[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.19.0-trunk-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 3.19-1~exp1 (2015-02-12)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7c54fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c7c55000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.2-644-g4f3d400 12/31/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF8000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000021f000000 aka 8688M
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] found SMP MP-table at [mem 0x000f5970-0x000f597f] mapped at [c00f5970]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01dfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
[    0.000000]  [mem 0x37600000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20000000-0x375fffff]
[    0.000000]  [mem 0x20000000-0x375fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff]
[    0.000000]  [mem 0x37800000-0x379fdfff] page 4k
[    0.000000] BRK [0x017ee000, 0x017eefff] PGTABLE
[    0.000000] BRK [0x017ef000, 0x017f0fff] PGTABLE
[    0.000000] BRK [0x017f1000, 0x017f1fff] PGTABLE
[    0.000000] BRK [0x017f2000, 0x017f2fff] PGTABLE
[    0.000000] log_buf_len: 2097152 bytes
[    0.000000] early log buf free: 127956(97%)
[    0.000000] RAMDISK: [mem 0x35c0c000-0x36dfdfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000F5B70 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0xC7C700E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0xC7C72740 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0xC7C70280 0024B8 (v02 ASROCK COREBOOT 00010001 INTL 20151124)
[    0.000000] ACPI: FACS 0xC7C70240 000040
[    0.000000] ACPI: SSDT 0xC7C72840 000046 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0xC7C72890 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0xC7C728D0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HEST 0xC7C72930 000028 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 0xC7C72960 00168E (v02 AMD    ALIB     00000001 MSFT 04000000)
[    0.000000] ACPI: SSDT 0xC7C73FF0 0003DE (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: HPET 0xC7C743D0 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 7798MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x379fdfff]
[    0.000000]   HighMem  [mem 0x379fe000-0x1effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xc7c54fff]
[    0.000000]   node   0: [mem 0x00000000-0x1effffff]
[    0.000000] Initmem setup node 0 [mem 0x00001000-0x1effffff]
[    0.000000] On node 0 totalpages: 1993715
[    0.000000] free_area_init_node: node 0, pgdat c16a9740, node_mem_map f0fb0024
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1967 pages used for memmap
[    0.000000]   Normal zone: 223742 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1765975 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 17 pages/cpu @f77c9000 s40064 r0 d29568 u69632
[    0.000000] pcpu-alloc: s40064 r0 d29568 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1991712
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.19.0-trunk-686-pae root=/dev/mapper/speicher-root ro init=/sbin/init drm_kms_helper.poll=0 drm.debug=0x06 log_buf_len=2M quiet noisapnp console=ttyS0,115200 console=tty0 pcie_aspm=force pcie_aspm.policy=powersave radeon.dpm=1
[    0.000000] PCIe ASPM is forcibly enabled
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0021f000)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 7867032K/7974860K available (4828K kernel code, 581K rwdata, 1484K rodata, 660K init, 468K bss, 107828K reserved, 0K cma-reserved, 7063900K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
                   pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
                   vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
                     .init : 0xc16bf000 - 0xc1764000   ( 660 kB)
                     .data : 0xc14b76c6 - 0xc16bd500   (2071 kB)
                     .text : 0xc1000000 - 0xc14b76c6   (4829 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:440 16
[    0.000000] CPU 0 irqstacks, hard=f702a000 soft=f702c000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1599.945 MHz processor
[    0.000055] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.89 BogoMIPS (lpj=6399780)
[    0.000062] pid_max: default: 32768 minimum: 301
[    0.000081] ACPI: Core revision 20141107
[    0.006295] ACPI: All ACPI Tables successfully acquired
[    0.006348] Security Framework initialized
[    0.006368] AppArmor: AppArmor disabled by boot time parameter
[    0.006371] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.006406] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.006411] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.006794] Initializing cgroup subsys memory
[    0.006806] Initializing cgroup subsys devices
[    0.006813] Initializing cgroup subsys freezer
[    0.006820] Initializing cgroup subsys net_cls
[    0.006827] Initializing cgroup subsys blkio
[    0.006833] Initializing cgroup subsys perf_event
[    0.006839] Initializing cgroup subsys net_prio
[    0.006880] CPU: Physical Processor ID: 0
[    0.006883] CPU: Processor Core ID: 0
[    0.006888] mce: CPU supports 6 MCE banks
[    0.006907] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
               Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.007196] Freeing SMP alternatives memory: 20K (c1764000 - c1769000)
[    0.009233] ftrace: allocating 21223 entries in 42 pages
[    0.028633] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.029106] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.068796] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
[    0.176272] Performance Events: AMD PMU driver.
[    0.176282] ... version:                0
[    0.176284] ... bit width:              48
[    0.176287] ... generic registers:      4
[    0.176290] ... value mask:             0000ffffffffffff
[    0.176293] ... max period:             00007fffffffffff
[    0.176295] ... fixed-purpose events:   0
[    0.176298] ... event mask:             000000000000000f
[    0.177342] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.177524] CPU 1 irqstacks, hard=f7128000 soft=f712a000
[    0.177528] x86: Booting SMP configuration:
[    0.177531] .... node  #0, CPUs:      #1
[    0.188535] Initializing CPU#1
[    0.190737] x86: Booted up 1 node, 2 CPUs
[    0.190742] smpboot: Total of 2 processors activated (6399.78 BogoMIPS)
[    0.191618] devtmpfs: initialized
[    0.192529] pinctrl core: initialized pinctrl subsystem
[    0.192787] NET: Registered protocol family 16
[    0.203067] cpuidle: using governor ladder
[    0.212501] cpuidle: using governor menu
[    0.212894] ACPI: bus type PCI registered
[    0.212900] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.213302] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.213306] bios32_service(0x49435024): not present
[    0.213309] PCI: Using configuration type 1 for base access
[    0.213312] PCI: Using configuration type 1 for extended access
[    0.224525] ACPI: Added _OSI(Module Device)
[    0.224533] ACPI: Added _OSI(Processor Device)
[    0.224536] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.224540] ACPI: Added _OSI(Processor Aggregator Device)
[    0.226716] ACPI: Executed 2 blocks of module-level executable AML code
[    0.231172] ACPI: Interpreter enabled
[    0.231196] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[    0.231221] ACPI: (supports S0 S1 S3 S4 S5)
[    0.231225] ACPI: Using IOAPIC for interrupt routing
[    0.231256] HEST: Table parsing has been initialized.
[    0.231263] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.238235] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.238249] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.238401] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.238972] PCI host bridge to bus 0000:00
[    0.238979] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.238985] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.238989] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.238994] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.238999] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[    0.239016] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[    0.239220] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[    0.239240] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.239252] pci 0000:00:01.0: reg 0x14: [io  0x2000-0x20ff]
[    0.239263] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff]
[    0.239334] pci 0000:00:01.0: supports D1 D2
[    0.239423] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.239515] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[    0.239532] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff]
[    0.239615] pci 0000:00:01.1: supports D1 D2
[    0.239701] pci 0000:00:01.1: System wakeup disabled by ACPI
[    0.239889] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.239917] pci 0000:00:11.0: reg 0x10: [io  0x2410-0x2417]
[    0.239932] pci 0000:00:11.0: reg 0x14: [io  0x2420-0x2423]
[    0.239947] pci 0000:00:11.0: reg 0x18: [io  0x2418-0x241f]
[    0.239961] pci 0000:00:11.0: reg 0x1c: [io  0x2424-0x2427]
[    0.239975] pci 0000:00:11.0: reg 0x20: [io  0x2400-0x240f]
[    0.239990] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff]
[    0.240204] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.240235] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff]
[    0.240393] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.240558] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.240586] pci 0000:00:12.2: reg 0x10: [mem 0xf014c000-0xf014c0ff]
[    0.240702] pci 0000:00:12.2: supports D1 D2
[    0.240706] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.240796] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.240959] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.240980] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff]
[    0.241136] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.241229] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.241256] pci 0000:00:13.2: reg 0x10: [mem 0xf014d000-0xf014d0ff]
[    0.241372] pci 0000:00:13.2: supports D1 D2
[    0.241376] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.241466] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.241631] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.241941] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.241972] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit]
[    0.242067] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.242270] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.242572] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.242705] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.242860] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.242880] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff]
[    0.243038] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.243171] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    0.243282] pci 0000:00:15.0: supports D1 D2
[    0.243377] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.243535] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[    0.243653] pci 0000:00:15.1: supports D1 D2
[    0.243748] pci 0000:00:15.1: System wakeup disabled by ACPI
[    0.243906] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[    0.244090] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[    0.244273] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[    0.244450] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[    0.244644] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[    0.244815] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[    0.244988] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[    0.245159] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[    0.245595] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[    0.245610] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.245615] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.245620] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.245624] pci 0000:00:14.4:   bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[    0.245806] pci 0000:00:15.0: PCI bridge to [bus 02]
[    0.246023] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.246053] pci 0000:03:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.246094] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.246120] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.246257] pci 0000:03:00.0: supports D1 D2
[    0.246261] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.252539] pci 0000:00:15.1: PCI bridge to [bus 03]
[    0.252558] pci 0000:00:15.1:   bridge window [io  0x1000-0x1fff]
[    0.252573] pci 0000:00:15.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.252615] pci_bus 0000:00: on NUMA node 0
[    0.253616] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.253860] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.254037] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.254136] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.254234] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.254332] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
[    0.254503] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.254602] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.254868] ACPI: Enabled 6 GPEs in block 00 to 1F
[    0.255341] vgaarb: setting as boot device: PCI:0000:00:01.0
[    0.255351] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.255363] vgaarb: loaded
[    0.255366] vgaarb: bridge control possible 0000:00:01.0
[    0.255694] PCI: Using ACPI for IRQ routing
[    0.255707] PCI: pci_cache_line_size set to 64 bytes
[    0.255867] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.255873] e820: reserve RAM buffer [mem 0xc7c55000-0xc7ffffff]
[    0.255877] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[    0.256383] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.256392] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.258554] Switched to clocksource hpet
[    0.270487] pnp: PnP ACPI init
[    0.271080] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.271345] pnp: PnP ACPI: found 1 devices
[    0.271355] PnPBIOS: Disabled by ACPI PNP
[    0.316489] pci 0000:00:14.4: PCI bridge to [bus 01]
[    0.316516] pci 0000:00:15.0: PCI bridge to [bus 02]
[    0.316533] pci 0000:00:15.1: PCI bridge to [bus 03]
[    0.316540] pci 0000:00:15.1:   bridge window [io  0x1000-0x1fff]
[    0.316553] pci 0000:00:15.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.316564] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.316569] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.316573] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.316578] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[    0.316583] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.316587] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.316591] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.316595] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff]
[    0.316600] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.316604] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.316778] NET: Registered protocol family 2
[    0.317221] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.317260] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.317311] TCP: Hash tables configured (established 8192 bind 8192)
[    0.317356] TCP: reno registered
[    0.317361] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.317375] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.317573] NET: Registered protocol family 1
[    0.317608] pci 0000:00:01.0: Video device with shadowed ROM
[    0.372973] PCI: CLS 64 bytes, default 64
[    0.373101] Unpacking initramfs...
[    1.101915] Freeing initrd memory: 18376K (f5c0c000 - f6dfe000)
[    1.102780] microcode: CPU0: patch_level=0x05000119
[    1.102800] microcode: CPU1: patch_level=0x05000119
[    1.103015] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.103033] LVT offset 0 assigned for vector 0x400
[    1.103163] perf: AMD IBS detected (0x000000ff)
[    1.104195] futex hash table entries: 512 (order: 3, 32768 bytes)
[    1.104322] audit: initializing netlink subsys (disabled)
[    1.104359] audit: type=2000 audit(1451841983.992:1): initialized
[    1.105152] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.105196] zpool: loaded
[    1.105549] VFS: Disk quotas dquot_6.5.2
[    1.105664] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.107117] alg: No test for stdrng (krng)
[    1.107215] bounce: pool size: 64 pages
[    1.107381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.107557] io scheduler noop registered
[    1.107569] io scheduler deadline registered
[    1.107676] io scheduler cfq registered (default)
[    1.108932] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[    1.108942] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[    1.108976] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[    1.108981] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.108988] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[    1.109004] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.109045] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.109155] GHES: Failed to enable APEI firmware first mode.
[    1.109167] isapnp: ISA Plug & Play support disabled
[    1.109449] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.130170] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.131846] Linux agpgart interface v0.103
[    1.132261] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.136014] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.136034] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.136866] mousedev: PS/2 mouse device common for all mice
[    1.137085] rtc_cmos 00:00: RTC can wake from S4
[    1.137539] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    1.137656] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[    1.137698] ledtrig-cpu: registered to indicate activity on CPUs
[    1.138032] TCP: cubic registered
[    1.138209] NET: Registered protocol family 10
[    1.138691] mip6: Mobile IPv6
[    1.138699] NET: Registered protocol family 17
[    1.138708] mpls_gso: MPLS GSO support
[    1.139219] Using IPI No-Shortcut mode
[    1.139988] registered taskstats version 1
[    1.140974] rtc_cmos 00:00: setting system clock to 2016-01-03 17:26:24 UTC (1451841984)
[    1.141102] PM: Hibernation image not present or could not be loaded.
[    1.141692] Freeing unused kernel memory: 660K (c16bf000 - c1764000)
[    1.141855] Write protecting the kernel text: 4832k
[    1.141993] Write protecting the kernel read-only data: 1488k
[    1.141996] NX-protecting the kernel data: 3360k
[    1.288543] systemd-udevd[66]: starting version 215
[    1.289551] random: systemd-udevd urandom read with 0 bits of entropy available
[    1.307738] SCSI subsystem initialized
[    1.312152] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    1.312271] sp5100_tco: PCI Revision ID: 0x42
[    1.312385] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[    1.312399] sp5100_tco: Last reboot was not triggered by watchdog.
[    1.313848] ACPI: bus type USB registered
[    1.313915] usbcore: registered new interface driver usbfs
[    1.313941] usbcore: registered new interface driver hub
[    1.318326] usbcore: registered new device driver usb
[    1.318711] sp5100_tco: initialized (0xf8330b00). heartbeat=60 sec (nowayout=0)
[    1.319630] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.320277] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.320645] ehci-pci: EHCI PCI platform driver
[    1.321065] QUIRK: Enable AMD PLL fix
[    1.321109] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.321124] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.321137] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.321154] ehci-pci 0000:00:12.2: debug port 1
[    1.321224] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014c000
[    1.322003] libata version 3.00 loaded.
[    1.330604] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.330741] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.330747] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.330751] usb usb1: Product: EHCI Host Controller
[    1.330755] usb usb1: Manufacturer: Linux 3.19.0-trunk-686-pae ehci_hcd
[    1.330759] usb usb1: SerialNumber: 0000:00:12.2
[    1.331056] hub 1-0:1.0: USB hub found
[    1.331074] hub 1-0:1.0: 5 ports detected
[    1.331857] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.331870] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.331879] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.331896] ehci-pci 0000:00:13.2: debug port 1
[    1.331954] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014d000
[    1.332464] thermal LNXTHERM:00: registered as thermal_zone0
[    1.332469] ACPI: Thermal Zone [TZ00] (32 C)
[    1.341321] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.342347] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xf8252000, bc:5f:f4:c8:d3:98, XID 0c200000 IRQ 26
[    1.342353] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.342668] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.342817] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.342822] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.342827] usb usb2: Product: EHCI Host Controller
[    1.342831] usb usb2: Manufacturer: Linux 3.19.0-trunk-686-pae ehci_hcd
[    1.342835] usb usb2: SerialNumber: 0000:00:13.2
[    1.343180] hub 2-0:1.0: USB hub found
[    1.343201] hub 2-0:1.0: 5 ports detected
[    1.343641] ahci 0000:00:11.0: version 3.0
[    1.344131] ohci-pci: OHCI PCI platform driver
[    1.344268] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.344276] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part 
[    1.347393] scsi host0: ahci
[    1.348113] scsi host1: ahci
[    1.348414] scsi host2: ahci
[    1.349025] scsi host3: ahci
[    1.349573] scsi host4: ahci
[    1.349859] scsi host5: ahci
[    1.350043] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19
[    1.350049] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19
[    1.350054] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19
[    1.350059] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19
[    1.350063] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19
[    1.350068] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19
[    1.350591] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.350614] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.350681] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000
[    1.411072] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.411082] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.411087] usb usb3: Product: OHCI PCI host controller
[    1.411091] usb usb3: Manufacturer: Linux 3.19.0-trunk-686-pae ohci_hcd
[    1.411095] usb usb3: SerialNumber: 0000:00:12.0
[    1.411713] hub 3-0:1.0: USB hub found
[    1.411737] hub 3-0:1.0: 5 ports detected
[    1.412391] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.412405] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[    1.412459] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000
[    1.471005] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.471015] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.471020] usb usb4: Product: OHCI PCI host controller
[    1.471024] usb usb4: Manufacturer: Linux 3.19.0-trunk-686-pae ohci_hcd
[    1.471028] usb usb4: SerialNumber: 0000:00:13.0
[    1.471657] hub 4-0:1.0: USB hub found
[    1.471682] hub 4-0:1.0: 5 ports detected
[    1.472345] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.472359] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[    1.472407] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000
[    1.530949] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.530959] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.530964] usb usb5: Product: OHCI PCI host controller
[    1.530968] usb usb5: Manufacturer: Linux 3.19.0-trunk-686-pae ohci_hcd
[    1.530972] usb usb5: SerialNumber: 0000:00:14.5
[    1.531573] hub 5-0:1.0: USB hub found
[    1.531598] hub 5-0:1.0: 2 ports detected
[    1.654898] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.670945] ata1: SATA link down (SStatus 0 SControl 300)
[    1.671012] ata5: SATA link down (SStatus 0 SControl 300)
[    1.671051] ata2: SATA link down (SStatus 0 SControl 300)
[    1.671092] ata3: SATA link down (SStatus 0 SControl 300)
[    1.671123] ata6: SATA link down (SStatus 0 SControl 300)
[    1.804945] usb 2-1: New USB device found, idVendor=148f, idProduct=2870
[    1.804957] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.804962] usb 2-1: Product: 802.11 n WLAN
[    1.804966] usb 2-1: Manufacturer: Ralink
[    1.842926] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.846898] usb 3-1: new low-speed USB device number 2 using ohci-pci
[    1.848925] ata4.00: ATA-8: WDC WD20EARS-60MVWB0, 51.0AB51, max UDMA/100
[    1.848935] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.856033] ata4.00: configured for UDMA/100
[    1.856765] scsi 3:0:0:0: Direct-Access     ATA      WDC WD20EARS-60M AB51 PQ: 0 ANSI: 5
[    1.871760] sd 3:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    1.871769] sd 3:0:0:0: [sda] 4096-byte physical blocks
[    1.871939] sd 3:0:0:0: [sda] Write Protect is off
[    1.871945] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.871989] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.883788]  sda: sda1 sda2
[    1.884949] sd 3:0:0:0: [sda] Attached SCSI disk
[    1.886136] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    2.019081] usb 3-1: New USB device found, idVendor=046d, idProduct=c312
[    2.019098] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.019107] usb 3-1: Product: USB Multimedia Keyboard
[    2.019115] usb 3-1: Manufacturer: LITEON Technology
[    2.098924] tsc: Refined TSC clocksource calibration: 1599.999 MHz
[    2.186702] md: bind<sda2>
[    2.190707] md: raid1 personality registered for level 1
[    2.191259] md/raid1:md1: active with 1 out of 2 mirrors
[    2.191308] md1: detected capacity change from 0 to 1999886286848
[    2.192424]  md1: unknown partition table
[    2.193607] md: bind<sda1>
[    2.196951] md/raid1:md0: active with 1 out of 2 mirrors
[    2.197005] md0: detected capacity change from 0 to 509804544
[    2.197960]  md0: unknown partition table
[    2.282895] usb 3-3: new full-speed USB device number 3 using ohci-pci
[    2.448059] usb 3-3: New USB device found, idVendor=1b1a, idProduct=7001
[    2.448075] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.448084] usb 3-3: Product:  USB  Mouse 
[    2.453949] hidraw: raw HID events driver (C) Jiri Kosina
[    2.469405] usbcore: registered new interface driver usbhid
[    2.469412] usbhid: USB HID core driver
[    2.471643] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:046D:C312.0001/input/input2
[    2.527275] hid-generic 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:12.0-1/input0
[    2.527675] input:  USB  Mouse  as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:1B1A:7001.0002/input/input3
[    2.527856] hid-generic 0003:1B1A:7001.0002: input,hidraw1: USB HID v1.10 Mouse [ USB  Mouse ] on usb-0000:00:12.0-3/input0
[    2.529416] input:  USB  Mouse  as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:1B1A:7001.0003/input/input4
[    2.583266] hid-generic 0003:1B1A:7001.0003: input,hidraw2: USB HID v1.10 Keyboard [ USB  Mouse ] on usb-0000:00:12.0-3/input1
[    2.690848] device-mapper: uevent: version 1.0.3
[    2.690999] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[    3.099248] Switched to clocksource tsc
[    6.726246] random: nonblocking pool is initialized
[   16.601742] NET: Registered protocol family 38
[   30.906668] raid6: mmxx1      607 MB/s
[   30.974623] raid6: mmxx2     1042 MB/s
[   31.042593] raid6: sse1x1     605 MB/s
[   31.110629] raid6: sse1x2     999 MB/s
[   31.178594] raid6: sse2x1    1027 MB/s
[   31.246593] raid6: sse2x2    1458 MB/s
[   31.246596] raid6: using algorithm sse2x2 (1458 MB/s)
[   31.246600] raid6: using ssse3x1 recovery algorithm
[   31.247348] xor: measuring software checksum speed
[   31.286537]    pIII_sse  :  3226.000 MB/sec
[   31.326536]    prefetch64-sse:  3445.000 MB/sec
[   31.326540] xor: using function: prefetch64-sse (3445.000 MB/sec)
[   31.446854] Btrfs loaded
[   32.667531] PM: Starting manual resume from disk
[   32.667544] PM: Hibernation image partition 253:2 present
[   32.667547] PM: Looking for hibernation image.
[   32.668170] PM: Image not found (code -22)
[   32.668184] PM: Hibernation image not present or could not be loaded.
[   33.469315] EXT4-fs (dm-1): mounting ext3 file system using the ext4 subsystem
[   33.503947] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[   34.647258] EXT4-fs (dm-3): mounting ext3 file system using the ext4 subsystem
[   34.712892] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[   36.757697] systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   36.758034] systemd[1]: Detected architecture x86.
[   36.770253] systemd[1]: Set hostname to <mattotaupa>.
[   39.099005] systemd[1]: rpcbind.target: Dependency Before=rpcbind.target dropped
[   39.484834] systemd[1]: Reached target User and Group Name Lookups.
[   39.485086] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   39.485473] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   39.485579] systemd[1]: Listening on LVM2 metadata daemon socket.
[   39.485614] systemd[1]: Reached target Remote File Systems (Pre).
[   39.485669] systemd[1]: Listening on LVM2 poll daemon socket.
[   39.485755] systemd[1]: Listening on Journal Socket (/dev/log).
[   39.485846] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   39.485953] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   39.487122] systemd[1]: Unmounting /usr...
[   39.487287] systemd[1]: Listening on udev Kernel Socket.
[   39.487372] systemd[1]: Reached target Remote File Systems.
[   39.487711] systemd[1]: Created slice User and Session Slice.
[   39.487946] systemd[1]: Listening on Journal Audit Socket.
[   39.488040] systemd[1]: Listening on Syslog Socket.
[   39.488215] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   39.488330] systemd[1]: Listening on udev Control Socket.
[   39.837855] systemd[1]: usr.mount: Mount process exited, code=exited status=32
[   39.837896] systemd[1]: Failed unmounting /usr.
[   39.843177] systemd[1]: Stopped File System Check on /dev/mapper/speicher-usr.
[   39.843677] systemd[1]: Listening on Journal Socket.
[   39.844161] systemd[1]: Listening on fsck to fsckd communication Socket.
[   39.844575] systemd[1]: Created slice System Slice.
[   39.845226] systemd[1]: Created slice system-getty.slice.
[   39.845772] systemd[1]: Created slice system-tor.slice.
[   39.847164] systemd[1]: Mounting POSIX Message Queue File System...
[   40.052560] systemd[1]: Starting Load Kernel Modules...
[   40.053286] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   40.054958] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   40.056790] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   40.057465] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[   40.283815] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[   40.284931] systemd[1]: Mounting Temporary Directory...
[   40.286476] systemd[1]: Starting LSB: setup for pidentd...
[   40.288624] systemd[1]: Starting Journal Service...
[   40.289084] systemd[1]: Reached target Slices.
[   40.291015] systemd[1]: Starting LSB: Set keymap...
[   40.292847] systemd[1]: Mounting Huge Pages File System...
[   40.295040] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   40.619494] systemd[1]: Mounting Debug File System...
[   40.621883] systemd[1]: Mounted Huge Pages File System.
[   40.622363] systemd[1]: Mounted POSIX Message Queue File System.
[   40.622821] systemd[1]: Mounted Temporary Directory.
[   40.623870] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   40.633191] systemd[1]: Mounted Debug File System.
[   40.683037] systemd[1]: Started LVM2 metadata daemon.
[   40.685175] systemd[1]: Starting Create Static Device Nodes in /dev...
[   40.864136] loop: module loaded
[   41.101448] nct6775: Found NCT6775F or compatible chip at 0x2e:0x290
[   41.103968] systemd[1]: Started Load Kernel Modules.
[   41.105812] systemd[1]: Starting Apply Kernel Variables...
[   41.242008] systemd[1]: Started LSB: Set keymap.
[   41.442318] systemd[1]: Started LSB: setup for pidentd.
[   41.539129] systemd[1]: Started Apply Kernel Variables.
[   41.581272] systemd[1]: Started Journal Service.
[   45.915006] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[   45.915022] EXT4-fs (dm-3): re-mounted. Opts: (null)
[   47.013235] ACPI: acpi_idle registered with cpuidle
[   47.065801] acpi-cpufreq: overriding BIOS provided _PSD data
[   47.622703] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[   47.622724] ACPI: Power Button [PWRB]
[   47.622934] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   47.622945] ACPI: Power Button [PWRF]
[   48.951917] [drm] Initialized drm 1.1.0 20060810
[   49.014638] piix4_smbus 0000:00:14.0: SMBus base address index region 0xcd6 already in use!
[   49.023257] piix4_smbus: probe of 0000:00:14.0 failed with error -16
[   49.211899] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   49.258346] EXT4-fs (md0): mounting ext3 file system using the ext4 subsystem
[   49.510313] r8169 0000:03:00.0 eth6: renamed from eth0
[   49.682204] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[   50.233483] kvm: Nested Virtualization enabled
[   50.233499] kvm: Nested Paging enabled
[   50.736864] [drm] radeon kernel modesetting enabled.
[   51.086896] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
[   51.086948] [drm] register mmio base: 0xF0100000
[   51.086953] [drm] register mmio size: 262144
[   51.087083] ATOM BIOS: AMD
[   51.087216] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[   51.087227] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[   51.087234] [drm] Detected VRAM RAM=384M, BAR=256M
[   51.087240] [drm] RAM width 32bits DDR
[   51.087416] [TTM] Zone  kernel: Available graphics memory: 411094 kiB
[   51.087422] [TTM] Zone highmem: Available graphics memory: 3943044 kiB
[   51.087427] [TTM] Initializing pool allocator
[   51.087448] [TTM] Initializing DMA pool allocator
[   51.087518] [drm] radeon: 384M of VRAM memory ready
[   51.087524] [drm] radeon: 1024M of GTT memory ready.
[   51.087554] [drm] Loading PALM Microcode
[   51.441940] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin
[   51.708777] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin
[   51.725433] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin
[   51.725466] [drm] Internal thermal controller without fan control
[   51.725656] == power state 0 ==
[   51.725663] 	ui class: none
[   51.725670] 	internal class: uvd_hd 
[   51.725677] 	caps: 
[   51.725683] 	uvd    vclk: 40000 dclk: 30477
[   51.725690] 		power level 0    sclk: 27827 vddc: 850
[   51.725694] 	status: 
[   51.725699] == power state 1 ==
[   51.725703] 	ui class: none
[   51.725707] 	internal class: uvd 
[   51.725713] 	caps: 
[   51.725718] 	uvd    vclk: 53334 dclk: 40000
[   51.725724] 		power level 0    sclk: 49231 vddc: 925
[   51.725728] 	status: 
[   51.725732] == power state 2 ==
[   51.725736] 	ui class: performance
[   51.725740] 	internal class: none
[   51.725746] 	caps: 
[   51.725751] 	uvd    vclk: 0 dclk: 0
[   51.725756] 		power level 0    sclk: 27827 vddc: 850
[   51.725761] 		power level 1    sclk: 49231 vddc: 925
[   51.725764] 	status: 
[   51.725769] == power state 3 ==
[   51.725772] 	ui class: none
[   51.725776] 	internal class: boot 
[   51.725782] 	caps: 
[   51.725787] 	uvd    vclk: 0 dclk: 0
[   51.725792] 		power level 0    sclk: 20000 vddc: 925
[   51.725795] 	status: c r b 
[   51.725804] == power state 4 ==
[   51.725807] 	ui class: none
[   51.725811] 	internal class: thermal 
[   51.725816] 	caps: 
[   51.725822] 	uvd    vclk: 0 dclk: 0
[   51.725827] 		power level 0    sclk: 17778 vddc: 850
[   51.725830] 	status: 
[   51.725838] [drm] Found smc ucode version: 0x00010601
[   51.725964] [drm] radeon: dpm initialized
[   52.198831] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
[   52.198968] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   52.225621] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[   52.225942] radeon 0000:00:01.0: WB enabled
[   52.225950] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffb3fc00
[   52.225956] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffb3fc0c
[   52.228012] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf8bb2118
[   52.228017] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   52.228020] [drm] Driver supports precise vblank timestamp query.
[   52.228024] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[   52.228078] radeon 0000:00:01.0: radeon: using MSI.
[   52.228117] [drm] radeon: irq initialized.
[   52.244625] [drm] ring test on 0 succeeded in 1 usecs
[   52.244636] [drm] ring test on 3 succeeded in 3 usecs
[   52.290430] [drm] ring test on 5 succeeded in 1 usecs
[   52.310364] [drm] UVD initialized successfully.
[   52.310724] [drm] ib test on ring 0 succeeded in 0 usecs
[   52.310766] [drm] ib test on ring 3 succeeded in 0 usecs
[   52.831022] [drm] ib test on ring 5 succeeded
[   52.851835] [drm] Radeon Display Connectors
[   52.851839] [drm] Connector 0:
[   52.851842] [drm]   HDMI-A-1
[   52.851845] [drm]   HPD1
[   52.851849] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   52.851851] [drm]   Encoders:
[   52.851854] [drm]     DFP1: INTERNAL_UNIPHY
[   52.851857] [drm] Connector 1:
[   52.851859] [drm]   HDMI-A-2
[   52.851861] [drm]   HPD2
[   52.851864] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   52.851866] [drm]   Encoders:
[   52.851868] [drm]     DFP2: INTERNAL_UNIPHY
[   52.851871] [drm] Connector 2:
[   52.851873] [drm]   VGA-1
[   52.851876] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[   52.851878] [drm]   Encoders:
[   52.851880] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   52.851942] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000
[   52.851949] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000
[   52.851955] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[   52.851997] switching from power state:
[   52.852000] 	ui class: none
[   52.852004] 	internal class: boot 
[   52.852007] 	caps: 
[   52.852010] 	uvd    vclk: 0 dclk: 0
[   52.852014] 		power level 0    sclk: 20000 vddc: 925
[   52.852016] 	status: c b 
[   52.852020] switching to power state:
[   52.852022] 	ui class: performance
[   52.852024] 	internal class: none
[   52.852027] 	caps: 
[   52.852029] 	uvd    vclk: 0 dclk: 0
[   52.852032] 		power level 0    sclk: 27827 vddc: 850
[   52.852035] 		power level 1    sclk: 49231 vddc: 925
[   52.852037] 	status: r 
[   52.852121] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1]
[   52.853228] [drm:radeon_atombios_connected_scratch_regs] DFP1 disconnected
[   52.853234] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] disconnected
[   52.853239] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-2]
[   52.854330] [drm:radeon_atombios_connected_scratch_regs] DFP2 disconnected
[   52.854335] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-2] disconnected
[   52.854339] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:VGA-1]
[   52.886168] [drm:radeon_atombios_connected_scratch_regs] CRT1 connected
[   52.886259] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[   52.886308] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:VGA-1] probed modes :
[   52.886323] [drm:drm_mode_debug_printmodeline] Modeline 38:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[   52.886335] [drm:drm_mode_debug_printmodeline] Modeline 26:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   52.886347] [drm:drm_mode_debug_printmodeline] Modeline 39:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[   52.886359] [drm:drm_mode_debug_printmodeline] Modeline 30:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[   52.886370] [drm:drm_mode_debug_printmodeline] Modeline 40:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[   52.886381] [drm:drm_mode_debug_printmodeline] Modeline 41:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   52.886392] [drm:drm_mode_debug_printmodeline] Modeline 42:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[   52.886403] [drm:drm_mode_debug_printmodeline] Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[   52.886413] [drm:drm_mode_debug_printmodeline] Modeline 44:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[   52.886424] [drm:drm_mode_debug_printmodeline] Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   52.886434] [drm:drm_mode_debug_printmodeline] Modeline 32:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[   52.886445] [drm:drm_mode_debug_printmodeline] Modeline 33:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[   52.886456] [drm:drm_mode_debug_printmodeline] Modeline 34:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[   52.886466] [drm:drm_mode_debug_printmodeline] Modeline 35:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[   52.886477] [drm:drm_mode_debug_printmodeline] Modeline 36:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   52.886488] [drm:drm_mode_debug_printmodeline] Modeline 29:"720x405" 70 26483 720 736 808 896 405 406 409 422 0x0 0x6
[   52.886498] [drm:drm_mode_debug_printmodeline] Modeline 37:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   52.886509] [drm:drm_mode_debug_printmodeline] Modeline 28:"640x400" 70 23354 640 656 720 800 400 401 404 417 0x0 0x6
[   52.886520] [drm:drm_mode_debug_printmodeline] Modeline 27:"640x360" 70 20604 640 648 712 784 360 361 364 375 0x0 0x6
[   52.886606] [drm:drm_setup_crtcs] 
[   52.886636] [drm:drm_enable_connectors] connector 20 enabled? no
[   52.886642] [drm:drm_enable_connectors] connector 22 enabled? no
[   52.886648] [drm:drm_enable_connectors] connector 24 enabled? yes
[   52.886655] [drm:drm_target_preferred] looking for cmdline mode on connector 24
[   52.886662] [drm:drm_target_preferred] looking for preferred mode on connector 24 0
[   52.886669] [drm:drm_target_preferred] found mode 1280x1024
[   52.886676] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
[   52.886687] [drm:drm_setup_crtcs] desired mode 1280x1024 set on crtc 16 (0,0)
[   52.894775] [drm] fb mappable at 0xE0478000
[   52.894779] [drm] vram apper at 0xE0000000
[   52.894782] [drm] size 5242880
[   52.894785] [drm] fb depth is 24
[   52.894788] [drm]    pitch is 5120
[   52.895199] fbcon: radeondrmfb (fb0) is primary device
[   52.895789] [drm:drm_crtc_helper_set_config] 
[   52.895793] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[   52.895799] [drm:drm_crtc_helper_set_config] crtc has no fb, full mode set
[   52.895801] [drm:drm_crtc_helper_set_config] modes are different, full mode set
[   52.895808] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   52.895814] [drm:drm_mode_debug_printmodeline] Modeline 45:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[   52.895817] [drm:drm_crtc_helper_set_config] encoder changed, full mode switch
[   52.895820] [drm:drm_crtc_helper_set_config] crtc changed, full mode switch
[   52.895822] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[   52.895825] [drm:drm_crtc_helper_set_config] attempting to set mode from userspace
[   52.895831] [drm:drm_mode_debug_printmodeline] Modeline 45:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[   52.895841] [drm:radeon_encoder_set_active_device] setting active device to 00000001 from 00000001 00000001 for encoder 4
[   52.895860] [drm:drm_crtc_helper_set_mode] [CRTC:16]
[   52.895881] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000
[   52.895890] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000
[   52.895943] [drm:radeon_compute_pll_avivo] 135000 - 135000, pll dividers - fb: 21.6 ref: 2, post 8
[   52.911192] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
[   52.911214] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
[   52.911268] [drm:drm_crtc_helper_set_mode] [ENCODER:23:TV-23] set [MODE:45:1280x1024]
[   52.911276] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 3, devices 00000001, active_devices 00000001
[   52.911356] [drm:dce4_crtc_load_lut] 0
[   52.924674] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 0, devices 00000001, active_devices 00000001
[   52.924728] [drm:drm_crtc_helper_set_config] Setting connector DPMS state to on
[   52.924733] [drm:drm_crtc_helper_set_config] 	[CONNECTOR:24:VGA-1] set DPMS on
[   52.924740] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000
[   52.924753] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000
[   52.924785] [drm:drm_crtc_helper_set_config] 
[   52.924788] [drm:drm_crtc_helper_set_config] [CRTC:18] [NOFB]
[   52.924793] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000
[   52.924800] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000
[   52.924895] [drm:drm_crtc_helper_set_config] 
[   52.924901] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[   52.924915] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[   52.924925] [drm:dce4_crtc_load_lut] 0
[   52.924974] [drm:dce4_crtc_load_lut] 0
[   52.947203] Console: switching to colour frame buffer device 160x64
[   52.947240] [drm:drm_crtc_helper_set_config] 
[   52.947246] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[   52.947266] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[   52.947279] [drm:dce4_crtc_load_lut] 0
[   52.947330] [drm:dce4_crtc_load_lut] 0
[   52.969292] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[   52.969301] radeon 0000:00:01.0: registered panic notifier
[   53.009137] [drm:radeon_acpi_init] Call to ATCS verify_interface failed: -5
[   53.009151] [drm:radeon_acpi_init] Call to ATIF verify_interface failed: -5
[   53.009161] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0
[   53.243123] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[   53.929775] sound hdaudioC1D0: ALC892: SKU not ready 0x00000100
[   53.930348] sound hdaudioC1D0: autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[   53.930361] sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   53.930367] sound hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   53.930372] sound hdaudioC1D0:    mono: mono_out=0x0
[   53.930377] sound hdaudioC1D0:    dig-out=0x1e/0x0
[   53.930382] sound hdaudioC1D0:    inputs:
[   53.930388] sound hdaudioC1D0:      Rear Mic=0x18
[   53.930393] sound hdaudioC1D0:      Front Mic=0x19
[   53.930398] sound hdaudioC1D0:      Line=0x1a
[   53.930403] sound hdaudioC1D0:      CD=0x1c
[   53.946197] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input9
[   53.947049] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[   53.947213] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[   53.947378] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[   53.947543] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[   53.947709] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[   53.947874] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[   53.948038] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[   53.948203] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
[   56.209116] Adding 4194300k swap on /dev/mapper/speicher-swap.  Priority:-1 extents:1 across:4194300k FS
[   58.213387] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[   59.564018] XFS (dm-7): Mounting V4 Filesystem
[   59.598264] XFS (dm-8): Mounting V4 Filesystem
[   62.788722] EXT4-fs (dm-4): mounting ext3 file system using the ext4 subsystem
[   62.951749] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[   65.920491] cfg80211: Calling CRDA to update world regulatory domain
[   66.043214] EXT4-fs (dm-6): mounting ext3 file system using the ext4 subsystem
[   66.076716] XFS (dm-7): Ending clean mount
[   66.145494] XFS (dm-8): Ending clean mount
[   66.291547] systemd-journald[339]: Received request to flush runtime journal from PID 1
[   69.359104] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[   69.500664] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected
[   69.552454] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[   69.555189] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
[   70.243578] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   70.244784] usbcore: registered new interface driver rt2800usb
[   73.256710] [drm:drm_crtc_helper_set_config] 
[   73.256720] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[   73.256738] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[   73.256752] [drm:dce4_crtc_load_lut] 0
[   73.256802] [drm:dce4_crtc_load_lut] 0
[   73.297800] [drm:drm_crtc_helper_set_config] 
[   73.297805] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[   73.297819] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[   73.297829] [drm:dce4_crtc_load_lut] 0
[   73.297870] [drm:dce4_crtc_load_lut] 0
[   73.312087] [drm:drm_crtc_helper_set_config] 
[   73.312094] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[   73.312113] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[   73.312124] [drm:dce4_crtc_load_lut] 0
[   73.312166] [drm:dce4_crtc_load_lut] 0
[   73.339106] [drm:drm_crtc_helper_set_config] 
[   73.339111] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[   73.339130] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[   73.339140] [drm:dce4_crtc_load_lut] 0
[   73.339181] [drm:dce4_crtc_load_lut] 0
[   73.353424] [drm:drm_crtc_helper_set_config] 
[   73.353433] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[   73.353455] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[   73.353469] [drm:dce4_crtc_load_lut] 0
[   73.353521] [drm:dce4_crtc_load_lut] 0
[   73.398237] [drm:drm_crtc_helper_set_config] 
[   73.398242] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[   73.398259] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[   73.398269] [drm:dce4_crtc_load_lut] 0
[   73.398310] [drm:dce4_crtc_load_lut] 0
[   73.412501] [drm:drm_crtc_helper_set_config] 
[   73.412511] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[   73.412529] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[   73.412543] [drm:dce4_crtc_load_lut] 0
[   73.412594] [drm:dce4_crtc_load_lut] 0
[   73.452085] [drm:drm_crtc_helper_set_config] 
[   73.452089] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[   73.452105] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[   73.452114] [drm:dce4_crtc_load_lut] 0
[   73.452151] [drm:dce4_crtc_load_lut] 0
[   73.463604] [drm:drm_crtc_helper_set_config] 
[   73.463614] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[   73.463637] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[   73.463651] [drm:dce4_crtc_load_lut] 0
[   73.463704] [drm:dce4_crtc_load_lut] 0
[   73.500458] [drm:drm_crtc_helper_set_config] 
[   73.500464] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[   73.500480] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[   73.500490] [drm:dce4_crtc_load_lut] 0
[   73.500531] [drm:dce4_crtc_load_lut] 0
[   73.514490] [drm:drm_crtc_helper_set_config] 
[   73.514494] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[   73.514500] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[   73.514514] [drm:dce4_crtc_load_lut] 0
[   73.514548] [drm:dce4_crtc_load_lut] 0
[   76.680247] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
[   76.822766] r8169 0000:03:00.0 eth6: link down
[   76.822914] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  206.433415] Process accounting resumed
[  222.080961] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[  226.986176] [drm:drm_crtc_helper_set_config] 
[  226.986183] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[  226.986205] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[  226.986219] [drm:dce4_crtc_load_lut] 0
[  226.986271] [drm:dce4_crtc_load_lut] 0
[  229.524795] systemd[1]: Started GNOME Display Manager.
[  231.764150] systemd[1]: Started LSB: exim Mail Transport Agent.
[  232.954633] systemd[1]: Started Enable support for additional executable binary formats.
[  234.550776] systemd[1]: Started LSB: start and stop timidity.
[  244.981194] systemd[1]: vdr.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
[  244.982599] systemd[1]: Failed to start Video Disk Recorder.
[  244.988744] systemd[1]: vdr.service: Unit entered failed state.
[  244.988829] systemd[1]: vdr.service: Failed with result 'exit-code'.
[  247.147879] systemd[1]: systemd-logind.service: Main process exited, code=exited, status=1/FAILURE
[  247.149211] systemd[1]: Failed to start Login Service.
[  247.154810] systemd[1]: systemd-logind.service: Unit entered failed state.
[  247.154933] systemd[1]: systemd-logind.service: Failed with result 'exit-code'.
[  247.165334] systemd[1]: systemd-logind.service: Service has no hold-off time, scheduling restart.
[  247.167196] systemd[1]: Stopped Login Service.
[  247.168789] systemd[1]: Starting Login Service...
[  248.526381] systemd[1]: NetworkManager.service: Start operation timed out. Terminating.
[  249.028341] systemd[1]: Started Accounts Service.
[  251.046139] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  251.046274] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  251.098047] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  251.098081] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[  251.319096] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  251.364497] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  252.729350] systemd[1]: Started Anonymizing overlay network for TCP.
[  253.687555] systemd[1]: Started Virtualization daemon.
[  253.796333] systemd[1]: Starting Suspend Active Libvirt Guests...
[  254.287040] systemd[1]: Started Suspend Active Libvirt Guests.
[  263.506126] ip_tables: (C) 2000-2006 Netfilter Core Team
[  263.957654] ip6_tables: (C) 2000-2006 Netfilter Core Team
[  264.573874] Ebtables v2.0 registered
[  272.192108] systemd[1]: systemd-logind.service: Main process exited, code=exited, status=1/FAILURE
[  272.193395] systemd[1]: Failed to start Login Service.
[  272.199069] systemd[1]: systemd-logind.service: Unit entered failed state.
[  272.199195] systemd[1]: systemd-logind.service: Failed with result 'exit-code'.
[  272.209416] systemd[1]: systemd-logind.service: Service has no hold-off time, scheduling restart.
[  272.211307] systemd[1]: Stopped Login Service.
[  272.212896] systemd[1]: Starting Login Service...
[  272.564225] systemd[1]: systemd-journald.service: Main process exited, code=dumped, status=6/ABRT
[  272.564874] systemd[1]: systemd-journald.service: Unit entered failed state.
[  272.565057] systemd[1]: systemd-journald.service: Failed with result 'core-dump'.
[  272.572242] systemd[1]: systemd-journald.service: Service has no hold-off time, scheduling restart.
[  272.573117] systemd[1]: Stopped Journal Service.
[  272.574882] systemd[1]: Starting Journal Service...
[  282.924090] systemd[1]: Failed to start Network Manager.
[  282.929722] systemd[1]: NetworkManager.service: Unit entered failed state.
[  282.929835] systemd[1]: NetworkManager.service: Failed with result 'timeout'.
[  283.276322] systemd[1]: NetworkManager.service: Service hold-off time over, scheduling restart.
[  283.280055] systemd[1]: Stopped Network Manager.
[  283.282593] systemd[1]: Starting Network Manager...
[  283.467937] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  283.622533] r8169 0000:03:00.0 eth6: link down
[  283.622839] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  283.629159] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  283.838828] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  286.379376] systemd[1]: Started Journal Service.
[  330.870249] [drm:drm_crtc_helper_set_config] 
[  330.870258] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[  330.870281] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[  330.870295] [drm:dce4_crtc_load_lut] 0
[  330.870384] [drm:dce4_crtc_load_lut] 0
[  331.766254] [drm:drm_crtc_helper_set_config] 
[  331.766264] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[  331.766287] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[  331.766301] [drm:dce4_crtc_load_lut] 0
[  331.766403] [drm:dce4_crtc_load_lut] 0
[  351.414250] [drm:drm_crtc_helper_set_config] 
[  351.414260] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[  351.414283] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[  351.414298] [drm:dce4_crtc_load_lut] 0
[  351.414385] [drm:dce4_crtc_load_lut] 0
[  352.022254] [drm:drm_crtc_helper_set_config] 
[  352.022264] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[  352.022286] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[  352.022300] [drm:dce4_crtc_load_lut] 0
[  352.022400] [drm:dce4_crtc_load_lut] 0
[  383.051149] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  383.210572] r8169 0000:03:00.0 eth6: link down
[  383.210753] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  383.217632] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  383.434830] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  473.473104] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  473.626501] r8169 0000:03:00.0 eth6: link down
[  473.626677] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  473.632652] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  473.850142] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  563.971050] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  564.126660] r8169 0000:03:00.0 eth6: link down
[  564.126860] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  564.132550] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  564.350845] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  654.484565] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  654.702420] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  654.712321] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  654.866213] r8169 0000:03:00.0 eth6: link down
[  654.866318] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  744.974557] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  745.130339] r8169 0000:03:00.0 eth6: link down
[  745.130514] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  745.138745] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  745.354963] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  835.462520] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  835.622283] r8169 0000:03:00.0 eth6: link down
[  835.622458] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  835.629304] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  835.847886] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  925.963533] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  926.122077] r8169 0000:03:00.0 eth6: link down
[  926.122469] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[  926.127955] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  926.346193] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  959.561984] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 1, devices 00000001, active_devices 00000001
[ 1016.731421] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1016.890153] r8169 0000:03:00.0 eth6: link down
[ 1016.890330] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1016.898307] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1017.117668] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1107.216374] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1107.374115] r8169 0000:03:00.0 eth6: link down
[ 1107.374288] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1107.381064] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1107.598855] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1197.723665] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1197.878079] r8169 0000:03:00.0 eth6: link down
[ 1197.878255] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1197.885182] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1198.103150] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1288.258095] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1288.478248] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1288.486769] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1288.641776] r8169 0000:03:00.0 eth6: link down
[ 1288.641913] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1378.725628] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1378.885743] r8169 0000:03:00.0 eth6: link down
[ 1378.885853] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1378.893751] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1379.105867] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1469.220865] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1469.373751] r8169 0000:03:00.0 eth6: link down
[ 1469.373899] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1469.379312] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1469.589670] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1559.717270] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1559.877723] r8169 0000:03:00.0 eth6: link down
[ 1559.877916] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1559.882972] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1560.094255] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1650.221269] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1650.381739] r8169 0000:03:00.0 eth6: link down
[ 1650.381935] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1650.387070] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1650.601730] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1740.724316] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1740.881871] r8169 0000:03:00.0 eth6: link down
[ 1740.882048] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1740.889565] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1741.102092] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1831.212535] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1831.369620] r8169 0000:03:00.0 eth6: link down
[ 1831.369796] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1831.376746] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1831.593255] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1921.727534] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1921.881485] r8169 0000:03:00.0 eth6: link down
[ 1921.881668] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 1921.886568] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1922.097240] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2012.473548] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 2012.629498] r8169 0000:03:00.0 eth6: link down
[ 2012.629674] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 2012.637681] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2012.849397] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2080.706425] [drm:dce4_crtc_load_lut] 0
[ 2080.706482] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 0, devices 00000001, active_devices 00000001
[ 2080.706514] [drm:drm_crtc_helper_set_config] 
[ 2080.706520] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0)
[ 2080.706541] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16]
[ 2080.706552] [drm:dce4_crtc_load_lut] 0
[ 2080.706601] [drm:dce4_crtc_load_lut] 0
[ 2080.728356] [drm:dce4_crtc_load_lut] 0
[ 2102.964610] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2103.182036] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2103.190323] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 2103.345235] r8169 0000:03:00.0 eth6: link down
[ 2103.345384] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 2193.491356] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 2193.645206] r8169 0000:03:00.0 eth6: link down
[ 2193.645385] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 2193.649765] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2193.869557] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready