[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dffab000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-8435-g431e51e-dirty 03/21/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000160000000 aka 5632M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdffab max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
[    0.000000]  [mem 0x15fe00000-0x15fffffff] page 2M
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
[    0.000000]  [mem 0x15c000000-0x15fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
[    0.000000]  [mem 0x140000000-0x15bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdffaafff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xdfdfffff] page 2M
[    0.000000]  [mem 0xdfe00000-0xdffaafff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000DFFB40E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000DFFB68A0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000DFFB4250 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000DFFB4210 000040
[    0.000000] ACPI: SSDT 0x00000000DFFB69A0 000D57 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: APIC 0x00000000DFFB7700 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB77D0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB7948 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000DFFB7980 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB79C0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB7B38 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
[    0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[    0.000000]   NODE_DATA [mem 0x11fffb000-0x11fffffff]
[    0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
[    0.000000]   NODE_DATA [mem 0x15fff9000-0x15fffdfff]
[    0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
[    0.000000]  [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x15fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xdffaafff]
[    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
[    0.000000]   node   1: [mem 0x120000000-0x15fffffff]
[    0.000000] On node 0 totalpages: 1048393
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12487 pages used for memmap
[    0.000000]   DMA32 zone: 913323 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdffab000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
[    0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292597
[    0.000000] Policy zone: Normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xe5ea000000-0xe5ebffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
[    0.000000] Memory: 5015508K/5242148K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.861 MHz processor
[    0.000160] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.72 BogoMIPS (lpj=7639444)
[    0.010954] pid_max: default: 32768 minimum: 301
[    0.015676] ACPI: Core revision 20140424
[    0.022063] ACPI: All ACPI Tables successfully acquired
[    0.027567] Security Framework initialized
[    0.031745] AppArmor: AppArmor disabled by boot time parameter
[    0.037655] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.045459] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058799] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.068689] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.075715] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.083677] Initializing cgroup subsys memory
[    0.088141] Initializing cgroup subsys devices
[    0.092683] Initializing cgroup subsys freezer
[    0.097208] Initializing cgroup subsys net_cls
[    0.101753] Initializing cgroup subsys blkio
[    0.106107] Initializing cgroup subsys perf_event
[    0.110913] Initializing cgroup subsys net_prio
[    0.115571] tseg: 0000000000
[    0.115585] CPU: Physical Processor ID: 0
[    0.119704] CPU: Processor Core ID: 0
[    0.124499] mce: CPU supports 6 MCE banks
[    0.128641] LVT offset 0 assigned for vector 0xf9
[    0.133445] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.148923] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.158061] ftrace: allocating 21601 entries in 85 pages
[    0.173534] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.219180] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.336303] Performance Events: AMD PMU driver.
[    0.341028] ... version:                0
[    0.345129] ... bit width:              48
[    0.349313] ... generic registers:      4
[    0.353412] ... value mask:             0000ffffffffffff
[    0.358812] ... max period:             00007fffffffffff
[    0.364209] ... fixed-purpose events:   0
[    0.368313] ... event mask:             000000000000000f
[    0.376326] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.384656] x86: Booting SMP configuration:
[    0.388924] .... node  #0, CPUs:      #1 #2 #3
[    0.433531] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.585098] x86: Booted up 2 nodes, 8 CPUs
[    0.589527] smpboot: Total of 8 processors activated (30558.07 BogoMIPS)
[    0.602176] devtmpfs: initialized
[    0.614205] pinctrl core: initialized pinctrl subsystem
[    0.619677] NET: Registered protocol family 16
[    0.624404] cpuidle: using governor ladder
[    0.628582] cpuidle: using governor menu
[    0.632590] node 0 link 1: io port [1000, 3fff]
[    0.632593] TOM: 00000000e0000000 aka 3584M
[    0.636854] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.636858] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.636861] node 0 link 1: mmio [f8000000, fbffffff]
[    0.636864] TOM2: 0000000160000000 aka 5632M
[    0.641205] bus: [bus 00-05] on node 0 link 1
[    0.641207] bus: 00 [io  0x0000-0xffff]
[    0.641208] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.641210] bus: 00 [mem 0x160000000-0xfcffffffff]
[    0.641316] ACPI: bus type PCI registered
[    0.645406] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.652086] PCI: Using configuration type 1 for base access
[    0.657736] PCI: Using configuration type 1 for extended access
[    0.664359] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.670723] mtrr: probably your BIOS does not setup all CPUs.
[    0.676545] mtrr: corrected configuration.
[    0.693194] ACPI: Added _OSI(Module Device)
[    0.697495] ACPI: Added _OSI(Processor Device)
[    0.702015] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.706797] ACPI: Added _OSI(Processor Aggregator Device)
[    0.715696] ACPI: Interpreter enabled
[    0.719430] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.728907] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.738362] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.747791] ACPI: (supports S0 S1 S5)
[    0.751524] ACPI: Using IOAPIC for interrupt routing
[    0.756610] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.784710] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.790969] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.799280] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.838221] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.848342] PCI host bridge to bus 0000:00
[    0.852513] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.858069] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.864326] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.871277] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.878224] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.884490] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.884682] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.884689] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.884817] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.884828] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.884852] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.884861] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.884882] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.884986] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.885002] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.885028] pci 0000:00:02.0: supports D1 D2
[    0.885031] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.885079] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.890888] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.890901] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.890942] pci 0000:00:02.1: supports D1 D2
[    0.890962] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.891030] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.896845] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.896871] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.896895] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.904116] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.910732] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.917963] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.924693] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.924709] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.924721] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.924726] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.924730] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.924735] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.924740] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.924912] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.924924] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.924928] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.924933] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.924938] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.924942] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.924947] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.925083] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.925165] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.930980] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.931030] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.931079] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.936895] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.936950] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.937006] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.942822] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.942872] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.942923] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.948721] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.948770] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.948827] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.954646] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.954819] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.954927] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.955044] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.955186] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.955315] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.955442] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.955593] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.955724] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.955870] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.956069] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.956108] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.956120] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.956127] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.956174] pci 0000:01:04.0: supports D1 D2
[    0.956266] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.961329] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.961333] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.961336] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.961455] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.961495] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.961531] pci 0000:02:00.0: reg 0x30: [mem 0x29c00000-0x29c0ffff pref]
[    0.961618] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.961738] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.971866] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.976932] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.977038] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.977071] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.977176] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.977264] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.987379] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.992437] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.992517] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.997645] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.002735] pci_bus 0000:00: on NUMA node 0
[    1.002840] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    1.009270] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    1.015687] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.023348] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.031024] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.038681] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.046354] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.052760] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.059198] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.066862] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.074497] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.082135] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.088549] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.094975] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.102621] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.110271] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.117931] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.127038] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.133746] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.140444] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.147163] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.154136] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.159400] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.165181] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.173368] vgaarb: loaded
[    1.176157] vgaarb: bridge control possible 0000:01:04.0
[    1.181717] PCI: Using ACPI for IRQ routing
[    1.186005] PCI: pci_cache_line_size set to 64 bytes
[    1.186062] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.186066] e820: reserve RAM buffer [mem 0xdffab000-0xdfffffff]
[    1.186380] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.193516] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.198800] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.207525] Switched to clocksource hpet
[    1.223033] pnp: PnP ACPI init
[    1.226251] ACPI: bus type PNP registered
[    1.230890] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.230970] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.231069] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.231148] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.231189] pnp 00:04: [dma 2]
[    1.231231] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.231252] pnp: PnP ACPI: found 5 devices
[    1.235449] ACPI: bus type PNP unregistered
[    1.247537] pci 0000:02:00.0: can't claim BAR 6 [mem 0x29c00000-0x29c0ffff pref]: no compatible bridge window
[    1.257601] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.262650] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.268826] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.275689] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.283024] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.290369] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.295419] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.302298] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.307348] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.314217] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.319273] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.324316] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.324319] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
[    1.324322] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
[    1.324325] pci_bus 0000:00: resource 7 [io  0x0000-0x0cf7]
[    1.324328] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.324330] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.324333] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.324336] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.324339] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.324485] NET: Registered protocol family 2
[    1.329444] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.337232] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.344648] TCP: Hash tables configured (established 65536 bind 65536)
[    1.351340] TCP: reno registered
[    1.354657] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.360930] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.367794] NET: Registered protocol family 1
[    1.372622] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.378827] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.384821] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.390440] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.396016] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.401667] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.407275] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.412872] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.418528] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.424123] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.429708] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.435362] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.440961] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.446551] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.452193] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.457791] pci 0000:01:04.0: Video device with shadowed ROM
[    1.457799] PCI: CLS 64 bytes, default 64
[    1.457907] Unpacking initramfs...
[    1.690799] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.698839] PCI-DMA: Disabling AGP.
[    1.704043] PCI-DMA: aperture base @ d4000000 size 65536 KB
[    1.709720] PCI-DMA: using GART IOMMU.
[    1.713559] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.725688] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.734037] microcode: CPU0: patch_level=0x01000096
[    1.739038] microcode: CPU1: patch_level=0x01000096
[    1.744046] microcode: CPU2: patch_level=0x01000096
[    1.749056] microcode: CPU3: patch_level=0x01000096
[    1.754070] microcode: CPU4: patch_level=0x01000096
[    1.759066] microcode: CPU5: patch_level=0x01000096
[    1.764065] microcode: CPU6: patch_level=0x01000096
[    1.770165] microcode: CPU7: patch_level=0x01000096
[    1.775261] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.784197] LVT offset 1 assigned for vector 0x400
[    1.789119] IBS: LVT offset 1 assigned
[    1.793000] perf: AMD IBS detected (0x00000007)
[    1.798222] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.804718] audit: initializing netlink subsys (disabled)
[    1.810239] audit: type=2000 audit(1426986713.620:1): initialized
[    1.817144] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.823652] zbud: loaded
[    1.826616] VFS: Disk quotas dquot_6.5.2
[    1.830679] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.837333] msgmni has been set to 9941
[    1.841798] alg: No test for stdrng (krng)
[    1.846101] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.853749] io scheduler noop registered
[    1.857793] io scheduler deadline registered
[    1.862217] io scheduler cfq registered (default)
[    1.867217] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.867353] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.867482] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.867604] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.867768] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.867796] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.867822] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.867847] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.867867] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.874965] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.881580] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.881590] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.888633] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.895244] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.895254] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.902295] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.902307] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.909349] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.909379] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.915059] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.921878] GHES: HEST is not enabled!
[    1.925843] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.952632] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.980430] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.988472] Linux agpgart interface v0.103
[    1.992883] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.003409] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.008501] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.013827] mousedev: PS/2 mouse device common for all mice
[    2.019629] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.024841] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.031321] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.039281] ledtrig-cpu: registered to indicate activity on CPUs
[    2.045506] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.052047] AMD IOMMUv2 functionality not available on this system
[    2.058459] TCP: cubic registered
[    2.062033] NET: Registered protocol family 10
[    2.067000] mip6: Mobile IPv6
[    2.070062] NET: Registered protocol family 17
[    2.074666] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.083418] mpls_gso: MPLS GSO support
[    2.088133] registered taskstats version 1
[    2.093081] rtc_cmos rtc_cmos: setting system clock to 2015-03-22 01:11:55 UTC (1426986715)
[    2.101663] PM: Hibernation image not present or could not be loaded.
[    2.103506] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.111496] Write protecting the kernel read-only data: 8192k
[    2.120820] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.129553] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.149664] systemd-udevd[99]: starting version 215
[    2.155225] random: systemd-udevd urandom read with 4 bits of entropy available
[    2.178118] pps_core: LinuxPPS API ver. 1 registered
[    2.183206] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.192945] ACPI: bus type USB registered
[    2.197304] usbcore: registered new interface driver usbfs
[    2.197396] PTP clock support registered
[    2.206998] usbcore: registered new interface driver hub
[    2.212662] usbcore: registered new device driver usb
[    2.212749] tg3.c:v3.137 (May 11, 2014)
[    2.212762] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.212969] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.234333] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.241575] ehci-pci: EHCI PCI platform driver
[    2.246378] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.246461] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.246477] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.246498] ehci-pci 0000:00:02.1: debug port 1
[    2.246544] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.246572] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.255209] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.255276] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.255278] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.255280] usb usb1: Product: EHCI Host Controller
[    2.255281] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.255282] usb usb1: SerialNumber: 0000:00:02.1
[    2.255599] hub 1-0:1.0: USB hub found
[    2.255609] hub 1-0:1.0: 10 ports detected
[    2.320313] ohci-pci: OHCI PCI platform driver
[    2.325135] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.330881] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.338460] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.362334] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.372782] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.382652] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.390592] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.397476] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.401195] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.401197] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.401199] usb usb2: Product: OHCI PCI host controller
[    2.401200] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.401201] usb usb2: SerialNumber: 0000:00:02.0
[    2.401416] hub 2-0:1.0: USB hub found
[    2.401425] hub 2-0:1.0: 10 ports detected
[    2.441719] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.499033] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.509467] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.519353] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.527323] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.540763] FS-Cache: Loaded
[    2.547893] RPC: Registered named UNIX socket transport module.
[    2.554546] RPC: Registered udp transport module.
[    2.560609] RPC: Registered tcp transport module.
[    2.566702] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.579159] FS-Cache: Netfs 'nfs' registered for caching
[    2.593096] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.639161] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.723022] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[    3.726769] Switched to clocksource tsc
[    4.238686] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.245351] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.252343] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.680015] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    6.694193] systemd[1]: Detected architecture 'x86-64'.
[    6.970571] random: nonblocking pool is initialized
[    7.000892] systemd[1]: Inserted module 'autofs4'
[    7.007862] systemd[1]: Set hostname to <cb-test-tgt>.
[    7.434113] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    7.447022] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    7.462413] systemd[1]: Expecting device dev-ttyS0.device...
[    7.477542] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    7.485536] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.493246] systemd[1]: Starting Remote File Systems (Pre).
[    7.509491] systemd[1]: Reached target Remote File Systems (Pre).
[    7.515869] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    7.537418] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.547008] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    7.555224] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.563264] systemd[1]: Starting Paths.
[    7.577386] systemd[1]: Reached target Paths.
[    7.581904] systemd[1]: Starting Encrypted Volumes.
[    7.597385] systemd[1]: Reached target Encrypted Volumes.
[    7.602926] systemd[1]: Starting Swap.
[    7.617357] systemd[1]: Reached target Swap.
[    7.621783] systemd[1]: Starting Root Slice.
[    7.645438] systemd[1]: Created slice Root Slice.
[    7.650336] systemd[1]: Starting User and Session Slice.
[    7.665348] systemd[1]: Created slice User and Session Slice.
[    7.671258] systemd[1]: Starting Delayed Shutdown Socket.
[    7.685422] systemd[1]: Listening on Delayed Shutdown Socket.
[    7.691365] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    7.709346] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.716458] systemd[1]: Starting Journal Socket (/dev/log).
[    7.733325] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.739424] systemd[1]: Starting Syslog Socket.
[    7.753322] systemd[1]: Listening on Syslog Socket.
[    7.759477] systemd[1]: Starting udev Kernel Socket.
[    7.773317] systemd[1]: Listening on udev Kernel Socket.
[    7.778757] systemd[1]: Starting udev Control Socket.
[    7.793312] systemd[1]: Listening on udev Control Socket.
[    7.798869] systemd[1]: Starting Journal Socket.
[    7.813299] systemd[1]: Listening on Journal Socket.
[    7.818502] systemd[1]: Starting Sockets.
[    7.833289] systemd[1]: Reached target Sockets.
[    7.837980] systemd[1]: Starting System Slice.
[    7.853282] systemd[1]: Created slice System Slice.
[    7.858320] systemd[1]: Starting system-getty.slice.
[    7.873293] systemd[1]: Created slice system-getty.slice.
[    7.878845] systemd[1]: Starting system-serial\x2dgetty.slice.
[    7.897270] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    7.904406] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.926583] systemd[1]: Mounting Debug File System...
[    7.961743] systemd[1]: Started Set Up Additional Binary Formats.
[    7.968014] systemd[1]: Mounting Huge Pages File System...
[    7.993099] systemd[1]: Starting Load Kernel Modules...
[    8.010331] systemd[1]: Mounting POSIX Message Queue File System...
[    8.026314] systemd[1]: Starting udev Coldplug all Devices...
[    8.042107] systemd[1]: Starting Journal Service...
[    8.069266] systemd[1]: Started Journal Service.
[    8.806100] systemd-udevd[188]: starting version 215
[    9.259810] systemd-journald[167]: Received request to flush runtime journal from PID 1
[   10.143669] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[   10.151674] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[   10.161491] EDAC MC: Ver: 3.0.0
[   10.165199] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[   10.173733] ACPI: Power Button [PWRB]
[   10.177661] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   10.185188] ACPI: Power Button [PWRF]
[   10.189506] MCE: In-kernel MCE decoding enabled.
[   10.212417] FDC 0 is a post-1991 82077
[   10.227701] SCSI subsystem initialized
[   10.288918] acpi-cpufreq: overriding BIOS provided _PSD data
[   10.319768] AMD64 EDAC driver v3.4.0
[   10.319906] libata version 3.00 loaded.
[   10.324800] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   10.328597] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
[   10.328626] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[   10.440903] kvm: Nested Virtualization enabled
[   10.445483] kvm: Nested Paging enabled
[   13.559275] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[   13.564773] EDAC amd64: DRAM ECC enabled.
[   13.568970] EDAC amd64: F10h detected (node 0).
[   13.573631] EDAC MC: DCT0 chip selects:
[   13.573635] EDAC amd64: MC: 0:     0MB 1:     0MB
[   13.578420] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.583238] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.588036] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   13.592825] EDAC MC: DCT1 chip selects:
[   13.592828] EDAC amd64: MC: 0:     0MB 1:     0MB
[   13.597624] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.602415] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.607212] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   13.612002] EDAC amd64: using x4 syndromes.
[   13.616278] EDAC amd64: MCT channel count: 2
[   13.620744] EDAC amd64: CS6: Registered DDR2 RAM
[   13.625509] EDAC amd64: CS7: Registered DDR2 RAM
[   13.630680] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[   13.640584] EDAC amd64: DRAM ECC enabled.
[   13.644736] EDAC amd64: F10h detected (node 1).
[   13.649395] EDAC MC: DCT0 chip selects:
[   13.649400] EDAC amd64: MC: 0:  1024MB 1:     0MB
[   13.654197] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.658993] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.663779] EDAC amd64: MC: 6:     0MB 7:     0MB
[   13.668570] EDAC MC: DCT1 chip selects:
[   13.668573] EDAC amd64: MC: 0:     0MB 1:     0MB
[   13.673353] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.678152] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.682959] EDAC amd64: MC: 6:     0MB 7:     0MB
[   13.687746] EDAC amd64: using x4 syndromes.
[   13.692029] EDAC amd64: MCT channel count: 1
[   13.696427] EDAC amd64: CS0: Registered DDR2 RAM
[   13.701372] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[   13.711244] sata_nv 0000:00:07.0: version 3.5
[   13.711268] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   13.711700] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[   13.712447] scsi0 : sata_nv
[   13.731301] scsi1 : sata_nv
[   13.734315] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[   13.741554] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[   13.749136] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[   13.755415] scsi2 : sata_nv
[   13.758466] scsi3 : sata_nv
[   13.761404] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[   13.768617] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[   13.775938] pata_amd 0000:00:06.0: version 0.4.1
[   13.776611] scsi4 : pata_amd
[   13.779847] scsi5 : pata_amd
[   13.782861] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[   13.789915] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[   13.797135] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.059108] ata1: SATA link down (SStatus 0 SControl 300)
[   14.087108] ata3: SATA link down (SStatus 0 SControl 300)
[   14.375003] ata2: SATA link down (SStatus 0 SControl 300)
[   14.690898] ata4: SATA link down (SStatus 0 SControl 300)