[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.19.0-trunk-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 3.19-1~exp1 (2015-02-12)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7c54fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c7c55000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.2-916-gc7b2b7c 01/23/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF8000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000021f000000 aka 8688M
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] found SMP MP-table at [mem 0x000f5c70-0x000f5c7f] mapped at [c00f5c70]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01dfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
[    0.000000]  [mem 0x37600000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20000000-0x375fffff]
[    0.000000]  [mem 0x20000000-0x375fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff]
[    0.000000]  [mem 0x37800000-0x379fdfff] page 4k
[    0.000000] BRK [0x017ee000, 0x017eefff] PGTABLE
[    0.000000] BRK [0x017ef000, 0x017f0fff] PGTABLE
[    0.000000] BRK [0x017f1000, 0x017f1fff] PGTABLE
[    0.000000] BRK [0x017f2000, 0x017f2fff] PGTABLE
[    0.000000] log_buf_len: 2097152 bytes
[    0.000000] early log buf free: 127956(97%)
[    0.000000] RAMDISK: [mem 0x35c0c000-0x36dfdfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000F5E70 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0xC7C700E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0xC7C72740 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0xC7C70280 0024B8 (v02 ASROCK COREBOOT 00010001 INTL 20160108)
[    0.000000] ACPI: FACS 0xC7C70240 000040
[    0.000000] ACPI: SSDT 0xC7C72840 000046 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0xC7C72890 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0xC7C728D0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HEST 0xC7C72930 000028 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 0xC7C72960 00168E (v02 AMD    ALIB     00000001 MSFT 04000000)
[    0.000000] ACPI: SSDT 0xC7C73FF0 0003DE (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: HPET 0xC7C743D0 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 7798MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x379fdfff]
[    0.000000]   HighMem  [mem 0x379fe000-0x1effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xc7c54fff]
[    0.000000]   node   0: [mem 0x00000000-0x1effffff]
[    0.000000] Initmem setup node 0 [mem 0x00001000-0x1effffff]
[    0.000000] On node 0 totalpages: 1993715
[    0.000000] free_area_init_node: node 0, pgdat c16a9740, node_mem_map f0fb0024
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1967 pages used for memmap
[    0.000000]   Normal zone: 223742 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1765975 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 17 pages/cpu @f77c9000 s40064 r0 d29568 u69632
[    0.000000] pcpu-alloc: s40064 r0 d29568 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1991712
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.19.0-trunk-686-pae root=/dev/mapper/speicher-root ro init=/sbin/init drm_kms_helper.poll=0 drm.debug=0x06 log_buf_len=2M quiet noisapnp console=ttyS0,115200 console=tty0 pcie_aspm=force pcie_aspm.policy=powersave radeon.dpm=1
[    0.000000] PCIe ASPM is forcibly enabled
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0021f000)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 7867032K/7974860K available (4828K kernel code, 581K rwdata, 1484K rodata, 660K init, 468K bss, 107828K reserved, 0K cma-reserved, 7063900K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
                   pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
                   vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
                     .init : 0xc16bf000 - 0xc1764000   ( 660 kB)
                     .data : 0xc14b76c6 - 0xc16bd500   (2071 kB)
                     .text : 0xc1000000 - 0xc14b76c6   (4829 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:440 16
[    0.000000] CPU 0 irqstacks, hard=f702a000 soft=f702c000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1600.049 MHz processor
[    0.000056] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.09 BogoMIPS (lpj=6400196)
[    0.000063] pid_max: default: 32768 minimum: 301
[    0.000082] ACPI: Core revision 20141107
[    0.006293] ACPI: All ACPI Tables successfully acquired
[    0.006346] Security Framework initialized
[    0.006366] AppArmor: AppArmor disabled by boot time parameter
[    0.006369] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.006404] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.006409] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.006797] Initializing cgroup subsys memory
[    0.006809] Initializing cgroup subsys devices
[    0.006816] Initializing cgroup subsys freezer
[    0.006822] Initializing cgroup subsys net_cls
[    0.006830] Initializing cgroup subsys blkio
[    0.006835] Initializing cgroup subsys perf_event
[    0.006841] Initializing cgroup subsys net_prio
[    0.006884] CPU: Physical Processor ID: 0
[    0.006887] CPU: Processor Core ID: 0
[    0.006892] mce: CPU supports 6 MCE banks
[    0.006912] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
               Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.007204] Freeing SMP alternatives memory: 20K (c1764000 - c1769000)
[    0.009253] ftrace: allocating 21223 entries in 42 pages
[    0.028714] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.029143] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.068835] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
[    0.176346] Performance Events: AMD PMU driver.
[    0.176356] ... version:                0
[    0.176359] ... bit width:              48
[    0.176361] ... generic registers:      4
[    0.176364] ... value mask:             0000ffffffffffff
[    0.176367] ... max period:             00007fffffffffff
[    0.176370] ... fixed-purpose events:   0
[    0.176372] ... event mask:             000000000000000f
[    0.177428] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.177612] CPU 1 irqstacks, hard=f7128000 soft=f712a000
[    0.177616] x86: Booting SMP configuration:
[    0.177620] .... node  #0, CPUs:      #1
[    0.188625] Initializing CPU#1
[    0.190792] x86: Booted up 1 node, 2 CPUs
[    0.190797] smpboot: Total of 2 processors activated (6400.19 BogoMIPS)
[    0.191768] devtmpfs: initialized
[    0.192844] pinctrl core: initialized pinctrl subsystem
[    0.193128] NET: Registered protocol family 16
[    0.207029] cpuidle: using governor ladder
[    0.219030] cpuidle: using governor menu
[    0.219425] ACPI: bus type PCI registered
[    0.219431] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.219860] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.219864] bios32_service(0x49435024): not present
[    0.219867] PCI: Using configuration type 1 for base access
[    0.219870] PCI: Using configuration type 1 for extended access
[    0.232428] ACPI: Added _OSI(Module Device)
[    0.232437] ACPI: Added _OSI(Processor Device)
[    0.232440] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.232443] ACPI: Added _OSI(Processor Aggregator Device)
[    0.234601] ACPI: Executed 2 blocks of module-level executable AML code
[    0.238980] ACPI: Interpreter enabled
[    0.239003] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[    0.239029] ACPI: (supports S0 S1 S3 S4 S5)
[    0.239033] ACPI: Using IOAPIC for interrupt routing
[    0.239066] HEST: Table parsing has been initialized.
[    0.239073] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.246015] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.246030] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.246184] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.246749] PCI host bridge to bus 0000:00
[    0.246757] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.246762] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.246767] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.246771] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.246776] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[    0.246801] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[    0.247003] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[    0.247023] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.247034] pci 0000:00:01.0: reg 0x14: [io  0x2000-0x20ff]
[    0.247046] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff]
[    0.247117] pci 0000:00:01.0: supports D1 D2
[    0.247204] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.247295] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[    0.247312] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff]
[    0.247394] pci 0000:00:01.1: supports D1 D2
[    0.247481] pci 0000:00:01.1: System wakeup disabled by ACPI
[    0.247672] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.247700] pci 0000:00:11.0: reg 0x10: [io  0x2410-0x2417]
[    0.247715] pci 0000:00:11.0: reg 0x14: [io  0x2420-0x2423]
[    0.247730] pci 0000:00:11.0: reg 0x18: [io  0x2418-0x241f]
[    0.247744] pci 0000:00:11.0: reg 0x1c: [io  0x2424-0x2427]
[    0.247759] pci 0000:00:11.0: reg 0x20: [io  0x2400-0x240f]
[    0.247773] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff]
[    0.248054] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.248075] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff]
[    0.248232] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.248393] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.248421] pci 0000:00:12.2: reg 0x10: [mem 0xf014c000-0xf014c0ff]
[    0.248537] pci 0000:00:12.2: supports D1 D2
[    0.248541] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.248631] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.248760] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.248781] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff]
[    0.248938] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.249101] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.249128] pci 0000:00:13.2: reg 0x10: [mem 0xf014d000-0xf014d0ff]
[    0.249244] pci 0000:00:13.2: supports D1 D2
[    0.249248] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.249337] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.249497] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.249770] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.249801] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit]
[    0.249896] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.250129] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.250433] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.250569] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.250721] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.250741] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff]
[    0.250906] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.251065] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    0.251176] pci 0000:00:15.0: supports D1 D2
[    0.251270] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.251426] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[    0.251544] pci 0000:00:15.1: supports D1 D2
[    0.251639] pci 0000:00:15.1: System wakeup disabled by ACPI
[    0.251768] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[    0.251945] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[    0.252116] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[    0.252289] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[    0.252482] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[    0.252653] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[    0.252824] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[    0.252993] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[    0.253354] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[    0.253370] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.253374] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.253379] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.253383] pci 0000:00:14.4:   bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[    0.253490] pci 0000:00:15.0: PCI bridge to [bus 02]
[    0.253709] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.253739] pci 0000:03:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.253779] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.253806] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.253942] pci 0000:03:00.0: supports D1 D2
[    0.253946] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.263107] pci 0000:00:15.1: PCI bridge to [bus 03]
[    0.263126] pci 0000:00:15.1:   bridge window [io  0x1000-0x1fff]
[    0.263141] pci 0000:00:15.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.263184] pci_bus 0000:00: on NUMA node 0
[    0.264181] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.264425] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.264596] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.264735] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.264833] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.265009] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
[    0.265180] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.265354] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.265612] ACPI: Enabled 6 GPEs in block 00 to 1F
[    0.266056] vgaarb: setting as boot device: PCI:0000:00:01.0
[    0.266066] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.266078] vgaarb: loaded
[    0.266081] vgaarb: bridge control possible 0000:00:01.0
[    0.266406] PCI: Using ACPI for IRQ routing
[    0.266419] PCI: pci_cache_line_size set to 64 bytes
[    0.266576] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.266582] e820: reserve RAM buffer [mem 0xc7c55000-0xc7ffffff]
[    0.266585] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[    0.267075] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.267083] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.269244] Switched to clocksource hpet
[    0.280495] pnp: PnP ACPI init
[    0.280967] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.281303] pnp: PnP ACPI: found 1 devices
[    0.281313] PnPBIOS: Disabled by ACPI PNP
[    0.326117] pci 0000:00:14.4: PCI bridge to [bus 01]
[    0.326143] pci 0000:00:15.0: PCI bridge to [bus 02]
[    0.326161] pci 0000:00:15.1: PCI bridge to [bus 03]
[    0.326167] pci 0000:00:15.1:   bridge window [io  0x1000-0x1fff]
[    0.326180] pci 0000:00:15.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.326191] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.326196] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.326201] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.326205] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[    0.326210] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.326214] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.326218] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.326222] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff]
[    0.326227] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.326231] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.326402] NET: Registered protocol family 2
[    0.326799] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.326851] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.326888] TCP: Hash tables configured (established 8192 bind 8192)
[    0.326938] TCP: reno registered
[    0.326943] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.326954] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.327149] NET: Registered protocol family 1
[    0.327182] pci 0000:00:01.0: Video device with shadowed ROM
[    0.383642] PCI: CLS 64 bytes, default 64
[    0.383765] Unpacking initramfs...
[    1.108089] Freeing initrd memory: 18376K (f5c0c000 - f6dfe000)
[    1.108821] microcode: CPU0: patch_level=0x05000119
[    1.108948] microcode: CPU1: patch_level=0x05000119
[    1.109353] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.109373] LVT offset 0 assigned for vector 0x400
[    1.109408] perf: AMD IBS detected (0x000000ff)
[    1.110342] futex hash table entries: 512 (order: 3, 32768 bytes)
[    1.110475] audit: initializing netlink subsys (disabled)
[    1.110517] audit: type=2000 audit(1453574623.000:1): initialized
[    1.111341] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.111385] zpool: loaded
[    1.111691] VFS: Disk quotas dquot_6.5.2
[    1.111810] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.113601] alg: No test for stdrng (krng)
[    1.113661] bounce: pool size: 64 pages
[    1.113793] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.113922] io scheduler noop registered
[    1.113929] io scheduler deadline registered
[    1.113952] io scheduler cfq registered (default)
[    1.115212] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[    1.115221] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[    1.115257] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[    1.115262] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.115270] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[    1.115287] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.115329] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.115443] GHES: Failed to enable APEI firmware first mode.
[    1.115455] isapnp: ISA Plug & Play support disabled
[    1.115806] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.136553] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.138129] Linux agpgart interface v0.103
[    1.138556] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.142237] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.142258] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.143085] mousedev: PS/2 mouse device common for all mice
[    1.143310] rtc_cmos 00:00: RTC can wake from S4
[    1.143763] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    1.143883] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[    1.143924] ledtrig-cpu: registered to indicate activity on CPUs
[    1.144259] TCP: cubic registered
[    1.144429] NET: Registered protocol family 10
[    1.145039] mip6: Mobile IPv6
[    1.145053] NET: Registered protocol family 17
[    1.145063] mpls_gso: MPLS GSO support
[    1.145678] Using IPI No-Shortcut mode
[    1.146339] registered taskstats version 1
[    1.147224] rtc_cmos 00:00: setting system clock to 2016-01-23 18:43:43 UTC (1453574623)
[    1.147327] PM: Hibernation image not present or could not be loaded.
[    1.147906] Freeing unused kernel memory: 660K (c16bf000 - c1764000)
[    1.148069] Write protecting the kernel text: 4832k
[    1.148207] Write protecting the kernel read-only data: 1488k
[    1.148209] NX-protecting the kernel data: 3360k
[    1.292998] systemd-udevd[65]: starting version 215
[    1.294161] random: systemd-udevd urandom read with 0 bits of entropy available
[    1.312746] ACPI: bus type USB registered
[    1.312813] usbcore: registered new interface driver usbfs
[    1.312839] usbcore: registered new interface driver hub
[    1.319083] SCSI subsystem initialized
[    1.320666] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    1.320791] sp5100_tco: PCI Revision ID: 0x42
[    1.320906] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[    1.320920] sp5100_tco: Last reboot was not triggered by watchdog.
[    1.321016] sp5100_tco: initialized (0xf8210b00). heartbeat=60 sec (nowayout=0)
[    1.323309] usbcore: registered new device driver usb
[    1.324321] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.324985] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.326901] libata version 3.00 loaded.
[    1.328361] ahci 0000:00:11.0: version 3.0
[    1.328424] ehci-pci: EHCI PCI platform driver
[    1.328970] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.328978] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part 
[    1.331990] scsi host0: ahci
[    1.332180] scsi host1: ahci
[    1.332972] scsi host2: ahci
[    1.333204] scsi host3: ahci
[    1.333492] scsi host4: ahci
[    1.333732] scsi host5: ahci
[    1.333928] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19
[    1.333934] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19
[    1.333938] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19
[    1.333943] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19
[    1.333948] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19
[    1.333952] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19
[    1.334562] QUIRK: Enable AMD PLL fix
[    1.334685] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.334701] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.334721] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.334806] ehci-pci 0000:00:12.2: debug port 1
[    1.334880] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014c000
[    1.340933] thermal LNXTHERM:00: registered as thermal_zone0
[    1.340942] ACPI: Thermal Zone [TZ00] (33 C)
[    1.345473] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.345662] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.345672] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.345677] usb usb1: Product: EHCI Host Controller
[    1.345681] usb usb1: Manufacturer: Linux 3.19.0-trunk-686-pae ehci_hcd
[    1.345685] usb usb1: SerialNumber: 0000:00:12.2
[    1.346371] hub 1-0:1.0: USB hub found
[    1.346390] hub 1-0:1.0: 5 ports detected
[    1.347143] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.347157] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.347166] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.347183] ehci-pci 0000:00:13.2: debug port 1
[    1.347239] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014d000
[    1.349234] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.350392] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xf8226000, bc:5f:f4:c8:d3:98, XID 0c200000 IRQ 26
[    1.350399] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.357372] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.357536] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.357541] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.357546] usb usb2: Product: EHCI Host Controller
[    1.357551] usb usb2: Manufacturer: Linux 3.19.0-trunk-686-pae ehci_hcd
[    1.357555] usb usb2: SerialNumber: 0000:00:13.2
[    1.357882] hub 2-0:1.0: USB hub found
[    1.357900] hub 2-0:1.0: 5 ports detected
[    1.358762] ohci-pci: OHCI PCI platform driver
[    1.359147] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.359162] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.359224] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000
[    1.417763] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.417773] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.417777] usb usb3: Product: OHCI PCI host controller
[    1.417782] usb usb3: Manufacturer: Linux 3.19.0-trunk-686-pae ohci_hcd
[    1.417786] usb usb3: SerialNumber: 0000:00:12.0
[    1.418396] hub 3-0:1.0: USB hub found
[    1.418421] hub 3-0:1.0: 5 ports detected
[    1.419062] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.419076] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[    1.419124] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000
[    1.477702] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.477711] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.477716] usb usb4: Product: OHCI PCI host controller
[    1.477721] usb usb4: Manufacturer: Linux 3.19.0-trunk-686-pae ohci_hcd
[    1.477725] usb usb4: SerialNumber: 0000:00:13.0
[    1.478343] hub 4-0:1.0: USB hub found
[    1.478377] hub 4-0:1.0: 5 ports detected
[    1.479040] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.479053] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[    1.479102] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000
[    1.537697] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.537707] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.537712] usb usb5: Product: OHCI PCI host controller
[    1.537716] usb usb5: Manufacturer: Linux 3.19.0-trunk-686-pae ohci_hcd
[    1.537720] usb usb5: SerialNumber: 0000:00:14.5
[    1.538335] hub 5-0:1.0: USB hub found
[    1.538360] hub 5-0:1.0: 2 ports detected
[    1.653674] ata6: SATA link down (SStatus 0 SControl 300)
[    1.653726] ata3: SATA link down (SStatus 0 SControl 300)
[    1.653769] ata5: SATA link down (SStatus 0 SControl 300)
[    1.653800] ata1: SATA link down (SStatus 0 SControl 300)
[    1.653831] ata2: SATA link down (SStatus 0 SControl 300)
[    1.669668] usb 2-2: new high-speed USB device number 2 using ehci-pci
[    1.819485] usb 2-2: New USB device found, idVendor=148f, idProduct=2870
[    1.819497] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.819501] usb 2-2: Product: 802.11 n WLAN
[    1.819506] usb 2-2: Manufacturer: Ralink
[    1.825461] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.831622] ata4.00: ATA-8: WDC WD20EARS-60MVWB0, 51.0AB51, max UDMA/100
[    1.831633] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.838411] ata4.00: configured for UDMA/100
[    1.838903] scsi 3:0:0:0: Direct-Access     ATA      WDC WD20EARS-60M AB51 PQ: 0 ANSI: 5
[    1.847599] sd 3:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    1.847608] sd 3:0:0:0: [sda] 4096-byte physical blocks
[    1.847709] sd 3:0:0:0: [sda] Write Protect is off
[    1.847715] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.847759] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.858640]  sda: sda1 sda2
[    1.859828] sd 3:0:0:0: [sda] Attached SCSI disk
[    1.861010] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    1.861348] usb 3-1: new low-speed USB device number 2 using ohci-pci
[    2.032785] usb 3-1: New USB device found, idVendor=046d, idProduct=c312
[    2.032802] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.032811] usb 3-1: Product: USB Multimedia Keyboard
[    2.032819] usb 3-1: Manufacturer: LITEON Technology
[    2.037359] hidraw: raw HID events driver (C) Jiri Kosina
[    2.044119] usbcore: registered new interface driver usbhid
[    2.044126] usbhid: USB HID core driver
[    2.046391] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:046D:C312.0001/input/input2
[    2.101931] hid-generic 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:12.0-1/input0
[    2.105629] tsc: Refined TSC clocksource calibration: 1599.999 MHz
[    2.162526] md: bind<sda2>
[    2.166844] md: raid1 personality registered for level 1
[    2.167708] md/raid1:md1: active with 1 out of 2 mirrors
[    2.167766] md1: detected capacity change from 0 to 1999886286848
[    2.168888]  md1: unknown partition table
[    2.169118] md: bind<sda1>
[    2.172913] md/raid1:md0: active with 1 out of 2 mirrors
[    2.172970] md0: detected capacity change from 0 to 509804544
[    2.174001]  md0: unknown partition table
[    2.281296] device-mapper: uevent: version 1.0.3
[    2.281545] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[    2.297451] usb 3-2: new full-speed USB device number 3 using ohci-pci
[    2.462788] usb 3-2: New USB device found, idVendor=1b1a, idProduct=7001
[    2.462804] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.462813] usb 3-2: Product:  USB  Mouse 
[    2.469549] input:  USB  Mouse  as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1B1A:7001.0002/input/input3
[    2.469735] hid-generic 0003:1B1A:7001.0002: input,hidraw1: USB HID v1.10 Mouse [ USB  Mouse ] on usb-0000:00:12.0-2/input0
[    2.475000] input:  USB  Mouse  as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:1B1A:7001.0003/input/input4
[    2.530037] hid-generic 0003:1B1A:7001.0003: input,hidraw2: USB HID v1.10 Keyboard [ USB  Mouse ] on usb-0000:00:12.0-2/input1
[    3.105950] Switched to clocksource tsc
[    6.708985] random: nonblocking pool is initialized
[   13.983244] NET: Registered protocol family 38
[   15.741268] raid6: mmxx1      622 MB/s
[   15.809273] raid6: mmxx2     1041 MB/s
[   15.877331] raid6: sse1x1     621 MB/s
[   15.945249] raid6: sse1x2    1012 MB/s
[   16.013256] raid6: sse2x1    1061 MB/s
[   16.081242] raid6: sse2x2    1479 MB/s
[   16.081245] raid6: using algorithm sse2x2 (1479 MB/s)
[   16.081249] raid6: using ssse3x1 recovery algorithm
[   16.081923] xor: measuring software checksum speed
[   16.121233]    pIII_sse  :  3226.000 MB/sec
[   16.161233]    prefetch64-sse:  3451.000 MB/sec
[   16.161236] xor: using function: prefetch64-sse (3451.000 MB/sec)
[   16.293799] Btrfs loaded
[   17.234783] PM: Starting manual resume from disk
[   17.234797] PM: Hibernation image partition 253:2 present
[   17.234800] PM: Looking for hibernation image.
[   17.235416] PM: Image not found (code -22)
[   17.235429] PM: Hibernation image not present or could not be loaded.
[   18.024619] EXT4-fs (dm-1): mounting ext3 file system using the ext4 subsystem
[   18.060432] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[   19.241745] EXT4-fs (dm-3): mounting ext3 file system using the ext4 subsystem
[   19.316404] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[   21.313018] systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   21.313411] systemd[1]: Detected architecture x86.
[   21.325616] systemd[1]: Set hostname to <mattotaupa>.
[   23.324783] systemd[1]: rpcbind.target: Dependency Before=rpcbind.target dropped
[   23.716133] systemd[1]: Listening on Syslog Socket.
[   23.716310] systemd[1]: Reached target User and Group Name Lookups.
[   23.716406] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   23.716508] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   23.716584] systemd[1]: Listening on udev Control Socket.
[   23.716863] systemd[1]: Created slice User and Session Slice.
[   23.716960] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   23.717056] systemd[1]: Listening on LVM2 metadata daemon socket.
[   23.717118] systemd[1]: Listening on LVM2 poll daemon socket.
[   23.717187] systemd[1]: Listening on udev Kernel Socket.
[   23.718325] systemd[1]: Unmounting /usr...
[   23.718581] systemd[1]: Listening on Journal Socket (/dev/log).
[   23.718728] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   23.719198] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   23.719419] systemd[1]: Listening on Journal Audit Socket.
[   23.719466] systemd[1]: Reached target Remote File Systems (Pre).
[   23.719527] systemd[1]: Reached target Remote File Systems.
[   24.045295] systemd[1]: usr.mount: Mount process exited, code=exited status=32
[   24.045338] systemd[1]: Failed unmounting /usr.
[   24.050765] systemd[1]: Created slice System Slice.
[   24.051485] systemd[1]: Created slice system-tor.slice.
[   24.051885] systemd[1]: Reached target Slices.
[   24.052427] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   24.052967] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[   24.053562] systemd[1]: Created slice system-getty.slice.
[   24.053942] systemd[1]: Stopped File System Check on /dev/mapper/speicher-usr.
[   24.054481] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   24.054928] systemd[1]: Listening on fsck to fsckd communication Socket.
[   24.055384] systemd[1]: Listening on Journal Socket.
[   24.056822] systemd[1]: Mounting POSIX Message Queue File System...
[   24.059218] systemd[1]: Mounting Huge Pages File System...
[   24.060986] systemd[1]: Mounting Debug File System...
[   24.187987] systemd[1]: Starting Load Kernel Modules...
[   24.263237] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[   24.264484] systemd[1]: Mounting Temporary Directory...
[   24.266278] systemd[1]: Starting LSB: setup for pidentd...
[   24.268010] systemd[1]: Starting LSB: Set keymap...
[   24.269885] systemd[1]: Starting LSB: Set console font and keymap...
[   24.337511] systemd[1]: Starting Journal Service...
[   24.339227] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   24.341104] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   24.343495] systemd[1]: Mounted Debug File System.
[   24.344009] systemd[1]: Mounted Huge Pages File System.
[   24.344408] systemd[1]: Mounted POSIX Message Queue File System.
[   24.344826] systemd[1]: Mounted Temporary Directory.
[   24.722839] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   24.725046] systemd[1]: Starting Create Static Device Nodes in /dev...
[   25.335427] loop: module loaded
[   25.424795] systemd[1]: Started LSB: Set keymap.
[   25.584820] nct6775: Found NCT6775F or compatible chip at 0x2e:0x290
[   25.587352] systemd[1]: Started Load Kernel Modules.
[   25.589657] systemd[1]: Starting Apply Kernel Variables...
[   25.606642] systemd[1]: Started LVM2 metadata daemon.
[   25.860335] systemd[1]: Started LSB: setup for pidentd.
[   25.901889] Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
[   25.903627] systemd[1]: Started Apply Kernel Variables.
[   26.019635] systemd[1]: Started Create Static Device Nodes in /dev.
[   26.021496] systemd[1]: Starting udev Kernel Device Manager...
[   26.067646] systemd[1]: Started Journal Service.
[   29.185177] EXT4-fs (dm-3): re-mounted. Opts: (null)
[   29.185196] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[   29.756691] ACPI: acpi_idle registered with cpuidle
[   29.821658] acpi-cpufreq: overriding BIOS provided _PSD data
[   29.957373] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[   29.957388] ACPI: Power Button [PWRB]
[   29.957501] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   29.957507] ACPI: Power Button [PWRF]
[   30.191410] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   30.318154] piix4_smbus 0000:00:14.0: SMBus base address index region 0xcd6 already in use!
[   30.326776] piix4_smbus: probe of 0000:00:14.0 failed with error -16
[   30.417440] r8169 0000:03:00.0 eth6: renamed from eth0
[   30.659626] [drm] Initialized drm 1.1.0 20060810
[   31.429050] [drm] radeon kernel modesetting enabled.
[   31.561815] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
[   31.561874] [drm] register mmio base: 0xF0100000
[   31.561880] [drm] register mmio size: 262144
[   31.562027] ATOM BIOS: AMD
[   31.562139] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[   31.562150] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[   31.562158] [drm] Detected VRAM RAM=384M, BAR=256M
[   31.562164] [drm] RAM width 32bits DDR
[   31.562323] [TTM] Zone  kernel: Available graphics memory: 411094 kiB
[   31.562329] [TTM] Zone highmem: Available graphics memory: 3943044 kiB
[   31.562334] [TTM] Initializing pool allocator
[   31.562355] [TTM] Initializing DMA pool allocator
[   31.562428] [drm] radeon: 384M of VRAM memory ready
[   31.562436] [drm] radeon: 1024M of GTT memory ready.
[   31.562477] [drm] Loading PALM Microcode
[   31.580675] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[   31.755469] sound hdaudioC1D0: ALC892: SKU not ready 0x00000100
[   31.756140] sound hdaudioC1D0: autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[   31.756157] sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   31.756167] sound hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   31.756175] sound hdaudioC1D0:    mono: mono_out=0x0
[   31.756183] sound hdaudioC1D0:    dig-out=0x1e/0x0
[   31.756190] sound hdaudioC1D0:    inputs:
[   31.756200] sound hdaudioC1D0:      Rear Mic=0x18
[   31.756208] sound hdaudioC1D0:      Front Mic=0x19
[   31.756216] sound hdaudioC1D0:      Line=0x1a
[   31.756223] sound hdaudioC1D0:      CD=0x1c
[   31.781797] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input9
[   31.785630] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[   31.785710] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[   31.785788] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[   31.785859] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[   31.785932] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[   31.786002] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[   31.786075] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[   31.786148] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
[   31.944856] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin
[   31.954666] kvm: Nested Virtualization enabled
[   31.954678] kvm: Nested Paging enabled
[   31.981864] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin
[   32.078276] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin
[   32.078311] [drm] Internal thermal controller without fan control
[   32.078504] == power state 0 ==
[   32.078511] 	ui class: none
[   32.078518] 	internal class: uvd_hd 
[   32.078524] 	caps: 
[   32.078531] 	uvd    vclk: 40000 dclk: 30477
[   32.078538] 		power level 0    sclk: 27827 vddc: 850
[   32.078542] 	status: 
[   32.078547] == power state 1 ==
[   32.078551] 	ui class: none
[   32.078555] 	internal class: uvd 
[   32.078561] 	caps: 
[   32.078566] 	uvd    vclk: 53334 dclk: 40000
[   32.078572] 		power level 0    sclk: 49231 vddc: 925
[   32.078575] 	status: 
[   32.078580] == power state 2 ==
[   32.078583] 	ui class: performance
[   32.078588] 	internal class: none
[   32.078593] 	caps: 
[   32.078598] 	uvd    vclk: 0 dclk: 0
[   32.078603] 		power level 0    sclk: 27827 vddc: 850
[   32.078608] 		power level 1    sclk: 49231 vddc: 925
[   32.078612] 	status: 
[   32.078616] == power state 3 ==
[   32.078620] 	ui class: none
[   32.078624] 	internal class: boot 
[   32.078630] 	caps: 
[   32.078635] 	uvd    vclk: 0 dclk: 0
[   32.078639] 		power level 0    sclk: 20000 vddc: 925
[   32.078643] 	status: c r b 
[   32.078651] == power state 4 ==
[   32.078654] 	ui class: none
[   32.078658] 	internal class: thermal 
[   32.078664] 	caps: 
[   32.078669] 	uvd    vclk: 0 dclk: 0
[   32.078674] 		power level 0    sclk: 17778 vddc: 850
[   32.078677] 	status: 
[   32.078685] [drm] Found smc ucode version: 0x00010601
[   32.078814] [drm] radeon: dpm initialized
[   32.322963] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
[   32.323111] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   32.341028] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[   32.341302] radeon 0000:00:01.0: WB enabled
[   32.341309] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffb7ec00
[   32.341315] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffb7ec0c
[   32.343316] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf8cb2118
[   32.343322] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   32.343324] [drm] Driver supports precise vblank timestamp query.
[   32.343328] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[   32.343386] radeon 0000:00:01.0: radeon: using MSI.
[   32.343426] [drm] radeon: irq initialized.
[   32.359942] [drm] ring test on 0 succeeded in 1 usecs
[   32.359954] [drm] ring test on 3 succeeded in 3 usecs
[   32.406392] [drm] ring test on 5 succeeded in 1 usecs
[   32.426413] [drm] UVD initialized successfully.
[   32.426896] [drm] ib test on ring 0 succeeded in 0 usecs
[   32.426948] [drm] ib test on ring 3 succeeded in 0 usecs
[   32.945666] [drm] ib test on ring 5 succeeded
[   32.970163] [drm] Radeon Display Connectors
[   32.970176] [drm] Connector 0:
[   32.970182] [drm]   HDMI-A-1
[   32.970187] [drm]   HPD1
[   32.970196] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   32.970200] [drm]   Encoders:
[   32.970206] [drm]     DFP1: INTERNAL_UNIPHY
[   32.970211] [drm] Connector 1:
[   32.970215] [drm]   HDMI-A-2
[   32.970219] [drm]   HPD2
[   32.970226] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   32.970230] [drm]   Encoders:
[   32.970234] [drm]     DFP2: INTERNAL_UNIPHY
[   32.970239] [drm] Connector 2:
[   32.970243] [drm]   VGA-1
[   32.970250] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[   32.970254] [drm]   Encoders:
[   32.970259] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   32.970368] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000
[   32.970383] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000
[   32.970393] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[   32.970453] switching from power state:
[   32.970459] 	ui class: none
[   32.970465] 	internal class: boot 
[   32.970472] 	caps: 
[   32.970478] 	uvd    vclk: 0 dclk: 0
[   32.970484] 		power level 0    sclk: 20000 vddc: 925
[   32.970488] 	status: c b 
[   32.970495] switching to power state:
[   32.970499] 	ui class: performance
[   32.970504] 	internal class: none
[   32.970509] 	caps: 
[   32.970514] 	uvd    vclk: 0 dclk: 0
[   32.970520] 		power level 0    sclk: 27827 vddc: 850
[   32.970525] 		power level 1    sclk: 49231 vddc: 925
[   32.970528] 	status: r 
[   32.970642] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1]
[   32.971792] [drm:radeon_atombios_connected_scratch_regs] DFP1 disconnected
[   32.971802] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] disconnected
[   32.971810] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-2]
[   32.972923] [drm:radeon_atombios_connected_scratch_regs] DFP2 disconnected
[   32.972931] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-2] disconnected
[   32.972937] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:VGA-1]
[   33.004809] [drm:radeon_atombios_connected_scratch_regs] CRT1 connected
[   33.004858] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[   33.004882] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:VGA-1] probed modes :
[   33.004889] [drm:drm_mode_debug_printmodeline] Modeline 38:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[   33.004895] [drm:drm_mode_debug_printmodeline] Modeline 26:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   33.004901] [drm:drm_mode_debug_printmodeline] Modeline 39:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[   33.004906] [drm:drm_mode_debug_printmodeline] Modeline 30:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[   33.004912] [drm:drm_mode_debug_printmodeline] Modeline 40:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[   33.004918] [drm:drm_mode_debug_printmodeline] Modeline 41:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   33.004923] [drm:drm_mode_debug_printmodeline] Modeline 42:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[   33.004928] [drm:drm_mode_debug_printmodeline] Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[   33.004934] [drm:drm_mode_debug_printmodeline] Modeline 44:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[   33.004939] [drm:drm_mode_debug_printmodeline] Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   33.004944] [drm:drm_mode_debug_printmodeline] Modeline 32:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[   33.004949] [drm:drm_mode_debug_printmodeline] Modeline 33:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[   33.004955] [drm:drm_mode_debug_printmodeline] Modeline 34:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[   33.004960] [drm:drm_mode_debug_printmodeline] Modeline 35:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[   33.004965] [drm:drm_mode_debug_printmodeline] Modeline 36:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   33.004971] [drm:drm_mode_debug_printmodeline] Modeline 29:"720x405" 70 26483 720 736 808 896 405 406 409 422 0x0 0x6
[   33.004976] [drm:drm_mode_debug_printmodeline] Modeline 37:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   33.004982] [drm:drm_mode_debug_printmodeline] Modeline 28:"640x400" 70 23354 640 656 720 800 400 401 404 417 0x0 0x6
[   33.004987] [drm:drm_mode_debug_printmodeline] Modeline 27:"640x360" 70 20604 640 648 712 784 360 361 364 375 0x0 0x6
[   33.004990] [drm:drm_setup_crtcs] 
[   33.004995] [drm:drm_enable_connectors] connector 20 enabled? no
[   33.004998] [drm:drm_enable_connectors] connector 22 enabled? no
[   33.005001] [drm:drm_enable_connectors] connector 24 enabled? yes
[   33.005005] [drm:drm_target_preferred] looking for cmdline mode on connector 24
[   33.005009] [drm:drm_target_preferred] looking for preferred mode on connector 24 0
[   33.005012] [drm:drm_target_preferred] found mode 1280x1024
[   33.005016] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
[   33.005021] [drm:drm_setup_crtcs] desired mode 1280x1024 set on crtc 16 (0,0)
[   33.009130] [drm] fb mappable at 0xE0478000
[   33.009133] [drm] vram apper at 0xE0000000
[   33.009136] [drm] size 5242880
[   33.009138] [drm] fb depth is 24
[   33.009140] [drm]    pitch is 5120
[   33.009493] fbcon: radeondrmfb (fb0) is primary device
[   33.010148] [drm:drm_crtc_helper_set_config] 
[   33.010152] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[   33.010159] [drm:drm_crtc_helper_set_config] crtc has no fb, full mode set
[   33.010162] [drm:drm_crtc_helper_set_config] modes are different, full mode set
[   33.010168] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   33.010173] [drm:drm_mode_debug_printmodeline] Modeline 45:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[   33.010177] [drm:drm_crtc_helper_set_config] encoder changed, full mode switch
[   33.010179] [drm:drm_crtc_helper_set_config] crtc changed, full mode switch
[   33.010182] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[   33.010185] [drm:drm_crtc_helper_set_config] attempting to set mode from userspace
[   33.010190] [drm:drm_mode_debug_printmodeline] Modeline 45:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[   33.010200] [drm:radeon_encoder_set_active_device] setting active device to 00000001 from 00000001 00000001 for encoder 4
[   33.010219] [drm:drm_crtc_helper_set_mode] [CRTC:16]
[   33.010239] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000
[   33.010249] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000
[   33.010302] [drm:radeon_compute_pll_avivo] 135000 - 135000, pll dividers - fb: 21.6 ref: 2, post 8
[   33.025850] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
[   33.025897] [drm:drm_crtc_helper_set_mode] [ENCODER:23:TV-23] set [MODE:45:1280x1024]
[   33.025902] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 3, devices 00000001, active_devices 00000001
[   33.025968] [drm:dce4_crtc_load_lut] 0
[   33.039289] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 0, devices 00000001, active_devices 00000001
[   33.039506] [drm:drm_crtc_helper_set_config] Setting connector DPMS state to on
[   33.039509] [drm:drm_crtc_helper_set_config] 	[CONNECTOR:24:VGA-1] set DPMS on
[   33.039515] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000
[   33.039524] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000
[   33.039609] [drm:drm_crtc_helper_set_config] 
[   33.039611] [drm:drm_crtc_helper_set_config] [CRTC:18] [NOFB]
[   33.039614] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000
[   33.039619] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000
[   33.039689] [drm:drm_crtc_helper_set_config] 
[   33.039693] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[   33.039704] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[   33.039711] [drm:dce4_crtc_load_lut] 0
[   33.039750] [drm:dce4_crtc_load_lut] 0
[   33.054028] Console: switching to colour frame buffer device 160x64
[   33.054065] [drm:drm_crtc_helper_set_config] 
[   33.054071] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[   33.054090] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[   33.054103] [drm:dce4_crtc_load_lut] 0
[   33.054154] [drm:dce4_crtc_load_lut] 0
[   33.076119] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[   33.076128] radeon 0000:00:01.0: registered panic notifier
[   33.101668] [drm:radeon_acpi_init] Call to ATCS verify_interface failed: -5
[   33.101689] [drm:radeon_acpi_init] Call to ATIF verify_interface failed: -5
[   33.101706] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0
[   34.562363] Adding 4194300k swap on /dev/mapper/speicher-swap.  Priority:-1 extents:1 across:4194300k FS
[   37.184024] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[   37.449205] XFS (dm-8): Mounting V4 Filesystem
[   37.499601] XFS (dm-7): Mounting V4 Filesystem
[   37.778845] cfg80211: Calling CRDA to update world regulatory domain
[   38.365708] usb 2-2: reset high-speed USB device number 2 using ehci-pci
[   38.507837] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected
[   38.562752] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
[   39.077915] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   39.078623] usbcore: registered new interface driver rt2800usb
[   40.521635] EXT4-fs (md0): mounting ext3 file system using the ext4 subsystem
[   40.856120] XFS (dm-8): Ending clean mount
[   41.393779] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[   41.412675] EXT4-fs (dm-4): mounting ext3 file system using the ext4 subsystem
[   41.638397] XFS (dm-7): Ending clean mount
[   41.951569] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[   42.651294] systemd-journald[339]: Received request to flush runtime journal from PID 1
[  133.478710] EXT4-fs (dm-6): mounting ext3 file system using the ext4 subsystem
[  133.737527] EXT4-fs (dm-6): warning: maximal mount count reached, running e2fsck is recommended
[  133.984112] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[  163.905513] Process accounting resumed
[  170.077246] [drm:drm_crtc_helper_set_config] 
[  170.077253] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[  170.077275] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[  170.077288] [drm:dce4_crtc_load_lut] 0
[  170.077339] [drm:dce4_crtc_load_lut] 0
[  184.800376] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  184.930917] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
[  185.069318] r8169 0000:03:00.0 eth6: link down
[  185.069469] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  185.082686] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  185.082815] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  185.122389] rt2800usb 2-2:1.0: firmware: direct-loading firmware rt2870.bin
[  185.122414] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[  185.349057] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  191.289792] ip_tables: (C) 2000-2006 Netfilter Core Team
[  191.310665] ip6_tables: (C) 2000-2006 Netfilter Core Team
[  191.543141] Ebtables v2.0 registered
[  256.557796] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  256.773209] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  256.781966] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  256.937142] r8169 0000:03:00.0 eth6: link down
[  256.937291] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  347.063283] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  347.281200] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  347.289174] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  347.445090] r8169 0000:03:00.0 eth6: link down
[  347.445236] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  440.800902] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  440.961184] r8169 0000:03:00.0 eth6: link down
[  440.961378] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  440.974997] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  441.193125] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  497.685011] [drm:drm_crtc_helper_set_config] 
[  497.685021] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[  497.685045] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[  497.685059] [drm:dce4_crtc_load_lut] 0
[  497.685111] [drm:dce4_crtc_load_lut] 0
[  498.245007] [drm:drm_crtc_helper_set_config] 
[  498.245017] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[  498.245039] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[  498.245053] [drm:dce4_crtc_load_lut] 0
[  498.245106] [drm:dce4_crtc_load_lut] 0
[  498.612990] [drm:drm_crtc_helper_set_config] 
[  498.613000] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[  498.613023] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[  498.613037] [drm:dce4_crtc_load_lut] 0
[  498.613090] [drm:dce4_crtc_load_lut] 0
[  498.901005] [drm:drm_crtc_helper_set_config] 
[  498.901015] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[  498.901038] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[  498.901052] [drm:dce4_crtc_load_lut] 0
[  498.901105] [drm:dce4_crtc_load_lut] 0
[  501.140988] [drm:drm_crtc_helper_set_config] 
[  501.140997] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[  501.141021] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[  501.141034] [drm:dce4_crtc_load_lut] 0
[  501.141087] [drm:dce4_crtc_load_lut] 0
[  531.560083] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  531.713288] r8169 0000:03:00.0 eth6: link down
[  531.713465] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  531.729863] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  531.953228] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  622.304173] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  622.457293] r8169 0000:03:00.0 eth6: link down
[  622.457477] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  622.472182] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  622.693552] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  739.895387] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  740.048876] r8169 0000:03:00.0 eth6: link down
[  740.049053] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  740.065195] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  740.293001] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  830.313950] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  830.468872] r8169 0000:03:00.0 eth6: link down
[  830.469048] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  830.482618] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  830.697343] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready