[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-1-grml-amd64 (team@grml.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-1+grml.1 (2014-11-05)
[    0.000000] Command line: initrd=/boot/grml64small/initrd.img boot=live live-media-path=/live/grml64-small/ bootid=grml64small201411 vga=791 nomce console=tty0 verbose ssh=remote nomodeset radeon.modeset=0 toram=grml64-small.squashfs BOOT_IMAGE=/boot/grml64small/vmlinuz 
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002ed94fff] usable
[    0.000000] BIOS-e820: [mem 0x000000002ed95000-0x000000003effffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: GizmoSphere Gizmo/Gizmo, BIOS 4.6-1233-gf61ffcf 08/25/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x2ed95 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 base 020000000 mask FF8000000 write-back
[    0.000000]   2 base 028000000 mask FFC000000 write-back
[    0.000000]   3 base 02C000000 mask FFE000000 write-back
[    0.000000]   4 base 02E000000 mask FFF000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f6f00-0x000f6f0f] mapped at [ffff8800000f6f00]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
[    0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE
[    0.000000] BRK [0x01afa000, 0x01afafff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x2d200000-0x2d3fffff]
[    0.000000]  [mem 0x2d200000-0x2d3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x2c000000-0x2d1fffff]
[    0.000000]  [mem 0x2c000000-0x2d1fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x2bffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x2bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x2d400000-0x2ed94fff]
[    0.000000]  [mem 0x2d400000-0x2ebfffff] page 2M
[    0.000000]  [mem 0x2ec00000-0x2ed94fff] page 4k
[    0.000000] BRK [0x01afb000, 0x01afbfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x2d5e0000-0x2ed93fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F7110 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000002EDA80E0 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000002EDAA770 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000002EDA8280 0024E9 (v02 GIZSPH COREBOOT 00010001 INTL 20161222)
[    0.000000] ACPI: FACS 0x000000002EDA8240 000040
[    0.000000] ACPI: SSDT 0x000000002EDAA870 00008A (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0x000000002EDAA900 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000002EDAA940 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HEST 0x000000002EDAA9A0 000198 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 0x000000002EDAAB40 00168E (v02 AMD    ALIB     00000001 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x000000002EDAC1D0 00030C (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: VFCT 0x000000002EDAC4E0 00E669 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000002EDBAB50 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000002ed94fff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x2ed94fff]
[    0.000000]   NODE_DATA [mem 0x2d5db000-0x2d5dffff]
[    0.000000]  [ffffea0000000000-ffffea0000bfffff] PMD -> [ffff88002c000000-ffff88002cbfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x2ed94fff]
[    0.000000] On node 0 totalpages: 191795
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 2568 pages used for memmap
[    0.000000]   DMA32 zone: 187797 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x3f000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88002d200000 s85824 r8192 d20672 u1048576
[    0.000000] pcpu-alloc: s85824 r8192 d20672 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 189150
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: initrd=/boot/grml64small/initrd.img boot=live live-media-path=/live/grml64-small/ bootid=grml64small201411 vga=791 nomce console=tty0 verbose ssh=remote nomodeset radeon.modeset=0 toram=grml64-small.squashfs BOOT_IMAGE=/boot/grml64small/vmlinuz 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 718784K/767180K available (5357K kernel code, 947K rwdata, 1928K rodata, 1220K init, 840K bss, 48396K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 999.984 MHz processor
[    0.000076] Calibrating delay loop (skipped), value calculated using timer frequency.. 1999.96 BogoMIPS (lpj=3999936)
[    0.000094] pid_max: default: 32768 minimum: 301
[    0.000127] ACPI: Core revision 20140424
[    0.009978] ACPI: All ACPI Tables successfully acquired
[    0.010088] Security Framework initialized
[    0.010117] AppArmor: AppArmor disabled by boot time parameter
[    0.010126] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.010356] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.011227] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.011709] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.011736] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.012489] Initializing cgroup subsys memory
[    0.012522] Initializing cgroup subsys devices
[    0.012553] Initializing cgroup subsys freezer
[    0.012567] Initializing cgroup subsys net_cls
[    0.012588] Initializing cgroup subsys blkio
[    0.012606] Initializing cgroup subsys perf_event
[    0.012618] Initializing cgroup subsys net_prio
[    0.012696] tseg: 0000000000
[    0.012712] CPU: Physical Processor ID: 0
[    0.012720] CPU: Processor Core ID: 0
[    0.012734] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
[    0.012998] Freeing SMP alternatives memory: 20K (ffffffff81a1f000 - ffffffff81a24000)
[    0.016313] ftrace: allocating 22111 entries in 87 pages
[    0.042886] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.082601] smpboot: CPU0: AMD G-T40E Processor (fam: 14, model: 02, stepping: 00)
[    0.188259] Performance Events: AMD PMU driver.
[    0.188276] ... version:                0
[    0.188282] ... bit width:              48
[    0.188288] ... generic registers:      4
[    0.188295] ... value mask:             0000ffffffffffff
[    0.188302] ... max period:             00007fffffffffff
[    0.188309] ... fixed-purpose events:   0
[    0.188315] ... event mask:             000000000000000f
[    0.193088] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.193480] x86: Booting SMP configuration:
[    0.193493] .... node  #0, CPUs:      #1
[    0.206684] x86: Booted up 1 node, 2 CPUs
[    0.206697] smpboot: Total of 2 processors activated (3999.93 BogoMIPS)
[    0.207741] devtmpfs: initialized
[    0.220983] pinctrl core: initialized pinctrl subsystem
[    0.221319] NET: Registered protocol family 16
[    0.221777] cpuidle: using governor ladder
[    0.221790] cpuidle: using governor menu
[    0.222123] ACPI: bus type PCI registered
[    0.222135] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.222500] PCI: Using configuration type 1 for base access
[    0.222509] PCI: Using configuration type 1 for extended access
[    0.238628] ACPI: Added _OSI(Module Device)
[    0.238649] ACPI: Added _OSI(Processor Device)
[    0.238657] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.238665] ACPI: Added _OSI(Processor Aggregator Device)
[    0.241918] ACPI: Executed 3 blocks of module-level executable AML code
[    0.248746] ACPI: Interpreter enabled
[    0.248782] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.248803] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.248841] ACPI: (supports S0 S1 S4 S5)
[    0.248850] ACPI: Using IOAPIC for interrupt routing
[    0.248911] HEST: Table parsing has been initialized.
[    0.248926] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.266761] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.266795] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.267045] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.267878] PCI host bridge to bus 0000:00
[    0.267894] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.267905] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.267916] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.267927] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.267938] pci_bus 0000:00: root bus resource [mem 0x3f000000-0xffffffff]
[    0.267963] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[    0.268251] pci 0000:00:01.0: [1002:9804] type 00 class 0x030000
[    0.268277] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.268291] pci 0000:00:01.0: reg 0x14: [io  0x2000-0x20ff]
[    0.268306] pci 0000:00:01.0: reg 0x18: [mem 0xf0200000-0xf023ffff]
[    0.268390] pci 0000:00:01.0: supports D1 D2
[    0.268521] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.268720] pci 0000:00:05.0: [1022:1513] type 01 class 0x060400
[    0.268826] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.268962] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.269173] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.269205] pci 0000:00:11.0: reg 0x10: [io  0x2410-0x2417]
[    0.269222] pci 0000:00:11.0: reg 0x14: [io  0x2420-0x2423]
[    0.269239] pci 0000:00:11.0: reg 0x18: [io  0x2418-0x241f]
[    0.269256] pci 0000:00:11.0: reg 0x1c: [io  0x2424-0x2427]
[    0.269273] pci 0000:00:11.0: reg 0x20: [io  0x2400-0x240f]
[    0.269290] pci 0000:00:11.0: reg 0x24: [mem 0xf0246000-0xf02463ff]
[    0.269592] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.269617] pci 0000:00:12.0: reg 0x10: [mem 0xf0244000-0xf0244fff]
[    0.269814] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.270007] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.270039] pci 0000:00:12.2: reg 0x10: [mem 0xf0247000-0xf02470ff]
[    0.270158] pci 0000:00:12.2: supports D1 D2
[    0.270164] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.270297] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.270485] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.270509] pci 0000:00:13.0: reg 0x10: [mem 0xf0245000-0xf0245fff]
[    0.270723] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.270913] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.270945] pci 0000:00:13.2: reg 0x10: [mem 0xf0248000-0xf02480ff]
[    0.271064] pci 0000:00:13.2: supports D1 D2
[    0.271069] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.271199] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.271386] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.271747] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.271783] pci 0000:00:14.2: reg 0x10: [mem 0xf0240000-0xf0243fff 64bit]
[    0.271880] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.272148] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.272505] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.272677] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.272878] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    0.273000] pci 0000:00:15.0: supports D1 D2
[    0.273136] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.273281] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[    0.273403] pci 0000:00:15.1: supports D1 D2
[    0.273544] pci 0000:00:15.1: System wakeup disabled by ACPI
[    0.273731] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
[    0.273853] pci 0000:00:15.2: supports D1 D2
[    0.273988] pci 0000:00:15.2: System wakeup disabled by ACPI
[    0.274140] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
[    0.274261] pci 0000:00:15.3: supports D1 D2
[    0.274397] pci 0000:00:15.3: System wakeup disabled by ACPI
[    0.274592] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[    0.274864] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[    0.275117] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[    0.275372] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[    0.275651] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[    0.275903] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[    0.276158] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[    0.276411] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[    0.276863] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.276893] pci 0000:01:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.276931] pci 0000:01:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.276957] pci 0000:01:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.276975] pci 0000:01:00.0: reg 0x30: [mem 0xf0100000-0xf010ffff pref]
[    0.277077] pci 0000:01:00.0: supports D1 D2
[    0.277083] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.286934] pci 0000:00:05.0: PCI bridge to [bus 01]
[    0.286967] pci 0000:00:05.0:   bridge window [io  0x1000-0x1fff]
[    0.286977] pci 0000:00:05.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.286989] pci 0000:00:05.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.287254] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[    0.287278] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.287285] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.287292] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.287300] pci 0000:00:14.4:   bridge window [mem 0x3f000000-0xffffffff] (subtractive decode)
[    0.287461] pci 0000:00:15.0: PCI bridge to [bus 03]
[    0.287630] pci 0000:00:15.1: PCI bridge to [bus 04]
[    0.287809] pci 0000:00:15.2: PCI bridge to [bus 05]
[    0.287979] pci 0000:00:15.3: PCI bridge to [bus 06]
[    0.289189] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.289386] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.289575] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.289761] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.289947] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.290118] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
[    0.290295] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.290480] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.290949] ACPI: Enabled 6 GPEs in block 00 to 1F
[    0.291523] vgaarb: setting as boot device: PCI:0000:00:01.0
[    0.291546] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.291569] vgaarb: loaded
[    0.291576] vgaarb: bridge control possible 0000:00:01.0
[    0.291810] PCI: Using ACPI for IRQ routing
[    0.291822] PCI: pci_cache_line_size set to 64 bytes
[    0.291972] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.291983] e820: reserve RAM buffer [mem 0x2ed95000-0x2fffffff]
[    0.292513] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.292532] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.294663] Switched to clocksource hpet
[    0.311484] pnp: PnP ACPI init
[    0.311554] ACPI: bus type PNP registered
[    0.312112] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.312473] pnp: PnP ACPI: found 1 devices
[    0.312482] ACPI: bus type PNP unregistered
[    0.328034] pci 0000:00:05.0: PCI bridge to [bus 01]
[    0.328061] pci 0000:00:05.0:   bridge window [io  0x1000-0x1fff]
[    0.328076] pci 0000:00:05.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.328091] pci 0000:00:05.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.328108] pci 0000:00:14.4: PCI bridge to [bus 02]
[    0.328132] pci 0000:00:15.0: PCI bridge to [bus 03]
[    0.328154] pci 0000:00:15.1: PCI bridge to [bus 04]
[    0.328177] pci 0000:00:15.2: PCI bridge to [bus 05]
[    0.328199] pci 0000:00:15.3: PCI bridge to [bus 06]
[    0.328224] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.328231] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.328238] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.328244] pci_bus 0000:00: resource 7 [mem 0x3f000000-0xffffffff]
[    0.328251] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.328257] pci_bus 0000:01: resource 1 [mem 0xf0100000-0xf01fffff]
[    0.328264] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.328271] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.328277] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.328283] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.328290] pci_bus 0000:02: resource 7 [mem 0x3f000000-0xffffffff]
[    0.328452] NET: Registered protocol family 2
[    0.329221] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.329309] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.329403] TCP: Hash tables configured (established 8192 bind 8192)
[    0.329513] TCP: reno registered
[    0.329533] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.329559] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.329832] NET: Registered protocol family 1
[    0.329890] pci 0000:00:01.0: Video device with shadowed ROM
[    0.332609] PCI: CLS 64 bytes, default 64
[    0.332773] Unpacking initramfs...
[    8.614057] Freeing initrd memory: 24272K (ffff88002d5e0000 - ffff88002ed94000)
[    8.615078] microcode: CPU0: patch_level=0x05000119
[    8.615115] microcode: CPU1: patch_level=0x05000119
[    8.615476] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    8.615515] LVT offset 0 assigned for vector 0x400
[    8.615635] perf: AMD IBS detected (0x000000ff)
[    8.615732] Scanning for low memory corruption every 60 seconds
[    8.616895] futex hash table entries: 512 (order: 3, 32768 bytes)
[    8.617048] audit: initializing netlink subsys (disabled)
[    8.617112] audit: type=2000 audit(1503622815.500:1): initialized
[    8.618247] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    8.618356] zbud: loaded
[    8.619184] VFS: Disk quotas dquot_6.5.2
[    8.619295] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    8.619413] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    8.619678] aufs 3.16-20140908
[    8.619702] msgmni has been set to 1451
[    8.621141] alg: No test for stdrng (krng)
[    8.621274] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    8.621440] io scheduler noop registered
[    8.621457] io scheduler deadline registered
[    8.621583] io scheduler cfq registered (default)
[    8.621817] pcieport 0000:00:05.0: device [1022:1513] has invalid IRQ; check vendor BIOS
[    8.622246] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
[    8.622814] pcieport 0000:00:15.0: irq 41 for MSI/MSI-X
[    8.623279] pcieport 0000:00:15.1: irq 42 for MSI/MSI-X
[    8.623734] pcieport 0000:00:15.2: irq 43 for MSI/MSI-X
[    8.624197] pcieport 0000:00:15.3: irq 44 for MSI/MSI-X
[    8.624457] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[    8.624470] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    8.624484] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[    8.624577] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[    8.624592] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[    8.624639] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[    8.624654] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[    8.624703] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
[    8.624719] pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
[    8.624767] pcieport 0000:00:15.3: Signaling PME through PCIe PME interrupt
[    8.624782] pcie_pme 0000:00:15.3:pcie01: service driver pcie_pme loaded
[    8.624840] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    8.624908] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    8.625094] simple-framebuffer simple-framebuffer.0: framebuffer at 0xe0000000, 0x180000 bytes, mapped to 0xffffc90000200000
[    8.625111] simple-framebuffer simple-framebuffer.0: format=r5g6b5, mode=1024x768x16, linelength=2048
[    8.629772] Console: switching to colour frame buffer device 128x48
[    8.634068] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    8.634310] GHES: Failed to enable APEI firmware first mode.
[    8.634857] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    8.637435] Linux agpgart interface v0.103
[    8.637837] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    9.929112] i8042: No controller found
[    9.929200] tsc: Refined TSC clocksource calibration: 999.999 MHz
[    9.929796] mousedev: PS/2 mouse device common for all mice
[    9.930067] rtc_cmos 00:00: RTC can wake from S4
[    9.930391] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    9.930513] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[    9.930619] ledtrig-cpu: registered to indicate activity on CPUs
[    9.930962] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    9.931024] AMD IOMMUv2 functionality not available on this system
[    9.931350] TCP: cubic registered
[    9.931531] NET: Registered protocol family 10
[    9.932204] mip6: Mobile IPv6
[    9.932250] NET: Registered protocol family 17
[    9.932308] mpls_gso: MPLS GSO support
[    9.934139] mce: Unable to init device /dev/mcelog (rc: -5)
[    9.936887] registered taskstats version 1
[    9.939865] rtc_cmos 00:00: setting system clock to 2017-08-25 01:00:17 UTC (1503622817)
[    9.941883] PM: Hibernation image not present or could not be loaded.
[    9.945533] Freeing unused kernel memory: 1220K (ffffffff818ee000 - ffffffff81a1f000)
[    9.947559] Write protecting the kernel read-only data: 8192k
[    9.956482] Freeing unused kernel memory: 776K (ffff88000153e000 - ffff880001600000)
[    9.959698] Freeing unused kernel memory: 120K (ffff8800017e2000 - ffff880001800000)
[   10.051742] systemd-udevd[66]: starting version 215
[   10.054890] random: systemd-udevd urandom read with 2 bits of entropy available
[   10.084851] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[   10.093545] ACPI: Power Button [PWRB]
[   10.096013] [drm] Initialized drm 1.1.0 20060810
[   10.099637] SCSI subsystem initialized
[   10.101837] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[   10.108031] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   10.110301] r8169 0000:01:00.0: irq 45 for MSI/MSI-X
[   10.110640] ACPI: bus type USB registered
[   10.110965] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xffffc9000019a000, 98:73:c4:f0:02:8f, XID 081000c0 IRQ 45
[   10.110969] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   10.117878] ACPI: Power Button [PWRF]
[   10.127214] thermal LNXTHERM:00: registered as thermal_zone0
[   10.129186] ACPI: Thermal Zone [TZ00] (43 C)
[   10.134868] usbcore: registered new interface driver usbfs
[   10.136862] usbcore: registered new interface driver hub
[   10.142450] libata version 3.00 loaded.
[   10.145101] ahci 0000:00:11.0: version 3.0
[   10.145797] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[   10.147874] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part 
[   10.149949] usbcore: registered new device driver usb
[   10.153474] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   10.156173] ehci-pci: EHCI PCI platform driver
[   10.158414] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   10.161577] [drm:radeon_init] *ERROR* No UMS support in radeon module!
[   10.166311] scsi0 : ahci
[   10.168739] scsi1 : ahci
[   10.170932] scsi2 : ahci
[   10.173024] scsi3 : ahci
[   10.175155] scsi4 : ahci
[   10.177169] scsi5 : ahci
[   10.179119] ata1: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246100 irq 19
[   10.180916] ata2: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246180 irq 19
[   10.182701] ata3: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246200 irq 19
[   10.184469] ata4: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246280 irq 19
[   10.186240] ata5: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246300 irq 19
[   10.187932] ata6: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246380 irq 19
[   10.191434] QUIRK: Enable AMD PLL fix
[   10.191491] ehci-pci 0000:00:12.2: EHCI Host Controller
[   10.193276] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[   10.195661] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[   10.197495] ehci-pci 0000:00:12.2: debug port 1
[   10.199930] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0247000
[   10.210775] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[   10.212704] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   10.214396] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.216094] usb usb1: Product: EHCI Host Controller
[   10.217759] usb usb1: Manufacturer: Linux 3.16.0-1-grml-amd64 ehci_hcd
[   10.219445] usb usb1: SerialNumber: 0000:00:12.2
[   10.221633] hub 1-0:1.0: USB hub found
[   10.223774] hub 1-0:1.0: 5 ports detected
[   10.227822] ehci-pci 0000:00:13.2: EHCI Host Controller
[   10.229463] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[   10.232066] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[   10.233716] ehci-pci 0000:00:13.2: debug port 1
[   10.235724] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0248000
[   10.246779] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[   10.248487] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   10.249980] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.251530] usb usb2: Product: EHCI Host Controller
[   10.253001] usb usb2: Manufacturer: Linux 3.16.0-1-grml-amd64 ehci_hcd
[   10.254482] usb usb2: SerialNumber: 0000:00:13.2
[   10.256559] hub 2-0:1.0: USB hub found
[   10.258051] hub 2-0:1.0: 5 ports detected
[   10.260850] ohci-pci: OHCI PCI platform driver
[   10.262893] ohci-pci 0000:00:12.0: OHCI PCI host controller
[   10.264342] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[   10.265909] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0244000
[   10.327046] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[   10.328525] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.329935] usb usb3: Product: OHCI PCI host controller
[   10.331423] usb usb3: Manufacturer: Linux 3.16.0-1-grml-amd64 ohci_hcd
[   10.332891] usb usb3: SerialNumber: 0000:00:12.0
[   10.335080] hub 3-0:1.0: USB hub found
[   10.336720] hub 3-0:1.0: 5 ports detected
[   10.339100] ohci-pci 0000:00:13.0: OHCI PCI host controller
[   10.340632] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[   10.342297] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0245000
[   10.403093] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[   10.404779] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.406422] usb usb4: Product: OHCI PCI host controller
[   10.408109] usb usb4: Manufacturer: Linux 3.16.0-1-grml-amd64 ohci_hcd
[   10.409765] usb usb4: SerialNumber: 0000:00:13.0
[   10.411939] hub 4-0:1.0: USB hub found
[   10.413631] hub 4-0:1.0: 5 ports detected
[   10.506960] ata1: SATA link down (SStatus 0 SControl 300)
[   10.518938] ata5: SATA link down (SStatus 0 SControl 300)
[   10.520700] ata4: SATA link down (SStatus 0 SControl 300)
[   10.522426] ata2: SATA link down (SStatus 0 SControl 300)
[   10.524025] ata3: SATA link down (SStatus 0 SControl 300)
[   10.526853] ata6: SATA link down (SStatus 0 SControl 300)
[   10.538930] usb 1-4: new high-speed USB device number 2 using ehci-pci
[   10.563381] device-mapper: uevent: version 1.0.3
[   10.565269] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[   10.672522] usb 1-4: New USB device found, idVendor=0457, idProduct=0151
[   10.674217] usb 1-4: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[   10.675931] usb 1-4: Product: USB Mass Storage Device
[   10.677611] usb 1-4: SerialNumber: 9875c6f37f77ae
[   10.684622] usb-storage 1-4:1.0: USB Mass Storage device detected
[   10.686884] usb-storage 1-4:1.0: Quirks match for vid 0457 pid 0151: 80
[   10.688947] scsi6 : usb-storage 1-4:1.0
[   10.691005] usbcore: registered new interface driver usb-storage
[   10.927182] Switched to clocksource tsc
[   11.693397] scsi 6:0:0:0: Direct-Access     JetFlash TS4GJF2A/120     0.00 PQ: 0 ANSI: 2
[   11.740424] sd 6:0:0:0: [sda] 8028160 512-byte logical blocks: (4.11 GB/3.82 GiB)
[   11.743726] sd 6:0:0:0: [sda] Write Protect is off
[   11.745533] sd 6:0:0:0: [sda] Mode Sense: 00 00 00 00
[   11.747105] sd 6:0:0:0: [sda] Asking for cache data failed
[   11.748900] sd 6:0:0:0: [sda] Assuming drive cache: write through
[   11.756150]  sda: sda1
[   11.761516] sd 6:0:0:0: [sda] Attached SCSI removable disk
[   11.764981] sd 6:0:0:0: Attached scsi generic sg0 type 0
[   12.933044] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   14.238468] random: nonblocking pool is initialized
[   29.022528] loop: module loaded
[   29.068562]  loop0: unknown partition table
[   29.397524] [drm:radeon_init] *ERROR* No UMS support in radeon module!
[   29.841453] [drm:radeon_init] *ERROR* No UMS support in radeon module!
[   32.095045] FS-Cache: Loaded
[   32.116092] 9pnet: Installing 9P2000 support
[   32.132200] 9p: Installing v9fs 9p2000 file system support
[   32.134434] FS-Cache: Netfs '9p' registered for caching
[   36.708564] systemd-udevd[613]: starting version 215
[   37.311428] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   37.313836] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[   37.364696] ACPI: acpi_idle registered with cpuidle
[   37.395899] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   37.421600] acpi-cpufreq: overriding BIOS provided _PSD data
[   37.447202] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   37.449636] sp5100_tco: PCI Revision ID: 0x42
[   37.451994] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[   37.454276] sp5100_tco: Last reboot was not triggered by watchdog.
[   37.456627] sp5100_tco: initialized (0xffffc900001fcb00). heartbeat=60 sec (nowayout=0)
[   37.549230] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   38.055388] sound hdaudioC0D0: ALC272: SKU not ready 0x40100000
[   38.058603] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:line
[   38.061534] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   38.064391] sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   38.067232] sound hdaudioC0D0:    mono: mono_out=0x0
[   38.070024] sound hdaudioC0D0:    inputs:
[   38.135885] sound hdaudioC0D0:      Mic=0x18
[   38.138724] sound hdaudioC0D0:      Line=0x1b
[   38.206987] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/hdaudioC0D0/input3
[   38.209852] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[   38.212286] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[   38.216962] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[   38.303312] kvm: Nested Virtualization enabled
[   38.305486] kvm: Nested Paging enabled
[   38.555256] [drm:radeon_init] *ERROR* No UMS support in radeon module!
[   42.092083] r8169 0000:01:00.0 eth0: link down
[   42.094278] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   42.094560] r8169 0000:01:00.0 eth0: link down
[   42.501320] RPC: Registered named UNIX socket transport module.
[   42.503997] RPC: Registered udp transport module.
[   42.506586] RPC: Registered tcp transport module.
[   42.509141] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   42.577869] FS-Cache: Netfs 'nfs' registered for caching
[   42.701342] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   44.157621] r8169 0000:01:00.0 eth0: link up
[   44.159716] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   48.835810] fuse init (API version 7.23)
[   48.910028] ipmi message handler version 39.2