[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dffab000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9515-g6d65f79-dirty 04/28/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000160000000 aka 5632M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdffab max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
[    0.000000]  [mem 0x15fe00000-0x15fffffff] page 2M
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
[    0.000000]  [mem 0x15c000000-0x15fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
[    0.000000]  [mem 0x140000000-0x15bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdffaafff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xdfdfffff] page 2M
[    0.000000]  [mem 0xdfe00000-0xdffaafff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000DFFB40E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000DFFB68A0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000DFFB4250 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000DFFB4210 000040
[    0.000000] ACPI: SSDT 0x00000000DFFB69A0 000D57 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: APIC 0x00000000DFFB7700 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB77D0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB7948 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000DFFB7980 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB79C0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB7B38 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
[    0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[    0.000000]   NODE_DATA [mem 0x11fffb000-0x11fffffff]
[    0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
[    0.000000]   NODE_DATA [mem 0x15fff9000-0x15fffdfff]
[    0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
[    0.000000]  [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x15fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xdffaafff]
[    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
[    0.000000]   node   1: [mem 0x120000000-0x15fffffff]
[    0.000000] On node 0 totalpages: 1048393
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12487 pages used for memmap
[    0.000000]   DMA32 zone: 913323 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdffab000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
[    0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292597
[    0.000000] Policy zone: Normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xf5ea000000-0xf5ebffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
[    0.000000] Memory: 5015508K/5242148K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.735 MHz processor
[    0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.47 BogoMIPS (lpj=7638940)
[    0.010954] pid_max: default: 32768 minimum: 301
[    0.015677] ACPI: Core revision 20140424
[    0.022060] ACPI: All ACPI Tables successfully acquired
[    0.027575] Security Framework initialized
[    0.031755] AppArmor: AppArmor disabled by boot time parameter
[    0.037665] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.045467] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058767] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.068656] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.075689] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.083648] Initializing cgroup subsys memory
[    0.088113] Initializing cgroup subsys devices
[    0.092666] Initializing cgroup subsys freezer
[    0.097191] Initializing cgroup subsys net_cls
[    0.101725] Initializing cgroup subsys blkio
[    0.106082] Initializing cgroup subsys perf_event
[    0.110878] Initializing cgroup subsys net_prio
[    0.115535] tseg: 0000000000
[    0.115549] CPU: Physical Processor ID: 0
[    0.119670] CPU: Processor Core ID: 0
[    0.124474] mce: CPU supports 6 MCE banks
[    0.128619] LVT offset 0 assigned for vector 0xf9
[    0.133410] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.148888] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.158024] ftrace: allocating 21601 entries in 85 pages
[    0.173491] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.219147] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.336303] Performance Events: AMD PMU driver.
[    0.341014] ... version:                0
[    0.345116] ... bit width:              48
[    0.349296] ... generic registers:      4
[    0.353403] ... value mask:             0000ffffffffffff
[    0.358794] ... max period:             00007fffffffffff
[    0.364191] ... fixed-purpose events:   0
[    0.368295] ... event mask:             000000000000000f
[    0.376318] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.384631] x86: Booting SMP configuration:
[    0.388898] .... node  #0, CPUs:      #1 #2 #3
[    0.433485] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.585141] x86: Booted up 2 nodes, 8 CPUs
[    0.589570] smpboot: Total of 8 processors activated (30557.10 BogoMIPS)
[    0.602194] devtmpfs: initialized
[    0.614181] pinctrl core: initialized pinctrl subsystem
[    0.619662] NET: Registered protocol family 16
[    0.624406] cpuidle: using governor ladder
[    0.628584] cpuidle: using governor menu
[    0.632590] node 0 link 1: io port [1000, 3fff]
[    0.632594] TOM: 00000000e0000000 aka 3584M
[    0.636855] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.636859] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.636863] node 0 link 1: mmio [f8000000, fbffffff]
[    0.636865] TOM2: 0000000160000000 aka 5632M
[    0.641204] bus: [bus 00-05] on node 0 link 1
[    0.641206] bus: 00 [io  0x0000-0xffff]
[    0.641208] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.641209] bus: 00 [mem 0x160000000-0xfcffffffff]
[    0.641315] ACPI: bus type PCI registered
[    0.645406] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.652080] PCI: Using configuration type 1 for base access
[    0.657729] PCI: Using configuration type 1 for extended access
[    0.664347] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.670705] mtrr: probably your BIOS does not setup all CPUs.
[    0.676537] mtrr: corrected configuration.
[    0.693193] ACPI: Added _OSI(Module Device)
[    0.697491] ACPI: Added _OSI(Processor Device)
[    0.702015] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.706788] ACPI: Added _OSI(Processor Aggregator Device)
[    0.715700] ACPI: Interpreter enabled
[    0.719439] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.728907] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.738371] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.747825] ACPI: (supports S0 S1 S5)
[    0.751578] ACPI: Using IOAPIC for interrupt routing
[    0.756671] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.784793] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.791063] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.799378] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.837895] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.848019] PCI host bridge to bus 0000:00
[    0.852200] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.857763] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.864021] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.870979] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.877935] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.884210] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.884381] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.884388] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.884516] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.884524] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.884549] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.884557] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.884599] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.884703] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.884719] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.884745] pci 0000:00:02.0: supports D1 D2
[    0.884757] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.884805] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.890630] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.890642] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.890684] pci 0000:00:02.1: supports D1 D2
[    0.890703] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.890772] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.896580] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.896606] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.896634] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.903858] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.910476] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.917704] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.924431] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.924447] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.924459] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.924464] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.924469] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.924473] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.924478] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.924650] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.924660] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.924665] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.924669] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.924674] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.924678] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.924683] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.924856] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.924951] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.930741] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.930790] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.930839] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.936637] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.936693] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.936748] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.942562] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.942611] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.942662] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.948471] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.948520] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.948577] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.954395] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.954603] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.954715] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.954831] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.954973] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.955099] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.955226] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.955365] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.955501] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.955646] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.955834] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.955873] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.955888] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.955898] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.955947] pci 0000:01:04.0: supports D1 D2
[    0.956035] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.961093] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.961096] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.961100] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.961216] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.961258] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.961293] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
[    0.961385] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.961499] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.971632] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.976687] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.976797] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.976832] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.976934] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.977028] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.987155] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.992208] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.992292] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.997418] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.002508] pci_bus 0000:00: on NUMA node 0
[    1.002607] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    1.009046] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    1.015462] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.023133] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.030818] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.038465] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.046168] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.052593] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.059035] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.066686] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.074362] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.082010] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.088440] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.094864] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.102547] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.110226] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.117895] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.127018] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.133748] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.140466] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.147180] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.154215] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.159484] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.165267] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.173466] vgaarb: loaded
[    1.176269] vgaarb: bridge control possible 0000:01:04.0
[    1.181830] PCI: Using ACPI for IRQ routing
[    1.186110] PCI: pci_cache_line_size set to 64 bytes
[    1.186167] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.186170] e820: reserve RAM buffer [mem 0xdffab000-0xdfffffff]
[    1.186484] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.193619] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.198896] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.207646] Switched to clocksource hpet
[    1.223115] pnp: PnP ACPI init
[    1.226339] ACPI: bus type PNP registered
[    1.230973] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.231053] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.231152] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.231231] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.231272] pnp 00:04: [dma 2]
[    1.231314] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.231336] pnp: PnP ACPI: found 5 devices
[    1.235536] ACPI: bus type PNP unregistered
[    1.247617] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
[    1.257682] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.262732] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.268912] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.275775] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.283109] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.290464] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.295514] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.302393] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.307437] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.314312] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.319369] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.324412] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.324414] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
[    1.324418] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
[    1.324420] pci_bus 0000:00: resource 7 [io  0x0000-0x0cf7]
[    1.324423] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.324426] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.324428] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.324431] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.324434] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.324575] NET: Registered protocol family 2
[    1.329542] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.337326] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.344772] TCP: Hash tables configured (established 65536 bind 65536)
[    1.351460] TCP: reno registered
[    1.354777] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.361053] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.367910] NET: Registered protocol family 1
[    1.372759] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.378973] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.384968] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.390596] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.396174] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.401813] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.407431] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.413028] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.418686] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.424279] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.429864] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.435518] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.441118] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.446707] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.452349] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.457947] pci 0000:01:04.0: Video device with shadowed ROM
[    1.457955] PCI: CLS 64 bytes, default 64
[    1.458063] Unpacking initramfs...
[    1.691191] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.699193] PCI-DMA: Disabling AGP.
[    1.704393] PCI-DMA: aperture base @ d4000000 size 65536 KB
[    1.710068] PCI-DMA: using GART IOMMU.
[    1.713902] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.726016] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.734366] microcode: CPU0: patch_level=0x01000096
[    1.739367] microcode: CPU1: patch_level=0x01000096
[    1.744374] microcode: CPU2: patch_level=0x01000096
[    1.749387] microcode: CPU3: patch_level=0x01000096
[    1.754399] microcode: CPU4: patch_level=0x01000096
[    1.759379] microcode: CPU5: patch_level=0x01000096
[    1.764372] microcode: CPU6: patch_level=0x01000096
[    1.770473] microcode: CPU7: patch_level=0x01000096
[    1.775556] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.784495] LVT offset 1 assigned for vector 0x400
[    1.789390] IBS: LVT offset 1 assigned
[    1.793265] perf: AMD IBS detected (0x00000007)
[    1.798486] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.804983] audit: initializing netlink subsys (disabled)
[    1.810495] audit: type=2000 audit(1430216231.620:1): initialized
[    1.817399] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.823905] zbud: loaded
[    1.826868] VFS: Disk quotas dquot_6.5.2
[    1.830925] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.837564] msgmni has been set to 9941
[    1.842030] alg: No test for stdrng (krng)
[    1.846326] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.853962] io scheduler noop registered
[    1.857987] io scheduler deadline registered
[    1.862433] io scheduler cfq registered (default)
[    1.867441] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.867569] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.867712] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.867837] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.867985] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.868013] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.868039] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.868064] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.868084] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.875171] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.881790] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.881800] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.888841] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.895450] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.895461] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.902505] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.902516] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.909558] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.909587] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.915288] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.922119] GHES: HEST is not enabled!
[    1.926084] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.952864] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.980651] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.988683] Linux agpgart interface v0.103
[    1.993093] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.003493] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.008621] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.013952] mousedev: PS/2 mouse device common for all mice
[    2.019735] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.024954] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.031453] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.039435] ledtrig-cpu: registered to indicate activity on CPUs
[    2.045691] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.052208] AMD IOMMUv2 functionality not available on this system
[    2.058616] TCP: cubic registered
[    2.062183] NET: Registered protocol family 10
[    2.067138] mip6: Mobile IPv6
[    2.070225] NET: Registered protocol family 17
[    2.074831] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.083594] mpls_gso: MPLS GSO support
[    2.088323] registered taskstats version 1
[    2.093252] rtc_cmos rtc_cmos: setting system clock to 2015-04-28 10:17:13 UTC (1430216233)
[    2.101835] PM: Hibernation image not present or could not be loaded.
[    2.103681] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.111686] Write protecting the kernel read-only data: 8192k
[    2.121006] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.129753] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.150030] systemd-udevd[99]: starting version 215
[    2.155592] random: systemd-udevd urandom read with 3 bits of entropy available
[    2.178402] pps_core: LinuxPPS API ver. 1 registered
[    2.183478] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.193122] ACPI: bus type USB registered
[    2.197435] usbcore: registered new interface driver usbfs
[    2.197496] PTP clock support registered
[    2.207136] usbcore: registered new interface driver hub
[    2.212796] usbcore: registered new device driver usb
[    2.212924] tg3.c:v3.137 (May 11, 2014)
[    2.212939] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.213146] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.234382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.241568] ehci-pci: EHCI PCI platform driver
[    2.246405] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.246450] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.246467] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.246485] ehci-pci 0000:00:02.1: debug port 1
[    2.246530] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.246559] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.255324] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.255414] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.255416] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.255418] usb usb1: Product: EHCI Host Controller
[    2.255419] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.255421] usb usb1: SerialNumber: 0000:00:02.1
[    2.255791] hub 1-0:1.0: USB hub found
[    2.255802] hub 1-0:1.0: 10 ports detected
[    2.320282] ohci-pci: OHCI PCI platform driver
[    2.325082] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.330779] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.338328] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.370486] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.380917] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.390769] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.398706] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.401325] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.401327] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.401329] usb usb2: Product: OHCI PCI host controller
[    2.401330] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.401331] usb usb2: SerialNumber: 0000:00:02.0
[    2.401546] hub 2-0:1.0: USB hub found
[    2.401559] hub 2-0:1.0: 10 ports detected
[    2.443918] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.449883] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.499527] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.509909] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.519764] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.527709] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.541099] FS-Cache: Loaded
[    2.548264] RPC: Registered named UNIX socket transport module.
[    2.554983] RPC: Registered udp transport module.
[    2.561038] RPC: Registered tcp transport module.
[    2.567110] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.579532] FS-Cache: Netfs 'nfs' registered for caching
[    2.593702] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.639272] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.723143] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[    3.726890] Switched to clocksource tsc
[    4.231879] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.238564] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.245563] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.537768] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    6.551933] systemd[1]: Detected architecture 'x86-64'.
[    6.754544] random: nonblocking pool is initialized
[    6.765850] systemd[1]: Inserted module 'autofs4'
[    6.772556] systemd[1]: Set hostname to <cb-test-tgt>.
[    7.106569] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    7.119479] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    7.134877] systemd[1]: Expecting device dev-ttyS0.device...
[    7.149754] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    7.157744] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.165456] systemd[1]: Starting Remote File Systems (Pre).
[    7.181721] systemd[1]: Reached target Remote File Systems (Pre).
[    7.188077] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    7.209645] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.219221] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    7.227402] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.235436] systemd[1]: Starting Paths.
[    7.249619] systemd[1]: Reached target Paths.
[    7.254088] systemd[1]: Starting Encrypted Volumes.
[    7.269614] systemd[1]: Reached target Encrypted Volumes.
[    7.275180] systemd[1]: Starting Swap.
[    7.289589] systemd[1]: Reached target Swap.
[    7.293988] systemd[1]: Starting Root Slice.
[    7.349612] systemd[1]: Created slice Root Slice.
[    7.354475] systemd[1]: Starting User and Session Slice.
[    7.369566] systemd[1]: Created slice User and Session Slice.
[    7.375429] systemd[1]: Starting Delayed Shutdown Socket.
[    7.389597] systemd[1]: Listening on Delayed Shutdown Socket.
[    7.395513] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    7.413578] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.420697] systemd[1]: Starting Journal Socket (/dev/log).
[    7.437549] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.443612] systemd[1]: Starting Syslog Socket.
[    7.457543] systemd[1]: Listening on Syslog Socket.
[    7.463698] systemd[1]: Starting udev Kernel Socket.
[    7.477523] systemd[1]: Listening on udev Kernel Socket.
[    7.482966] systemd[1]: Starting udev Control Socket.
[    7.497519] systemd[1]: Listening on udev Control Socket.
[    7.503036] systemd[1]: Starting Journal Socket.
[    7.517579] systemd[1]: Listening on Journal Socket.
[    7.522792] systemd[1]: Starting Sockets.
[    7.537510] systemd[1]: Reached target Sockets.
[    7.542188] systemd[1]: Starting System Slice.
[    7.557509] systemd[1]: Created slice System Slice.
[    7.562530] systemd[1]: Starting system-getty.slice.
[    7.577507] systemd[1]: Created slice system-getty.slice.
[    7.583060] systemd[1]: Starting system-serial\x2dgetty.slice.
[    7.601495] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    7.608517] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.630895] systemd[1]: Mounting Debug File System...
[    7.666462] systemd[1]: Started Set Up Additional Binary Formats.
[    7.672798] systemd[1]: Mounting Huge Pages File System...
[    7.728354] systemd[1]: Starting Load Kernel Modules...
[    7.742594] systemd[1]: Mounting POSIX Message Queue File System...
[    7.758774] systemd[1]: Starting udev Coldplug all Devices...
[    7.774429] systemd[1]: Starting Journal Service...
[    7.797485] systemd[1]: Started Journal Service.
[    8.615162] systemd-udevd[184]: starting version 215
[    9.068446] systemd-journald[168]: Received request to flush runtime journal from PID 1
[    9.922647] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    9.930720] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[    9.940543] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    9.949203] ACPI: Power Button [PWRB]
[    9.949344] EDAC MC: Ver: 3.0.0
[    9.957788] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    9.966455] ACPI: Power Button [PWRF]
[    9.996586] FDC 0 is a post-1991 82077
[   10.053495] MCE: In-kernel MCE decoding enabled.
[   10.086359] SCSI subsystem initialized
[   10.090713] acpi-cpufreq: overriding BIOS provided _PSD data
[   10.096850] AMD64 EDAC driver v3.4.0
[   10.104747] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
[   10.111861] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[   10.126543] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   10.134003] libata version 3.00 loaded.
[   10.236792] kvm: Nested Virtualization enabled
[   10.241378] kvm: Nested Paging enabled
[   13.351473] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[   13.357038] EDAC amd64: DRAM ECC enabled.
[   13.357059] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.367974] EDAC amd64: F10h detected (node 0).
[   13.372685] EDAC MC: DCT0 chip selects:
[   13.372689] EDAC amd64: MC: 0:     0MB 1:     0MB
[   13.377504] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.382286] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.387066] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   13.391843] EDAC MC: DCT1 chip selects:
[   13.391846] EDAC amd64: MC: 0:     0MB 1:     0MB
[   13.396620] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.401424] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.406201] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   13.411003] EDAC amd64: using x4 syndromes.
[   13.415290] EDAC amd64: MCT channel count: 2
[   13.419710] EDAC amd64: CS6: Registered DDR2 RAM
[   13.424427] EDAC amd64: CS7: Registered DDR2 RAM
[   13.429555] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[   13.439836] pata_amd 0000:00:06.0: version 0.4.1
[   13.440705] scsi0 : pata_amd
[   13.444048] scsi1 : pata_amd
[   13.447070] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[   13.454131] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[   13.461330] sata_nv 0000:00:07.0: version 3.5
[   13.461667] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[   13.468138] scsi2 : sata_nv
[   13.471208] scsi3 : sata_nv
[   13.474178] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[   13.481401] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[   13.488907] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[   13.495227] scsi4 : sata_nv
[   13.498314] scsi5 : sata_nv
[   13.501292] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[   13.508546] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[   13.515883] EDAC amd64: DRAM ECC enabled.
[   13.520099] EDAC amd64: F10h detected (node 1).
[   13.524871] EDAC MC: DCT0 chip selects:
[   13.524892] EDAC amd64: MC: 0:  1024MB 1:     0MB
[   13.529756] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.534591] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.539373] EDAC amd64: MC: 6:     0MB 7:     0MB
[   13.544181] EDAC MC: DCT1 chip selects:
[   13.544185] EDAC amd64: MC: 0:     0MB 1:     0MB
[   13.548992] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.553800] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.558612] EDAC amd64: MC: 6:     0MB 7:     0MB
[   13.563427] EDAC amd64: using x4 syndromes.
[   13.567718] EDAC amd64: MCT channel count: 1
[   13.572204] EDAC amd64: CS0: Registered DDR2 RAM
[   13.577144] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[   13.587552] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   13.799325] ata3: SATA link down (SStatus 0 SControl 300)
[   13.827303] ata5: SATA link down (SStatus 0 SControl 300)
[   14.115209] ata4: SATA link down (SStatus 0 SControl 300)
[   14.431103] ata6: SATA link down (SStatus 0 SControl 300)