[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.12.5-302.fc20.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 4.8.2 20131212 (Red Hat 4.8.2-7) (GCC) ) #1 SMP Tue Dec 17 20:42:32 UTC 2013
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.12.5-302.fc20.x86_64 root=UUID=e0699ef5-0630-437b-8f36-464a4037ed67 ro vconsole.font=latarcyrheb-sun16 rhgb quiet radeon.dpm=1
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005e11ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000005e120000-0x000000007effffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: HP Pavilion m6 1035dx/Pavilion m6 1035dx, BIOS nuclearis 03/28/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x5e120 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 00005F000000 mask FFFFFF000000 uncachable
[    0.000000]   2 base 000060000000 mask FFFFE0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 base 0000FFC00000 mask FFFFFFC00000 write-protect
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f6ce0-0x000f6cef] mapped at [ffff8800000f6ce0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x02017000, 0x02017fff] PGTABLE
[    0.000000] BRK [0x02018000, 0x02018fff] PGTABLE
[    0.000000] BRK [0x02019000, 0x02019fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x5de00000-0x5dffffff]
[    0.000000]  [mem 0x5de00000-0x5dffffff] page 2M
[    0.000000] BRK [0x0201a000, 0x0201afff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x5c000000-0x5ddfffff]
[    0.000000]  [mem 0x5c000000-0x5ddfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x5bffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x5bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x5e000000-0x5e11ffff]
[    0.000000]  [mem 0x5e000000-0x5e11ffff] page 4k
[    0.000000] BRK [0x0201b000, 0x0201bfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x369da000-0x374e4fff]
[    0.000000] ACPI: RSDP 00000000000f6cc0 00014 (v00 CORE  )
[    0.000000] ACPI: RSDT 000000005e132624 00040 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 000000005e134200 000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 000000005e1326c8 01AF2 (v02 AMD    COREBOOT 00010001 INTL 20130626)
[    0.000000] ACPI: FACS 000000005e1341c0 00040
[    0.000000] ACPI: HPET 000000005e1342f8 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 000000005e134330 00072 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HEST 000000005e1343a8 001D0 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 000000005e134580 01ED4 (v02    AMD     ALIB 00000001 MSFT 04000000)
[    0.000000] ACPI: SSDT 000000005e136460 00B9C (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 000000005e136ffc 00045 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000005e11ffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x5e11ffff]
[    0.000000]   NODE_DATA [mem 0x5e10c000-0x5e11ffff]
[    0.000000]  [ffffea0000000000-ffffea00017fffff] PMD -> [ffff88005c000000-ffff88005d7fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x5e11ffff]
[    0.000000] On node 0 totalpages: 385214
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 5957 pages used for memmap
[    0.000000]   DMA32 zone: 381216 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x818
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x7f000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:1024 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88005de00000 s86784 r8192 d23808 u524288
[    0.000000] pcpu-alloc: s86784 r8192 d23808 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 379172
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.12.5-302.fc20.x86_64 root=UUID=e0699ef5-0630-437b-8f36-464a4037ed67 ro vconsole.font=latarcyrheb-sun16 rhgb quiet radeon.dpm=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ 0 size 32 MB
[    0.000000] Memory: 1487740K/1540856K available (6615K kernel code, 1040K rwdata, 2932K rodata, 1444K init, 1664K bss, 53116K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:65792 nr_irqs:712 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 6291456 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.001000] tsc: Detected 2295.738 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.47 BogoMIPS (lpj=2295738)
[    0.000015] pid_max: default: 32768 minimum: 301
[    0.000055] Security Framework initialized
[    0.000069] SELinux:  Initializing.
[    0.000080] SELinux:  Starting in permissive mode
[    0.000380] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001145] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.001457] Mount-cache hash table entries: 256
[    0.001702] Initializing cgroup subsys memory
[    0.001718] Initializing cgroup subsys devices
[    0.001721] Initializing cgroup subsys freezer
[    0.001723] Initializing cgroup subsys net_cls
[    0.001725] Initializing cgroup subsys blkio
[    0.001727] Initializing cgroup subsys perf_event
[    0.001730] Initializing cgroup subsys hugetlb
[    0.001755] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
[    0.001760] tseg: 0000000000
[    0.001767] CPU: Physical Processor ID: 0
[    0.001768] CPU: Processor Core ID: 0
[    0.001770] mce: CPU supports 7 MCE banks
[    0.001785] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
[    0.001885] Freeing SMP alternatives memory: 24K (ffffffff81e6f000 - ffffffff81e75000)
[    0.002997] ACPI: Core revision 20130725
[    0.005084] ACPI: All ACPI Tables successfully acquired
[    0.005090] ftrace: allocating 25428 entries in 100 pages
[    0.017199] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.027203] smpboot: CPU0: AMD A10-4600M APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
[    0.129017] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.129024] ... version:                0
[    0.129025] ... bit width:              48
[    0.129027] ... generic registers:      6
[    0.129028] ... value mask:             0000ffffffffffff
[    0.129030] ... max period:             00007fffffffffff
[    0.129032] ... fixed-purpose events:   0
[    0.129033] ... event mask:             000000000000003f
[    0.130811] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.141942] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
[    0.155207] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
[    0.130911] smpboot: Booting Node   0, Processors  #   1 #   2 #   3 OK
[    0.168433] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
[    0.170551] Brought up 4 CPUs
[    0.170555] smpboot: Total of 4 processors activated (18365.90 BogoMIPS)
[    0.171685] devtmpfs: initialized
[    0.173176] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.173178] pinctrl core: initialized pinctrl subsystem
[    0.173222] RTC time: 20:08:11, date: 03/28/14
[    0.173281] NET: Registered protocol family 16
[    0.173405] cpuidle: using governor menu
[    0.173488] ACPI: bus type PCI registered
[    0.173491] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.173556] PCI: Using configuration type 1 for base access
[    0.173557] PCI: Using configuration type 1 for extended access
[    0.175076] bio: create slab <bio-0> at 0
[    0.175239] ACPI: Added _OSI(Module Device)
[    0.175242] ACPI: Added _OSI(Processor Device)
[    0.175243] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.175245] ACPI: Added _OSI(Processor Aggregator Device)
[    0.176025] ACPI: EC: Look up EC in DSDT
[    0.176890] ACPI: Executed 1 blocks of module-level executable AML code
[    0.181016] ACPI: Interpreter enabled
[    0.181053] ACPI: (supports S0 S1 S2 S3 S4 S5)
[    0.181055] ACPI: Using IOAPIC for interrupt routing
[    0.181073] HEST: Table parsing has been initialized.
[    0.181077] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.181185] ACPI: No dock devices found.
[    0.185012] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.185106] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
[    0.185189] acpi PNP0A03:00: ACPI _OSC control (0x1d) granted
[    0.185317] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.185611] ACPI: \_SB_.PCI0.PWRB: can't evaluate _ADR (0x5)
[    0.185614] PCI host bridge to bus 0000:00
[    0.185617] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.185620] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.185623] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.185626] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.185628] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.185630] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xffffffff]
[    0.185639] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[    0.185774] pci 0000:00:01.0: [1002:9900] type 00 class 0x030000
[    0.185785] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.185791] pci 0000:00:01.0: reg 0x14: [io  0x2000-0x20ff]
[    0.185798] pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff]
[    0.185838] pci 0000:00:01.0: supports D1 D2
[    0.185936] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[    0.185945] pci 0000:00:01.1: reg 0x10: [mem 0xf0340000-0xf0343fff]
[    0.185996] pci 0000:00:01.1: supports D1 D2
[    0.186104] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[    0.186152] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.186225] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.186268] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
[    0.186315] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.186387] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.186460] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
[    0.186482] pci 0000:00:10.0: reg 0x10: [mem 0xf0348000-0xf0349fff 64bit]
[    0.186592] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.186673] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.186729] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[    0.186747] pci 0000:00:11.0: reg 0x10: [io  0x2410-0x2417]
[    0.186757] pci 0000:00:11.0: reg 0x14: [io  0x2420-0x2423]
[    0.186768] pci 0000:00:11.0: reg 0x18: [io  0x2418-0x241f]
[    0.186778] pci 0000:00:11.0: reg 0x1c: [io  0x2424-0x2427]
[    0.186788] pci 0000:00:11.0: reg 0x20: [io  0x2400-0x240f]
[    0.186799] pci 0000:00:11.0: reg 0x24: [mem 0xf034d000-0xf034d7ff]
[    0.186933] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    0.186948] pci 0000:00:12.0: reg 0x10: [mem 0xf034a000-0xf034afff]
[    0.187074] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.187121] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    0.187141] pci 0000:00:12.2: reg 0x10: [mem 0xf034d800-0xf034d8ff]
[    0.187227] pci 0000:00:12.2: supports D1 D2
[    0.187229] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.187300] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.187348] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[    0.187363] pci 0000:00:13.0: reg 0x10: [mem 0xf034b000-0xf034bfff]
[    0.187483] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.187529] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[    0.187549] pci 0000:00:13.2: reg 0x10: [mem 0xf034d900-0xf034d9ff]
[    0.187635] pci 0000:00:13.2: supports D1 D2
[    0.187637] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.187708] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.187756] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.187917] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.187939] pci 0000:00:14.2: reg 0x10: [mem 0xf0344000-0xf0347fff 64bit]
[    0.188011] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.188117] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.188276] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[    0.188366] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.188405] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[    0.188420] pci 0000:00:14.5: reg 0x10: [mem 0xf034c000-0xf034cfff]
[    0.188542] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.188583] pci 0000:00:14.7: [1022:7806] type 00 class 0x080501
[    0.188602] pci 0000:00:14.7: reg 0x10: [mem 0xf034da00-0xf034daff 64bit]
[    0.188745] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[    0.188851] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[    0.188956] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[    0.189063] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[    0.189170] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[    0.189271] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[    0.189444] pci 0000:01:00.0: [10ec:5289] type 00 class 0xff0000
[    0.189459] pci 0000:01:00.0: reg 0x10: [mem 0xf0100000-0xf010ffff]
[    0.189564] pci 0000:01:00.0: supports D1 D2
[    0.189567] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.189639] pci 0000:01:00.2: [10ec:8168] type 00 class 0x020000
[    0.189655] pci 0000:01:00.2: reg 0x10: [io  0x1000-0x10ff]
[    0.189679] pci 0000:01:00.2: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.189694] pci 0000:01:00.2: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.189758] pci 0000:01:00.2: supports D1 D2
[    0.189760] pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.191102] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.191111] pci 0000:00:04.0:   bridge window [io  0x1000-0x1fff]
[    0.191116] pci 0000:00:04.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.191121] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.191236] pci 0000:02:00.0: [168c:0032] type 00 class 0x028000
[    0.191279] pci 0000:02:00.0: reg 0x10: [mem 0xf0200000-0xf027ffff 64bit]
[    0.191340] pci 0000:02:00.0: reg 0x30: [mem 0xf0280000-0xf028ffff pref]
[    0.191396] pci 0000:02:00.0: supports D1 D2
[    0.191398] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.193110] pci 0000:00:05.0: PCI bridge to [bus 02]
[    0.193121] pci 0000:00:05.0:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.193237] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[    0.193248] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.193251] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.193254] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.193256] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.193259] pci 0000:00:14.4:   bridge window [mem 0x7f000000-0xffffffff] (subtractive decode)
[    0.193557] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.193635] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.193709] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.193782] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.193854] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.193926] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
[    0.194000] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.194075] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.194237] ACPI: Enabled 5 GPEs in block 00 to 1F
[    0.194246] ACPI: \_SB_.PCI0: notify handler is installed
[    0.194277] Found 1 acpi root devices
[    0.194428] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.194436] vgaarb: loaded
[    0.194438] vgaarb: bridge control possible 0000:00:01.0
[    0.194544] SCSI subsystem initialized
[    0.194613] libata version 3.00 loaded.
[    0.194646] ACPI: bus type USB registered
[    0.194670] usbcore: registered new interface driver usbfs
[    0.194683] usbcore: registered new interface driver hub
[    0.194713] usbcore: registered new device driver usb
[    0.194803] PCI: Using ACPI for IRQ routing
[    0.194806] PCI: pci_cache_line_size set to 64 bytes
[    0.194888] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.194890] e820: reserve RAM buffer [mem 0x5e120000-0x5fffffff]
[    0.195008] NetLabel: Initializing
[    0.195013] NetLabel:  domain hash size = 128
[    0.195014] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.195027] NetLabel:  unlabeled traffic allowed by default
[    0.195085] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.195090] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.197214] Switched to clocksource hpet
[    0.206454] pnp: PnP ACPI init
[    0.206475] ACPI: bus type PNP registered
[    0.206681] system 00:00: [mem 0xf034db02-0xf034eb01] has been reserved
[    0.206687] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.206735] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.206770] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.206785] pnp 00:03: [dma 4]
[    0.206812] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.206849] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.207025] pnp: PnP ACPI: found 5 devices
[    0.207027] ACPI: bus type PNP unregistered
[    0.214437] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.214442] pci 0000:00:04.0:   bridge window [io  0x1000-0x1fff]
[    0.214447] pci 0000:00:04.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.214451] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.214456] pci 0000:00:05.0: PCI bridge to [bus 02]
[    0.214460] pci 0000:00:05.0:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.214465] pci 0000:00:14.4: PCI bridge to [bus 03]
[    0.214479] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.214482] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.214484] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.214487] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.214489] pci_bus 0000:00: resource 8 [mem 0x7f000000-0xffffffff]
[    0.214492] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.214494] pci_bus 0000:01: resource 1 [mem 0xf0100000-0xf01fffff]
[    0.214497] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.214500] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff]
[    0.214503] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.214505] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.214507] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.214510] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[    0.214512] pci_bus 0000:03: resource 8 [mem 0x7f000000-0xffffffff]
[    0.214559] NET: Registered protocol family 2
[    0.214798] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    0.214923] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.214998] TCP: Hash tables configured (established 16384 bind 16384)
[    0.215043] TCP: reno registered
[    0.215050] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.215067] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.215147] NET: Registered protocol family 1
[    0.215160] pci 0000:00:01.0: Boot video device
[    0.216930] PCI: CLS 64 bytes, default 64
[    0.216986] Unpacking initramfs...
[    0.456323] Freeing initrd memory: 11308K (ffff8800369da000 - ffff8800374e5000)
[    0.456543] perf: AMD NB counters detected
[    0.456567] LVT offset 0 assigned for vector 0x400
[    0.456597] perf: AMD IBS detected (0x000000ff)
[    0.460308] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    0.460798] Initialise system trusted keyring
[    0.460857] audit: initializing netlink socket (disabled)
[    0.460878] type=2000 audit(1396037291.353:1): initialized
[    0.491186] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.492916] zbud: loaded
[    0.493098] VFS: Disk quotas dquot_6.5.2
[    0.493154] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.493790] msgmni has been set to 2927
[    0.493867] Key type big_key registered
[    0.493869] SELinux:  Registering netfilter hooks
[    0.495142] alg: No test for stdrng (krng)
[    0.495151] NET: Registered protocol family 38
[    0.495154] Key type asymmetric registered
[    0.495158] Asymmetric key parser 'x509' registered
[    0.495230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.495277] io scheduler noop registered
[    0.495280] io scheduler deadline registered
[    0.495320] io scheduler cfq registered (default)
[    0.495440] pcieport 0000:00:04.0: device [1022:1414] has invalid IRQ; check vendor BIOS
[    0.495647] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[    0.495699] pcieport 0000:00:05.0: device [1022:1415] has invalid IRQ; check vendor BIOS
[    0.495853] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[    0.495935] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[    0.495939] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.495941] pci 0000:01:00.2: Signaling PME through PCIe PME interrupt
[    0.495945] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[    0.495962] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[    0.495965] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.495968] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[    0.495986] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.496005] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.496123] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input0
[    0.496127] ACPI: Power Button [PWRB]
[    0.496173] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.496175] ACPI: Power Button [PWRF]
[    0.496321] ACPI: acpi_idle registered with cpuidle
[    0.496712] GHES: Failed to enable APEI firmware first mode.
[    0.496789] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.497376] Non-volatile memory driver v1.3
[    0.497379] Linux agpgart interface v0.103
[    0.497506] ahci 0000:00:11.0: version 3.0
[    0.497740] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[    0.497745] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio 
[    0.498403] scsi0 : ahci
[    0.498549] scsi1 : ahci
[    0.498634] scsi2 : ahci
[    0.498720] scsi3 : ahci
[    0.498806] scsi4 : ahci
[    0.498893] scsi5 : ahci
[    0.498943] ata1: SATA max UDMA/133 abar m2048@0xf034d000 port 0xf034d100 irq 19
[    0.498945] ata2: DUMMY
[    0.498947] ata3: DUMMY
[    0.498948] ata4: DUMMY
[    0.498950] ata5: DUMMY
[    0.498951] ata6: DUMMY
[    0.499093] libphy: Fixed MDIO Bus: probed
[    0.499207] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.499211] ehci-pci: EHCI PCI platform driver
[    0.499431] ehci-pci 0000:00:12.2: EHCI Host Controller
[    0.499491] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    0.499505] QUIRK: Enable AMD PLL fix
[    0.499507] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    0.499519] ehci-pci 0000:00:12.2: debug port 1
[    0.499569] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034d800
[    0.505307] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    0.505502] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.505507] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.505511] usb usb1: Product: EHCI Host Controller
[    0.505513] usb usb1: Manufacturer: Linux 3.12.5-302.fc20.x86_64 ehci_hcd
[    0.505515] usb usb1: SerialNumber: 0000:00:12.2
[    0.505712] hub 1-0:1.0: USB hub found
[    0.505734] hub 1-0:1.0: 5 ports detected
[    0.506169] ehci-pci 0000:00:13.2: EHCI Host Controller
[    0.506256] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    0.506261] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    0.506273] ehci-pci 0000:00:13.2: debug port 1
[    0.506310] ehci-pci 0000:00:13.2: irq 17, io mem 0xf034d900
[    0.512312] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    0.512536] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.512542] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.512545] usb usb2: Product: EHCI Host Controller
[    0.512548] usb usb2: Manufacturer: Linux 3.12.5-302.fc20.x86_64 ehci_hcd
[    0.512550] usb usb2: SerialNumber: 0000:00:13.2
[    0.512749] hub 2-0:1.0: USB hub found
[    0.512772] hub 2-0:1.0: 5 ports detected
[    0.513039] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.513042] ohci-pci: OHCI PCI platform driver
[    0.513262] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    0.513327] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    0.513359] ohci-pci 0000:00:12.0: irq 18, io mem 0xf034a000
[    0.568364] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.568370] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.568373] usb usb3: Product: OHCI PCI host controller
[    0.568375] usb usb3: Manufacturer: Linux 3.12.5-302.fc20.x86_64 ohci_hcd
[    0.568377] usb usb3: SerialNumber: 0000:00:12.0
[    0.568553] hub 3-0:1.0: USB hub found
[    0.568564] hub 3-0:1.0: 5 ports detected
[    0.568897] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    0.568970] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[    0.568987] ohci-pci 0000:00:13.0: irq 18, io mem 0xf034b000
[    0.623362] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.623367] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.623370] usb usb4: Product: OHCI PCI host controller
[    0.623373] usb usb4: Manufacturer: Linux 3.12.5-302.fc20.x86_64 ohci_hcd
[    0.623375] usb usb4: SerialNumber: 0000:00:13.0
[    0.623552] hub 4-0:1.0: USB hub found
[    0.623564] hub 4-0:1.0: 5 ports detected
[    0.623907] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    0.623971] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[    0.623988] ohci-pci 0000:00:14.5: irq 18, io mem 0xf034c000
[    0.678353] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.678359] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.678362] usb usb5: Product: OHCI PCI host controller
[    0.678364] usb usb5: Manufacturer: Linux 3.12.5-302.fc20.x86_64 ohci_hcd
[    0.678366] usb usb5: SerialNumber: 0000:00:14.5
[    0.678544] hub 5-0:1.0: USB hub found
[    0.678555] hub 5-0:1.0: 2 ports detected
[    0.678670] uhci_hcd: USB Universal Host Controller Interface driver
[    0.678892] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    0.678957] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[    0.679199] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
[    0.679209] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[    0.679218] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[    0.679225] xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
[    0.679232] xhci_hcd 0000:00:10.0: irq 46 for MSI/MSI-X
[    0.679363] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    0.679366] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.679368] usb usb6: Product: xHCI Host Controller
[    0.679371] usb usb6: Manufacturer: Linux 3.12.5-302.fc20.x86_64 xhci_hcd
[    0.679373] usb usb6: SerialNumber: 0000:00:10.0
[    0.679498] hub 6-0:1.0: USB hub found
[    0.679508] hub 6-0:1.0: 2 ports detected
[    0.679604] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    0.679656] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
[    0.682600] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
[    0.682603] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.682605] usb usb7: Product: xHCI Host Controller
[    0.682607] usb usb7: Manufacturer: Linux 3.12.5-302.fc20.x86_64 xhci_hcd
[    0.682609] usb usb7: SerialNumber: 0000:00:10.0
[    0.682734] hub 7-0:1.0: USB hub found
[    0.682744] hub 7-0:1.0: 2 ports detected
[    0.687369] usbcore: registered new interface driver usbserial
[    0.687383] usbcore: registered new interface driver usbserial_generic
[    0.687392] usbserial: USB Serial support registered for generic
[    0.687428] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.751428] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.751438] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.751736] mousedev: PS/2 mouse device common for all mice
[    0.754386] rtc_cmos 00:01: RTC can wake from S4
[    0.754550] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.754580] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
[    0.754668] device-mapper: uevent: version 1.0.3
[    0.754762] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[    0.754870] hidraw: raw HID events driver (C) Jiri Kosina
[    0.755004] usbcore: registered new interface driver usbhid
[    0.755006] usbhid: USB HID core driver
[    0.755051] drop_monitor: Initializing network drop monitor service
[    0.755142] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.755266] TCP: cubic registered
[    0.755268] Initializing XFRM netlink socket
[    0.755401] NET: Registered protocol family 10
[    0.755628] mip6: Mobile IPv6
[    0.755631] NET: Registered protocol family 17
[    0.756174] Loading compiled-in X.509 certificates
[    0.757476] Loaded X.509 cert 'Fedora kernel signing key: af76429a101644b9d73e50f71927be8c6f08a0c9'
[    0.757497] registered taskstats version 1
[    0.758094]   Magic number: 6:273:145
[    0.758113] ata_port ata2: hash matches
[    0.758116]  ata2: hash matches
[    0.758135] acpi device:16: hash matches
[    0.758199] rtc_cmos 00:01: setting system clock to 2014-03-28 20:08:12 UTC (1396037292)
[    0.758229] PM: Hibernation image not present or could not be loaded.
[    0.803303] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.803925] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.804787] ata1.00: ATA-8: Hitachi HTS547564A9E384, JEDOA50A, max UDMA/100
[    0.804792] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.806348] ata1.00: configured for UDMA/100
[    0.806514] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54756 JEDO PQ: 0 ANSI: 5
[    0.806664] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    0.806668] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.806717] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.806722] sd 0:0:0:0: [sda] Write Protect is off
[    0.806727] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.806751] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.817395] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.842022]  sda: sda1 sda2 sda3
[    0.842595] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.844032] Freeing unused kernel memory: 1444K (ffffffff81d06000 - ffffffff81e6f000)
[    0.844038] Write protecting the kernel read-only data: 12288k
[    0.853627] Freeing unused kernel memory: 1564K (ffff880001679000 - ffff880001800000)
[    0.857916] Freeing unused kernel memory: 1164K (ffff880001add000 - ffff880001c00000)
[    0.862636] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    0.862877] systemd[1]: Running in initial RAM disk.
[    0.862948] systemd[1]: Set hostname to <localhost.localdomain>.
[    0.871474] systemd[1]: Expecting device dev-disk-by\x2duuid-e0699ef5\x2d0630\x2d437b\x2d8f36\x2d464a4037ed67.device...
[    0.871493] systemd[1]: Starting -.slice.
[    0.871700] systemd[1]: Created slice -.slice.
[    0.871715] systemd[1]: Starting System Slice.
[    0.871816] systemd[1]: Created slice System Slice.
[    0.871829] systemd[1]: Starting Slices.
[    0.871842] systemd[1]: Reached target Slices.
[    0.871854] systemd[1]: Starting Timers.
[    0.871866] systemd[1]: Reached target Timers.
[    0.871878] systemd[1]: Starting Journal Socket.
[    0.871950] systemd[1]: Listening on Journal Socket.
[    0.872150] systemd[1]: Started dracut cmdline hook.
[    0.872395] systemd[1]: Started dracut pre-udev hook.
[    0.872408] systemd[1]: Starting Journal Service...
[    0.872923] systemd[1]: Started Journal Service.
[    0.880860] systemd-journald[95]: Vacuuming done, freed 0 bytes
[    0.921626] systemd-udevd[108]: starting version 208
[    0.934257] usb 1-1: New USB device found, idVendor=04b4, idProduct=8613
[    0.934264] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    0.934268] usb 1-1: Product: EHCI Debug cable
[    0.934271] usb 1-1: Manufacturer: None
[    0.981977] [drm] Initialized drm 1.1.0 20060810
[    1.018499] [drm] radeon kernel modesetting enabled.
[    1.019077] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9900 0x1002:0x9900).
[    1.019107] [drm] register mmio base: 0xF0300000
[    1.019109] [drm] register mmio size: 262144
[    1.019160] ATOM BIOS: HP
[    1.019249] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[    1.019254] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[    1.019257] [drm] Detected VRAM RAM=512M, BAR=256M
[    1.019259] [drm] RAM width 32bits DDR
[    1.019321] [TTM] Zone  kernel: Available graphics memory: 751622 kiB
[    1.019323] [TTM] Initializing pool allocator
[    1.019329] [TTM] Initializing DMA pool allocator
[    1.019351] [drm] radeon: 512M of VRAM memory ready
[    1.019352] [drm] radeon: 1024M of GTT memory ready.
[    1.019637] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.033309] [drm] Loading ARUBA Microcode
[    1.036300] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.037126] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
[    1.037371] radeon 0000:00:01.0: WB enabled
[    1.037377] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800372acc00
[    1.038133] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90000535a18
[    1.038137] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff8800372acc04
[    1.038141] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff8800372acc08
[    1.038145] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800372acc0c
[    1.038149] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff8800372acc10
[    1.038153] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.038156] [drm] Driver supports precise vblank timestamp query.
[    1.038203] radeon 0000:00:01.0: irq 47 for MSI/MSI-X
[    1.038219] radeon 0000:00:01.0: radeon: using MSI.
[    1.038506] [drm] radeon: irq initialized.
[    1.057688] [drm] ring test on 0 succeeded in 2 usecs
[    1.057750] [drm] ring test on 3 succeeded in 2 usecs
[    1.057760] [drm] ring test on 4 succeeded in 1 usecs
[    1.113849] [drm] ring test on 5 succeeded in 1 usecs
[    1.133878] [drm] UVD initialized successfully.
[    1.135184] [drm] Enabling audio 0 support
[    1.135187] [drm] Enabling audio 1 support
[    1.135189] [drm] Enabling audio 2 support
[    1.135192] [drm] Enabling audio 3 support
[    1.135194] [drm] Enabling audio 4 support
[    1.135196] [drm] Enabling audio 5 support
[    1.135747] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.136299] [drm] ib test on ring 3 succeeded in 0 usecs
[    1.136830] [drm] ib test on ring 4 succeeded in 1 usecs
[    1.157682] [drm] ib test on ring 5 succeeded
[    1.179936] [drm] radeon atom DIG backlight initialized
[    1.179941] [drm] Radeon Display Connectors
[    1.179943] [drm] Connector 0:
[    1.179945] [drm]   LVDS-1
[    1.179946] [drm]   HPD1
[    1.179949] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[    1.179950] [drm]   Encoders:
[    1.179952] [drm]     LCD1: INTERNAL_UNIPHY2
[    1.179953] [drm]     LCD1: TRAVIS
[    1.179954] [drm] Connector 1:
[    1.179956] [drm]   VGA-1
[    1.179957] [drm]   HPD2
[    1.179959] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[    1.179960] [drm]   Encoders:
[    1.179961] [drm]     CRT1: INTERNAL_UNIPHY2
[    1.179963] [drm]     CRT1: NUTMEG
[    1.179964] [drm] Connector 2:
[    1.179966] [drm]   HDMI-A-1
[    1.179967] [drm]   HPD3
[    1.179969] [drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[    1.179970] [drm]   Encoders:
[    1.179971] [drm]     DFP1: INTERNAL_UNIPHY
[    1.206043] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2c0e
[    1.206049] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    1.206054] usb 2-1: Product: HP Truevision HD
[    1.206056] usb 2-1: Manufacturer: DCQMR014P2P984
[    1.212551] [drm] Internal thermal controller without fan control
[    1.212620] == power state 0 ==
[    1.212623] 	ui class: none
[    1.212625] 	internal class: uvd_sd 
[    1.212627] 	caps: 
[    1.212630] 	uvd    vclk: 30000 dclk: 24828
[    1.212633] 		power level 0    sclk: 27693 vddc: 899
[    1.212636] 		power level 1    sclk: 33489 vddc: 1024
[    1.212638] 	status: 
[    1.212640] == power state 1 ==
[    1.212641] 	ui class: none
[    1.212643] 	internal class: uvd_hd 
[    1.212644] 	caps: 
[    1.212646] 	uvd    vclk: 40000 dclk: 30000
[    1.212649] 		power level 0    sclk: 33489 vddc: 1024
[    1.212650] 	status: 
[    1.212652] == power state 2 ==
[    1.212653] 	ui class: none
[    1.212655] 	internal class: uvd 
[    1.212656] 	caps: 
[    1.212658] 	uvd    vclk: 72000 dclk: 60000
[    1.212661] 		power level 0    sclk: 49656 vddc: 1099
[    1.212663] 		power level 1    sclk: 68572 vddc: 1187
[    1.212665] 	status: 
[    1.212667] == power state 3 ==
[    1.212668] 	ui class: none
[    1.212670] 	internal class: uvd_mvc 
[    1.212671] 	caps: 
[    1.212673] 	uvd    vclk: 72000 dclk: 60000
[    1.212676] 		power level 0    sclk: 49656 vddc: 1099
[    1.212678] 		power level 1    sclk: 68572 vddc: 1187
[    1.212679] 	status: 
[    1.212681] == power state 4 ==
[    1.212682] 	ui class: battery
[    1.212684] 	internal class: none
[    1.212686] 	caps: 
[    1.212687] 	uvd    vclk: 0 dclk: 0
[    1.212690] 		power level 0    sclk: 27693 vddc: 899
[    1.212693] 		power level 1    sclk: 33489 vddc: 1024
[    1.212694] 	status: 
[    1.212696] == power state 5 ==
[    1.212697] 	ui class: performance
[    1.212698] 	internal class: none
[    1.212700] 	caps: 
[    1.212702] 	uvd    vclk: 0 dclk: 0
[    1.212705] 		power level 0    sclk: 33489 vddc: 1024
[    1.212707] 		power level 1    sclk: 49656 vddc: 1099
[    1.212709] 		power level 2    sclk: 68572 vddc: 1187
[    1.212710] 	status: 
[    1.212712] == power state 6 ==
[    1.212713] 	ui class: none
[    1.212714] 	internal class: boot 
[    1.212716] 	caps: 
[    1.212717] 	uvd    vclk: 0 dclk: 0
[    1.212719] 		power level 0    sclk: 20000 vddc: 1187
[    1.212720] 	status: c r b 
[    1.212723] == power state 7 ==
[    1.212724] 	ui class: none
[    1.212725] 	internal class: thermal 
[    1.212727] 	caps: 
[    1.212728] 	uvd    vclk: 0 dclk: 0
[    1.212731] 		power level 0    sclk: 20000 vddc: 899
[    1.212732] 	status: 
[    1.213122] switching from power state:
[    1.213124] 	ui class: none
[    1.213125] 	internal class: boot 
[    1.213127] 	caps: 
[    1.213128] 	uvd    vclk: 0 dclk: 0
[    1.213130] 		power level 0    sclk: 20000 vddc: 1187
[    1.213131] 	status: c b 
[    1.213133] switching to power state:
[    1.213134] 	ui class: performance
[    1.213136] 	internal class: none
[    1.213137] 	caps: 
[    1.213139] 	uvd    vclk: 0 dclk: 0
[    1.213141] 		power level 0    sclk: 33489 vddc: 1024
[    1.213143] 		power level 1    sclk: 49656 vddc: 1099
[    1.213145] 		power level 2    sclk: 68572 vddc: 1187
[    1.213146] 	status: r 
[    1.213333] [drm] radeon: dpm initialized
[    1.297986] [drm] fb mappable at 0xE1488000
[    1.297990] [drm] vram apper at 0xE0000000
[    1.297992] [drm] size 4325376
[    1.297994] [drm] fb depth is 24
[    1.297996] [drm]    pitch is 5632
[    1.298099] fbcon: radeondrmfb (fb0) is primary device
[    1.416449] Console: switching to colour frame buffer device 170x48
[    1.419708] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[    1.419710] radeon 0000:00:01.0: registered panic notifier
[    1.419718] [drm] Initialized radeon 2.34.0 20080528 for 0000:00:01.0 on minor 0
[    1.458160] tsc: Refined TSC clocksource calibration: 2295.824 MHz
[    1.507603] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.755355] usb 4-3: new full-speed USB device number 2 using ohci-pci
[    1.770622] systemd-journald[95]: Received SIGTERM
[    1.902425] usb 4-3: New USB device found, idVendor=138a, idProduct=0018
[    1.902431] usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    1.902434] usb 4-3: SerialNumber: cb7da7ad5b05
[    2.386932] type=1404 audit(1396037294.127:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    2.460266] Switched to clocksource tsc
[    2.553325] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x26c00, board id: 2054, fw id: 1196324
[    2.629521] SELinux: 2048 avtab hash slots, 98441 rules.
[    2.655257] SELinux: 2048 avtab hash slots, 98441 rules.
[    2.692284] SELinux:  8 users, 85 roles, 4781 types, 277 bools, 1 sens, 1024 cats
[    2.692288] SELinux:  83 classes, 98441 rules
[    2.698989] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
[    2.701437] SELinux:  Completing initialization.
[    2.701441] SELinux:  Setting up existing superblocks.
[    2.701451] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    2.701458] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[    2.701470] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[    2.701477] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[    2.701493] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.701581] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[    2.702991] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[    2.704074] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[    2.704078] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[    2.704084] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[    2.704087] SELinux: initialized (dev aio, type aio), not configured for labeling
[    2.704091] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[    2.704115] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[    2.704125] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[    2.704134] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[    2.704150] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    2.704498] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[    2.704501] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.704508] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.704682] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.704746] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.704757] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[    2.704760] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.704767] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.704774] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.704784] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.704789] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.704793] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.704798] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.704808] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.704812] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.704823] SELinux: initialized (dev sda2, type ext4), uses xattr
[    2.722543] type=1403 audit(1396037294.463:3): policy loaded auid=4294967295 ses=4294967295
[    2.796111] systemd[1]: Successfully loaded SELinux policy in 443.905ms.
[    2.995898] systemd[1]: Relabelled /dev and /run in 22.057ms.
[    4.856189] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[    4.986488] systemd-readahead[232]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[    5.643452] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[    5.644372] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    5.644706] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[    5.820578] systemd-udevd[271]: starting version 208
[    6.278432] RPC: Registered named UNIX socket transport module.
[    6.278438] RPC: Registered udp transport module.
[    6.278440] RPC: Registered tcp transport module.
[    6.278444] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    6.279575] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[    6.312266] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    6.312751] SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
[    6.395378] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[    6.458866] acpi-cpufreq: overriding BIOS provided _PSD data
[    6.524262] microcode: CPU0: patch_level=0x0600110f
[    6.622773] microcode: CPU0: new patch_level=0x06001119
[    6.622921] microcode: CPU1: patch_level=0x0600110f
[    6.622950] microcode: CPU2: patch_level=0x0600110f
[    6.636054] microcode: CPU2: new patch_level=0x06001119
[    6.636106] microcode: CPU3: patch_level=0x0600110f
[    6.636833] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    6.658616] alg: No test for crc32 (crc32-pclmul)
[    6.666014] ALSA sound/pci/hda/hda_intel.c:3374 0000:00:01.1: Using LPIB position fix
[    6.666019] ALSA sound/pci/hda/hda_intel.c:3495 0000:00:01.1: Force to non-snoop mode
[    6.666056] snd_hda_intel 0000:00:01.1: irq 48 for MSI/MSI-X
[    6.668333] ALSA sound/pci/hda/hda_intel.c:1796 0000:00:01.1: Enable sync_write for stable communication
[    6.681605] ALSA sound/pci/hda/hda_eld.c:334 HDMI: ELD buf size is 0, force 128
[    6.681622] ALSA sound/pci/hda/hda_eld.c:351 HDMI: invalid ELD data byte 0
[    6.681668] ALSA sound/pci/hda/hda_eld.c:334 HDMI: ELD buf size is 0, force 128
[    6.681682] ALSA sound/pci/hda/hda_eld.c:351 HDMI: invalid ELD data byte 0
[    6.681731] ALSA sound/pci/hda/hda_eld.c:334 HDMI: ELD buf size is 0, force 128
[    6.681744] ALSA sound/pci/hda/hda_eld.c:351 HDMI: invalid ELD data byte 0
[    6.681794] ALSA sound/pci/hda/hda_eld.c:334 HDMI: ELD buf size is 0, force 128
[    6.681807] ALSA sound/pci/hda/hda_eld.c:351 HDMI: invalid ELD data byte 0
[    6.681947] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[    6.682601] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
[    6.682716] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
[    6.682859] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
[    6.683808] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    6.683880] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb20
[    6.684168] ALSA sound/pci/hda/hda_intel.c:3374 0000:00:14.2: Using LPIB position fix
[    6.688305] ALSA sound/pci/hda/hda_intel.c:1796 0000:00:14.2: Enable sync_write for stable communication
[    6.698476] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0) type:line
[    6.698484] ALSA sound/pci/hda/hda_auto_parser.c:397    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[    6.698489] ALSA sound/pci/hda/hda_auto_parser.c:401    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    6.698492] ALSA sound/pci/hda/hda_auto_parser.c:402    mono: mono_out=0x0
[    6.698495] ALSA sound/pci/hda/hda_auto_parser.c:405    dig-out=0x1f/0x20
[    6.698498] ALSA sound/pci/hda/hda_auto_parser.c:406    inputs:
[    6.698502] ALSA sound/pci/hda/hda_auto_parser.c:410      Rear Mic=0xc
[    6.698506] ALSA sound/pci/hda/hda_auto_parser.c:410      Front Mic=0xa
[    6.698509] ALSA sound/pci/hda/hda_auto_parser.c:410      Internal Mic=0x11
[    6.698513] ALSA sound/pci/hda/hda_auto_parser.c:410      Line=0xf
[    6.714068] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[    6.714235] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[    6.714353] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[    6.714470] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[    6.714585] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[    6.715370] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.911349] EXT4-fs (sda2): re-mounted. Opts: (null)
[    7.229606] sdhci: Secure Digital Host Controller Interface driver
[    7.229610] sdhci: Copyright(c) Pierre Ossman
[    7.244760] media: Linux media interface: v0.10
[    7.462197] rtsx_pci 0000:01:00.0: irq 49 for MSI/MSI-X
[    7.462222] rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 49
[    7.513288] kvm: Nested Virtualization enabled
[    7.513294] kvm: Nested Paging enabled
[    7.672010] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7806] (rev 0)
[    7.672452] mmc1: SDHCI controller on PCI [0000:00:14.7] using ADMA
[    7.728402] cfg80211: Calling CRDA to update world regulatory domain
[    7.783997] ath: phy0: Enable LNA combining
[    7.785206] ath: phy0: ASPM enabled: 0x43
[    7.785210] ath: EEPROM regdomain: 0x60
[    7.785212] ath: EEPROM indicates we should expect a direct regpair map
[    7.785216] ath: Country alpha2 being used: 00
[    7.785219] ath: Regpair used: 0x60
[    7.796094] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    7.796860] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90004500000, irq=17
[    7.823994] systemd-udevd[284]: renamed network interface wlan0 to wlp2s0
[    7.890323] Linux video capture interface: v2.00
[    7.902586] uvcvideo: Found UVC 1.00 device HP Truevision HD (1bcf:2c0e)
[    7.911793] input: HP Truevision HD as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input14
[    7.912058] usbcore: registered new interface driver uvcvideo
[    7.912061] USB Video Class driver (1.1.1)
[    8.014342] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    8.014662] r8169 0000:01:00.2: irq 50 for MSI/MSI-X
[    8.015034] r8169 0000:01:00.2 eth0: RTL8411 at 0xffffc9000047e000, 28:92:4a:18:59:d6, XID 08800800 IRQ 50
[    8.015042] r8169 0000:01:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    8.037959] systemd-udevd[281]: renamed network interface eth0 to enp1s0f2
[    8.124342] cfg80211: World regulatory domain updated:
[    8.124349] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.124353] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    8.124357] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    8.124360] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[    8.124363] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    8.124366] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    8.124369] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[    8.124389] cfg80211: Calling CRDA for country: US
[    8.129539] cfg80211: Regulatory domain changed to country: US
[    8.129545] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.129549] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[    8.129553] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
[    8.129556] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
[    8.129559] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
[    8.129562] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[   11.629047] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   11.629069] SELinux: initialized (dev sda1, type ext4), uses xattr
[   12.517378] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   12.517397] SELinux: initialized (dev sda3, type ext4), uses xattr
[   12.536294] systemd-journald[253]: Received request to flush runtime journal from PID 1
[   12.783084] type=1305 audit(1396037304.524:4): audit_pid=416 old=0 auid=4294967295 ses=4294967295
 subj=system_u:system_r:auditd_t:s0 res=1
[   13.584718] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   13.607440] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   13.665510] Ebtables v2.0 registered
[   13.688734] Bridge firewalling registered
[   13.858616] systemd[1]: Unit rngd.service entered failed state.
[   23.186650] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   23.582640] r8169 0000:01:00.2 enp1s0f2: link down
[   23.582705] IPv6: ADDRCONF(NETDEV_UP): enp1s0f2: link is not ready
[   23.628170] Bluetooth: Core ver 2.16
[   23.628313] NET: Registered protocol family 31
[   23.628315] Bluetooth: HCI device and connection manager initialized
[   23.628326] Bluetooth: HCI socket layer initialized
[   23.628331] Bluetooth: L2CAP socket layer initialized
[   23.628339] Bluetooth: SCO socket layer initialized
[   23.634851] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.634856] Bluetooth: BNEP filters: protocol multicast
[   23.634869] Bluetooth: BNEP socket layer initialized
[   47.343319] wlp2s0: authenticate with 5c:d9:98:e5:53:e6
[   47.361146] wlp2s0: send auth to 5c:d9:98:e5:53:e6 (try 1/3)
[   47.362664] wlp2s0: authenticated
[   47.364004] wlp2s0: associate with 5c:d9:98:e5:53:e6 (try 1/3)
[   47.366815] wlp2s0: RX AssocResp from 5c:d9:98:e5:53:e6 (capab=0x431 status=0 aid=3)
[   47.366880] wlp2s0: associated
[   47.366895] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   47.367581] cfg80211: Calling CRDA for country: DE
[   47.374921] ath: regdomain 0x8114 updated by CountryIE
[   47.374926] ath: EEPROM regdomain: 0x8114
[   47.374928] ath: EEPROM indicates we should expect a country code
[   47.374930] ath: doing EEPROM country->regdmn map search
[   47.374932] ath: country maps to regdmn code: 0x37
[   47.374934] ath: Country alpha2 being used: DE
[   47.374936] ath: Regpair used: 0x37
[   47.374954] cfg80211: Regulatory domain changed to country: DE
[   47.374956] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   47.374958] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   47.374960] cfg80211:   (5150000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   47.374962] cfg80211:   (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698 mBm)
[   47.374965] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)