[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=4fcc9a5d-b1f6-4986-9caf-7a7651ac83f2 ro console=ttyS0,115200
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffdffff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffe0000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fecc0000-0x00000000fecc0fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: ASUS A8V-E SE, BIOS 4.0-5192-g812d624 01/03/2014
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP bridge at 00:00:00
[    0.000000] Aperture from AGP @ c0000000 old size 32 MB
[    0.000000] Aperture from AGP @ c0000000 size 256 MB (APSIZE f00)
[    0.000000] e820: last_pfn = 0x1ffe0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFE0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000fd950-0x000fd95f] mapped at [ffff8800000fd950]
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x1ffdffff]
[    0.000000]  [mem 0x00000000-0x1fdfffff] page 2M
[    0.000000]  [mem 0x1fe00000-0x1ffdffff] page 4k
[    0.000000] kernel direct mapping tables up to 0x1ffdffff @ [mem 0x1ffdd000-0x1ffdffff]
[    0.000000] RAMDISK: [mem 0x1eaab000-0x1f931fff]
[    0.000000] ACPI: RSDP 00000000000fd930 00014 (v00 CORE  )
[    0.000000] ACPI: RSDT 000000001ffe1424 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 000000001ffe1ed5 000F4 (v04 CORE   COREBOOT 00000000 CORE 0000002A)
[    0.000000] ACPI: DSDT 000000001ffe1508 009CD (v01 CORE   COREBOOT 00000001 INTL 20130626)
[    0.000000] ACPI: FACS 000000001ffe14c8 00040
[    0.000000] ACPI: APIC 000000001ffe1fc9 00066 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: MCFG 000000001ffe202f 0003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 000000001ffe206b 00090 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 000000001ffe20fb 00273 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0x1fffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x1ffdffff] -> [mem 0x00000000-0x1ffdffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x1ffdffff]
[    0.000000]   NODE_DATA [mem 0x1ffd9000-0x1ffdcfff]
[    0.000000]  [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001de00000-ffff88001e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x1ffdffff]
[    0.000000] On node 0 totalpages: 130927
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3913 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 1984 pages used for memmap
[    0.000000]   DMA32 zone: 124960 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 64
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] e820: [mem 0x20000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88001fc00000 s83584 r8192 d22912 u2097152
[    0.000000] pcpu-alloc: s83584 r8192 d22912 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 128873
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=4fcc9a5d-b1f6-4986-9caf-7a7651ac83f2 ro console=ttyS0,115200
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Checking aperture...
[    0.000000] AGP bridge at 00:00:00
[    0.000000] Aperture from AGP @ c0000000 old size 32 MB
[    0.000000] Aperture from AGP @ c0000000 size 256 MB (APSIZE f00)
[    0.000000] Node 0: aperture @ f4000000 size 64 MB
[    0.000000] Memory: 484708k/524160k available (6711k kernel code, 452k absent, 39000k reserved, 6459k data, 928k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16640 nr_irqs:256 16
[    0.000000] Extended CMOS year: 5100
[    0.000000] WARNING: Persistent clock returned invalid value!
[    0.000000]          Check your CMOS/BIOS settings.
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 2097152 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1000.021 MHz processor.
[    0.012005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.04 BogoMIPS (lpj=4000084)
[    0.018799] pid_max: default: 32768 minimum: 301
[    0.020058] Security Framework initialized
[    0.024039] AppArmor: AppArmor initialized
[    0.028006] Yama: becoming mindful.
[    0.032207] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.040023] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.044261] Mount-cache hash table entries: 256
[    0.052141] Initializing cgroup subsys cpuacct
[    0.056010] Initializing cgroup subsys memory
[    0.060025] Initializing cgroup subsys devices
[    0.064010] Initializing cgroup subsys freezer
[    0.068009] Initializing cgroup subsys blkio
[    0.072009] Initializing cgroup subsys perf_event
[    0.076057] tseg: 0000000000
[    0.076084] mce: CPU supports 5 MCE banks
[    0.080073] SMP alternatives: switching to UP code
[    0.103448] Freeing SMP alternatives: 24k freed
[    0.108035] ACPI: Core revision 20120320
[    0.112726] ftrace: allocating 25118 entries in 99 pages
[    0.137404] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.181936] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00
[    0.188011] Performance Events: AMD PMU driver.
[    0.188014] ... version:                0
[    0.192013] ... bit width:              48
[    0.196013] ... generic registers:      4
[    0.200014] ... value mask:             0000ffffffffffff
[    0.204014] ... max period:             00007fffffffffff
[    0.208014] ... fixed-purpose events:   0
[    0.212015] ... event mask:             000000000000000f
[    0.216381] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.220072] Brought up 1 CPUs
[    0.224018] Total of 1 processors activated (2000.04 BogoMIPS).
[    0.228933] devtmpfs: initialized
[    0.237758] EVM: security.selinux
[    0.240017] EVM: security.SMACK64
[    0.244017] EVM: security.capability
[    0.249966] dummy: 
[    0.252084] RTC time: 23:01:24, date: 01/03/14
[    0.256095] NET: Registered protocol family 16
[    0.260275] node 0 link 0: io port [1000, 3fff]
[    0.260282] TOM: 0000000020000000 aka 512M
[    0.264022] node 0 link 0: mmio [a0000, bffff]
[    0.264029] node 0 link 0: mmio [e0000000, f02fffff]
[    0.264034] node 0 link 0: mmio [c0000000, d7ffffff]
[    0.264039] bus: [00, 06] on node 0 link 0
[    0.264044] bus: 00 [io  0x0000-0xffff]
[    0.264048] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.264052] bus: 00 [mem 0xd8000000-0xfcffffffff]
[    0.264055] bus: 00 [mem 0x20000000-0xd7ffffff]
[    0.264148] ACPI FADT declares the system doesn't support MSI, so disable it
[    0.268019] ACPI: bus type pci registered
[    0.272122] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.276021] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.296604] PCI: Using configuration type 1 for base access
[    0.304236] bio: create slab <bio-0> at 0
[    0.308242] ACPI: Added _OSI(Module Device)
[    0.312028] ACPI: Added _OSI(Processor Device)
[    0.316022] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.320022] ACPI: Added _OSI(Processor Aggregator Device)
[    0.324290] ACPI: EC: Look up EC in DSDT
[    0.328771] ACPI: Interpreter enabled
[    0.332025] ACPI: (supports S0 S5)
[    0.335476] ACPI: Using IOAPIC for interrupt routing
[    0.337179] ACPI: No dock devices found.
[    0.340029] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.349856] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-06])
[    0.357667] pci_root PNP0A03:00: >host bridge window [io  0x03b0-0x03df]
[    0.360028] pci_root PNP0A03:00: >host bridge window [io  0x0d00-0x3fff]
[    0.364027] pci_root PNP0A03:00: >host bridge window [mem 0xc0000000-0xd7ffffff]
[    0.368027] pci_root PNP0A03:00: >host bridge window [mem 0xe0000000-0xf02fffff]
[    0.372028] pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff]
[    0.376028] pci_root PNP0A03:00: >host bridge window [io  0x0000-0x0cf7]
[    0.380030] pci_root PNP0A03:00: >host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x0000-0x0cf7] ignored
[    0.384089] PCI host bridge to bus 0000:00
[    0.388030] pci_bus 0000:00: >root bus resource [io  0x0000-0x0cf7]
[    0.392029] pci_bus 0000:00: >root bus resource [io  0x0d00-0x3fff]
[    0.396029] pci_bus 0000:00: >root bus resource [mem 0xc0000000-0xd7ffffff]
[    0.400029] pci_bus 0000:00: >root bus resource [mem 0xe0000000-0xf02fffff]
[    0.404030] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
[    0.408052] pci 0000:00:00.0: >[1106:0238] type 00 class 0x060000
[    0.408068] pci 0000:00:00.0: >reg 10: [mem 0xc0000000-0xcfffffff pref]
[    0.408177] pci 0000:00:00.1: >[1106:1238] type 00 class 0x060000
[    0.408233] pci 0000:00:00.2: >[1106:2238] type 00 class 0x060000
[    0.412033] pci 0000:00:00.3: >[1106:3238] type 00 class 0x060000
[    0.412089] pci 0000:00:00.4: >[1106:4238] type 00 class 0x060000
[    0.412144] pci 0000:00:00.5: >[1106:5238] type 00 class 0x080020
[    0.412221] pci 0000:00:00.7: >[1106:7238] type 00 class 0x060000
[    0.412280] pci 0000:00:01.0: >[1106:b188] type 01 class 0x060400
[    0.412358] pci 0000:00:02.0: >[1106:a238] type 01 class 0x060400
[    0.412448] pci 0000:00:02.0: >PME# supported from D0 D3hot D3cold
[    0.412487] pci 0000:00:03.0: >[1106:c238] type 01 class 0x060400
[    0.412576] pci 0000:00:03.0: >PME# supported from D0 D3hot D3cold
[    0.412610] pci 0000:00:03.1: >[1106:d238] type 01 class 0x060400
[    0.412699] pci 0000:00:03.1: >PME# supported from D0 D3hot D3cold
[    0.412733] pci 0000:00:03.2: >[1106:e238] type 01 class 0x060400
[    0.412822] pci 0000:00:03.2: >PME# supported from D0 D3hot D3cold
[    0.412856] pci 0000:00:03.3: >[1106:f238] type 01 class 0x060400
[    0.412944] pci 0000:00:03.3: >PME# supported from D0 D3hot D3cold
[    0.412998] pci 0000:00:0f.0: >[1106:3149] type 00 class 0x01018f
[    0.413020] pci 0000:00:0f.0: >reg 10: [io  0x3ca0-0x3ca7]
[    0.413034] pci 0000:00:0f.0: >reg 14: [io  0x3cb0-0x3cb3]
[    0.413047] pci 0000:00:0f.0: >reg 18: [io  0x3ca8-0x3caf]
[    0.413061] pci 0000:00:0f.0: >reg 1c: [io  0x3cb4-0x3cb7]
[    0.413074] pci 0000:00:0f.0: >reg 20: [io  0x3c80-0x3c8f]
[    0.413088] pci 0000:00:0f.0: >reg 24: [io  0x3000-0x30ff]
[    0.413150] pci 0000:00:0f.1: >[1106:0571] type 00 class 0x01018a
[    0.413204] pci 0000:00:0f.1: >reg 20: [io  0x3c90-0x3c9f]
[    0.413283] pci 0000:00:10.0: >[1106:3038] type 00 class 0x0c0300
[    0.413335] pci 0000:00:10.0: >reg 20: [io  0x3c00-0x3c1f]
[    0.413382] pci 0000:00:10.0: >supports D1 D2
[    0.413387] pci 0000:00:10.0: >PME# supported from D0 D1 D2 D3hot D3cold
[    0.413413] pci 0000:00:10.1: >[1106:3038] type 00 class 0x0c0300
[    0.413464] pci 0000:00:10.1: >reg 20: [io  0x3c20-0x3c3f]
[    0.413512] pci 0000:00:10.1: >supports D1 D2
[    0.413517] pci 0000:00:10.1: >PME# supported from D0 D1 D2 D3hot D3cold
[    0.413546] pci 0000:00:10.2: >[1106:3038] type 00 class 0x0c0300
[    0.413597] pci 0000:00:10.2: >reg 20: [io  0x3c40-0x3c5f]
[    0.413645] pci 0000:00:10.2: >supports D1 D2
[    0.413650] pci 0000:00:10.2: >PME# supported from D0 D1 D2 D3hot D3cold
[    0.413676] pci 0000:00:10.3: >[1106:3038] type 00 class 0x0c0300
[    0.413727] pci 0000:00:10.3: >reg 20: [io  0x3c60-0x3c7f]
[    0.413774] pci 0000:00:10.3: >supports D1 D2
[    0.413779] pci 0000:00:10.3: >PME# supported from D0 D1 D2 D3hot D3cold
[    0.413805] pci 0000:00:10.4: >[1106:3104] type 00 class 0x0c0320
[    0.413826] pci 0000:00:10.4: >reg 10: [mem 0xf0200000-0xf02000ff]
[    0.413904] pci 0000:00:10.4: >supports D1 D2
[    0.413909] pci 0000:00:10.4: >PME# supported from D0 D1 D2 D3hot D3cold
[    0.413941] pci 0000:00:11.0: >[1106:3227] type 00 class 0x060100
[    0.414009] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.416085] pci 0000:00:11.5: >[1106:3059] type 00 class 0x040100
[    0.416107] pci 0000:00:11.5: >reg 10: [io  0x3400-0x34ff]
[    0.416189] pci 0000:00:11.5: >supports D1 D2
[    0.416213] pci 0000:00:11.6: >[1106:3068] type 00 class 0x078000
[    0.416235] pci 0000:00:11.6: >reg 10: [io  0x3800-0x38ff]
[    0.416344] pci 0000:00:18.0: >[1022:1100] type 00 class 0x060000
[    0.416383] pci 0000:00:18.1: >[1022:1101] type 00 class 0x060000
[    0.416418] pci 0000:00:18.2: >[1022:1102] type 00 class 0x060000
[    0.416450] pci 0000:00:18.3: >[1022:1103] type 00 class 0x060000
[    0.416551] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[    0.420097] pci 0000:02:00.0: >[1002:5b60] type 00 class 0x030000
[    0.420116] pci 0000:02:00.0: >reg 10: [mem 0xd0000000-0xd7ffffff pref]
[    0.420130] pci 0000:02:00.0: >reg 14: [io  0x1000-0x10ff]
[    0.420144] pci 0000:02:00.0: >reg 18: [mem 0xf0020000-0xf002ffff]
[    0.420181] pci 0000:02:00.0: >reg 30: [mem 0xf0000000-0xf001ffff pref]
[    0.420231] pci 0000:02:00.0: >supports D1 D2
[    0.420265] pci 0000:02:00.1: >[1002:5b70] type 00 class 0x038000
[    0.420282] pci 0000:02:00.1: >reg 10: [mem 0xf0030000-0xf003ffff]
[    0.420370] pci 0000:02:00.1: >supports D1 D2
[    0.420392] pci 0000:02:00.0: >disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.424042] pci 0000:00:02.0: >PCI bridge to [bus 02-02]
[    0.428033] pci 0000:00:02.0: >  bridge window [io  0x1000-0x1fff]
[    0.428041] pci 0000:00:02.0: >  bridge window [mem 0xf0000000-0xf00fffff]
[    0.428049] pci 0000:00:02.0: >  bridge window [mem 0xd0000000-0xd7ffffff pref]
[    0.428099] pci 0000:00:03.0: >PCI bridge to [bus 03-03]
[    0.432086] pci 0000:00:03.1: >PCI bridge to [bus 04-04]
[    0.436107] pci 0000:05:00.0: >[11ab:4362] type 00 class 0x020000
[    0.436134] pci 0000:05:00.0: >reg 10: [mem 0xf0120000-0xf0123fff 64bit]
[    0.436150] pci 0000:05:00.0: >reg 18: [io  0x2000-0x20ff]
[    0.436196] pci 0000:05:00.0: >reg 30: [mem 0xf0100000-0xf011ffff pref]
[    0.436268] pci 0000:05:00.0: >supports D1 D2
[    0.436273] pci 0000:05:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
[    0.436292] pci 0000:05:00.0: >disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.440040] pci 0000:00:03.2: >PCI bridge to [bus 05-05]
[    0.444034] pci 0000:00:03.2: >  bridge window [io  0x2000-0x2fff]
[    0.444042] pci 0000:00:03.2: >  bridge window [mem 0xf0100000-0xf01fffff]
[    0.444094] pci 0000:00:03.3: >PCI bridge to [bus 06-06]
[    0.448072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.448203] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGG._PRT]
[    0.448239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.448269] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[    0.448298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[    0.448327] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    0.448360]  pci0000:00: >Unable to request _OSC control (_OSC support mask: 0x0f)
[    0.459493] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.460033] vgaarb: loaded
[    0.464031] vgaarb: bridge control possible 0000:02:00.0
[    0.468432] SCSI subsystem initialized
[    0.472139] libata version 3.00 loaded.
[    0.472180] ACPI: bus type usb registered
[    0.476094] usbcore: registered new interface driver usbfs
[    0.480050] usbcore: registered new interface driver hub
[    0.484076] usbcore: registered new device driver usb
[    0.492076] PCI: Using ACPI for IRQ routing
[    0.504935] PCI: pci_cache_line_size set to 64 bytes
[    0.505090] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.505094] e820: reserve RAM buffer [mem 0x1ffe0000-0x1fffffff]
[    0.505292] NetLabel: Initializing
[    0.508035] NetLabel:  domain hash size = 128
[    0.512033] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.516058] NetLabel:  unlabeled traffic allowed by default
[    0.539241] AppArmor: AppArmor Filesystem Enabled
[    0.540091] pnp: PnP ACPI init
[    0.544077] ACPI: bus type pnp registered
[    0.553865] pnp 00:00: >[bus 00-06]
[    0.553873] pnp 00:00: >[io  0x03b0-0x03df window]
[    0.553878] pnp 00:00: >[io  0x0d00-0x3fff window]
[    0.553884] pnp 00:00: >[mem 0xc0000000-0xd7ffffff window]
[    0.553889] pnp 00:00: >[mem 0xe0000000-0xf02fffff window]
[    0.553894] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
[    0.553899] pnp 00:00: >[io  0x0cf8-0x0cff]
[    0.553905] pnp 00:00: >[io  0x0000-0x0cf7 window]
[    0.553961] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.554025] pnp 00:01: >[io  0x0060]
[    0.554030] pnp 00:01: >[io  0x0064]
[    0.554050] pnp 00:01: >[irq 1]
[    0.554100] pnp 00:01: >Plug and Play ACPI device, IDs PNP0303 (active)
[    0.554152] pnp 00:02: >[irq 12]
[    0.554195] pnp 00:02: >Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.554240] pnp 00:03: >[io  0x03f2-0x03f5]
[    0.554246] pnp 00:03: >[io  0x03f7]
[    0.554256] pnp 00:03: >[irq 6]
[    0.554261] pnp 00:03: >[dma 2]
[    0.554310] pnp 00:03: >Plug and Play ACPI device, IDs PNP0700 (active)
[    0.554333] pnp 00:04: >[mem 0xfec00000-0xfec000ff]
[    0.554338] pnp 00:04: >[mem 0xff000000-0xffffffff]
[    0.554348] pnp 00:04: >[mem 0xfecc0000-0xfecc00ff]
[    0.554353] pnp 00:04: >[mem 0xe0000000-0xefffffff]
[    0.554358] pnp 00:04: >[io  0x0500-0x057f]
[    0.554363] pnp 00:04: >[io  0x04d0-0x04d1]
[    0.554368] pnp 00:04: >[io  0x0400-0x040f]
[    0.554479] system 00:04: >[io  0x0500-0x057f] has been reserved
[    0.556041] system 00:04: >[io  0x04d0-0x04d1] has been reserved
[    0.560040] system 00:04: >[io  0x0400-0x040f] has been reserved
[    0.564042] system 00:04: >[mem 0xfec00000-0xfec000ff] could not be reserved
[    0.568041] system 00:04: >[mem 0xff000000-0xffffffff] has been reserved
[    0.572041] system 00:04: >[mem 0xfecc0000-0xfecc00ff] could not be reserved
[    0.576041] system 00:04: >[mem 0xe0000000-0xefffffff] has been reserved
[    0.580043] system 00:04: >Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.580052] pnp: PnP ACPI: found 5 devices
[    0.584038] ACPI: ACPI bus type pnp unregistered
[    0.596457] Switching to clocksource acpi_pm
[    0.600139] pci 0000:00:03.0: >bridge window [io  0x1000-0x0fff] to [bus 03-03] add_size 1000
[    0.600148] pci 0000:00:03.0: >bridge window [mem 0x00100000-0x000fffff pref] to [bus 03-03] add_size 200000
[    0.600155] pci 0000:00:03.0: >bridge window [mem 0x00100000-0x000fffff] to [bus 03-03] add_size 200000
[    0.600164] pci 0000:00:03.1: >bridge window [io  0x1000-0x0fff] to [bus 04-04] add_size 1000
[    0.600171] pci 0000:00:03.1: >bridge window [mem 0x00100000-0x000fffff pref] to [bus 04-04] add_size 200000
[    0.600178] pci 0000:00:03.1: >bridge window [mem 0x00100000-0x000fffff] to [bus 04-04] add_size 200000
[    0.600188] pci 0000:00:03.2: >bridge window [mem 0x00100000-0x000fffff pref] to [bus 05-05] add_size 200000
[    0.600198] pci 0000:00:03.3: >bridge window [io  0x1000-0x0fff] to [bus 06-06] add_size 1000
[    0.600205] pci 0000:00:03.3: >bridge window [mem 0x00100000-0x000fffff pref] to [bus 06-06] add_size 200000
[    0.600212] pci 0000:00:03.3: >bridge window [mem 0x00100000-0x000fffff] to [bus 06-06] add_size 200000
[    0.600241] pci 0000:00:03.0: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.600247] pci 0000:00:03.0: >res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000
[    0.600254] pci 0000:00:03.1: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.600260] pci 0000:00:03.1: >res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000
[    0.600267] pci 0000:00:03.2: >res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000
[    0.600273] pci 0000:00:03.3: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.600279] pci 0000:00:03.3: >res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000
[    0.600285] pci 0000:00:03.0: >res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.600291] pci 0000:00:03.1: >res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.600297] pci 0000:00:03.3: >res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.600308] pci 0000:00:03.0: >BAR 14: can't assign mem (size 0x200000)
[    0.606930] pci 0000:00:03.0: >BAR 15: can't assign mem pref (size 0x200000)
[    0.613985] pci 0000:00:03.1: >BAR 14: can't assign mem (size 0x200000)
[    0.620603] pci 0000:00:03.1: >BAR 15: can't assign mem pref (size 0x200000)
[    0.627659] pci 0000:00:03.2: >BAR 15: can't assign mem pref (size 0x200000)
[    0.634711] pci 0000:00:03.3: >BAR 14: can't assign mem (size 0x200000)
[    0.641334] pci 0000:00:03.3: >BAR 15: can't assign mem pref (size 0x200000)
[    0.648391] pci 0000:00:03.0: >BAR 13: can't assign io (size 0x1000)
[    0.654751] pci 0000:00:03.1: >BAR 13: can't assign io (size 0x1000)
[    0.661112] pci 0000:00:03.3: >BAR 13: can't assign io (size 0x1000)
[    0.667477] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[    0.672803] pci 0000:00:02.0: >PCI bridge to [bus 02-02]
[    0.678123] pci 0000:00:02.0: >  bridge window [io  0x1000-0x1fff]
[    0.684313] pci 0000:00:02.0: >  bridge window [mem 0xf0000000-0xf00fffff]
[    0.691193] pci 0000:00:02.0: >  bridge window [mem 0xd0000000-0xd7ffffff pref]
[    0.698510] pci 0000:00:03.0: >PCI bridge to [bus 03-03]
[    0.703838] pci 0000:00:03.1: >PCI bridge to [bus 04-04]
[    0.709168] pci 0000:00:03.2: >PCI bridge to [bus 05-05]
[    0.714487] pci 0000:00:03.2: >  bridge window [io  0x2000-0x2fff]
[    0.720679] pci 0000:00:03.2: >  bridge window [mem 0xf0100000-0xf01fffff]
[    0.727563] pci 0000:00:03.3: >PCI bridge to [bus 06-06]
[    0.732897] pci 0000:00:01.0: >setting latency timer to 64
[    0.732986] pci_bus 0000:00: >resource 4 [io  0x0000-0x0cf7]
[    0.732991] pci_bus 0000:00: >resource 5 [io  0x0d00-0x3fff]
[    0.732997] pci_bus 0000:00: >resource 6 [mem 0xc0000000-0xd7ffffff]
[    0.733002] pci_bus 0000:00: >resource 7 [mem 0xe0000000-0xf02fffff]
[    0.733008] pci_bus 0000:00: >resource 8 [mem 0x000a0000-0x000bffff]
[    0.733014] pci_bus 0000:02: >resource 0 [io  0x1000-0x1fff]
[    0.733020] pci_bus 0000:02: >resource 1 [mem 0xf0000000-0xf00fffff]
[    0.733025] pci_bus 0000:02: >resource 2 [mem 0xd0000000-0xd7ffffff pref]
[    0.733031] pci_bus 0000:05: >resource 0 [io  0x2000-0x2fff]
[    0.733037] pci_bus 0000:05: >resource 1 [mem 0xf0100000-0xf01fffff]
[    0.733115] NET: Registered protocol family 2
[    0.737583] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.744823] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    0.752298] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.759115] TCP: Hash tables configured (established 16384 bind 16384)
[    0.765645] TCP: reno registered
[    0.768882] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.774730] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.781128] NET: Registered protocol family 1
[    0.785542] pci 0000:00:01.0: >disabling DAC on VIA PCI bridge
[    0.791383] pci 0000:00:02.0: >MSI quirk detected; subordinate MSI disabled
[    0.798560] pci 0000:02:00.0: >Boot video device
[    0.798575] PCI: CLS 64 bytes, default 64
[    0.798733] agpgart-amd64 0000:00:00.0: >AGP bridge [1106/0238]
[    0.804666] agpgart-amd64 0000:00:00.0: >aperture from AGP @ c0000000 size 256 MB
[    0.812252] Trying to unpack rootfs image as initramfs...
[    0.848308] agpgart-amd64 0000:00:00.0: >AGP aperture is 256M @ 0xc0000000
[    0.855372] platform rtc_cmos: >registered platform RTC device (no PNP device found)
[    0.872643] audit: initializing netlink socket (disabled)
[    0.884086] type=2000 audit(0.880:1): initialized
[    1.001238] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.019648] VFS: Disk quotas dquot_6.5.2
[    1.028625] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.048299] fuse init (API version 7.19)
[    1.052430] msgmni has been set to 946
[    1.072398] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.088110] io scheduler noop registered
[    1.092062] io scheduler deadline registered (default)
[    1.104370] io scheduler cfq registered
[    1.113167] ioapic: probe of 0000:00:00.5 failed with error -22
[    1.124626] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.136426] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.148367] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.164413] ACPI: Power Button [PWRF]
[    1.173200] GHES: HEST is not enabled!
[    1.180487] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.216478] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.250590] Linux agpgart interface v0.103
[    1.268940] brd: module loaded
[    1.273575] loop: module loaded
[    1.281220] Fixed MDIO Bus: probed
[    1.288637] tun: Universal TUN/TAP device driver, 1.6
[    1.293702] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.312150] PPP generic driver version 2.4.2
[    1.320639] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.336211] ehci_hcd 0000:00:10.4: >EHCI Host Controller
[    1.341561] ehci_hcd 0000:00:10.4: >new USB bus registered, assigned bus number 1
[    1.356531] ehci_hcd 0000:00:10.4: >irq 21, io mem 0xf0200000
[    1.380278] ehci_hcd 0000:00:10.4: >USB 2.0 started, EHCI 1.00
[    1.392315] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[    1.399205] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.406522] usb usb1: >Product: EHCI Host Controller
[    1.411495] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[    1.417859] usb usb1: >SerialNumber: 0000:00:10.4
[    1.452393] hub 1-0:1.0: >USB hub found
[    1.460245] hub 1-0:1.0: >8 ports detected
[    1.468609] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.480265] uhci_hcd: USB Universal Host Controller Interface driver
[    1.492484] uhci_hcd 0000:00:10.0: >UHCI Host Controller
[    1.497829] uhci_hcd 0000:00:10.0: >new USB bus registered, assigned bus number 2
[    1.512185] uhci_hcd 0000:00:10.0: >irq 21, io base 0x00003c00
[    1.524153] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
[    1.531041] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.538350] usb usb2: >Product: UHCI Host Controller
[    1.543324] usb usb2: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    1.549687] usb usb2: >SerialNumber: 0000:00:10.0
[    1.588666] hub 2-0:1.0: >USB hub found
[    1.596427] hub 2-0:1.0: >2 ports detected
[    1.604275] uhci_hcd 0000:00:10.1: >UHCI Host Controller
[    1.616273] uhci_hcd 0000:00:10.1: >new USB bus registered, assigned bus number 3
[    1.628160] uhci_hcd 0000:00:10.1: >irq 21, io base 0x00003c20
[    1.640389] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
[    1.647282] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.654595] usb usb3: >Product: UHCI Host Controller
[    1.659569] usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    1.665934] usb usb3: >SerialNumber: 0000:00:10.1
[    1.700301] hub 3-0:1.0: >USB hub found
[    1.708150] hub 3-0:1.0: >2 ports detected
[    1.716414] uhci_hcd 0000:00:10.2: >UHCI Host Controller
[    1.728064] uhci_hcd 0000:00:10.2: >new USB bus registered, assigned bus number 4
[    1.744288] uhci_hcd 0000:00:10.2: >irq 21, io base 0x00003c40
[    1.756150] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
[    1.763040] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.770357] usb usb4: >Product: UHCI Host Controller
[    1.775331] usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    1.781695] usb usb4: >SerialNumber: 0000:00:10.2
[    1.816658] hub 4-0:1.0: >USB hub found
[    1.824032] hub 4-0:1.0: >2 ports detected
[    1.832347] uhci_hcd 0000:00:10.3: >UHCI Host Controller
[    1.844517] uhci_hcd 0000:00:10.3: >new USB bus registered, assigned bus number 5
[    1.860415] uhci_hcd 0000:00:10.3: >irq 21, io base 0x00003c60
[    1.872327] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
[    1.879220] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.886534] usb usb5: >Product: UHCI Host Controller
[    1.891529] usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    1.897890] usb usb5: >SerialNumber: 0000:00:10.3
[    1.932331] hub 5-0:1.0: >USB hub found
[    1.940291] hub 5-0:1.0: >2 ports detected
[    1.948398] usbcore: registered new interface driver libusual
[    1.954185] Refined TSC clocksource calibration: 1000.035 MHz.
[    1.964424] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.972469] Switching to clocksource tsc
[    1.984628] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.996044] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.001342] mousedev: PS/2 mouse device common for all mice
[    2.012626] rtc_cmos rtc_cmos: >RTC can wake from S4
[    2.020650] rtc_cmos rtc_cmos: >rtc core: registered rtc_cmos as rtc0
[    2.035226] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    2.044817] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    2.056431] device-mapper: uevent: version 1.0.3
[    2.067404] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    2.084036] cpuidle: using governor ladder
[    2.092406] cpuidle: using governor menu
[    2.096342] EFI Variables Facility v0.08 2004-May-17
[    2.112515] ashmem: initialized
[    2.120666] TCP: cubic registered
[    2.124256] NET: Registered protocol family 10
[    2.136578] NET: Registered protocol family 17
[    2.148116] Key type dns_resolver registered
[    2.152684] PM: Hibernation image not present or could not be loaded.
[    2.152709] registered taskstats version 1
[    2.174802] Freeing initrd memory: 14876k freed
[    2.197142] Key type trusted registered
[    2.205383] Key type encrypted registered
[    2.214347]   Magic number: 14:594:48
[    2.218212] rtc_cmos rtc_cmos: >setting system clock to 2014-01-03 23:01:26 UTC (1388790086)
[    2.226733] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ (1 cpu cores) (version 2.20.00)
[    2.235782] powernow-k8: fid 0xa (1800 MHz), vid 0x4
[    2.240759] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[    2.245852] Marking TSC unstable due to cpufreq changes
[    2.251735] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.262576] EDD information not available.
[    2.269958] Switching to clocksource acpi_pm
[    2.279922] Freeing unused kernel memory: 928k freed
[    2.285558] Write protecting the kernel read-only data: 12288k
[    2.297890] Freeing unused kernel memory: 1472k freed
[    2.308953] Freeing unused kernel memory: 1124k freed
[    2.342547] udevd[83]: starting version 175
[    2.478167] sky2: driver version 1.30
[    2.495680] pata_via 0000:00:0f.1: >version 0.3.4
[    2.498165] Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?)
[    2.506465] scsi0 : pata_via
[    2.509489] scsi1 : pata_via
[    2.512431] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3c90 irq 14
[    2.519392] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3c98 irq 15
[    2.551152] sata_via 0000:00:0f.0: >version 2.6
[    2.551209] sata_via 0000:00:0f.0: >routed to hard irq line 0
[    2.562040] sky2 0000:05:00.0: >PCI: Disallowing DAC for device
[    2.568035] scsi2 : sata_via
[    2.573610] scsi3 : sata_via
[    2.578052] sky2 0000:05:00.0: >Yukon-2 EC chip revision 2
[    2.585089] ata3: SATA max UDMA/133 cmd 0x3ca0 ctl 0x3cb0 bmdma 0x3c80 irq 20
[    2.592246] ata4: SATA max UDMA/133 cmd 0x3ca8 ctl 0x3cb4 bmdma 0x3c88 irq 20
[    2.603543] sky2 0000:05:00.0: >eth0: addr 00:13:d4:76:a2:ac
[    2.640021] FDC 0 is a post-1991 82077
[    2.800022] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.968892] ata3.00: ATA-8: WDC WD1600AAJS-00B4A0, 01.03A01, max UDMA/133
[    2.975682] ata3.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 0/32)
[    2.988885] ata3.00: configured for UDMA/133
[    2.993292] scsi 2:0:0:0: >Direct-Access     ATA      WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5
[    3.001730] sd 2:0:0:0: >[sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    3.009449] sd 2:0:0:0: >Attached scsi generic sg0 type 0
[    3.014896] sd 2:0:0:0: >[sda] Write Protect is off
[    3.019780] sd 2:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[    3.019925] sd 2:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.086110]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    3.091651] sd 2:0:0:0: >[sda] Attached SCSI disk
[    3.220018] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    3.830968] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
[    3.837858] EXT4-fs (sda7): write access will be enabled during recovery
[    4.365315] EXT4-fs (sda7): recovery complete
[    4.372548] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   12.240176] Adding 979928k swap on /dev/sda6.  Priority:-1 extents:1 across:979928k 
[   12.592246] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.679697] udevd[302]: starting version 175
[   12.735695] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[   13.026791] lp: driver loaded but no devices found
[   14.231949] ppdev: user-space parallel port driver
[   14.263571] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
[   14.264188] parport0: irq 7 detected
[   14.266065] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.330506] Bluetooth: Core ver 2.16
[   14.330600] NET: Registered protocol family 31
[   14.330603] Bluetooth: HCI device and connection manager initialized
[   14.330606] Bluetooth: HCI socket layer initialized
[   14.330608] Bluetooth: L2CAP socket layer initialized
[   14.330614] Bluetooth: SCO socket layer initialized
[   14.360228] lp0: using parport0 (polling).
[   14.391291] Bluetooth: RFCOMM TTY layer initialized
[   14.391301] Bluetooth: RFCOMM socket layer initialized
[   14.391304] Bluetooth: RFCOMM ver 1.11
[   14.412359] [drm] Initialized drm 1.1.0 20060810
[   14.460751] MCE: In-kernel MCE decoding enabled.
[   14.485020] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.485025] Bluetooth: BNEP filters: protocol multicast
[   14.518586] EDAC MC: Ver: 2.1.0
[   14.568955] AMD64 EDAC driver v3.4.0
[   14.569009] EDAC amd64: DRAM ECC disabled.
[   14.569013] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   14.569013]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   14.569013]  (Note that use of the override may cause unknown side effects.)
[   14.625135] microcode: AMD CPU family 0xf not supported
[   15.048749] [drm] radeon defaulting to kernel modesetting.
[   15.048756] [drm] radeon kernel modesetting enabled.
[   15.049235] [drm] initializing kernel modesetting (RV380 0x1002:0x5B60 0x1043:0x0083).
[   15.049242] radeon 0000:02:00.0: >PCI: Disallowing DAC for device
[   15.049244] radeon: No suitable DMA available.
[   15.049260] [drm] register mmio base: 0xF0020000
[   15.049262] [drm] register mmio size: 65536
[   15.049391] [drm] Generation 2 PCI interface, using max accessible memory
[   15.049398] radeon 0000:02:00.0: >VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used)
[   15.049402] radeon 0000:02:00.0: >GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[   15.049419] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   15.049421] [drm] Driver supports precise vblank timestamp query.
[   15.049454] [drm] radeon: irq initialized.
[   15.049733] [drm] Detected VRAM RAM=128M, BAR=128M
[   15.049738] [drm] RAM width 64bits DDR
[   15.049921] [TTM] Zone  kernel: Available graphics memory: 251566 kiB
[   15.049923] [TTM] Initializing pool allocator
[   15.049930] [TTM] Initializing DMA pool allocator
[   15.049970] [drm] radeon: 128M of VRAM memory ready
[   15.049972] [drm] radeon: 512M of GTT memory ready.
[   15.049998] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   15.054456] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[   15.055588] [drm] PCIE GART of 512M enabled (table at 0x00000000D0040000).
[   15.055621] radeon 0000:02:00.0: >WB enabled
[   15.055626] radeon 0000:02:00.0: >fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff88000d9c5000
[   15.057795] [drm] Loading R300 Microcode
[   15.268261] [drm] radeon: ring at 0x00000000B0001000
[   15.268288] [drm] ring test succeeded in 1 usecs
[   15.268522] [drm] ib test succeeded in 0 usecs
[   15.268771] [drm] Radeon Display Connectors
[   15.268774] [drm] Connector 0:
[   15.268775] [drm]   VGA-1
[   15.268778] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   15.268780] [drm]   Encoders:
[   15.268781] [drm]     CRT1: INTERNAL_DAC1
[   15.268783] [drm] Connector 1:
[   15.268785] [drm]   DVI-I-1
[   15.268786] [drm]   HPD1
[   15.268789] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   15.268790] [drm]   Encoders:
[   15.268791] [drm]     CRT2: INTERNAL_DAC2
[   15.268793] [drm]     DFP1: INTERNAL_TMDS1
[   15.268794] [drm] Connector 2:
[   15.268796] [drm]   SVIDEO-1
[   15.268797] [drm]   Encoders:
[   15.268799] [drm]     TV1: INTERNAL_DAC2
[   15.333943] [drm] fb mappable at 0xD00C0000
[   15.333948] [drm] vram apper at 0xD0000000
[   15.333950] [drm] size 5242880
[   15.333952] [drm] fb depth is 24
[   15.333953] [drm]    pitch is 5120
[   15.334200] fbcon: radeondrmfb (fb0) is primary device
[   15.398619] Console: switching to colour frame buffer device 160x64
[   15.405947] fb0: radeondrmfb frame buffer device
[   15.405950] drm: registered panic notifier
[   15.410093] [drm] Initialized radeon 2.18.0 20080528 for 0000:02:00.0 on minor 0
[   15.494217] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input2
[   15.633893] init: plymouth main process (220) killed by ABRT signal
[   15.634383] init: plymouth-splash main process (635) terminated with status 2
[   15.714145] init: failsafe main process (533) killed by TERM signal
[   16.280030] snd_via82xx_modem 0000:00:11.6: >setting latency timer to 64
[   16.784263] snd_via82xx_modem: probe of 0000:00:11.6 failed with error -13
[   16.786051] snd_via82xx 0000:00:11.5: >setting latency timer to 64
[   16.910618] sky2 0000:05:00.0: >eth3: enabling interface
[   16.910745] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[   16.911346] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[   19.951465] sky2 0000:05:00.0: >eth3: Link is up at 1000 Mbps, full duplex, flow control both
[   19.951521] IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[   22.255779] init: plymouth-stop pre-start process (1402) terminated with status 1
[   32.040079] end_request: I/O error, dev fd1, sector 0
[   32.732078] end_request: I/O error, dev fd0, sector 0
[   38.760081] end_request: I/O error, dev fd1, sector 0
[   44.792075] end_request: I/O error, dev fd0, sector 0