[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffa8fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dffa9000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9286-ge5d5942-dirty 04/17/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000160000000 aka 5632M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdffa9 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
[    0.000000]  [mem 0x15fe00000-0x15fffffff] page 2M
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
[    0.000000]  [mem 0x15c000000-0x15fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
[    0.000000]  [mem 0x140000000-0x15bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdffa8fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xdfdfffff] page 2M
[    0.000000]  [mem 0xdfe00000-0xdffa8fff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000DFFB20E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000DFFB48A0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000DFFB2250 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000DFFB2210 000040
[    0.000000] ACPI: SSDT 0x00000000DFFB49A0 000D57 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: APIC 0x00000000DFFB5700 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB57D0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB5948 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000DFFB5980 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB59C0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB5B38 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
[    0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[    0.000000]   NODE_DATA [mem 0x11fffb000-0x11fffffff]
[    0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
[    0.000000]   NODE_DATA [mem 0x15fff9000-0x15fffdfff]
[    0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
[    0.000000]  [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x15fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xdffa8fff]
[    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
[    0.000000]   node   1: [mem 0x120000000-0x15fffffff]
[    0.000000] On node 0 totalpages: 1048391
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12487 pages used for memmap
[    0.000000]   DMA32 zone: 913321 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdffa9000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
[    0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292595
[    0.000000] Policy zone: Normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
[    0.000000] Memory: 5015500K/5242140K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.773 MHz processor
[    0.000159] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.54 BogoMIPS (lpj=7639092)
[    0.010953] pid_max: default: 32768 minimum: 301
[    0.015676] ACPI: Core revision 20140424
[    0.022049] ACPI: All ACPI Tables successfully acquired
[    0.027549] Security Framework initialized
[    0.031728] AppArmor: AppArmor disabled by boot time parameter
[    0.037642] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.045438] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058720] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.068631] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.075651] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.083608] Initializing cgroup subsys memory
[    0.088094] Initializing cgroup subsys devices
[    0.092640] Initializing cgroup subsys freezer
[    0.097165] Initializing cgroup subsys net_cls
[    0.101710] Initializing cgroup subsys blkio
[    0.106074] Initializing cgroup subsys perf_event
[    0.110869] Initializing cgroup subsys net_prio
[    0.115527] tseg: 0000000000
[    0.115541] CPU: Physical Processor ID: 0
[    0.119661] CPU: Processor Core ID: 0
[    0.124452] mce: CPU supports 6 MCE banks
[    0.128565] LVT offset 0 assigned for vector 0xf9
[    0.133368] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.148845] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.157983] ftrace: allocating 21601 entries in 85 pages
[    0.173471] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.219117] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.336304] Performance Events: AMD PMU driver.
[    0.341026] ... version:                0
[    0.345134] ... bit width:              48
[    0.349313] ... generic registers:      4
[    0.353412] ... value mask:             0000ffffffffffff
[    0.358794] ... max period:             00007fffffffffff
[    0.364200] ... fixed-purpose events:   0
[    0.368304] ... event mask:             000000000000000f
[    0.376323] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.384640] x86: Booting SMP configuration:
[    0.388913] .... node  #0, CPUs:      #1 #2 #3
[    0.433494] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.585063] x86: Booted up 2 nodes, 8 CPUs
[    0.589491] smpboot: Total of 8 processors activated (30557.41 BogoMIPS)
[    0.602162] devtmpfs: initialized
[    0.614164] pinctrl core: initialized pinctrl subsystem
[    0.619636] NET: Registered protocol family 16
[    0.624375] cpuidle: using governor ladder
[    0.628556] cpuidle: using governor menu
[    0.632562] node 0 link 1: io port [1000, 3fff]
[    0.632566] TOM: 00000000e0000000 aka 3584M
[    0.636829] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.636833] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.636836] node 0 link 1: mmio [f8000000, fbffffff]
[    0.636838] TOM2: 0000000160000000 aka 5632M
[    0.641180] bus: [bus 00-05] on node 0 link 1
[    0.641182] bus: 00 [io  0x0000-0xffff]
[    0.641184] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.641186] bus: 00 [mem 0x160000000-0xfcffffffff]
[    0.641292] ACPI: bus type PCI registered
[    0.645380] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.652059] PCI: Using configuration type 1 for base access
[    0.657710] PCI: Using configuration type 1 for extended access
[    0.664326] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.670688] mtrr: probably your BIOS does not setup all CPUs.
[    0.676511] mtrr: corrected configuration.
[    0.693189] ACPI: Added _OSI(Module Device)
[    0.697491] ACPI: Added _OSI(Processor Device)
[    0.702013] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.706796] ACPI: Added _OSI(Processor Aggregator Device)
[    0.715691] ACPI: Interpreter enabled
[    0.719427] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.728898] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.738354] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.747808] ACPI: (supports S0 S1 S5)
[    0.751541] ACPI: Using IOAPIC for interrupt routing
[    0.756633] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.785640] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.791911] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.800228] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.838608] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.848729] PCI host bridge to bus 0000:00
[    0.852923] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.858484] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.864748] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.871706] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.878663] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.884938] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.885114] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.885121] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.885249] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.885260] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.885284] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.885293] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.885317] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.885421] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.885435] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.885464] pci 0000:00:02.0: supports D1 D2
[    0.885492] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.885554] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.891364] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.891377] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.891409] pci 0000:00:02.1: supports D1 D2
[    0.891411] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.891463] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.897277] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.897303] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.897331] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.904551] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.911169] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.918395] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.925133] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.925144] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.925149] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.925153] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.925158] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.925162] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.925167] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.925351] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.925360] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.925365] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.925370] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.925374] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.925379] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.925384] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.925557] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.925680] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.931495] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.931544] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.931593] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.937405] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.937476] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.937540] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.943355] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.943400] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.943447] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.949250] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.949299] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.949356] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.955176] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.955350] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.955468] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.955584] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.955724] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.955870] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.956000] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.956117] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.956220] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.956384] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.956576] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.956595] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.956606] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.956612] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.956660] pci 0000:01:04.0: supports D1 D2
[    0.956773] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.961837] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.961840] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.961843] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.961966] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.962004] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.962040] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
[    0.962125] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.962210] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.972342] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.977406] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.977513] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.977545] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.977651] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.977750] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.987881] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.992924] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.992993] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.998114] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.003186] pci_bus 0000:00: on NUMA node 0
[    1.003290] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    1.009715] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    1.016132] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.023809] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.031520] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.039200] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.046879] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.053291] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.059719] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.067376] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.075030] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.082689] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.089099] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.095522] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.103208] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.110863] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.118535] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.127651] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.134375] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.141096] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.147806] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.154789] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.160056] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.165836] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.174040] vgaarb: loaded
[    1.176825] vgaarb: bridge control possible 0000:01:04.0
[    1.182385] PCI: Using ACPI for IRQ routing
[    1.186665] PCI: pci_cache_line_size set to 64 bytes
[    1.186722] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.186725] e820: reserve RAM buffer [mem 0xdffa9000-0xdfffffff]
[    1.187039] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.194175] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.199460] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.208208] Switched to clocksource hpet
[    1.223726] pnp: PnP ACPI init
[    1.226945] ACPI: bus type PNP registered
[    1.231576] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.231655] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.231752] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.231831] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.231871] pnp 00:04: [dma 2]
[    1.231913] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.231934] pnp: PnP ACPI: found 5 devices
[    1.236128] ACPI: bus type PNP unregistered
[    1.248185] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
[    1.258242] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.263295] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.269479] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.276350] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.283689] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.291053] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.296103] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.302981] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.308024] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.314893] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.319956] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.325009] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.325012] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
[    1.325015] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
[    1.325018] pci_bus 0000:00: resource 7 [io  0x0000-0x0cf7]
[    1.325021] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.325023] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.325025] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.325028] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.325031] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.325163] NET: Registered protocol family 2
[    1.330122] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.337908] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.345326] TCP: Hash tables configured (established 65536 bind 65536)
[    1.352013] TCP: reno registered
[    1.355333] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.361606] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.368469] NET: Registered protocol family 1
[    1.373318] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.379512] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.385497] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.391109] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.396693] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.402352] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.407992] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.413587] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.419246] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.424851] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.430438] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.436095] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.441705] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.447297] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.452947] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.458560] pci 0000:01:04.0: Video device with shadowed ROM
[    1.458569] PCI: CLS 64 bytes, default 64
[    1.458677] Unpacking initramfs...
[    1.691666] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.699645] PCI-DMA: Disabling AGP.
[    1.704842] PCI-DMA: aperture base @ d4000000 size 65536 KB
[    1.710509] PCI-DMA: using GART IOMMU.
[    1.714348] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.726442] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.734790] microcode: CPU0: patch_level=0x01000096
[    1.739791] microcode: CPU1: patch_level=0x01000096
[    1.744799] microcode: CPU2: patch_level=0x01000096
[    1.749811] microcode: CPU3: patch_level=0x01000096
[    1.754821] microcode: CPU4: patch_level=0x01000096
[    1.759818] microcode: CPU5: patch_level=0x01000096
[    1.764810] microcode: CPU6: patch_level=0x01000096
[    1.770915] microcode: CPU7: patch_level=0x01000096
[    1.776015] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.784936] LVT offset 1 assigned for vector 0x400
[    1.789823] IBS: LVT offset 1 assigned
[    1.793692] perf: AMD IBS detected (0x00000007)
[    1.798916] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.805410] audit: initializing netlink subsys (disabled)
[    1.810929] audit: type=2000 audit(1429262021.628:1): initialized
[    1.817842] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.824345] zbud: loaded
[    1.827306] VFS: Disk quotas dquot_6.5.2
[    1.831350] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.837987] msgmni has been set to 9941
[    1.842449] alg: No test for stdrng (krng)
[    1.846749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.854388] io scheduler noop registered
[    1.858410] io scheduler deadline registered
[    1.862859] io scheduler cfq registered (default)
[    1.867861] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.867997] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.868126] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.868253] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.868404] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.868432] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.868458] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.868484] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.868504] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.875595] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.882213] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.882223] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.889267] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.895875] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.895886] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.902928] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.902939] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.909981] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.910011] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.915690] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.922518] GHES: HEST is not enabled!
[    1.926481] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.953255] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.981065] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.989090] Linux agpgart interface v0.103
[    1.993501] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.004019] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.009137] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.014462] mousedev: PS/2 mouse device common for all mice
[    2.020247] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.025454] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.031988] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.039951] ledtrig-cpu: registered to indicate activity on CPUs
[    2.046219] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.052761] AMD IOMMUv2 functionality not available on this system
[    2.059161] TCP: cubic registered
[    2.062719] NET: Registered protocol family 10
[    2.067680] mip6: Mobile IPv6
[    2.070748] NET: Registered protocol family 17
[    2.075364] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.084133] mpls_gso: MPLS GSO support
[    2.088889] registered taskstats version 1
[    2.093819] rtc_cmos rtc_cmos: setting system clock to 2015-04-17 09:13:43 UTC (1429262023)
[    2.102405] PM: Hibernation image not present or could not be loaded.
[    2.104262] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.112257] Write protecting the kernel read-only data: 8192k
[    2.121570] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.130313] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.150410] systemd-udevd[99]: starting version 215
[    2.155944] random: systemd-udevd urandom read with 4 bits of entropy available
[    2.179048] pps_core: LinuxPPS API ver. 1 registered
[    2.179169] ACPI: bus type USB registered
[    2.179220] usbcore: registered new interface driver usbfs
[    2.179240] usbcore: registered new interface driver hub
[    2.179351] usbcore: registered new device driver usb
[    2.204271] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.214206] PTP clock support registered
[    2.218529] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.225562] tg3.c:v3.137 (May 11, 2014)
[    2.229551] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.235483] ehci-pci: EHCI PCI platform driver
[    2.235577] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.246100] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.246189] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.246204] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.246222] ehci-pci 0000:00:02.1: debug port 1
[    2.246266] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.246293] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.255892] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.255959] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.255961] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.255963] usb usb1: Product: EHCI Host Controller
[    2.255964] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.255965] usb usb1: SerialNumber: 0000:00:02.1
[    2.256309] hub 1-0:1.0: USB hub found
[    2.256320] hub 1-0:1.0: 10 ports detected
[    2.320083] ohci-pci: OHCI PCI platform driver
[    2.324880] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.330578] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.338134] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.367087] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.377525] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.387377] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.395311] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.401886] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.401888] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.401889] usb usb2: Product: OHCI PCI host controller
[    2.401891] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.401892] usb usb2: SerialNumber: 0000:00:02.0
[    2.402102] hub 2-0:1.0: USB hub found
[    2.402114] hub 2-0:1.0: 10 ports detected
[    2.440496] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.446488] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.504229] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.514656] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.524519] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.532490] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.545894] FS-Cache: Loaded
[    2.553110] RPC: Registered named UNIX socket transport module.
[    2.559764] RPC: Registered udp transport module.
[    2.565850] RPC: Registered tcp transport module.
[    2.571930] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.584322] FS-Cache: Netfs 'nfs' registered for caching
[    2.598177] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.643834] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.723706] tsc: Refined TSC clocksource calibration: 1909.787 MHz
[    3.727445] Switched to clocksource tsc
[    4.236352] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.243008] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.249990] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.654205] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    5.668388] systemd[1]: Detected architecture 'x86-64'.
[    6.046780] systemd[1]: Inserted module 'autofs4'
[    6.053738] systemd[1]: Set hostname to <cb-test-tgt>.
[    6.073734] random: nonblocking pool is initialized
[    6.508205] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    6.521108] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    6.536468] systemd[1]: Expecting device dev-ttyS0.device...
[    6.550536] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.558531] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.566253] systemd[1]: Starting Remote File Systems (Pre).
[    6.582499] systemd[1]: Reached target Remote File Systems (Pre).
[    6.588865] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.610397] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.619942] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.628120] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.636156] systemd[1]: Starting Paths.
[    6.650471] systemd[1]: Reached target Paths.
[    6.655020] systemd[1]: Starting Encrypted Volumes.
[    6.670377] systemd[1]: Reached target Encrypted Volumes.
[    6.675901] systemd[1]: Starting Swap.
[    6.690387] systemd[1]: Reached target Swap.
[    6.694784] systemd[1]: Starting Root Slice.
[    6.714394] systemd[1]: Created slice Root Slice.
[    6.719279] systemd[1]: Starting User and Session Slice.
[    6.734362] systemd[1]: Created slice User and Session Slice.
[    6.740241] systemd[1]: Starting Delayed Shutdown Socket.
[    6.754371] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.760247] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.778342] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.785466] systemd[1]: Starting Journal Socket (/dev/log).
[    6.802348] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.808442] systemd[1]: Starting Syslog Socket.
[    6.822323] systemd[1]: Listening on Syslog Socket.
[    6.828443] systemd[1]: Starting udev Kernel Socket.
[    6.842338] systemd[1]: Listening on udev Kernel Socket.
[    6.847783] systemd[1]: Starting udev Control Socket.
[    6.862339] systemd[1]: Listening on udev Control Socket.
[    6.867875] systemd[1]: Starting Journal Socket.
[    6.882304] systemd[1]: Listening on Journal Socket.
[    6.887448] systemd[1]: Starting Sockets.
[    6.902296] systemd[1]: Reached target Sockets.
[    6.906983] systemd[1]: Starting System Slice.
[    6.922289] systemd[1]: Created slice System Slice.
[    6.927298] systemd[1]: Starting system-getty.slice.
[    6.942286] systemd[1]: Created slice system-getty.slice.
[    6.947840] systemd[1]: Starting system-serial\x2dgetty.slice.
[    6.966276] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    6.973808] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.999415] systemd[1]: Mounting Debug File System...
[    7.051327] systemd[1]: Started Set Up Additional Binary Formats.
[    7.057646] systemd[1]: Mounting Huge Pages File System...
[    7.152935] systemd[1]: Starting Load Kernel Modules...
[    7.167616] systemd[1]: Mounting POSIX Message Queue File System...
[    7.187059] systemd[1]: Starting udev Coldplug all Devices...
[    7.202985] systemd[1]: Starting Journal Service...
[    7.230255] systemd[1]: Started Journal Service.
[    8.169494] systemd-udevd[187]: starting version 215
[    8.512270] systemd-journald[167]: Received request to flush runtime journal from PID 1
[    9.156444] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    9.164414] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[    9.180721] EDAC MC: Ver: 3.0.0
[    9.189168] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    9.197666] ACPI: Power Button [PWRB]
[    9.201651] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    9.209208] ACPI: Power Button [PWRF]
[    9.233450] FDC 0 is a post-1991 82077
[    9.312994] SCSI subsystem initialized
[    9.317215] MCE: In-kernel MCE decoding enabled.
[    9.322381] acpi-cpufreq: overriding BIOS provided _PSD data
[    9.337634] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
[    9.344771] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[    9.367304] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    9.367335] libata version 3.00 loaded.
[    9.375131] AMD64 EDAC driver v3.4.0
[    9.555383] kvm: Nested Virtualization enabled
[    9.559960] kvm: Nested Paging enabled
[   12.580310] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[   12.585844] EDAC amd64: DRAM ECC enabled.
[   12.590030] EDAC amd64: F10h detected (node 0).
[   12.594753] EDAC MC: DCT0 chip selects:
[   12.594756] EDAC amd64: MC: 0:     0MB 1:     0MB
[   12.599586] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.604379] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.609185] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   12.613988] EDAC MC: DCT1 chip selects:
[   12.614000] EDAC amd64: MC: 0:     0MB 1:     0MB
[   12.618806] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.623602] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.628407] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   12.633240] EDAC amd64: using x4 syndromes.
[   12.637520] EDAC amd64: MCT channel count: 2
[   12.641947] EDAC amd64: CS6: Registered DDR2 RAM
[   12.646665] EDAC amd64: CS7: Registered DDR2 RAM
[   12.651809] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[   12.661719] pata_amd 0000:00:06.0: version 0.4.1
[   12.662576] scsi0 : pata_amd
[   12.665866] scsi1 : pata_amd
[   12.668952] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[   12.676020] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[   12.683181] sata_nv 0000:00:07.0: version 3.5
[   12.683520] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[   12.689925] scsi2 : sata_nv
[   12.693215] scsi3 : sata_nv
[   12.696208] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[   12.703453] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[   12.710942] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[   12.717296] scsi4 : sata_nv
[   12.720385] scsi5 : sata_nv
[   12.723348] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[   12.730578] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[   12.737904] EDAC amd64: DRAM ECC enabled.
[   12.737950] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.748919] EDAC amd64: F10h detected (node 1).
[   12.753698] EDAC MC: DCT0 chip selects:
[   12.753702] EDAC amd64: MC: 0:  1024MB 1:     0MB
[   12.758514] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.763312] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.768102] EDAC amd64: MC: 6:     0MB 7:     0MB
[   12.772880] EDAC MC: DCT1 chip selects:
[   12.772882] EDAC amd64: MC: 0:     0MB 1:     0MB
[   12.777663] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.782459] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.787236] EDAC amd64: MC: 6:     0MB 7:     0MB
[   12.792047] EDAC amd64: using x4 syndromes.
[   12.796326] EDAC amd64: MCT channel count: 1
[   12.800785] EDAC amd64: CS0: Registered DDR2 RAM
[   12.805831] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[   12.815744] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   13.020139] ata3: SATA link down (SStatus 0 SControl 300)
[   13.048157] ata5: SATA link down (SStatus 0 SControl 300)
[   13.336036] ata4: SATA link down (SStatus 0 SControl 300)
[   13.651941] ata6: SATA link down (SStatus 0 SControl 300)