[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt 
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffa0000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 02/02/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 base 0080000000 mask FFC0000000 write-back
[    0.000000]   2 base 00F8000000 mask FFFC000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000140000000 aka 5120M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0c70-0x000f0c7f] mapped at [ffff8800000f0c70]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[    0.000000]  [mem 0x13fe00000-0x13fffffff] page 2M
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[    0.000000]  [mem 0x13c000000-0x13fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[    0.000000]  [mem 0x100000000-0x13bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbff9ffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbff9ffff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0E10 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000BFFB90E0 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000BFFBB8D0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000BFFB9280 002648 (v02 ASUS   COREBOOT 00000001 INTL 20150619)
[    0.000000] ACPI: FACS 0x00000000BFFB9240 000040
[    0.000000] ACPI: SSDT 0x00000000BFFBB9D0 0006BD (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0x00000000BFFBC090 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000BFFBC0D0 00008E (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFBC160 0000E8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFBC250 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000BFFBC280 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFBC2C0 0000E8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFBC3B0 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=2
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13fff7000-0x13fffbfff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x13fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbff9ffff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000] On node 0 totalpages: 1048382
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10695 pages used for memmap
[    0.000000]   DMA32 zone: 782240 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffa0000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1034026
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xe1c0000000-0xe1c1ffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[    0.000000] Memory: 3983824K/4193528K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 209704K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3015.537 MHz processor
[    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[    0.016000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6031.07 BogoMIPS (lpj=12062148)
[    0.020001] pid_max: default: 32768 minimum: 301
[    0.024011] ACPI: Core revision 20140424
[    0.029305] ACPI: All ACPI Tables successfully acquired
[    0.032231] Security Framework initialized
[    0.036013] AppArmor: AppArmor disabled by boot time parameter
[    0.040001] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.048121] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.057853] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.061246] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.064011] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.072345] Initializing cgroup subsys memory
[    0.076010] Initializing cgroup subsys devices
[    0.080010] Initializing cgroup subsys freezer
[    0.084003] Initializing cgroup subsys net_cls
[    0.088007] Initializing cgroup subsys blkio
[    0.092005] Initializing cgroup subsys perf_event
[    0.096002] Initializing cgroup subsys net_prio
[    0.100028] tseg: 0000000000
[    0.100034] CPU: Physical Processor ID: 0
[    0.104002] CPU: Processor Core ID: 0
[    0.108002] mce: CPU supports 5 MCE banks
[    0.112008] LVT offset 0 assigned for vector 0xf9
[    0.116003] process: using AMD E400 aware idle routine
[    0.120003] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
[    0.128058] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.136671] ftrace: allocating 21601 entries in 85 pages
[    0.148433] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.194536] smpboot: CPU0: Dual-Core AMD Opteron(tm) Processor 8222 (fam: 0f, model: 41, stepping: 03)
[    0.204000] Performance Events: AMD PMU driver.
[    0.204003] ... version:                0
[    0.208000] ... bit width:              48
[    0.212000] ... generic registers:      4
[    0.216000] ... value mask:             0000ffffffffffff
[    0.220000] ... max period:             00007fffffffffff
[    0.224000] ... fixed-purpose events:   0
[    0.228000] ... event mask:             000000000000000f
[    0.233561] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.236154] x86: Booting SMP configuration:
[    0.240001] .... node  #0, CPUs:      #1 #2 #3
[    0.512112] x86: Booted up 1 node, 4 CPUs
[    0.516001] smpboot: Total of 4 processors activated (24123.60 BogoMIPS)
[    0.524103] devtmpfs: initialized
[    0.533273] pinctrl core: initialized pinctrl subsystem
[    0.536094] NET: Registered protocol family 16
[    0.540134] cpuidle: using governor ladder
[    0.544002] cpuidle: using governor menu
[    0.548005] node 0 link 1: io port [1000, 5fff]
[    0.548008] TOM: 00000000c0000000 aka 3072M
[    0.552002] node 0 link 1: mmio [a0000, bffff]
[    0.552004] node 0 link 1: mmio [fc000000, fc5fffff]
[    0.552006] node 0 link 1: mmio [f8000000, fbffffff]
[    0.552007] TOM2: 0000000140000000 aka 5120M
[    0.556002] bus: [bus 00-08] on node 0 link 1
[    0.556003] bus: 00 [io  0x0000-0xffff]
[    0.556005] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.556006] bus: 00 [mem 0xc0000000-0xffffffff]
[    0.556007] bus: 00 [mem 0x140000000-0xfcffffffff]
[    0.556054] ACPI: bus type PCI registered
[    0.560002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.564093] PCI: Using configuration type 1 for base access
[    0.584086] ACPI: Added _OSI(Module Device)
[    0.588002] ACPI: Added _OSI(Processor Device)
[    0.592001] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.596001] ACPI: Added _OSI(Processor Aggregator Device)
[    0.604929] ACPI: Interpreter enabled
[    0.608009] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.616001] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.626188] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.636004] ACPI: (supports S0 S1 S5)
[    0.639662] ACPI: Using IOAPIC for interrupt routing
[    0.640027] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.649286] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-08])
[    0.652006] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.656011] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.661572] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.664005] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.668114] PCI host bridge to bus 0000:00
[    0.672003] pci_bus 0000:00: root bus resource [bus 00-08]
[    0.676002] pci_bus 0000:00: root bus resource [io  0x0d00-0x5fff]
[    0.680001] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.684001] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc5fffff]
[    0.688001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.692001] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.696010] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.696125] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.696130] pci 0000:00:01.0: reg 0x10: [io  0x4c00-0x4c7f]
[    0.696205] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.696211] pci 0000:00:01.1: reg 0x10: [io  0x5000-0x501f]
[    0.696220] pci 0000:00:01.1: reg 0x20: [io  0x4c80-0x4cbf]
[    0.696223] pci 0000:00:01.1: reg 0x24: [io  0x4cc0-0x4cff]
[    0.696234] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.696301] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.696307] pci 0000:00:02.0: reg 0x10: [mem 0xfc500000-0xfc500fff]
[    0.696327] pci 0000:00:02.0: supports D1 D2
[    0.696329] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.696361] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.700042] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.700048] pci 0000:00:02.1: reg 0x10: [mem 0xfc503000-0xfc5030ff]
[    0.700073] pci 0000:00:02.1: supports D1 D2
[    0.700074] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.700106] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.704045] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.704057] pci 0000:00:06.0: reg 0x20: [io  0x5020-0x502f]
[    0.704064] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.708001] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.712004] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.716001] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.720063] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.720069] pci 0000:00:07.0: reg 0x10: [io  0x5050-0x5057]
[    0.720073] pci 0000:00:07.0: reg 0x14: [io  0x5070-0x5073]
[    0.720076] pci 0000:00:07.0: reg 0x18: [io  0x5058-0x505f]
[    0.720079] pci 0000:00:07.0: reg 0x1c: [io  0x5074-0x5077]
[    0.720083] pci 0000:00:07.0: reg 0x20: [io  0x5030-0x503f]
[    0.720086] pci 0000:00:07.0: reg 0x24: [mem 0xfc501000-0xfc501fff]
[    0.720151] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.720157] pci 0000:00:08.0: reg 0x10: [io  0x5060-0x5067]
[    0.720160] pci 0000:00:08.0: reg 0x14: [io  0x5078-0x507b]
[    0.720163] pci 0000:00:08.0: reg 0x18: [io  0x5068-0x506f]
[    0.720167] pci 0000:00:08.0: reg 0x1c: [io  0x507c-0x507f]
[    0.720170] pci 0000:00:08.0: reg 0x20: [io  0x5040-0x504f]
[    0.720174] pci 0000:00:08.0: reg 0x24: [mem 0xfc502000-0xfc502fff]
[    0.720238] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.720280] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.724041] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.724062] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.724093] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.728042] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.728061] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.728093] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.732041] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.732060] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.732091] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.736042] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.736060] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.736093] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.740047] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.740114] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.740176] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.740237] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.740301] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000
[    0.740369] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000
[    0.740429] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000
[    0.740491] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000
[    0.740590] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.740599] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.740605] pci 0000:01:04.0: reg 0x14: [mem 0xfc200000-0xfc23ffff]
[    0.740610] pci 0000:01:04.0: reg 0x18: [io  0x3000-0x307f]
[    0.740640] pci 0000:01:04.0: supports D1 D2
[    0.740692] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.744002] pci 0000:00:09.0:   bridge window [io  0x3000-0x3fff]
[    0.744005] pci 0000:00:09.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.744007] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.744057] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.744069] pci 0000:02:00.0: reg 0x10: [mem 0xfc300000-0xfc30ffff 64bit]
[    0.744092] pci 0000:02:00.0: reg 0x30: [mem 0x0d080000-0x0d08ffff pref]
[    0.744132] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.744184] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.748007] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.752003] pci 0000:00:0b.0:   bridge window [mem 0xfc300000-0xfc3fffff]
[    0.752053] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.752065] pci 0000:03:00.0: reg 0x10: [mem 0xfc400000-0xfc40ffff 64bit]
[    0.752126] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.752177] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.756005] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.760003] pci 0000:00:0c.0:   bridge window [mem 0xfc400000-0xfc4fffff]
[    0.760041] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.764046] pci 0000:05:00.0: [111d:8018] type 01 class 0x060400
[    0.764086] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.764133] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.768004] pci 0000:00:0e.0: PCI bridge to [bus 05-08]
[    0.772002] pci 0000:00:0e.0:   bridge window [io  0x1000-0x2fff]
[    0.772005] pci 0000:00:0e.0:   bridge window [mem 0xfc000000-0xfc1fffff]
[    0.772049] pci 0000:06:00.0: [111d:8018] type 01 class 0x060400
[    0.772098] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.772145] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.776008] pci 0000:06:01.0: [111d:8018] type 01 class 0x060400
[    0.780001] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
[    0.780048] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.784020] pci 0000:05:00.0: PCI bridge to [bus 06-08]
[    0.788005] pci 0000:05:00.0:   bridge window [io  0x1000-0x2fff]
[    0.788009] pci 0000:05:00.0:   bridge window [mem 0xfc000000-0xfc1fffff]
[    0.788069] pci 0000:07:00.0: [8086:10bc] type 00 class 0x020000
[    0.788081] pci 0000:07:00.0: reg 0x10: [mem 0xfc000000-0xfc01ffff]
[    0.788091] pci 0000:07:00.0: reg 0x14: [mem 0xfc020000-0xfc03ffff]
[    0.788100] pci 0000:07:00.0: reg 0x18: [io  0x1000-0x101f]
[    0.788132] pci 0000:07:00.0: reg 0x30: [mem 0xfc040000-0xfc05ffff pref]
[    0.788173] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[    0.788234] pci 0000:07:00.1: [8086:10bc] type 00 class 0x020000
[    0.788246] pci 0000:07:00.1: reg 0x10: [mem 0xfc060000-0xfc07ffff]
[    0.788256] pci 0000:07:00.1: reg 0x14: [mem 0xfc080000-0xfc09ffff]
[    0.788265] pci 0000:07:00.1: reg 0x18: [io  0x1020-0x103f]
[    0.788296] pci 0000:07:00.1: reg 0x30: [mem 0xfc0a0000-0xfc0bffff pref]
[    0.788338] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
[    0.788392] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.792009] pci 0000:06:00.0: PCI bridge to [bus 07]
[    0.796005] pci 0000:06:00.0:   bridge window [io  0x1000-0x1fff]
[    0.796009] pci 0000:06:00.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.796071] pci 0000:08:00.0: [8086:10bc] type 00 class 0x020000
[    0.796083] pci 0000:08:00.0: reg 0x10: [mem 0xfc100000-0xfc11ffff]
[    0.796092] pci 0000:08:00.0: reg 0x14: [mem 0xfc120000-0xfc13ffff]
[    0.796102] pci 0000:08:00.0: reg 0x18: [io  0x2000-0x201f]
[    0.796133] pci 0000:08:00.0: reg 0x30: [mem 0xfc140000-0xfc15ffff pref]
[    0.796175] pci 0000:08:00.0: PME# supported from D0 D3hot
[    0.796237] pci 0000:08:00.1: [8086:10bc] type 00 class 0x020000
[    0.796249] pci 0000:08:00.1: reg 0x10: [mem 0xfc160000-0xfc17ffff]
[    0.796258] pci 0000:08:00.1: reg 0x14: [mem 0xfc180000-0xfc19ffff]
[    0.796267] pci 0000:08:00.1: reg 0x18: [io  0x2020-0x203f]
[    0.796299] pci 0000:08:00.1: reg 0x30: [mem 0xfc1a0000-0xfc1bffff pref]
[    0.796341] pci 0000:08:00.1: PME# supported from D0 D3hot
[    0.796395] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.800009] pci 0000:06:01.0: PCI bridge to [bus 08]
[    0.804005] pci 0000:06:01.0:   bridge window [io  0x2000-0x2fff]
[    0.804009] pci 0000:06:01.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.804044] pci_bus 0000:00: on NUMA node 0
[    0.804102] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    0.812051] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    0.817547] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.825217] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.832246] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    0.838710] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    0.842709] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    0.848987] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    0.853547] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    0.862432] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    0.869598] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    0.876243] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    0.881541] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    0.888911] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    0.896245] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    0.902709] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    0.906710] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.915177] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    0.921598] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    0.928015] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    0.933876] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    0.940401] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.944091] vgaarb: setting as boot device: PCI:0000:01:04.0
[    0.948000] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    0.956008] vgaarb: loaded
[    0.960001] vgaarb: bridge control possible 0000:01:04.0
[    0.964117] PCI: Using ACPI for IRQ routing
[    0.972004] PCI: pci_cache_line_size set to 64 bytes
[    0.972065] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.972067] e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff]
[    0.972256] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.976005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.984191] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.992041] Switched to clocksource hpet
[    1.004765] pnp: PnP ACPI init
[    1.007849] ACPI: bus type PNP registered
[    1.012254] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.012305] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.012360] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.012412] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.012440] pnp 00:04: [dma 2]
[    1.012465] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.012480] pnp: PnP ACPI: found 5 devices
[    1.016580] ACPI: bus type PNP unregistered
[    1.027977] pci 0000:02:00.0: can't claim BAR 6 [mem 0x0d080000-0x0d08ffff pref]: no compatible bridge window
[    1.037933] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.042901] pci 0000:00:09.0:   bridge window [io  0x3000-0x3fff]
[    1.048992] pci 0000:00:09.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.055779] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.063003] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc310000-0xfc31ffff pref]
[    1.070220] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.075182] pci 0000:00:0b.0:   bridge window [mem 0xfc300000-0xfc3fffff]
[    1.081971] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.086935] pci 0000:00:0c.0:   bridge window [mem 0xfc400000-0xfc4fffff]
[    1.093722] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.098689] pci 0000:06:00.0: PCI bridge to [bus 07]
[    1.103652] pci 0000:06:00.0:   bridge window [io  0x1000-0x1fff]
[    1.109749] pci 0000:06:00.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.116537] pci 0000:06:01.0: PCI bridge to [bus 08]
[    1.121496] pci 0000:06:01.0:   bridge window [io  0x2000-0x2fff]
[    1.127584] pci 0000:06:01.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.134373] pci 0000:05:00.0: PCI bridge to [bus 06-08]
[    1.139594] pci 0000:05:00.0:   bridge window [io  0x1000-0x2fff]
[    1.145689] pci 0000:05:00.0:   bridge window [mem 0xfc000000-0xfc1fffff]
[    1.152478] pci 0000:00:0e.0: PCI bridge to [bus 05-08]
[    1.157697] pci 0000:00:0e.0:   bridge window [io  0x1000-0x2fff]
[    1.163791] pci 0000:00:0e.0:   bridge window [mem 0xfc000000-0xfc1fffff]
[    1.170578] pci_bus 0000:00: resource 4 [io  0x0d00-0x5fff]
[    1.170580] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
[    1.170582] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc5fffff]
[    1.170584] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[    1.170586] pci_bus 0000:00: resource 8 [io  0x0000-0x0cf7]
[    1.170588] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    1.170590] pci_bus 0000:01: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.170592] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.170594] pci_bus 0000:02: resource 1 [mem 0xfc300000-0xfc3fffff]
[    1.170597] pci_bus 0000:03: resource 1 [mem 0xfc400000-0xfc4fffff]
[    1.170599] pci_bus 0000:05: resource 0 [io  0x1000-0x2fff]
[    1.170601] pci_bus 0000:05: resource 1 [mem 0xfc000000-0xfc1fffff]
[    1.170603] pci_bus 0000:06: resource 0 [io  0x1000-0x2fff]
[    1.170605] pci_bus 0000:06: resource 1 [mem 0xfc000000-0xfc1fffff]
[    1.170607] pci_bus 0000:07: resource 0 [io  0x1000-0x1fff]
[    1.170609] pci_bus 0000:07: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.170612] pci_bus 0000:08: resource 0 [io  0x2000-0x2fff]
[    1.170614] pci_bus 0000:08: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.170687] NET: Registered protocol family 2
[    1.175361] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.182786] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.189700] TCP: Hash tables configured (established 32768 bind 32768)
[    1.196310] TCP: reno registered
[    1.199546] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.205598] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.212208] NET: Registered protocol family 1
[    1.216849] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.222825] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.228665] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.234171] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.239652] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.245227] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.250734] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.256222] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.261797] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.267308] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.272792] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.278368] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.283882] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.289364] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.294939] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.300440] pci 0000:01:04.0: Video device with shadowed ROM
[    1.300465] PCI: CLS 64 bytes, default 64
[    1.300545] Unpacking initramfs...
[    1.467834] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.475479] PCI-DMA: Disabling AGP.
[    1.479111] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    1.484684] PCI-DMA: using GART IOMMU.
[    1.488439] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.498623] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.506427] microcode: AMD CPU family 0xf not supported
[    1.512069] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.518310] audit: initializing netlink subsys (disabled)
[    1.523746] audit: type=2000 audit(1454382472.520:1): initialized
[    1.530270] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.536652] zbud: loaded
[    1.539381] VFS: Disk quotas dquot_6.5.2
[    1.543328] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.549834] msgmni has been set to 7926
[    1.554104] alg: No test for stdrng (krng)
[    1.558250] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.565713] io scheduler noop registered
[    1.569637] io scheduler deadline registered
[    1.573953] io scheduler cfq registered (default)
[    1.578956] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.584543] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.591238] GHES: HEST is not enabled!
[    1.595064] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.621598] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.649209] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.656928] Linux agpgart interface v0.103
[    1.661141] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    1.671355] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.676327] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.681597] mousedev: PS/2 mouse device common for all mice
[    1.687259] rtc_cmos rtc_cmos: RTC can wake from S4
[    1.692291] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    1.698662] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.706506] ledtrig-cpu: registered to indicate activity on CPUs
[    1.712606] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    1.719041] AMD IOMMUv2 functionality not available on this system
[    1.725324] TCP: cubic registered
[    1.728712] NET: Registered protocol family 10
[    1.733459] mip6: Mobile IPv6
[    1.736438] NET: Registered protocol family 17
[    1.740882] mpls_gso: MPLS GSO support
[    1.745041] registered taskstats version 1
[    1.749734] rtc_cmos rtc_cmos: setting system clock to 2016-02-02 03:07:54 UTC (1454382474)
[    1.758144] PM: Hibernation image not present or could not be loaded.
[    1.759413] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    1.767265] Write protecting the kernel read-only data: 8192k
[    1.775418] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    1.783701] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    1.800080] systemd-udevd[72]: starting version 215
[    1.805351] random: systemd-udevd urandom read with 3 bits of entropy available
[    1.821901] pps_core: LinuxPPS API ver. 1 registered
[    1.826889] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.836196] ACPI: bus type USB registered
[    1.840292] usbcore: registered new interface driver usbfs
[    1.845989] usbcore: registered new interface driver hub
[    1.848531] PTP clock support registered
[    1.855559] usbcore: registered new device driver usb
[    1.861151] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.861201] tg3.c:v3.137 (May 11, 2014)
[    1.861215] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    1.861400] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    1.882221] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[    1.888214] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.888468] ACPI: PCI Interrupt Link [LNND] enabled at IRQ 19
[    1.888588] e1000e 0000:07:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.888616] e1000e 0000:07:00.0: irq 40 for MSI/MSI-X
[    1.909946] ehci-pci: EHCI PCI platform driver
[    1.914497] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.914547] ehci-pci 0000:00:02.1: EHCI Host Controller
[    1.914554] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    1.914567] ehci-pci 0000:00:02.1: debug port 1
[    1.914603] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    1.914623] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc503000
[    1.924032] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    1.924092] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.924094] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.924095] usb usb1: Product: EHCI Host Controller
[    1.924096] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    1.924097] usb usb1: SerialNumber: 0000:00:02.1
[    1.924266] hub 1-0:1.0: USB hub found
[    1.924273] hub 1-0:1.0: 10 ports detected
[    1.986850] ohci-pci: OHCI PCI platform driver
[    1.991467] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    1.997047] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.002485] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d4:d3
[    2.002487] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.002489] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.002490] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.002553] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.002645] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.050347] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc500000
[    2.064830] e1000e 0000:07:00.0 eth1: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c9
[    2.072746] e1000e 0000:07:00.0 eth1: Intel(R) PRO/1000 Network Connection
[    2.075662] tg3 0000:03:00.0 eth2: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d5:e9
[    2.075663] tg3 0000:03:00.0 eth2: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.075665] tg3 0000:03:00.0 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.075666] tg3 0000:03:00.0 eth2: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.114177] e1000e 0000:07:00.0 eth1: MAC: 0, PHY: 4, PBA No: D72468-003
[    2.116163] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.116165] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.116166] usb usb2: Product: OHCI PCI host controller
[    2.116167] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.116168] usb usb2: SerialNumber: 0000:00:02.0
[    2.116338] hub 2-0:1.0: USB hub found
[    2.116347] hub 2-0:1.0: 10 ports detected
[    2.158843] ACPI: PCI Interrupt Link [LNIC] enabled at IRQ 18
[    2.164680] e1000e 0000:07:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.173998] e1000e 0000:07:00.1: irq 41 for MSI/MSI-X
[    2.344762] e1000e 0000:07:00.1 eth3: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c8
[    2.352668] e1000e 0000:07:00.1 eth3: Intel(R) PRO/1000 Network Connection
[    2.359616] e1000e 0000:07:00.1 eth3: MAC: 0, PHY: 4, PBA No: D72468-003
[    2.366393] e1000e 0000:08:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.375700] e1000e 0000:08:00.0: irq 42 for MSI/MSI-X
[    2.548706] e1000e 0000:08:00.0 eth4: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:cb
[    2.556621] e1000e 0000:08:00.0 eth4: Intel(R) PRO/1000 Network Connection
[    2.563570] e1000e 0000:08:00.0 eth4: MAC: 0, PHY: 4, PBA No: D72468-003
[    2.570350] e1000e 0000:08:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.579659] e1000e 0000:08:00.1: irq 43 for MSI/MSI-X
[    2.752707] e1000e 0000:08:00.1 eth5: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:ca
[    2.760616] e1000e 0000:08:00.1 eth5: Intel(R) PRO/1000 Network Connection
[    2.767565] e1000e 0000:08:00.1 eth5: MAC: 0, PHY: 4, PBA No: D72468-003
[    2.777802] FS-Cache: Loaded
[    2.783711] RPC: Registered named UNIX socket transport module.
[    2.790138] RPC: Registered udp transport module.
[    2.796236] RPC: Registered tcp transport module.
[    2.802314] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.812958] FS-Cache: Netfs 'nfs' registered for caching
[    2.824298] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.868085] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.518272] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.521509] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.521509] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.351291] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    5.364779] systemd[1]: Detected architecture 'x86-64'.
[    5.607696] systemd[1]: Inserted module 'autofs4'
[    5.613647] systemd[1]: Set hostname to <cb-test-tgt>.
[    5.695608] random: nonblocking pool is initialized
[    6.049518] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    6.062257] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    6.077502] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.085225] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.092798] systemd[1]: Expecting device dev-ttyS0.device...
[    6.108121] systemd[1]: Starting Remote File Systems (Pre).
[    6.124077] systemd[1]: Reached target Remote File Systems (Pre).
[    6.130205] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.152061] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.161491] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.169572] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.177496] systemd[1]: Starting Paths.
[    6.192053] systemd[1]: Reached target Paths.
[    6.196430] systemd[1]: Starting Encrypted Volumes.
[    6.212058] systemd[1]: Reached target Encrypted Volumes.
[    6.217474] systemd[1]: Starting Swap.
[    6.232051] systemd[1]: Reached target Swap.
[    6.236337] systemd[1]: Starting Root Slice.
[    6.248056] systemd[1]: Created slice Root Slice.
[    6.252779] systemd[1]: Starting User and Session Slice.
[    6.268052] systemd[1]: Created slice User and Session Slice.
[    6.273811] systemd[1]: Starting Delayed Shutdown Socket.
[    6.288059] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.293816] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.312059] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.319038] systemd[1]: Starting Journal Socket (/dev/log).
[    6.336053] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.341990] systemd[1]: Starting udev Kernel Socket.
[    6.356056] systemd[1]: Listening on udev Kernel Socket.
[    6.361403] systemd[1]: Starting udev Control Socket.
[    6.376051] systemd[1]: Listening on udev Control Socket.
[    6.381465] systemd[1]: Starting Journal Socket.
[    6.396042] systemd[1]: Listening on Journal Socket.
[    6.401030] systemd[1]: Starting System Slice.
[    6.416046] systemd[1]: Created slice System Slice.
[    6.420935] systemd[1]: Starting system-getty.slice.
[    6.436057] systemd[1]: Created slice system-getty.slice.
[    6.441468] systemd[1]: Starting system-serial\x2dgetty.slice.
[    6.456051] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    6.462351] systemd[1]: Starting Increase datagram queue length...
[    6.480645] systemd[1]: Mounting Huge Pages File System...
[    6.496570] systemd[1]: Starting udev Coldplug all Devices...
[    6.756576] systemd[1]: Starting Load Kernel Modules...
[    6.772892] systemd[1]: Mounting POSIX Message Queue File System...
[    6.795352] systemd[1]: Started Set Up Additional Binary Formats.
[    6.801707] systemd[1]: Mounting Debug File System...
[    6.817214] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.840592] systemd[1]: Starting Slices.
[    6.852065] systemd[1]: Reached target Slices.
[    6.856642] systemd[1]: Starting Remount Root and Kernel File Systems...
[    6.884081] systemd[1]: Mounted Debug File System.
[    6.900104] systemd[1]: Mounted POSIX Message Queue File System.
[    6.916065] systemd[1]: Mounted Huge Pages File System.
[    6.932044] systemd[1]: Started Increase datagram queue length.
[    6.948104] systemd[1]: Started Load Kernel Modules.
[    6.968081] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.988055] systemd[1]: Started Remount Root and Kernel File Systems.
[    7.004044] systemd[1]: Started udev Coldplug all Devices.
[    7.036027] systemd[1]: Started Various fixups to make systemd work better on Debian.
[    7.043880] systemd[1]: Starting Load/Save Random Seed...
[    7.060658] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.076506] systemd[1]: Mounted Configuration File System.
[    7.082022] systemd[1]: Starting Apply Kernel Variables...
[    7.096644] systemd[1]: Mounted FUSE Control File System.
[    7.102078] systemd[1]: Starting Syslog Socket.
[    7.116044] systemd[1]: Listening on Syslog Socket.
[    7.120937] systemd[1]: Starting Sockets.
[    7.132046] systemd[1]: Reached target Sockets.
[    7.136586] systemd[1]: Starting Journal Service...
[    7.160061] systemd[1]: Started Journal Service.
[    7.379668] systemd-udevd[154]: starting version 215
[    7.575448] systemd-journald[152]: Received request to flush runtime journal from PID 1
[    8.114862] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.134164] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    8.142887] ACPI: Power Button [PWRB]
[    8.146681] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    8.154241] ACPI: Power Button [PWRF]
[    8.204225] systemd-udevd[183]: renamed network interface eth1 to eth6
[    8.235700] SCSI subsystem initialized
[    8.252812] i2c i2c-0: nForce2 SMBus adapter at 0x4c80
[    8.258020] i2c i2c-1: nForce2 SMBus adapter at 0x4cc0
[    8.267874] FDC 0 is a post-1991 82077
[    8.287167] libata version 3.00 loaded.
[    8.297763] sata_nv 0000:00:07.0: version 3.5
[    8.297980] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    8.304189] scsi0 : sata_nv
[    8.307118] scsi1 : sata_nv
[    8.309970] ata1: SATA max UDMA/133 cmd 0x5050 ctl 0x5070 bmdma 0x5030 irq 21
[    8.317112] ata2: SATA max UDMA/133 cmd 0x5058 ctl 0x5074 bmdma 0x5038 irq 21
[    8.325121] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[    8.326165] EDAC MC: Ver: 3.0.0
[    8.336133] scsi2 : sata_nv
[    8.339104] scsi3 : sata_nv
[    8.342479] MCE: In-kernel MCE decoding enabled.
[    8.347459] ata3: SATA max UDMA/133 cmd 0x5060 ctl 0x5078 bmdma 0x5040 irq 20
[    8.354598] ata4: SATA max UDMA/133 cmd 0x5068 ctl 0x507c bmdma 0x5048 irq 20
[    8.362045] pata_amd 0000:00:06.0: version 0.4.1
[    8.363152] scsi4 : pata_amd
[    8.366286] scsi5 : pata_amd
[    8.369348] AMD64 EDAC driver v3.4.0
[    8.369791] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5020 irq 14
[    8.369793] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x5028 irq 15
[    8.369851] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[    8.369919] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
[    8.403506] EDAC amd64: DRAM ECC enabled.
[    8.407550] EDAC amd64: K8 revF or later detected (node 0).
[    8.413166] EDAC MC: DCT0 chip selects:
[    8.413168] EDAC amd64: MC: 0:     0MB 1:     0MB
[    8.417878] EDAC amd64: MC: 2:     0MB 3:     0MB
[    8.422649] EDAC amd64: MC: 4:  1024MB 5:  1024MB
[    8.427368] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[    8.432200] EDAC amd64: CS4: Registered DDR2 RAM
[    8.436840] EDAC amd64: CS5: Registered DDR2 RAM
[    8.441491] EDAC amd64: CS6: Registered DDR2 RAM
[    8.441575] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    8.452630] EDAC amd64: CS7: Registered DDR2 RAM
[    8.457595] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[    8.467112] EDAC amd64: DRAM ECC disabled.
[    8.471255] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
[    8.495861] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[    8.538708] kvm: Nested Virtualization enabled
[    8.551158] powernow_k8: fid 0x16 (3000 MHz), vid 0xa
[    8.556226] powernow_k8: fid 0x14 (2800 MHz), vid 0xc
[    8.561281] powernow_k8: fid 0x12 (2600 MHz), vid 0xe
[    8.566331] powernow_k8: fid 0x10 (2400 MHz), vid 0x10
[    8.571470] powernow_k8: fid 0xe (2200 MHz), vid 0x12
[    8.576522] powernow_k8: fid 0xc (2000 MHz), vid 0x12
[    8.581573] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[    8.586702] powernow_k8: fid 0x16 (3000 MHz), vid 0xa
[    8.591751] powernow_k8: fid 0x14 (2800 MHz), vid 0xc
[    8.596804] powernow_k8: fid 0x12 (2600 MHz), vid 0xe
[    8.601856] powernow_k8: fid 0x10 (2400 MHz), vid 0x10
[    8.606995] powernow_k8: fid 0xe (2200 MHz), vid 0x12
[    8.606996] powernow_k8: fid 0xc (2000 MHz), vid 0x12
[    8.606996] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[    8.608768] powernow_k8: Found 1 Dual-Core AMD Opteron(tm) Processor 8222 (4 cpu cores) (version 2.20.00)
[    8.632044] ata1: SATA link down (SStatus 0 SControl 300)
[    8.676021] ata3: SATA link down (SStatus 0 SControl 300)
[    8.944038] ata2: SATA link down (SStatus 0 SControl 300)
[    9.260042] ata4: SATA link down (SStatus 0 SControl 300)
[    9.727015] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   40.115550] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****