[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dffab000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-8353-gf72d328 03/19/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000160000000 aka 5632M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdffab max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
[    0.000000]  [mem 0x15fe00000-0x15fffffff] page 2M
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
[    0.000000]  [mem 0x15c000000-0x15fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
[    0.000000]  [mem 0x140000000-0x15bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdffaafff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xdfdfffff] page 2M
[    0.000000]  [mem 0xdfe00000-0xdffaafff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000DFFB40E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000DFFB68A0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000DFFB4250 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000DFFB4210 000040
[    0.000000] ACPI: SSDT 0x00000000DFFB69A0 000D57 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: APIC 0x00000000DFFB7700 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB77D0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB7948 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000DFFB7980 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB79C0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB7B38 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
[    0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[    0.000000]   NODE_DATA [mem 0x11fffb000-0x11fffffff]
[    0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
[    0.000000]   NODE_DATA [mem 0x15fff9000-0x15fffdfff]
[    0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
[    0.000000]  [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x15fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xdffaafff]
[    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
[    0.000000]   node   1: [mem 0x120000000-0x15fffffff]
[    0.000000] On node 0 totalpages: 1048393
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12487 pages used for memmap
[    0.000000]   DMA32 zone: 913323 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdffab000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
[    0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292597
[    0.000000] Policy zone: Normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
[    0.000000] Memory: 5015508K/5242148K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.846 MHz processor
[    0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.69 BogoMIPS (lpj=7639384)
[    0.010953] pid_max: default: 32768 minimum: 301
[    0.015676] ACPI: Core revision 20140424
[    0.022060] ACPI: All ACPI Tables successfully acquired
[    0.027565] Security Framework initialized
[    0.031745] AppArmor: AppArmor disabled by boot time parameter
[    0.037655] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.045476] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058738] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.068554] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.075546] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.083499] Initializing cgroup subsys memory
[    0.087957] Initializing cgroup subsys devices
[    0.092502] Initializing cgroup subsys freezer
[    0.097026] Initializing cgroup subsys net_cls
[    0.101560] Initializing cgroup subsys blkio
[    0.105917] Initializing cgroup subsys perf_event
[    0.110713] Initializing cgroup subsys net_prio
[    0.115370] tseg: 0000000000
[    0.115384] CPU: Physical Processor ID: 0
[    0.119504] CPU: Processor Core ID: 0
[    0.124294] mce: CPU supports 6 MCE banks
[    0.128426] LVT offset 0 assigned for vector 0xf9
[    0.133228] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.148716] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.157850] ftrace: allocating 21601 entries in 85 pages
[    0.173284] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.218923] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.336302] Performance Events: AMD PMU driver.
[    0.341012] ... version:                0
[    0.345114] ... bit width:              48
[    0.349296] ... generic registers:      4
[    0.353384] ... value mask:             0000ffffffffffff
[    0.358786] ... max period:             00007fffffffffff
[    0.364191] ... fixed-purpose events:   0
[    0.368286] ... event mask:             000000000000000f
[    0.376316] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.384652] x86: Booting SMP configuration:
[    0.388932] .... node  #0, CPUs:      #1 #2 #3
[    0.433537] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.585082] x86: Booted up 2 nodes, 8 CPUs
[    0.589509] smpboot: Total of 8 processors activated (30558.00 BogoMIPS)
[    0.602148] devtmpfs: initialized
[    0.614123] pinctrl core: initialized pinctrl subsystem
[    0.619588] NET: Registered protocol family 16
[    0.624324] cpuidle: using governor ladder
[    0.628496] cpuidle: using governor menu
[    0.632501] node 0 link 1: io port [1000, 3fff]
[    0.632505] TOM: 00000000e0000000 aka 3584M
[    0.636769] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.636773] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.636776] node 0 link 1: mmio [f8000000, fbffffff]
[    0.636779] TOM2: 0000000160000000 aka 5632M
[    0.641142] bus: [bus 00-05] on node 0 link 1
[    0.641144] bus: 00 [io  0x0000-0xffff]
[    0.641146] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.641148] bus: 00 [mem 0x160000000-0xfcffffffff]
[    0.641252] ACPI: bus type PCI registered
[    0.645338] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.652013] PCI: Using configuration type 1 for base access
[    0.657661] PCI: Using configuration type 1 for extended access
[    0.664279] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.670648] mtrr: probably your BIOS does not setup all CPUs.
[    0.676475] mtrr: corrected configuration.
[    0.693190] ACPI: Added _OSI(Module Device)
[    0.697500] ACPI: Added _OSI(Processor Device)
[    0.702022] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.706805] ACPI: Added _OSI(Processor Aggregator Device)
[    0.715775] ACPI: Interpreter enabled
[    0.719537] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.729027] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.738481] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.747929] ACPI: (supports S0 S1 S5)
[    0.751671] ACPI: Using IOAPIC for interrupt routing
[    0.756764] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.785233] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.791514] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.799834] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.837853] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.847977] PCI host bridge to bus 0000:00
[    0.852156] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.857719] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.863977] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.870936] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.877891] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.884165] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.884357] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.884365] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.884493] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.884501] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.884524] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.884544] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.884569] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.884673] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.884689] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.884715] pci 0000:00:02.0: supports D1 D2
[    0.884727] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.884775] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.890579] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.890593] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.890637] pci 0000:00:02.1: supports D1 D2
[    0.890648] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.890725] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.896534] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.896561] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.896589] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.903815] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.910431] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.917659] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.924363] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.924379] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.924389] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.924397] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.924402] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.924406] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.924411] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.924600] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.924607] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.924614] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.924619] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.924623] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.924628] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.924633] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.924806] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.924912] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.930714] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.930763] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.930815] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.936624] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.936677] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.936800] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.942610] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.942660] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.942708] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.948522] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.948571] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.948628] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.954450] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.954626] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.954755] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.954862] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.955003] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.955171] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.955298] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.955408] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.955539] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.955715] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.955900] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.955920] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.955930] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.955937] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.955981] pci 0000:01:04.0: supports D1 D2
[    0.956094] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.961147] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.961150] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.961153] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.961275] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.961307] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.961343] pci 0000:02:00.0: reg 0x30: [mem 0x29c00000-0x29c0ffff pref]
[    0.961428] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.961512] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.971647] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.976703] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.976812] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.976837] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.976943] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.977025] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.987155] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.992217] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.992301] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.997425] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.002504] pci_bus 0000:00: on NUMA node 0
[    1.002607] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    1.009049] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    1.015467] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.023122] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.030787] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.038448] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.046117] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.052548] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.058974] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.066637] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.074296] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.081979] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.088382] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.094803] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.102466] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.110103] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.117775] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.126882] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.133608] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.140325] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.147052] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.154044] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.159296] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.165077] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.173276] vgaarb: loaded
[    1.176060] vgaarb: bridge control possible 0000:01:04.0
[    1.181622] PCI: Using ACPI for IRQ routing
[    1.185903] PCI: pci_cache_line_size set to 64 bytes
[    1.185960] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.185963] e820: reserve RAM buffer [mem 0xdffab000-0xdfffffff]
[    1.186276] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.193411] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.198695] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.207430] Switched to clocksource hpet
[    1.222931] pnp: PnP ACPI init
[    1.226147] ACPI: bus type PNP registered
[    1.230784] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.230865] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.230965] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.231043] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.231084] pnp 00:04: [dma 2]
[    1.231126] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.231148] pnp: PnP ACPI: found 5 devices
[    1.235353] ACPI: bus type PNP unregistered
[    1.247433] pci 0000:02:00.0: can't claim BAR 6 [mem 0x29c00000-0x29c0ffff pref]: no compatible bridge window
[    1.257510] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.262550] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.268731] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.275600] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.282936] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.290289] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.295332] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.302208] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.307253] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.314129] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.319194] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.324245] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.324248] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
[    1.324251] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
[    1.324254] pci_bus 0000:00: resource 7 [io  0x0000-0x0cf7]
[    1.324257] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.324259] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.324262] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.324265] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.324268] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.324405] NET: Registered protocol family 2
[    1.329346] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.337130] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.344566] TCP: Hash tables configured (established 65536 bind 65536)
[    1.351250] TCP: reno registered
[    1.354578] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.360852] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.367715] NET: Registered protocol family 1
[    1.372571] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.378770] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.384753] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.390364] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.395956] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.401609] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.407221] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.412827] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.418485] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.424081] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.429666] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.435326] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.440925] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.446516] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.452176] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.457764] pci 0000:01:04.0: Video device with shadowed ROM
[    1.457772] PCI: CLS 64 bytes, default 64
[    1.457883] Unpacking initramfs...
[    1.690899] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.698878] PCI-DMA: Disabling AGP.
[    1.704101] PCI-DMA: aperture base @ d4000000 size 65536 KB
[    1.709802] PCI-DMA: using GART IOMMU.
[    1.713646] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.725754] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.734097] microcode: CPU0: patch_level=0x01000096
[    1.739097] microcode: CPU1: patch_level=0x01000096
[    1.744113] microcode: CPU2: patch_level=0x01000096
[    1.749116] microcode: CPU3: patch_level=0x01000096
[    1.754129] microcode: CPU4: patch_level=0x01000096
[    1.759122] microcode: CPU5: patch_level=0x01000096
[    1.764112] microcode: CPU6: patch_level=0x01000096
[    1.770221] microcode: CPU7: patch_level=0x01000096
[    1.775309] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.784249] LVT offset 1 assigned for vector 0x400
[    1.789146] IBS: LVT offset 1 assigned
[    1.793022] perf: AMD IBS detected (0x00000007)
[    1.798246] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.804735] audit: initializing netlink subsys (disabled)
[    1.810244] audit: type=2000 audit(1426813852.620:1): initialized
[    1.817160] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.823684] zbud: loaded
[    1.826640] VFS: Disk quotas dquot_6.5.2
[    1.830698] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.837337] msgmni has been set to 9941
[    1.841791] alg: No test for stdrng (krng)
[    1.846083] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.853719] io scheduler noop registered
[    1.857751] io scheduler deadline registered
[    1.862191] io scheduler cfq registered (default)
[    1.867202] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.867332] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.867460] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.867581] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.867732] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.867760] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.867786] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.867812] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.867832] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.874923] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.881544] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.881555] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.888598] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.895202] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.895213] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.902261] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.902272] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.909314] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.909343] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.915028] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.921853] GHES: HEST is not enabled!
[    1.925814] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.952614] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.980407] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.988447] Linux agpgart interface v0.103
[    1.992880] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.003400] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.008507] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.013835] mousedev: PS/2 mouse device common for all mice
[    2.019647] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.024850] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.031346] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.039308] ledtrig-cpu: registered to indicate activity on CPUs
[    2.045529] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.052050] AMD IOMMUv2 functionality not available on this system
[    2.058452] TCP: cubic registered
[    2.061983] NET: Registered protocol family 10
[    2.066941] mip6: Mobile IPv6
[    2.070012] NET: Registered protocol family 17
[    2.074611] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.083389] mpls_gso: MPLS GSO support
[    2.088138] registered taskstats version 1
[    2.093054] rtc_cmos rtc_cmos: setting system clock to 2015-03-20 01:10:54 UTC (1426813854)
[    2.101634] PM: Hibernation image not present or could not be loaded.
[    2.103453] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.111458] Write protecting the kernel read-only data: 8192k
[    2.120811] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.129540] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.149641] systemd-udevd[99]: starting version 215
[    2.155201] random: systemd-udevd urandom read with 4 bits of entropy available
[    2.178477] pps_core: LinuxPPS API ver. 1 registered
[    2.178514] ACPI: bus type USB registered
[    2.178601] usbcore: registered new interface driver usbfs
[    2.178622] usbcore: registered new interface driver hub
[    2.178706] usbcore: registered new device driver usb
[    2.203735] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.213312] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.220266] PTP clock support registered
[    2.224595] ehci-pci: EHCI PCI platform driver
[    2.229446] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.229511] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.229536] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.229558] ehci-pci 0000:00:02.1: debug port 1
[    2.229605] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.229637] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.239131] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.239222] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.239224] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.239226] usb usb1: Product: EHCI Host Controller
[    2.239227] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.239228] usb usb1: SerialNumber: 0000:00:02.1
[    2.239580] hub 1-0:1.0: USB hub found
[    2.239590] hub 1-0:1.0: 10 ports detected
[    2.303171] tg3.c:v3.137 (May 11, 2014)
[    2.307250] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.307339] ohci-pci: OHCI PCI platform driver
[    2.307586] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.307604] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.307674] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.336644] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.365150] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.372089] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.379442] usb usb2: Product: OHCI PCI host controller
[    2.384761] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.390602] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.390605] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.390607] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.390609] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.390765] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.390979] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.437346] usb usb2: SerialNumber: 0000:00:02.0
[    2.442268] hub 2-0:1.0: USB hub found
[    2.446134] hub 2-0:1.0: 10 ports detected
[    2.491538] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.501940] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.511812] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.519770] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.533318] FS-Cache: Loaded
[    2.540359] RPC: Registered named UNIX socket transport module.
[    2.546975] RPC: Registered udp transport module.
[    2.553039] RPC: Registered tcp transport module.
[    2.559163] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.571600] FS-Cache: Netfs 'nfs' registered for caching
[    2.586028] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.631071] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.722927] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[    3.726669] Switched to clocksource tsc
[    4.224219] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.230902] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.237896] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.324789] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    5.338970] systemd[1]: Detected architecture 'x86-64'.
[    5.549862] systemd[1]: Inserted module 'autofs4'
[    5.556723] systemd[1]: Set hostname to <cb-test-tgt>.
[    5.579146] random: nonblocking pool is initialized
[    5.887356] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    5.900252] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    5.915636] systemd[1]: Expecting device dev-ttyS0.device...
[    5.929874] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    5.937755] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.945443] systemd[1]: Starting Remote File Systems (Pre).
[    5.961929] systemd[1]: Reached target Remote File Systems (Pre).
[    5.968292] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    5.989920] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.999567] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.007780] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.015819] systemd[1]: Starting Paths.
[    6.029894] systemd[1]: Reached target Paths.
[    6.034434] systemd[1]: Starting Encrypted Volumes.
[    6.049817] systemd[1]: Reached target Encrypted Volumes.
[    6.055346] systemd[1]: Starting Swap.
[    6.069798] systemd[1]: Reached target Swap.
[    6.074190] systemd[1]: Starting Root Slice.
[    6.097832] systemd[1]: Created slice Root Slice.
[    6.102707] systemd[1]: Starting User and Session Slice.
[    6.117824] systemd[1]: Created slice User and Session Slice.
[    6.123750] systemd[1]: Starting Delayed Shutdown Socket.
[    6.137804] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.143732] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.161770] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.168850] systemd[1]: Starting Journal Socket (/dev/log).
[    6.185772] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.191834] systemd[1]: Starting Syslog Socket.
[    6.205765] systemd[1]: Listening on Syslog Socket.
[    6.211906] systemd[1]: Starting udev Kernel Socket.
[    6.225753] systemd[1]: Listening on udev Kernel Socket.
[    6.231223] systemd[1]: Starting udev Control Socket.
[    6.245735] systemd[1]: Listening on udev Control Socket.
[    6.251287] systemd[1]: Starting Journal Socket.
[    6.265729] systemd[1]: Listening on Journal Socket.
[    6.270847] systemd[1]: Starting Sockets.
[    6.285718] systemd[1]: Reached target Sockets.
[    6.290365] systemd[1]: Starting System Slice.
[    6.305729] systemd[1]: Created slice System Slice.
[    6.310798] systemd[1]: Starting system-getty.slice.
[    6.325712] systemd[1]: Created slice system-getty.slice.
[    6.331257] systemd[1]: Starting system-serial\x2dgetty.slice.
[    6.349702] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    6.356664] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.378866] systemd[1]: Mounting Debug File System...
[    6.406699] systemd[1]: Started Set Up Additional Binary Formats.
[    6.413004] systemd[1]: Mounting Huge Pages File System...
[    6.457757] systemd[1]: Starting Load Kernel Modules...
[    6.475800] systemd[1]: Mounting POSIX Message Queue File System...
[    6.495405] systemd[1]: Starting udev Coldplug all Devices...
[    6.511480] systemd[1]: Starting Journal Service...
[    6.537753] systemd[1]: Started Journal Service.
[    6.984473] systemd-udevd[185]: starting version 215
[    7.269437] systemd-journald[167]: Received request to flush runtime journal from PID 1
[    7.733289] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    7.741287] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[    7.751569] EDAC MC: Ver: 3.0.0
[    7.757690] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    7.766210] ACPI: Power Button [PWRB]
[    7.770066] MCE: In-kernel MCE decoding enabled.
[    7.770175] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    7.770179] ACPI: Power Button [PWRF]
[    7.805456] SCSI subsystem initialized
[    7.833135] FDC 0 is a post-1991 82077
[    7.904007] libata version 3.00 loaded.
[    7.905899] AMD64 EDAC driver v3.4.0
[    7.910063] acpi-cpufreq: overriding BIOS provided _PSD data
[    7.919840] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    7.933357] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
[    7.940686] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[    8.027459] kvm: Nested Virtualization enabled
[    8.032073] kvm: Nested Paging enabled
[   11.180014] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[   11.185561] EDAC amd64: DRAM ECC enabled.
[   11.189753] EDAC amd64: F10h detected (node 0).
[   11.194448] EDAC MC: DCT0 chip selects:
[   11.194452] EDAC amd64: MC: 0:     0MB 1:     0MB
[   11.199288] EDAC amd64: MC: 2:     0MB 3:     0MB
[   11.204095] EDAC amd64: MC: 4:     0MB 5:     0MB
[   11.208893] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   11.213693] EDAC MC: DCT1 chip selects:
[   11.213696] EDAC amd64: MC: 0:     0MB 1:     0MB
[   11.218492] EDAC amd64: MC: 2:     0MB 3:     0MB
[   11.223289] EDAC amd64: MC: 4:     0MB 5:     0MB
[   11.228079] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   11.232879] EDAC amd64: using x4 syndromes.
[   11.237152] EDAC amd64: MCT channel count: 2
[   11.241598] EDAC amd64: CS6: Registered DDR2 RAM
[   11.246364] EDAC amd64: CS7: Registered DDR2 RAM
[   11.251499] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[   11.261415] EDAC amd64: DRAM ECC enabled.
[   11.265620] EDAC amd64: F10h detected (node 1).
[   11.270298] EDAC MC: DCT0 chip selects:
[   11.270302] EDAC amd64: MC: 0:  1024MB 1:     0MB
[   11.275109] EDAC amd64: MC: 2:     0MB 3:     0MB
[   11.279910] EDAC amd64: MC: 4:     0MB 5:     0MB
[   11.284710] EDAC amd64: MC: 6:     0MB 7:     0MB
[   11.289507] EDAC MC: DCT1 chip selects:
[   11.289510] EDAC amd64: MC: 0:     0MB 1:     0MB
[   11.294308] EDAC amd64: MC: 2:     0MB 3:     0MB
[   11.299107] EDAC amd64: MC: 4:     0MB 5:     0MB
[   11.303905] EDAC amd64: MC: 6:     0MB 7:     0MB
[   11.308709] EDAC amd64: using x4 syndromes.
[   11.312982] EDAC amd64: MCT channel count: 1
[   11.317405] EDAC amd64: CS0: Registered DDR2 RAM
[   11.322379] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[   11.332270] pata_amd 0000:00:06.0: version 0.4.1
[   11.332994] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   11.344220] scsi0 : pata_amd
[   11.347566] scsi1 : pata_amd
[   11.350641] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[   11.357714] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[   11.364896] sata_nv 0000:00:07.0: version 3.5
[   11.365332] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[   11.372025] scsi2 : sata_nv
[   11.375109] scsi3 : sata_nv
[   11.378081] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[   11.385317] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[   11.392812] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[   11.399100] scsi4 : sata_nv
[   11.403220] scsi5 : sata_nv
[   11.407337] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[   11.415781] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[   11.424454] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.703838] ata3: SATA link down (SStatus 0 SControl 300)
[   11.735821] ata5: SATA link down (SStatus 0 SControl 300)
[   12.019707] ata4: SATA link down (SStatus 0 SControl 300)
[   12.335607] ata6: SATA link down (SStatus 0 SControl 300)