0x1a603fff] PGTABLE |
| [ 0.012723] BRK [0x1a604000, 0x1a604fff] PGTABLE |
| [ 0.012727] BRK [0x1a605000, 0x1a605fff] PGTABLE |
| [ 0.012853] BRK [0x1a606000, 0x1a606fff] PGTABLE |
| [ 0.012880] RAMDISK: [mem 0x32435000-0x35211fff] |
| [ 0.012890] ACPI: Early table checksum verification disabled |
| [ 0.012969] ACPI: RSDP 0x00000000000F6250 000024 (v02 COREv4) |
| [ 0.012975] ACPI: XSDT 0x000000007F3530E0 000054 (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.012983] ACPI: FACP 0x000000007F3571A0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.012991] ACPI: DSDT 0x000000007F353280 003F1F (v02 COREv4 COREBOOT 20090419 INTL 20180810) |
| [ 0.012996] ACPI: FACS 0x000000007F353240 000040 |
| [ 0.013001] ACPI: FACS 0x000000007F353240 000040 |
| [ 0.013005] ACPI: SSDT 0x000000007F3572A0 000758 (v02 COREv4 COREBOOT 0000002A CORE 00000000) |
| [ 0.013010] ACPI: MCFG 0x000000007F357A00 00003C (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.013015] ACPI: APIC 0x000000007F357A40 000068 (v02 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.013019] ACPI: ECDT 0x000000007F357AB0 000054 (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.013024] ACPI: HPET 0x000000007F359B10 000038 (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.013036] ACPI: Local APIC address 0xfee00000 |
| [ 0.013145] No NUMA configuration found |
| [ 0.013146] Faking a node at [mem 0x0000000000000000-0x000000007f351fff] |
| [ 0.013152] NODE_DATA(0) allocated [mem 0x7f34d000-0x7f351fff] |
| [ 0.013189] Zone ranges: |
| [ 0.013190] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.013192] DMA32 [mem 0x0000000001000000-0x000000007f351fff] |
| [ 0.013194] Normal empty |
| [ 0.013196] Device empty |
| [ 0.013197] Movable zone start for each node |
| [ 0.013198] Early memory node ranges |
| [ 0.013199] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.013201] node 0: [mem 0x0000000000100000-0x000000007f351fff] |
| [ 0.013205] Reserved but unavailable: 98 pages |
| [ 0.013207] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f351fff] |
| [ 0.013209] On node 0 totalpages: 520944 |
| [ 0.013210] DMA zone: 64 pages used for memmap |
| [ 0.013211] DMA zone: 21 pages reserved |
| [ 0.013212] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.014016] DMA32 zone: 8078 pages used for memmap |
| [ 0.014018] DMA32 zone: 516946 pages, LIFO batch:63 |
| [ 0.043289] Reserving Intel graphics memory at [mem 0x7f800000-0x7fffffff] |
| [ 0.043679] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.043683] ACPI: Local APIC address 0xfee00000 |
| [ 0.043697] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.043698] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.043716] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.043719] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) |
| [ 0.043722] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.043724] ACPI: IRQ0 used by override. |
| [ 0.043725] ACPI: IRQ9 used by override. |
| [ 0.043728] Using ACPI (MADT) for SMP configuration information |
| [ 0.043730] ACPI: HPET id: 0x8086a201 base: 0xfed00000 |
| [ 0.043741] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| [ 0.043759] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.043761] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.043762] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.043763] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.043766] [mem 0x80000000-0xefffffff] available for PCI devices |
| [ 0.043768] Booting paravirtualized kernel on bare hardware |
| [ 0.043774] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.245594] random: get_random_bytes called from start_kernel+0x93/0x531 with crng_init=0 |
| [ 0.245607] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 |
| [ 0.246711] percpu: Embedded 44 pages/cpu @(____ptrval____) s143192 r8192 d28840 u1048576 |
| [ 0.246719] pcpu-alloc: s143192 r8192 d28840 u1048576 alloc=1*2097152 |
| [ 0.246722] pcpu-alloc: [0] 0 1 |
| [ 0.246757] Built 1 zonelists, mobility grouping on. Total pages: 512781 |
| [ 0.246758] Policy zone: DMA32 |
| [ 0.246763] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-2-amd64 root=UUID=749a2872-dfdf-4601-a982-fedcd6f615c4 ro quiet |
| [ 0.246916] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.246918] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.277412] Memory: 1978140K/2083776K available (10252K kernel code, 1236K rwdata, 3196K rodata, 1572K init, 2332K bss, 105636K reserved, 0K cma-reserved) |
| [ 0.277618] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 |
| [ 0.277635] Kernel/User page tables isolation: enabled |
| [ 0.277716] ftrace: allocating 31615 entries in 124 pages |
| [ 0.299814] rcu: Hierarchical RCU implementation. |
| [ 0.299817] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. |
| [ 0.299819] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 |
| [ 0.304264] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16 |
| [ 0.306813] Console: colour VGA+ 80x25 |
| [ 0.306819] console [tty0] enabled |
| [ 0.306845] ACPI: Core revision 20180810 |
| [ 0.307050] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.307063] hpet clockevent registered |
| [ 0.307070] APIC: Switch to symmetric I/O mode setup |
| [ 0.307534] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.327068] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39846218aee, max_idle_ns: 881590756576 ns |
| [ 0.327086] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.25 BogoMIPS (lpj=7980500) |
| [ 0.327090] pid_max: default: 32768 minimum: 301 |
| [ 0.327140] Security Framework initialized |
| [ 0.327143] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.327173] AppArmor: AppArmor initialized |
| [ 0.328177] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| [ 0.328897] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) |
| [ 0.328933] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.328955] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.329329] mce: CPU supports 6 MCE banks |
| [ 0.329338] CPU0: Thermal monitoring enabled (TM2) |
| [ 0.329341] process: using mwait in idle threads |
| [ 0.329348] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 |
| [ 0.329350] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 |
| [ 0.329352] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.329353] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.329355] Speculative Store Bypass: Vulnerable |
| [ 0.329574] Freeing SMP alternatives memory: 24K |
| [ 0.335070] smpboot: CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (family: 0x6, model: 0xf, stepping: 0x6) |
| [ 0.335070] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver. |
| [ 0.335070] core: PEBS disabled due to CPU errata |
| [ 0.335070] ... version: 2 |
| [ 0.335070] ... bit width: 40 |
| [ 0.335070] ... generic registers: 2 |
| [ 0.335070] ... value mask: 000000ffffffffff |
| [ 0.335070] ... max period: 000000007fffffff |
| [ 0.335070] ... fixed-purpose events: 3 |
| [ 0.335070] ... event mask: 0000000700000003 |
| [ 0.335070] rcu: Hierarchical SRCU implementation. |
| [ 0.335070] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.335070] smp: Bringing up secondary CPUs ... |
| [ 0.335070] x86: Booting SMP configuration: |
| [ 0.335070] .... node #0, CPUs: #1 |
| [ 0.335165] smp: Brought up 1 node, 2 CPUs |
| [ 0.335165] smpboot: Max logical packages: 1 |
| [ 0.335165] smpboot: Total of 2 processors activated (7980.50 BogoMIPS) |
| [ 0.337299] devtmpfs: initialized |
| [ 0.337299] x86/mm: Memory block size: 128MB |
| [ 0.339171] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.339179] futex hash table entries: 512 (order: 3, 32768 bytes) |
| [ 0.339255] pinctrl core: initialized pinctrl subsystem |
| [ 0.339514] NET: Registered protocol family 16 |
| [ 0.339640] audit: initializing netlink subsys (disabled) |
| [ 0.339652] audit: type=2000 audit(1555084937.032:1): state=initialized audit_enabled=0 res=1 |
| [ 0.339652] cpuidle: using governor ladder |
| [ 0.339652] cpuidle: using governor menu |
| [ 0.339652] ACPI: bus type PCI registered |
| [ 0.339652] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.339652] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.339652] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.339652] PCI: Using configuration type 1 for base access |
| [ 0.340355] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.340355] ACPI: Added _OSI(Module Device) |
| [ 0.340355] ACPI: Added _OSI(Processor Device) |
| [ 0.340355] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.340355] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.340355] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.340355] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.340355] ACPI: EC: EC started |
| [ 0.340355] ACPI: EC: interrupt blocked |
| [ 0.340355] ACPI: \: Used as first EC |
| [ 0.340355] ACPI: \: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.340355] ACPI: \: Used as boot ECDT EC to handle transactions |
| [ 0.343528] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.344330] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored |
| [ 0.344468] ACPI: Interpreter enabled |
| [ 0.344492] ACPI: (supports S0 S3 S4 S5) |
| [ 0.344493] ACPI: Using IOAPIC for interrupt routing |
| [ 0.344522] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.347196] ACPI: Enabled 12 GPEs in block 00 to 1F |
| [ 0.607329] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.607335] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.607392] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] |
| [ 0.607403] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.607466] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6dff]) |
| [ 0.607723] PCI host bridge to bus 0000:00 |
| [ 0.607726] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.607728] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.607731] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.607733] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.607735] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.607737] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.607739] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.607741] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.607743] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.607745] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.607747] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.607749] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.607751] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.607753] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.607755] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.607757] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window] |
| [ 0.607759] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.607761] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.607773] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000 |
| [ 0.607934] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000 |
| [ 0.607947] pci 0000:00:02.0: reg 0x10: [mem 0xe4300000-0xe437ffff] |
| [ 0.607953] pci 0000:00:02.0: reg 0x14: [io 0x4090-0x4097] |
| [ 0.607960] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref] |
| [ 0.607966] pci 0000:00:02.0: reg 0x1c: [mem 0xe4400000-0xe443ffff] |
| [ 0.608100] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000 |
| [ 0.608112] pci 0000:00:02.1: reg 0x10: [mem 0xe4380000-0xe43fffff] |
| [ 0.608306] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 |
| [ 0.608338] pci 0000:00:1b.0: reg 0x10: [mem 0xe4440000-0xe4443fff 64bit] |
| [ 0.608450] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.608594] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 |
| [ 0.608710] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.608855] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 |
| [ 0.608974] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.609117] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400 |
| [ 0.609227] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.609374] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 |
| [ 0.609493] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold |
| [ 0.609639] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 |
| [ 0.609699] pci 0000:00:1d.0: reg 0x20: [io 0x4000-0x401f] |
| [ 0.609842] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 |
| [ 0.609902] pci 0000:00:1d.1: reg 0x20: [io 0x4020-0x403f] |
| [ 0.610046] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 |
| [ 0.610106] pci 0000:00:1d.2: reg 0x20: [io 0x4040-0x405f] |
| [ 0.610248] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 |
| [ 0.610308] pci 0000:00:1d.3: reg 0x20: [io 0x4060-0x407f] |
| [ 0.610459] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 |
| [ 0.610486] pci 0000:00:1d.7: reg 0x10: [mem 0xe4444000-0xe44443ff] |
| [ 0.610587] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold |
| [ 0.610712] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 |
| [ 0.610901] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100 |
| [ 0.611019] pci 0000:00:1f.0: quirk: [io 0x0500-0x057f] claimed by ICH6 ACPI/GPIO/TCO |
| [ 0.611026] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO |
| [ 0.611030] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 02e0 (mask 001f) |
| [ 0.611034] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0600 (mask 00ff) |
| [ 0.611038] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007) |
| [ 0.611194] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180 |
| [ 0.611219] pci 0000:00:1f.2: reg 0x10: [io 0x4098-0x409f] |
| [ 0.611230] pci 0000:00:1f.2: reg 0x14: [io 0x40a8-0x40ab] |
| [ 0.611242] pci 0000:00:1f.2: reg 0x18: [io 0x40a0-0x40a7] |
| [ 0.611254] pci 0000:00:1f.2: reg 0x1c: [io 0x40ac-0x40af] |
| [ 0.611265] pci 0000:00:1f.2: reg 0x20: [io 0x4080-0x408f] |
| [ 0.611290] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.611292] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.611294] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.611296] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.611329] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.611450] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 |
| [ 0.611529] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.611738] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.611865] pci 0000:02:00.0: [8086:4222] type 00 class 0x028000 |
| [ 0.611963] pci 0000:02:00.0: reg 0x10: [mem 0xe4100000-0xe4100fff] |
| [ 0.612412] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.612621] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.612650] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.612658] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff] |
| [ 0.612728] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.612824] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 0.612869] pci 0000:04:00.0: reg 0x10: [io 0x3000-0x30ff] |
| [ 0.612911] pci 0000:04:00.0: reg 0x18: [mem 0xe4220000-0xe4220fff 64bit] |
| [ 0.612959] pci 0000:04:00.0: reg 0x30: [mem 0xe4200000-0xe421ffff pref] |
| [ 0.612974] pci 0000:04:00.0: enabling Extended Tags |
| [ 0.613098] pci 0000:04:00.0: supports D1 D2 |
| [ 0.613100] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold |
| [ 0.613228] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.613240] pci 0000:00:1c.3: PCI bridge to [bus 04] |
| [ 0.613245] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] |
| [ 0.613250] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff] |
| [ 0.613282] pci_bus 0000:05: extended config space not accessible |
| [ 0.613387] pci 0000:05:05.0: [104c:8039] type 02 class 0x060700 |
| [ 0.613412] pci 0000:05:05.0: reg 0x10: [mem 0xe2004000-0xe2004fff] |
| [ 0.613457] pci 0000:05:05.0: supports D1 D2 |
| [ 0.613459] pci 0000:05:05.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.613555] pci 0000:05:05.1: [104c:803a] type 00 class 0x0c0010 |
| [ 0.613583] pci 0000:05:05.1: reg 0x10: [mem 0xe2008000-0xe20087ff] |
| [ 0.613597] pci 0000:05:05.1: reg 0x14: [mem 0xe0000000-0xe0003fff] |
| [ 0.613702] pci 0000:05:05.1: supports D1 D2 |
| [ 0.613705] pci 0000:05:05.1: PME# supported from D0 D1 D2 D3hot |
| [ 0.613795] pci 0000:05:05.2: [104c:803b] type 00 class 0x018000 |
| [ 0.613820] pci 0000:05:05.2: reg 0x10: [mem 0xe2005000-0xe2005fff] |
| [ 0.613934] pci 0000:05:05.2: supports D1 D2 |
| [ 0.613937] pci 0000:05:05.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.614023] pci 0000:05:05.3: [104c:803c] type 00 class 0x080501 |
| [ 0.614047] pci 0000:05:05.3: reg 0x10: [mem 0xe2009000-0xe20090ff] |
| [ 0.614162] pci 0000:05:05.3: supports D1 D2 |
| [ 0.614164] pci 0000:05:05.3: PME# supported from D0 D1 D2 D3hot |
| [ 0.614250] pci 0000:05:05.4: [104c:803d] type 00 class 0x078000 |
| [ 0.614276] pci 0000:05:05.4: reg 0x10: [mem 0xe2006000-0xe2006fff] |
| [ 0.614290] pci 0000:05:05.4: reg 0x14: [mem 0xe2007000-0xe2007fff] |
| [ 0.614392] pci 0000:05:05.4: supports D1 D2 |
| [ 0.614394] pci 0000:05:05.4: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.614519] pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode) |
| [ 0.614524] pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff] |
| [ 0.614529] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe20fffff] |
| [ 0.614537] pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe40fffff 64bit pref] |
| [ 0.614539] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) |
| [ 0.614541] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) |
| [ 0.614544] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) |
| [ 0.614546] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode) |
| [ 0.614548] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode) |
| [ 0.614550] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode) |
| [ 0.614552] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) |
| [ 0.614554] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) |
| [ 0.614556] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) |
| [ 0.614559] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) |
| [ 0.614561] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) |
| [ 0.614563] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode) |
| [ 0.614565] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode) |
| [ 0.614567] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode) |
| [ 0.614570] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode) |
| [ 0.614572] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode) |
| [ 0.614574] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) |
| [ 0.614610] pci_bus 0000:06: extended config space not accessible |
| [ 0.614638] pci_bus 0000:06: busn_res: [bus 06] end can not be updated to 09 |
| [ 0.614645] pci 0000:00:1e.0: bridge has subordinate 06 but max busn 09 |
| [ 0.614814] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 12 14 15) |
| [ 0.614885] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 11 12 14 15) *10 |
| [ 0.614959] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12 14 15) |
| [ 0.615027] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 11 12 14 15) *10 |
| [ 0.615102] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled. |
| [ 0.615171] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled. |
| [ 0.615238] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12 14 15) |
| [ 0.615305] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *10 |
| [ 0.616283] ACPI: EC: interrupt unblocked |
| [ 0.616314] ACPI: EC: event unblocked |
| [ 0.616325] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.616328] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events |
| [ 0.616425] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.616425] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.616425] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.616425] vgaarb: loaded |
| [ 0.616425] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.616425] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.616425] PTP clock support registered |
| [ 0.616425] EDAC MC: Ver: 3.0.0 |
| [ 0.616425] PCI: Using ACPI for IRQ routing |
| [ 0.619323] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.619418] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.619420] e820: reserve RAM buffer [mem 0x7f352000-0x7fffffff] |
| [ 0.619584] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 0.619584] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| [ 0.619584] hpet0: 3 comparators, 64-bit 14.318180 MHz counter |
| [ 0.621268] clocksource: Switched to clocksource tsc-early |
| [ 0.637895] VFS: Disk quotas dquot_6.6.0 |
| [ 0.637925] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.638130] AppArmor: AppArmor Filesystem Enabled |
| [ 0.638165] pnp: PnP ACPI init |
| [ 0.893202] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.893205] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved |
| [ 0.893207] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.893210] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.893213] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.893215] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.893218] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.893220] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.893230] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.893549] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.893556] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.893633] system 00:02: [io 0x0800-0x080f] has been reserved |
| [ 0.893636] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.893638] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.893645] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.893683] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.894080] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 0.894228] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (disabled) |
| [ 0.894596] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 0.894967] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 0.895012] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.895057] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.895091] pnp: PnP ACPI: found 10 devices |
| [ 0.902283] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.902307] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 |
| [ 0.902311] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 |
| [ 0.902314] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 |
| [ 0.902370] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff] |
| [ 0.902382] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref] |
| [ 0.902386] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff] |
| [ 0.902390] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.902394] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] |
| [ 0.902400] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff] |
| [ 0.902405] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref] |
| [ 0.902413] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.902419] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff] |
| [ 0.902429] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.902444] pci 0000:00:1c.3: PCI bridge to [bus 04] |
| [ 0.902448] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] |
| [ 0.902454] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff] |
| [ 0.902473] pci 0000:05:05.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref] |
| [ 0.902480] pci 0000:05:05.0: BAR 16: assigned [mem 0x88000000-0x8bffffff] |
| [ 0.902482] pci 0000:05:05.0: BAR 13: assigned [io 0x1000-0x10ff] |
| [ 0.902485] pci 0000:05:05.0: BAR 14: assigned [io 0x1400-0x14ff] |
| [ 0.902488] pci 0000:05:05.0: CardBus bridge to [bus 06] |
| [ 0.902490] pci 0000:05:05.0: bridge window [io 0x1000-0x10ff] |
| [ 0.902495] pci 0000:05:05.0: bridge window [io 0x1400-0x14ff] |
| [ 0.902500] pci 0000:05:05.0: bridge window [mem 0x84000000-0x87ffffff pref] |
| [ 0.902505] pci 0000:05:05.0: bridge window [mem 0x88000000-0x8bffffff] |
| [ 0.902511] pci 0000:00:1e.0: PCI bridge to [bus 05-06] |
| [ 0.902514] pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff] |
| [ 0.902520] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe20fffff] |
| [ 0.902525] pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe40fffff 64bit pref] |
| [ 0.902533] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.902536] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.902538] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.902540] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.902542] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window] |
| [ 0.902544] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window] |
| [ 0.902546] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.902548] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.902550] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.902552] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.902554] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.902556] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.902558] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.902561] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.902563] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.902565] pci_bus 0000:00: resource 19 [mem 0x80000000-0xfebfffff window] |
| [ 0.902567] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.902569] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] |
| [ 0.902571] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff] |
| [ 0.902573] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref] |
| [ 0.902575] pci_bus 0000:02: resource 1 [mem 0xe4100000-0xe41fffff] |
| [ 0.902578] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] |
| [ 0.902580] pci_bus 0000:04: resource 1 [mem 0xe4200000-0xe42fffff] |
| [ 0.902582] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff] |
| [ 0.902584] pci_bus 0000:05: resource 1 [mem 0xe0000000-0xe20fffff] |
| [ 0.902586] pci_bus 0000:05: resource 2 [mem 0xe2100000-0xe40fffff 64bit pref] |
| [ 0.902588] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.902590] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] |
| [ 0.902592] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.902594] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.902596] pci_bus 0000:05: resource 8 [mem 0x000c8000-0x000cbfff window] |
| [ 0.902598] pci_bus 0000:05: resource 9 [mem 0x000cc000-0x000cffff window] |
| [ 0.902600] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.902603] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.902605] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.902607] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.902609] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.902611] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.902613] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.902615] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.902617] pci_bus 0000:05: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.902619] pci_bus 0000:05: resource 19 [mem 0x80000000-0xfebfffff window] |
| [ 0.902621] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.902623] pci_bus 0000:06: resource 0 [io 0x1000-0x10ff] |
| [ 0.902625] pci_bus 0000:06: resource 1 [io 0x1400-0x14ff] |
| [ 0.902627] pci_bus 0000:06: resource 2 [mem 0x84000000-0x87ffffff pref] |
| [ 0.902629] pci_bus 0000:06: resource 3 [mem 0x88000000-0x8bffffff] |
| [ 0.902739] NET: Registered protocol family 2 |
| [ 0.902965] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes) |
| [ 0.902987] TCP established hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.903064] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) |
| [ 0.903188] TCP: Hash tables configured (established 16384 bind 16384) |
| [ 0.903255] UDP hash table entries: 1024 (order: 3, 32768 bytes) |
| [ 0.903274] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) |
| [ 0.903344] NET: Registered protocol family 1 |
| [ 0.903365] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.904363] PCI: CLS 64 bytes, default 64 |
| [ 0.904423] Unpacking initramfs... |
| [ 1.947455] Freeing initrd memory: 46964K |
| [ 1.948875] Initialise system trusted keyrings |
| [ 1.948978] workingset: timestamp_bits=40 max_order=19 bucket_order=0 |
| [ 1.951524] zbud: loaded |
| [ 1.951881] pstore: using deflate compression |
| [ 2.248112] Key type asymmetric registered |
| [ 2.248115] Asymmetric key parser 'x509' registered |
| [ 2.248135] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) |
| [ 2.248188] io scheduler noop registered |
| [ 2.248189] io scheduler deadline registered |
| [ 2.248250] io scheduler cfq registered (default) |
| [ 2.248252] io scheduler mq-deadline registered |
| [ 2.248451] pcieport 0000:00:1c.0: enabling device (0104 -> 0107) |
| [ 2.249467] pcieport 0000:00:1c.0: Signaling PME with IRQ 24 |
| [ 2.249498] pcieport 0000:00:1c.1: Signaling PME with IRQ 25 |
| [ 2.249530] pcieport 0000:00:1c.2: Signaling PME with IRQ 26 |
| [ 2.249561] pcieport 0000:00:1c.3: Signaling PME with IRQ 27 |
| [ 2.249594] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum) |
| [ 2.249694] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 2.249718] intel_idle: does not run on family 6 model 15 |
| [ 2.249898] Monitor-Mwait will be used to enter C-1 state |
| [ 2.249909] tsc: Marking TSC unstable due to TSC halts in idle |
| [ 2.250350] clocksource: Switched to clocksource hpet |
| [ 2.250373] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 2.271096] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 2.271237] serial 00:05: [io 0x02f8-0x02ff] |
| [ 2.271303] serial 00:05: [irq 3] |
| [ 2.271966] serial 00:05: activated |
| [ 2.292628] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 2.313408] 00:06: ttyS2 at I/O 0x3e8 (irq = 5, base_baud = 115200) is a 16550A |
| [ 2.334186] 00:07: ttyS3 at I/O 0x2e8 (irq = 5, base_baud = 115200) is a 16550A |
| [ 2.334598] Linux agpgart interface v0.103 |
| [ 2.334754] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 2.334755] AMD IOMMUv2 functionality not available on this system |
| [ 2.335038] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 2.337364] i8042: Detected active multiplexing controller, rev 1.1 |
| [ 2.338582] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 2.338589] serio: i8042 AUX0 port at 0x60,0x64 irq 12 |
| [ 2.338633] serio: i8042 AUX1 port at 0x60,0x64 irq 12 |
| [ 2.338672] serio: i8042 AUX2 port at 0x60,0x64 irq 12 |
| [ 2.338712] serio: i8042 AUX3 port at 0x60,0x64 irq 12 |
| [ 2.338906] mousedev: PS/2 mouse device common for all mice |
| [ 2.338967] rtc_cmos 00:03: RTC can wake from S4 |
| [ 2.339201] rtc_cmos 00:03: registered as rtc0 |
| [ 2.339228] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs |
| [ 2.339279] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.339803] NET: Registered protocol family 10 |
| [ 2.345787] Segment Routing with IPv6 |
| [ 2.345816] mip6: Mobile IPv6 |
| [ 2.345820] NET: Registered protocol family 17 |
| [ 2.345825] mpls_gso: MPLS GSO support |
| [ 2.346037] microcode: sig=0x6f6, pf=0x20, revision=0xd1 |
| [ 2.346123] microcode: Microcode Update Driver: v2.2. |
| [ 2.346370] registered taskstats version 1 |
| [ 2.346371] Loading compiled-in X.509 certificates |
| [ 2.363670] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 2.415601] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff' |
| [ 2.415624] zswap: loaded using pool lzo/zbud |
| [ 2.415828] AppArmor: AppArmor sha1 policy hashing enabled |
| [ 2.416404] rtc_cmos 00:03: setting system clock to 2019-04-12 16:02:19 UTC (1555084939) |
| [ 2.416434] Unstable clock detected, switching default tracing clock to "global" |
| If you want to keep using the local clock, then add: |
| "trace_clock=local" |
| on the kernel command line |
| [ 2.419328] Freeing unused kernel image memory: 1572K |
| [ 2.431181] Write protecting the kernel read-only data: 16384k |
| [ 2.432557] Freeing unused kernel image memory: 2028K |
| [ 2.433159] Freeing unused kernel image memory: 900K |
| [ 2.445411] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 2.445501] x86/mm: Checking user space page tables |
| [ 2.457757] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 2.457761] Run /init as init process |
| [ 2.552416] input: Lid Switch as /devices/LNXSYSTM:00/PNP0C0D:00/input/input4 |
| [ 2.552429] ACPI: Lid Switch [LID0] |
| [ 2.552496] input: Sleep Button as /devices/LNXSYSTM:00/PNP0C0E:00/input/input5 |
| [ 2.552507] ACPI: Sleep Button [SLPB] |
| [ 2.552563] input: Power Button as /devices/LNXSYSTM:00/PNP0C0C:00/input/input6 |
| [ 2.553236] ACPI: Power Button [PWRB] |
| [ 2.553305] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7 |
| [ 2.553320] ACPI: Power Button [PWRF] |
| [ 2.626522] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20180810/utaddress-213) |
| [ 2.626530] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.626534] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004BB (\GPIO) (20180810/utaddress-213) |
| [ 2.626538] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.626540] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004BB (\GPIO) (20180810/utaddress-213) |
| [ 2.626544] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.626545] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 2.644209] SCSI subsystem initialized |
| [ 2.645502] ACPI: bus type USB registered |
| [ 2.645534] usbcore: registered new interface driver usbfs |
| [ 2.645547] usbcore: registered new interface driver hub |
| [ 2.656347] usbcore: registered new device driver usb |
| [ 2.660051] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 2.662874] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.664677] ACPI: Invalid active0 threshold |
| [ 2.665133] uhci_hcd: USB Universal Host Controller Interface driver |
| [ 2.665292] uhci_hcd 0000:00:1d.0: UHCI Host Controller |
| [ 2.665301] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 |
| [ 2.665312] uhci_hcd 0000:00:1d.0: detected 2 ports |
| [ 2.665347] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004000 |
| [ 2.665441] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 |
| [ 2.665444] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.665446] usb usb1: Product: UHCI Host Controller |
| [ 2.665448] usb usb1: Manufacturer: Linux 4.19.0-2-amd64 uhci_hcd |
| [ 2.665450] usb usb1: SerialNumber: 0000:00:1d.0 |
| [ 2.665986] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 2.665988] ACPI: Thermal Zone [THRM] (51 C) |
| [ 2.666443] ehci-pci: EHCI PCI platform driver |
| [ 2.674281] libphy: r8169: probed |
| [ 2.674900] r8169 0000:04:00.0 eth0: RTL8168b/8111b, 00:40:d0:e4:58:4b, XID 38000000, IRQ 28 |
| [ 2.674903] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] |
| [ 2.695230] hub 1-0:1.0: USB hub found |
| [ 2.695242] hub 1-0:1.0: 2 ports detected |
| [ 2.695336] libata version 3.00 loaded. |
| [ 2.696957] ata_piix 0000:00:1f.2: version 2.13 |
| [ 2.697099] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] |
| [ 2.697975] ehci-pci 0000:00:1d.7: EHCI Host Controller |
| [ 2.697985] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 |
| [ 2.698001] ehci-pci 0000:00:1d.7: debug port 1 |
| [ 2.700008] sdhci: Secure Digital Host Controller Interface driver |
| [ 2.700009] sdhci: Copyright(c) Pierre Ossman |
| [ 2.701930] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported |
| [ 2.701938] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe4444000 |
| [ 2.705655] sdhci-pci 0000:05:05.3: SDHCI controller found [104c:803c] (rev 0) |
| [ 2.705771] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 2.705829] scsi host0: ata_piix |
| [ 2.715346] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 |
| [ 2.715434] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 |
| [ 2.715437] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.715439] usb usb2: Product: EHCI Host Controller |
| [ 2.715441] usb usb2: Manufacturer: Linux 4.19.0-2-amd64 ehci_hcd |
| [ 2.715443] usb usb2: SerialNumber: 0000:00:1d.7 |
| [ 2.715664] hub 2-0:1.0: USB hub found |
| [ 2.715676] hub 2-0:1.0: 8 ports detected |
| [ 2.715717] mmc0: SDHCI controller on PCI [0000:05:05.3] using DMA |
| [ 2.721115] scsi host1: ata_piix |
| [ 2.721212] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4080 irq 14 |
| [ 2.721214] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4088 irq 15 |
| [ 2.731144] firewire_ohci 0000:05:05.1: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 |
| [ 2.743184] hub 1-0:1.0: USB hub found |
| [ 2.743199] hub 1-0:1.0: 2 ports detected |
| [ 2.756518] uhci_hcd 0000:00:1d.1: UHCI Host Controller |
| [ 2.756529] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 |
| [ 2.756539] uhci_hcd 0000:00:1d.1: detected 2 ports |
| [ 2.756569] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004020 |
| [ 2.756804] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 |
| [ 2.756806] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.756809] usb usb3: Product: UHCI Host Controller |
| [ 2.756811] usb usb3: Manufacturer: Linux 4.19.0-2-amd64 uhci_hcd |
| [ 2.756813] usb usb3: SerialNumber: 0000:00:1d.1 |
| [ 2.757354] hub 3-0:1.0: USB hub found |
| [ 2.757366] hub 3-0:1.0: 2 ports detected |
| [ 2.757676] uhci_hcd 0000:00:1d.2: UHCI Host Controller |
| [ 2.757686] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 |
| [ 2.757696] uhci_hcd 0000:00:1d.2: detected 2 ports |
| [ 2.757733] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 |
| [ 2.757808] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 |
| [ 2.757811] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.757813] usb usb4: Product: UHCI Host Controller |
| [ 2.757815] usb usb4: Manufacturer: Linux 4.19.0-2-amd64 uhci_hcd |
| [ 2.757817] usb usb4: SerialNumber: 0000:00:1d.2 |
| [ 2.757963] hub 4-0:1.0: USB hub found |
| [ 2.757973] hub 4-0:1.0: 2 ports detected |
| [ 2.758218] uhci_hcd 0000:00:1d.3: UHCI Host Controller |
| [ 2.758225] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 |
| [ 2.758234] uhci_hcd 0000:00:1d.3: detected 2 ports |
| [ 2.758257] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004060 |
| [ 2.758334] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 |
| [ 2.758336] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.758338] usb usb5: Product: UHCI Host Controller |
| [ 2.758340] usb usb5: Manufacturer: Linux 4.19.0-2-amd64 uhci_hcd |
| [ 2.758342] usb usb5: SerialNumber: 0000:00:1d.3 |
| [ 2.758481] hub 5-0:1.0: USB hub found |
| [ 2.758491] hub 5-0:1.0: 2 ports detected |
| [ 2.762618] pci 0000:00:00.0: Intel 945GM Chipset |
| [ 2.762631] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable |
| [ 2.763633] pci 0000:00:00.0: detected 8192K stolen memory |
| [ 2.763675] [drm] Replacing VGA console driver |
| [ 2.764384] Console: switching to colour dummy device 80x25 |
| [ 2.815103] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 2.815104] [drm] Driver supports precise vblank timestamp query. |
| [ 2.815423] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 2.825360] random: fast init done |
| [ 2.829747] [drm] RC6 disabled, disabling runtime PM support |
| [ 2.829800] [drm] Initialized overlay support. |
| [ 2.830409] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 |
| [ 2.830611] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 2.830927] acpi device:03: registered as cooling_device2 |
| [ 2.831005] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13 |
| [ 2.846303] fbcon: inteldrmfb (fb0) is primary device |
| [ 2.881904] ata1.00: ATA-8: FUJITSU MHW2120BH, 00000012, max UDMA/100 |
| [ 2.881906] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) |
| [ 2.886936] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 0012 PQ: 0 ANSI: 5 |
| [ 2.889866] ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.60, max UDMA/33 |
| [ 2.897180] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.60 PQ: 0 ANSI: 5 |
| [ 2.897200] Console: switching to colour frame buffer device 160x50 |
| [ 2.918267] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 2.942523] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) |
| [ 2.942536] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.942539] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.942556] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.980974] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray |
| [ 2.980977] cdrom: Uniform CD-ROM driver Revision: 3.20 |
| [ 2.981294] sr 1:0:0:0: Attached scsi CD-ROM sr0 |
| [ 3.048936] sda: sda1 sda2 < sda5 > |
| [ 3.049397] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 3.255228] firewire_core 0000:05:05.1: created device fw0: GUID 0040d00100437d35, S400 |
| [ 3.259200] usb 4-1: new full-speed USB device number 2 using uhci_hcd |
| [ 3.448760] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x92a0b1, caps: 0xa04713/0x200000/0x0/0x0, board id: 0, fw id: 50149 |
| [ 3.469206] usb 4-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=19.58 |
| [ 3.469209] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.487172] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12 |
| [ 3.771098] raid6: sse2x1 gen() 2944 MB/s |
| [ 3.839097] raid6: sse2x1 xor() 3382 MB/s |
| [ 3.907106] raid6: sse2x2 gen() 3386 MB/s |
| [ 3.975091] raid6: sse2x2 xor() 4130 MB/s |
| [ 4.043096] raid6: sse2x4 gen() 6120 MB/s |
| [ 4.111093] raid6: sse2x4 xor() 4566 MB/s |
| [ 4.111095] raid6: using algorithm sse2x4 gen() 6120 MB/s |
| [ 4.111096] raid6: .... xor() 4566 MB/s, rmw enabled |
| [ 4.111097] raid6: using ssse3x2 recovery algorithm |
| [ 4.120972] xor: measuring software checksum speed |
| [ 4.159080] prefetch64-sse: 7630.000 MB/sec |
| [ 4.199079] generic_sse: 6779.000 MB/sec |
| [ 4.199081] xor: using function: prefetch64-sse (7630.000 MB/sec) |
| [ 4.295318] Btrfs loaded, crc32c=crc32c-generic |
| [ 4.463123] usb 4-2: new full-speed USB device number 3 using uhci_hcd |
| [ 4.465748] BTRFS: device fsid 749a2872-dfdf-4601-a982-fedcd6f615c4 devid 1 transid 128777 /dev/sda1 |
| [ 4.626624] PM: Image not found (code -22) |
| [ 4.661197] usb 4-2: New USB device found, idVendor=147e, idProduct=2016, bcdDevice= 0.01 |
| [ 4.661200] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.661203] usb 4-2: Product: Fingerprint Sensor |
| [ 4.661205] usb 4-2: Manufacturer: TouchStrip |
| [ 4.706387] BTRFS info (device sda1): disk space caching is enabled |
| [ 5.143121] usb 2-7: new high-speed USB device number 4 using ehci-pci |
| [ 5.300508] usb 2-7: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 7.02 |
| [ 5.300511] usb 2-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
| [ 5.300513] usb 2-7: Product: USB2.0 Hub |
| [ 5.300920] hub 2-7:1.0: USB hub found |
| [ 5.301254] hub 2-7:1.0: 4 ports detected |
| [ 7.105710] systemd[1]: Inserted module 'autofs4' |
| [ 7.265277] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) |
| [ 7.283200] systemd[1]: Detected architecture x86-64. |
| [ 7.307467] systemd[1]: Set hostname to <t-rex>. |
| [ 7.379335] random: crng init done |
| [ 10.207909] systemd[1]: /lib/systemd/system/spice-vdagentd.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/spice-vdagentd/spice-vdagentd.pid → /run/spice-vdagentd/spice-vdagentd.pid; please update the unit file accordingly. |
| [ 10.212664] systemd[1]: Listening on Journal Audit Socket. |
| [ 10.212948] systemd[1]: Listening on Journal Socket. |
| [ 10.215995] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 10.217459] systemd[1]: Mounting Kernel Debug File System... |
| [ 10.217700] systemd[1]: Listening on initctl Compatibility Named Pipe. |
| [ 10.239178] systemd[1]: Listening on Syslog Socket. |
| [ 10.410527] BTRFS info (device sda1): disk space caching is enabled |
| [ 10.704595] RPC: Registered named UNIX socket transport module. |
| [ 10.704597] RPC: Registered udp transport module. |
| [ 10.704598] RPC: Registered tcp transport module. |
| [ 10.704599] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 10.800032] systemd-journald[233]: Received request to flush runtime journal from PID 1 |
| [ 10.958135] lp: driver loaded but no devices found |
| [ 11.064335] ppdev: user-space parallel port driver |
| [ 12.738575] audit: type=1400 audit(1555084949.816:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=275 comm="apparmor_parser" |
| [ 12.738581] audit: type=1400 audit(1555084949.816:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=275 comm="apparmor_parser" |
| [ 12.738585] audit: type=1400 audit(1555084949.816:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=275 comm="apparmor_parser" |
| [ 12.906608] audit: type=1400 audit(1555084949.984:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=276 comm="apparmor_parser" |
| [ 12.994323] audit: type=1400 audit(1555084950.076:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=277 comm="apparmor_parser" |
| [ 13.093670] audit: type=1400 audit(1555084950.172:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=278 comm="apparmor_parser" |
| [ 13.127503] audit: type=1400 audit(1555084950.208:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=273 comm="apparmor_parser" |
| [ 13.127510] audit: type=1400 audit(1555084950.208:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=273 comm="apparmor_parser" |
| [ 13.127513] audit: type=1400 audit(1555084950.208:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=273 comm="apparmor_parser" |
| [ 13.127517] audit: type=1400 audit(1555084950.208:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=273 comm="apparmor_parser" |
| [ 15.186339] battery: ACPI: Battery Slot [BAT0] (battery present) |
| [ 15.227170] ACPI: AC Adapter [AC] (on-line) |
| [ 15.271042] intel_rng: FWH not detected |
| [ 15.311406] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| [ 15.424361] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 15.424416] sr 1:0:0:0: Attached scsi generic sg1 type 5 |
| [ 15.445344] yenta_cardbus 0000:05:05.0: CardBus bridge found [104c:ac48] |
| [ 15.445364] yenta_cardbus 0000:05:05.0: Enabling burst memory read transactions |
| [ 15.445370] yenta_cardbus 0000:05:05.0: Using CSCINT to route CSC interrupts to PCI |
| [ 15.445372] yenta_cardbus 0000:05:05.0: Routing CardBus interrupts to PCI |
| [ 15.445378] yenta_cardbus 0000:05:05.0: TI: mfunc 0x01aa1b22, devctl 0x64 |
| [ 15.486457] input: PC Speaker as /devices/platform/pcspkr/input/input14 |
| [ 15.663401] leds_ss4200: no LED devices found |
| [ 15.687890] yenta_cardbus 0000:05:05.0: ISA IRQ mask 0x0ce8, PCI irq 16 |
| [ 15.687895] yenta_cardbus 0000:05:05.0: Socket status: 30000006 |
| [ 15.687902] yenta_cardbus 0000:05:05.0: pcmcia: parent PCI bridge window: [io 0x1000-0x2fff] |
| [ 15.687905] yenta_cardbus 0000:05:05.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe20fffff] |
| [ 15.687908] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe20fffff: |
| [ 15.687912] excluding 0xe0000000-0xe020ffff 0xe1ef0000-0xe20fffff |
| [ 15.687922] yenta_cardbus 0000:05:05.0: pcmcia: parent PCI bridge window: [mem 0xe2100000-0xe40fffff 64bit pref] |
| [ 15.687925] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe2100000-0xe40fffff: |
| [ 15.687929] excluding 0xe2100000-0xe40fffff |
| [ 15.960157] iTCO_vendor_support: vendor-support=0 |
| [ 16.466393] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 16.466481] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0560) |
| [ 16.466612] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 16.596240] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s |
| [ 16.596242] iwl3945: Copyright(c) 2003-2011 Intel Corporation |
| [ 16.596243] iwl3945: hw_scan is disabled |
| [ 16.650396] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels |
| [ 16.650399] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG |
| [ 17.138564] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' |
| [ 17.390788] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) |
| [ 17.888265] intel_powerclamp: No package C-state available |
| [ 17.919521] intel_powerclamp: No package C-state available |
| [ 18.286831] Bluetooth: Core ver 2.22 |
| [ 18.286869] NET: Registered protocol family 31 |
| [ 18.286870] Bluetooth: HCI device and connection manager initialized |
| [ 18.286878] Bluetooth: HCI socket layer initialized |
| [ 18.286882] Bluetooth: L2CAP socket layer initialized |
| [ 18.286893] Bluetooth: SCO socket layer initialized |
| [ 18.348663] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: |
| [ 18.348673] excluding 0xc4000-0xc7fff 0xf0000-0xfffff |
| [ 18.348720] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: |
| [ 18.348745] clean |
| [ 18.348773] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: |
| [ 18.348798] excluding 0x60000000-0x60ffffff |
| [ 18.354995] snd_hda_codec_realtek hdaudioC0D0: ALC262: SKU not ready 0x411111f0 |
| [ 18.358492] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line |
| [ 18.358496] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) |
| [ 18.358499] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| [ 18.358501] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 18.358503] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 18.358505] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19 |
| [ 18.358508] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x1a |
| [ 18.358511] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 |
| [ 18.521801] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 |
| [ 18.522107] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| [ 18.522188] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| [ 18.522267] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 |
| [ 18.522346] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 |
| [ 18.690011] Adding 4789244k swap on /dev/sda5. Priority:-2 extents:1 across:4789244k FS |
| [ 18.691043] usbcore: registered new interface driver btusb |
| [ 24.363486] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 24.363489] Bluetooth: BNEP filters: protocol multicast |
| [ 24.363495] Bluetooth: BNEP socket layer initialized |
| [ 28.221314] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 28.221968] RTL8211B Gigabit Ethernet r8169-400:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE) |
| [ 28.324179] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 28.337594] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 28.439200] iwl3945 0000:02:00.0: firmware: direct-loading firmware iwlwifi-3945-2.ucode |
| [ 28.439208] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9 |
| [ 28.517116] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 28.600446] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 28.839021] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 32.320585] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 35.697015] wlan0: authenticate with 70:3a:cb:bd:fd:e3 |
| [ 35.701098] wlan0: send auth to 70:3a:cb:bd:fd:e3 (try 1/3) |
| [ 35.702462] wlan0: authenticated |
| [ 35.703712] wlan0: associate with 70:3a:cb:bd:fd:e3 (try 1/3) |
| [ 35.706894] wlan0: RX AssocResp from 70:3a:cb:bd:fd:e3 (capab=0x1011 status=0 aid=3) |
| [ 35.708141] wlan0: associated |
| [ 35.803659] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
| [ 35.804048] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 70:3a:cb:bd:fd:e3 |
| [ 35.804086] iwl3945 0000:02:00.0: Enabling power save might cause firmware crashes |
| [ 35.996793] fuse init (API version 7.27) |
| [ 56.083061] rfkill: input handler disabled |
| [ 59.766770] Bluetooth: RFCOMM TTY layer initialized |
| [ 59.766779] Bluetooth: RFCOMM socket layer initialized |
| [ 59.766786] Bluetooth: RFCOMM ver 1.11 |
| [ 81.511316] PM: suspend entry (deep) |
| [ 81.511320] PM: Syncing filesystems ... done. |
| [ 84.215172] (NULL device *): firmware: direct-loading firmware iwlwifi-3945-2.ucode |
| [ 84.215446] Freezing user space processes ... (elapsed 0.002 seconds) done. |
| [ 84.217669] OOM killer disabled. |
| [ 84.217670] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [ 84.218902] Suspending console(s) (use no_console_suspend to debug) |
| [ 84.219353] wlan0: deauthenticating from 70:3a:cb:bd:fd:e3 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [ 84.239360] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [ 84.239633] sd 0:0:0:0: [sda] Stopping disk |
| [ 84.263392] serial 00:07: disabled |
| [ 84.263751] serial 00:06: disabled |
| [ 84.264105] serial 00:05: disabled |
| [ 84.264458] serial 00:04: disabled |
| [ 85.159603] ACPI: EC: interrupt blocked |
| [ 85.199651] ACPI: Preparing to enter system sleep state S3 |
| [ 86.229271] ACPI: EC: event blocked |
| [ 86.229272] ACPI: EC: EC stopped |
| [ 86.229273] PM: Saving platform NVS memory |
| [ 86.229274] Disabling non-boot CPUs ... |
| [ 86.243566] IRQ 29: no longer affine to CPU1 |
| [ 86.244581] smpboot: CPU 1 is now offline |
| [ 86.247560] ACPI: Low-level resume complete |
| [ 86.247560] ACPI: EC: EC started |
| [ 86.247560] PM: Restoring platform NVS memory |
| [ 86.247560] Enabling non-boot CPUs ... |
| [ 86.247560] x86: Booting SMP configuration: |
| [ 86.247560] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [ 86.248597] cache: parent cpu1 should not be sleeping |
| [ 86.248963] CPU1 is up |
| [ 86.250929] ACPI: Waking up from system sleep state S3 |
| [ 86.251679] ACPI: EC: interrupt unblocked |
| [ 86.292384] usb usb1: root hub lost power or was reset |
| [ 86.292456] usb usb3: root hub lost power or was reset |
| [ 86.292521] usb usb4: root hub lost power or was reset |
| [ 86.292590] usb usb5: root hub lost power or was reset |
| [ 86.294913] sd 0:0:0:0: [sda] Starting disk |
| [ 86.307204] CE: hpet increased min_delta_ns to 20115 nsec |
| [ 86.663152] usb 2-7: reset high-speed USB device number 4 using ehci-pci |
| [ 86.663167] usb 4-2: reset full-speed USB device number 3 using uhci_hcd |
| [ 86.727180] ACPI: EC: event unblocked |
| [ 86.751173] ACPI: button: The lid device is not compliant to SW_LID. |
| [ 86.752172] serial 00:04: activated |
| [ 86.752973] serial 00:05: activated |
| [ 86.753916] serial 00:06: activated |
| [ 86.754857] serial 00:07: activated |
| [ 86.867180] firewire_core 0000:05:05.1: rediscovered device fw0 |
| [ 86.951122] usb 4-1: reset full-speed USB device number 2 using uhci_hcd |
| [ 87.138061] OOM killer enabled. |
| [ 87.138062] Restarting tasks ... done. |
| [ 87.164944] video LNXVIDEO:00: Restoring backlight state |
| [ 87.319585] PM: suspend exit |
| [ 87.438853] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 87.442683] RTL8211B Gigabit Ethernet r8169-400:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE) |
| [ 87.543237] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 87.546544] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 87.673619] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 87.769861] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 87.809264] rfkill: input handler enabled |
| [ 87.846169] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 91.389616] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 94.836998] wlan0: authenticate with 70:3a:cb:bd:fd:e3 |
| [ 94.845713] wlan0: send auth to 70:3a:cb:bd:fd:e3 (try 1/3) |
| [ 94.847313] wlan0: authenticated |
| [ 94.851112] wlan0: associate with 70:3a:cb:bd:fd:e3 (try 1/3) |
| [ 94.853784] wlan0: RX AssocResp from 70:3a:cb:bd:fd:e3 (capab=0x1011 status=0 aid=3) |
| [ 94.854970] wlan0: associated |
| [ 94.870216] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
| [ 94.901481] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 70:3a:cb:bd:fd:e3 |
| [ 95.897620] rfkill: input handler disabled |