[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dffab000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-8513-g74c0642-dirty 03/25/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000160000000 aka 5632M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdffab max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
[    0.000000]  [mem 0x15fe00000-0x15fffffff] page 2M
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
[    0.000000]  [mem 0x15c000000-0x15fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
[    0.000000]  [mem 0x140000000-0x15bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdffaafff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xdfdfffff] page 2M
[    0.000000]  [mem 0xdfe00000-0xdffaafff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000DFFB40E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000DFFB68A0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000DFFB4250 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000DFFB4210 000040
[    0.000000] ACPI: SSDT 0x00000000DFFB69A0 000D57 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: APIC 0x00000000DFFB7700 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB77D0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB7948 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000DFFB7980 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB79C0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB7B38 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
[    0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[    0.000000]   NODE_DATA [mem 0x11fffb000-0x11fffffff]
[    0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
[    0.000000]   NODE_DATA [mem 0x15fff9000-0x15fffdfff]
[    0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
[    0.000000]  [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x15fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xdffaafff]
[    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
[    0.000000]   node   1: [mem 0x120000000-0x15fffffff]
[    0.000000] On node 0 totalpages: 1048393
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12487 pages used for memmap
[    0.000000]   DMA32 zone: 913323 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdffab000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
[    0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292597
[    0.000000] Policy zone: Normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
[    0.000000] Memory: 5015508K/5242148K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.859 MHz processor
[    0.000159] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.71 BogoMIPS (lpj=7639436)
[    0.010954] pid_max: default: 32768 minimum: 301
[    0.015676] ACPI: Core revision 20140424
[    0.022068] ACPI: All ACPI Tables successfully acquired
[    0.027591] Security Framework initialized
[    0.031771] AppArmor: AppArmor disabled by boot time parameter
[    0.037680] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.045492] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058779] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.068658] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.075676] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.083630] Initializing cgroup subsys memory
[    0.088096] Initializing cgroup subsys devices
[    0.092639] Initializing cgroup subsys freezer
[    0.097164] Initializing cgroup subsys net_cls
[    0.101699] Initializing cgroup subsys blkio
[    0.106054] Initializing cgroup subsys perf_event
[    0.110859] Initializing cgroup subsys net_prio
[    0.115516] tseg: 0000000000
[    0.115530] CPU: Physical Processor ID: 0
[    0.119664] CPU: Processor Core ID: 0
[    0.124477] mce: CPU supports 6 MCE banks
[    0.128618] LVT offset 0 assigned for vector 0xf9
[    0.133409] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.148888] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.158027] ftrace: allocating 21601 entries in 85 pages
[    0.173500] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.219148] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.336304] Performance Events: AMD PMU driver.
[    0.341025] ... version:                0
[    0.345136] ... bit width:              48
[    0.349311] ... generic registers:      4
[    0.353410] ... value mask:             0000ffffffffffff
[    0.358821] ... max period:             00007fffffffffff
[    0.364217] ... fixed-purpose events:   0
[    0.368319] ... event mask:             000000000000000f
[    0.376347] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.384677] x86: Booting SMP configuration:
[    0.388956] .... node  #0, CPUs:      #1 #2 #3
[    0.433555] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.585106] x86: Booted up 2 nodes, 8 CPUs
[    0.589535] smpboot: Total of 8 processors activated (30558.09 BogoMIPS)
[    0.602159] devtmpfs: initialized
[    0.614169] pinctrl core: initialized pinctrl subsystem
[    0.619641] NET: Registered protocol family 16
[    0.624379] cpuidle: using governor ladder
[    0.628556] cpuidle: using governor menu
[    0.632563] node 0 link 1: io port [1000, 3fff]
[    0.632566] TOM: 00000000e0000000 aka 3584M
[    0.636828] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.636833] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.636836] node 0 link 1: mmio [f8000000, fbffffff]
[    0.636838] TOM2: 0000000160000000 aka 5632M
[    0.641177] bus: [bus 00-05] on node 0 link 1
[    0.641179] bus: 00 [io  0x0000-0xffff]
[    0.641180] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.641182] bus: 00 [mem 0x160000000-0xfcffffffff]
[    0.641289] ACPI: bus type PCI registered
[    0.645378] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.652052] PCI: Using configuration type 1 for base access
[    0.657701] PCI: Using configuration type 1 for extended access
[    0.664319] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.670677] mtrr: probably your BIOS does not setup all CPUs.
[    0.676502] mtrr: corrected configuration.
[    0.693188] ACPI: Added _OSI(Module Device)
[    0.697489] ACPI: Added _OSI(Processor Device)
[    0.702003] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.706788] ACPI: Added _OSI(Processor Aggregator Device)
[    0.715658] ACPI: Interpreter enabled
[    0.719406] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.728897] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.738345] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.747782] ACPI: (supports S0 S1 S5)
[    0.751533] ACPI: Using IOAPIC for interrupt routing
[    0.756617] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.784918] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.791185] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.799486] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.835973] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.846079] PCI host bridge to bus 0000:00
[    0.850250] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.855807] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.862063] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.869002] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.875953] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.882220] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.882412] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.882419] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.882659] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.882670] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.882695] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.882703] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.882745] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.882850] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.882865] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.882892] pci 0000:00:02.0: supports D1 D2
[    0.882904] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.882952] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.888769] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.888782] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.888823] pci 0000:00:02.1: supports D1 D2
[    0.888842] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.888911] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.894730] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.894756] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.894784] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.902018] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.908634] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.915853] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.922566] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.922582] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.922594] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.922599] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.922604] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.922608] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.922613] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.922761] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.922771] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.922775] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.922780] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.922784] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.922789] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.922794] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.922967] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.923094] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.928889] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.928936] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.928984] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.934777] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.934832] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.934888] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.940707] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.940757] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.940804] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.946598] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.946647] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.946704] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.952531] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.952706] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.952815] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.952929] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.953055] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.953170] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.953295] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.953433] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.953568] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.953733] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.953917] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.953936] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.953946] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.953952] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.954000] pci 0000:01:04.0: supports D1 D2
[    0.954113] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.959181] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.959184] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.959187] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.959310] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.959350] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.959376] pci 0000:02:00.0: reg 0x30: [mem 0x29c00000-0x29c0ffff pref]
[    0.959435] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.959514] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.969638] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.974692] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.974803] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.974829] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.974939] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.975034] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.985153] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.990199] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.990284] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.995395] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.000472] pci_bus 0000:00: on NUMA node 0
[    1.000572] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    1.007002] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    1.013414] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.021065] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.028717] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.036375] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.044038] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.050463] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.056881] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.064518] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.072173] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.079834] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.086246] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.092676] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.100325] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.107978] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.115637] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.124736] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.131437] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.138149] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.144855] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.151856] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.157115] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.162901] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.171091] vgaarb: loaded
[    1.173894] vgaarb: bridge control possible 0000:01:04.0
[    1.179456] PCI: Using ACPI for IRQ routing
[    1.183745] PCI: pci_cache_line_size set to 64 bytes
[    1.183802] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.183805] e820: reserve RAM buffer [mem 0xdffab000-0xdfffffff]
[    1.184120] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.191255] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.196522] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.205273] Switched to clocksource hpet
[    1.220845] pnp: PnP ACPI init
[    1.224063] ACPI: bus type PNP registered
[    1.228705] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.228784] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.228882] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.228961] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.229002] pnp 00:04: [dma 2]
[    1.229043] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.229065] pnp: PnP ACPI: found 5 devices
[    1.233257] ACPI: bus type PNP unregistered
[    1.245330] pci 0000:02:00.0: can't claim BAR 6 [mem 0x29c00000-0x29c0ffff pref]: no compatible bridge window
[    1.255380] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.260428] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.266611] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.273488] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.280823] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.288184] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.293239] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.300111] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.305156] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.312032] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.317087] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.322140] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.322143] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
[    1.322146] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
[    1.322149] pci_bus 0000:00: resource 7 [io  0x0000-0x0cf7]
[    1.322151] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.322154] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.322157] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.322159] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.322163] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.322299] NET: Registered protocol family 2
[    1.327268] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.335058] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.342473] TCP: Hash tables configured (established 65536 bind 65536)
[    1.349152] TCP: reno registered
[    1.352481] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.358757] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.365608] NET: Registered protocol family 1
[    1.370431] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.376630] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.382617] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.388241] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.393826] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.399475] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.405101] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.410677] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.416337] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.421950] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.427533] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.433185] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.438785] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.444376] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.450037] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.455633] pci 0000:01:04.0: Video device with shadowed ROM
[    1.455642] PCI: CLS 64 bytes, default 64
[    1.455750] Unpacking initramfs...
[    1.688960] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.696960] PCI-DMA: Disabling AGP.
[    1.702167] PCI-DMA: aperture base @ d4000000 size 65536 KB
[    1.707831] PCI-DMA: using GART IOMMU.
[    1.711656] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.723765] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.732116] microcode: CPU0: patch_level=0x01000096
[    1.737115] microcode: CPU1: patch_level=0x01000096
[    1.742121] microcode: CPU2: patch_level=0x01000096
[    1.747133] microcode: CPU3: patch_level=0x01000096
[    1.752141] microcode: CPU4: patch_level=0x01000096
[    1.757135] microcode: CPU5: patch_level=0x01000096
[    1.762128] microcode: CPU6: patch_level=0x01000096
[    1.768227] microcode: CPU7: patch_level=0x01000096
[    1.773319] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.782257] LVT offset 1 assigned for vector 0x400
[    1.787159] IBS: LVT offset 1 assigned
[    1.791067] perf: AMD IBS detected (0x00000007)
[    1.796295] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.802767] audit: initializing netlink subsys (disabled)
[    1.808276] audit: type=2000 audit(1427325069.620:1): initialized
[    1.815179] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.821684] zbud: loaded
[    1.824648] VFS: Disk quotas dquot_6.5.2
[    1.828709] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.835348] msgmni has been set to 9941
[    1.839812] alg: No test for stdrng (krng)
[    1.844103] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.851735] io scheduler noop registered
[    1.855758] io scheduler deadline registered
[    1.860196] io scheduler cfq registered (default)
[    1.865208] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.865335] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.865474] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.865596] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.865745] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.865773] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.865798] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.865823] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.865843] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.872943] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.879573] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.879584] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.886631] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.893239] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.893250] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.900293] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.900305] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.907346] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.907375] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.913056] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.919892] GHES: HEST is not enabled!
[    1.923853] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.950649] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.978431] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.986482] Linux agpgart interface v0.103
[    1.990898] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.001467] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.006567] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.011902] mousedev: PS/2 mouse device common for all mice
[    2.017710] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.022920] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.029412] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.037387] ledtrig-cpu: registered to indicate activity on CPUs
[    2.043592] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.050108] AMD IOMMUv2 functionality not available on this system
[    2.056506] TCP: cubic registered
[    2.060076] NET: Registered protocol family 10
[    2.063000] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.073745] mip6: Mobile IPv6
[    2.076791] NET: Registered protocol family 17
[    2.081316] mpls_gso: MPLS GSO support
[    2.085949] registered taskstats version 1
[    2.090864] rtc_cmos rtc_cmos: setting system clock to 2015-03-25 23:11:11 UTC (1427325071)
[    2.099457] PM: Hibernation image not present or could not be loaded.
[    2.101279] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.109310] Write protecting the kernel read-only data: 8192k
[    2.118651] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.127386] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.147365] systemd-udevd[98]: starting version 215
[    2.152912] random: systemd-udevd urandom read with 3 bits of entropy available
[    2.175571] pps_core: LinuxPPS API ver. 1 registered
[    2.180630] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.190339] ACPI: bus type USB registered
[    2.194650] usbcore: registered new interface driver usbfs
[    2.194705] PTP clock support registered
[    2.204357] usbcore: registered new interface driver hub
[    2.210054] usbcore: registered new device driver usb
[    2.210093] tg3.c:v3.137 (May 11, 2014)
[    2.210105] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.210314] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.231655] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.238856] ehci-pci: EHCI PCI platform driver
[    2.243675] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.243726] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.243744] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.243764] ehci-pci 0000:00:02.1: debug port 1
[    2.243812] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.243840] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.252941] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.253002] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.253004] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.253006] usb usb1: Product: EHCI Host Controller
[    2.253007] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.253008] usb usb1: SerialNumber: 0000:00:02.1
[    2.253317] hub 1-0:1.0: USB hub found
[    2.253328] hub 1-0:1.0: 10 ports detected
[    2.317529] ohci-pci: OHCI PCI platform driver
[    2.322296] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.328021] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.335615] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.336257] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.336260] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.336262] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.336264] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.336398] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.336595] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.429396] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.439833] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.442933] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.442935] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.442936] usb usb2: Product: OHCI PCI host controller
[    2.442938] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.442939] usb usb2: SerialNumber: 0000:00:02.0
[    2.443149] hub 2-0:1.0: USB hub found
[    2.443160] hub 2-0:1.0: 10 ports detected
[    2.488010] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.495972] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.509494] FS-Cache: Loaded
[    2.516711] RPC: Registered named UNIX socket transport module.
[    2.523392] RPC: Registered udp transport module.
[    2.529453] RPC: Registered tcp transport module.
[    2.535553] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.547827] FS-Cache: Netfs 'nfs' registered for caching
[    2.561566] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.608918] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.720766] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[    3.724517] Switched to clocksource tsc
[    4.199756] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.206444] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.213433] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    7.062560] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    7.076720] systemd[1]: Detected architecture 'x86-64'.
[    7.256006] random: nonblocking pool is initialized
[    7.454022] systemd[1]: Inserted module 'autofs4'
[    7.460862] systemd[1]: Set hostname to <cb-test-tgt>.
[    7.978964] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    7.991860] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    8.007245] systemd[1]: Expecting device dev-ttyS0.device...
[    8.023081] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    8.031088] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.038793] systemd[1]: Starting Remote File Systems (Pre).
[    8.055038] systemd[1]: Reached target Remote File Systems (Pre).
[    8.061411] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    8.082963] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.092553] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    8.100735] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    8.108771] systemd[1]: Starting Paths.
[    8.122940] systemd[1]: Reached target Paths.
[    8.127452] systemd[1]: Starting Encrypted Volumes.
[    8.142940] systemd[1]: Reached target Encrypted Volumes.
[    8.148493] systemd[1]: Starting Swap.
[    8.162922] systemd[1]: Reached target Swap.
[    8.167352] systemd[1]: Starting Root Slice.
[    8.222935] systemd[1]: Created slice Root Slice.
[    8.227795] systemd[1]: Starting User and Session Slice.
[    8.242890] systemd[1]: Created slice User and Session Slice.
[    8.248756] systemd[1]: Starting Delayed Shutdown Socket.
[    8.262924] systemd[1]: Listening on Delayed Shutdown Socket.
[    8.268851] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    8.286896] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.294040] systemd[1]: Starting Journal Socket (/dev/log).
[    8.310875] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.316934] systemd[1]: Starting Syslog Socket.
[    8.330872] systemd[1]: Listening on Syslog Socket.
[    8.337000] systemd[1]: Starting udev Kernel Socket.
[    8.350862] systemd[1]: Listening on udev Kernel Socket.
[    8.356334] systemd[1]: Starting udev Control Socket.
[    8.370843] systemd[1]: Listening on udev Control Socket.
[    8.376391] systemd[1]: Starting Journal Socket.
[    8.390833] systemd[1]: Listening on Journal Socket.
[    8.395957] systemd[1]: Starting Sockets.
[    8.410825] systemd[1]: Reached target Sockets.
[    8.415493] systemd[1]: Starting System Slice.
[    8.430830] systemd[1]: Created slice System Slice.
[    8.435825] systemd[1]: Starting system-getty.slice.
[    8.450832] systemd[1]: Created slice system-getty.slice.
[    8.456369] systemd[1]: Starting system-serial\x2dgetty.slice.
[    8.474811] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    8.481900] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.504399] systemd[1]: Mounting Debug File System...
[    8.528249] systemd[1]: Started Set Up Additional Binary Formats.
[    8.534532] systemd[1]: Mounting Huge Pages File System...
[    8.578423] systemd[1]: Starting Load Kernel Modules...
[    8.592329] systemd[1]: Mounting POSIX Message Queue File System...
[    8.612189] systemd[1]: Starting udev Coldplug all Devices...
[    8.627805] systemd[1]: Starting Journal Service...
[    8.654822] systemd[1]: Started Journal Service.
[    9.241058] systemd-udevd[185]: starting version 215
[    9.525972] systemd-journald[166]: Received request to flush runtime journal from PID 1
[    9.968489] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    9.976763] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[   10.016537] SCSI subsystem initialized
[   10.078301] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[   10.086805] ACPI: Power Button [PWRB]
[   10.090812] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   10.091145] EDAC MC: Ver: 3.0.0
[   10.101571] ACPI: Power Button [PWRF]
[   10.122905] libata version 3.00 loaded.
[   10.136066] MCE: In-kernel MCE decoding enabled.
[   10.147572] acpi-cpufreq: overriding BIOS provided _PSD data
[   10.150257] FDC 0 is a post-1991 82077
[   10.158265] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   10.165141] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
[   10.172281] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[   10.172918] AMD64 EDAC driver v3.4.0
[   10.270449] kvm: Nested Virtualization enabled
[   10.275092] kvm: Nested Paging enabled
[   13.417078] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[   13.422577] pata_amd 0000:00:06.0: version 0.4.1
[   13.422630] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.423695] scsi0 : pata_amd
[   13.433321] scsi1 : pata_amd
[   13.436553] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[   13.443648] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[   13.450817] sata_nv 0000:00:07.0: version 3.5
[   13.451253] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[   13.457979] scsi2 : sata_nv
[   13.460994] scsi3 : sata_nv
[   13.463943] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[   13.471158] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[   13.478643] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[   13.484972] scsi4 : sata_nv
[   13.488103] scsi5 : sata_nv
[   13.491078] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[   13.498338] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[   13.505878] EDAC amd64: DRAM ECC enabled.
[   13.510052] EDAC amd64: F10h detected (node 0).
[   13.514705] EDAC MC: DCT0 chip selects:
[   13.514708] EDAC amd64: MC: 0:     0MB 1:     0MB
[   13.519502] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.524301] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.529086] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   13.533885] EDAC MC: DCT1 chip selects:
[   13.533886] EDAC amd64: MC: 0:     0MB 1:     0MB
[   13.538685] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.543479] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.548275] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   13.553062] EDAC amd64: using x4 syndromes.
[   13.557333] EDAC amd64: MCT channel count: 2
[   13.561742] EDAC amd64: CS6: Registered DDR2 RAM
[   13.566449] EDAC amd64: CS7: Registered DDR2 RAM
[   13.571436] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[   13.581319] EDAC amd64: DRAM ECC enabled.
[   13.585518] EDAC amd64: F10h detected (node 1).
[   13.590194] EDAC MC: DCT0 chip selects:
[   13.590198] EDAC amd64: MC: 0:  1024MB 1:     0MB
[   13.595007] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.599806] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.604605] EDAC amd64: MC: 6:     0MB 7:     0MB
[   13.609404] EDAC MC: DCT1 chip selects:
[   13.609407] EDAC amd64: MC: 0:     0MB 1:     0MB
[   13.614200] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.618999] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.623795] EDAC amd64: MC: 6:     0MB 7:     0MB
[   13.628595] EDAC amd64: using x4 syndromes.
[   13.632871] EDAC amd64: MCT channel count: 1
[   13.637314] EDAC amd64: CS0: Registered DDR2 RAM
[   13.642306] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[   13.652278] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   13.788952] ata3: SATA link down (SStatus 0 SControl 300)
[   13.816942] ata5: SATA link down (SStatus 0 SControl 300)
[   14.104841] ata4: SATA link down (SStatus 0 SControl 300)
[   14.420731] ata6: SATA link down (SStatus 0 SControl 300)