[    0.265474] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.315885] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.316100] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    0.316259] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[    0.316700] PCI host bridge to bus 0000:00
[    0.316841] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.316907] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.316957] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.317007] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.317058] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xffffffff]
[    0.317126] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[    0.317664] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[    0.317687] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.317698] pci 0000:00:01.0: reg 0x14: [io  0x2000-0x20ff]
[    0.317708] pci 0000:00:01.0: reg 0x18: [mem 0xf0200000-0xf023ffff]
[    0.317776] pci 0000:00:01.0: supports D1 D2
[    0.317899] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.318448] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[    0.318544] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.318673] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.319203] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.319237] pci 0000:00:11.0: reg 0x10: [io  0x2410-0x2417]
[    0.319250] pci 0000:00:11.0: reg 0x14: [io  0x2420-0x2423]
[    0.319264] pci 0000:00:11.0: reg 0x18: [io  0x2418-0x241f]
[    0.319277] pci 0000:00:11.0: reg 0x1c: [io  0x2424-0x2427]
[    0.319290] pci 0000:00:11.0: reg 0x20: [io  0x2400-0x240f]
[    0.319303] pci 0000:00:11.0: reg 0x24: [mem 0xf0246000-0xf02463ff]
[    0.319867] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.319895] pci 0000:00:12.0: reg 0x10: [mem 0xf0244000-0xf0244fff]
[    0.320086] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.320513] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.320546] pci 0000:00:12.2: reg 0x10: [mem 0xf0246400-0xf02464ff]
[    0.320652] pci 0000:00:12.2: supports D1 D2
[    0.320656] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.320784] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.321270] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.321297] pci 0000:00:13.0: reg 0x10: [mem 0xf0245000-0xf0245fff]
[    0.321488] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.322008] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.322043] pci 0000:00:13.2: reg 0x10: [mem 0xf0246500-0xf02465ff]
[    0.322152] pci 0000:00:13.2: supports D1 D2
[    0.322156] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.322284] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.322752] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.323299] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.323336] pci 0000:00:14.2: reg 0x10: [mem 0xf0240000-0xf0243fff 64bit]
[    0.323426] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.323868] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.324409] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.324586] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.324935] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[    0.325473] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[    0.325930] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[    0.326321] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[    0.326695] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[    0.327290] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[    0.327571] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[    0.327896] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[    0.328588] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.328618] pci 0000:01:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.328649] pci 0000:01:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.328670] pci 0000:01:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.328684] pci 0000:01:00.0: reg 0x30: [mem 0xf0100000-0xf011ffff pref]
[    0.328760] pci 0000:01:00.0: supports D1 D2
[    0.328763] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.347007] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.347119] pci 0000:00:04.0:   bridge window [io  0x1000-0x1fff]
[    0.347125] pci 0000:00:04.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.347134] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.347656] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[    0.347727] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.347732] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.347736] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.347740] pci 0000:00:14.4:   bridge window [mem 0x7f000000-0xffffffff] (subtractive decode)
[    0.347765] pci_bus 0000:00: on NUMA node 0
[    0.348279] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.348870] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.349453] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.350035] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.350616] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.351196] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
[    0.351533] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.352113] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.353222] ACPI: Enabled 6 GPEs in block 00 to 1F
[    0.353365] ACPI: \_SB_.PCI0: notify handler is installed
[    0.353423] Found 1 acpi root devices
[    0.354757] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.354874] vgaarb: loaded
[    0.354918] vgaarb: bridge control possible 0000:00:01.0
[    0.355798] SCSI subsystem initialized
[    0.357212] PCI: Using ACPI for IRQ routing
[    0.357316] PCI: pci_cache_line_size set to 64 bytes
[    0.357389] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.357393] e820: reserve RAM buffer [mem 0x66150000-0x67ffffff]
[    0.358152] Switched to clocksource hpet
[    0.376974] pnp: PnP ACPI init
[    0.377065] ACPI: bus type PNP registered
[    0.377711] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.377899] pnp 00:01: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.377924] pnp 00:02: [dma 4]
[    0.378062] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.378348] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.378644] pnp: PnP ACPI: found 4 devices
[    0.378696] ACPI: bus type PNP unregistered
[    0.383840] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.383898] pci 0000:00:04.0:   bridge window [io  0x1000-0x1fff]
[    0.383951] pci 0000:00:04.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.384004] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.384061] pci 0000:00:14.4: PCI bridge to [bus 02]
[    0.384123] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.384126] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.384130] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.384134] pci_bus 0000:00: resource 7 [mem 0x7f000000-0xffffffff]
[    0.384138] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.384141] pci_bus 0000:01: resource 1 [mem 0xf0100000-0xf01fffff]
[    0.384145] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.384150] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.384153] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.384157] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.384161] pci_bus 0000:02: resource 7 [mem 0x7f000000-0xffffffff]
[    0.384321] NET: Registered protocol family 2
[    0.384788] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    0.384968] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.385184] TCP: Hash tables configured (established 16384 bind 16384)
[    0.385363] TCP: reno registered
[    0.385431] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.385511] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.385903] NET: Registered protocol family 1
[    0.385990] pci 0000:00:01.0: Boot video device
[    0.387516] PCI: CLS 64 bytes, default 64
[    0.387608] Trying to unpack rootfs image as initramfs...
[    1.183354] Freeing initrd memory: 3404K (ffff880037c9d000 - ffff880037ff0000)
[    1.183741] LVT offset 0 assigned for vector 0x400
[    1.183876] perf: AMD IBS detected (0x000000ff)
[    1.187232] audit: initializing netlink socket (disabled)
[    1.187307] type=2000 audit(1397676584.070:1): initialized
[    1.189626] VFS: Disk quotas dquot_6.5.2
[    1.189770] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.190156] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.190250] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    1.190997] OCFS2 1.5.0
[    1.191211] ocfs2: Registered cluster interface o2cb
[    1.191278] OCFS2 DLMFS 1.5.0
[    1.191539] OCFS2 User DLM kernel interface loaded
[    1.191612] OCFS2 Node Manager 1.5.0
[    1.192090] OCFS2 DLM 1.5.0
[    1.192823] GFS2 installed
[    1.195726] msgmni has been set to 3195
[    1.197231] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.197294] io scheduler noop registered
[    1.197340] io scheduler deadline registered
[    1.197414] io scheduler cfq registered (default)
[    1.197839] pcieport 0000:00:04.0: device [1022:1512] has invalid IRQ; check vendor BIOS
[    1.198326] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[    1.199196] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[    1.199271] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.199323] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[    1.199800] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.221021] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.242258] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.263533] serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    1.284750] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
[    1.285962] Linux agpgart interface v0.103
[    1.295800] brd: module loaded
[    1.300811] loop: module loaded
[    1.301739] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.302465] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.302533] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.303302] mousedev: PS/2 mouse device common for all mice
[    1.303941] hidraw: raw HID events driver (C) Jiri Kosina
[    1.305529] TCP: cubic registered
[    1.305598] NET: Registered protocol family 17
[    1.307822] registered taskstats version 1
[    1.308356] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.309144] Freeing unused kernel memory: 800K (ffffffff8167d000 - ffffffff81745000)
[    1.492434] libata version 3.00 loaded.
[    1.892510] ahci 0000:00:11.0: version 3.0
[    1.892944] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.892951] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part 
[    1.900953] scsi0 : ahci
[    1.901726] scsi1 : ahci
[    1.902227] scsi2 : ahci
[    1.902659] scsi3 : ahci
[    1.903078] scsi4 : ahci
[    1.903481] scsi5 : ahci
[    1.903873] ata1: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246100 irq 19
[    1.903879] ata2: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246180 irq 19
[    1.903883] ata3: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246200 irq 19
[    1.903887] ata4: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246280 irq 19
[    1.903891] ata5: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246300 irq 19
[    1.903895] ata6: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246380 irq 19
[    2.178406] tsc: Refined TSC clocksource calibration: 1599.999 MHz
[    2.248309] ata5: SATA link down (SStatus 0 SControl 300)
[    2.248382] ata3: SATA link down (SStatus 0 SControl 300)
[    2.248573] ata6: SATA link down (SStatus 0 SControl 300)
[    2.248682] ata4: SATA link down (SStatus 0 SControl 300)
[    2.448355] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.448414] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.449093] ata2.00: ATA-7: Kingston SSDNow V Series 64GB, B090522a, max UDMA/133
[    2.449105] ata2.00: 125045424 sectors, multi 1: LBA 
[    2.450153] ata2.00: configured for UDMA/133
[    2.452358] ata1.00: ATAPI: hp      DVDRAM GT30L, mP06, max UDMA/100
[    2.456366] ata1.00: configured for UDMA/100
[    2.459330] scsi 0:0:0:0: CD-ROM            hp       DVDRAM GT30L     mP06 PQ: 0 ANSI: 5
[    2.464483] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.464491] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.465715] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.466690] scsi 1:0:0:0: Direct-Access     ATA      Kingston SSDNow  B090 PQ: 0 ANSI: 5
[    2.468132] sd 1:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[    2.468356] sd 1:0:0:0: [sda] Write Protect is off
[    2.468362] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.468408] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.470227]  sda: sda1
[    2.471517] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.530459] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    2.530827] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.691615] scsi: <fdomain> Detection failed (no card)
[    2.724085] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    2.931628] imm: Version 2.05 (for Linux 2.4.0)
[    3.054213] Fusion MPT base driver 3.04.20
[    3.054218] Copyright (c) 1999-2008 LSI Corporation
[    3.067224] Fusion MPT SPI Host driver 3.04.20
[    3.078705] Fusion MPT FC Host driver 3.04.20
[    3.088999] Fusion MPT SAS Host driver 3.04.20
[    3.095636] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    3.102410] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    3.109513] Compaq SMART2 Driver (v 2.6.0)
[    3.154244] HP CISS Driver (v 3.6.26)
[    3.178381] Switched to clocksource tsc
[    3.188879] Adaptec aacraid driver 1.2-0[30200]-ms
[    3.201042] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    3.202479] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    3.213271] megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013
[    3.224089] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.08-k.
[    3.258024] Emulex LightPulse Fibre Channel SCSI driver 8.3.42
[    3.258030] Copyright(c) 2004-2013 Emulex.  All rights reserved.
[    3.272163] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    3.300240] ACPI: bus type USB registered
[    3.301192] usbcore: registered new interface driver usbfs
[    3.301442] usbcore: registered new interface driver hub
[    3.301728] usbcore: registered new device driver usb
[    3.302900] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.303485] ehci-pci: EHCI PCI platform driver
[    3.303926] ehci-pci 0000:00:12.2: EHCI Host Controller
[    3.303941] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    3.303953] QUIRK: Enable AMD PLL fix
[    3.303958] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.303987] ehci-pci 0000:00:12.2: debug port 1
[    3.304067] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0246400
[    3.318287] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    3.318537] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.318542] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.318546] usb usb1: Product: EHCI Host Controller
[    3.318550] usb usb1: Manufacturer: Linux 3.12.13-gentoo ehci_hcd
[    3.318553] usb usb1: SerialNumber: 0000:00:12.2
[    3.319534] hub 1-0:1.0: USB hub found
[    3.319597] hub 1-0:1.0: 5 ports detected
[    3.320498] ehci-pci 0000:00:13.2: EHCI Host Controller
[    3.320522] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    3.320532] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.320562] ehci-pci 0000:00:13.2: debug port 1
[    3.320626] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0246500
[    3.338373] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    3.338731] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.338738] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.338742] usb usb2: Product: EHCI Host Controller
[    3.338746] usb usb2: Manufacturer: Linux 3.12.13-gentoo ehci_hcd
[    3.338749] usb usb2: SerialNumber: 0000:00:13.2
[    3.339414] hub 2-0:1.0: USB hub found
[    3.339431] hub 2-0:1.0: 5 ports detected
[    3.394508] usbcore: registered new interface driver usb-storage
[    3.400680] uhci_hcd: USB Universal Host Controller Interface driver
[    3.407011] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.436237] usbcore: registered new interface driver usbhid
[    3.436242] usbhid: USB HID core driver
[    3.730091] device-mapper: uevent: version 1.0.3
[    3.730567] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[    3.805869] md: raid0 personality registered for level 0
[    3.812403] md: raid1 personality registered for level 1
[    3.988193] raid6: sse2x1    1139 MB/s
[    4.158164] raid6: sse2x2    1492 MB/s
[    4.328162] raid6: sse2x4    2215 MB/s
[    4.328165] raid6: using algorithm sse2x4 (2215 MB/s)
[    4.328168] raid6: using ssse3x2 recovery algorithm
[    4.329223] async_tx: api initialized (async)
[    4.330131] xor: measuring software checksum speed
[    4.428148]    prefetch64-sse:  3460.400 MB/sec
[    4.528143]    generic_sse:  3230.000 MB/sec
[    4.528145] xor: using function: prefetch64-sse (3460.400 MB/sec)
[    4.534825] md: raid6 personality registered for level 6
[    4.534831] md: raid5 personality registered for level 5
[    4.534833] md: raid4 personality registered for level 4
[    4.572082] md: raid10 personality registered for level 10
[    4.578132] md: linear personality registered for level -1
[    4.584552] md: multipath personality registered for level -4
[    4.665785] JFS: nTxBlock = 8192, nTxLock = 65536
[    4.684501] RPC: Registered named UNIX socket transport module.
[    4.684506] RPC: Registered udp transport module.
[    4.684508] RPC: Registered tcp transport module.
[    4.684510] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    4.728303] fuse init (API version 7.22)
[    4.738687] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    4.738693] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    4.748847] pps_core: LinuxPPS API ver. 1 registered
[    4.748854] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    4.750089] PTP clock support registered
[    4.764741] Loading iSCSI transport class v2.0-870.
[    4.898283] kjournald starting.  Commit interval 5 seconds
[    4.898347] EXT3-fs (sda1): mounted filesystem with ordered data mode
[    5.723174] systemd-udevd[2242]: starting version 208
[    5.864605] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[    5.864740] ACPI: Power Button [PWRB]
[    5.864892] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    5.865736] ACPI: Power Button [PWRF]
[    5.868281] ohci-pci: OHCI PCI platform driver
[    5.868597] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    5.868658] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    5.868717] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0244000
[    5.873512] ACPI: acpi_idle registered with cpuidle
[    5.878637] acpi-cpufreq: overriding BIOS provided _PSD data
[    5.885735] rtc_cmos 00:00: RTC can wake from S4
[    5.885979] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    5.886038] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[    5.900156] [drm] Initialized drm 1.1.0 20060810
[    5.912973] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    5.913358] r8169 0000:01:00.0: irq 41 for MSI/MSI-X
[    5.913638] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xffffc900010dc000, 00:03:2d:18:60:ab, XID 081000c0 IRQ 41
[    5.913644] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    5.933073] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.933080] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.933084] usb usb3: Product: OHCI PCI host controller
[    5.933087] usb usb3: Manufacturer: Linux 3.12.13-gentoo ohci_hcd
[    5.933090] usb usb3: SerialNumber: 0000:00:12.0
[    5.933362] hub 3-0:1.0: USB hub found
[    5.933382] hub 3-0:1.0: 5 ports detected
[    5.934079] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    5.934099] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[    5.934137] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0245000
[    5.943931] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    5.961269] [drm] radeon kernel modesetting enabled.
[    5.983829] kvm: Nested Virtualization enabled
[    5.983840] kvm: Nested Paging enabled
[    5.993137] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    5.993145] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.993149] usb usb4: Product: OHCI PCI host controller
[    5.993152] usb usb4: Manufacturer: Linux 3.12.13-gentoo ohci_hcd
[    5.993155] usb usb4: SerialNumber: 0000:00:13.0
[    5.993601] hub 4-0:1.0: USB hub found
[    5.993806] hub 4-0:1.0: 5 ports detected
[    5.994360] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMB0 1 (20130725/utaddress-251)
[    5.994372] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.036648] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
[    6.036692] [drm] register mmio base: 0xF0200000
[    6.036694] [drm] register mmio size: 262144
[    6.036785] ATOM BIOS: AMD
[    6.036847] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[    6.036851] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[    6.036854] [drm] Detected VRAM RAM=384M, BAR=256M
[    6.036856] [drm] RAM width 32bits DDR
[    6.037127] [TTM] Zone  kernel: Available graphics memory: 818320 kiB
[    6.037130] [TTM] Initializing pool allocator
[    6.037139] [TTM] Initializing DMA pool allocator
[    6.037190] [drm] radeon: 384M of VRAM memory ready
[    6.037193] [drm] radeon: 1024M of GTT memory ready.
[    6.040052] radeon 0000:00:01.0: radeon_uvd: Can't load firmware "radeon/SUMO_uvd.bin"
[    6.040063] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    6.059620] [drm] Loading PALM Microcode
[    6.060954] r600_cp: Failed to load firmware "radeon/PALM_pfp.bin"
[    6.060963] [drm:evergreen_startup] *ERROR* Failed to load firmware!
[    6.060969] radeon 0000:00:01.0: disabling GPU acceleration
[    6.062003] radeon 0000:00:01.0: ffff88005f6a3800 unpin not necessary
[    6.063112] [drm] Radeon Display Connectors
[    6.063114] [drm] Connector 0:
[    6.063116] [drm]   DP-1
[    6.063117] [drm]   HPD2
[    6.063120] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    6.063122] [drm]   Encoders:
[    6.063124] [drm]     DFP1: INTERNAL_UNIPHY
[    6.063125] [drm] Connector 1:
[    6.063127] [drm]   VGA-1
[    6.063130] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[    6.063131] [drm]   Encoders:
[    6.063133] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    6.063169] [drm] Internal thermal controller without fan control
[    6.063227] [drm] radeon: power management initialized
[    6.078576] systemd-udevd[2263]: renamed network interface eth0 to enp1s0
[    6.128733] [drm] fb mappable at 0xE0241000
[    6.128738] [drm] vram apper at 0xE0000000
[    6.128740] [drm] size 7680000
[    6.128741] [drm] fb depth is 24
[    6.128742] [drm]    pitch is 6400
[    6.129085] fbcon: radeondrmfb (fb0) is primary device
[    6.199139] Console: switching to colour frame buffer device 200x75
[    6.213294] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[    6.213299] radeon 0000:00:01.0: registered panic notifier
[    6.213330] [drm] Initialized radeon 2.34.0 20080528 for 0000:00:01.0 on minor 0
[    6.770157] EXT3-fs (sda1): using internal journal
[    8.179734] r8169 0000:01:00.0 enp1s0: unable to load firmware patch rtl_nic/rtl8168d-1.fw (-2)
[    8.199692] r8169 0000:01:00.0 enp1s0: link down
[    8.199836] r8169 0000:01:00.0 enp1s0: link down
[    9.468111] NET: Registered protocol family 10
[    9.468580] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   11.028663] r8169 0000:01:00.0 enp1s0: link up
[   11.028684] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready