[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffa8fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dffa9000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-8753-gc56d5c5-dirty 04/02/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000160000000 aka 5632M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdffa9 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
[    0.000000]  [mem 0x15fe00000-0x15fffffff] page 2M
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
[    0.000000]  [mem 0x15c000000-0x15fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
[    0.000000]  [mem 0x140000000-0x15bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdffa8fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xdfdfffff] page 2M
[    0.000000]  [mem 0xdfe00000-0xdffa8fff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000DFFB20E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000DFFB48A0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000DFFB2250 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000DFFB2210 000040
[    0.000000] ACPI: SSDT 0x00000000DFFB49A0 000D57 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: APIC 0x00000000DFFB5700 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB57D0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB5948 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000DFFB5980 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB59C0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB5B38 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
[    0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[    0.000000]   NODE_DATA [mem 0x11fffb000-0x11fffffff]
[    0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
[    0.000000]   NODE_DATA [mem 0x15fff9000-0x15fffdfff]
[    0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
[    0.000000]  [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x15fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xdffa8fff]
[    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
[    0.000000]   node   1: [mem 0x120000000-0x15fffffff]
[    0.000000] On node 0 totalpages: 1048391
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12487 pages used for memmap
[    0.000000]   DMA32 zone: 913321 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdffa9000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
[    0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292595
[    0.000000] Policy zone: Normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xe5ea000000-0xe5ebffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
[    0.000000] Memory: 5015500K/5242140K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.820 MHz processor
[    0.000160] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.64 BogoMIPS (lpj=7639280)
[    0.010954] pid_max: default: 32768 minimum: 301
[    0.015677] ACPI: Core revision 20140424
[    0.022068] ACPI: All ACPI Tables successfully acquired
[    0.027583] Security Framework initialized
[    0.031763] AppArmor: AppArmor disabled by boot time parameter
[    0.037673] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.045495] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058812] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.068723] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.075757] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.083721] Initializing cgroup subsys memory
[    0.088184] Initializing cgroup subsys devices
[    0.092727] Initializing cgroup subsys freezer
[    0.097252] Initializing cgroup subsys net_cls
[    0.101787] Initializing cgroup subsys blkio
[    0.106142] Initializing cgroup subsys perf_event
[    0.110939] Initializing cgroup subsys net_prio
[    0.115597] tseg: 0000000000
[    0.115611] CPU: Physical Processor ID: 0
[    0.119731] CPU: Processor Core ID: 0
[    0.124535] mce: CPU supports 6 MCE banks
[    0.128671] LVT offset 0 assigned for vector 0xf9
[    0.133462] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.148941] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.158075] ftrace: allocating 21601 entries in 85 pages
[    0.173536] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.219188] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.336312] Performance Events: AMD PMU driver.
[    0.341023] ... version:                0
[    0.345129] ... bit width:              48
[    0.349313] ... generic registers:      4
[    0.353411] ... value mask:             0000ffffffffffff
[    0.358813] ... max period:             00007fffffffffff
[    0.364209] ... fixed-purpose events:   0
[    0.368313] ... event mask:             000000000000000f
[    0.376348] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.384656] x86: Booting SMP configuration:
[    0.388923] .... node  #0, CPUs:      #1 #2 #3
[    0.433486] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.585108] x86: Booted up 2 nodes, 8 CPUs
[    0.589544] smpboot: Total of 8 processors activated (30557.76 BogoMIPS)
[    0.602201] devtmpfs: initialized
[    0.614206] pinctrl core: initialized pinctrl subsystem
[    0.619673] NET: Registered protocol family 16
[    0.624409] cpuidle: using governor ladder
[    0.628592] cpuidle: using governor menu
[    0.632598] node 0 link 1: io port [1000, 3fff]
[    0.632601] TOM: 00000000e0000000 aka 3584M
[    0.636863] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.636867] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.636870] node 0 link 1: mmio [f8000000, fbffffff]
[    0.636872] TOM2: 0000000160000000 aka 5632M
[    0.641215] bus: [bus 00-05] on node 0 link 1
[    0.641217] bus: 00 [io  0x0000-0xffff]
[    0.641219] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.641221] bus: 00 [mem 0x160000000-0xfcffffffff]
[    0.641328] ACPI: bus type PCI registered
[    0.645415] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.652088] PCI: Using configuration type 1 for base access
[    0.657738] PCI: Using configuration type 1 for extended access
[    0.664357] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.670714] mtrr: probably your BIOS does not setup all CPUs.
[    0.676537] mtrr: corrected configuration.
[    0.693200] ACPI: Added _OSI(Module Device)
[    0.697505] ACPI: Added _OSI(Processor Device)
[    0.702029] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.706813] ACPI: Added _OSI(Processor Aggregator Device)
[    0.715703] ACPI: Interpreter enabled
[    0.719439] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.728907] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.738354] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.747808] ACPI: (supports S0 S1 S5)
[    0.751542] ACPI: Using IOAPIC for interrupt routing
[    0.756635] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.785555] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.791825] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.800141] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.838498] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.848652] PCI host bridge to bus 0000:00
[    0.852833] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.858391] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.864653] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.871604] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.878560] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.884834] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.884996] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.885004] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.885138] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.885149] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.885173] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.885182] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.885224] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.885332] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.885346] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.885375] pci 0000:00:02.0: supports D1 D2
[    0.885404] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.885469] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.891279] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.891292] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.891332] pci 0000:00:02.1: supports D1 D2
[    0.891334] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.891417] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.897234] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.897260] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.897288] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.904510] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.911125] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.918354] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.925075] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.925085] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.925090] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.925094] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.925099] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.925103] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.925108] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.925298] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.925307] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.925312] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.925317] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.925321] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.925326] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.925331] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.925502] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.925624] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.931431] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.931480] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.931530] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.937345] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.937400] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.937461] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.943273] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.943329] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.943382] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.949191] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.949240] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.949297] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.955123] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.955338] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.955447] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.955557] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.955698] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.955840] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.955974] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.956096] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.956195] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.956359] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.956569] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.956598] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.956608] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.956615] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.956663] pci 0000:01:04.0: supports D1 D2
[    0.956771] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.961832] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.961836] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.961839] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.961994] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.962029] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.962064] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
[    0.962133] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.962263] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.972395] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.977459] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.977569] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.977603] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.977705] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.977796] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.987927] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.992973] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.993058] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.998188] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.003280] pci_bus 0000:00: on NUMA node 0
[    1.003381] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    1.009804] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    1.016225] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.023905] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.031564] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.039237] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.046906] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.053324] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.059757] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.067391] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.075034] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.082691] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.089119] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.095557] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.103236] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.110887] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.118564] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.127678] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.134416] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.141135] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.147853] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.154879] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.160141] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.165925] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.174127] vgaarb: loaded
[    1.176927] vgaarb: bridge control possible 0000:01:04.0
[    1.182488] PCI: Using ACPI for IRQ routing
[    1.186770] PCI: pci_cache_line_size set to 64 bytes
[    1.186828] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.186831] e820: reserve RAM buffer [mem 0xdffa9000-0xdfffffff]
[    1.187144] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.194280] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.199565] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.208313] Switched to clocksource hpet
[    1.223821] pnp: PnP ACPI init
[    1.227040] ACPI: bus type PNP registered
[    1.231671] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.231751] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.231850] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.231928] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.231969] pnp 00:04: [dma 2]
[    1.232010] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.232032] pnp: PnP ACPI: found 5 devices
[    1.236251] ACPI: bus type PNP unregistered
[    1.248301] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
[    1.258363] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.263409] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.269593] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.276468] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.283803] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.291149] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.296199] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.303075] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.308121] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.314996] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.320053] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.325104] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.325107] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
[    1.325111] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
[    1.325113] pci_bus 0000:00: resource 7 [io  0x0000-0x0cf7]
[    1.325116] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.325119] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.325121] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.325124] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.325127] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.325267] NET: Registered protocol family 2
[    1.330214] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.337993] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.345416] TCP: Hash tables configured (established 65536 bind 65536)
[    1.352134] TCP: reno registered
[    1.355453] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.361726] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.368589] NET: Registered protocol family 1
[    1.373421] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.379628] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.385602] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.391215] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.396805] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.402456] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.408083] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.413667] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.419328] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.424929] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.430517] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.436178] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.441793] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.447383] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.453044] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.458639] pci 0000:01:04.0: Video device with shadowed ROM
[    1.458647] PCI: CLS 64 bytes, default 64
[    1.458756] Unpacking initramfs...
[    1.691761] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.699751] PCI-DMA: Disabling AGP.
[    1.704952] PCI-DMA: aperture base @ d4000000 size 65536 KB
[    1.710622] PCI-DMA: using GART IOMMU.
[    1.714447] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.726546] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.734893] microcode: CPU0: patch_level=0x01000096
[    1.739895] microcode: CPU1: patch_level=0x01000096
[    1.744911] microcode: CPU2: patch_level=0x01000096
[    1.749923] microcode: CPU3: patch_level=0x01000096
[    1.754932] microcode: CPU4: patch_level=0x01000096
[    1.759921] microcode: CPU5: patch_level=0x01000096
[    1.764916] microcode: CPU6: patch_level=0x01000096
[    1.771018] microcode: CPU7: patch_level=0x01000096
[    1.776122] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.785046] LVT offset 1 assigned for vector 0x400
[    1.789935] IBS: LVT offset 1 assigned
[    1.793808] perf: AMD IBS detected (0x00000007)
[    1.799035] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.805502] audit: initializing netlink subsys (disabled)
[    1.811016] audit: type=2000 audit(1427958797.624:1): initialized
[    1.817929] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.824432] zbud: loaded
[    1.827404] VFS: Disk quotas dquot_6.5.2
[    1.831455] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.838096] msgmni has been set to 9941
[    1.842569] alg: No test for stdrng (krng)
[    1.846863] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.854511] io scheduler noop registered
[    1.858550] io scheduler deadline registered
[    1.862980] io scheduler cfq registered (default)
[    1.867982] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.868117] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.868259] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.868373] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.868521] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.868549] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.868574] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.868600] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.868620] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.875707] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.882325] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.882335] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.889386] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.896005] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.896015] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.903059] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.903071] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.910111] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.910140] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.915834] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.922663] GHES: HEST is not enabled!
[    1.926631] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.953426] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.981212] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.989250] Linux agpgart interface v0.103
[    1.993667] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.004139] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.009254] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.014595] mousedev: PS/2 mouse device common for all mice
[    2.020397] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.025621] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.032098] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.040063] ledtrig-cpu: registered to indicate activity on CPUs
[    2.046340] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.052873] AMD IOMMUv2 functionality not available on this system
[    2.059297] TCP: cubic registered
[    2.062843] NET: Registered protocol family 10
[    2.067796] mip6: Mobile IPv6
[    2.070881] NET: Registered protocol family 17
[    2.075480] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.084263] mpls_gso: MPLS GSO support
[    2.088983] registered taskstats version 1
[    2.093923] rtc_cmos rtc_cmos: setting system clock to 2015-04-02 07:13:19 UTC (1427958799)
[    2.102505] PM: Hibernation image not present or could not be loaded.
[    2.104343] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.112364] Write protecting the kernel read-only data: 8192k
[    2.121693] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.130433] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.150558] systemd-udevd[99]: starting version 215
[    2.156109] random: systemd-udevd urandom read with 3 bits of entropy available
[    2.178725] pps_core: LinuxPPS API ver. 1 registered
[    2.183802] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.193507] ACPI: bus type USB registered
[    2.197817] usbcore: registered new interface driver usbfs
[    2.197850] PTP clock support registered
[    2.207525] usbcore: registered new interface driver hub
[    2.213198] usbcore: registered new device driver usb
[    2.213276] tg3.c:v3.137 (May 11, 2014)
[    2.213290] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.213491] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.234827] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.242069] ehci-pci: EHCI PCI platform driver
[    2.246965] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.246979] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.258625] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.266184] ehci-pci 0000:00:02.1: debug port 1
[    2.270843] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.270873] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.287977] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.293972] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.300835] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.307594] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.307597] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.307599] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.307600] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.307705] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.307859] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.354610] usb usb1: Product: EHCI Host Controller
[    2.359571] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.365750] usb usb1: SerialNumber: 0000:00:02.1
[    2.370726] hub 1-0:1.0: USB hub found
[    2.374611] hub 1-0:1.0: 10 ports detected
[    2.379814] ohci-pci: OHCI PCI platform driver
[    2.384620] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.390377] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.392750] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.392753] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.392755] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.392757] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.432887] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.493939] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.500855] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.508207] usb usb2: Product: OHCI PCI host controller
[    2.513517] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.519693] usb usb2: SerialNumber: 0000:00:02.0
[    2.524603] hub 2-0:1.0: USB hub found
[    2.528480] hub 2-0:1.0: 10 ports detected
[    2.538420] FS-Cache: Loaded
[    2.545610] RPC: Registered named UNIX socket transport module.
[    2.552250] RPC: Registered udp transport module.
[    2.558336] RPC: Registered tcp transport module.
[    2.564437] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.576872] FS-Cache: Netfs 'nfs' registered for caching
[    2.590561] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.635940] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.723806] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[    3.727550] Switched to clocksource tsc
[    4.251825] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.258493] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.265485] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    7.538269] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    7.552429] systemd[1]: Detected architecture 'x86-64'.
[    7.743444] random: nonblocking pool is initialized
[    7.766208] systemd[1]: Inserted module 'autofs4'
[    7.772921] systemd[1]: Set hostname to <cb-test-tgt>.
[    8.099553] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    8.112462] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    8.127840] systemd[1]: Expecting device dev-ttyS0.device...
[    8.141978] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    8.149866] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.157583] systemd[1]: Starting Remote File Systems (Pre).
[    8.174034] systemd[1]: Reached target Remote File Systems (Pre).
[    8.180400] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    8.202032] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.211692] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    8.219954] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    8.227998] systemd[1]: Starting Paths.
[    8.242010] systemd[1]: Reached target Paths.
[    8.246560] systemd[1]: Starting Encrypted Volumes.
[    8.261925] systemd[1]: Reached target Encrypted Volumes.
[    8.267480] systemd[1]: Starting Swap.
[    8.281912] systemd[1]: Reached target Swap.
[    8.286299] systemd[1]: Starting Root Slice.
[    8.309946] systemd[1]: Created slice Root Slice.
[    8.314811] systemd[1]: Starting User and Session Slice.
[    8.329939] systemd[1]: Created slice User and Session Slice.
[    8.335869] systemd[1]: Starting Delayed Shutdown Socket.
[    8.349932] systemd[1]: Listening on Delayed Shutdown Socket.
[    8.355870] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    8.373896] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.381030] systemd[1]: Starting Journal Socket (/dev/log).
[    8.397883] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.403955] systemd[1]: Starting Syslog Socket.
[    8.417864] systemd[1]: Listening on Syslog Socket.
[    8.423976] systemd[1]: Starting udev Kernel Socket.
[    8.437855] systemd[1]: Listening on udev Kernel Socket.
[    8.443296] systemd[1]: Starting udev Control Socket.
[    8.457848] systemd[1]: Listening on udev Control Socket.
[    8.463390] systemd[1]: Starting Journal Socket.
[    8.477842] systemd[1]: Listening on Journal Socket.
[    8.482936] systemd[1]: Starting Sockets.
[    8.497832] systemd[1]: Reached target Sockets.
[    8.502491] systemd[1]: Starting System Slice.
[    8.517839] systemd[1]: Created slice System Slice.
[    8.522917] systemd[1]: Starting system-getty.slice.
[    8.537844] systemd[1]: Created slice system-getty.slice.
[    8.543379] systemd[1]: Starting system-serial\x2dgetty.slice.
[    8.561830] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    8.568874] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.591189] systemd[1]: Mounting Debug File System...
[    8.620361] systemd[1]: Started Set Up Additional Binary Formats.
[    8.626634] systemd[1]: Mounting Huge Pages File System...
[    8.671686] systemd[1]: Starting Load Kernel Modules...
[    8.686826] systemd[1]: Mounting POSIX Message Queue File System...
[    8.702917] systemd[1]: Starting udev Coldplug all Devices...
[    8.718652] systemd[1]: Starting Journal Service...
[    8.741816] systemd[1]: Started Journal Service.
[    9.359983] systemd-udevd[185]: starting version 215
[    9.644947] systemd-journald[167]: Received request to flush runtime journal from PID 1
[   10.120876] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[   10.129143] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[   10.146532] EDAC MC: Ver: 3.0.0
[   10.182868] SCSI subsystem initialized
[   10.247306] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[   10.255849] ACPI: Power Button [PWRB]
[   10.259680] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   10.267202] ACPI: Power Button [PWRF]
[   10.269257] FDC 0 is a post-1991 82077
[   10.280312] MCE: In-kernel MCE decoding enabled.
[   10.309298] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
[   10.316365] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[   10.322279] libata version 3.00 loaded.
[   10.322786] acpi-cpufreq: overriding BIOS provided _PSD data
[   10.328962] AMD64 EDAC driver v3.4.0
[   10.333095] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   10.632023] kvm: Nested Virtualization enabled
[   10.636718] kvm: Nested Paging enabled
[   13.556062] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[   13.561603] EDAC amd64: DRAM ECC enabled.
[   13.561609] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.572538] EDAC amd64: F10h detected (node 0).
[   13.577237] EDAC MC: DCT0 chip selects:
[   13.577240] EDAC amd64: MC: 0:     0MB 1:     0MB
[   13.582058] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.586842] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.591613] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   13.596389] EDAC MC: DCT1 chip selects:
[   13.596392] EDAC amd64: MC: 0:     0MB 1:     0MB
[   13.601197] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.605984] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.610777] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   13.615581] EDAC amd64: using x4 syndromes.
[   13.619864] EDAC amd64: MCT channel count: 2
[   13.624294] EDAC amd64: CS6: Registered DDR2 RAM
[   13.629012] EDAC amd64: CS7: Registered DDR2 RAM
[   13.634145] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[   13.644079] EDAC amd64: DRAM ECC enabled.
[   13.648275] EDAC amd64: F10h detected (node 1).
[   13.652941] EDAC MC: DCT0 chip selects:
[   13.652945] EDAC amd64: MC: 0:  1024MB 1:     0MB
[   13.657746] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.662548] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.667345] EDAC amd64: MC: 6:     0MB 7:     0MB
[   13.672148] EDAC MC: DCT1 chip selects:
[   13.672155] EDAC amd64: MC: 0:     0MB 1:     0MB
[   13.676942] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.681735] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.686536] EDAC amd64: MC: 6:     0MB 7:     0MB
[   13.691332] EDAC amd64: using x4 syndromes.
[   13.695612] EDAC amd64: MCT channel count: 1
[   13.700074] EDAC amd64: CS0: Registered DDR2 RAM
[   13.705082] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[   13.714954] sata_nv 0000:00:07.0: version 3.5
[   13.714981] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   13.715404] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[   13.716175] scsi0 : sata_nv
[   13.735042] scsi1 : sata_nv
[   13.738010] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[   13.745232] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[   13.752775] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[   13.760160] scsi2 : sata_nv
[   13.764016] scsi3 : sata_nv
[   13.768071] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[   13.776534] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[   13.784073] pata_amd 0000:00:06.0: version 0.4.1
[   13.784810] scsi4 : pata_amd
[   13.788401] scsi5 : pata_amd
[   13.791461] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[   13.798506] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[   14.063901] ata1: SATA link down (SStatus 0 SControl 300)
[   14.095885] ata3: SATA link down (SStatus 0 SControl 300)
[   14.379780] ata2: SATA link down (SStatus 0 SControl 300)
[   14.695672] ata4: SATA link down (SStatus 0 SControl 300)