[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt 
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.2-463-g16c7e0f-dirty 12/02/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000180000000 aka 6144M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1ae0-0x000f1aef] mapped at [ffff8800000f1ae0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
[    0.000000]  [mem 0x17fe00000-0x17fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
[    0.000000]  [mem 0x17c000000-0x17fdfffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
[    0.000000]  [mem 0x100000000-0x17bffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbff9afff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1CB0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150619)
[    0.000000] ACPI: FACS 0x00000000BFFB4240 000040
[    0.000000] ACPI: SSDT 0x00000000BFFB69D0 000EA6 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0x00000000BFFB7880 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000BFFB78C0 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFB7990 000150 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFB7AE0 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000BFFB7B10 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFB7B50 000150 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFB7CA0 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=2
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13fffb000-0x13fffffff]
[    0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
[    0.000000]   NODE_DATA [mem 0x17fff8000-0x17fffcfff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
[    0.000000]  [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x17fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbff9afff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000]   node   1: [mem 0x140000000-0x17fffffff]
[    0.000000] On node 0 totalpages: 1048377
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10695 pages used for memmap
[    0.000000]   DMA32 zone: 782235 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
[    0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292581
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[    0.000000] Memory: 5017500K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224584K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.782 MHz processor
[    0.000157] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.56 BogoMIPS (lpj=7639128)
[    0.010795] pid_max: default: 32768 minimum: 301
[    0.015451] ACPI: Core revision 20140424
[    0.021828] ACPI: All ACPI Tables successfully acquired
[    0.027180] Security Framework initialized
[    0.031305] AppArmor: AppArmor disabled by boot time parameter
[    0.037142] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.044884] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058043] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.067791] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.074696] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.082553] Initializing cgroup subsys memory
[    0.086934] Initializing cgroup subsys devices
[    0.091404] Initializing cgroup subsys freezer
[    0.095867] Initializing cgroup subsys net_cls
[    0.100325] Initializing cgroup subsys blkio
[    0.104610] Initializing cgroup subsys perf_event
[    0.109320] Initializing cgroup subsys net_prio
[    0.113900] tseg: 0000000000
[    0.113912] CPU: Physical Processor ID: 0
[    0.117940] CPU: Processor Core ID: 0
[    0.121613] mce: CPU supports 6 MCE banks
[    0.125640] LVT offset 0 assigned for vector 0xf9
[    0.130369] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.145709] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.154714] ftrace: allocating 21601 entries in 85 pages
[    0.170135] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.215656] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.332519] Performance Events: AMD PMU driver.
[    0.337090] ... version:                0
[    0.341103] ... bit width:              48
[    0.345204] ... generic registers:      4
[    0.349221] ... value mask:             0000ffffffffffff
[    0.354531] ... max period:             00007fffffffffff
[    0.359849] ... fixed-purpose events:   0
[    0.363861] ... event mask:             000000000000000f
[    0.371767] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.379971] x86: Booting SMP configuration:
[    0.384163] .... node  #0, CPUs:      #1 #2 #3
[    0.428521] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.581231] x86: Booted up 2 nodes, 8 CPUs
[    0.585533] smpboot: Total of 8 processors activated (30557.50 BogoMIPS)
[    0.598036] devtmpfs: initialized
[    0.609989] pinctrl core: initialized pinctrl subsystem
[    0.615387] NET: Registered protocol family 16
[    0.620052] cpuidle: using governor ladder
[    0.624157] cpuidle: using governor menu
[    0.628095] node 0 link 1: io port [1000, 3fff]
[    0.628099] TOM: 00000000c0000000 aka 3072M
[    0.632290] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
[    0.632294] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.632298] node 0 link 1: mmio [f8000000, fbffffff]
[    0.632300] TOM2: 0000000180000000 aka 6144M
[    0.636579] bus: [bus 00-05] on node 0 link 1
[    0.636582] bus: 00 [io  0x0000-0xffff]
[    0.636583] bus: 00 [mem 0xd0000000-0xffffffff]
[    0.636585] bus: 00 [mem 0x180000000-0xfcffffffff]
[    0.636691] ACPI: bus type PCI registered
[    0.640712] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.647323] PCI: Using configuration type 1 for base access
[    0.652901] PCI: Using configuration type 1 for extended access
[    0.669331] ACPI: Added _OSI(Module Device)
[    0.673523] ACPI: Added _OSI(Processor Device)
[    0.677975] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.682686] ACPI: Added _OSI(Processor Aggregator Device)
[    0.691714] ACPI: Interpreter enabled
[    0.695400] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.704683] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.713947] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.723219] ACPI: (supports S0 S1 S5)
[    0.726888] ACPI: Using IOAPIC for interrupt routing
[    0.731897] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.760792] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.766982] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.775191] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.817158] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.827227] PCI host bridge to bus 0000:00
[    0.831331] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.836823] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.843008] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.849886] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.856758] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.863636] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.869833] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.870030] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.870037] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.870185] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.870196] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.870221] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.870229] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.870268] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.870376] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.870387] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.870423] pci 0000:00:02.0: supports D1 D2
[    0.870443] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.870509] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.876232] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.876242] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.876292] pci 0000:00:02.1: supports D1 D2
[    0.876308] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.876373] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.882103] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.882137] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.882173] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.889307] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.895840] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.902976] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.909617] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.909633] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.909638] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.909642] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.909647] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.909651] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.909656] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.909827] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.909837] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.909842] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.909847] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.909851] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.909856] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.909860] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.910003] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.910091] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.915818] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.915868] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.915922] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.921648] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.921704] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.921773] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.927492] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.927543] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.927597] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.933318] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.933367] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.933430] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.939168] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.939318] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.939455] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.939575] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.939722] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.939836] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.939988] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.940122] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.940252] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.940387] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.940576] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.940610] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.940622] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.940629] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.940677] pci 0000:01:04.0: supports D1 D2
[    0.940778] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.945762] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.945765] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.945768] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.945888] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.945927] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.945963] pci 0000:02:00.0: reg 0x30: [mem 0x7be00000-0x7be0ffff pref]
[    0.946026] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.946123] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.956127] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.961097] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.961189] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.961224] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.961334] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.961437] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.971435] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.976403] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.976471] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.981519] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    0.986520] pci_bus 0000:00: on NUMA node 0
[    0.986618] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    0.992786] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    0.998950] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.006292] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.013603] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.020911] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.028212] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.034348] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.040491] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.047806] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.055098] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.062436] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.068572] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.074712] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.082011] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.089309] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.096624] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.105159] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.111628] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.118093] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.124563] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.131297] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.136414] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.142085] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.150175] vgaarb: loaded
[    1.152891] vgaarb: bridge control possible 0000:01:04.0
[    1.158375] PCI: Using ACPI for IRQ routing
[    1.162572] PCI: pci_cache_line_size set to 64 bytes
[    1.162629] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.162633] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
[    1.162953] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.170003] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.175067] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.183750] Switched to clocksource hpet
[    1.199307] pnp: PnP ACPI init
[    1.202420] ACPI: bus type PNP registered
[    1.206983] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.207063] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.207161] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.207239] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.207278] pnp 00:04: [dma 2]
[    1.207320] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.207341] pnp: PnP ACPI: found 5 devices
[    1.211452] ACPI: bus type PNP unregistered
[    1.223513] pci 0000:02:00.0: can't claim BAR 6 [mem 0x7be00000-0x7be0ffff pref]: no compatible bridge window
[    1.233463] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.238439] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.244539] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.251333] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.258563] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.265790] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.270761] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.277556] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.282528] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.289320] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.294297] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.299269] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.299272] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    1.299274] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
[    1.299277] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
[    1.299279] pci_bus 0000:00: resource 8 [io  0x0000-0x0cf7]
[    1.299282] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.299285] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.299288] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.299291] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.299294] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.299435] NET: Registered protocol family 2
[    1.304316] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.312008] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.319338] TCP: Hash tables configured (established 65536 bind 65536)
[    1.325946] TCP: reno registered
[    1.329198] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.335411] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.342197] NET: Registered protocol family 1
[    1.346945] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.353019] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.358926] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.364468] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.369967] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.375556] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.381097] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.386603] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.392195] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.397736] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.403240] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.408829] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.414383] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.419885] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.425466] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.430994] pci 0000:01:04.0: Video device with shadowed ROM
[    1.431003] PCI: CLS 64 bytes, default 64
[    1.431112] Unpacking initramfs...
[    1.663837] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.671697] PCI-DMA: Disabling AGP.
[    1.676774] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    1.682359] PCI-DMA: using GART IOMMU.
[    1.686119] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.698163] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.706347] microcode: CPU0: patch_level=0x01000084
[    1.711234] microcode: CPU1: patch_level=0x01000084
[    1.716131] microcode: CPU2: patch_level=0x01000084
[    1.721031] microcode: CPU3: patch_level=0x01000084
[    1.725937] microcode: CPU4: patch_level=0x01000084
[    1.730826] microcode: CPU5: patch_level=0x01000084
[    1.735722] microcode: CPU6: patch_level=0x01000084
[    1.740617] microcode: CPU7: patch_level=0x01000084
[    1.745605] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.754411] LVT offset 1 assigned for vector 0x400
[    1.759223] IBS: LVT offset 1 assigned
[    1.763012] perf: AMD IBS detected (0x00000007)
[    1.768166] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.774558] audit: initializing netlink subsys (disabled)
[    1.779984] audit: type=2000 audit(1449102204.524:1): initialized
[    1.786865] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.793271] zbud: loaded
[    1.796183] VFS: Disk quotas dquot_6.5.2
[    1.800150] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.806695] msgmni has been set to 9945
[    1.811085] alg: No test for stdrng (krng)
[    1.815253] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.822752] io scheduler noop registered
[    1.826687] io scheduler deadline registered
[    1.831044] io scheduler cfq registered (default)
[    1.835965] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.836089] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.836216] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.836341] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.836500] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.836529] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.836554] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.836580] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.836600] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.843575] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.850110] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.850121] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.857083] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.863616] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.863627] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.870591] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.870601] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.877564] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.877593] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.883201] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.889937] GHES: HEST is not enabled!
[    1.893825] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.920418] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.948100] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.956042] Linux agpgart interface v0.103
[    1.960351] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    1.970699] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.975691] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.980978] mousedev: PS/2 mouse device common for all mice
[    1.986648] rtc_cmos rtc_cmos: RTC can wake from S4
[    1.991772] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    1.998178] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.006123] ledtrig-cpu: registered to indicate activity on CPUs
[    2.012327] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.018777] AMD IOMMUv2 functionality not available on this system
[    2.025144] TCP: cubic registered
[    2.028621] NET: Registered protocol family 10
[    2.033457] mip6: Mobile IPv6
[    2.034815] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.045048] NET: Registered protocol family 17
[    2.049501] mpls_gso: MPLS GSO support
[    2.054108] registered taskstats version 1
[    2.058963] rtc_cmos rtc_cmos: setting system clock to 2015-12-03 00:23:25 UTC (1449102205)
[    2.067385] PM: Hibernation image not present or could not be loaded.
[    2.069218] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.077074] Write protecting the kernel read-only data: 8192k
[    2.086330] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.094933] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.118918] systemd-udevd[99]: starting version 215
[    2.124661] random: systemd-udevd urandom read with 3 bits of entropy available
[    2.156244] pps_core: LinuxPPS API ver. 1 registered
[    2.161230] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.170823] ACPI: bus type USB registered
[    2.175079] usbcore: registered new interface driver usbfs
[    2.175129] PTP clock support registered
[    2.184609] usbcore: registered new interface driver hub
[    2.190182] usbcore: registered new device driver usb
[    2.190303] tg3.c:v3.137 (May 11, 2014)
[    2.190316] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.190523] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.211520] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.218633] ehci-pci: EHCI PCI platform driver
[    2.223356] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.223453] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.223470] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.223489] ehci-pci 0000:00:02.1: debug port 1
[    2.223534] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.223562] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.235435] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.235502] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.235504] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.235505] usb usb1: Product: EHCI Host Controller
[    2.235507] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.235508] usb usb1: SerialNumber: 0000:00:02.1
[    2.235771] hub 1-0:1.0: USB hub found
[    2.235780] hub 1-0:1.0: 10 ports detected
[    2.296278] ohci-pci: OHCI PCI platform driver
[    2.300971] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.306573] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.314017] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.314918] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.314921] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.314923] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.314924] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.315056] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.315244] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.403897] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.414163] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.421401] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.421403] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.421404] usb usb2: Product: OHCI PCI host controller
[    2.421406] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.421407] usb usb2: SerialNumber: 0000:00:02.0
[    2.421601] hub 2-0:1.0: USB hub found
[    2.421609] hub 2-0:1.0: 10 ports detected
[    2.461679] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.469544] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.482960] FS-Cache: Loaded
[    2.490011] RPC: Registered named UNIX socket transport module.
[    2.496620] RPC: Registered udp transport module.
[    2.502710] RPC: Registered tcp transport module.
[    2.508810] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.521163] FS-Cache: Netfs 'nfs' registered for caching
[    2.534939] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.579384] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.695243] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[    3.698987] Switched to clocksource tsc
[    4.285821] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.292352] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.299236] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.040088] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    5.053793] systemd[1]: Detected architecture 'x86-64'.
[    5.273154] systemd[1]: Inserted module 'autofs4'
[    5.279058] systemd[1]: Set hostname to <cb-test-tgt>.
[    5.364394] random: nonblocking pool is initialized
[    5.522573] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    5.535298] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    5.550685] systemd[1]: Expecting device dev-ttyS0.device...
[    5.566389] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    5.574168] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.581774] systemd[1]: Starting Remote File Systems (Pre).
[    5.598302] systemd[1]: Reached target Remote File Systems (Pre).
[    5.604427] systemd[1]: Starting Encrypted Volumes.
[    5.618272] systemd[1]: Reached target Encrypted Volumes.
[    5.623732] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    5.646269] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.655699] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    5.663758] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.671684] systemd[1]: Starting Paths.
[    5.686251] systemd[1]: Reached target Paths.
[    5.690649] systemd[1]: Starting Swap.
[    5.702261] systemd[1]: Reached target Swap.
[    5.706559] systemd[1]: Starting Root Slice.
[    5.718323] systemd[1]: Created slice Root Slice.
[    5.723101] systemd[1]: Starting User and Session Slice.
[    5.738228] systemd[1]: Created slice User and Session Slice.
[    5.743999] systemd[1]: Starting Delayed Shutdown Socket.
[    5.758244] systemd[1]: Listening on Delayed Shutdown Socket.
[    5.764005] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    5.782225] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.789204] systemd[1]: Starting Journal Socket (/dev/log).
[    5.806214] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.812176] systemd[1]: Starting udev Kernel Socket.
[    5.826295] systemd[1]: Listening on udev Kernel Socket.
[    5.831698] systemd[1]: Starting udev Control Socket.
[    5.846183] systemd[1]: Listening on udev Control Socket.
[    5.851638] systemd[1]: Starting Journal Socket.
[    5.866178] systemd[1]: Listening on Journal Socket.
[    5.871200] systemd[1]: Starting System Slice.
[    5.886175] systemd[1]: Created slice System Slice.
[    5.891078] systemd[1]: Starting system-getty.slice.
[    5.906179] systemd[1]: Created slice system-getty.slice.
[    5.911609] systemd[1]: Starting system-serial\x2dgetty.slice.
[    5.926169] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    5.932489] systemd[1]: Starting Increase datagram queue length...
[    5.951071] systemd[1]: Starting udev Coldplug all Devices...
[    6.175605] systemd[1]: Starting Load Kernel Modules...
[    6.200830] systemd[1]: Started Set Up Additional Binary Formats.
[    6.207175] systemd[1]: Mounting Debug File System...
[    6.223933] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.247545] systemd[1]: Mounting POSIX Message Queue File System...
[    6.267291] systemd[1]: Mounting Huge Pages File System...
[    6.282952] systemd[1]: Starting Slices.
[    6.294098] systemd[1]: Reached target Slices.
[    6.298626] systemd[1]: Starting Remount Root and Kernel File Systems...
[    6.326091] systemd[1]: Mounted Huge Pages File System.
[    6.342087] systemd[1]: Mounted POSIX Message Queue File System.
[    6.358020] systemd[1]: Mounted Debug File System.
[    6.374084] systemd[1]: Started Increase datagram queue length.
[    6.390029] systemd[1]: Started Load Kernel Modules.
[    6.410014] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.430068] systemd[1]: Started Remount Root and Kernel File Systems.
[    6.446028] systemd[1]: Started udev Coldplug all Devices.
[    6.491982] systemd[1]: Started Various fixups to make systemd work better on Debian.
[    6.499848] systemd[1]: Starting Load/Save Random Seed...
[    6.515116] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.535099] systemd[1]: Starting Apply Kernel Variables...
[    6.551628] systemd[1]: Mounted Configuration File System.
[    6.557233] systemd[1]: Mounted FUSE Control File System.
[    6.562651] systemd[1]: Starting Syslog Socket.
[    6.578028] systemd[1]: Listening on Syslog Socket.
[    6.583042] systemd[1]: Starting Sockets.
[    6.597994] systemd[1]: Reached target Sockets.
[    6.602615] systemd[1]: Starting Journal Service...
[    6.629963] systemd[1]: Started Journal Service.
[    6.762081] systemd-udevd[189]: starting version 215
[    7.030764] systemd-journald[188]: Received request to flush runtime journal from PID 1
[    7.468757] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    7.477181] ACPI: Power Button [PWRB]
[    7.481032] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    7.488472] ACPI: Power Button [PWRF]
[    7.492844] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    7.500734] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[    7.510385] EDAC MC: Ver: 3.0.0
[    7.510715] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.541557] FDC 0 is a post-1991 82077
[    7.607987] SCSI subsystem initialized
[    7.612129] MCE: In-kernel MCE decoding enabled.
[    7.617264] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[    7.622602] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[    7.622906] acpi-cpufreq: overriding BIOS provided _PSD data
[    7.634538] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    7.634749] AMD64 EDAC driver v3.4.0
[    7.634835] EDAC amd64: DRAM ECC enabled.
[    7.634850] EDAC amd64: F10h detected (node 0).
[    7.634875] EDAC MC: DCT0 chip selects:
[    7.634877] EDAC amd64: MC: 0:     0MB 1:     0MB
[    7.634879] EDAC amd64: MC: 2:     0MB 3:     0MB
[    7.634880] EDAC amd64: MC: 4:     0MB 5:     0MB
[    7.634881] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[    7.634883] EDAC MC: DCT1 chip selects:
[    7.634884] EDAC amd64: MC: 0:     0MB 1:     0MB
[    7.634885] EDAC amd64: MC: 2:     0MB 3:     0MB
[    7.634886] EDAC amd64: MC: 4:     0MB 5:     0MB
[    7.634887] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[    7.634888] EDAC amd64: using x4 syndromes.
[    7.634889] EDAC amd64: MCT channel count: 2
[    7.634937] EDAC amd64: CS6: Registered DDR2 RAM
[    7.634938] EDAC amd64: CS7: Registered DDR2 RAM
[    7.635270] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[    7.635347] EDAC amd64: DRAM ECC enabled.
[    7.722130] EDAC amd64: F10h detected (node 1).
[    7.726838] EDAC MC: DCT0 chip selects:
[    7.726843] EDAC amd64: MC: 0:  1024MB 1:     0MB
[    7.731582] EDAC amd64: MC: 2:     0MB 3:     0MB
[    7.736295] EDAC amd64: MC: 4:     0MB 5:     0MB
[    7.741023] EDAC amd64: MC: 6:     0MB 7:     0MB
[    7.745742] EDAC MC: DCT1 chip selects:
[    7.745745] EDAC amd64: MC: 0:     0MB 1:     0MB
[    7.750498] EDAC amd64: MC: 2:     0MB 3:     0MB
[    7.755265] EDAC amd64: MC: 4:     0MB 5:     0MB
[    7.760006] EDAC amd64: MC: 6:     0MB 7:     0MB
[    7.764745] EDAC amd64: using x4 syndromes.
[    7.768971] EDAC amd64: MCT channel count: 1
[    7.773304] EDAC amd64: CS0: Registered DDR2 RAM
[    7.778238] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[    7.789812] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[    7.802169] libata version 3.00 loaded.
[    7.813895] kvm: Nested Virtualization enabled
[    7.818500] kvm: Nested Paging enabled
[    7.823141] sata_nv 0000:00:07.0: version 3.5
[    7.823538] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    7.830108] scsi0 : sata_nv
[    7.833135] scsi1 : sata_nv
[    7.836020] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[    7.843153] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[    7.850538] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[    7.856741] scsi2 : sata_nv
[    7.859721] scsi3 : sata_nv
[    7.862574] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[    7.869715] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[    7.876972] pata_amd 0000:00:06.0: version 0.4.1
[    7.877861] scsi4 : pata_amd
[    7.881234] scsi5 : pata_amd
[    7.884234] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[    7.891198] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[    8.161386] ata1: SATA link down (SStatus 0 SControl 300)
[    8.185378] ata3: SATA link down (SStatus 0 SControl 300)
[    8.477275] ata2: SATA link down (SStatus 0 SControl 300)
[    8.793174] ata4: SATA link down (SStatus 0 SControl 300)
[   38.593663] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****