[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffa8fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dffa9000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9444-g818e928-dirty 04/22/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000160000000 aka 5632M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdffa9 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
[    0.000000]  [mem 0x15fe00000-0x15fffffff] page 2M
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
[    0.000000]  [mem 0x15c000000-0x15fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
[    0.000000]  [mem 0x140000000-0x15bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdffa8fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xdfdfffff] page 2M
[    0.000000]  [mem 0xdfe00000-0xdffa8fff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000DFFB20E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000DFFB48A0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000DFFB2250 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000DFFB2210 000040
[    0.000000] ACPI: SSDT 0x00000000DFFB49A0 000D57 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: APIC 0x00000000DFFB5700 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB57D0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB5948 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000DFFB5980 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB59C0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB5B38 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
[    0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[    0.000000]   NODE_DATA [mem 0x11fffb000-0x11fffffff]
[    0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
[    0.000000]   NODE_DATA [mem 0x15fff9000-0x15fffdfff]
[    0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
[    0.000000]  [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x15fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xdffa8fff]
[    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
[    0.000000]   node   1: [mem 0x120000000-0x15fffffff]
[    0.000000] On node 0 totalpages: 1048391
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12487 pages used for memmap
[    0.000000]   DMA32 zone: 913321 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdffa9000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
[    0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292595
[    0.000000] Policy zone: Normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xf5fa000000-0xf5fbffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
[    0.000000] Memory: 5015500K/5242140K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.812 MHz processor
[    0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.62 BogoMIPS (lpj=7639248)
[    0.010954] pid_max: default: 32768 minimum: 301
[    0.015676] ACPI: Core revision 20140424
[    0.022057] ACPI: All ACPI Tables successfully acquired
[    0.027583] Security Framework initialized
[    0.031763] AppArmor: AppArmor disabled by boot time parameter
[    0.037672] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.045485] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058733] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.068599] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.075629] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.083587] Initializing cgroup subsys memory
[    0.088045] Initializing cgroup subsys devices
[    0.092589] Initializing cgroup subsys freezer
[    0.097113] Initializing cgroup subsys net_cls
[    0.101658] Initializing cgroup subsys blkio
[    0.106012] Initializing cgroup subsys perf_event
[    0.110810] Initializing cgroup subsys net_prio
[    0.115476] tseg: 0000000000
[    0.115489] CPU: Physical Processor ID: 0
[    0.119609] CPU: Processor Core ID: 0
[    0.124413] mce: CPU supports 6 MCE banks
[    0.128557] LVT offset 0 assigned for vector 0xf9
[    0.133349] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.148837] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.157971] ftrace: allocating 21601 entries in 85 pages
[    0.173424] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.219067] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.336304] Performance Events: AMD PMU driver.
[    0.341014] ... version:                0
[    0.345095] ... bit width:              48
[    0.349270] ... generic registers:      4
[    0.353359] ... value mask:             0000ffffffffffff
[    0.358745] ... max period:             00007fffffffffff
[    0.364112] ... fixed-purpose events:   0
[    0.368202] ... event mask:             000000000000000f
[    0.376182] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.384496] x86: Booting SMP configuration:
[    0.388785] .... node  #0, CPUs:      #1 #2 #3
[    0.433346] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.585057] x86: Booted up 2 nodes, 8 CPUs
[    0.589483] smpboot: Total of 8 processors activated (30557.71 BogoMIPS)
[    0.602144] devtmpfs: initialized
[    0.614147] pinctrl core: initialized pinctrl subsystem
[    0.619626] NET: Registered protocol family 16
[    0.624365] cpuidle: using governor ladder
[    0.628530] cpuidle: using governor menu
[    0.632536] node 0 link 1: io port [1000, 3fff]
[    0.632539] TOM: 00000000e0000000 aka 3584M
[    0.636803] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.636807] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.636810] node 0 link 1: mmio [f8000000, fbffffff]
[    0.636813] TOM2: 0000000160000000 aka 5632M
[    0.641150] bus: [bus 00-05] on node 0 link 1
[    0.641152] bus: 00 [io  0x0000-0xffff]
[    0.641154] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.641156] bus: 00 [mem 0x160000000-0xfcffffffff]
[    0.641262] ACPI: bus type PCI registered
[    0.645348] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.652021] PCI: Using configuration type 1 for base access
[    0.657666] PCI: Using configuration type 1 for extended access
[    0.664283] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.670654] mtrr: probably your BIOS does not setup all CPUs.
[    0.676476] mtrr: corrected configuration.
[    0.693181] ACPI: Added _OSI(Module Device)
[    0.697483] ACPI: Added _OSI(Processor Device)
[    0.702005] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.706790] ACPI: Added _OSI(Processor Aggregator Device)
[    0.715701] ACPI: Interpreter enabled
[    0.719448] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.728915] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.738364] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.747818] ACPI: (supports S0 S1 S5)
[    0.751551] ACPI: Using IOAPIC for interrupt routing
[    0.756635] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.785140] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.791401] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.799714] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.837565] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.847700] PCI host bridge to bus 0000:00
[    0.851871] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.857429] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.863691] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.870644] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.877598] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.883866] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.884063] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.884070] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.884193] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.884201] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.884226] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.884234] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.884276] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.884377] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.884391] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.884420] pci 0000:00:02.0: supports D1 D2
[    0.884449] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.884513] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.890325] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.890338] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.890379] pci 0000:00:02.1: supports D1 D2
[    0.890398] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.890470] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.896282] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.896308] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.896337] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.903569] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.910181] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.917414] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.924120] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.924132] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.924137] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.924141] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.924146] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.924150] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.924155] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.924268] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.924278] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.924283] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.924287] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.924292] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.924296] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.924301] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.924462] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.924581] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.930377] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.930426] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.930475] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.936275] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.936330] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.936386] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.942205] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.942257] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.942305] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.948107] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.948157] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.948211] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.954033] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.954182] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.954290] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.954404] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.954542] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.954700] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.954828] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.954974] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.955098] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.955242] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.955424] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.955443] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.955454] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.955460] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.955508] pci 0000:01:04.0: supports D1 D2
[    0.955621] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.960688] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.960691] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.960694] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.960781] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.960821] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.960864] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
[    0.960950] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.961042] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.971163] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.976205] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.976315] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.976349] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.976456] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.976557] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.986678] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.991730] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.991810] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.996927] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.002006] pci_bus 0000:00: on NUMA node 0
[    1.002112] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    1.008546] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    1.014968] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.022632] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.030287] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.037954] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.045616] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.052033] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.058476] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.066134] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.073798] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.081442] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.087866] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.094294] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.101954] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.109604] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.117267] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.126359] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.133097] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.139811] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.146525] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.153497] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.158750] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.164532] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.172721] vgaarb: loaded
[    1.175523] vgaarb: bridge control possible 0000:01:04.0
[    1.181105] PCI: Using ACPI for IRQ routing
[    1.185382] PCI: pci_cache_line_size set to 64 bytes
[    1.185439] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.185443] e820: reserve RAM buffer [mem 0xdffa9000-0xdfffffff]
[    1.185757] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.192883] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.198152] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.206887] Switched to clocksource hpet
[    1.222402] pnp: PnP ACPI init
[    1.225619] ACPI: bus type PNP registered
[    1.230255] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.230335] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.230432] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.230512] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.230553] pnp 00:04: [dma 2]
[    1.230595] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.230617] pnp: PnP ACPI: found 5 devices
[    1.234815] ACPI: bus type PNP unregistered
[    1.246893] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
[    1.256960] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.262005] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.268189] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.275063] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.282399] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.289747] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.294795] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.301664] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.306706] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.313575] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.318632] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.323675] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.323678] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
[    1.323681] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
[    1.323684] pci_bus 0000:00: resource 7 [io  0x0000-0x0cf7]
[    1.323686] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.323689] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.323692] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.323694] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.323697] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.323833] NET: Registered protocol family 2
[    1.328772] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.336541] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.343956] TCP: Hash tables configured (established 65536 bind 65536)
[    1.350634] TCP: reno registered
[    1.353955] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.360229] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.367102] NET: Registered protocol family 1
[    1.371953] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.378142] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.384129] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.389752] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.395343] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.401001] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.406628] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.412212] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.417869] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.423465] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.429052] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.434711] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.440312] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.445902] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.451563] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.457157] pci 0000:01:04.0: Video device with shadowed ROM
[    1.457166] PCI: CLS 64 bytes, default 64
[    1.457274] Unpacking initramfs...
[    1.690157] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.698153] PCI-DMA: Disabling AGP.
[    1.703355] PCI-DMA: aperture base @ d4000000 size 65536 KB
[    1.709026] PCI-DMA: using GART IOMMU.
[    1.712865] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.724980] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.733324] microcode: CPU0: patch_level=0x01000096
[    1.738326] microcode: CPU1: patch_level=0x01000096
[    1.743345] microcode: CPU2: patch_level=0x01000096
[    1.748355] microcode: CPU3: patch_level=0x01000096
[    1.753363] microcode: CPU4: patch_level=0x01000096
[    1.758364] microcode: CPU5: patch_level=0x01000096
[    1.763355] microcode: CPU6: patch_level=0x01000096
[    1.769444] microcode: CPU7: patch_level=0x01000096
[    1.774535] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.783476] LVT offset 1 assigned for vector 0x400
[    1.788384] IBS: LVT offset 1 assigned
[    1.792266] perf: AMD IBS detected (0x00000007)
[    1.797491] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.803981] audit: initializing netlink subsys (disabled)
[    1.809501] audit: type=2000 audit(1429713484.620:1): initialized
[    1.816411] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.822917] zbud: loaded
[    1.825878] VFS: Disk quotas dquot_6.5.2
[    1.829926] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.836581] msgmni has been set to 9941
[    1.841042] alg: No test for stdrng (krng)
[    1.845322] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.852969] io scheduler noop registered
[    1.856989] io scheduler deadline registered
[    1.861444] io scheduler cfq registered (default)
[    1.866445] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.866572] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.866691] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.866816] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.866965] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.866993] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.867019] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.867044] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.867064] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.874150] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.880767] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.880777] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.887828] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.894444] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.894455] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.901499] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.901510] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.908551] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.908580] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.914256] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.921086] GHES: HEST is not enabled!
[    1.925054] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.951847] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.979623] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.987665] Linux agpgart interface v0.103
[    1.992084] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.002548] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.007713] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.013071] mousedev: PS/2 mouse device common for all mice
[    2.018859] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.024051] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.030549] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.038537] ledtrig-cpu: registered to indicate activity on CPUs
[    2.044802] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.051324] AMD IOMMUv2 functionality not available on this system
[    2.057730] TCP: cubic registered
[    2.061278] NET: Registered protocol family 10
[    2.066234] mip6: Mobile IPv6
[    2.067712] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.078023] NET: Registered protocol family 17
[    2.082569] mpls_gso: MPLS GSO support
[    2.087251] registered taskstats version 1
[    2.092180] rtc_cmos rtc_cmos: setting system clock to 2015-04-22 14:38:06 UTC (1429713486)
[    2.100760] PM: Hibernation image not present or could not be loaded.
[    2.102606] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.110625] Write protecting the kernel read-only data: 8192k
[    2.119915] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.128661] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.148815] systemd-udevd[98]: starting version 215
[    2.154343] random: systemd-udevd urandom read with 3 bits of entropy available
[    2.177362] pps_core: LinuxPPS API ver. 1 registered
[    2.177494] ACPI: bus type USB registered
[    2.177549] usbcore: registered new interface driver usbfs
[    2.177569] usbcore: registered new interface driver hub
[    2.177672] usbcore: registered new device driver usb
[    2.202592] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.212715] PTP clock support registered
[    2.217048] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.224121] tg3.c:v3.137 (May 11, 2014)
[    2.228110] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.234059] ehci-pci: EHCI PCI platform driver
[    2.234139] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.244677] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.244745] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.244763] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.244781] ehci-pci 0000:00:02.1: debug port 1
[    2.244825] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.244855] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.254577] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.254642] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.254644] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.254645] usb usb1: Product: EHCI Host Controller
[    2.254647] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.254648] usb usb1: SerialNumber: 0000:00:02.1
[    2.254993] hub 1-0:1.0: USB hub found
[    2.255004] hub 1-0:1.0: 10 ports detected
[    2.318712] ohci-pci: OHCI PCI platform driver
[    2.323490] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.329180] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.336738] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.373855] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.384239] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.394096] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.402075] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.404307] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.404310] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.404312] usb usb2: Product: OHCI PCI host controller
[    2.404313] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.404315] usb usb2: SerialNumber: 0000:00:02.0
[    2.404626] hub 2-0:1.0: USB hub found
[    2.404661] hub 2-0:1.0: 10 ports detected
[    2.447345] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.453235] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.510854] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.521254] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.531114] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.539077] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.552526] FS-Cache: Loaded
[    2.559723] RPC: Registered named UNIX socket transport module.
[    2.566349] RPC: Registered udp transport module.
[    2.572407] RPC: Registered tcp transport module.
[    2.578507] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.591167] FS-Cache: Netfs 'nfs' registered for caching
[    2.604848] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.650524] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.722382] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[    3.726131] Switched to clocksource tsc
[    4.222065] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.228731] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.235726] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.731607] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    6.745758] systemd[1]: Detected architecture 'x86-64'.
[    6.989125] random: nonblocking pool is initialized
[    7.026015] systemd[1]: Inserted module 'autofs4'
[    7.032619] systemd[1]: Set hostname to <cb-test-tgt>.
[    7.874706] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    7.887605] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    7.903002] systemd[1]: Expecting device dev-ttyS0.device...
[    7.916748] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    7.924745] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.932463] systemd[1]: Starting Remote File Systems (Pre).
[    7.948696] systemd[1]: Reached target Remote File Systems (Pre).
[    7.955072] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    7.976618] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.986206] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    7.994410] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    8.002458] systemd[1]: Starting Paths.
[    8.016665] systemd[1]: Reached target Paths.
[    8.021216] systemd[1]: Starting Encrypted Volumes.
[    8.036573] systemd[1]: Reached target Encrypted Volumes.
[    8.042099] systemd[1]: Starting Swap.
[    8.056581] systemd[1]: Reached target Swap.
[    8.061023] systemd[1]: Starting Root Slice.
[    8.080577] systemd[1]: Created slice Root Slice.
[    8.085461] systemd[1]: Starting User and Session Slice.
[    8.100592] systemd[1]: Created slice User and Session Slice.
[    8.106499] systemd[1]: Starting Delayed Shutdown Socket.
[    8.120561] systemd[1]: Listening on Delayed Shutdown Socket.
[    8.126466] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    8.144580] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.151683] systemd[1]: Starting Journal Socket (/dev/log).
[    8.168544] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.174587] systemd[1]: Starting Syslog Socket.
[    8.188545] systemd[1]: Listening on Syslog Socket.
[    8.194638] systemd[1]: Starting udev Kernel Socket.
[    8.208532] systemd[1]: Listening on udev Kernel Socket.
[    8.213971] systemd[1]: Starting udev Control Socket.
[    8.228535] systemd[1]: Listening on udev Control Socket.
[    8.234071] systemd[1]: Starting Journal Socket.
[    8.248513] systemd[1]: Listening on Journal Socket.
[    8.253630] systemd[1]: Starting Sockets.
[    8.268501] systemd[1]: Reached target Sockets.
[    8.273220] systemd[1]: Starting System Slice.
[    8.288497] systemd[1]: Created slice System Slice.
[    8.293515] systemd[1]: Starting system-getty.slice.
[    8.308503] systemd[1]: Created slice system-getty.slice.
[    8.314027] systemd[1]: Starting system-serial\x2dgetty.slice.
[    8.332511] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    8.340339] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.366158] systemd[1]: Mounting Debug File System...
[    8.612507] systemd[1]: Started Set Up Additional Binary Formats.
[    8.618850] systemd[1]: Mounting Huge Pages File System...
[    8.923388] systemd[1]: Starting Load Kernel Modules...
[    8.941721] systemd[1]: Mounting POSIX Message Queue File System...
[    8.961757] systemd[1]: Starting udev Coldplug all Devices...
[    8.977569] systemd[1]: Starting Journal Service...
[    9.004370] systemd[1]: Started Journal Service.
[    9.943129] systemd-udevd[184]: starting version 215
[   10.375590] systemd-journald[166]: Received request to flush runtime journal from PID 1
[   11.439407] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[   11.447680] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[   11.456538] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[   11.465081] ACPI: Power Button [PWRB]
[   11.469062] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   11.469197] EDAC MC: Ver: 3.0.0
[   11.479828] ACPI: Power Button [PWRF]
[   11.503359] FDC 0 is a post-1991 82077
[   11.631428] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
[   11.638573] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[   11.722048] SCSI subsystem initialized
[   11.728947] MCE: In-kernel MCE decoding enabled.
[   11.740024] acpi-cpufreq: overriding BIOS provided _PSD data
[   11.799891] libata version 3.00 loaded.
[   11.806381] AMD64 EDAC driver v3.4.0
[   11.810621] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   12.513839] kvm: Nested Virtualization enabled
[   12.518447] kvm: Nested Paging enabled
[   14.882192] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[   14.887667] EDAC amd64: DRAM ECC enabled.
[   14.887691] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.898651] EDAC amd64: F10h detected (node 0).
[   14.903384] EDAC MC: DCT0 chip selects:
[   14.903388] EDAC amd64: MC: 0:     0MB 1:     0MB
[   14.908210] EDAC amd64: MC: 2:     0MB 3:     0MB
[   14.913016] EDAC amd64: MC: 4:     0MB 5:     0MB
[   14.917809] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   14.922605] EDAC MC: DCT1 chip selects:
[   14.922609] EDAC amd64: MC: 0:     0MB 1:     0MB
[   14.927409] EDAC amd64: MC: 2:     0MB 3:     0MB
[   14.932205] EDAC amd64: MC: 4:     0MB 5:     0MB
[   14.936996] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   14.941782] EDAC amd64: using x4 syndromes.
[   14.946051] EDAC amd64: MCT channel count: 2
[   14.950493] EDAC amd64: CS6: Registered DDR2 RAM
[   14.955251] EDAC amd64: CS7: Registered DDR2 RAM
[   14.960330] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[   14.970241] EDAC amd64: DRAM ECC enabled.
[   14.974419] EDAC amd64: F10h detected (node 1).
[   14.979092] EDAC MC: DCT0 chip selects:
[   14.979096] EDAC amd64: MC: 0:  1024MB 1:     0MB
[   14.983901] EDAC amd64: MC: 2:     0MB 3:     0MB
[   14.988689] EDAC amd64: MC: 4:     0MB 5:     0MB
[   14.993463] EDAC amd64: MC: 6:     0MB 7:     0MB
[   14.998275] EDAC MC: DCT1 chip selects:
[   14.998278] EDAC amd64: MC: 0:     0MB 1:     0MB
[   15.003067] EDAC amd64: MC: 2:     0MB 3:     0MB
[   15.007875] EDAC amd64: MC: 4:     0MB 5:     0MB
[   15.012681] EDAC amd64: MC: 6:     0MB 7:     0MB
[   15.017451] EDAC amd64: using x4 syndromes.
[   15.021710] EDAC amd64: MCT channel count: 1
[   15.026122] EDAC amd64: CS0: Registered DDR2 RAM
[   15.030909] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[   15.042082] pata_amd 0000:00:06.0: version 0.4.1
[   15.042941] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   15.054272] scsi0 : pata_amd
[   15.057729] scsi1 : pata_amd
[   15.060868] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[   15.067982] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[   15.075186] sata_nv 0000:00:07.0: version 3.5
[   15.075519] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[   15.083245] scsi2 : sata_nv
[   15.086971] scsi3 : sata_nv
[   15.090520] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[   15.097773] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[   15.105249] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[   15.111574] scsi4 : sata_nv
[   15.115740] scsi5 : sata_nv
[   15.119810] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[   15.127212] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[   15.413999] ata3: SATA link down (SStatus 0 SControl 300)
[   15.449988] ata5: SATA link down (SStatus 0 SControl 300)
[   15.729907] ata4: SATA link down (SStatus 0 SControl 300)
[   16.045763] ata6: SATA link down (SStatus 0 SControl 300)
[   45.850907] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****