[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.63-2+deb7u1
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=5fb96d36-a3f9-4972-8498-338d94764946 ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[    0.000000]  BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[    0.000000]  BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[    0.000000]  BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[    0.000000]  BIOS-e820: 0000000040200000 - 00000000aced4000 (usable)
[    0.000000]  BIOS-e820: 00000000aced4000 - 00000000afa00000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000014f600000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Google Stout/Stout, BIOS 4.0-6588-g4acd8ea-dirty 09/04/2014
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x14f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0AD000000 mask FFF000000 uncachable
[    0.000000]   1 base 0AE000000 mask FFE000000 uncachable
[    0.000000]   2 base 0B0000000 mask FF0000000 uncachable
[    0.000000]   3 base 0C0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0D0000000 mask FF0000000 write-combining
[    0.000000]   5 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0xaced4 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000aced4000
[    0.000000]  0000000000 - 00ace00000 page 2M
[    0.000000]  00ace00000 - 00aced4000 page 4k
[    0.000000] kernel direct mapping tables up to aced4000 @ 1fffb000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000014f600000
[    0.000000]  0100000000 - 014f600000 page 2M
[    0.000000] kernel direct mapping tables up to 14f600000 @ aced1000-aced4000
[    0.000000] RAMDISK: 36bec000 - 375ee000
[    0.000000] ACPI: RSDP 00000000000f6970 00024 (v02 CORE  )
[    0.000000] ACPI: XSDT 00000000acfef0e0 0004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 00000000acff2960 000F4 (v03 CORE   COREBOOT 00000000 CORE 00000001)
[    0.000000] ACPI: DSDT 00000000acfef250 0370C (v02 COREv4 COREBOOT 20110725 INTL 20140114)
[    0.000000] ACPI: FACS 00000000acfef210 00040
[    0.000000] ACPI: HPET 00000000acff2a60 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 00000000acff2aa0 0005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: MCFG 00000000acff2b00 0003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 00000000acff3b40 008A0 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000014f600000
[    0.000000] Initmem setup node 0 0000000000000000-000000014f600000
[    0.000000]   NODE_DATA [000000014f5fb000 - 000000014f5fffff]
[    0.000000]  [ffffea0000000000-ffffea00049fffff] PMD -> [ffff88014ac00000-ffff88014e5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0014f600
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x00020000
[    0.000000]     0: 0x00020200 -> 0x00040000
[    0.000000]     0: 0x00040200 -> 0x000aced4
[    0.000000]     0: 0x00100000 -> 0x0014f600
[    0.000000] On node 0 totalpages: 1032291
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 688908 pages, LIFO batch:31
[    0.000000]   Normal zone: 4445 pages used for memmap
[    0.000000]   Normal zone: 320675 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 00000000aced4000 - 00000000afa00000
[    0.000000] PM: Registered nosave memory: 00000000afa00000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[    0.000000] PM: Registered nosave memory: 00000000f4000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at afa00000 (gap: afa00000:40600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88014f200000 s82944 r8192 d23552 u1048576
[    0.000000] pcpu-alloc: s82944 r8192 d23552 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1013505
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=5fb96d36-a3f9-4972-8498-338d94764946 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3984708k/5494784k available (3432k kernel code, 1365620k absent, 144456k reserved, 3306k data, 580k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 1496.472 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.94 BogoMIPS (lpj=5985888)
[    0.000008] pid_max: default: 32768 minimum: 301
[    0.000061] Security Framework initialized
[    0.000068] AppArmor: AppArmor disabled by boot time parameter
[    0.000437] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.002063] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002789] Mount-cache hash table entries: 256
[    0.002921] Initializing cgroup subsys cpuacct
[    0.002926] Initializing cgroup subsys memory
[    0.002939] Initializing cgroup subsys devices
[    0.002942] Initializing cgroup subsys freezer
[    0.002945] Initializing cgroup subsys net_cls
[    0.002947] Initializing cgroup subsys blkio
[    0.002955] Initializing cgroup subsys perf_event
[    0.002993] CPU: Physical Processor ID: 0
[    0.002995] CPU: Processor Core ID: 0
[    0.003003] mce: CPU supports 7 MCE banks
[    0.003019] CPU0: Thermal monitoring enabled (TM1)
[    0.003030] using mwait in idle threads.
[    0.003672] ACPI: Core revision 20110623
[    0.007163] x2apic not enabled, IRQ remapping init failed
[    0.007597] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.047267] CPU0: Intel(R) Celeron(R) CPU 1007U @ 1.50GHz stepping 09
[    0.151685] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[    0.151694] ... version:                3
[    0.151696] ... bit width:              48
[    0.151698] ... generic registers:      8
[    0.151700] ... value mask:             0000ffffffffffff
[    0.151702] ... max period:             000000007fffffff
[    0.151704] ... fixed-purpose events:   3
[    0.151706] ... event mask:             00000007000000ff
[    0.151843] NMI watchdog enabled, takes one hw-pmu counter.
[    0.151976] Booting Node   0, Processors  #1 Ok.
[    0.151980] smpboot cpu 1: start_ip = 9a000
[    0.259802] NMI watchdog enabled, takes one hw-pmu counter.
[    0.259837] Brought up 2 CPUs
[    0.259840] Total of 2 processors activated (5986.14 BogoMIPS).
[    0.261691] devtmpfs: initialized
[    0.265823] print_constraints: dummy: 
[    0.265893] NET: Registered protocol family 16
[    0.266004] ACPI: bus type pci registered
[    0.266088] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.266092] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.270602] PCI: Using configuration type 1 for base access
[    0.271494] bio: create slab <bio-0> at 0
[    0.271611] ACPI: Added _OSI(Module Device)
[    0.271614] ACPI: Added _OSI(Processor Device)
[    0.271616] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.271619] ACPI: Added _OSI(Processor Aggregator Device)
[    0.272777] ACPI: EC: Look up EC in DSDT
[    0.283130] ACPI: Interpreter enabled
[    0.283135] ACPI: (supports S0 S3 S4 S5)
[    0.283166] ACPI: Using IOAPIC for interrupt routing
[    0.290195] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.290352] ACPI: No dock devices found.
[    0.290354] HEST: Table not found.
[    0.290358] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.290482] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.290658] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.290662] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.290665] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.290668] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[    0.290671] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[    0.290673] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[    0.290676] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[    0.290679] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    0.290682] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.290685] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.290687] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.290690] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    0.290693] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[    0.290696] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[    0.290699] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[    0.290701] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[    0.290704] pci_root PNP0A08:00: host bridge window [mem 0xafa00000-0xfebfffff]
[    0.290707] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[    0.290716] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cefff])
[    0.290732] pci 0000:00:00.0: [8086:0154] type 0 class 0x000600
[    0.290785] pci 0000:00:02.0: [8086:0156] type 0 class 0x000300
[    0.290801] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe03fffff 64bit]
[    0.290810] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.290818] pci 0000:00:02.0: reg 20: [io  0x3000-0x303f]
[    0.290906] pci 0000:00:14.0: [8086:1e31] type 0 class 0x000c03
[    0.290938] pci 0000:00:14.0: reg 10: [mem 0xe0700000-0xe070ffff 64bit]
[    0.291051] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.291120] pci 0000:00:16.0: [8086:1e3a] type 0 class 0x000780
[    0.291216] pci 0000:00:16.0: reg 10: [mem 0xe0715100-0xe071510f 64bit]
[    0.291584] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.291675] pci 0000:00:1a.0: [8086:1e2d] type 0 class 0x000c03
[    0.291705] pci 0000:00:1a.0: reg 10: [mem 0xe0714800-0xe0714bff]
[    0.291834] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.291872] pci 0000:00:1b.0: [8086:1e20] type 0 class 0x000403
[    0.291897] pci 0000:00:1b.0: reg 10: [mem 0xe0710000-0xe0713fff 64bit]
[    0.292005] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.292041] pci 0000:00:1c.0: [8086:1e10] type 1 class 0x000604
[    0.292154] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.292191] pci 0000:00:1c.1: [8086:1e12] type 1 class 0x000604
[    0.292306] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.292342] pci 0000:00:1c.2: [8086:1e14] type 1 class 0x000604
[    0.292453] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.292490] pci 0000:00:1c.3: [8086:1e1a] type 1 class 0x000604
[    0.292602] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.292649] pci 0000:00:1d.0: [8086:1e26] type 0 class 0x000c03
[    0.292678] pci 0000:00:1d.0: reg 10: [mem 0xe0714c00-0xe0714fff]
[    0.292810] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.292845] pci 0000:00:1f.0: [8086:1e57] type 0 class 0x000601
[    0.293011] pci 0000:00:1f.2: [8086:1e03] type 0 class 0x000106
[    0.293041] pci 0000:00:1f.2: reg 10: [io  0x3060-0x3067]
[    0.293057] pci 0000:00:1f.2: reg 14: [io  0x3070-0x3073]
[    0.293072] pci 0000:00:1f.2: reg 18: [io  0x3068-0x306f]
[    0.293087] pci 0000:00:1f.2: reg 1c: [io  0x3074-0x3077]
[    0.293102] pci 0000:00:1f.2: reg 20: [io  0x3040-0x305f]
[    0.293117] pci 0000:00:1f.2: reg 24: [mem 0xe0714000-0xe07147ff]
[    0.293186] pci 0000:00:1f.2: PME# supported from D3hot
[    0.293214] pci 0000:00:1f.3: [8086:1e22] type 0 class 0x000c05
[    0.293242] pci 0000:00:1f.3: reg 10: [mem 0xe0715000-0xe07150ff 64bit]
[    0.293282] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.293392] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.293516] pci 0000:02:00.0: [168c:0034] type 0 class 0x000280
[    0.293573] pci 0000:02:00.0: reg 10: [mem 0xe0400000-0xe047ffff 64bit]
[    0.293718] pci 0000:02:00.0: reg 30: [mem 0xe0480000-0xe048ffff pref]
[    0.293861] pci 0000:02:00.0: supports D1 D2
[    0.293863] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.299684] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.299693] pci 0000:00:1c.1:   bridge window [mem 0xe0400000-0xe04fffff]
[    0.299850] pci 0000:03:00.0: [10ec:5209] type 0 class 0x00ff00
[    0.299934] pci 0000:03:00.0: reg 10: [mem 0xe0500000-0xe0500fff]
[    0.300498] pci 0000:03:00.0: supports D1 D2
[    0.300501] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[    0.307697] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.307705] pci 0000:00:1c.2:   bridge window [mem 0xe0500000-0xe05fffff]
[    0.307803] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[    0.307829] pci 0000:04:00.0: reg 10: [io  0x2000-0x20ff]
[    0.307874] pci 0000:04:00.0: reg 18: [mem 0xe0604000-0xe0604fff 64bit pref]
[    0.307903] pci 0000:04:00.0: reg 20: [mem 0xe0600000-0xe0603fff 64bit pref]
[    0.308013] pci 0000:04:00.0: supports D1 D2
[    0.308016] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.315671] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.315677] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.315690] pci 0000:00:1c.3:   bridge window [mem 0xe0600000-0xe06fffff 64bit pref]
[    0.315727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.315880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.316192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.316503] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.316826] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.317187]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.317234]  pci0000:00: ACPI _OSC control (0x1d) granted
[    0.321220] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[    0.321281] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
[    0.321342] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[    0.321398] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
[    0.321454] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.321509] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.321563] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.321619] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.321745] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.321755] vgaarb: loaded
[    0.321757] vgaarb: bridge control possible 0000:00:02.0
[    0.321804] PCI: Using ACPI for IRQ routing
[    0.323681] PCI: pci_cache_line_size set to 64 bytes
[    0.323804] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.323807] reserve RAM buffer: 00000000aced4000 - 00000000afffffff 
[    0.323810] reserve RAM buffer: 000000014f600000 - 000000014fffffff 
[    0.323947] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.323955] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.325974] Switching to clocksource hpet
[    0.328149] pnp: PnP ACPI init
[    0.328164] ACPI: bus type pnp registered
[    0.328265] pnp 00:00: [bus 00-ff]
[    0.328270] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.328273] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.328276] pnp 00:00: [io  0x0d00-0xffff window]
[    0.328278] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.328281] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.328284] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.328287] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.328290] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.328292] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.328295] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.328298] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.328300] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.328303] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.328306] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.328308] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.328311] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.328314] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.328316] pnp 00:00: [mem 0xafa00000-0xfebfffff window]
[    0.328319] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.328378] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.328404] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.328407] pnp 00:01: [mem 0xfed10000-0xfed17fff]
[    0.328409] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.328412] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.328414] pnp 00:01: [mem 0xf0000000-0xf3ffffff]
[    0.328417] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    0.328419] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[    0.328422] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[    0.328424] pnp 00:01: [mem 0x20000000-0x201fffff]
[    0.328427] pnp 00:01: [mem 0x40000000-0x401fffff]
[    0.328481] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.328485] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.328488] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.328491] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.328495] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.328498] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.328502] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.328505] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.328509] system 00:01: [mem 0x20000000-0x201fffff] has been reserved
[    0.328512] system 00:01: [mem 0x40000000-0x401fffff] has been reserved
[    0.328516] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.331132] pnp 00:02: [io  0x0000-0x001f]
[    0.331135] pnp 00:02: [io  0x0081-0x0091]
[    0.331137] pnp 00:02: [io  0x0093-0x009f]
[    0.331139] pnp 00:02: [io  0x00c0-0x00df]
[    0.331142] pnp 00:02: [dma 4]
[    0.331186] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.331197] pnp 00:03: [mem 0xff000000-0xffffffff]
[    0.331238] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    0.331328] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.331389] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.331393] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.331407] pnp 00:05: [io  0x00f0]
[    0.331417] pnp 00:05: [irq 13]
[    0.331459] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.331472] pnp 00:06: [io  0x002e-0x002f]
[    0.331475] pnp 00:06: [io  0x004e-0x004f]
[    0.331477] pnp 00:06: [io  0x0061]
[    0.331479] pnp 00:06: [io  0x0063]
[    0.331481] pnp 00:06: [io  0x0065]
[    0.331483] pnp 00:06: [io  0x0067]
[    0.331485] pnp 00:06: [io  0x0080]
[    0.331487] pnp 00:06: [io  0x0092]
[    0.331490] pnp 00:06: [io  0x00b2-0x00b3]
[    0.331492] pnp 00:06: [io  0x0500-0x057f]
[    0.331494] pnp 00:06: [io  0x0480-0x04bf]
[    0.331554] system 00:06: [io  0x0500-0x057f] has been reserved
[    0.331557] system 00:06: [io  0x0480-0x04bf] has been reserved
[    0.331560] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.331571] pnp 00:07: [io  0x0070-0x0077]
[    0.331612] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.331634] pnp 00:08: [io  0x0060]
[    0.331637] pnp 00:08: [io  0x0064]
[    0.331643] pnp 00:08: [irq 1]
[    0.331687] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.331706] pnp 00:09: [io  0x0060]
[    0.331708] pnp 00:09: [io  0x0064]
[    0.331714] pnp 00:09: [irq 12]
[    0.331758] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.331790] pnp: PnP ACPI: found 10 devices
[    0.331792] ACPI: ACPI bus type pnp unregistered
[    0.338851] PCI: max bus depth: 1 pci_try_num: 2
[    0.338906] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.338926] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.338935] pci 0000:00:1c.1:   bridge window [mem 0xe0400000-0xe04fffff]
[    0.338949] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.338957] pci 0000:00:1c.2:   bridge window [mem 0xe0500000-0xe05fffff]
[    0.338972] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.338976] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.338989] pci 0000:00:1c.3:   bridge window [mem 0xe0600000-0xe06fffff 64bit pref]
[    0.339013] pci 0000:00:1c.0: setting latency timer to 64
[    0.339038] pci 0000:00:1c.1: setting latency timer to 64
[    0.339055] pci 0000:00:1c.2: setting latency timer to 64
[    0.339070] pci 0000:00:1c.3: setting latency timer to 64
[    0.339076] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.339079] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.339081] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.339084] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.339087] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.339089] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.339092] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[    0.339095] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.339098] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.339100] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[    0.339103] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.339106] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.339108] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.339111] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[    0.339114] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
[    0.339116] pci_bus 0000:00: resource 19 [mem 0xafa00000-0xfebfffff]
[    0.339119] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff]
[    0.339122] pci_bus 0000:02: resource 1 [mem 0xe0400000-0xe04fffff]
[    0.339125] pci_bus 0000:03: resource 1 [mem 0xe0500000-0xe05fffff]
[    0.339128] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.339131] pci_bus 0000:04: resource 2 [mem 0xe0600000-0xe06fffff 64bit pref]
[    0.339209] NET: Registered protocol family 2
[    0.341565] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.342586] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.344172] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.344332] TCP: Hash tables configured (established 524288 bind 65536)
[    0.344335] TCP reno registered
[    0.344348] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.344373] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.344497] NET: Registered protocol family 1
[    0.344515] pci 0000:00:02.0: Boot video device
[    0.344718] PCI: CLS 64 bytes, default 64
[    0.344773] Unpacking initramfs...
[    0.651926] Freeing initrd memory: 10248k freed
[    0.653670] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.653676] Placing 64MB software IO TLB between ffff8800a8ed1000 - ffff8800aced1000
[    0.653679] software IO TLB at phys 0xa8ed1000 - 0xaced1000
[    0.654190] audit: initializing netlink socket (disabled)
[    0.654203] type=2000 audit(1416792884.528:1): initialized
[    0.677053] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.677749] VFS: Disk quotas dquot_6.5.2
[    0.677784] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.677883] msgmni has been set to 7802
[    0.678072] alg: No test for stdrng (krng)
[    0.678108] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.678112] io scheduler noop registered
[    0.678115] io scheduler deadline registered
[    0.678136] io scheduler cfq registered (default)
[    0.678235] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.678305] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.678415] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.678472] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.678578] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.678636] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.678735] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.678792] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.678928] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.678935] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.678968] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.678971] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.678978] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.679005] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.679009] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.679015] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.679043] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.679045] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.679052] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.679072] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.679098] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.679100] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.679409] intel_idle: MWAIT substates: 0x21120
[    0.679411] intel_idle: v0.4 model 0x3A
[    0.679413] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.679446] ERST: Table is not found!
[    0.679447] GHES: HEST is not enabled!
[    0.679511] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.730337] Linux agpgart interface v0.103
[    0.730442] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[    0.730502] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    0.731156] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    0.731292] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.731431] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.736742] i8042: Detected active multiplexing controller, rev 1.1
[    0.738153] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.738161] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.738197] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.738226] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.738253] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.738391] mousedev: PS/2 mouse device common for all mice
[    0.738446] rtc_cmos 00:07: RTC can wake from S4
[    0.738571] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.738605] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.738669] cpuidle: using governor ladder
[    0.738740] cpuidle: using governor menu
[    0.738956] TCP cubic registered
[    0.739069] NET: Registered protocol family 10
[    0.739704] Mobile IPv6
[    0.739707] NET: Registered protocol family 17
[    0.739711] Registering the dns_resolver key type
[    0.740080] PM: Hibernation image not present or could not be loaded.
[    0.740099] registered taskstats version 1
[    0.740790] rtc_cmos 00:07: setting system clock to 2014-11-24 01:34:44 UTC (1416792884)
[    0.740842] Initializing network drop monitor service
[    0.742332] Freeing unused kernel memory: 580k freed
[    0.742440] Write protecting the kernel read-only data: 6144k
[    0.745762] Freeing unused kernel memory: 648k freed
[    0.749272] Freeing unused kernel memory: 688k freed
[    0.763665] udevd[48]: starting version 175
[    0.779937] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.803482] usbcore: registered new interface driver usbfs
[    0.803728] usbcore: registered new interface driver hub
[    0.811995] SCSI subsystem initialized
[    0.819505] usbcore: registered new device driver usb
[    0.820210] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.820268] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.820274] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    0.820299] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.820333] ehci_hcd 0000:00:1a.0: debug port 2
[    0.824227] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    0.826635] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.826723] r8169 0000:04:00.0: setting latency timer to 64
[    0.827287] r8169 0000:04:00.0: irq 44 for MSI/MSI-X
[    0.828183] r8169 0000:04:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000640000, c4:54:44:1f:bd:17, XID 0c900800 IRQ 44
[    0.828188] r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.828645] ehci_hcd 0000:00:1a.0: irq 21, io mem 0xe0714800
[    0.841368] libata version 3.00 loaded.
[    0.842489] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.842518] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.842522] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.842524] usb usb1: Product: EHCI Host Controller
[    0.842527] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    0.842529] usb usb1: SerialNumber: 0000:00:1a.0
[    0.842668] hub 1-0:1.0: USB hub found
[    0.842674] hub 1-0:1.0: 3 ports detected
[    0.842800] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    0.842805] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.842814] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.842915] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.842980] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X
[    0.843046] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.843049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.843052] usb usb2: Product: xHCI Host Controller
[    0.843054] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[    0.843057] usb usb2: SerialNumber: 0000:00:14.0
[    0.843148] xHCI xhci_add_endpoint called for root hub
[    0.843150] xHCI xhci_check_bandwidth called for root hub
[    0.843185] hub 2-0:1.0: USB hub found
[    0.843193] hub 2-0:1.0: 4 ports detected
[    0.843265] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.843273] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.843294] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    0.843297] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.843300] usb usb3: Product: xHCI Host Controller
[    0.843302] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[    0.843305] usb usb3: SerialNumber: 0000:00:14.0
[    0.843383] xHCI xhci_add_endpoint called for root hub
[    0.843385] xHCI xhci_check_bandwidth called for root hub
[    0.843416] hub 3-0:1.0: USB hub found
[    0.843425] hub 3-0:1.0: 4 ports detected
[    0.854159] ahci 0000:00:1f.2: version 3.0
[    0.854251] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[    0.854386] ahci: SSS flag set, parallel bus scan disabled
[    0.854420] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
[    0.854425] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    0.854432] ahci 0000:00:1f.2: setting latency timer to 64
[    0.855856] scsi0 : ahci
[    0.856048] scsi1 : ahci
[    0.856123] scsi2 : ahci
[    0.856593] scsi3 : ahci
[    0.857172] scsi4 : ahci
[    0.858605] scsi5 : ahci
[    0.858759] ata1: SATA max UDMA/133 abar m2048@0xe0714000 port 0xe0714100 irq 46
[    0.858764] ata2: SATA max UDMA/133 abar m2048@0xe0714000 port 0xe0714180 irq 46
[    0.858767] ata3: DUMMY
[    0.858768] ata4: DUMMY
[    0.858770] ata5: DUMMY
[    0.858772] ata6: DUMMY
[    0.858868] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.858873] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    0.858887] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    0.858921] ehci_hcd 0000:00:1d.0: debug port 2
[    0.862817] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    0.862840] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xe0714c00
[    0.877870] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.877902] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    0.877905] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.877908] usb usb4: Product: EHCI Host Controller
[    0.877911] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    0.877913] usb usb4: SerialNumber: 0000:00:1d.0
[    0.878134] hub 4-0:1.0: USB hub found
[    0.878141] hub 4-0:1.0: 3 ports detected
[    0.965417] thermal LNXTHERM:00: registered as thermal_zone0
[    0.965422] ACPI: Thermal Zone [THRM] (46 C)
[    1.153788] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.177766] ata1: SATA link down (SStatus 0 SControl 300)
[    1.286093] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.286098] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.286519] hub 1-1:1.0: USB hub found
[    1.286727] hub 1-1:1.0: 6 ports detected
[    1.453678] usb 2-4: new high-speed USB device number 2 using xhci_hcd
[    1.481149] usb 2-4: New USB device found, idVendor=5986, idProduct=0299
[    1.481154] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.481157] usb 2-4: Product: Integrated Camera
[    1.481160] usb 2-4: Manufacturer: Vimicro corp.
[    1.497664] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.498043] ata2.00: ATA-9: SanDisk SSD U100 16GB, 10.56.01, max UDMA/133
[    1.498048] ata2.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    1.498534] ata2.00: configured for UDMA/133
[    1.498777] scsi 1:0:0:0: Direct-Access     ATA      SanDisk SSD U100 10.5 PQ: 0 ANSI: 5
[    1.504482] sd 1:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    1.504551] sd 1:0:0:0: [sda] Write Protect is off
[    1.504555] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.504576] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.505568]  sda: sda1 sda2
[    1.506038] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.508113] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.593637] usb 4-1: new high-speed USB device number 2 using ehci_hcd
[    1.649606] Refined TSC clocksource calibration: 1496.600 MHz.
[    1.649612] Switching to clocksource tsc
[    1.725952] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[    1.725957] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.726703] hub 4-1:1.0: USB hub found
[    1.726795] hub 4-1:1.0: 8 ports detected
[    1.769475] PM: Starting manual resume from disk
[    1.769480] PM: Hibernation image partition 8:2 present
[    1.769482] PM: Looking for hibernation image.
[    1.769836] PM: Image not found (code -22)
[    1.769839] PM: Hibernation image not present or could not be loaded.
[    1.781352] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.997583] usb 4-1.5: new full-speed USB device number 3 using ehci_hcd
[    2.091300] usb 4-1.5: string descriptor 0 read error: -22
[    2.091361] usb 4-1.5: New USB device found, idVendor=0cf3, idProduct=3004
[    2.091364] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.148710] udevd[330]: starting version 175
[    2.284054] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    2.286086] ACPI: Lid Switch [LID0]
[    2.286178] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    2.286185] ACPI: Power Button [PWRB]
[    2.286257] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.286261] ACPI: Power Button [PWRF]
[    2.286682] ACPI: Requesting acpi_cpufreq
[    2.289190] iTCO_vendor_support: vendor-support=0
[    2.294218] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    2.294322] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[    2.295249] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.306872] [drm] Initialized drm 1.1.0 20060810
[    2.307903] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    2.307911] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.335484] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[    2.336375] Initializing Realtek PCIE storage driver...
[    2.342704] cfg80211: Calling CRDA to update world regulatory domain
[    2.351033] Resource length: 0x1000
[    2.351058] Original address: 0xe0500000, remapped address: 0xffffc90000648000
[    2.351063] pci->irq = 18
[    2.351066] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
[    2.351125] rts_pstor 0000:03:00.0: setting latency timer to 64
[    2.354529] i915 0000:00:02.0: setting latency timer to 64
[    2.377741] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    2.412535] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[    2.412547] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.412550] [drm] Driver supports precise vblank timestamp query.
[    2.413146] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.492030] ACPI: Battery Slot [BATX] (battery present)
[    2.494421] ACPI: AC Adapter [AC] (on-line)
[    2.496437] Bluetooth: Core ver 2.16
[    2.496456] NET: Registered protocol family 31
[    2.496458] Bluetooth: HCI device and connection manager initialized
[    2.496462] Bluetooth: HCI socket layer initialized
[    2.496464] Bluetooth: L2CAP socket layer initialized
[    2.496475] Bluetooth: SCO socket layer initialized
[    2.498476] ath9k 0000:02:00.0: setting latency timer to 64
[    2.498630] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    2.498676] usbcore: registered new interface driver btusb
[    2.501507] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[    2.512443] ath: EEPROM regdomain: 0x6a
[    2.512446] ath: EEPROM indicates we should expect a direct regpair map
[    2.512450] ath: Country alpha2 being used: 00
[    2.512452] ath: Regpair used: 0x6a
[    2.520073] usb 4-1.5: firmware: agent aborted loading ar3k/AthrBT_0x11020000.dfu (not found?)
[    2.520183] Bluetooth: Loading patch file failed
[    2.520256] ath3k: probe of 4-1.5:1.0 failed with error -2
[    2.520288] usbcore: registered new interface driver ath3k
[    2.529309] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    2.529946] Registered led device: ath9k-phy0
[    2.529954] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90015980000, irq=17
[    2.530039] Linux media interface: v0.10
[    2.536096] Linux video capture interface: v2.00
[    2.539494] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0299)
[    2.540704] cfg80211: World regulatory domain updated:
[    2.540708] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    2.540712] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    2.540715] cfg80211:     (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    2.540718] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[    2.540721] cfg80211:     (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm)
[    2.540724] cfg80211:     (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm)
[    2.540727] cfg80211:     (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
[    2.540729] cfg80211:     (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    2.540733] cfg80211:     (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[    2.546910] input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/input/input6
[    2.547055] usbcore: registered new interface driver uvcvideo
[    2.547058] USB Video Class driver (1.1.1)
[    2.554145] scsi6 : SCSI emulation for PCI-Express Mass Storage devices
[    2.554256] rts_pstor: waiting for device to settle before scanning
[    2.751804] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    3.000891] fbcon: inteldrmfb (fb0) is primary device
[    3.212809] Console: switching to colour frame buffer device 170x48
[    3.224022] fb0: inteldrmfb frame buffer device
[    3.224027] drm: registered panic notifier
[    3.224057] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.224238] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[    3.224285] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    3.479314] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x123c00
[    3.479340] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[    3.521797] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[    3.553205] rts_pstor: device scan complete
[    3.553472] scsi 6:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[    3.553579] Bad LUN (0:1)
[    3.553823] Bad target number (1:0)
[    3.554493] Bad target number (2:0)
[    3.554792] Bad target number (3:0)
[    3.555014] Bad target number (4:0)
[    3.555219] Bad target number (5:0)
[    3.555362] Bad target number (6:0)
[    3.555500] Bad target number (7:0)
[    3.556637] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    3.556806] sd 6:0:0:0: Attached scsi generic sg1 type 0
[    3.783727] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[    3.793036] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[    3.793315] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    3.793703] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    3.793852] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    4.359395] Adding 3919868k swap on /dev/sda2.  Priority:-1 extents:1 across:3919868k SS
[    4.390971] EXT4-fs (sda1): re-mounted. Opts: (null)
[    4.461865] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    4.500860] loop: module loaded
[    5.812723] RPC: Registered named UNIX socket transport module.
[    5.812730] RPC: Registered udp transport module.
[    5.812734] RPC: Registered tcp transport module.
[    5.812738] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.832384] FS-Cache: Loaded
[    5.844720] FS-Cache: Netfs 'nfs' registered for caching
[    5.856558] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    6.593532] vboxdrv: Found 2 processor cores.
[    6.595201] vboxdrv: fAsync=0 offMin=0x1b9 offMax=0x116b
[    6.595294] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[    6.595297] vboxdrv: Successfully loaded version 4.1.18_Debian (interface 0x00190000).
[    6.659981] vboxpci: IOMMU not found (not registered)
[    7.106492] Bluetooth: RFCOMM TTY layer initialized
[    7.106499] Bluetooth: RFCOMM socket layer initialized
[    7.106501] Bluetooth: RFCOMM ver 1.11
[    7.107041] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.107044] Bluetooth: BNEP filters: protocol multicast
[    7.251511] lp: driver loaded but no devices found
[    7.258135] ppdev: user-space parallel port driver
[    7.306081] r8169 0000:04:00.0: firmware: agent loaded rtl_nic/rtl8168e-3.fw into memory
[    7.400726] r8169 0000:04:00.0: eth0: link down
[    7.400736] r8169 0000:04:00.0: eth0: link down
[    7.401564] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.481320] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[    9.739337] r8169 0000:04:00.0: eth0: link up
[    9.740152] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   10.191462] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   10.430565] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input13
[   19.939814] eth0: no IPv6 routers present