[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
[    0.000000] Command line: root=/dev/nfs initrd=initrd-coreboot-dev rootfstype=nfs nfsroot=192.168.1.50:/mnt/udata/nfsroots/coreboot-dev,v3,hard,nointr,tcp ip=192.168.22.60::192.168.22.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-coreboot-dev 
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffaffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ffb0000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-7984-g808cc15 01/26/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x3ffb0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFFC0000000 write-back
[    0.000000]   1 base 0000D4000000 mask FFFFFC000000 write-combining
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f1500-0x000f150f] mapped at [ffff8800000f1500]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE
[    0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE
[    0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x3ee00000-0x3effffff]
[    0.000000]  [mem 0x3ee00000-0x3effffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x3c000000-0x3edfffff]
[    0.000000]  [mem 0x3c000000-0x3edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x3bffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x3f000000-0x3ffaffff]
[    0.000000]  [mem 0x3f000000-0x3fdfffff] page 2M
[    0.000000]  [mem 0x3fe00000-0x3ffaffff] page 4k
[    0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3f1d8000-0x3fe88fff]
[    0.000000] ACPI: RSDP 00000000000f16d0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 000000003ffb90e0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 000000003ffbb8a0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 000000003ffb9250 002644 (v02 ASUS   COREBOOT 00000001 INTL 20140114)
[    0.000000] ACPI: FACS 000000003ffb9210 000040
[    0.000000] ACPI: SSDT 000000003ffbb9a0 000D57 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: APIC 000000003ffbc700 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 000000003ffbc7d0 000128 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 000000003ffbc8f8 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 000000003ffbc930 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 000000003ffbc970 000128 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 000000003ffbca98 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0x3fffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0x3fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0x3ffaffff] overlaps with node 0 [mem 0x00100000-0x3ffaffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 000000003ffb0000
[    0.000000] Skipping disabled node 1
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x3ffaffff]
[    0.000000]   NODE_DATA [mem 0x3ffab000-0x3ffaffff]
[    0.000000]  [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003d800000-ffff88003e7fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3ffaffff]
[    0.000000] On node 0 totalpages: 261966
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 4031 pages used for memmap
[    0.000000]   DMA32 zone: 257968 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x10] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 16, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88003ee00000 s86336 r8192 d24256 u262144
[    0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 257850
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/nfs initrd=initrd-coreboot-dev rootfstype=nfs nfsroot=192.168.1.50:/mnt/udata/nfsroots/coreboot-dev,v3,hard,nointr,tcp ip=192.168.22.60::192.168.22.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-coreboot-dev 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ d8000000 size 64 MB
[    0.000000] Node 1: aperture @ d8000000 size 64 MB
[    0.000000] Memory: 1000940K/1047864K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 46924K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-7.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2311.706 MHz processor
[    0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4623.41 BogoMIPS (lpj=9246824)
[    0.010659] pid_max: default: 32768 minimum: 301
[    0.015328] Security Framework initialized
[    0.019476] AppArmor: AppArmor initialized
[    0.023590] Yama: becoming mindful.
[    0.027260] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.035127] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.042367] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.049082] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.056536] Initializing cgroup subsys memory
[    0.060914] Initializing cgroup subsys devices
[    0.065383] Initializing cgroup subsys freezer
[    0.069839] Initializing cgroup subsys blkio
[    0.074120] Initializing cgroup subsys perf_event
[    0.078837] Initializing cgroup subsys hugetlb
[    0.083315] tseg: 0000000000
[    0.083327] CPU: Physical Processor ID: 0
[    0.087352] CPU: Processor Core ID: 0
[    0.091031] mce: CPU supports 6 MCE banks
[    0.095073] LVT offset 0 assigned for vector 0xf9
[    0.099791] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.099791] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[    0.099791] tlb_flushall_shift: 4
[    0.114553] Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
[    0.123475] ACPI: Core revision 20131115
[    0.128658] ACPI: All ACPI Tables successfully acquired
[    0.133960] ftrace: allocating 28408 entries in 111 pages
[    0.153998] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.199547] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8356 (fam: 10, model: 02, stepping: 02)
[    0.316788] Performance Events: AMD PMU driver.
[    0.321371] ... version:                0
[    0.325390] ... bit width:              48
[    0.329498] ... generic registers:      4
[    0.333512] ... value mask:             0000ffffffffffff
[    0.338825] ... max period:             00007fffffffffff
[    0.344139] ... fixed-purpose events:   0
[    0.348160] ... event mask:             000000000000000f
[    0.356056] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.364213] x86: Booting SMP configuration:
[    0.368401] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.561679] x86: Booted up 1 node, 8 CPUs
[    0.565901] smpboot: Total of 8 processors activated (36988.90 BogoMIPS)
[    0.577738] devtmpfs: initialized
[    0.584713] EVM: security.selinux
[    0.588037] EVM: security.SMACK64
[    0.591365] EVM: security.ima
[    0.594339] EVM: security.capability
[    0.599284] pinctrl core: initialized pinctrl subsystem
[    0.604608] regulator-dummy: no parameters
[    0.608766] RTC time: 21:23:56, date: 01/28/15
[    0.613269] NET: Registered protocol family 16
[    0.617868] cpuidle: using governor ladder
[    0.621973] cpuidle: using governor menu
[    0.625913] node 0 link 1: io port [1000, 3fff]
[    0.625916] TOM: 0000000040000000 aka 1024M
[    0.630104] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.630107] node 0 link 1: mmio [dc000000, dc3fffff]
[    0.630110] node 0 link 1: mmio [d4000000, d7ffffff]
[    0.630113] bus: [bus 00-05] on node 0 link 1
[    0.630114] bus: 00 [io  0x0000-0xffff]
[    0.630116] bus: 00 [mem 0xd8000000-0xdfffffff]
[    0.630118] bus: 00 [mem 0x40000000-0xd7ffffff]
[    0.630119] bus: 00 [mem 0xf0000000-0xfcffffffff]
[    0.630206] ACPI: bus type PCI registered
[    0.634222] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.640737] PCI: Using configuration type 1 for base access
[    0.646311] PCI: Using configuration type 1 for extended access
[    0.652581] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.658853] mtrr: probably your BIOS does not setup all CPUs.
[    0.664600] mtrr: corrected configuration.
[    0.669650] bio: create slab <bio-0> at 0
[    0.673942] ACPI: Added _OSI(Module Device)
[    0.678132] ACPI: Added _OSI(Processor Device)
[    0.682588] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.687301] ACPI: Added _OSI(Processor Aggregator Device)
[    0.695452] ACPI: Interpreter enabled
[    0.699136] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.708429] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
[    0.717702] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580)
[    0.726978] ACPI: (supports S0 S1 S5)
[    0.730652] ACPI: Using IOAPIC for interrupt routing
[    0.735656] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.744875] ACPI: No dock devices found.
[    0.767488] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.773684] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.781893] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.818659] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.828651] PCI host bridge to bus 0000:00
[    0.832762] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.838255] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.844445] pci_bus 0000:00: root bus resource [mem 0xd4000000-0xd7ffffff]
[    0.851326] pci_bus 0000:00: root bus resource [mem 0xdc000000-0xdc3fffff]
[    0.858209] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.864409] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.864575] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.864582] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.864683] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.864690] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.864712] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.864726] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.864758] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.864835] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.864845] pci 0000:00:02.0: reg 0x10: [mem 0xdc300000-0xdc300fff]
[    0.864888] pci 0000:00:02.0: supports D1 D2
[    0.864898] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.864943] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.870644] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.870655] pci 0000:00:02.1: reg 0x10: [mem 0xdc303000-0xdc3030ff]
[    0.870695] pci 0000:00:02.1: supports D1 D2
[    0.870714] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.870799] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.876500] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.876516] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.876642] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.876652] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.876656] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.876660] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.876665] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.876669] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.876673] pci 0000:00:07.0: reg 0x24: [mem 0xdc301000-0xdc301fff]
[    0.876779] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.876789] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.876794] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.876798] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.876802] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.876806] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.876811] pci 0000:00:08.0: reg 0x24: [mem 0xdc302000-0xdc302fff]
[    0.876922] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.877003] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.882706] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.882748] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.882796] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.888495] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.888538] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.888619] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.894317] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.894341] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.894439] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.900138] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.900171] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.900259] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.905975] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.906089] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.906181] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.906285] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.906391] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.906492] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.906599] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.906698] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.906795] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.906886] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.907027] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.907041] pci 0000:01:04.0: reg 0x10: [mem 0xd4000000-0xd7ffffff pref]
[    0.907052] pci 0000:01:04.0: reg 0x14: [mem 0xdc000000-0xdc03ffff]
[    0.907058] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.907104] pci 0000:01:04.0: supports D1 D2
[    0.907172] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.912159] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.912162] pci 0000:00:09.0:   bridge window [mem 0xdc000000-0xdc0fffff]
[    0.912165] pci 0000:00:09.0:   bridge window [mem 0xd4000000-0xd7ffffff pref]
[    0.912237] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.912267] pci 0000:02:00.0: reg 0x10: [mem 0xdc100000-0xdc10ffff 64bit]
[    0.912301] pci 0000:02:00.0: reg 0x30: [mem 0x78400000-0x7840ffff pref]
[    0.912362] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.912410] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.922420] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.927398] pci 0000:00:0b.0:   bridge window [mem 0xdc100000-0xdc1fffff]
[    0.927486] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.927518] pci 0000:03:00.0: reg 0x10: [mem 0xdc200000-0xdc20ffff 64bit]
[    0.927611] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.927668] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.937674] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.942644] pci 0000:00:0c.0:   bridge window [mem 0xdc200000-0xdc2fffff]
[    0.942701] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.947726] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    0.952826] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    0.958958] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    0.965068] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.972346] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.979621] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    0.986898] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    0.994176] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.000284] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.006396] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.013685] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.020958] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.028232] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.034345] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.040457] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.047733] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0
[    1.054034] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0
[    1.060345] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.068853] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0
[    1.074316] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0
[    1.079783] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.086247] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.092781] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.097638] ACPI: \_SB_.PCI0: notify handler is installed
[    1.097670] Found 1 acpi root devices
[    1.097895] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.106011] vgaarb: loaded
[    1.108727] vgaarb: bridge control possible 0000:01:04.0
[    1.114340] SCSI subsystem initialized
[    1.118190] libata version 3.00 loaded.
[    1.118216] ACPI: bus type USB registered
[    1.122261] usbcore: registered new interface driver usbfs
[    1.127767] usbcore: registered new interface driver hub
[    1.133120] usbcore: registered new device driver usb
[    1.138364] PCI: Using ACPI for IRQ routing
[    1.142563] PCI: pci_cache_line_size set to 64 bytes
[    1.142615] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    1.142619] e820: reserve RAM buffer [mem 0x3ffb0000-0x3fffffff]
[    1.142758] NetLabel: Initializing
[    1.146174] NetLabel:  domain hash size = 128
[    1.150541] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.155525] NetLabel:  unlabeled traffic allowed by default
[    1.161195] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.168256] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.173328] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.182136] Switched to clocksource hpet
[    1.194861] AppArmor: AppArmor Filesystem Enabled
[    1.199656] pnp: PnP ACPI init
[    1.202752] ACPI: bus type PNP registered
[    1.207194] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.207248] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.207302] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.207353] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.207381] pnp 00:04: [dma 2]
[    1.207404] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.207477] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.207488] pnp: PnP ACPI: found 6 devices
[    1.211592] ACPI: bus type PNP unregistered
[    1.222777] pci 0000:02:00.0: no compatible bridge window for [mem 0x78400000-0x7840ffff pref]
[    1.231439] pci 0000:00:0b.0: BAR 15: can't assign mem pref (size 0x100000)
[    1.238408] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.243380] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.249483] pci 0000:00:09.0:   bridge window [mem 0xdc000000-0xdc0fffff]
[    1.256279] pci 0000:00:09.0:   bridge window [mem 0xd4000000-0xd7ffffff pref]
[    1.263511] pci 0000:02:00.0: BAR 6: assigned [mem 0xdc110000-0xdc11ffff pref]
[    1.270744] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.275720] pci 0000:00:0b.0:   bridge window [mem 0xdc100000-0xdc1fffff]
[    1.282520] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.287498] pci 0000:00:0c.0:   bridge window [mem 0xdc200000-0xdc2fffff]
[    1.294301] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.299281] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.304258] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
[    1.313313] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.313316] pci_bus 0000:00: resource 5 [mem 0xd4000000-0xd7ffffff]
[    1.313318] pci_bus 0000:00: resource 6 [mem 0xdc000000-0xdc3fffff]
[    1.313320] pci_bus 0000:00: resource 7 [io  0x0000-0x0cf7]
[    1.313322] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.313324] pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdc0fffff]
[    1.313326] pci_bus 0000:01: resource 2 [mem 0xd4000000-0xd7ffffff pref]
[    1.313329] pci_bus 0000:02: resource 1 [mem 0xdc100000-0xdc1fffff]
[    1.313331] pci_bus 0000:03: resource 1 [mem 0xdc200000-0xdc2fffff]
[    1.313392] NET: Registered protocol family 2
[    1.318003] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    1.325127] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    1.331758] TCP: Hash tables configured (established 8192 bind 8192)
[    1.338212] TCP: reno registered
[    1.341457] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.347401] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.353868] NET: Registered protocol family 1
[    1.358499] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.364516] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.370400] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.375936] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.381444] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.387035] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.392579] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.398086] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.403670] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.409199] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.414711] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.420295] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.425837] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.431335] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.436933] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.442454] pci 0000:01:04.0: Boot video device
[    1.442462] PCI: CLS 64 bytes, default 64
[    1.442577] Trying to unpack rootfs image as initramfs...
[    1.694419] Freeing initrd memory: 12996K (ffff88003f1d8000 - ffff88003fe89000)
[    1.702169] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.710105] LVT offset 1 assigned for vector 0x400
[    1.714922] IBS: LVT offset 1 assigned
[    1.718718] perf: AMD IBS detected (0x00000007)
[    1.723304] microcode: CPU0: patch_level=0x01000095
[    1.728207] microcode: CPU1: patch_level=0x01000095
[    1.733111] microcode: CPU2: patch_level=0x01000095
[    1.738017] microcode: CPU3: patch_level=0x01000095
[    1.742921] microcode: CPU4: patch_level=0x01000095
[    1.747820] microcode: CPU5: patch_level=0x01000095
[    1.752723] microcode: CPU6: patch_level=0x01000095
[    1.757619] microcode: CPU7: patch_level=0x01000095
[    1.762607] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.771404] Scanning for low memory corruption every 60 seconds
[    1.777676] Initialise system trusted keyring
[    1.782100] audit: initializing netlink socket (disabled)
[    1.787533] type=2000 audit(1422480235.528:1): initialized
[    1.821376] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.829327] VFS: Disk quotas dquot_6.5.2
[    1.833328] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.840378] fuse init (API version 7.22)
[    1.844395] msgmni has been set to 1980
[    1.848321] Key type big_key registered
[    1.852776] Key type asymmetric registered
[    1.856892] Asymmetric key parser 'x509' registered
[    1.861821] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.869292] io scheduler noop registered
[    1.873226] io scheduler deadline registered (default)
[    1.878404] io scheduler cfq registered
[    1.882402] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.882478] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.882548] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.882618] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.882706] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.882726] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.882746] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.882763] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.882776] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.889746] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.896285] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.896293] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.903259] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.909794] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.909802] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.916773] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.916780] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.923755] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.923770] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.929367] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.936054] ipmi message handler version 39.2
[    1.940495] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.948686] ACPI: Power Button [PWRB]
[    1.952409] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.959809] ACPI: Power Button [PWRF]
[    1.963725] GHES: HEST is not enabled!
[    1.967584] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.994256] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.021878] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.031084] Linux agpgart interface v0.103
[    2.037169] brd: module loaded
[    2.041245] loop: module loaded
[    2.044960] libphy: Fixed MDIO Bus: probed
[    2.049184] tun: Universal TUN/TAP device driver, 1.6
[    2.054245] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.060488] PPP generic driver version 2.4.2
[    2.064821] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.071364] ehci-pci: EHCI PCI platform driver
[    2.075971] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.081212] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.088625] ehci-pci 0000:00:02.1: debug port 1
[    2.093201] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.093229] ehci-pci 0000:00:02.1: irq 22, io mem 0xdc303000
[    2.110283] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.116122] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.122922] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.130152] usb usb1: Product: EHCI Host Controller
[    2.135038] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    2.141401] usb usb1: SerialNumber: 0000:00:02.1
[    2.146163] hub 1-0:1.0: USB hub found
[    2.149932] hub 1-0:1.0: 10 ports detected
[    2.154296] ehci-platform: EHCI generic platform driver
[    2.159543] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.165731] ohci-pci: OHCI PCI platform driver
[    2.170289] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.175877] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.183300] ohci-pci 0000:00:02.0: irq 23, io mem 0xdc300000
[    2.244327] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.251134] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.258368] usb usb2: Product: OHCI PCI host controller
[    2.263604] usb usb2: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    2.269966] usb usb2: SerialNumber: 0000:00:02.0
[    2.274835] hub 2-0:1.0: USB hub found
[    2.278622] hub 2-0:1.0: 10 ports detected
[    2.283000] ohci-platform: OHCI generic platform driver
[    2.288256] uhci_hcd: USB Universal Host Controller Interface driver
[    2.294695] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.305164] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.310165] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.315437] mousedev: PS/2 mouse device common for all mice
[    2.321253] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.326357] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.332758] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.340684] device-mapper: uevent: version 1.0.3
[    2.345397] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    2.353857] ledtrig-cpu: registered to indicate activity on CPUs
[    2.360035] TCP: cubic registered
[    2.363481] NET: Registered protocol family 10
[    2.368218] NET: Registered protocol family 17
[    2.372686] Key type dns_resolver registered
[    2.377482] Loading compiled-in X.509 certificates
[    2.383513] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
[    2.393032] registered taskstats version 1
[    2.400817] Key type trusted registered
[    2.407526] Key type encrypted registered
[    2.414416] AppArmor: AppArmor sha1 policy hashing enabled
[    2.419914] IMA: No TPM chip found, activating TPM-bypass!
[    2.425714] regulator-dummy: disabling
[    2.429545]   Magic number: 15:125:400
[    2.433474] rtc_cmos rtc_cmos: setting system clock to 2015-01-28 21:23:57 UTC (1422480237)
[    2.441976] acpi-cpufreq: overriding BIOS provided _PSD data
[    2.447983] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.454002] EDD information not available.
[    2.706373] tsc: Refined TSC clocksource calibration: 2311.847 MHz
[    3.710598] Switched to clocksource tsc
[   14.504073] PM: Hibernation image not present or could not be loaded.
[   14.506497] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
[   14.514375] Write protecting the kernel read-only data: 12288k
[   14.523524] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
[   14.533944] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
[   14.567881] systemd-udevd[146]: starting version 204
[   14.602263] FS-Cache: Loaded
[   14.605999] pps_core: LinuxPPS API ver. 1 registered
[   14.611906] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   14.621784] RPC: Registered named UNIX socket transport module.
[   14.627748] RPC: Registered udp transport module.
[   14.632488] RPC: Registered tcp transport module.
[   14.637243] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   14.643811] PTP clock support registered
[   14.652555] tg3.c:v3.134 (Sep 16, 2013)
[   14.656434] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[   14.662356] FS-Cache: Netfs 'nfs' registered for caching
[   14.662469] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[   14.701039] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[   14.711322] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[   14.721067] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   14.728906] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[   14.735699] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[   14.741569] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[   14.766195] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[   14.776465] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[   14.786210] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   14.794035] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[   14.804920] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[   14.852172] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.773084] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
[   18.779717] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[   18.786618] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.323848] random: init urandom read with 29 bits of entropy available
[   19.550954] init: plymouth-upstart-bridge main process (204) terminated with status 1
[   19.558859] init: plymouth-upstart-bridge main process ended, respawning
[   19.599609] init: plymouth-upstart-bridge main process (214) terminated with status 1
[   19.607510] init: plymouth-upstart-bridge main process ended, respawning
[   19.632177] init: plymouth-upstart-bridge main process (217) terminated with status 1
[   19.640084] init: plymouth-upstart-bridge main process ended, respawning
[   19.669157] init: plymouth-upstart-bridge main process (220) terminated with status 1
[   19.677039] init: plymouth-upstart-bridge main process ended, respawning
[   20.325682] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   20.483666] systemd-udevd[340]: starting version 204
[   20.552135] random: nonblocking pool is initialized
[   20.763390] w83627hf: w83627hf: Found W83627THF chip at 0x290
[   20.873150] MCE: In-kernel MCE decoding enabled.
[   20.875084] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[   20.883595] pata_amd 0000:00:06.0: version 0.4.1
[   20.884199] scsi0 : pata_amd
[   20.884340] scsi1 : pata_amd
[   20.884395] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[   20.884397] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[   20.884492] sata_nv 0000:00:07.0: version 3.5
[   20.884759] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[   20.885717] scsi2 : sata_nv
[   20.886150] scsi3 : sata_nv
[   20.886281] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[   20.886285] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[   20.886835] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[   20.887520] scsi4 : sata_nv
[   20.888283] scsi5 : sata_nv
[   20.888383] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[   20.888385] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[   20.888680] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   20.889246] Floppy drive(s): fd0 is 1.44M
[   20.890305] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[   20.898311] EDAC MC: Ver: 3.0.0
[   20.900306] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   20.909942] FDC 0 is a post-1991 82077
[   20.930924] xgifb: module is from the staging directory, the quality is unknown, you have been warned.
[   20.931850] xgifb 0000:01:04.0: Relocate IO address: 1000 [00001030]
[   20.931883] xgifb 0000:01:04.0: chipid = 31
[   20.932537] xgifb 0000:01:04.0: Framebuffer at 0xd4000000, mapped to 0xffffc90000980000, size 16384k
[   20.932540] xgifb 0000:01:04.0: MMIO at 0xdc000000, mapped to 0xffffc90000580000, size 256k
[   20.932571] xgifb 0000:01:04.0: Video BIOS corrupted
[   20.938050] AMD64 EDAC driver v3.4.0
[   20.945377] xgifb 0000:01:04.0: No or unknown bridge type detected
[   20.945385] xgifb: Default mode is 800x600x16 (60Hz)
[   20.948062] xgifb 0000:01:04.0: Added MTRR
[   20.949449] fbcon: XGI (fb0) is primary device
[   20.950133] Console: switching to colour frame buffer device 100x37
[   20.970350] kvm: Nested Virtualization enabled
[   20.970362] kvm: Nested Paging enabled
[   21.069121] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
[   21.069145] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[   21.197045] ata3: SATA link down (SStatus 0 SControl 300)
[   21.197051] ata5: SATA link down (SStatus 0 SControl 300)
[   21.305677] init: failsafe main process (476) killed by TERM signal
[   21.529106] ata4: SATA link down (SStatus 0 SControl 300)
[   21.841142] ata6: SATA link down (SStatus 0 SControl 300)
[   24.341516] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[   24.341617] EDAC amd64: DRAM ECC enabled.
[   24.341650] EDAC amd64: F10h detected (node 0).
[   24.341677] EDAC MC: DCT0 chip selects:
[   24.341680] EDAC amd64: MC: 0:  1024MB 1:     0MB
[   24.341681] EDAC amd64: MC: 2:     0MB 3:     0MB
[   24.341683] EDAC amd64: MC: 4:     0MB 5:     0MB
[   24.341685] EDAC amd64: MC: 6:     0MB 7:     0MB
[   24.341686] EDAC MC: DCT1 chip selects:
[   24.341687] EDAC amd64: MC: 0:     0MB 1:     0MB
[   24.341689] EDAC amd64: MC: 2:     0MB 3:     0MB
[   24.341711] EDAC amd64: MC: 4:     0MB 5:     0MB
[   24.341713] EDAC amd64: MC: 6:     0MB 7:     0MB
[   24.341715] EDAC amd64: using x4 syndromes.
[   24.341717] EDAC amd64: MCT channel count: 1
[   24.341798] EDAC amd64: CS0: Registered DDR2 RAM
[   24.342037] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[   24.342077] EDAC amd64: DRAM ECC disabled.
[   24.342091] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   24.342091]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   24.342091]  (Note that use of the override may cause unknown side effects.)
[   24.342147] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   24.574138] init: plymouth-upstart-bridge main process ended, respawning
[ 1201.321331] [Hardware Error]: MC4 Error (node 0): DRAM ECC error detected on the NB.
[ 1201.329375] EDAC MC0: 1 CE on mc#0csrow#0channel#0 (csrow:0 channel:0 page:0x14a44 offset:0x480 grain:0 syndrome:0x9872)
[ 1201.329382] [Hardware Error]: Error Status: Corrected error, no action required.
[ 1201.337001] [Hardware Error]: CPU:0 (10:2:2) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc39410098080a13
[ 1201.346695] [Hardware Error]: MC4_ADDR: 0x0000000014a44480
[ 1201.352349] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)
[ 1501.384549] [Hardware Error]: MC4 Error (node 0): DRAM ECC error detected on the NB.
[ 1501.392579] EDAC MC0: 1 CE on mc#0csrow#0channel#0 (csrow:0 channel:0 page:0x14a44 offset:0x480 grain:0 syndrome:0x9872)
[ 1501.392586] [Hardware Error]: Error Status: Corrected error, no action required.
[ 1501.400183] [Hardware Error]: CPU:0 (10:2:2) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc39410098080a13
[ 1501.409890] [Hardware Error]: MC4_ADDR: 0x0000000014a44480
[ 1501.415519] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)
[ 1801.447792] [Hardware Error]: MC4 Error (node 0): DRAM ECC error detected on the NB.
[ 1801.455869] EDAC MC0: 1 CE on mc#0csrow#0channel#0 (csrow:0 channel:0 page:0x14a44 offset:0x480 grain:0 syndrome:0x9872)
[ 1801.455875] [Hardware Error]: Error Status: Corrected error, no action required.
[ 1801.463469] [Hardware Error]: CPU:0 (10:2:2) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc39410098080a13
[ 1801.473175] [Hardware Error]: MC4_ADDR: 0x0000000014a44480
[ 1801.478825] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)
[ 2101.511009] [Hardware Error]: MC4 Error (node 0): DRAM ECC error detected on the NB.
[ 2101.519067] EDAC MC0: 1 CE on mc#0csrow#0channel#0 (csrow:0 channel:0 page:0x14a44 offset:0x480 grain:0 syndrome:0x9872)
[ 2101.519074] [Hardware Error]: Error Status: Corrected error, no action required.
[ 2101.526677] [Hardware Error]: CPU:0 (10:2:2) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc39410098080a13
[ 2101.536369] [Hardware Error]: MC4_ADDR: 0x0000000014a44480
[ 2101.542007] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)
[ 2401.574170] [Hardware Error]: MC4 Error (node 0): DRAM ECC error detected on the NB.
[ 2401.582187] EDAC MC0: 1 CE on mc#0csrow#0channel#0 (csrow:0 channel:0 page:0x14a44 offset:0x480 grain:0 syndrome:0x9872)
[ 2401.582194] [Hardware Error]: Error Status: Corrected error, no action required.
[ 2401.589787] [Hardware Error]: CPU:0 (10:2:2) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc39410098080a13
[ 2401.599472] [Hardware Error]: MC4_ADDR: 0x0000000014a44480
[ 2401.611925] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)
[ 2701.637343] [Hardware Error]: MC4 Error (node 0): DRAM ECC error detected on the NB.
[ 2701.652343] EDAC MC0: 1 CE on mc#0csrow#0channel#0 (csrow:0 channel:0 page:0x14a44 offset:0x480 grain:0 syndrome:0x9872)
[ 2701.652350] [Hardware Error]: Error Status: Corrected error, no action required.
[ 2701.666852] [Hardware Error]: CPU:0 (10:2:2) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc39410098080a13
[ 2701.690362] [Hardware Error]: MC4_ADDR: 0x0000000014a44480
[ 2701.702842] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)