[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.11.0-13-generic (root@amd-desktop) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu9) ) #20 SMP Wed Nov 27 05:54:32 EST 2013 (Ubuntu 3.11.0-13.20-generic 3.11.6)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=39bae622-efc7-4a51-9545-aa6bd5df8382 ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffddfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffde000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: AMD DB-FT3b/DB-FT3b, BIOS 4.0-6958-gea8f3b4 09/24/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 base 0080000000 mask FFC0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 base 00FF800000 mask FFFF800000 write-protect
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000011f000000 aka 4592M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbffde max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1a60-0x000f1a6f] mapped at [ffff8800000f1a60]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
[    0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
[    0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11ee00000-0x11effffff]
[    0.000000]  [mem 0x11ee00000-0x11effffff] page 2M
[    0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11c000000-0x11edfffff]
[    0.000000]  [mem 0x11c000000-0x11edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbffddfff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbffddfff] page 4k
[    0.000000] RAMDISK: [mem 0x35eaa000-0x36f4cfff]
[    0.000000] Reserving 128MB of memory at 720MB for crashkernel (System RAM: 3567MB)
[    0.000000] ACPI: RSDP 00000000000f1a40 00014 (v00 CORE  )
[    0.000000] ACPI: RSDT 00000000bffe2624 00040 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 00000000bffe3d88 000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 00000000bffe26c8 0167A (v02 AMD    COREBOOT 00010001 INTL 20130626)
[    0.000000] ACPI: FACS 00000000bffe3d48 00040
[    0.000000] ACPI: HPET 00000000bffe3e80 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 00000000bffe3eb8 0007E (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HEST 00000000bffe3f38 001D0 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 00000000bffe4110 0487A (v02 AMD    AGESA    00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 00000000bffe8990 00624 (v01 AMD    AGESA    00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 00000000bffe8fb4 00045 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11effffff]
[    0.000000]   NODE_DATA [mem 0x11eff9000-0x11effdfff]
[    0.000000]  [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ae00000-ffff88011e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x11effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbffddfff]
[    0.000000]   node   0: [mem 0x100000000-0x11effffff]
[    0.000000] On node 0 totalpages: 913276
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12224 pages used for memmap
[    0.000000]   DMA32 zone: 782302 pages, LIFO batch:31
[    0.000000]   Normal zone: 1984 pages used for memmap
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x818
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x05] address[0xfec20000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 72
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffde000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011ec00000 s86720 r8192 d23872 u524288
[    0.000000] pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 898983
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=39bae622-efc7-4a51-9545-aa6bd5df8382 ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3364556K/3653104K available (7141K kernel code, 1081K rwdata, 3260K rodata, 1364K init, 1420K bss, 288548K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-255.
[    0.000000] NR_IRQS:16640 nr_irqs:1024 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 14680064 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1197.707 MHz processor
[    0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2395.41 BogoMIPS (lpj=4790828)
[    0.000014] pid_max: default: 32768 minimum: 301
[    0.000078] Security Framework initialized
[    0.000115] AppArmor: AppArmor initialized
[    0.000119] Yama: becoming mindful.
[    0.000946] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003689] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.004793] Mount-cache hash table entries: 256
[    0.005247] Initializing cgroup subsys memory
[    0.005272] Initializing cgroup subsys devices
[    0.005276] Initializing cgroup subsys freezer
[    0.005281] Initializing cgroup subsys blkio
[    0.005285] Initializing cgroup subsys perf_event
[    0.005292] Initializing cgroup subsys hugetlb
[    0.005341] tseg: 0000000000
[    0.005354] CPU: Physical Processor ID: 0
[    0.005357] CPU: Processor Core ID: 0
[    0.005362] mce: CPU supports 6 MCE banks
[    0.005375] LVT offset 1 assigned for vector 0xf9
[    0.005386] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.005386] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128
[    0.005386] tlb_flushall_shift: 5
[    0.005627] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
[    0.010485] ACPI: Core revision 20130517
[    0.019232] ACPI: All ACPI Tables successfully acquired
[    0.019245] ftrace: allocating 27803 entries in 109 pages
[    0.046245] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.085944] smpboot: CPU0: AMD Eng Sample: ZT12F004J4469_22/12/07/06_9855 (fam: 16, model: 30, stepping: 00)
[    0.191677] Performance Events: AMD PMU driver.
[    0.191687] ... version:                0
[    0.191690] ... bit width:              48
[    0.191693] ... generic registers:      4
[    0.191697] ... value mask:             0000ffffffffffff
[    0.191700] ... max period:             00007fffffffffff
[    0.191703] ... fixed-purpose events:   0
[    0.191706] ... event mask:             000000000000000f
[    0.196015] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.196242] smpboot: Booting Node   0, Processors  #1 #2 #3 OK
[    0.236223] Brought up 4 CPUs
[    0.236234] smpboot: Total of 4 processors activated (9581.65 BogoMIPS)
[    0.237751] devtmpfs: initialized
[    0.241012] EVM: security.selinux
[    0.241017] EVM: security.SMACK64
[    0.241021] EVM: security.capability
[    0.243723] regulator-dummy: no parameters
[    0.243767] RTC time: 22:34:42, date: 09/21/14
[    0.243864] NET: Registered protocol family 16
[    0.244340] ACPI: bus type PCI registered
[    0.244346] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.244463] PCI: Using configuration type 1 for base access
[    0.244467] PCI: Using configuration type 1 for extended access
[    0.244924] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.244927] mtrr: probably your BIOS does not setup all CPUs.
[    0.244930] mtrr: corrected configuration.
[    0.247039] bio: create slab <bio-0> at 0
[    0.247491] ACPI: Added _OSI(Module Device)
[    0.247497] ACPI: Added _OSI(Processor Device)
[    0.247501] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.247505] ACPI: Added _OSI(Processor Aggregator Device)
[    0.249201] ACPI: EC: Look up EC in DSDT
[    0.251058] ACPI: Executed 1 blocks of module-level executable AML code
[    0.259728] ACPI: Interpreter enabled
[    0.259782] ACPI: (supports S0 S1 S2 S3 S4 S5)
[    0.259786] ACPI: Using IOAPIC for interrupt routing
[    0.259818] HEST: Table parsing has been initialized.
[    0.259825] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.259983] ACPI: No dock devices found.
[    0.267173] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.267329] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    0.267468] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[    0.267680] acpi PNP0A08:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.267939] PCI host bridge to bus 0000:00
[    0.267948] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.267954] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.267965] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.267971] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.267977] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.267983] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[    0.268001] pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
[    0.268208] pci 0000:00:01.0: [1002:9855] type 00 class 0x030000
[    0.268230] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.268246] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.268257] pci 0000:00:01.0: reg 0x20: [io  0x2000-0x20ff]
[    0.268269] pci 0000:00:01.0: reg 0x24: [mem 0xf0c00000-0xf0c3ffff]
[    0.268280] pci 0000:00:01.0: reg 0x30: [mem 0xf0c40000-0xf0c5ffff pref]
[    0.268327] pci 0000:00:01.0: supports D1 D2
[    0.268333] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    0.268516] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[    0.268535] pci 0000:00:01.1: reg 0x10: [mem 0xf0c80000-0xf0c83fff 64bit]
[    0.268609] pci 0000:00:01.1: supports D1 D2
[    0.268769] pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
[    0.268957] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
[    0.269039] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[    0.269154] pci 0000:00:02.3: System wakeup disabled by ACPI
[    0.269241] pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
[    0.269264] pci 0000:00:08.0: reg 0x10: [mem 0xf0c60000-0xf0c7ffff 64bit pref]
[    0.269274] pci 0000:00:08.0: reg 0x18: [mem 0xf0a00000-0xf0afffff]
[    0.269285] pci 0000:00:08.0: reg 0x1c: [mem 0xf0c8c000-0xf0c8cfff]
[    0.269296] pci 0000:00:08.0: reg 0x20: [mem 0xf0b00000-0xf0bfffff]
[    0.269306] pci 0000:00:08.0: reg 0x24: [mem 0xf0c88000-0xf0c89fff]
[    0.269517] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[    0.269543] pci 0000:00:10.0: reg 0x10: [mem 0xf0c8a000-0xf0c8bfff 64bit]
[    0.269650] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.269768] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.269849] pci 0000:00:11.0: [1022:7800] type 00 class 0x01018f
[    0.269872] pci 0000:00:11.0: reg 0x10: [io  0x2410-0x2417]
[    0.269885] pci 0000:00:11.0: reg 0x14: [io  0x2420-0x2423]
[    0.269898] pci 0000:00:11.0: reg 0x18: [io  0x2418-0x241f]
[    0.269911] pci 0000:00:11.0: reg 0x1c: [io  0x2424-0x2427]
[    0.269923] pci 0000:00:11.0: reg 0x20: [io  0x2400-0x240f]
[    0.269936] pci 0000:00:11.0: reg 0x24: [mem 0xf0c8d000-0xf0c8d3ff]
[    0.269960] pci 0000:00:11.0: set SATA to AHCI mode
[    0.269997] pci 0000:00:11.0: PME# supported from D3hot
[    0.270169] pci 0000:00:12.0: [1022:7808] type 00 class 0x0c0320
[    0.270192] pci 0000:00:12.0: reg 0x10: [mem 0xf0c8d400-0xf0c8d4ff]
[    0.270277] pci 0000:00:12.0: supports D1 D2
[    0.270282] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.270390] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.270468] pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
[    0.270491] pci 0000:00:13.0: reg 0x10: [mem 0xf0c8d500-0xf0c8d5ff]
[    0.270575] pci 0000:00:13.0: supports D1 D2
[    0.270580] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.270688] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.270766] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.270980] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.271202] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
[    0.271225] pci 0000:00:14.7: reg 0x10: [mem 0xf0c8d600-0xf0c8d6ff 64bit]
[    0.271422] pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
[    0.271594] pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
[    0.271778] pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
[    0.271948] pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
[    0.272125] pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
[    0.272293] pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
[    0.272568] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.272590] pci 0000:01:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.272623] pci 0000:01:00.0: reg 0x18: [mem 0xf090c000-0xf090cfff 64bit]
[    0.272645] pci 0000:01:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref]
[    0.272726] pci 0000:01:00.0: supports D1 D2
[    0.272731] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.272844] pci 0000:01:00.1: [10ec:816a] type 00 class 0x070002
[    0.272866] pci 0000:01:00.1: reg 0x10: [io  0x1400-0x14ff]
[    0.272898] pci 0000:01:00.1: reg 0x18: [mem 0xf090d000-0xf090dfff 64bit]
[    0.272920] pci 0000:01:00.1: reg 0x20: [mem 0xf0900000-0xf0903fff 64bit]
[    0.273001] pci 0000:01:00.1: supports D1 D2
[    0.273006] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.273113] pci 0000:01:00.2: [10ec:816b] type 00 class 0x070002
[    0.273135] pci 0000:01:00.2: reg 0x10: [io  0x1800-0x18ff]
[    0.273167] pci 0000:01:00.2: reg 0x18: [mem 0xf090e000-0xf090efff 64bit]
[    0.273188] pci 0000:01:00.2: reg 0x20: [mem 0xf0904000-0xf0907fff 64bit]
[    0.273269] pci 0000:01:00.2: supports D1 D2
[    0.273275] pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.273383] pci 0000:01:00.3: [10ec:816c] type 00 class 0x0c0701
[    0.273405] pci 0000:01:00.3: reg 0x10: [io  0x1c00-0x1cff]
[    0.273437] pci 0000:01:00.3: reg 0x18: [mem 0xf090f000-0xf090f0ff 64bit]
[    0.273458] pci 0000:01:00.3: reg 0x20: [mem 0xf0908000-0xf090bfff 64bit]
[    0.273539] pci 0000:01:00.3: supports D1 D2
[    0.273544] pci 0000:01:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.279710] pci 0000:00:02.3: PCI bridge to [bus 01]
[    0.279720] pci 0000:00:02.3:   bridge window [io  0x1000-0x1fff]
[    0.279727] pci 0000:00:02.3:   bridge window [mem 0xf0900000-0xf09fffff]
[    0.279736] pci 0000:00:02.3:   bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[    0.280045] ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15)
[    0.280182] ACPI: PCI Interrupt Link [INTB] (IRQs 3 *4 5 7 10 11 12 15)
[    0.280316] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15)
[    0.280447] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15)
[    0.280577] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 *11 12 15)
[    0.280707] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *10
[    0.280832] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.280962] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.281411] ACPI: Enabled 5 GPEs in block 00 to 1F
[    0.281429] ACPI: \_SB_.PCI0: notify handler is installed
[    0.281489] Found 1 acpi root devices
[    0.281718] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.281728] vgaarb: loaded
[    0.281731] vgaarb: bridge control possible 0000:00:01.0
[    0.282191] SCSI subsystem initialized
[    0.282197] ACPI: bus type ATA registered
[    0.282315] libata version 3.00 loaded.
[    0.282356] ACPI: bus type USB registered
[    0.282405] usbcore: registered new interface driver usbfs
[    0.282428] usbcore: registered new interface driver hub
[    0.282487] usbcore: registered new device driver usb
[    0.282768] PCI: Using ACPI for IRQ routing
[    0.282774] PCI: pci_cache_line_size set to 64 bytes
[    0.282847] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.282852] e820: reserve RAM buffer [mem 0xbffde000-0xbfffffff]
[    0.282856] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
[    0.283062] NetLabel: Initializing
[    0.283067] NetLabel:  domain hash size = 128
[    0.283070] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.283094] NetLabel:  unlabeled traffic allowed by default
[    0.283248] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.283258] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.285313] Switched to clocksource hpet
[    0.297724] AppArmor: AppArmor Filesystem Enabled
[    0.297793] pnp: PnP ACPI init
[    0.297826] ACPI: bus type PNP registered
[    0.298176] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
[    0.298187] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.298276] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.298342] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.298373] pnp 00:03: [dma 4]
[    0.298434] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.298502] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.298797] pnp: PnP ACPI: found 5 devices
[    0.298801] ACPI: bus type PNP unregistered
[    0.308053] pci 0000:00:02.3: PCI bridge to [bus 01]
[    0.308062] pci 0000:00:02.3:   bridge window [io  0x1000-0x1fff]
[    0.308070] pci 0000:00:02.3:   bridge window [mem 0xf0900000-0xf09fffff]
[    0.308078] pci 0000:00:02.3:   bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[    0.308237] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.308244] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.308250] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.308255] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.308261] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
[    0.308267] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.308272] pci_bus 0000:01: resource 1 [mem 0xf0900000-0xf09fffff]
[    0.308278] pci_bus 0000:01: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
[    0.308349] NET: Registered protocol family 2
[    0.308765] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.309069] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.309262] TCP: Hash tables configured (established 32768 bind 32768)
[    0.309341] TCP: reno registered
[    0.309363] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.309411] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.309579] NET: Registered protocol family 1
[    0.309610] pci 0000:00:01.0: Boot video device
[    0.310525] PCI: CLS 64 bytes, default 64
[    0.310634] Trying to unpack rootfs image as initramfs...
[    1.017726] Freeing initrd memory: 17036K (ffff880035eaa000 - ffff880036f4d000)
[    1.017739] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.017746] software IO TLB [mem 0xbbfde000-0xbffde000] (64MB) mapped at [ffff8800bbfde000-ffff8800bffddfff]
[    1.018089] perf: AMD NB counters detected
[    1.018103] perf: AMD L2I counters detected
[    1.018138] LVT offset 0 assigned for vector 0x400
[    1.018189] perf: AMD IBS detected (0x000000ff)
[    1.018254] Scanning for low memory corruption every 60 seconds
[    1.018889] Initialise module verification
[    1.019003] audit: initializing netlink socket (disabled)
[    1.019025] type=2000 audit(1411338882.904:1): initialized
[    1.090176] bounce pool size: 64 pages
[    1.090199] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.093180] zbud: loaded
[    1.093475] VFS: Disk quotas dquot_6.5.2
[    1.093581] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.094793] fuse init (API version 7.22)
[    1.094983] msgmni has been set to 6604
[    1.095974] Key type asymmetric registered
[    1.095980] Asymmetric key parser 'x509' registered
[    1.096101] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.096194] io scheduler noop registered
[    1.096200] io scheduler deadline registered (default)
[    1.096281] io scheduler cfq registered
[    1.096543] pcieport 0000:00:02.3: irq 72 for MSI/MSI-X
[    1.096694] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
[    1.096701] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.096706] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[    1.096711] pci 0000:01:00.2: Signaling PME through PCIe PME interrupt
[    1.096716] pci 0000:01:00.3: Signaling PME through PCIe PME interrupt
[    1.096723] pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded
[    1.096753] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.096790] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.097055] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.097066] ACPI: Power Button [PWRB]
[    1.097163] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.097169] ACPI: Power Button [PWRF]
[    1.097286] ACPI: acpi_idle registered with cpuidle
[    1.097761] GHES: Failed to enable APEI firmware first mode.
[    1.097915] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.118694] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.122101] Linux agpgart interface v0.103
[    1.125289] brd: module loaded
[    1.127120] loop: module loaded
[    1.128018] libphy: Fixed MDIO Bus: probed
[    1.128238] tun: Universal TUN/TAP device driver, 1.6
[    1.128242] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.128338] PPP generic driver version 2.4.2
[    1.128429] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.128434] ehci-pci: EHCI PCI platform driver
[    1.128626] ehci-pci 0000:00:12.0: EHCI Host Controller
[    1.128642] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[    1.128658] ehci-pci 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.128672] ehci-pci 0000:00:12.0: debug port 2
[    1.128744] ehci-pci 0000:00:12.0: irq 18, io mem 0xf0c8d400
[    1.137408] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[    1.137451] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.137457] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.137462] usb usb1: Product: EHCI Host Controller
[    1.137467] usb usb1: Manufacturer: Linux 3.11.0-13-generic ehci_hcd
[    1.137471] usb usb1: SerialNumber: 0000:00:12.0
[    1.137681] hub 1-0:1.0: USB hub found
[    1.137693] hub 1-0:1.0: 2 ports detected
[    1.137971] ehci-pci 0000:00:13.0: EHCI Host Controller
[    1.137985] ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[    1.137993] ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.138007] ehci-pci 0000:00:13.0: debug port 2
[    1.138046] ehci-pci 0000:00:13.0: irq 18, io mem 0xf0c8d500
[    1.149409] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
[    1.149438] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.149443] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.149448] usb usb2: Product: EHCI Host Controller
[    1.149453] usb usb2: Manufacturer: Linux 3.11.0-13-generic ehci_hcd
[    1.149458] usb usb2: SerialNumber: 0000:00:13.0
[    1.149649] hub 2-0:1.0: USB hub found
[    1.149659] hub 2-0:1.0: 2 ports detected
[    1.149801] ehci-platform: EHCI generic platform driver
[    1.149818] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.149822] ohci-platform: OHCI generic platform driver
[    1.149837] uhci_hcd: USB Universal Host Controller Interface driver
[    1.150009] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.150022] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[    1.150261] xhci_hcd 0000:00:10.0: irq 73 for MSI/MSI-X
[    1.150278] xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
[    1.150295] xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X
[    1.150311] xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
[    1.150326] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
[    1.150493] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.150499] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.150504] usb usb3: Product: xHCI Host Controller
[    1.150508] usb usb3: Manufacturer: Linux 3.11.0-13-generic xhci_hcd
[    1.150513] usb usb3: SerialNumber: 0000:00:10.0
[    1.150649] xHCI xhci_add_endpoint called for root hub
[    1.150653] xHCI xhci_check_bandwidth called for root hub
[    1.150706] hub 3-0:1.0: USB hub found
[    1.150718] hub 3-0:1.0: 2 ports detected
[    1.150856] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.150870] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[    1.153620] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.153625] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.153630] usb usb4: Product: xHCI Host Controller
[    1.153635] usb usb4: Manufacturer: Linux 3.11.0-13-generic xhci_hcd
[    1.153639] usb usb4: SerialNumber: 0000:00:10.0
[    1.153788] xHCI xhci_add_endpoint called for root hub
[    1.153792] xHCI xhci_check_bandwidth called for root hub
[    1.153841] hub 4-0:1.0: USB hub found
[    1.153852] hub 4-0:1.0: 2 ports detected
[    1.161513] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.017470] tsc: Refined TSC clocksource calibration: 1197.753 MHz
[    2.181135] i8042: No controller found
[    2.181321] mousedev: PS/2 mouse device common for all mice
[    2.181604] rtc_cmos 00:01: RTC can wake from S4
[    2.181759] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.181791] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
[    2.181933] device-mapper: uevent: version 1.0.3
[    2.182075] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    2.182202] cpuidle: using governor ladder
[    2.182357] cpuidle: using governor menu
[    2.182387] ledtrig-cpu: registered to indicate activity on CPUs
[    2.182587] TCP: cubic registered
[    2.182805] NET: Registered protocol family 10
[    2.183253] NET: Registered protocol family 17
[    2.183288] Key type dns_resolver registered
[    2.183906] PM: Hibernation image not present or could not be loaded.
[    2.183915] Loading module verification certificates
[    2.186608] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: f27c94f79b8e017f1b6771433b38db3e1a5f77e1'
[    2.186636] registered taskstats version 1
[    2.192101] Key type trusted registered
[    2.196587] Key type encrypted registered
[    2.201072] AppArmor: AppArmor sha1 policy hashing enabled
[    2.201644]   Magic number: 14:959:603
[    2.201816] rtc_cmos 00:01: setting system clock to 2014-09-21 22:34:44 UTC (1411338884)
[    2.202083] acpi-cpufreq: overriding BIOS provided _PSD data
[    2.202460] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.202464] EDD information not available.
[    2.205606] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[    2.205613] Write protecting the kernel read-only data: 12288k
[    2.212745] Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
[    2.218054] Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
[    2.243257] systemd-udevd[114]: starting version 204
[    2.278418] r8168: module verification failed: signature and/or required key missing - tainting kernel
[    2.279168] r8168 Gigabit Ethernet driver 8.038.00-NAPI loaded
[    2.279400] r8168 0000:01:00.0: irq 78 for MSI/MSI-X
[    2.288508] sdhci: Secure Digital Host Controller Interface driver
[    2.288516] sdhci: Copyright(c) Pierre Ossman
[    2.289168] ahci 0000:00:11.0: version 3.0
[    2.289438] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    2.289448] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part 
[    2.292460] scsi0 : ahci
[    2.292672] scsi1 : ahci
[    2.292791] ata1: SATA max UDMA/133 abar m1024@0xf0c8d000 port 0xf0c8d100 irq 19
[    2.292798] ata2: SATA max UDMA/133 abar m1024@0xf0c8d000 port 0xf0c8d180 irq 19
[    2.292857] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[    2.293069] mmc0: no vqmmc regulator found
[    2.293075] mmc0: no vmmc regulator found
[    2.293224] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[    2.304401] eth%d: 0xffffc9000074a000, 00:00:1a:1b:58:4a, IRQ 78
[    2.304751] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[    2.304767] r8168  Copyright (C) 2013  Realtek NIC software team <nicfae@realtek.com> 
[    2.304767]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. 
[    2.304767]  This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. 
[    2.389524] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.521834] usb 1-1: New USB device found, idVendor=0438, idProduct=7900
[    2.521842] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.522283] hub 1-1:1.0: USB hub found
[    2.522451] hub 1-1:1.0: 4 ports detected
[    2.613535] ata2: SATA link down (SStatus 0 SControl 300)
[    2.633528] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.765866] usb 2-1: New USB device found, idVendor=0438, idProduct=7900
[    2.765874] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.766180] hub 2-1:1.0: USB hub found
[    2.766236] hub 2-1:1.0: 4 ports detected
[    2.781540] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.782738] ata1.00: ATA-8: ST3750525AS, JC45, max UDMA/133
[    2.782745] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.784119] ata1.00: configured for UDMA/133
[    2.784399] scsi 0:0:0:0: Direct-Access     ATA      ST3750525AS      JC45 PQ: 0 ANSI: 5
[    2.784704] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    2.784757] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.784924] sd 0:0:0:0: [sda] Write Protect is off
[    2.784933] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.785025] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.826219]  sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[    2.827395] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.853698] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    2.965056] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52e
[    2.965067] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.965073] usb 1-1.1: Product: USB Receiver
[    2.965078] usb 1-1.1: Manufacturer: Logitech
[    2.974023] hidraw: raw HID events driver (C) Jiri Kosina
[    2.983271] usbcore: registered new interface driver usbhid
[    2.983278] usbhid: USB HID core driver
[    2.987420] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
[    2.987676] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-1.1/input0
[    2.988534] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input3
[    2.988968] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1.1/input1
[    3.017679] Switched to clocksource tsc
[    3.650758] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[    3.650768] EXT4-fs (sda5): write access will be enabled during recovery
[    5.319566] EXT4-fs (sda5): recovery complete
[    5.327574] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   11.543407] Adding 1757180k swap on /dev/sda6.  Priority:-1 extents:1 across:1757180k FS
[   11.583952] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.649401] systemd-udevd[287]: starting version 204
[   11.746066] lp: driver loaded but no devices found
[   11.814695] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[   11.814705] AMD IOMMUv2 functionality not available on this system
[   11.830035] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   11.830048] Disabling lock debugging due to kernel taint
[   11.869858] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3154 MBytes.
[   11.869972] <6>[fglrx]   vendor: 1002 device: 9855 count: 1
[   11.874546] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   11.879844] <6>[fglrx] ioport: bar 4, base 0x2000, size: 0x100
[   11.881486] <6>[fglrx] Kernel PAT support is enabled
[   11.881535] <6>[fglrx] module loaded - fglrx 13.30.1 [Nov 12 2013] with 1 minors
[   11.908186] microcode: CPU0: patch_level=0x07030006
[   11.978129] type=1400 audit(1411353294.270:2): apparmor="STATUS" operation="profile_load" parent=325 profile="unconfined" name="/sbin/dhclient" pid=343 comm="apparmor_parser"
[   11.978154] type=1400 audit(1411353294.270:3): apparmor="STATUS" operation="profile_load" parent=325 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=343 comm="apparmor_parser"
[   11.978172] type=1400 audit(1411353294.270:4): apparmor="STATUS" operation="profile_load" parent=325 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=343 comm="apparmor_parser"
[   11.979952] type=1400 audit(1411353294.274:5): apparmor="STATUS" operation="profile_replace" parent=325 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=343 comm="apparmor_parser"
[   11.979972] type=1400 audit(1411353294.274:6): apparmor="STATUS" operation="profile_replace" parent=325 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=343 comm="apparmor_parser"
[   11.980892] type=1400 audit(1411353294.274:7): apparmor="STATUS" operation="profile_replace" parent=325 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=343 comm="apparmor_parser"
[   12.030666] hda-intel 0000:00:01.1: Using LPIB position fix
[   12.030722] snd_hda_intel 0000:00:01.1: irq 79 for MSI/MSI-X
[   12.033471] hda-intel 0000:00:01.1: Enable sync_write for stable communication
[   12.045131] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
[   12.045334] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
[   12.151385] microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin
[   12.151422] microcode: CPU1: patch_level=0x07030006
[   12.151442] microcode: CPU2: patch_level=0x07030006
[   12.151461] microcode: CPU3: patch_level=0x07030006
[   12.151753] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   12.240625] kvm: Nested Virtualization enabled
[   12.240638] kvm: Nested Paging enabled
[   12.983208] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   13.193578] init: failsafe main process (554) killed by TERM signal
[   13.462404] type=1400 audit(1411353295.758:8): apparmor="STATUS" operation="profile_load" parent=641 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=649 comm="apparmor_parser"
[   13.462425] type=1400 audit(1411353295.758:9): apparmor="STATUS" operation="profile_load" parent=641 profile="unconfined" name="chromium_browser" pid=649 comm="apparmor_parser"
[   13.463498] type=1400 audit(1411353295.758:10): apparmor="STATUS" operation="profile_replace" parent=641 profile="unconfined" name="chromium_browser" pid=649 comm="apparmor_parser"
[   13.466840] type=1400 audit(1411353295.762:11): apparmor="STATUS" operation="profile_load" parent=641 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=650 comm="apparmor_parser"
[   13.527941] Bluetooth: Core ver 2.16
[   13.527990] NET: Registered protocol family 31
[   13.527995] Bluetooth: HCI device and connection manager initialized
[   13.528013] Bluetooth: HCI socket layer initialized
[   13.528020] Bluetooth: L2CAP socket layer initialized
[   13.528034] Bluetooth: SCO socket layer initialized
[   13.537717] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.537727] Bluetooth: BNEP filters: protocol multicast
[   13.537747] Bluetooth: BNEP socket layer initialized
[   13.547353] Bluetooth: RFCOMM TTY layer initialized
[   13.547383] Bluetooth: RFCOMM socket layer initialized
[   13.547387] Bluetooth: RFCOMM ver 1.11
[   13.592457] init: avahi-cups-reload main process (684) terminated with status 1
[   13.621915] ppdev: user-space parallel port driver
[   14.569070] IPv6: ADDRCONF(NETDEV_UP): eth12: link is not ready
[   14.569762] IPv6: ADDRCONF(NETDEV_UP): eth12: link is not ready
[   15.115453] vesafb: mode is 1920x1200x32, linelength=7680, pages=0
[   15.115462] vesafb: scrolling: redraw
[   15.115468] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[   15.116824] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001180000, using 9024k, total 9024k
[   15.118010] Console: switching to colour frame buffer device 240x75
[   15.136727] fb0: VESA VGA frame buffer device
[   15.248490] init: plymouth-splash main process (1002) terminated with status 1
[   16.501478] fglrx_pci 0000:00:01.0: irq 80 for MSI/MSI-X
[   16.504269] <6>[fglrx] Firegl kernel thread PID: 1043
[   16.504491] <6>[fglrx] Firegl kernel thread PID: 1044
[   16.504707] <6>[fglrx] Firegl kernel thread PID: 1045
[   16.504972] <6>[fglrx] IRQ 80 Enabled
[   16.520890] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   16.520897] <6>[fglrx] Reserved FB block: Unshared offset:fc57000, size:3000 
[   16.520901] <6>[fglrx] Reserved FB block: Unshared offset:fc5a000, size:3a6000 
[   16.520906] <6>[fglrx] Reserved FB block: Unshared offset:1ffc8000, size:38000 
[   16.566979] r8168: eth12: link up
[   16.567030] IPv6: ADDRCONF(NETDEV_CHANGE): eth12: link becomes ready