[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffa8fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dffa9000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-8857-g23d1232-dirty 04/05/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000160000000 aka 5632M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdffa9 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
[    0.000000]  [mem 0x15fe00000-0x15fffffff] page 2M
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
[    0.000000]  [mem 0x15c000000-0x15fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
[    0.000000]  [mem 0x140000000-0x15bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdffa8fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xdfdfffff] page 2M
[    0.000000]  [mem 0xdfe00000-0xdffa8fff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000DFFB20E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000DFFB48A0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000DFFB2250 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000DFFB2210 000040
[    0.000000] ACPI: SSDT 0x00000000DFFB49A0 000D57 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: APIC 0x00000000DFFB5700 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB57D0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB5948 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000DFFB5980 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB59C0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB5B38 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
[    0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[    0.000000]   NODE_DATA [mem 0x11fffb000-0x11fffffff]
[    0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
[    0.000000]   NODE_DATA [mem 0x15fff9000-0x15fffdfff]
[    0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
[    0.000000]  [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x15fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xdffa8fff]
[    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
[    0.000000]   node   1: [mem 0x120000000-0x15fffffff]
[    0.000000] On node 0 totalpages: 1048391
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12487 pages used for memmap
[    0.000000]   DMA32 zone: 913321 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdffa9000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
[    0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292595
[    0.000000] Policy zone: Normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xe5ea000000-0xe5ebffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
[    0.000000] Memory: 5015500K/5242140K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.850 MHz processor
[    0.000160] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.70 BogoMIPS (lpj=7639400)
[    0.010954] pid_max: default: 32768 minimum: 301
[    0.015675] ACPI: Core revision 20140424
[    0.022057] ACPI: All ACPI Tables successfully acquired
[    0.027567] Security Framework initialized
[    0.031745] AppArmor: AppArmor disabled by boot time parameter
[    0.037655] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.045475] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058804] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.068695] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.075723] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.083687] Initializing cgroup subsys memory
[    0.088171] Initializing cgroup subsys devices
[    0.092718] Initializing cgroup subsys freezer
[    0.097251] Initializing cgroup subsys net_cls
[    0.101785] Initializing cgroup subsys blkio
[    0.106142] Initializing cgroup subsys perf_event
[    0.110946] Initializing cgroup subsys net_prio
[    0.115605] tseg: 0000000000
[    0.115619] CPU: Physical Processor ID: 0
[    0.119738] CPU: Processor Core ID: 0
[    0.124539] mce: CPU supports 6 MCE banks
[    0.128652] LVT offset 0 assigned for vector 0xf9
[    0.133444] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.148923] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.158060] ftrace: allocating 21601 entries in 85 pages
[    0.173562] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.219210] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.336302] Performance Events: AMD PMU driver.
[    0.341013] ... version:                0
[    0.345115] ... bit width:              48
[    0.349278] ... generic registers:      4
[    0.353394] ... value mask:             0000ffffffffffff
[    0.358794] ... max period:             00007fffffffffff
[    0.364173] ... fixed-purpose events:   0
[    0.368276] ... event mask:             000000000000000f
[    0.376290] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.384602] x86: Booting SMP configuration:
[    0.388873] .... node  #0, CPUs:      #1 #2 #3
[    0.433434] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.585081] x86: Booted up 2 nodes, 8 CPUs
[    0.589508] smpboot: Total of 8 processors activated (30558.01 BogoMIPS)
[    0.602150] devtmpfs: initialized
[    0.614148] pinctrl core: initialized pinctrl subsystem
[    0.619617] NET: Registered protocol family 16
[    0.624365] cpuidle: using governor ladder
[    0.628546] cpuidle: using governor menu
[    0.632554] node 0 link 1: io port [1000, 3fff]
[    0.632557] TOM: 00000000e0000000 aka 3584M
[    0.636814] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.636818] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.636821] node 0 link 1: mmio [f8000000, fbffffff]
[    0.636824] TOM2: 0000000160000000 aka 5632M
[    0.641171] bus: [bus 00-05] on node 0 link 1
[    0.641173] bus: 00 [io  0x0000-0xffff]
[    0.641175] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.641176] bus: 00 [mem 0x160000000-0xfcffffffff]
[    0.641282] ACPI: bus type PCI registered
[    0.645364] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.652038] PCI: Using configuration type 1 for base access
[    0.657685] PCI: Using configuration type 1 for extended access
[    0.664299] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.670652] mtrr: probably your BIOS does not setup all CPUs.
[    0.676476] mtrr: corrected configuration.
[    0.693199] ACPI: Added _OSI(Module Device)
[    0.697510] ACPI: Added _OSI(Processor Device)
[    0.702030] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.706814] ACPI: Added _OSI(Processor Aggregator Device)
[    0.715714] ACPI: Interpreter enabled
[    0.719455] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.728913] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.738362] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.747808] ACPI: (supports S0 S1 S5)
[    0.751541] ACPI: Using IOAPIC for interrupt routing
[    0.756626] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.785652] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.791913] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.800227] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.839041] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.849159] PCI host bridge to bus 0000:00
[    0.853326] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.858884] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.865141] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.872090] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.879037] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.885304] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.885501] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.885509] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.885640] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.885651] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.885676] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.885684] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.885706] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.885808] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.885824] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.885860] pci 0000:00:02.0: supports D1 D2
[    0.885879] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.885943] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.891758] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.891771] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.891813] pci 0000:00:02.1: supports D1 D2
[    0.891832] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.891922] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.897738] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.897764] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.897788] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.905006] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.911615] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.918843] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.925558] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.925570] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.925575] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.925579] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.925584] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.925588] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.925593] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.925746] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.925762] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.925771] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.925786] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.925791] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.925804] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.925820] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.926050] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.926147] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.931968] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.932017] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.932063] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.937878] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.937933] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.937989] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.943805] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.943854] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.943905] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.949704] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.949753] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.949810] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.955635] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.955798] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.955907] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.956027] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.956138] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.956238] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.956366] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.956515] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.956645] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.956787] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.956976] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.956991] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.957000] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.957007] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.957045] pci 0000:01:04.0: supports D1 D2
[    0.957164] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.962231] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.962234] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.962237] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.962360] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.962400] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.962436] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
[    0.962523] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.962645] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.972766] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.977806] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.977913] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.977945] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.978055] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.978156] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.988281] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.993337] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.993421] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.998543] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.003634] pci_bus 0000:00: on NUMA node 0
[    1.003736] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    1.010144] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    1.016556] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.024218] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.031882] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.039542] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.047220] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.053663] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.060087] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.067736] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.075394] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.083054] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.089465] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.095892] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.103540] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.111201] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.118866] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.127998] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.134707] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.141417] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.148122] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.155110] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.160355] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.166141] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.174332] vgaarb: loaded
[    1.177134] vgaarb: bridge control possible 0000:01:04.0
[    1.182696] PCI: Using ACPI for IRQ routing
[    1.186980] PCI: pci_cache_line_size set to 64 bytes
[    1.187037] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.187041] e820: reserve RAM buffer [mem 0xdffa9000-0xdfffffff]
[    1.187358] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.194495] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.199780] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.208520] Switched to clocksource hpet
[    1.224082] pnp: PnP ACPI init
[    1.227300] ACPI: bus type PNP registered
[    1.231934] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.232014] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.232113] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.232193] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.232233] pnp 00:04: [dma 2]
[    1.232275] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.232298] pnp: PnP ACPI: found 5 devices
[    1.236493] ACPI: bus type PNP unregistered
[    1.248585] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
[    1.258649] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.263702] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.269881] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.276753] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.284087] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.291435] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.296489] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.303361] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.308406] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.315282] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.320330] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.325371] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.325374] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
[    1.325377] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
[    1.325380] pci_bus 0000:00: resource 7 [io  0x0000-0x0cf7]
[    1.325383] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.325385] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.325388] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.325391] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.325394] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.325529] NET: Registered protocol family 2
[    1.330463] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.338250] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.345671] TCP: Hash tables configured (established 65536 bind 65536)
[    1.352362] TCP: reno registered
[    1.355678] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.361953] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.368810] NET: Registered protocol family 1
[    1.373646] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.379850] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.385840] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.391449] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.397041] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.402690] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.408304] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.413903] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.419559] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.425154] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.430743] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.436392] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.441990] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.447586] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.453233] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.458830] pci 0000:01:04.0: Video device with shadowed ROM
[    1.458838] PCI: CLS 64 bytes, default 64
[    1.458946] Unpacking initramfs...
[    1.691935] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.699906] PCI-DMA: Disabling AGP.
[    1.705127] PCI-DMA: aperture base @ d4000000 size 65536 KB
[    1.710794] PCI-DMA: using GART IOMMU.
[    1.714625] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.726725] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.735075] microcode: CPU0: patch_level=0x01000096
[    1.740076] microcode: CPU1: patch_level=0x01000096
[    1.745091] microcode: CPU2: patch_level=0x01000096
[    1.750097] microcode: CPU3: patch_level=0x01000096
[    1.755108] microcode: CPU4: patch_level=0x01000096
[    1.760101] microcode: CPU5: patch_level=0x01000096
[    1.765098] microcode: CPU6: patch_level=0x01000096
[    1.771201] microcode: CPU7: patch_level=0x01000096
[    1.776288] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.785240] LVT offset 1 assigned for vector 0x400
[    1.790132] IBS: LVT offset 1 assigned
[    1.794008] perf: AMD IBS detected (0x00000007)
[    1.799229] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.805707] audit: initializing netlink subsys (disabled)
[    1.811214] audit: type=2000 audit(1428200089.628:1): initialized
[    1.818118] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.824621] zbud: loaded
[    1.827591] VFS: Disk quotas dquot_6.5.2
[    1.831654] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.838300] msgmni has been set to 9941
[    1.842766] alg: No test for stdrng (krng)
[    1.847059] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.854708] io scheduler noop registered
[    1.858731] io scheduler deadline registered
[    1.863183] io scheduler cfq registered (default)
[    1.868187] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.868320] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.868445] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.868566] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.868715] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.868743] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.868769] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.868794] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.868814] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.875905] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.882525] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.882536] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.889578] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.896187] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.896198] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.903241] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.903253] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.910293] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.910322] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.916015] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.922847] GHES: HEST is not enabled!
[    1.926811] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.953581] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.981396] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.989444] Linux agpgart interface v0.103
[    1.993847] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.004469] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.009567] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.014903] mousedev: PS/2 mouse device common for all mice
[    2.020693] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.025897] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.032399] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.040379] ledtrig-cpu: registered to indicate activity on CPUs
[    2.046634] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.053151] AMD IOMMUv2 functionality not available on this system
[    2.059549] TCP: cubic registered
[    2.063093] NET: Registered protocol family 10
[    2.068063] mip6: Mobile IPv6
[    2.071148] NET: Registered protocol family 17
[    2.075718] mpls_gso: MPLS GSO support
[    2.075746] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.089159] registered taskstats version 1
[    2.094080] rtc_cmos rtc_cmos: setting system clock to 2015-04-05 02:14:51 UTC (1428200091)
[    2.102672] PM: Hibernation image not present or could not be loaded.
[    2.104488] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.112478] Write protecting the kernel read-only data: 8192k
[    2.121805] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.130542] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.150676] systemd-udevd[99]: starting version 215
[    2.156239] random: systemd-udevd urandom read with 4 bits of entropy available
[    2.179481] pps_core: LinuxPPS API ver. 1 registered
[    2.179605] ACPI: bus type USB registered
[    2.179663] usbcore: registered new interface driver usbfs
[    2.179686] usbcore: registered new interface driver hub
[    2.179793] usbcore: registered new device driver usb
[    2.204720] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.214621] PTP clock support registered
[    2.218930] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.225951] tg3.c:v3.137 (May 11, 2014)
[    2.229935] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.235856] ehci-pci: EHCI PCI platform driver
[    2.235952] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.246474] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.251861] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.259435] ehci-pci 0000:00:02.1: debug port 1
[    2.259558] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.270410] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.270446] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.288187] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.294115] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.300991] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.308366] usb usb1: Product: EHCI Host Controller
[    2.313338] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.319519] usb usb1: SerialNumber: 0000:00:02.1
[    2.324506] hub 1-0:1.0: USB hub found
[    2.328372] hub 1-0:1.0: 10 ports detected
[    2.333585] ohci-pci: OHCI PCI platform driver
[    2.335496] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.335499] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.335501] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.335503] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.335645] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.335850] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.384774] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.390485] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.398055] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.432520] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.442918] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.452788] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.460759] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.469683] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.476594] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.483944] usb usb2: Product: OHCI PCI host controller
[    2.489268] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.495451] usb usb2: SerialNumber: 0000:00:02.0
[    2.500370] hub 2-0:1.0: USB hub found
[    2.504223] hub 2-0:1.0: 10 ports detected
[    2.513952] FS-Cache: Loaded
[    2.521209] RPC: Registered named UNIX socket transport module.
[    2.527833] RPC: Registered udp transport module.
[    2.533890] RPC: Registered tcp transport module.
[    2.539966] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.552450] FS-Cache: Netfs 'nfs' registered for caching
[    2.567138] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.612156] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.724019] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[    3.727755] Switched to clocksource tsc
[    4.184382] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.191079] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.198077] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.494730] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    5.508899] systemd[1]: Detected architecture 'x86-64'.
[    5.727834] systemd[1]: Inserted module 'autofs4'
[    5.734455] systemd[1]: Set hostname to <cb-test-tgt>.
[    5.753306] random: nonblocking pool is initialized
[    6.059986] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    6.072886] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    6.088269] systemd[1]: Expecting device dev-ttyS0.device...
[    6.102903] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.110764] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.118460] systemd[1]: Starting Remote File Systems (Pre).
[    6.134960] systemd[1]: Reached target Remote File Systems (Pre).
[    6.141321] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.162953] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.172619] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.180861] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.188922] systemd[1]: Starting Paths.
[    6.202852] systemd[1]: Reached target Paths.
[    6.207331] systemd[1]: Starting Encrypted Volumes.
[    6.222854] systemd[1]: Reached target Encrypted Volumes.
[    6.228398] systemd[1]: Starting Swap.
[    6.242830] systemd[1]: Reached target Swap.
[    6.247224] systemd[1]: Starting Root Slice.
[    6.270861] systemd[1]: Created slice Root Slice.
[    6.275735] systemd[1]: Starting User and Session Slice.
[    6.290850] systemd[1]: Created slice User and Session Slice.
[    6.296770] systemd[1]: Starting Delayed Shutdown Socket.
[    6.310831] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.316753] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.334795] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.341871] systemd[1]: Starting Journal Socket (/dev/log).
[    6.358793] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.364853] systemd[1]: Starting Syslog Socket.
[    6.378793] systemd[1]: Listening on Syslog Socket.
[    6.384873] systemd[1]: Starting udev Kernel Socket.
[    6.398782] systemd[1]: Listening on udev Kernel Socket.
[    6.404245] systemd[1]: Starting udev Control Socket.
[    6.418786] systemd[1]: Listening on udev Control Socket.
[    6.424340] systemd[1]: Starting Journal Socket.
[    6.438765] systemd[1]: Listening on Journal Socket.
[    6.443900] systemd[1]: Starting Sockets.
[    6.458760] systemd[1]: Reached target Sockets.
[    6.463448] systemd[1]: Starting System Slice.
[    6.478752] systemd[1]: Created slice System Slice.
[    6.483753] systemd[1]: Starting system-getty.slice.
[    6.498750] systemd[1]: Created slice system-getty.slice.
[    6.504308] systemd[1]: Starting system-serial\x2dgetty.slice.
[    6.522738] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    6.529648] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.552299] systemd[1]: Mounting Debug File System...
[    6.588149] systemd[1]: Started Set Up Additional Binary Formats.
[    6.594506] systemd[1]: Mounting Huge Pages File System...
[    6.650215] systemd[1]: Starting Load Kernel Modules...
[    6.664744] systemd[1]: Mounting POSIX Message Queue File System...
[    6.684359] systemd[1]: Starting udev Coldplug all Devices...
[    6.700447] systemd[1]: Starting Journal Service...
[    6.726759] systemd[1]: Started Journal Service.
[    7.181222] systemd-udevd[187]: starting version 215
[    7.465907] systemd-journald[168]: Received request to flush runtime journal from PID 1
[    8.126590] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    8.134640] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[    8.167930] SCSI subsystem initialized
[    8.314164] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
[    8.321259] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[    8.439194] EDAC MC: Ver: 3.0.0
[    8.472611] libata version 3.00 loaded.
[    8.473076] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    8.481596] ACPI: Power Button [PWRB]
[    8.485572] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    8.493176] ACPI: Power Button [PWRF]
[    8.497269] MCE: In-kernel MCE decoding enabled.
[    8.502014] FDC 0 is a post-1991 82077
[    8.507286] acpi-cpufreq: overriding BIOS provided _PSD data
[    8.507380] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    8.526700] AMD64 EDAC driver v3.4.0
[    8.634749] kvm: Nested Virtualization enabled
[    8.639285] kvm: Nested Paging enabled
[   11.560973] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[   11.566475] sata_nv 0000:00:07.0: version 3.5
[   11.566525] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.566895] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[   11.569159] scsi0 : sata_nv
[   11.582557] scsi1 : sata_nv
[   11.585593] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[   11.592838] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[   11.600379] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[   11.606704] scsi2 : sata_nv
[   11.609820] scsi3 : sata_nv
[   11.612783] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[   11.619994] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[   11.627374] pata_amd 0000:00:06.0: version 0.4.1
[   11.628171] scsi4 : pata_amd
[   11.631424] scsi5 : pata_amd
[   11.634658] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[   11.641783] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[   11.648987] EDAC amd64: DRAM ECC enabled.
[   11.653121] EDAC amd64: F10h detected (node 0).
[   11.657823] EDAC MC: DCT0 chip selects:
[   11.657825] EDAC amd64: MC: 0:     0MB 1:     0MB
[   11.662657] EDAC amd64: MC: 2:     0MB 3:     0MB
[   11.667450] EDAC amd64: MC: 4:     0MB 5:     0MB
[   11.672243] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   11.677033] EDAC MC: DCT1 chip selects:
[   11.677035] EDAC amd64: MC: 0:     0MB 1:     0MB
[   11.681834] EDAC amd64: MC: 2:     0MB 3:     0MB
[   11.686633] EDAC amd64: MC: 4:     0MB 5:     0MB
[   11.691433] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   11.696235] EDAC amd64: using x4 syndromes.
[   11.700537] EDAC amd64: MCT channel count: 2
[   11.704935] EDAC amd64: CS6: Registered DDR2 RAM
[   11.709645] EDAC amd64: CS7: Registered DDR2 RAM
[   11.714624] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[   11.724516] EDAC amd64: DRAM ECC enabled.
[   11.728720] EDAC amd64: F10h detected (node 1).
[   11.733423] EDAC MC: DCT0 chip selects:
[   11.733427] EDAC amd64: MC: 0:  1024MB 1:     0MB
[   11.738269] EDAC amd64: MC: 2:     0MB 3:     0MB
[   11.743082] EDAC amd64: MC: 4:     0MB 5:     0MB
[   11.747927] EDAC amd64: MC: 6:     0MB 7:     0MB
[   11.752769] EDAC MC: DCT1 chip selects:
[   11.752772] EDAC amd64: MC: 0:     0MB 1:     0MB
[   11.757581] EDAC amd64: MC: 2:     0MB 3:     0MB
[   11.762418] EDAC amd64: MC: 4:     0MB 5:     0MB
[   11.767223] EDAC amd64: MC: 6:     0MB 7:     0MB
[   11.772049] EDAC amd64: using x4 syndromes.
[   11.776335] EDAC amd64: MCT channel count: 1
[   11.780796] EDAC amd64: CS0: Registered DDR2 RAM
[   11.785836] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[   11.796290] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   11.912849] ata1: SATA link down (SStatus 0 SControl 300)
[   11.936846] ata3: SATA link down (SStatus 0 SControl 300)
[   12.228739] ata2: SATA link down (SStatus 0 SControl 300)
[   12.544623] ata4: SATA link down (SStatus 0 SControl 300)