[    0.000000] Linux version 4.12.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20170915 (Debian 6.4.0-6) ) #1 SMP Debian 4.12.13-1 (2017-09-19)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.12.0-2-amd64 root=UUID=77460594-bbda-42b7-a1d9-13c1e52e356e ro i8042.nomux=1 i8042.reset quiet iomem=relaxed
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff00fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ff01000-0x000000007fffffff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000829fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027d5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 33476LU/33476LU, BIOS CBET4000 4.6-1718-g22579596ff 10/09/2017
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x27d600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 080000000 mask FC0000000 uncachable
[    0.000000]   1 base 0C0000000 mask FF0000000 uncachable
[    0.000000]   2 base 0D0000000 mask FF0000000 write-combining
[    0.000000]   3 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7ff01 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff8b8f80099000] 99000 size 24576
[    0.000000] BRK [0x27ad54000, 0x27ad54fff] PGTABLE
[    0.000000] BRK [0x27ad55000, 0x27ad55fff] PGTABLE
[    0.000000] BRK [0x27ad56000, 0x27ad56fff] PGTABLE
[    0.000000] BRK [0x27ad57000, 0x27ad57fff] PGTABLE
[    0.000000] BRK [0x27ad58000, 0x27ad58fff] PGTABLE
[    0.000000] BRK [0x27ad59000, 0x27ad59fff] PGTABLE
[    0.000000] BRK [0x27ad5a000, 0x27ad5afff] PGTABLE
[    0.000000] BRK [0x27ad5b000, 0x27ad5bfff] PGTABLE
[    0.000000] BRK [0x27ad5c000, 0x27ad5cfff] PGTABLE
[    0.000000] BRK [0x27ad5d000, 0x27ad5dfff] PGTABLE
[    0.000000] BRK [0x27ad5e000, 0x27ad5efff] PGTABLE
[    0.000000] BRK [0x27ad5f000, 0x27ad5ffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35be1000-0x36de7fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000007FF130E0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007FF16540 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000007FF13280 0032B1 (v03 COREv4 COREBOOT 20141018 INTL 20161222)
[    0.000000] ACPI: FACS 0x000000007FF13240 000040
[    0.000000] ACPI: FACS 0x000000007FF13240 000040
[    0.000000] ACPI: SSDT 0x000000007FF16640 001896 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x000000007FF17EE0 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x000000007FF17F20 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007FF17F60 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DMAR 0x000000007FF17FD0 0000A8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000007FF1A080 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027d5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x27d5fb000-0x27d5fffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027d5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ff00fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027d5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027d5fffff]
[    0.000000] On node 0 totalpages: 2086048
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8125 pages used for memmap
[    0.000000]   DMA32 zone: 519937 pages, LIFO batch:31
[    0.000000]   Normal zone: 24408 pages used for memmap
[    0.000000]   Normal zone: 1562112 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x0000000080a00000-0x00000000829fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ff01000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0x829fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[    0.000000] e820: [mem 0x82a00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 38 pages/cpu @ffff8b91fd200000 s114840 r8192 d32616 u524288
[    0.000000] pcpu-alloc: s114840 r8192 d32616 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2053429
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.12.0-2-amd64 root=UUID=77460594-bbda-42b7-a1d9-13c1e52e356e ro i8042.nomux=1 i8042.reset quiet iomem=relaxed
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8112192K/8344192K available (6485K kernel code, 1145K rwdata, 2908K rodata, 1468K init, 704K bss, 232000K reserved, 0K cma-reserved)
[    0.000000] ftrace: allocating 28157 entries in 110 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1995.509 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.01 BogoMIPS (lpj=7982036)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170303
[    0.010389] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.010440] Security Framework initialized
[    0.010441] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.010447] AppArmor: AppArmor disabled by boot time parameter
[    0.010891] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.013301] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.014398] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.014406] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.014692] CPU: Physical Processor ID: 0
[    0.014693] CPU: Processor Core ID: 0
[    0.014701] mce: CPU supports 7 MCE banks
[    0.014710] CPU0: Thermal monitoring enabled (TM1)
[    0.014721] process: using mwait in idle threads
[    0.014724] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.014725] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.014855] Freeing SMP alternatives memory: 24K
[    0.016074] smpboot: Max logical packages: 2
[    0.016085] DMAR: Host address width 36
[    0.016087] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.016093] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.016094] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.016098] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.016100] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.016101] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.016102] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.016512] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.016513] x2apic enabled
[    0.016519] Switched APIC routing to cluster x2apic.
[    0.016981] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.057514] TSC deadline timer enabled
[    0.057517] smpboot: CPU0: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.057597] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.057622] ... version:                3
[    0.057622] ... bit width:              48
[    0.057623] ... generic registers:      4
[    0.057624] ... value mask:             0000ffffffffffff
[    0.057624] ... max period:             00007fffffffffff
[    0.057625] ... fixed-purpose events:   3
[    0.057625] ... event mask:             000000070000000f
[    0.058209] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.058228] smp: Bringing up secondary CPUs ...
[    0.058332] x86: Booting SMP configuration:
[    0.058333] .... node  #0, CPUs:      #1 #2 #3
[    0.298023] smp: Brought up 1 node, 4 CPUs
[    0.298023] smpboot: Total of 4 processors activated (15967.84 BogoMIPS)
[    0.300137] sched_clock: Marking stable (300000000, 0)->(296104665, 3895335)
[    0.300454] devtmpfs: initialized
[    0.300513] x86/mm: Memory block size: 128MB
[    0.303516] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.303525] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.303580] pinctrl core: initialized pinctrl subsystem
[    0.303699] NET: Registered protocol family 16
[    0.303914] cpuidle: using governor ladder
[    0.303953] cpuidle: using governor menu
[    0.303955] PCCT header not found.
[    0.303991] ACPI: bus type PCI registered
[    0.303993] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.304062] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.304065] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.304073] PCI: Using configuration type 1 for base access
[    0.304123] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.305139] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.305369] ACPI: Added _OSI(Module Device)
[    0.305370] ACPI: Added _OSI(Processor Device)
[    0.305371] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.305372] ACPI: Added _OSI(Processor Aggregator Device)
[    0.305512] ACPI: Executed 1 blocks of module-level executable AML code
[    0.307912] ACPI : EC: EC started
[    0.307913] ACPI : EC: interrupt blocked
[    0.307959] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.307961] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.307962] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.307963] ACPI: Interpreter enabled
[    0.307982] ACPI: (supports S0 S3 S4 S5)
[    0.307983] ACPI: Using IOAPIC for interrupt routing
[    0.308004] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.311881] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.311886] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.311944] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.311955] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.312182] PCI host bridge to bus 0000:00
[    0.312185] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.312186] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.312188] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.312189] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.312190] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.312192] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.312193] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.312194] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.312195] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.312197] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.312198] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.312199] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.312201] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.312202] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.312203] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.312204] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.312206] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window]
[    0.312207] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.312209] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.312217] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.312316] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.312327] pci 0000:00:02.0: reg 0x10: [mem 0xe2800000-0xe2bfffff 64bit]
[    0.312334] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.312339] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.312425] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[    0.312435] pci 0000:00:04.0: reg 0x10: [mem 0xe2d10000-0xe2d17fff 64bit]
[    0.312540] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.312562] pci 0000:00:14.0: reg 0x10: [mem 0xe2d00000-0xe2d0ffff 64bit]
[    0.312637] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.312678] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.312723] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.312742] pci 0000:00:1a.0: reg 0x10: [mem 0xe2d1d000-0xe2d1d3ff]
[    0.312832] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.312873] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.312914] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.312935] pci 0000:00:1b.0: reg 0x10: [mem 0xe2d18000-0xe2d1bfff 64bit]
[    0.313016] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.313061] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.313099] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.313183] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.313262] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.313344] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.313424] pci 0000:00:1c.2: [8086:1e16] type 01 class 0x060400
[    0.313506] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.313594] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.313614] pci 0000:00:1d.0: reg 0x10: [mem 0xe2d1e000-0xe2d1e3ff]
[    0.313703] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.313744] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.313785] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.313961] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.313979] pci 0000:00:1f.2: reg 0x10: [io  0x4060-0x4067]
[    0.313988] pci 0000:00:1f.2: reg 0x14: [io  0x4070-0x4073]
[    0.313997] pci 0000:00:1f.2: reg 0x18: [io  0x4068-0x406f]
[    0.314006] pci 0000:00:1f.2: reg 0x1c: [io  0x4074-0x4077]
[    0.314015] pci 0000:00:1f.2: reg 0x20: [io  0x4040-0x405f]
[    0.314024] pci 0000:00:1f.2: reg 0x24: [mem 0xe2d1c000-0xe2d1c7ff]
[    0.314073] pci 0000:00:1f.2: PME# supported from D3hot
[    0.314142] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.314159] pci 0000:00:1f.3: reg 0x10: [mem 0xe2d1f000-0xe2d1f0ff 64bit]
[    0.314182] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.314394] pci 0000:01:00.0: [10ec:5229] type 00 class 0xff0000
[    0.314487] pci 0000:01:00.0: reg 0x10: [mem 0xe2c00000-0xe2c00fff]
[    0.315008] pci 0000:01:00.0: supports D1 D2
[    0.315009] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.328128] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.328135] pci 0000:00:1c.0:   bridge window [mem 0xe2c00000-0xe2cfffff]
[    0.328241] pci 0000:02:00.0: [168c:0034] type 00 class 0x028000
[    0.328290] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe087ffff 64bit]
[    0.328378] pci 0000:02:00.0: reg 0x30: [mem 0xe0880000-0xe088ffff pref]
[    0.328502] pci 0000:02:00.0: supports D1
[    0.328503] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.344100] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.344104] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.344108] pci 0000:00:1c.1:   bridge window [mem 0xe0000000-0xe08fffff]
[    0.344115] pci 0000:00:1c.1:   bridge window [mem 0xe1800000-0xe1ffffff 64bit pref]
[    0.344201] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.344230] pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.344265] pci 0000:03:00.0: reg 0x18: [mem 0xe1404000-0xe1404fff 64bit pref]
[    0.344287] pci 0000:03:00.0: reg 0x20: [mem 0xe1400000-0xe1403fff 64bit pref]
[    0.344403] pci 0000:03:00.0: supports D1 D2
[    0.344404] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.356109] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.356114] pci 0000:00:1c.2:   bridge window [io  0x1000-0x2fff]
[    0.356118] pci 0000:00:1c.2:   bridge window [mem 0xe2000000-0xe27fffff]
[    0.356124] pci 0000:00:1c.2:   bridge window [mem 0xe0c00000-0xe14fffff 64bit pref]
[    0.356251] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.356307] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.356360] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.356413] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.356464] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.356516] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.356567] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.356618] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.357048] ACPI: Enabled 3 GPEs in block 00 to 3F
[    0.357127] ACPI : EC: interrupt unblocked
[    0.357133] ACPI : EC: event unblocked
[    0.357153] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.357155] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.357237] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.357239] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.357243] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.357243] vgaarb: loaded
[    0.357286] EDAC MC: Ver: 3.0.0
[    0.357453] PCI: Using ACPI for IRQ routing
[    0.359168] PCI: pci_cache_line_size set to 64 bytes
[    0.359255] e820: reserve RAM buffer [mem 0x7ff01000-0x7fffffff]
[    0.359256] e820: reserve RAM buffer [mem 0x27d600000-0x27fffffff]
[    0.359422] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.359428] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.362500] clocksource: Switched to clocksource hpet
[    0.372319] VFS: Disk quotas dquot_6.6.0
[    0.372344] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.372425] pnp: PnP ACPI init
[    0.372520] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.372522] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.372524] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.372525] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.372527] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.372528] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.372530] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.372532] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.372534] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[    0.372535] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[    0.372539] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.372829] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.372832] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.372876] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.372878] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.372880] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.372903] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.372938] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.372965] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.372995] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[    0.373014] pnp: PnP ACPI: found 7 devices
[    0.379460] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.379494] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.379502] pci 0000:00:1c.0:   bridge window [mem 0xe2c00000-0xe2cfffff]
[    0.379512] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.379515] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.379520] pci 0000:00:1c.1:   bridge window [mem 0xe0000000-0xe08fffff]
[    0.379524] pci 0000:00:1c.1:   bridge window [mem 0xe1800000-0xe1ffffff 64bit pref]
[    0.379531] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.379534] pci 0000:00:1c.2:   bridge window [io  0x1000-0x2fff]
[    0.379539] pci 0000:00:1c.2:   bridge window [mem 0xe2000000-0xe27fffff]
[    0.379543] pci 0000:00:1c.2:   bridge window [mem 0xe0c00000-0xe14fffff 64bit pref]
[    0.379551] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.379553] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.379554] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.379555] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.379557] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.379558] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.379559] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.379560] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.379562] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.379563] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.379564] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.379566] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.379567] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.379568] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.379569] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.379571] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.379572] pci_bus 0000:00: resource 20 [mem 0x82a00001-0xefffffff window]
[    0.379573] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[    0.379575] pci_bus 0000:01: resource 1 [mem 0xe2c00000-0xe2cfffff]
[    0.379576] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.379578] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff]
[    0.379579] pci_bus 0000:02: resource 2 [mem 0xe1800000-0xe1ffffff 64bit pref]
[    0.379580] pci_bus 0000:03: resource 0 [io  0x1000-0x2fff]
[    0.379581] pci_bus 0000:03: resource 1 [mem 0xe2000000-0xe27fffff]
[    0.379583] pci_bus 0000:03: resource 2 [mem 0xe0c00000-0xe14fffff 64bit pref]
[    0.379666] NET: Registered protocol family 2
[    0.379842] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.379993] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.380217] TCP: Hash tables configured (established 65536 bind 65536)
[    0.380254] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.380287] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.380358] NET: Registered protocol family 1
[    0.380371] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.383409] PCI: CLS 64 bytes, default 64
[    0.383450] Unpacking initramfs...
[    0.769898] Freeing initrd memory: 18460K
[    0.769963] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.769966] software IO TLB [mem 0x7bf01000-0x7ff01000] (64MB) mapped at [ffff8b8ffbf01000-ffff8b8ffff00fff]
[    0.770371] audit: initializing netlink subsys (disabled)
[    0.770440] audit: type=2000 audit(1507570424.767:1): state=initialized audit_enabled=0 res=1
[    0.770812] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.770860] zbud: loaded
[    1.186223] Key type asymmetric registered
[    1.186224] Asymmetric key parser 'x509' registered
[    1.186238] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.186271] io scheduler noop registered
[    1.186272] io scheduler deadline registered
[    1.186284] io scheduler cfq registered (default)
[    1.186285] io scheduler mq-deadline registered
[    1.186991] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[    1.187013] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
[    1.187032] pcieport 0000:00:1c.2: Signaling PME with IRQ 28
[    1.187055] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.187095] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.187136] efifb: probing for efifb
[    1.187150] efifb: framebuffer at 0xd0000000, using 4160k, total 4160k
[    1.187151] efifb: mode is 1376x768x32, linelength=5504, pages=1
[    1.187151] efifb: scrolling: redraw
[    1.187152] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.189979] Console: switching to colour frame buffer device 172x48
[    1.192692] fb0: EFI VGA frame buffer device
[    1.192700] intel_idle: MWAIT substates: 0x21120
[    1.192701] intel_idle: v0.4.1 model 0x3A
[    1.192861] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.193227] GHES: HEST is not enabled!
[    1.193289] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.193723] Linux agpgart interface v0.103
[    1.206518] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[    1.286745] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.286746] AMD IOMMUv2 functionality not available on this system
[    1.287153] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.298115] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.298121] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.298264] mousedev: PS/2 mouse device common for all mice
[    1.298534] rtc_cmos 00:03: RTC can wake from S4
[    1.298664] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.298696] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.298707] intel_pstate: Intel P-state driver initializing
[    1.299064] ledtrig-cpu: registered to indicate activity on CPUs
[    1.299497] NET: Registered protocol family 10
[    1.300029] Segment Routing with IPv6
[    1.300065] mip6: Mobile IPv6
[    1.300069] NET: Registered protocol family 17
[    1.300073] mpls_gso: MPLS GSO support
[    1.300669] microcode: sig=0x306a9, pf=0x10, revision=0x1b
[    1.300836] microcode: Microcode Update Driver: v2.2.
[    1.301176] registered taskstats version 1
[    1.301212] zswap: loaded using pool lzo/zbud
[    1.317492] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.327498] atkbd serio0: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[    1.327505] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
[    1.459236] rtc_cmos 00:03: setting system clock to 2017-10-09 17:33:46 UTC (1507570426)
[    1.459304] PM: Hibernation image not present or could not be loaded.
[    1.463425] Freeing unused kernel memory: 1468K
[    1.463428] Write protecting the kernel read-only data: 12288k
[    1.464567] Freeing unused kernel memory: 1692K
[    1.471100] Freeing unused kernel memory: 1188K
[    1.472251] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.534758] ACPI: bus type USB registered
[    1.534781] usbcore: registered new interface driver usbfs
[    1.534794] usbcore: registered new interface driver hub
[    1.534817] usbcore: registered new device driver usb
[    1.536065] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.536073] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.536486] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.536921] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.537115] ehci-pci: EHCI PCI platform driver
[    1.537174] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
[    1.537180] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.537294] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.537296] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.537297] usb usb1: Product: xHCI Host Controller
[    1.537298] usb usb1: Manufacturer: Linux 4.12.0-2-amd64 xhci-hcd
[    1.537299] usb usb1: SerialNumber: 0000:00:14.0
[    1.537329] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffb23f40ca5000, 20:1a:06:5c:87:a3, XID 0c900800 IRQ 30
[    1.537332] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.537439] hub 1-0:1.0: USB hub found
[    1.537449] hub 1-0:1.0: 4 ports detected
[    1.537585] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.537588] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.537616] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.537617] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.537618] usb usb2: Product: xHCI Host Controller
[    1.537619] usb usb2: Manufacturer: Linux 4.12.0-2-amd64 xhci-hcd
[    1.537619] usb usb2: SerialNumber: 0000:00:14.0
[    1.537701] hub 2-0:1.0: USB hub found
[    1.537709] hub 2-0:1.0: 4 ports detected
[    1.537947] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.537953] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.537966] ehci-pci 0000:00:1a.0: debug port 2
[    1.539017] SCSI subsystem initialized
[    1.540001] libata version 3.00 loaded.
[    1.541868] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.541891] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe2d1d000
[    1.544880] AVX version of gcm_enc/dec engaged.
[    1.544881] AES CTR mode by8 optimization enabled
[    1.558481] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.558579] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.558581] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.558582] usb usb3: Product: EHCI Host Controller
[    1.558583] usb usb3: Manufacturer: Linux 4.12.0-2-amd64 ehci_hcd
[    1.558584] usb usb3: SerialNumber: 0000:00:1a.0
[    1.558729] hub 3-0:1.0: USB hub found
[    1.558739] hub 3-0:1.0: 3 ports detected
[    1.559027] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.559034] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.559047] ehci-pci 0000:00:1d.0: debug port 2
[    1.562954] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.562978] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe2d1e000
[    1.578517] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.578602] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.578603] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.578604] usb usb4: Product: EHCI Host Controller
[    1.578605] usb usb4: Manufacturer: Linux 4.12.0-2-amd64 ehci_hcd
[    1.578605] usb usb4: SerialNumber: 0000:00:1d.0
[    1.579232] hub 4-0:1.0: USB hub found
[    1.579241] hub 4-0:1.0: 3 ports detected
[    1.579349] ahci 0000:00:1f.2: version 3.0
[    1.579601] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.589741] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.589745] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    1.590611] scsi host0: ahci
[    1.590859] scsi host1: ahci
[    1.591015] scsi host2: ahci
[    1.591141] scsi host3: ahci
[    1.591271] scsi host4: ahci
[    1.591422] scsi host5: ahci
[    1.591505] ata1: SATA max UDMA/133 abar m2048@0xe2d1c000 port 0xe2d1c100 irq 32
[    1.591506] ata2: DUMMY
[    1.591510] ata3: SATA max UDMA/133 abar m2048@0xe2d1c000 port 0xe2d1c200 irq 32
[    1.591511] ata4: DUMMY
[    1.591512] ata5: DUMMY
[    1.591513] ata6: DUMMY
[    1.591764] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.790524] tsc: Refined TSC clocksource calibration: 1995.466 MHz
[    1.790535] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3986e6ba568, max_idle_ns: 881590718426 ns
[    1.888787] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.905880] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.906507] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.906560] ata1.00: ATA-9: WDC WD5000LPVX-22V0TT0, 01.01A01, max UDMA/133
[    1.906565] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.907236] ata1.00: configured for UDMA/133
[    1.907609] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000LPVX-2 1A01 PQ: 0 ANSI: 5
[    2.035004] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[    2.035009] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.035602] hub 3-1:1.0: USB hub found
[    2.035704] hub 3-1:1.0: 6 ports detected
[    2.054871] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[    2.054875] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.055486] hub 4-1:1.0: USB hub found
[    2.055569] hub 4-1:1.0: 8 ports detected
[    2.253361] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.257076] ata3.00: ATA-8: LITEONIT LSS-32L6G-HP, DS51702, max UDMA/133
[    2.257081] ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.257630] ata3.00: configured for UDMA/133
[    2.258119] scsi 2:0:0:0: Direct-Access     ATA      LITEONIT LSS-32L 702  PQ: 0 ANSI: 5
[    2.281360] psmouse serio1: synaptics: queried max coordinates: x [..5744], y [..4790]
[    2.294945] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.294949] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.294979] sd 0:0:0:0: [sda] Write Protect is off
[    2.294983] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.295065] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.295103] sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    2.295128] sd 2:0:0:0: [sdb] Write Protect is off
[    2.295131] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.295173] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.297254]  sdb: sdb1 sdb2 sdb3 sdb5 sdb6 sdb7
[    2.297903] sd 2:0:0:0: [sdb] Attached SCSI disk
[    2.322504] usb 3-1.1: new full-speed USB device number 3 using ehci-pci
[    2.323086] random: fast init done
[    2.341577] psmouse serio1: synaptics: queried min coordinates: x [1198..], y [1062..]
[    2.341582] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[    2.346689] usb 4-1.5: new full-speed USB device number 3 using ehci-pci
[    2.393754]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[    2.395648] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.441070] usb 3-1.1: New USB device found, idVendor=03eb, idProduct=8206
[    2.441078] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.441083] usb 3-1.1: Product: Atmel maXTouch Digitizer
[    2.441100] usb 3-1.1: Manufacturer: Atmel
[    2.445208] hidraw: raw HID events driver (C) Jiri Kosina
[    2.450224] usbcore: registered new interface driver usbhid
[    2.450224] usbhid: USB HID core driver
[    2.450857] hid-generic 0003:03EB:8206.0002: hiddev0,hidraw0: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.1/input1
[    2.451469] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x126c00/0x0, board id: 2253, fw id: 1192539
[    2.451473] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.456785] usb 4-1.5: New USB device found, idVendor=0483, idProduct=91d1
[    2.456788] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.456790] usb 4-1.5: Product: STM32 eMotion2
[    2.456791] usb 4-1.5: Manufacturer: STMicroelectronics
[    2.456793] usb 4-1.5: SerialNumber: STM32 eMotion2
[    2.522503] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
[    2.522602] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.542534] usb 4-1.6: new high-speed USB device number 4 using ehci-pci
[    2.632431] usb 3-1.3: string descriptor 0 read error: -22
[    2.632460] usb 3-1.3: New USB device found, idVendor=0930, idProduct=021c
[    2.632461] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.712900] usb 4-1.6: New USB device found, idVendor=5986, idProduct=0266
[    2.712901] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.712903] usb 4-1.6: Product: Integrated Camera
[    2.712904] usb 4-1.6: Manufacturer: SunplusIT INC.
[    2.815560] clocksource: Switched to clocksource tsc
[    3.162565] PM: Starting manual resume from disk
[    3.162570] PM: Hibernation image partition 8:2 present
[    3.162572] PM: Looking for hibernation image.
[    3.162773] PM: Image not found (code -22)
[    3.162774] PM: Hibernation image not present or could not be loaded.
[    3.269197] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[    3.385849] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.390402] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    3.390556] systemd[1]: Detected architecture x86-64.
[    3.392395] systemd[1]: Set hostname to <universi-lnvx60>.
[    3.450292] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    3.529787] systemd[1]: Created slice System Slice.
[    3.529859] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.529988] systemd[1]: Created slice system-getty.slice.
[    3.530090] systemd[1]: Created slice User and Session Slice.
[    3.530133] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.530690] systemd[1]: Mounting Huge Pages File System...
[    3.530774] systemd[1]: Listening on Syslog Socket.
[    3.546620] EXT4-fs (sdb5): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[    3.556100] RPC: Registered named UNIX socket transport module.
[    3.556101] RPC: Registered udp transport module.
[    3.556102] RPC: Registered tcp transport module.
[    3.556102] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.561863] lp: driver loaded but no devices found
[    3.566982] ppdev: user-space parallel port driver
[    3.572322] loop: module loaded
[    3.716444] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/PNP0C09:00/PNP0C0D:00/input/input4
[    3.716463] ACPI: Lid Switch [LID]
[    3.716516] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    3.716519] ACPI: Power Button [PWRF]
[    3.721727] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.771002] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170303/utaddress-247)
[    3.771009] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.771017] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247)
[    3.771021] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.771021] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247)
[    3.771025] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.771026] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247)
[    3.771029] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.771030] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.775405] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:03EB:8206.0001/input/input6
[    3.775483] hid-multitouch 0003:03EB:8206.0001: input,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.1/input0
[    3.776769] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.777192] media: Linux media interface: v0.10
[    3.779562] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    3.781574] Linux video capture interface: v2.00
[    3.787870] Non-volatile memory driver v1.3
[    3.799149] [drm] Memory usable by graphics device = 2048M
[    3.799152] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[    3.799153] fb: switching to inteldrmfb from EFI VGA
[    3.799196] Console: switching to colour dummy device 80x25
[    3.799287] [drm] Replacing VGA console driver
[    3.800055] Bluetooth: Core ver 2.22
[    3.800066] NET: Registered protocol family 31
[    3.800067] Bluetooth: HCI device and connection manager initialized
[    3.800069] Bluetooth: HCI socket layer initialized
[    3.800071] Bluetooth: L2CAP socket layer initialized
[    3.800077] Bluetooth: SCO socket layer initialized
[    3.805437] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    3.805438] thinkpad_acpi: http://ibm-acpi.sf.net/
[    3.805438] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-1718-g22579596ff, EC GDHTB3WW
[    3.805439] thinkpad_acpi: Lenovo ThinkPad Twist, model 33476LU
[    3.805591] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    3.805759] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    3.805760] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    3.811631] usbcore: registered new interface driver btusb
[    3.814552] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0266)
[    3.815684] usb 3-1.3: firmware: direct-loading firmware ar3k/AthrBT_0x11020000.dfu
[    3.819980] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[    3.822925] uvcvideo 4-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[    3.822928] uvcvideo 4-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[    3.822930] uvcvideo 4-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[    3.822931] uvcvideo 4-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[    3.823004] input: Integrated Camera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input8
[    3.823036] usbcore: registered new interface driver uvcvideo
[    3.823037] USB Video Class driver (1.1.1)
[    3.826816] ath: phy0: ASPM enabled: 0x43
[    3.826818] ath: EEPROM regdomain: 0x6a
[    3.826819] ath: EEPROM indicates we should expect a direct regpair map
[    3.826820] ath: Country alpha2 being used: 00
[    3.826821] ath: Regpair used: 0x6a
[    3.829525] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    3.829875] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffb23f41480000, irq=17
[    3.852808] usb 3-1.3: firmware: direct-loading firmware ar3k/ramps_0x11020000_40.dfu
[    3.856283] usbcore: registered new interface driver ath3k
[    3.858483] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.858484] [drm] Driver supports precise vblank timestamp query.
[    3.858931] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.902763] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
[    3.902939] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.904200] acpi device:03: registered as cooling_device4
[    3.904265] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    3.925229] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    3.925233] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.925235] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[    3.925236] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.925237] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.925239] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    3.925241] snd_hda_codec_realtek hdaudioC0D0:      Dock Mic=0x19
[    3.925242] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    3.963432] input: PC Speaker as /devices/platform/pcspkr/input/input11
[    3.990480] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    3.990482] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    3.990483] RAPL PMU: hw unit of domain package 2^-16 Joules
[    3.990483] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    3.998585] ACPI: Battery Slot [BAT0] (battery present)
[    3.998632] ACPI: Battery Slot [BAT1] (battery absent)
[    3.998689] ACPI: AC Adapter [AC] (on-line)
[    4.000425] thinkpad_acpi: ThinkPad ACPI EC access misbehaving, disabling thermal sensors access
[    4.000432] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    4.000603] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    4.001508] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[    4.051569] intel_rapl: Found RAPL domain package
[    4.051571] intel_rapl: Found RAPL domain core
[    4.051573] intel_rapl: Found RAPL domain uncore
[    4.102937] iTCO_vendor_support: vendor-support=0
[    4.103453] usb 3-1.3: USB disconnect, device number 4
[    4.103799] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    4.103905] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[    4.104135] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.108669] random: crng init done
[    4.195203] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.195225] fbcon: inteldrmfb (fb0) is primary device
[    4.197647] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    4.198388] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    4.198464] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    4.198524] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    4.198582] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    4.198638] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    4.198693] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    4.326414] usb 3-1.3: new full-speed USB device number 5 using ehci-pci
[    4.436107] usb 3-1.3: string descriptor 0 read error: -22
[    4.436114] usb 3-1.3: New USB device found, idVendor=0930, idProduct=021c
[    4.436117] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.942841] Adding 14871548k swap on /dev/sda2.  Priority:-1 extents:1 across:14871548k FS
[    4.965142] Console: switching to colour frame buffer device 172x48
[    4.988842] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.085787] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem
[    5.088025] EXT4-fs (sdb3): mounted filesystem without journal. Opts: user_xattr
[    5.106596] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    5.107381] FAT-fs (sdb2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    5.855861] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: user_xattr
[    5.926240] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    5.931389] systemd-journald[261]: Received request to flush runtime journal from PID 1
[    6.336994] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: user_xattr
[    6.713232] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
[    6.868363] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: user_xattr
[    7.256316] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: user_xattr
[    7.872416] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.872418] Bluetooth: BNEP filters: protocol multicast
[    7.872422] Bluetooth: BNEP socket layer initialized
[    9.831439] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.831624] r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)
[    9.831671] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168e-3.fw failed with error -2
[    9.831674] r8169 0000:03:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
[    9.848495] r8169 0000:03:00.0 eth0: link down
[    9.848567] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.855586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    9.867327] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    9.881282] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   10.084281] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.758565] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.811351] wlan0: authenticate with f8:1a:67:5a:c4:74
[   13.821829] wlan0: send auth to f8:1a:67:5a:c4:74 (try 1/3)
[   13.827009] wlan0: authenticated
[   13.830100] wlan0: associate with f8:1a:67:5a:c4:74 (try 1/3)
[   13.833955] wlan0: RX AssocResp from f8:1a:67:5a:c4:74 (capab=0x431 status=0 aid=2)
[   13.834116] wlan0: associated
[   13.834125] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   13.840042] ath: EEPROM regdomain: 0x809c
[   13.840043] ath: EEPROM indicates we should expect a country code
[   13.840044] ath: doing EEPROM country->regdmn map search
[   13.840045] ath: country maps to regdmn code: 0x52
[   13.840046] ath: Country alpha2 being used: CN
[   13.840046] ath: Regpair used: 0x52
[   13.840047] ath: regdomain 0x809c dynamically updated by country IE
[   17.701768] Bluetooth: RFCOMM TTY layer initialized
[   17.701773] Bluetooth: RFCOMM socket layer initialized
[   17.701778] Bluetooth: RFCOMM ver 1.11
[  205.419521] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[  205.419528] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[  205.422809] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[  205.422816] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.