[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-32-generic (buildd@roseapple) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:12 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001f6d1fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001f6d2000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Intel D945GCLF/D945GCLF, BIOS 4.0-6474-g16e3abf 08/10/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1f6d2 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-through
[    0.000000]   D0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 0E0000000 write-back
[    0.000000]   1 base 01F800000 mask 0FF800000 uncachable
[    0.000000]   2 base 0C0000000 mask 0E0000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f5850-0x000f585f] mapped at [c00f5850]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x1e000000-0x1e1fffff]
[    0.000000]  [mem 0x1e000000-0x1e1fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x1c000000-0x1dffffff]
[    0.000000]  [mem 0x1c000000-0x1dffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x1e200000-0x1f6d1fff]
[    0.000000]  [mem 0x1e200000-0x1f5fffff] page 2M
[    0.000000]  [mem 0x1f600000-0x1f6d1fff] page 4k
[    0.000000] BRK [0x01b8e000, 0x01b8efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x1e374000-0x1f6d1fff]
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 502MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1f6d2000
[    0.000000]   low ram: 0 - 1f6d2000
[    0.000000] BRK [0x01b8f000, 0x01b8ffff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x1f6d1fff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x1f6d1fff]
[    0.000000] On node 0 totalpages: 128624
[    0.000000] free_area_init_node: node 0, pgdat c1997200, node_mem_map ddf84020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 974 pages used for memmap
[    0.000000]   Normal zone: 124626 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000] MPTABLE: OEM ID: Intel   
[    0.000000] MPTABLE: Product ID: D945GCLF    
[    0.000000] MPTABLE: APIC at: 0xFEE00000
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] Processor #1
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] Processors: 2
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x20000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @ddf64000 s36096 r0 d21248 u57344
[    0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 127618
[    0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash --  acpi=off nomodeset debian-installer/language=de keyboard-configuration/layoutcode?=de
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 1029768 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 477180K/514496K available (6528K kernel code, 639K rwdata, 2760K rodata, 872K init, 924K bss, 37316K reserved, 0K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xdfed2000 - 0xffbfe000   ( 509 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf6d2000   ( 502 MB)
[    0.000000]       .init : 0xc19b4000 - 0xc1a8e000   ( 872 kB)
[    0.000000]       .data : 0xc1660532 - 0xc19b3e80   (3406 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1660532   (6529 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=dd808000 soft=dd80a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1599.867 MHz processor
[    0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.73 BogoMIPS (lpj=6399468)
[    0.004016] pid_max: default: 32768 minimum: 301
[    0.004120] Security Framework initialized
[    0.004169] AppArmor: AppArmor initialized
[    0.004174] Yama: becoming mindful.
[    0.004305] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.004312] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.004871] Initializing cgroup subsys memory
[    0.004893] Initializing cgroup subsys devices
[    0.004899] Initializing cgroup subsys freezer
[    0.004906] Initializing cgroup subsys blkio
[    0.004911] Initializing cgroup subsys perf_event
[    0.004919] Initializing cgroup subsys hugetlb
[    0.004977] Disabled fast string operations
[    0.004988] CPU: Physical Processor ID: 0
[    0.004992] CPU: Processor Core ID: 0
[    0.004999] mce: CPU supports 5 MCE banks
[    0.005019] CPU0: Thermal monitoring enabled (TM2)
[    0.005049] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.005049] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
[    0.005049] tlb_flushall_shift: 6
[    0.005544] Freeing SMP alternatives memory: 32K (c1a8e000 - c1a96000)
[    0.008497] ftrace: allocating 27783 entries in 55 pages
[    0.028276] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.028378] ExtINT not setup in hardware but reported by MP table
[    0.028828] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.071329] smpboot: CPU0: Intel(R) Atom(TM) CPU  230   @ 1.60GHz (fam: 06, model: 1c, stepping: 02)
[    0.176058] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
[    0.176080] ... version:                3
[    0.176084] ... bit width:              40
[    0.176088] ... generic registers:      2
[    0.176092] ... value mask:             000000ffffffffff
[    0.176096] ... max period:             000000007fffffff
[    0.176099] ... fixed-purpose events:   3
[    0.176103] ... event mask:             0000000700000003
[    0.181172] CPU 1 irqstacks, hard=dd8ca000 soft=dd8cc000
[    0.181181] x86: Booting SMP configuration:
[    0.008000] Initializing CPU#1
[    0.008000] Disabled fast string operations
[    0.181186] .... node  #0, CPUs:      #1
[    0.196158] x86: Booted up 1 node, 2 CPUs
[    0.196171] smpboot: Total of 2 processors activated (6399.46 BogoMIPS)
[    0.196394] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.197374] devtmpfs: initialized
[    0.197374] EVM: security.selinux
[    0.197374] EVM: security.SMACK64
[    0.197374] EVM: security.ima
[    0.197374] EVM: security.capability
[    0.203046] pinctrl core: initialized pinctrl subsystem
[    0.203309] regulator-dummy: no parameters
[    0.203379] RTC time:  3:34:36, date: 22/05/20
[    0.203500] NET: Registered protocol family 16
[    0.204106] EISA bus registered
[    0.204114] cpuidle: using governor ladder
[    0.204121] cpuidle: using governor menu
[    0.204685] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.204699] PCI: PCI BIOS revision 2.10 entry at 0xfd38b, last bus=4
[    0.204703] PCI: Using configuration type 1 for base access
[    0.208478] bio: create slab <bio-0> at 0
[    0.208478] ACPI: Interpreter disabled.
[    0.208478] vgaarb: loaded
[    0.208712] SCSI subsystem initialized
[    0.208818] libata version 3.00 loaded.
[    0.208818] usbcore: registered new interface driver usbfs
[    0.208818] usbcore: registered new interface driver hub
[    0.208818] usbcore: registered new device driver usb
[    0.208818] PCI: Probing PCI hardware
[    0.208818] PCI: root bus 00: using default resources
[    0.208818] PCI: Probing PCI hardware (bus 00)
[    0.208818] PCI host bridge to bus 0000:00
[    0.208818] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.208818] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.208818] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.208818] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[    0.208818] pci 0000:00:02.0: [8086:2772] type 00 class 0x030000
[    0.208818] pci 0000:00:02.0: reg 0x10: [mem 0xe0200000-0xe027ffff]
[    0.208818] pci 0000:00:02.0: reg 0x14: [io  0x2080-0x2087]
[    0.208818] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff pref]
[    0.208818] pci 0000:00:02.0: reg 0x1c: [mem 0xe0280000-0xe02fffff]
[    0.208818] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.208818] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.208818] pci 0000:00:1b.0: reg 0x10: [mem 0xe0300000-0xe0303fff 64bit]
[    0.208818] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.208833] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.208953] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.209075] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.212117] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.212232] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.212342] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.212470] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.212536] pci 0000:00:1d.0: reg 0x20: [io  0x2000-0x201f]
[    0.212659] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.212724] pci 0000:00:1d.1: reg 0x20: [io  0x2020-0x203f]
[    0.212842] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.212907] pci 0000:00:1d.3: reg 0x20: [io  0x2040-0x205f]
[    0.213043] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.213075] pci 0000:00:1d.7: reg 0x10: [mem 0xe0304000-0xe03043ff]
[    0.213196] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.213307] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.213478] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.213629] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.213651] pci 0000:00:1f.0: quirk: [io  0x0500-0x057f] claimed by ICH6 ACPI/GPIO/TCO
[    0.213662] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.213671] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[    0.213810] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.213837] pci 0000:00:1f.1: reg 0x10: [io  0x2088-0x208f]
[    0.213854] pci 0000:00:1f.1: reg 0x14: [io  0x20a8-0x20ab]
[    0.213871] pci 0000:00:1f.1: reg 0x18: [io  0x2090-0x2097]
[    0.213888] pci 0000:00:1f.1: reg 0x1c: [io  0x20ac-0x20af]
[    0.213905] pci 0000:00:1f.1: reg 0x20: [io  0x2060-0x206f]
[    0.214033] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x010180
[    0.214061] pci 0000:00:1f.2: reg 0x10: [io  0x2098-0x209f]
[    0.214078] pci 0000:00:1f.2: reg 0x14: [io  0x20b0-0x20b3]
[    0.214095] pci 0000:00:1f.2: reg 0x18: [io  0x20a0-0x20a7]
[    0.214112] pci 0000:00:1f.2: reg 0x1c: [io  0x20b4-0x20b7]
[    0.214129] pci 0000:00:1f.2: reg 0x20: [io  0x2070-0x207f]
[    0.214193] pci 0000:00:1f.2: PME# supported from D3hot
[    0.214296] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.214378] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.214637] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
[    0.214666] pci 0000:01:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.214712] pci 0000:01:00.0: reg 0x18: [mem 0xe0120000-0xe0120fff 64bit]
[    0.214742] pci 0000:01:00.0: reg 0x20: [mem 0xe0000000-0xe000ffff 64bit pref]
[    0.214764] pci 0000:01:00.0: reg 0x30: [mem 0xe0100000-0xe011ffff pref]
[    0.214864] pci 0000:01:00.0: supports D1 D2
[    0.214871] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.220040] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.220051] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.220060] pci 0000:00:1c.0:   bridge window [mem 0xe0100000-0xe01fffff]
[    0.220073] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[    0.220186] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.220304] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.220456] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.220476] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.220483] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.220519] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 04
[    0.220572] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:27b8]
[    0.220583] PCI: pci_cache_line_size set to 64 bytes
[    0.220631] pci 0000:00:1f.2: address space collision: [io  0x01f0-0x01f7] conflicts with 0000:00:1f.1 [io  0x01f0-0x01f7]
[    0.220640] pci 0000:00:1f.2: address space collision: [io  0x03f6] conflicts with 0000:00:1f.1 [io  0x03f6]
[    0.220648] pci 0000:00:1f.2: address space collision: [io  0x0170-0x0177] conflicts with 0000:00:1f.1 [io  0x0170-0x0177]
[    0.220655] pci 0000:00:1f.2: address space collision: [io  0x0376] conflicts with 0000:00:1f.1 [io  0x0376]
[    0.220693] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.220700] e820: reserve RAM buffer [mem 0x1f6d2000-0x1fffffff]
[    0.221014] NetLabel: Initializing
[    0.221021] NetLabel:  domain hash size = 128
[    0.221024] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.221059] NetLabel:  unlabeled traffic allowed by default
[    0.221132] hpet clockevent registered
[    0.221132] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.221132] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.221132] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.222545] Switched to clocksource hpet
[    0.238332] AppArmor: AppArmor Filesystem Enabled
[    0.238435] pnp: PnP ACPI: disabled
[    0.238445] PnPBIOS: Scanning system for PnP BIOS support...
[    0.238479] PnPBIOS: Found PnP BIOS installation structure at 0xc00f5fd0
[    0.238485] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xd2e0, dseg 0xf0000
[    0.239978] PnPBIOS: dev_node_info: function not supported on this system
[    0.239982] PnPBIOS: Unable to get node info.  Aborting.
[    0.246962] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.246978] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.246990] pci 0000:00:1c.0:   bridge window [mem 0xe0100000-0xe01fffff]
[    0.247000] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[    0.247012] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.247032] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.247051] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.247073] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.247080] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.247087] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.247093] pci_bus 0000:01: resource 1 [mem 0xe0100000-0xe01fffff]
[    0.247100] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe00fffff 64bit pref]
[    0.247108] pci_bus 0000:04: resource 4 [io  0x0000-0xffff]
[    0.247114] pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffff]
[    0.247211] NET: Registered protocol family 2
[    0.247630] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.247660] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.247697] TCP: Hash tables configured (established 4096 bind 4096)
[    0.247752] TCP: reno registered
[    0.247759] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.247773] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.247932] NET: Registered protocol family 1
[    0.247984] pci 0000:00:02.0: Boot video device
[    0.248109] pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
[    0.248158] pci 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
[    0.248202] pci 0000:00:1d.3: PCI->APIC IRQ transform: INT D -> IRQ 16
[    0.248245] pci 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23
[    0.248432] PCI: CLS 64 bytes, default 64
[    0.248614] Trying to unpack rootfs image as initramfs...
[   11.815831] Freeing initrd memory: 19832K (de374000 - df6d2000)
[   11.816428] platform rtc_cmos: registered platform RTC device (no PNP device found)
[   11.816703] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x218
[   11.816718] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x218
[   11.816935] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   11.816945] Scanning for low memory corruption every 60 seconds
[   11.817667] Initialise system trusted keyring
[   11.817796] audit: initializing netlink socket (disabled)
[   11.817846] type=2000 audit(1633577686.812:1): initialized
[   11.874651] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[   11.878082] zbud: loaded
[   11.878323] VFS: Disk quotas dquot_6.5.2
[   11.878465] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   11.879951] fuse init (API version 7.22)
[   11.880258] msgmni has been set to 970
[   11.880436] Key type big_key registered
[   11.881608] Key type asymmetric registered
[   11.881619] Asymmetric key parser 'x509' registered
[   11.881750] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[   11.881858] io scheduler noop registered
[   11.881866] io scheduler deadline registered (default)
[   11.881948] io scheduler cfq registered
[   11.882251] pcieport 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[   11.882318] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[   11.882500] pcieport 0000:00:1c.2: PCI->APIC IRQ transform: INT C -> IRQ 16
[   11.882542] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[   11.882665] pcieport 0000:00:1c.3: PCI->APIC IRQ transform: INT D -> IRQ 16
[   11.882705] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[   11.882911] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[   11.882921] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[   11.882931] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[   11.882980] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[   11.882990] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[   11.883038] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[   11.883050] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[   11.883098] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   11.883182] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 8086 ss_did 464c
[   11.883283] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[   11.883303] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[   11.883467] intel_idle: MWAIT substates: 0x10
[   11.883490] intel_idle: v0.4 model 0x1C
[   11.883496] intel_idle: lapic_timer_reliable_states 0x2
[   11.883607] ipmi message handler version 39.2
[   11.883841] isapnp: Scanning for PnP cards...
[   11.884162] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[   11.904891] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[   11.909457] Linux agpgart interface v0.103
[   11.909636] agpgart-intel 0000:00:00.0: Intel 945G Chipset
[   11.909773] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 524288K mappable
[   11.910052] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[   11.910376] agpgart-intel 0000:00:00.0: AGP aperture is 512M @ 0xc0000000
[   11.915696] brd: module loaded
[   11.918479] loop: module loaded
[   11.919051] ata_piix 0000:00:1f.1: version 2.13
[   11.919093] ata_piix 0000:00:1f.1: PCI->APIC IRQ transform: INT A -> IRQ 19
[   11.920199] scsi0 : ata_piix
[   11.920435] scsi1 : ata_piix
[   11.920562] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2060 irq 14
[   11.920570] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2068 irq 15
[   11.920633] ata_piix 0000:00:1f.2: device not available (can't reserve [io  0x0000-0x0007])
[   11.920648] ata_piix: probe of 0000:00:1f.2 failed with error -22
[   11.922143] libphy: Fixed MDIO Bus: probed
[   11.922662] tun: Universal TUN/TAP device driver, 1.6
[   11.922668] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   11.922860] PPP generic driver version 2.4.2
[   11.923032] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   11.923050] ehci-pci: EHCI PCI platform driver
[   11.923108] ehci-pci 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23
[   11.923194] ehci-pci 0000:00:1d.7: EHCI Host Controller
[   11.923219] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[   11.923253] ehci-pci 0000:00:1d.7: debug port 1
[   11.927207] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[   11.927264] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe0304000
[   11.936051] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[   11.936275] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   11.936285] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.936293] usb usb1: Product: EHCI Host Controller
[   11.936301] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[   11.936309] usb usb1: SerialNumber: 0000:00:1d.7
[   11.936706] hub 1-0:1.0: USB hub found
[   11.936742] hub 1-0:1.0: 8 ports detected
[   11.937399] ehci-platform: EHCI generic platform driver
[   11.937448] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   11.937454] ohci-pci: OHCI PCI platform driver
[   11.937499] ohci-platform: OHCI generic platform driver
[   11.937532] uhci_hcd: USB Universal Host Controller Interface driver
[   11.937632] uhci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
[   11.937665] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   11.937685] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   11.937743] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002000
[   11.937966] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[   11.937975] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.937983] usb usb2: Product: UHCI Host Controller
[   11.937993] usb usb2: Manufacturer: Linux 3.13.0-32-generic uhci_hcd
[   11.938000] usb usb2: SerialNumber: 0000:00:1d.0
[   11.938343] hub 2-0:1.0: USB hub found
[   11.938377] hub 2-0:1.0: 2 ports detected
[   11.938672] uhci_hcd 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
[   11.938702] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   11.938718] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[   11.938798] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002020
[   11.938984] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[   11.938993] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.939001] usb usb3: Product: UHCI Host Controller
[   11.939009] usb usb3: Manufacturer: Linux 3.13.0-32-generic uhci_hcd
[   11.939016] usb usb3: SerialNumber: 0000:00:1d.1
[   11.939319] hub 3-0:1.0: USB hub found
[   11.939349] hub 3-0:1.0: 2 ports detected
[   11.939624] uhci_hcd 0000:00:1d.3: PCI->APIC IRQ transform: INT D -> IRQ 16
[   11.939654] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   11.939669] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   11.939729] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002040
[   11.939904] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[   11.939914] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.939922] usb usb4: Product: UHCI Host Controller
[   11.939929] usb usb4: Manufacturer: Linux 3.13.0-32-generic uhci_hcd
[   11.939937] usb usb4: SerialNumber: 0000:00:1d.3
[   11.940340] hub 4-0:1.0: USB hub found
[   11.940371] hub 4-0:1.0: 2 ports detected
[   11.940859] i8042: PNP: No PS/2 controller found. Probing ports directly.
[   11.944128] serio: i8042 KBD port at 0x60,0x64 irq 1
[   11.944161] serio: i8042 AUX port at 0x60,0x64 irq 12
[   11.944597] mousedev: PS/2 mouse device common for all mice
[   11.945049] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[   11.945109] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram, hpet irqs
[   11.945378] device-mapper: uevent: version 1.0.3
[   11.945590] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[   11.945670] platform eisa.0: Probing EISA bus 0
[   11.945693] platform eisa.0: Cannot allocate resource for EISA slot 1
[   11.945703] platform eisa.0: Cannot allocate resource for EISA slot 2
[   11.945760] platform eisa.0: EISA: Detected 0 cards
[   11.945781] cpufreq-nforce2: No nForce2 chipset.
[   11.945791] ledtrig-cpu: registered to indicate activity on CPUs
[   11.946262] TCP: cubic registered
[   11.946619] NET: Registered protocol family 10
[   11.947260] NET: Registered protocol family 17
[   11.947298] Key type dns_resolver registered
[   11.948098] Using IPI No-Shortcut mode
[   11.948417] Loading compiled-in X.509 certificates
[   11.961793] Loaded X.509 cert 'Magrathea: Glacier signing key: a7fc6590fc4a8d859aaebda2ca5dd04716244fa0'
[   11.961842] registered taskstats version 1
[   11.971785] Key type trusted registered
[   11.978089] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[   11.980329] Key type encrypted registered
[   11.991626] AppArmor: AppArmor sha1 policy hashing enabled
[   11.991640] IMA: No TPM chip found, activating TPM-bypass!
[   11.992156] regulator-dummy: incomplete constraints, leaving on
[   11.992352]   Magic number: 8:818:562
[   11.992509] rtc_cmos rtc_cmos: hctosys: invalid date/time
[   11.992668] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   11.992674] EDD information not available.
[   11.992761] PM: Hibernation image not present or could not be loaded.
[   12.238122] isapnp: No Plug & Play device found
[   12.239360] Freeing unused kernel memory: 872K (c19b4000 - c1a8e000)
[   12.239533] Write protecting the kernel text: 6532k
[   12.239700] Write protecting the kernel read-only data: 2764k
[   12.239706] NX-protecting the kernel data: 5756k
[   12.248190] usb 1-3: new high-speed USB device number 2 using ehci-pci
[   12.287083] systemd-udevd[101]: starting version 204
[   12.396085] usb 1-3: New USB device found, idVendor=05dc, idProduct=c75c
[   12.396102] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   12.396111] usb 1-3: Product: USB Flash Drive
[   12.396119] usb 1-3: Manufacturer: Lexar
[   12.396127] usb 1-3: SerialNumber: 7B9369852A4F6EFF4A35
[   12.404007] pata_acpi 0000:00:1f.2: device not available (can't reserve [io  0x0000-0x0007])
[   12.405385] [drm] Initialized drm 1.1.0 20060810
[   12.427369] pata_acpi: probe of 0000:00:1f.2 failed with error -22
[   12.482328] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   12.482423] r8169 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[   12.482697] r8169 0000:01:00.0: irq 44 for MSI/MSI-X
[   12.483379] r8169 0000:01:00.0 eth0: RTL8102e at 0xdfee8000, 00:1c:c0:7d:00:e9, XID 04a00000 IRQ 44
[   12.732655] usb-storage 1-3:1.0: USB Mass Storage device detected
[   12.733265] scsi2 : usb-storage 1-3:1.0
[   12.733622] usbcore: registered new interface driver usb-storage
[   12.816053] tsc: Refined TSC clocksource calibration: 1599.999 MHz
[   13.734158] scsi 2:0:0:0: Direct-Access     Lexar    USB Flash Drive  8.07 PQ: 0 ANSI: 4
[   13.735178] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   13.737717] sd 2:0:0:0: [sda] 31285248 512-byte logical blocks: (16.0 GB/14.9 GiB)
[   13.739115] sd 2:0:0:0: [sda] Write Protect is off
[   13.739139] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[   13.741470] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   13.748230]  sda: sda1
[   13.752951] sd 2:0:0:0: [sda] Attached SCSI removable disk
[   13.816222] Switched to clocksource tsc
[   14.321225] ISO 9660 Extensions: Microsoft Joliet Level 3
[   14.338095] ISO 9660 Extensions: RRIP_1991A
[   14.419467] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   14.862938] random: debconf-communi urandom read with 67 bits of entropy available
[   15.882312] random: nonblocking pool is initialized
[   42.701263] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   43.439825] systemd-udevd[950]: starting version 204
[   44.116098] lp: driver loaded but no devices found
[   44.181842] ppdev: user-space parallel port driver
[   44.870596] intel_rng: FWH not detected
[   45.356174] ACPI Exception: AE_BAD_PARAMETER, Thread 3709259168 could not acquire Mutex [0x1] (20131115/utmutex-285)
[   45.356204] ACPI Exception: AE_BAD_PARAMETER, Thread 3709259168 could not acquire Mutex [0x1] (20131115/utmutex-285)
[   45.356217] ACPI Exception: AE_BAD_PARAMETER, Thread 3709259168 could not acquire Mutex [0x1] (20131115/utmutex-285)
[   45.441007] Bluetooth: Core ver 2.17
[   45.441139] NET: Registered protocol family 31
[   45.441149] Bluetooth: HCI device and connection manager initialized
[   45.441179] Bluetooth: HCI socket layer initialized
[   45.441194] Bluetooth: L2CAP socket layer initialized
[   45.441222] Bluetooth: SCO socket layer initialized
[   45.584273] leds_ss4200: no LED devices found
[   45.642920] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   45.642933] Bluetooth: BNEP filters: protocol multicast
[   45.642966] Bluetooth: BNEP socket layer initialized
[   45.653986] Bluetooth: RFCOMM TTY layer initialized
[   45.654025] Bluetooth: RFCOMM socket layer initialized
[   45.654061] Bluetooth: RFCOMM ver 1.11
[   46.587378] init: cups main process (1051) killed by HUP signal
[   46.587471] init: cups main process ended, respawning
[   47.388082] device-mapper: multipath: version 1.6.0 loaded
[   49.013984] gpio_ich: GPIO from 206 to 255 on gpio_ich
[   49.075512] init: failsafe main process (1168) killed by TERM signal
[   49.176934] snd_hda_intel 0000:00:1b.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[   49.177059] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   49.322873] hda_codec: ALC662 rev1: SKU not ready 0x411111f0
[   49.323245] autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[   49.323253]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   49.323262]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   49.323267]    mono: mono_out=0x0
[   49.323272]    dig-out=0x1e/0x0
[   49.323277]    inputs:
[   49.323285]      Front Mic=0x19
[   49.323291]      Rear Mic=0x18
[   49.323298]      Line=0x1a
[   49.323305] realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
[   49.323310] realtek: Enable default setup for auto mode as fallback
[   49.357843] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   49.376249] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   49.385808] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   49.386202] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   49.386524] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   49.395289] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[   49.406515] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[   50.653158] init: udev-fallback-graphics main process (1336) terminated with status 1
[   51.453369] r8169 0000:01:00.0 eth0: link down
[   51.453439] r8169 0000:01:00.0 eth0: link down
[   51.453631] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   51.455659] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   52.992436] r8169 0000:01:00.0 eth0: link up
[   52.992472] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   53.294386] init: alsa-restore main process (1585) terminated with status 99
[   54.661783] perf samples too long (2549 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[   56.554331] init: plymouth-upstart-bridge main process ended, respawning
[   64.527009] init: lightdm main process (1700) terminated with status 1
[   80.667949] init: failsafe-x main process (2076) terminated with status 1
[  162.682433] init: ssh main process ended, respawning
[  206.975878] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[  241.662682] perf samples too long (5052 > 5000), lowering kernel.perf_event_max_sample_rate to 25000