[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffa8fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dffa9000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-8858-ge19c8b0-dirty 04/05/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000160000000 aka 5632M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdffa9 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
[    0.000000]  [mem 0x15fe00000-0x15fffffff] page 2M
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
[    0.000000]  [mem 0x15c000000-0x15fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
[    0.000000]  [mem 0x140000000-0x15bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdffa8fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xdfdfffff] page 2M
[    0.000000]  [mem 0xdfe00000-0xdffa8fff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000DFFB20E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000DFFB48A0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000DFFB2250 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000DFFB2210 000040
[    0.000000] ACPI: SSDT 0x00000000DFFB49A0 000D57 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: APIC 0x00000000DFFB5700 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB57D0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB5948 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000DFFB5980 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB59C0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB5B38 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
[    0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[    0.000000]   NODE_DATA [mem 0x11fffb000-0x11fffffff]
[    0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
[    0.000000]   NODE_DATA [mem 0x15fff9000-0x15fffdfff]
[    0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
[    0.000000]  [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x15fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xdffa8fff]
[    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
[    0.000000]   node   1: [mem 0x120000000-0x15fffffff]
[    0.000000] On node 0 totalpages: 1048391
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12487 pages used for memmap
[    0.000000]   DMA32 zone: 913321 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdffa9000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
[    0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292595
[    0.000000] Policy zone: Normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xe5ea000000-0xe5ebffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
[    0.000000] Memory: 5015500K/5242140K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.802 MHz processor
[    0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.60 BogoMIPS (lpj=7639208)
[    0.010962] pid_max: default: 32768 minimum: 301
[    0.015684] ACPI: Core revision 20140424
[    0.022075] ACPI: All ACPI Tables successfully acquired
[    0.027593] Security Framework initialized
[    0.031771] AppArmor: AppArmor disabled by boot time parameter
[    0.037681] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.045493] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058754] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.068657] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.075672] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.083628] Initializing cgroup subsys memory
[    0.088088] Initializing cgroup subsys devices
[    0.092632] Initializing cgroup subsys freezer
[    0.097156] Initializing cgroup subsys net_cls
[    0.101691] Initializing cgroup subsys blkio
[    0.106057] Initializing cgroup subsys perf_event
[    0.110852] Initializing cgroup subsys net_prio
[    0.115509] tseg: 0000000000
[    0.115523] CPU: Physical Processor ID: 0
[    0.119644] CPU: Processor Core ID: 0
[    0.124446] mce: CPU supports 6 MCE banks
[    0.128583] LVT offset 0 assigned for vector 0xf9
[    0.133374] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.148854] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.157987] ftrace: allocating 21601 entries in 85 pages
[    0.173437] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.219093] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.336311] Performance Events: AMD PMU driver.
[    0.341022] ... version:                0
[    0.345103] ... bit width:              48
[    0.349278] ... generic registers:      4
[    0.353357] ... value mask:             0000ffffffffffff
[    0.358752] ... max period:             00007fffffffffff
[    0.364132] ... fixed-purpose events:   0
[    0.368209] ... event mask:             000000000000000f
[    0.376190] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.384513] x86: Booting SMP configuration:
[    0.388786] .... node  #0, CPUs:      #1 #2 #3
[    0.433347] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.585072] x86: Booted up 2 nodes, 8 CPUs
[    0.589533] smpboot: Total of 8 processors activated (30557.62 BogoMIPS)
[    0.602164] devtmpfs: initialized
[    0.614167] pinctrl core: initialized pinctrl subsystem
[    0.619643] NET: Registered protocol family 16
[    0.624375] cpuidle: using governor ladder
[    0.628549] cpuidle: using governor menu
[    0.632555] node 0 link 1: io port [1000, 3fff]
[    0.632558] TOM: 00000000e0000000 aka 3584M
[    0.636817] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.636821] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.636824] node 0 link 1: mmio [f8000000, fbffffff]
[    0.636827] TOM2: 0000000160000000 aka 5632M
[    0.641169] bus: [bus 00-05] on node 0 link 1
[    0.641171] bus: 00 [io  0x0000-0xffff]
[    0.641172] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.641174] bus: 00 [mem 0x160000000-0xfcffffffff]
[    0.641280] ACPI: bus type PCI registered
[    0.645363] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.652038] PCI: Using configuration type 1 for base access
[    0.657683] PCI: Using configuration type 1 for extended access
[    0.664296] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.670651] mtrr: probably your BIOS does not setup all CPUs.
[    0.676476] mtrr: corrected configuration.
[    0.693189] ACPI: Added _OSI(Module Device)
[    0.697489] ACPI: Added _OSI(Processor Device)
[    0.702013] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.706796] ACPI: Added _OSI(Processor Aggregator Device)
[    0.715687] ACPI: Interpreter enabled
[    0.719432] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.728907] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.738354] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.747799] ACPI: (supports S0 S1 S5)
[    0.751532] ACPI: Using IOAPIC for interrupt routing
[    0.756617] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.784972] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.791236] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.799558] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.837224] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.847359] PCI host bridge to bus 0000:00
[    0.851533] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.857088] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.863345] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.870296] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.877252] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.883517] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.883709] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.883717] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.883836] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.883847] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.883872] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.883880] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.883922] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.884027] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.884043] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.884069] pci 0000:00:02.0: supports D1 D2
[    0.884081] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.884129] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.889953] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.889966] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.890008] pci 0000:00:02.1: supports D1 D2
[    0.890027] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.890095] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.895903] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.895929] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.895957] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.903183] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.909800] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.917027] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.923744] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.923756] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.923761] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.923765] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.923770] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.923775] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.923779] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.923950] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.923959] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.923964] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.923969] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.923973] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.923978] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.923983] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.924143] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.924224] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.930041] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.930090] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.930139] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.935950] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.936021] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.936082] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.941889] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.941941] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.941992] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.947785] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.947834] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.947891] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.953710] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.953861] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.953970] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.954084] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.954210] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.954324] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.954452] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.954600] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.954726] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.954888] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.955070] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.955089] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.955099] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.955106] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.955154] pci 0000:01:04.0: supports D1 D2
[    0.955250] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.960314] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.960318] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.960321] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.960441] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.960483] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.960519] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
[    0.960607] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.960728] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.970852] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.975910] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.976016] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.976048] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.976157] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.976237] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.986358] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.991414] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.991499] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.996616] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.001702] pci_bus 0000:00: on NUMA node 0
[    1.001801] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    1.008231] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    1.014666] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.022345] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.030028] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.037699] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.045352] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.051776] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.058211] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.065862] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.073522] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.081162] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.087580] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.093990] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.101643] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.109298] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.116972] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.126072] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.132800] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.139510] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.146240] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.153246] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.158510] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.164297] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.172487] vgaarb: loaded
[    1.175284] vgaarb: bridge control possible 0000:01:04.0
[    1.180851] PCI: Using ACPI for IRQ routing
[    1.185130] PCI: pci_cache_line_size set to 64 bytes
[    1.185188] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.185191] e820: reserve RAM buffer [mem 0xdffa9000-0xdfffffff]
[    1.185505] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.192634] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.197916] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.206646] Switched to clocksource hpet
[    1.222158] pnp: PnP ACPI init
[    1.225376] ACPI: bus type PNP registered
[    1.230009] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.230088] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.230186] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.230265] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.230306] pnp 00:04: [dma 2]
[    1.230347] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.230369] pnp: PnP ACPI: found 5 devices
[    1.234564] ACPI: bus type PNP unregistered
[    1.246627] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
[    1.256693] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.261743] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.267927] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.274795] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.282130] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.289492] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.294536] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.301413] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.306456] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.313324] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.318380] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.323431] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.323433] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
[    1.323437] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
[    1.323439] pci_bus 0000:00: resource 7 [io  0x0000-0x0cf7]
[    1.323442] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.323445] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.323447] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.323450] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.323453] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.323586] NET: Registered protocol family 2
[    1.328545] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.336353] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.343768] TCP: Hash tables configured (established 65536 bind 65536)
[    1.350453] TCP: reno registered
[    1.353774] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.360048] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.366912] NET: Registered protocol family 1
[    1.371737] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.377937] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.383925] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.389535] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.395126] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.400783] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.406410] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.411987] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.417645] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.423241] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.428826] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.434488] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.440096] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.445685] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.451345] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.456932] pci 0000:01:04.0: Video device with shadowed ROM
[    1.456940] PCI: CLS 64 bytes, default 64
[    1.457049] Unpacking initramfs...
[    1.689870] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.697872] PCI-DMA: Disabling AGP.
[    1.703080] PCI-DMA: aperture base @ d4000000 size 65536 KB
[    1.708772] PCI-DMA: using GART IOMMU.
[    1.712616] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.724721] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.733063] microcode: CPU0: patch_level=0x01000096
[    1.738066] microcode: CPU1: patch_level=0x01000096
[    1.743074] microcode: CPU2: patch_level=0x01000096
[    1.748086] microcode: CPU3: patch_level=0x01000096
[    1.753096] microcode: CPU4: patch_level=0x01000096
[    1.758076] microcode: CPU5: patch_level=0x01000096
[    1.763068] microcode: CPU6: patch_level=0x01000096
[    1.769176] microcode: CPU7: patch_level=0x01000096
[    1.774275] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.783210] LVT offset 1 assigned for vector 0x400
[    1.788129] IBS: LVT offset 1 assigned
[    1.792000] perf: AMD IBS detected (0x00000007)
[    1.797223] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.803700] audit: initializing netlink subsys (disabled)
[    1.809226] audit: type=2000 audit(1428203627.620:1): initialized
[    1.816136] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.822638] zbud: loaded
[    1.825597] VFS: Disk quotas dquot_6.5.2
[    1.829647] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.836289] msgmni has been set to 9941
[    1.840751] alg: No test for stdrng (krng)
[    1.845039] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.852680] io scheduler noop registered
[    1.856714] io scheduler deadline registered
[    1.861147] io scheduler cfq registered (default)
[    1.866152] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.866279] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.866419] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.866531] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.866679] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.866707] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.866732] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.866758] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.866778] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.873860] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.880480] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.880491] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.887534] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.894143] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.894153] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.901196] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.901207] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.908247] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.908277] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.913971] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.920802] GHES: HEST is not enabled!
[    1.924767] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.951567] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.979355] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.987413] Linux agpgart interface v0.103
[    1.991823] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.002291] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.007457] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.012811] mousedev: PS/2 mouse device common for all mice
[    2.018586] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.023777] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.030257] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.038218] ledtrig-cpu: registered to indicate activity on CPUs
[    2.044481] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.051002] AMD IOMMUv2 functionality not available on this system
[    2.057412] TCP: cubic registered
[    2.060959] NET: Registered protocol family 10
[    2.065922] mip6: Mobile IPv6
[    2.067489] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.077720] NET: Registered protocol family 17
[    2.082266] mpls_gso: MPLS GSO support
[    2.086952] registered taskstats version 1
[    2.091880] rtc_cmos rtc_cmos: setting system clock to 2015-04-05 03:13:49 UTC (1428203629)
[    2.100473] PM: Hibernation image not present or could not be loaded.
[    2.102285] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.110307] Write protecting the kernel read-only data: 8192k
[    2.119631] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.128380] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.148512] systemd-udevd[98]: starting version 215
[    2.154040] random: systemd-udevd urandom read with 3 bits of entropy available
[    2.177509] pps_core: LinuxPPS API ver. 1 registered
[    2.177550] ACPI: bus type USB registered
[    2.177610] usbcore: registered new interface driver usbfs
[    2.177628] usbcore: registered new interface driver hub
[    2.178070] usbcore: registered new device driver usb
[    2.202746] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.212723] PTP clock support registered
[    2.217139] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.224139] tg3.c:v3.137 (May 11, 2014)
[    2.228131] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.234064] ehci-pci: EHCI PCI platform driver
[    2.234160] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.244896] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.250284] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.250328] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.264137] ehci-pci 0000:00:02.1: debug port 1
[    2.268820] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.268854] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.286299] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.292218] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.299096] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.306456] usb usb1: Product: EHCI Host Controller
[    2.309826] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.309829] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.309831] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.309833] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.309934] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.310077] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.357832] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.364007] usb usb1: SerialNumber: 0000:00:02.1
[    2.368927] hub 1-0:1.0: USB hub found
[    2.372795] hub 1-0:1.0: 10 ports detected
[    2.377915] ohci-pci: OHCI PCI platform driver
[    2.382701] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.388402] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.395961] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.422663] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.433114] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.442982] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.450922] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.456307] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.456309] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.456311] usb usb2: Product: OHCI PCI host controller
[    2.456312] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.456313] usb usb2: SerialNumber: 0000:00:02.0
[    2.456601] hub 2-0:1.0: USB hub found
[    2.456612] hub 2-0:1.0: 10 ports detected
[    2.502788] FS-Cache: Loaded
[    2.509967] RPC: Registered named UNIX socket transport module.
[    2.516634] RPC: Registered udp transport module.
[    2.522716] RPC: Registered tcp transport module.
[    2.528773] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.541384] FS-Cache: Netfs 'nfs' registered for caching
[    2.555110] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.602230] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.722137] tsc: Refined TSC clocksource calibration: 1909.787 MHz
[    3.725878] Switched to clocksource tsc
[    4.179356] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.186008] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.193007] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    7.102452] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    7.116633] systemd[1]: Detected architecture 'x86-64'.
[    7.385979] random: nonblocking pool is initialized
[    7.540990] systemd[1]: Inserted module 'autofs4'
[    7.547824] systemd[1]: Set hostname to <cb-test-tgt>.
[    8.166516] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    8.179415] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    8.194806] systemd[1]: Expecting device dev-ttyS0.device...
[    8.208394] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    8.216398] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.224113] systemd[1]: Starting Remote File Systems (Pre).
[    8.240354] systemd[1]: Reached target Remote File Systems (Pre).
[    8.246735] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    8.268268] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.277813] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    8.285997] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    8.294070] systemd[1]: Starting Paths.
[    8.308251] systemd[1]: Reached target Paths.
[    8.312733] systemd[1]: Starting Encrypted Volumes.
[    8.328260] systemd[1]: Reached target Encrypted Volumes.
[    8.333809] systemd[1]: Starting Swap.
[    8.348227] systemd[1]: Reached target Swap.
[    8.352613] systemd[1]: Starting Root Slice.
[    8.376227] systemd[1]: Created slice Root Slice.
[    8.381187] systemd[1]: Starting User and Session Slice.
[    8.396213] systemd[1]: Created slice User and Session Slice.
[    8.402064] systemd[1]: Starting Delayed Shutdown Socket.
[    8.416202] systemd[1]: Listening on Delayed Shutdown Socket.
[    8.422063] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    8.440192] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.447293] systemd[1]: Starting Journal Socket (/dev/log).
[    8.464181] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.470219] systemd[1]: Starting Syslog Socket.
[    8.484225] systemd[1]: Listening on Syslog Socket.
[    8.490368] systemd[1]: Starting udev Kernel Socket.
[    8.504170] systemd[1]: Listening on udev Kernel Socket.
[    8.509611] systemd[1]: Starting udev Control Socket.
[    8.524158] systemd[1]: Listening on udev Control Socket.
[    8.529703] systemd[1]: Starting Journal Socket.
[    8.544152] systemd[1]: Listening on Journal Socket.
[    8.549258] systemd[1]: Starting Sockets.
[    8.564195] systemd[1]: Reached target Sockets.
[    8.568943] systemd[1]: Starting System Slice.
[    8.584150] systemd[1]: Created slice System Slice.
[    8.589184] systemd[1]: Starting system-getty.slice.
[    8.604147] systemd[1]: Created slice system-getty.slice.
[    8.609680] systemd[1]: Starting system-serial\x2dgetty.slice.
[    8.628131] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    8.635176] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.657557] systemd[1]: Mounting Debug File System...
[    8.686479] systemd[1]: Started Set Up Additional Binary Formats.
[    8.692742] systemd[1]: Mounting Huge Pages File System...
[    8.738673] systemd[1]: Starting Load Kernel Modules...
[    8.753273] systemd[1]: Mounting POSIX Message Queue File System...
[    8.768998] systemd[1]: Starting udev Coldplug all Devices...
[    8.784976] systemd[1]: Starting Journal Service...
[    8.808157] systemd[1]: Started Journal Service.
[   10.099577] systemd-udevd[185]: starting version 215
[   10.143311] systemd-journald[166]: Received request to flush runtime journal from PID 1
[   11.171435] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[   11.180207] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[   11.189378] EDAC MC: Ver: 3.0.0
[   11.193120] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[   11.201629] ACPI: Power Button [PWRB]
[   11.205587] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   11.213113] ACPI: Power Button [PWRF]
[   11.235134] FDC 0 is a post-1991 82077
[   11.253689] SCSI subsystem initialized
[   11.317632] MCE: In-kernel MCE decoding enabled.
[   11.355284] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
[   11.362382] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[   11.392118] libata version 3.00 loaded.
[   11.395742] acpi-cpufreq: overriding BIOS provided _PSD data
[   11.403848] AMD64 EDAC driver v3.4.0
[   11.409198] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   11.623542] kvm: Nested Virtualization enabled
[   11.628124] kvm: Nested Paging enabled
[   14.606046] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[   14.611544] EDAC amd64: DRAM ECC enabled.
[   14.611563] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.623052] EDAC amd64: F10h detected (node 0).
[   14.627951] EDAC MC: DCT0 chip selects:
[   14.627955] EDAC amd64: MC: 0:     0MB 1:     0MB
[   14.632747] EDAC amd64: MC: 2:     0MB 3:     0MB
[   14.637461] EDAC amd64: MC: 4:     0MB 5:     0MB
[   14.642260] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   14.647047] EDAC MC: DCT1 chip selects:
[   14.647049] EDAC amd64: MC: 0:     0MB 1:     0MB
[   14.651904] EDAC amd64: MC: 2:     0MB 3:     0MB
[   14.658009] EDAC amd64: MC: 4:     0MB 5:     0MB
[   14.664123] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   14.670221] EDAC amd64: using x4 syndromes.
[   14.675784] EDAC amd64: MCT channel count: 2
[   14.680313] EDAC amd64: CS6: Registered DDR2 RAM
[   14.685051] EDAC amd64: CS7: Registered DDR2 RAM
[   14.690284] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[   14.700261] EDAC amd64: DRAM ECC enabled.
[   14.704378] EDAC amd64: F10h detected (node 1).
[   14.709032] EDAC MC: DCT0 chip selects:
[   14.709034] EDAC amd64: MC: 0:  1024MB 1:     0MB
[   14.713835] EDAC amd64: MC: 2:     0MB 3:     0MB
[   14.718629] EDAC amd64: MC: 4:     0MB 5:     0MB
[   14.723411] EDAC amd64: MC: 6:     0MB 7:     0MB
[   14.728188] EDAC MC: DCT1 chip selects:
[   14.728196] EDAC amd64: MC: 0:     0MB 1:     0MB
[   14.732988] EDAC amd64: MC: 2:     0MB 3:     0MB
[   14.737777] EDAC amd64: MC: 4:     0MB 5:     0MB
[   14.742576] EDAC amd64: MC: 6:     0MB 7:     0MB
[   14.747369] EDAC amd64: using x4 syndromes.
[   14.751639] EDAC amd64: MCT channel count: 1
[   14.756079] EDAC amd64: CS0: Registered DDR2 RAM
[   14.761104] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[   14.771025] pata_amd 0000:00:06.0: version 0.4.1
[   14.771029] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   14.782902] scsi0 : pata_amd
[   14.786194] scsi1 : pata_amd
[   14.789248] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[   14.796343] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[   14.803513] sata_nv 0000:00:07.0: version 3.5
[   14.803898] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[   14.810618] scsi2 : sata_nv
[   14.813775] scsi3 : sata_nv
[   14.816809] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[   14.824071] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[   14.831578] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[   14.837902] scsi4 : sata_nv
[   14.841014] scsi5 : sata_nv
[   14.843984] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[   14.851217] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[   15.141863] ata3: SATA link down (SStatus 0 SControl 300)
[   15.169838] ata5: SATA link down (SStatus 0 SControl 300)
[   15.457771] ata4: SATA link down (SStatus 0 SControl 300)
[   15.773638] ata6: SATA link down (SStatus 0 SControl 300)