[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13-1-grml-amd64 (team@grml.org) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Debian 3.13.6-1+grml.1 (2014-03-10)
[    0.000000] Command line: initrd=/boot/grml64small/initrd.img boot=live apm=power-off vga=791 nomce boot=live live-media-path=/live/grml64-small/ boot=live bootid=50cb75e9-61d3-4cda-9c64-fba7e464746e ssh=remote verbose console=ttyS0,115200n8 BOOT_IMAGE=/boot/grml64small/vmlinuz 
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7c64fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c7c65000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: AMD Persimmon/Persimmon, BIOS 4.1-858-gc19f876 10/27/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x19f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF8000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 base 0FF800000 mask FFF800000 write-protect
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000019f000000 aka 6640M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xc7c65 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1540-0x000f154f] mapped at [ffff8800000f1540]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE
[    0.000000] BRK [0x01aa1000, 0x01aa1fff] PGTABLE
[    0.000000] BRK [0x01aa2000, 0x01aa2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x19ee00000-0x19effffff]
[    0.000000]  [mem 0x19ee00000-0x19effffff] page 2M
[    0.000000] BRK [0x01aa3000, 0x01aa3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x19c000000-0x19edfffff]
[    0.000000]  [mem 0x19c000000-0x19edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x180000000-0x19bffffff]
[    0.000000]  [mem 0x180000000-0x19bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xc7c64fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xc7bfffff] page 2M
[    0.000000]  [mem 0xc7c00000-0xc7c64fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[    0.000000]  [mem 0x100000000-0x17fffffff] page 1G
[    0.000000] RAMDISK: [mem 0x7efcc000-0x7fffefff]
[    0.000000] ACPI: RSDP 00000000000f1710 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 00000000c7c800e0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 00000000c7c829e0 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 00000000c7c80280 00275E (v02 AMD    COREBOOT 00010001 INTL 20150619)
[    0.000000] ACPI: FACS 00000000c7c80240 000040
[    0.000000] ACPI: SSDT 00000000c7c82ae0 000045 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 00000000c7c82b30 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 00000000c7c82b70 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HEST 00000000c7c82bd0 000198 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 00000000c7c82d70 00168E (v02    AMD     ALIB 00000001 MSFT 04000000)
[    0.000000] ACPI: SSDT 00000000c7c84400 0003DE (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: HPET 00000000c7c847e0 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000019effffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x19effffff]
[    0.000000]   NODE_DATA [mem 0x19eff9000-0x19effdfff]
[    0.000000]  [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff880198c00000-ffff88019dbfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x19effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xc7c64fff]
[    0.000000]   node   0: [mem 0x100000000-0x19effffff]
[    0.000000] On node 0 totalpages: 1469443
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11132 pages used for memmap
[    0.000000]   DMA32 zone: 814181 pages, LIFO batch:31
[    0.000000]   Normal zone: 8904 pages used for memmap
[    0.000000]   Normal zone: 651264 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7c65000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88019ec00000 s85824 r8192 d20672 u1048576
[    0.000000] pcpu-alloc: s85824 r8192 d20672 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1449330
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: initrd=/boot/grml64small/initrd.img boot=live apm=power-off vga=791 nomce boot=live live-media-path=/live/grml64-small/ boot=live bootid=50cb75e9-61d3-4cda-9c64-fba7e464746e ssh=remote verbose console=ttyS0,115200n8 BOOT_IMAGE=/boot/grml64small/vmlinuz 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 5701724K/5877772K available (4965K kernel code, 697K rwdata, 1716K rodata, 1004K init, 952K bss, 176048K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1600.153 MHz processor
[    0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.30 BogoMIPS (lpj=6400612)
[    0.010621] pid_max: default: 32768 minimum: 301
[    0.015295] Security Framework initialized
[    0.019399] AppArmor: AppArmor disabled by boot time parameter
[    0.025229] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.032776] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.046348] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.056495] Mount-cache hash table entries: 256
[    0.061451] Initializing cgroup subsys memory
[    0.065828] Initializing cgroup subsys devices
[    0.070271] Initializing cgroup subsys freezer
[    0.074712] Initializing cgroup subsys blkio
[    0.078979] Initializing cgroup subsys perf_event
[    0.083730] tseg: 0000000000
[    0.083742] CPU: Physical Processor ID: 0
[    0.087765] CPU: Processor Core ID: 0
[    0.091429] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.091429] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.091429] tlb_flushall_shift: 5
[    0.105829] Freeing SMP alternatives memory: 20K (ffffffff819ab000 - ffffffff819b0000)
[    0.116213] ACPI: Core revision 20131115
[    0.123960] ACPI: All ACPI Tables successfully acquired
[    0.129717] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.175252] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.181074] ...trying to set up timer (IRQ0) through the 8259A ...
[    0.187239] ..... (found apic 0 pin 0) ...
[    0.231072] ....... failed.
[    0.233857] ...trying to set up timer as Virtual Wire IRQ...
[    0.279197] ..... works.
[    0.281771] smpboot: CPU0: AMD G-T56N Processor (fam: 14, model: 01, stepping: 00)
[    0.396405] Performance Events: AMD PMU driver.
[    0.400950] ... version:                0
[    0.404954] ... bit width:              48
[    0.409044] ... generic registers:      4
[    0.413048] ... value mask:             0000ffffffffffff
[    0.418351] ... max period:             00007fffffffffff
[    0.423657] ... fixed-purpose events:   0
[    0.427660] ... event mask:             000000000000000f
[    0.433471] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.441713] x86: Booting SMP configuration:
[    0.445940] .... node  #0, CPUs:      #1
[    0.462831] x86: Booted up 1 node, 2 CPUs
[    0.467024] smpboot: Total of 2 processors activated (6400.61 BogoMIPS)
[    0.474417] devtmpfs: initialized
[    0.485702] NET: Registered protocol family 16
[    0.490400] cpuidle: using governor ladder
[    0.494509] cpuidle: using governor menu
[    0.498593] ACPI: bus type PCI registered
[    0.502613] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.509280] PCI: Using configuration type 1 for base access
[    0.514844] PCI: Using configuration type 1 for extended access
[    0.522217] bio: create slab <bio-0> at 0
[    0.526541] ACPI: Added _OSI(Module Device)
[    0.530768] ACPI: Added _OSI(Processor Device)
[    0.535206] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.539904] ACPI: Added _OSI(Processor Aggregator Device)
[    0.547382] ACPI: Executed 2 blocks of module-level executable AML code
[    0.558182] ACPI: Interpreter enabled
[    0.561905] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.571159] ACPI: (supports S0 S1 S3 S4 S5)
[    0.575339] ACPI: Using IOAPIC for interrupt routing
[    0.580327] HEST: Table parsing has been initialized.
[    0.585377] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.594662] ACPI: No dock devices found.
[    0.617190] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.623429] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.631744] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.640378] PCI host bridge to bus 0000:00
[    0.644475] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.649954] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.656124] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.662295] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.669160] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[    0.676034] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[    0.676222] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[    0.676238] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.676249] pci 0000:00:01.0: reg 0x14: [io  0x2000-0x20ff]
[    0.676259] pci 0000:00:01.0: reg 0x18: [mem 0xf0200000-0xf023ffff]
[    0.676321] pci 0000:00:01.0: supports D1 D2
[    0.676423] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.682170] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[    0.682248] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.682351] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.688100] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[    0.688125] pci 0000:00:11.0: reg 0x10: [io  0x2410-0x2417]
[    0.688138] pci 0000:00:11.0: reg 0x14: [io  0x2420-0x2423]
[    0.688151] pci 0000:00:11.0: reg 0x18: [io  0x2418-0x241f]
[    0.688164] pci 0000:00:11.0: reg 0x1c: [io  0x2424-0x2427]
[    0.688177] pci 0000:00:11.0: reg 0x20: [io  0x2400-0x240f]
[    0.688190] pci 0000:00:11.0: reg 0x24: [mem 0xf0246000-0xf02463ff]
[    0.688216] pci 0000:00:11.0: set SATA to AHCI mode
[    0.693263] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.693282] pci 0000:00:12.0: reg 0x10: [mem 0xf0244000-0xf0244fff]
[    0.693434] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.699184] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.699210] pci 0000:00:12.2: reg 0x10: [mem 0xf0247000-0xf02470ff]
[    0.699309] pci 0000:00:12.2: supports D1 D2
[    0.699313] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.699407] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.705158] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.705177] pci 0000:00:13.0: reg 0x10: [mem 0xf0245000-0xf0245fff]
[    0.705329] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.711062] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.711087] pci 0000:00:13.2: reg 0x10: [mem 0xf0248000-0xf02480ff]
[    0.711186] pci 0000:00:13.2: supports D1 D2
[    0.711190] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.711286] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.717033] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.717261] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.717290] pci 0000:00:14.2: reg 0x10: [mem 0xf0240000-0xf0243fff 64bit]
[    0.717370] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.717540] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.717762] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.717892] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.723641] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[    0.723802] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[    0.723957] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[    0.724114] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[    0.724289] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[    0.724450] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[    0.724606] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[    0.724760] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[    0.725031] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.725052] pci 0000:01:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.725082] pci 0000:01:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.725102] pci 0000:01:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.725116] pci 0000:01:00.0: reg 0x30: [mem 0xf0100000-0xf011ffff pref]
[    0.725182] pci 0000:01:00.0: supports D1 D2
[    0.725186] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.732578] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.737608] pci 0000:00:04.0:   bridge window [io  0x1000-0x1fff]
[    0.737615] pci 0000:00:04.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.737624] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.737805] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[    0.744597] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.744601] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.744606] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.744610] pci 0000:00:14.4:   bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[    0.745136] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 *10 11 12 15)
[    0.751990] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 *11 12 15)
[    0.758833] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 *10 11 12 15)
[    0.765675] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 *11 12 15)
[    0.772515] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 *10 11 12 15)
[    0.779351] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *11
[    0.784810] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 *10 11 12 15)
[    0.791646] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 *11 12 15)
[    0.798655] ACPI: Enabled 6 GPEs in block 00 to 1F
[    0.803478] ACPI: \_SB_.PCI0: notify handler is installed
[    0.803523] Found 1 acpi root devices
[    0.803879] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.812036] vgaarb: loaded
[    0.814741] vgaarb: bridge control possible 0000:00:01.0
[    0.820165] PCI: Using ACPI for IRQ routing
[    0.824361] PCI: pci_cache_line_size set to 64 bytes
[    0.824433] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.824438] e820: reserve RAM buffer [mem 0xc7c65000-0xc7ffffff]
[    0.824441] e820: reserve RAM buffer [mem 0x19f000000-0x19fffffff]
[    0.824702] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.829629] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.837547] Switched to clocksource hpet
[    0.845487] pnp: PnP ACPI init
[    0.848613] ACPI: bus type PNP registered
[    0.852989] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.853048] pnp 00:01: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.853074] pnp 00:02: [dma 4]
[    0.853111] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.853183] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.853429] pnp: PnP ACPI: found 4 devices
[    0.857525] ACPI: bus type PNP unregistered
[    0.875083] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.880058] pci 0000:00:04.0:   bridge window [io  0x1000-0x1fff]
[    0.886149] pci 0000:00:04.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.892933] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.900674] pci 0000:00:14.4: PCI bridge to [bus 02]
[    0.905652] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.905656] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.905660] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.905664] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[    0.905668] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.905672] pci_bus 0000:01: resource 1 [mem 0xf0100000-0xf01fffff]
[    0.905676] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.905680] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.905684] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.905687] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.905691] pci_bus 0000:02: resource 7 [mem 0xe0000000-0xffffffff]
[    0.905812] NET: Registered protocol family 2
[    0.910587] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.918319] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.925761] TCP: Hash tables configured (established 65536 bind 65536)
[    0.932441] TCP: reno registered
[    0.935724] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.941927] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.948861] NET: Registered protocol family 1
[    0.953257] pci 0000:00:01.0: Boot video device
[    0.955045] PCI: CLS 64 bytes, default 64
[    0.955160] Unpacking initramfs...
[    4.476971] Freeing initrd memory: 16588K (ffff88007efcc000 - ffff88007ffff000)
[    4.484346] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    4.490785] software IO TLB [mem 0xc3c65000-0xc7c65000] (64MB) mapped at [ffff8800c3c65000-ffff8800c7c64fff]
[    4.500925] LVT offset 0 assigned for vector 0x400
[    4.505804] perf: AMD IBS detected (0x000000ff)
[    4.510468] microcode: CPU0: patch_level=0x05000029
[    4.515351] microcode: CPU1: patch_level=0x05000029
[    4.520399] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    4.529176] Scanning for low memory corruption every 60 seconds
[    4.535894] audit: initializing netlink socket (disabled)
[    4.541340] type=2000 audit(1445940381.236:1): initialized
[    4.571570] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    4.579678] VFS: Disk quotas dquot_6.5.2
[    4.583743] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    4.590340] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    4.596447] aufs 3.13-20140127
[    4.599510] msgmni has been set to 11168
[    4.604460] alg: No test for stdrng (krng)
[    4.608672] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    4.616182] io scheduler noop registered
[    4.620106] io scheduler deadline registered
[    4.624426] io scheduler cfq registered (default)
[    4.629524] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[    4.629688] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[    4.636648] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    4.643173] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[    4.643197] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.648797] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    4.655565] simple-framebuffer simple-framebuffer.0: framebuffer at 0xe0000000, 0x180000 bytes, mapped to 0xffffc90000e00000
[    4.666813] simple-framebuffer simple-framebuffer.0: format=r5g6b5, mode=1024x768x16, linelength=2048
[    4.678804] Console: switching to colour frame buffer device 128x48
[    4.687765] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    4.695060] GHES: Failed to enable APEI firmware first mode.
[    4.700996] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    4.727825] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    4.756303] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    4.784784] serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    4.813163] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
[    4.821436] Linux agpgart interface v0.103
[    4.825741] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    4.833131] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.838136] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.843801] mousedev: PS/2 mouse device common for all mice
[    4.849524] rtc_cmos 00:00: RTC can wake from S4
[    4.854414] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    4.860556] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[    4.867712] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    4.874173] AMD IOMMUv2 functionality not available on this system
[    4.880598] TCP: cubic registered
[    4.884069] NET: Registered protocol family 10
[    4.888950] mip6: Mobile IPv6
[    4.891970] NET: Registered protocol family 17
[    4.896415] mpls_gso: MPLS GSO support
[    4.900931] registered taskstats version 1
[    4.906337] rtc_cmos 00:00: setting system clock to 2015-10-27 10:06:22 UTC (1445940382)
[    4.914486] PM: Hibernation image not present or could not be loaded.
[    4.916543] Freeing unused kernel memory: 1004K (ffffffff818b0000 - ffffffff819ab000)
[    4.924447] Write protecting the kernel read-only data: 8192k
[    4.936620] Freeing unused kernel memory: 1168K (ffff8800014dc000 - ffff880001600000)
[    4.946415] Freeing unused kernel memory: 332K (ffff8800017ad000 - ffff880001800000)
[    4.998893] systemd-udevd[64]: starting version 204
[    5.040094] ACPI: bus type USB registered
[    5.055005] SCSI subsystem initialized
[    5.057654] usbcore: registered new interface driver usbfs
[    5.057681] usbcore: registered new interface driver hub
[    5.073299] usbcore: registered new device driver usb
[    5.078481] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    5.084904] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.085355] r8169 0000:01:00.0: irq 41 for MSI/MSI-X
[    5.085735] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xffffc90000c16000, 00:03:2d:19:6d:87, XID 081000c0 IRQ 41
[    5.085738] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    5.110626] ehci-pci: EHCI PCI platform driver
[    5.115162] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.121598] QUIRK: Enable AMD PLL fix
[    5.121636] ehci-pci 0000:00:12.2: EHCI Host Controller
[    5.127144] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    5.138236] ohci-pci: OHCI PCI platform driver
[    5.139329] [drm] Initialized drm 1.1.0 20060810
[    5.149901] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    5.158188] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    5.162175] thermal LNXTHERM:00: registered as thermal_zone0
[    5.162177] ACPI: Thermal Zone [TZ00] (53 C)
[    5.176833] ehci-pci 0000:00:12.2: debug port 1
[    5.177630] ACPI: Power Button [PWRB]
[    5.177771] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    5.177774] ACPI: Power Button [PWRF]
[    5.197125] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0247000
[    5.213686] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    5.230307] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.237131] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.244351] usb usb1: Product: EHCI Host Controller
[    5.249228] usb usb1: Manufacturer: Linux 3.13-1-grml-amd64 ehci_hcd
[    5.255576] usb usb1: SerialNumber: 0000:00:12.2
[    5.260266] libata version 3.00 loaded.
[    5.264415] [drm] radeon kernel modesetting enabled.
[    5.279247] hub 1-0:1.0: USB hub found
[    5.284483] hub 1-0:1.0: 5 ports detected
[    5.291278] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    5.297128] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 2
[    5.307901] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0244000
[    5.373863] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    5.380655] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.387874] usb usb2: Product: OHCI PCI host controller
[    5.393092] usb usb2: Manufacturer: Linux 3.13-1-grml-amd64 ohci_hcd
[    5.399442] usb usb2: SerialNumber: 0000:00:12.0
[    5.404486] hub 2-0:1.0: USB hub found
[    5.408277] hub 2-0:1.0: 5 ports detected
[    5.412804] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    5.418385] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 3
[    5.425802] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0245000
[    5.489848] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.496656] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.503873] usb usb3: Product: OHCI PCI host controller
[    5.505636] tsc: Refined TSC clocksource calibration: 1599.999 MHz
[    5.515270] usb usb3: Manufacturer: Linux 3.13-1-grml-amd64 ohci_hcd
[    5.521624] usb usb3: SerialNumber: 0000:00:13.0
[    5.526550] hub 3-0:1.0: USB hub found
[    5.530316] hub 3-0:1.0: 5 ports detected
[    5.534604] ahci 0000:00:11.0: version 3.0
[    5.535000] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    5.543104] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part 
[    5.552037] scsi0 : ahci
[    5.554792] scsi1 : ahci
[    5.557427] scsi2 : ahci
[    5.560076] scsi3 : ahci
[    5.562691] ata1: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246100 irq 19
[    5.570087] ata2: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246180 irq 19
[    5.577474] ata3: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246200 irq 19
[    5.584861] ata4: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246280 irq 19
[    5.592340] checking generic (e0000000 180000) vs hw (e0000000 10000000)
[    5.592343] fb: conflicting fb hw usage radeondrmfb vs simple - removing generic driver
[    5.600408] Console: switching to colour dummy device 80x25
[    5.605677] usb 1-2: new high-speed USB device number 2 using ehci-pci
[    5.613816] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
[    5.621721] [drm] register mmio base: 0xF0200000
[    5.626348] [drm] register mmio size: 262144
[    5.630694] ATOM BIOS: AMD
[    5.633481] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[    5.642190] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[    5.649840] [drm] Detected VRAM RAM=384M, BAR=256M
[    5.654627] [drm] RAM width 32bits DDR
[    5.658509] [TTM] Zone  kernel: Available graphics memory: 2860418 kiB
[    5.665042] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    5.671562] [TTM] Initializing pool allocator
[    5.675924] [TTM] Initializing DMA pool allocator
[    5.680661] [drm] radeon: 384M of VRAM memory ready
[    5.685552] [drm] radeon: 1024M of GTT memory ready.
[    5.690920] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    5.712830] [drm] Loading PALM Microcode
[    5.719592] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[    5.726834] radeon 0000:00:01.0: WB enabled
[    5.731033] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff88007ee26c00
[    5.741808] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff88007ee26c0c
[    5.746589] usb 1-2: New USB device found, idVendor=0457, idProduct=0151
[    5.746593] usb 1-2: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[    5.746596] usb 1-2: Product: USB Mass Storage Device
[    5.746598] usb 1-2: SerialNumber: 95b13507ca411e
[    5.776877] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001132118
[    5.787667] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.794291] [drm] Driver supports precise vblank timestamp query.
[    5.800421] radeon 0000:00:01.0: irq 42 for MSI/MSI-X
[    5.800446] radeon 0000:00:01.0: radeon: using MSI.
[    5.805378] [drm] radeon: irq initialized.
[    5.826635] [drm] ring test on 0 succeeded in 1 usecs
[    5.831794] [drm] ring test on 3 succeeded in 1 usecs
[    5.853700] usb 1-4: new high-speed USB device number 3 using ehci-pci
[    5.892578] [drm] ring test on 5 succeeded in 1 usecs
[    5.913667] ata1: SATA link down (SStatus 0 SControl 300)
[    5.917562] [drm] UVD initialized successfully.
[    5.918415] [drm] Enabling audio 0 support
[    5.918480] [drm] ib test on ring 0 succeeded in 0 usecs
[    5.918533] [drm] ib test on ring 3 succeeded in 0 usecs
[    5.937596] [drm] ib test on ring 5 succeeded
[    5.942694] ata3: SATA link down (SStatus 0 SControl 300)
[    5.948190] ata4: SATA link down (SStatus 0 SControl 300)
[    5.953634] ata2: SATA link down (SStatus 0 SControl 300)
[    5.957976] [drm] Radeon Display Connectors
[    5.957978] [drm] Connector 0:
[    5.957979] [drm]   DVI-D-1
[    5.957980] [drm]   HPD2
[    5.957983] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    5.957983] [drm]   Encoders:
[    5.957985] [drm]     DFP1: INTERNAL_UNIPHY
[    5.957986] [drm] Connector 1:
[    5.957987] [drm]   VGA-1
[    5.957989] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[    5.957990] [drm]   Encoders:
[    5.957991] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    5.958049] [drm] Internal thermal controller without fan control
[    5.958102] [drm] Found smc ucode version: 0x00010601
[    5.958328] [drm] radeon: dpm initialized
[    5.969995] radeon 0000:00:01.0: No connectors reported connected with modes
[    5.970004] [drm] Cannot find any crtc or sizes - going 1024x768
[    5.971425] [drm] fb mappable at 0xE0477000
[    5.971426] [drm] vram apper at 0xE0000000
[    5.971427] [drm] size 3145728
[    5.971428] [drm] fb depth is 24
[    5.971429] [drm]    pitch is 4096
[    6.052803] fbcon: radeondrmfb (fb0) is primary device
[    6.055038] Console: switching to colour frame buffer device 128x48
[    6.071447] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[    6.077887] radeon 0000:00:01.0: registered panic notifier
[    6.083412] [drm] Initialized radeon 2.36.0 20080528 for 0000:00:01.0 on minor 0
[    6.084805] usb 1-4: New USB device found, idVendor=0781, idProduct=5406
[    6.084810] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.084813] usb 1-4: Product: U3 Cruzer Micro
[    6.084815] usb 1-4: Manufacturer: SanDisk Corporation
[    6.084817] usb 1-4: SerialNumber: 000016215270D67E
[    6.182677] ehci-pci 0000:00:13.2: EHCI Host Controller
[    6.187942] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[    6.195351] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    6.204055] ehci-pci 0000:00:13.2: debug port 1
[    6.208636] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0248000
[    6.225809] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    6.231657] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    6.238457] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.245675] usb usb4: Product: EHCI Host Controller
[    6.250549] usb usb4: Manufacturer: Linux 3.13-1-grml-amd64 ehci_hcd
[    6.256896] usb usb4: SerialNumber: 0000:00:13.2
[    6.261860] hub 4-0:1.0: USB hub found
[    6.265627] hub 4-0:1.0: 5 ports detected
[    6.333965] hub 3-0:1.0: USB hub found
[    6.339933] hub 3-0:1.0: 5 ports detected
[    6.353351] usb-storage 1-2:1.0: USB Mass Storage device detected
[    6.359674] usb-storage 1-2:1.0: Quirks match for vid 0457 pid 0151: 80
[    6.366614] scsi4 : usb-storage 1-2:1.0
[    6.370944] usb-storage 1-4:1.0: USB Mass Storage device detected
[    6.377387] scsi5 : usb-storage 1-4:1.0
[    6.381407] usbcore: registered new interface driver usb-storage
[    6.409516] device-mapper: uevent: version 1.0.3
[    6.414465] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    6.502119] Switched to clocksource tsc
[    7.372684] scsi 4:0:0:0: Direct-Access     JetFlash TS4GJF2A/120     0.00 PQ: 0 ANSI: 2
[    7.382831] scsi 5:0:0:0: Direct-Access     SanDisk  U3 Cruzer Micro  3.21 PQ: 0 ANSI: 2
[    7.401918] sd 4:0:0:0: [sda] 8028160 512-byte logical blocks: (4.11 GB/3.82 GiB)
[    7.410283] sd 5:0:0:0: [sdb] 2006673 512-byte logical blocks: (1.02 GB/979 MiB)
[    7.414918] sd 4:0:0:0: [sda] Write Protect is off
[    7.414925] sd 4:0:0:0: [sda] Mode Sense: 00 00 00 00
[    7.415745] sd 4:0:0:0: [sda] Asking for cache data failed
[    7.415748] sd 4:0:0:0: [sda] Assuming drive cache: write through
[    7.419463] sd 4:0:0:0: [sda] Asking for cache data failed
[    7.419466] sd 4:0:0:0: [sda] Assuming drive cache: write through
[    7.420460]  sda: sda1
[    7.424297] sd 4:0:0:0: [sda] Asking for cache data failed
[    7.424300] sd 4:0:0:0: [sda] Assuming drive cache: write through
[    7.424306] sd 4:0:0:0: [sda] Attached SCSI removable disk
[    7.467086] sd 5:0:0:0: [sdb] Write Protect is off
[    7.472525] sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    7.476017] sd 5:0:0:0: [sdb] No Caching mode page found
[    7.482148] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[    7.492074] sd 5:0:0:0: [sdb] No Caching mode page found
[    7.497783] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[    7.513533]  sdb: sdb1
[    7.520596] sd 5:0:0:0: [sdb] No Caching mode page found
[    7.525983] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[    7.532100] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[    7.542306] sd 4:0:0:0: Attached scsi generic sg0 type 0
[    7.548344] sd 5:0:0:0: Attached scsi generic sg1 type 0
[    7.969861] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    8.223098] loop: module loaded
[    8.297910]  loop0: unknown partition table
[    8.988615] random: nonblocking pool is initialized
[   11.129872] pci_pm_runtime_suspend(): radeon_pmops_runtime_suspend+0x0/0x90 [radeon] returns -22
[   11.739088] FS-Cache: Loaded
[   11.769921] 9pnet: Installing 9P2000 support
[   11.801456] 9p: Installing v9fs 9p2000 file system support
[   11.807085] FS-Cache: Netfs '9p' registered for caching
[   15.900601] systemd-udevd[795]: starting version 204
[   16.055549] ACPI: acpi_idle registered with cpuidle
[   16.186836] acpi-cpufreq: overriding BIOS provided _PSD data
[   16.249630] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   16.257384] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8060
[   16.313959] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   16.533857] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   16.549899] sp5100_tco: PCI Revision ID: 0x42
[   16.557644] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[   16.563873] sp5100_tco: Last reboot was not triggered by watchdog.
[   16.592200] sp5100_tco: initialized (0xffffc90000de4b00). heartbeat=60 sec (nowayout=0)
[   16.881780] kvm: Nested Virtualization enabled
[   16.886296] kvm: Nested Paging enabled
[   16.953242] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input7
[   17.035767] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[   17.059498] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[   17.105784] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[   19.849849] RPC: Registered named UNIX socket transport module.
[   19.855805] RPC: Registered udp transport module.
[   19.860518] RPC: Registered tcp transport module.
[   19.865219] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   20.048399] FS-Cache: Netfs 'nfs' registered for caching
[   20.287067] r8169 0000:01:00.0 eth0: link down
[   20.291626] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.297517] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   20.297534] r8169 0000:01:00.0 eth0: link down
[   23.467719] r8169 0000:01:00.0 eth0: link up
[   23.467772] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   25.862700] fuse init (API version 7.22)
[   25.949115] ipmi message handler version 39.2
[   43.675193] r8169 0000:01:00.0 eth0: link down
[   43.675272] r8169 0000:01:00.0 eth0: link down
[   43.675301] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   46.217912] r8169 0000:01:00.0 eth0: link up
[   46.217942] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   73.279504] type=1006 audit(1445940438.992:2): pid=3106 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=1 res=1
[  100.759743] type=1006 audit(1445940466.472:3): pid=3113 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=2 res=1
[  109.926256] type=1006 audit(1445940475.640:4): pid=3118 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=3 res=1
[  110.069041] type=1006 audit(1445940475.780:5): pid=3123 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=4 res=1
[  110.215112] type=1006 audit(1445940475.928:6): pid=3128 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=5 res=1
[  110.345985] type=1006 audit(1445940476.060:7): pid=3133 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=6 res=1
[  235.782944] type=1006 audit(1445940601.496:8): pid=3155 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=7 res=1
[  235.920337] type=1006 audit(1445940601.632:9): pid=3160 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=8 res=1
[  236.057013] type=1006 audit(1445940601.768:10): pid=3165 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=9 res=1
[  236.196193] type=1006 audit(1445940601.908:11): pid=3170 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=10 res=1