[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-7) ) #1 SMP Debian 3.14.15-2 (2014-08-09)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=b993413c-46c8-4312-8280-c07e084e841e ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000aceb8fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000aceb9000-0x00000000af9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Google Parrot/Parrot, BIOS 4.0-6919-g85620db 09/13/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x24f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0AD000000 mask FFF000000 uncachable
[    0.000000]   1 base 0AE000000 mask FFE000000 uncachable
[    0.000000]   2 base 0B0000000 mask FF0000000 uncachable
[    0.000000]   3 base 0C0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0D0000000 mask FF0000000 write-combining
[    0.000000]   5 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xaceb9 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01aaf000, 0x01aaffff] PGTABLE
[    0.000000] BRK [0x01ab0000, 0x01ab0fff] PGTABLE
[    0.000000] BRK [0x01ab1000, 0x01ab1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x24f400000-0x24f5fffff]
[    0.000000]  [mem 0x24f400000-0x24f5fffff] page 2M
[    0.000000] BRK [0x01ab2000, 0x01ab2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x24c000000-0x24f3fffff]
[    0.000000]  [mem 0x24c000000-0x24f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x24bffffff]
[    0.000000]  [mem 0x200000000-0x24bffffff] page 2M
[    0.000000] BRK [0x01ab3000, 0x01ab3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xaceb8fff]
[    0.000000]  [mem 0x40200000-0xacdfffff] page 2M
[    0.000000]  [mem 0xace00000-0xaceb8fff] page 4k
[    0.000000] BRK [0x01ab4000, 0x01ab4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 2M
[    0.000000] RAMDISK: [mem 0x36588000-0x372bbfff]
[    0.000000] ACPI: RSDP 00000000000f1ce0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 00000000acfc70e0 00004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 00000000acfca730 0000F4 (v03 CORE   COREBOOT 00000000 CORE 00000001)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20131218/tbfadt-603)
[    0.000000] ACPI: DSDT 00000000acfc7250 0034D1 (v02 COREv4 COREBOOT 20110725 INTL 20140114)
[    0.000000] ACPI: FACS 00000000acfc7210 000040
[    0.000000] ACPI: SSDT 00000000acfca830 000827 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 00000000acfcb060 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 00000000acfcb0a0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 00000000acfcb100 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000024f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x24f5fffff]
[    0.000000]   NODE_DATA [mem 0x24f5f5000-0x24f5f9fff]
[    0.000000]  [ffffea0000000000-ffffea00081fffff] PMD -> [ffff880246c00000-ffff88024ddfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x24f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xaceb8fff]
[    0.000000]   node   0: [mem 0x100000000-0x24f5fffff]
[    0.000000] On node 0 totalpages: 2080855
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 158 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9614 pages used for memmap
[    0.000000]   DMA32 zone: 703161 pages, LIFO batch:31
[    0.000000]   Normal zone: 18781 pages used for memmap
[    0.000000]   Normal zone: 1373696 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xaceb9000-0xaf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[    0.000000] e820: [mem 0xafa00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88024f200000 s86080 r8192 d24512 u1048576
[    0.000000] pcpu-alloc: s86080 r8192 d24512 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2052246
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=b993413c-46c8-4312-8280-c07e084e841e ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8114988K/8323420K available (4957K kernel code, 747K rwdata, 1724K rodata, 1008K init, 960K bss, 208432K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1097.481 MHz processor
[    0.000064] Calibrating delay loop (skipped), value calculated using timer frequency.. 2194.96 BogoMIPS (lpj=4389924)
[    0.000069] pid_max: default: 32768 minimum: 301
[    0.000082] ACPI: Core revision 20131218
[    0.004517] ACPI: All ACPI Tables successfully acquired
[    0.006616] Security Framework initialized
[    0.006629] AppArmor: AppArmor disabled by boot time parameter
[    0.006631] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.007647] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.011159] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.012704] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.012725] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.013088] Initializing cgroup subsys memory
[    0.013097] Initializing cgroup subsys devices
[    0.013099] Initializing cgroup subsys freezer
[    0.013102] Initializing cgroup subsys net_cls
[    0.013104] Initializing cgroup subsys blkio
[    0.013106] Initializing cgroup subsys perf_event
[    0.013150] CPU: Physical Processor ID: 0
[    0.013152] CPU: Processor Core ID: 0
[    0.013161] mce: CPU supports 7 MCE banks
[    0.013183] CPU0: Thermal monitoring enabled (TM1)
[    0.013198] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.013198] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.013198] tlb_flushall_shift: 6
[    0.013375] Freeing SMP alternatives memory: 20K (ffffffff819b8000 - ffffffff819bd000)
[    0.016803] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.056490] smpboot: CPU0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz (fam: 06, model: 2a, stepping: 07)
[    0.056503] TSC deadline timer enabled
[    0.056516] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.056531] ... version:                3
[    0.056533] ... bit width:              48
[    0.056535] ... generic registers:      8
[    0.056537] ... value mask:             0000ffffffffffff
[    0.056539] ... max period:             0000ffffffffffff
[    0.056541] ... fixed-purpose events:   3
[    0.056543] ... event mask:             00000007000000ff
[    0.057511] x86: Booting SMP configuration:
[    0.057515] .... node  #0, CPUs:      #1
[    0.070604] x86: Booted up 1 node, 2 CPUs
[    0.070610] smpboot: Total of 2 processors activated (4389.92 BogoMIPS)
[    0.070708] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.072967] devtmpfs: initialized
[    0.079713] pinctrl core: initialized pinctrl subsystem
[    0.079828] NET: Registered protocol family 16
[    0.080006] cpuidle: using governor ladder
[    0.080009] cpuidle: using governor menu
[    0.080063] ACPI: bus type PCI registered
[    0.080066] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.080207] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.080212] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.080385] PCI: Using configuration type 1 for base access
[    0.082081] bio: create slab <bio-0> at 0
[    0.082269] ACPI: Added _OSI(Module Device)
[    0.082273] ACPI: Added _OSI(Processor Device)
[    0.082275] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.082277] ACPI: Added _OSI(Processor Aggregator Device)
[    0.088149] ACPI: Interpreter enabled
[    0.088161] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[    0.088170] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    0.088195] ACPI: (supports S0 S3 S4 S5)
[    0.088198] ACPI: Using IOAPIC for interrupt routing
[    0.088241] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.088452] ACPI: No dock devices found.
[    0.106638] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.106649] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.106749] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.106943] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
[    0.106952] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.107239] PCI host bridge to bus 0000:00
[    0.107245] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.107249] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.107253] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.107256] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.107260] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.107263] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.107266] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.107270] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.107273] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.107276] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.107280] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.107283] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.107286] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.107290] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.107293] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.107297] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[    0.107300] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfebfffff]
[    0.107304] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.107318] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.107485] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
[    0.107506] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[    0.107519] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.107528] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x103f]
[    0.107730] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.107770] pci 0000:00:16.0: reg 0x10: [mem 0xe0706100-0xe070610f 64bit]
[    0.107908] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.108074] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.108112] pci 0000:00:1a.0: reg 0x10: [mem 0xe0705800-0xe0705bff]
[    0.108266] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.108339] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.108426] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.108455] pci 0000:00:1b.0: reg 0x10: [mem 0xe0700000-0xe0703fff 64bit]
[    0.108608] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.108689] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.108773] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
[    0.108927] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.109078] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
[    0.109226] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.109394] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.109430] pci 0000:00:1d.0: reg 0x10: [mem 0xe0705c00-0xe0705fff]
[    0.109589] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.109660] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.109744] pci 0000:00:1f.0: [8086:1e5f] type 00 class 0x060100
[    0.110042] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.110081] pci 0000:00:1f.2: reg 0x10: [io  0x1060-0x1067]
[    0.110099] pci 0000:00:1f.2: reg 0x14: [io  0x1070-0x1073]
[    0.110116] pci 0000:00:1f.2: reg 0x18: [io  0x1068-0x106f]
[    0.110134] pci 0000:00:1f.2: reg 0x1c: [io  0x1074-0x1077]
[    0.110151] pci 0000:00:1f.2: reg 0x20: [io  0x1040-0x105f]
[    0.110169] pci 0000:00:1f.2: reg 0x24: [mem 0xe0705000-0xe07057ff]
[    0.110268] pci 0000:00:1f.2: PME# supported from D3hot
[    0.110409] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.110442] pci 0000:00:1f.3: reg 0x10: [mem 0xe0706000-0xe07060ff 64bit]
[    0.110483] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.110648] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[    0.110686] pci 0000:00:1f.6: reg 0x10: [mem 0xe0704000-0xe0704fff 64bit]
[    0.111068] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
[    0.111132] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe047ffff 64bit]
[    0.111287] pci 0000:01:00.0: reg 0x30: [mem 0xe0480000-0xe048ffff pref]
[    0.111472] pci 0000:01:00.0: supports D1 D2
[    0.111475] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.116730] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.116745] pci 0000:00:1c.0:   bridge window [mem 0xe0400000-0xe04fffff]
[    0.116949] pci 0000:02:00.0: [14e4:16b5] type 00 class 0x020000
[    0.117016] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe050ffff 64bit pref]
[    0.117070] pci 0000:02:00.0: reg 0x18: [mem 0xe0510000-0xe051ffff 64bit pref]
[    0.117168] pci 0000:02:00.0: reg 0x30: [mem 0xe0600000-0xe06007ff pref]
[    0.117399] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.117591] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
[    0.117657] pci 0000:02:00.1: reg 0x10: [mem 0xe0520000-0xe052ffff 64bit pref]
[    0.118012] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[    0.124754] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.124769] pci 0000:00:1c.1:   bridge window [mem 0xe0600000-0xe06fffff]
[    0.124783] pci 0000:00:1c.1:   bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
[    0.124979] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[    0.125075] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
[    0.125164] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[    0.125252] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
[    0.125338] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[    0.125423] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.125507] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.125592] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.125983] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.126059] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.126223] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.126228] vgaarb: loaded
[    0.126230] vgaarb: bridge control possible 0000:00:02.0
[    0.126307] PCI: Using ACPI for IRQ routing
[    0.130007] PCI: pci_cache_line_size set to 64 bytes
[    0.130106] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.130110] e820: reserve RAM buffer [mem 0xaceb9000-0xafffffff]
[    0.130113] e820: reserve RAM buffer [mem 0x24f600000-0x24fffffff]
[    0.130325] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.130336] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.132364] Switched to clocksource hpet
[    0.135909] pnp: PnP ACPI init
[    0.135940] ACPI: bus type PNP registered
[    0.136060] pnp 00:00: Plug and Play ACPI device, IDs PNP0c0e (active)
[    0.136176] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.136180] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.136184] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.136188] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.136192] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.136196] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.136200] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.136204] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.136208] system 00:01: [mem 0x20000000-0x201fffff] has been reserved
[    0.136212] system 00:01: [mem 0x40000000-0x401fffff] has been reserved
[    0.136217] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.136716] pnp 00:02: [dma 4]
[    0.136769] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.136821] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    0.137000] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.137005] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.137072] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.137152] system 00:06: [io  0x0500-0x057f] could not be reserved
[    0.137156] system 00:06: [io  0x0480-0x04bf] has been reserved
[    0.137160] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.137213] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.137293] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.137333] pnp: PnP ACPI: found 9 devices
[    0.137336] ACPI: bus type PNP unregistered
[    0.145569] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.145582] pci 0000:00:1c.0:   bridge window [mem 0xe0400000-0xe04fffff]
[    0.145598] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.145607] pci 0000:00:1c.1:   bridge window [mem 0xe0600000-0xe06fffff]
[    0.145615] pci 0000:00:1c.1:   bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
[    0.145628] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.145632] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.145636] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.145639] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.145643] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.145646] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.145649] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[    0.145653] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.145656] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.145659] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[    0.145662] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.145665] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.145669] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.145672] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[    0.145675] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
[    0.145679] pci_bus 0000:00: resource 19 [mem 0xafa00000-0xfebfffff]
[    0.145682] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff]
[    0.145686] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
[    0.145690] pci_bus 0000:02: resource 1 [mem 0xe0600000-0xe06fffff]
[    0.145693] pci_bus 0000:02: resource 2 [mem 0xe0500000-0xe05fffff 64bit pref]
[    0.145768] NET: Registered protocol family 2
[    0.146091] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.146427] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.146697] TCP: Hash tables configured (established 65536 bind 65536)
[    0.146744] TCP: reno registered
[    0.146769] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.146836] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.146987] NET: Registered protocol family 1
[    0.147011] pci 0000:00:02.0: Boot video device
[    0.147642] PCI: CLS 64 bytes, default 64
[    0.147720] Unpacking initramfs...
[    0.683789] Freeing initrd memory: 13520K (ffff880036588000 - ffff8800372bc000)
[    0.683798] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.683803] software IO TLB [mem 0xa8eb9000-0xaceb9000] (64MB) mapped at [ffff8800a8eb9000-ffff8800aceb8fff]
[    0.684051] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.684128] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[    0.684139] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[    0.684234] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.684671] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.684761] audit: initializing netlink subsys (disabled)
[    0.684790] audit: type=2000 audit(1410584706.684:1): initialized
[    0.713192] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.713505] VFS: Disk quotas dquot_6.5.2
[    0.713542] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.713638] msgmni has been set to 15876
[    0.714004] alg: No test for stdrng (krng)
[    0.714039] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.714085] io scheduler noop registered
[    0.714088] io scheduler deadline registered
[    0.714105] io scheduler cfq registered (default)
[    0.714423] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.714711] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.714891] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.714895] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.714903] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.714939] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.714942] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.714945] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[    0.714953] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.714977] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.715009] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.715077] intel_idle: MWAIT substates: 0x21120
[    0.715080] intel_idle: v0.4 model 0x2A
[    0.715082] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.715281] GHES: HEST is not enabled!
[    0.715373] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.716249] Linux agpgart interface v0.103
[    0.716432] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.716434] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.723521] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.723878] mousedev: PS/2 mouse device common for all mice
[    0.725394] rtc_cmos 00:07: RTC can wake from S4
[    0.725723] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.725765] rtc_cmos 00:07: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.725788] Intel P-state driver initializing.
[    0.725808] Intel pstate controlling: cpu 0
[    0.725842] Intel pstate controlling: cpu 1
[    0.725926] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.725928] AMD IOMMUv2 functionality not available on this system
[    0.726198] TCP: cubic registered
[    0.726365] NET: Registered protocol family 10
[    0.726743] mip6: Mobile IPv6
[    0.726749] NET: Registered protocol family 17
[    0.726756] mpls_gso: MPLS GSO support
[    0.727339] registered taskstats version 1
[    0.728196] rtc_cmos 00:07: setting system clock to 2014-09-13 05:05:07 UTC (1410584707)
[    0.728313] PM: Hibernation image not present or could not be loaded.
[    0.730003] Freeing unused kernel memory: 1008K (ffffffff818bc000 - ffffffff819b8000)
[    0.730008] Write protecting the kernel read-only data: 8192k
[    0.736850] Freeing unused kernel memory: 1176K (ffff8800014da000 - ffff880001600000)
[    0.738640] Freeing unused kernel memory: 324K (ffff8800017af000 - ffff880001800000)
[    0.759751] systemd-udevd[58]: starting version 208
[    0.760300] random: systemd-udevd urandom read with 2 bits of entropy available
[    0.774652] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.777545] SCSI subsystem initialized
[    0.782042] libata version 3.00 loaded.
[    0.783114] ahci 0000:00:1f.2: version 3.0
[    0.788668] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    0.788715] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.788747] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[    0.788753] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    0.789564] scsi0 : ahci
[    0.789723] scsi1 : ahci
[    0.789867] scsi2 : ahci
[    0.790011] scsi3 : ahci
[    0.790107] ata1: SATA max UDMA/133 abar m2048@0xe0705000 port 0xe0705100 irq 42
[    0.790110] ata2: DUMMY
[    0.790113] ata3: DUMMY
[    0.790115] ata4: DUMMY
[    0.790865] ACPI: bus type USB registered
[    0.790914] usbcore: registered new interface driver usbfs
[    0.790935] usbcore: registered new interface driver hub
[    0.790983] usbcore: registered new device driver usb
[    0.791615] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.791888] ehci-pci: EHCI PCI platform driver
[    0.792106] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.792118] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.792141] ehci-pci 0000:00:1a.0: debug port 2
[    0.796061] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.796104] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0705800
[    0.799222] pps_core: LinuxPPS API ver. 1 registered
[    0.799226] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.799523] PTP clock support registered
[    0.799730] sdhci: Secure Digital Host Controller Interface driver
[    0.799735] sdhci: Copyright(c) Pierre Ossman
[    0.800597] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10)
[    0.801226] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA
[    0.801252] tg3.c:v3.136 (Jan 03, 2014)
[    0.802869] thermal LNXTHERM:00: registered as thermal_zone0
[    0.802874] ACPI: Thermal Zone [THRM] (52 C)
[    0.804931] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.806497] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.806503] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.806506] usb usb1: Product: EHCI Host Controller
[    0.806509] usb usb1: Manufacturer: Linux 3.14-2-amd64 ehci_hcd
[    0.806512] usb usb1: SerialNumber: 0000:00:1a.0
[    0.807010] hub 1-0:1.0: USB hub found
[    0.807031] hub 1-0:1.0: 3 ports detected
[    0.807883] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.807896] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.808183] ehci-pci 0000:00:1d.0: debug port 2
[    0.812112] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.812921] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0705c00
[    0.827952] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.828266] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.828271] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.828275] usb usb2: Product: EHCI Host Controller
[    0.828278] usb usb2: Manufacturer: Linux 3.14-2-amd64 ehci_hcd
[    0.828281] usb usb2: SerialNumber: 0000:00:1d.0
[    0.828999] hub 2-0:1.0: USB hub found
[    0.829199] hub 2-0:1.0: 3 ports detected
[    0.831081] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address 20:89:84:5d:2e:1a
[    0.831088] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[    0.831092] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    0.831096] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[    1.108475] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.116484] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.118064] ata1.00: ATA-8: ST320LT012-9WS14C, 0001SDM1, max UDMA/133
[    1.118072] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.160286] ata1.00: configured for UDMA/133
[    1.160789] scsi 0:0:0:0: Direct-Access     ATA      ST320LT012-9WS14 0001 PQ: 0 ANSI: 5
[    1.166877] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.166886] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.166978] sd 0:0:0:0: [sda] Write Protect is off
[    1.166984] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.167023] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.209817]  sda: sda1 sda2 < sda5 >
[    1.211328] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.212626] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.248995] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.249006] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.249696] hub 1-1:1.0: USB hub found
[    1.249799] hub 1-1:1.0: 4 ports detected
[    1.360399] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.492930] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.492941] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.493484] hub 2-1:1.0: USB hub found
[    1.493639] hub 2-1:1.0: 4 ports detected
[    1.564528] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    1.658785] usb 1-1.1: string descriptor 0 read error: -22
[    1.658866] usb 1-1.1: New USB device found, idVendor=0489, idProduct=e04e
[    1.658872] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.680456] tsc: Refined TSC clocksource calibration: 1097.518 MHz
[    1.732583] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[    1.876713] usb 1-1.3: New USB device found, idVendor=064e, idProduct=d251
[    1.876723] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.876727] usb 1-1.3: Product: HD WebCam
[    1.876731] usb 1-1.3: Manufacturer: SuYin
[    1.876735] usb 1-1.3: SerialNumber: HF1016-A21U-OV02-VA-R01.00.03
[    2.146420] PM: Starting manual resume from disk
[    2.146430] PM: Hibernation image partition 8:5 present
[    2.146433] PM: Looking for hibernation image.
[    2.146732] PM: Image not found (code -22)
[    2.146736] PM: Hibernation image not present or could not be loaded.
[    2.264883] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.680515] Switched to clocksource tsc
[    3.007764] random: nonblocking pool is initialized
[    3.320657] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    3.530754] systemd[1]: Inserted module 'autofs4'
[    3.537916] systemd[1]: Set hostname to <scooty>.
[    4.553505] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    4.553643] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.553674] systemd[1]: Starting Remote File Systems (Pre).
[    4.553700] systemd[1]: Reached target Remote File Systems (Pre).
[    4.553720] systemd[1]: Starting Syslog Socket.
[    4.553798] systemd[1]: Listening on Syslog Socket.
[    4.553822] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    4.553865] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.553884] systemd[1]: Starting Delayed Shutdown Socket.
[    4.553922] systemd[1]: Listening on Delayed Shutdown Socket.
[    4.553946] systemd[1]: Starting Encrypted Volumes.
[    4.553966] systemd[1]: Reached target Encrypted Volumes.
[    4.553987] systemd[1]: Starting Journal Socket.
[    4.554060] systemd[1]: Listening on Journal Socket.
[    4.554247] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    4.555208] systemd[1]: Mounting POSIX Message Queue File System...
[    4.555858] systemd[1]: Starting Syslog.
[    4.555886] systemd[1]: Reached target Syslog.
[    4.635480] systemd[1]: Starting Load Kernel Modules...
[    4.636341] systemd[1]: Starting Journal Service...
[    4.637063] systemd[1]: Started Journal Service.
[    4.837956] fuse init (API version 7.22)
[    5.824432] systemd-udevd[153]: starting version 208
[    8.329967] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[    8.452091] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    8.452175] ACPI: Lid Switch [LID0]
[    8.452335] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    8.452344] ACPI: Power Button [PWRB]
[    8.452439] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[    8.452444] ACPI: Sleep Button [TPAD]
[    8.452565] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    8.452570] ACPI: Power Button [PWRF]
[    8.463203] ACPI: AC Adapter [AC] (on-line)
[    8.471033] [Firmware Bug]: battery: (dis)charge rate invalid.
[    8.471093] ACPI: Battery Slot [BATX] (battery present)
[    8.489508] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.528160] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\PMIO) (20131218/utaddress-258)
[    8.528175] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.528183] ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20131218/utaddress-258)
[    8.528190] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.528194] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20131218/utaddress-258)
[    8.528200] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.528203] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.589713] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    8.604680] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    8.710521] alg: No test for crc32 (crc32-pclmul)
[    8.742625] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    8.749978] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    9.064345] [drm] Initialized drm 1.1.0 20060810
[    9.147270] iTCO_vendor_support: vendor-support=0
[    9.147921] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    9.147976] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[    9.148151] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    9.259551] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[    9.418445] input: Cypress APA Trackpad (cyapa) as /devices/pci0000:00/0000:00:1f.3/i2c-0/0-0067/input/input7
[    9.488420] systemd-journald[131]: Received request to flush runtime journal from PID 1
[    9.544386] Bluetooth: Core ver 2.18
[    9.544418] NET: Registered protocol family 31
[    9.544421] Bluetooth: HCI device and connection manager initialized
[    9.544431] Bluetooth: HCI socket layer initialized
[    9.544435] Bluetooth: L2CAP socket layer initialized
[    9.544452] Bluetooth: SCO socket layer initialized
[    9.568648] usbcore: registered new interface driver btusb
[    9.654553] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    9.654727] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    9.656534] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    9.658199] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    9.658355] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    9.698741] cfg80211: Calling CRDA to update world regulatory domain
[    9.922222] [drm] Memory usable by graphics device = 2048M
[    9.984296] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[    9.984320] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.984323] [drm] Driver supports precise vblank timestamp query.
[    9.984448] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   10.016479] [drm] Wrong MCH_SSKPD value: 0x16040307
[   10.016486] [drm] This can cause pipe underruns and display issues.
[   10.016488] [drm] Please upgrade your BIOS to fix this.
[   10.034385] fbcon: inteldrmfb (fb0) is primary device
[   10.087847] media: Linux media interface: v0.10
[   10.110530] Linux video capture interface: v2.00
[   10.262633] usb 1-1.1: firmware: failed to load ar3k/AthrBT_0x11020000.dfu (-2)
[   10.262636] usb 1-1.1: Direct firmware load failed with error -2
[   10.262639] usb 1-1.1: Falling back to user helper
[   10.263806] Bluetooth: Loading patch file failed
[   10.263815] ath3k: probe of 1-1.1:1.0 failed with error -2
[   10.263867] usbcore: registered new interface driver ath3k
[   10.643240] uvcvideo: Found UVC 1.00 device HD WebCam (064e:d251)
[   10.647133] ath: phy0: ASPM enabled: 0x43
[   10.647137] ath: EEPROM regdomain: 0x6c
[   10.647138] ath: EEPROM indicates we should expect a direct regpair map
[   10.647141] ath: Country alpha2 being used: 00
[   10.647142] ath: Regpair used: 0x6c
[   10.647718] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
[   10.648061] usbcore: registered new interface driver uvcvideo
[   10.648062] USB Video Class driver (1.1.1)
[   10.686971] Console: switching to colour frame buffer device 170x48
[   10.693648] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   10.693653] i915 0000:00:02.0: registered panic notifier
[   10.694201] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.694460] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input14
[   10.694615] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   10.853554] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.854131] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90015980000, irq=17
[   11.302299] cfg80211: World regulatory domain updated:
[   11.302308] cfg80211:  DFS Master region: unset
[   11.302312] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.302317] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   11.302321] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   11.302324] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   11.302327] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   11.302331] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   11.302334] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[   11.808580] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   12.054483] Adding 12683260k swap on /dev/sda5.  Priority:-1 extents:1 across:12683260k 
[   12.607580] RPC: Registered named UNIX socket transport module.
[   12.607588] RPC: Registered udp transport module.
[   12.607591] RPC: Registered tcp transport module.
[   12.607594] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   12.663732] FS-Cache: Loaded
[   12.704267] FS-Cache: Netfs 'nfs' registered for caching
[   12.783422] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   18.607117] tg3 0000:02:00.0: irq 46 for MSI/MSI-X
[   18.607127] tg3 0000:02:00.0: irq 47 for MSI/MSI-X
[   18.607135] tg3 0000:02:00.0: irq 48 for MSI/MSI-X
[   19.171224] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.186080] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   26.345149] wlan0: authenticate with c8:d3:a3:70:a5:f6
[   26.355968] wlan0: send auth to c8:d3:a3:70:a5:f6 (try 1/3)
[   26.358274] wlan0: authenticated
[   26.363962] wlan0: associate with c8:d3:a3:70:a5:f6 (try 1/3)
[   26.367714] wlan0: RX AssocResp from c8:d3:a3:70:a5:f6 (capab=0x431 status=0 aid=2)
[   26.367786] wlan0: associated
[   26.367828] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   26.367874] cfg80211: Calling CRDA for country: US
[   26.462910] ath: EEPROM regdomain: 0x8348
[   26.462917] ath: EEPROM indicates we should expect a country code
[   26.462920] ath: doing EEPROM country->regdmn map search
[   26.462923] ath: country maps to regdmn code: 0x3a
[   26.462926] ath: Country alpha2 being used: US
[   26.462928] ath: Regpair used: 0x3a
[   26.462931] ath: regdomain 0x8348 dynamically updated by country IE
[   26.462964] cfg80211: Regulatory domain changed to country: US
[   26.462966] cfg80211:  DFS Master region: FCC
[   26.462969] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   26.462973] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[   26.462975] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
[   26.462978] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
[   26.462981] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
[   26.462984] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)