
*** Pre-CBMEM romstage console overflowed, log truncated! ***
ters... done.
Disabling Watchdog reboot... done.
Setting up static northbridge registers...CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 700 size 790
 done.
Waiting for MCHBAR to come up...ok
PM1_CNT: 00001c00
SMBus controller enabled.
Setting up RAM controller.
This mainboard supports Dual Channel Operation.
DDR II Channel 0 Socket 0: x8DDS
DDR II Channel 0 Socket 1: N/A
DDR II Channel 1 Socket 0: x8DDS
DDR II Channel 1 Socket 1: N/A
Memory will be driven at 667MHz with CAS=5 clocks
tRAS = 15 cycles
tRP = 5 cycles
tRCD = 5 cycles
Refresh: 7.8us
tWR = 5 cycles
DIMM 0 side 0 = 512 MB
DIMM 0 side 1 = 512 MB
DIMM 2 side 0 = 512 MB
DIMM 2 side 1 = 512 MB
tRFC = 35 cycles
Setting Graphics Frequency...
FSB: 667 MHz Voltage: 1.05V Render: 250MHz Display: 200MHz
Setting Memory Frequency... CLKCFG = 0x00010023, CLKCFG = 0x00010043, ok
Setting mode of operation for memory channels...Dual Channel Interleaved.
Programming Clock Crossing...MEM=667 FSB=667... ok
Setting RAM size...
C0DRB = 0x20202010
C1DRB = 0x20202010
TOLUD = 0x0080
Setting row attributes...
C0DRA = 0x0033
C1DRA = 0x0033
one dimm per channel config..
Initializing System Memory IO...
Programming Dual Channel RCOMP
Table Index: 18
Programming DLL Timings...
Enabling System Memory IO...
jedec enable sequence: bank 0
jedec enable sequence: bank 1
bankaddr from bank size of rank 0
jedec enable sequence: bank 4
jedec enable sequence: bank 5
bankaddr from bank size of rank 4
receive_enable_autoconfig() for channel 0
  find_strobes_low()
    set_receive_enable() medium=0x3, coarse=0x5
    set_receive_enable() medium=0x1, coarse=0x5
  find_strobes_edge()
    set_receive_enable() medium=0x1, coarse=0x5
  add_quarter_clock() mediumcoarse=15 fine=d7
    set_receive_enable() medium=0x3, coarse=0x5
  find_preamble()
    set_receive_enable() medium=0x3, coarse=0x4
    set_receive_enable() medium=0x3, coarse=0x3
  add_quarter_clock() mediumcoarse=0f fine=57
  normalize()
    set_receive_enable() medium=0x0, coarse=0x4
receive_enable_autoconfig() for channel 1
  find_strobes_low()
    set_receive_enable() medium=0x3, coarse=0x5
    set_receive_enable() medium=0x1, coarse=0x5
  find_strobes_edge()
    set_receive_enable() medium=0x1, coarse=0x5
  add_quarter_clock() mediumcoarse=15 fine=e0
    set_receive_enable() medium=0x3, coarse=0x5
  find_preamble()
    set_receive_enable() medium=0x3, coarse=0x4
    set_receive_enable() medium=0x3, coarse=0x3
  add_quarter_clock() mediumcoarse=0f fine=60
  normalize()
    set_receive_enable() medium=0x0, coarse=0x4
RAM initialization finished.
Setting up Egress Port RCRB
Loading port arbitration table ...ok
Wait for VC1 negotiation ...ok
Setting up DMI RCRB
Wait for VC1 negotiation ...done..
Internal graphics: enabled
Waiting for DMI hardware...ok
Enabling PCI Express x16 Link
SLOTSTS: 0000
Disabling PCI Express x16 Link
Wait for link to enter detect state... ok
Setting up Root Complex Topology
CBMEM:
IMD: root @ 7f7ff000 254 entries.
IMD: root @ 7f7fec00 62 entries.
MTRR Range: Start=ffe00000 End=0 (Size 200000)
MTRR Range: Start=0 End=1000000 (Size 1000000)
MTRR Range: Start=7f400000 End=7f800000 (Size 400000)
MTRR Range: Start=7f000000 End=7f400000 (Size 400000)
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'fallback/ramstage'
CBFS: Found @ offset 33780 size 12795
Decompressing stage fallback/ramstage @ 0x7f78dfc0 (235728 bytes)
Loading module at 7f78e000 with entry 7f78e000. filesize: 0x2ea28 memsize: 0x39890
Processing 2424 relocs. Offset value of 0x7f68e000


coreboot-4.6-238-g3db7653 Tue May 30 16:32:44 UTC 2017 ramstage starting...
Normal boot.
BS: BS_PRE_DEVICE times (us): entry 0 run 0 exit 0
BS: BS_DEV_INIT_CHIPS times (us): entry 0 run 1 exit 0
Enumerating buses...
CPU_CLUSTER: 0 enabled
DOMAIN: 0000 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:00.0 [8086/27a0] enabled
PCI: 00:02.0 [8086/27a2] enabled
PCI: 00:02.1 [8086/27a6] enabled
PCI: 00:1b.0 [8086/27d8] enabled
PCI: 00:1c.0 [8086/27d0] enabled
PCI: 00:1c.1 [8086/27d2] enabled
PCI: 00:1c.2 [8086/27d4] enabled
PCI: 00:1c.3 [8086/27d6] enabled
PCI: 00:1d.0 [8086/27c8] enabled
PCI: 00:1d.1 [8086/27c9] enabled
PCI: 00:1d.2 [8086/27ca] enabled
PCI: 00:1d.3 [8086/27cb] enabled
PCI: 00:1d.7 [8086/27cc] enabled
PCI: 00:1e.0 [8086/2448] enabled
PCI: 00:1f.0 [8086/27b9] enabled
PCI: 00:1f.1 [8086/27df] enabled
Set SATA mode early
Set SATA mode early
PCI: 00:1f.2 [8086/27c5] enabled
PCI: 00:1f.3 [8086/27da] enabled
PCI: pci_scan_bus for bus 01
PCI: 01:00.0 [8086/109a] enabled
scan_bus: scanning of bus PCI: 00:1c.0 took 56 usecs
PCI: pci_scan_bus for bus 02
PCI: 02:00.0 [8086/4227] enabled
scan_bus: scanning of bus PCI: 00:1c.1 took 64 usecs
PCI: pci_scan_bus for bus 03
scan_bus: scanning of bus PCI: 00:1c.2 took 46 usecs
PCI: pci_scan_bus for bus 04
scan_bus: scanning of bus PCI: 00:1c.3 took 45 usecs
PCI: pci_scan_bus for bus 05
PCI: 05:00.0 [1180/0476] enabled
PCI: 05:00.1 [1180/0552] enabled
PCI: 05:00.2 [1180/0822] enabled
PCI: pci_scan_bus for bus 06
scan_bus: scanning of bus PCI: 05:00.0 took 54 usecs
scan_bus: scanning of bus PCI: 00:1e.0 took 139 usecs
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 700 size 790
WARNING: No CMOS option 'touchpad'.
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 700 size 790
PNP: 00ff.1 enabled
EC Firmware ID 7JHT12WW-3.4, Version 3.01A
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 700 size 790
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 700 size 790
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 700 size 790
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 700 size 790
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 700 size 790
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 700 size 790
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 700 size 790
WARNING: No CMOS option 'fn_ctrl_swap'.
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 700 size 790
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 700 size 790
PNP: 00ff.2 enabled
PNP: 164e.2 enabled
PNP: 164e.3 enabled
PNP: 164e.7 enabled
PNP: 164e.19 enabled
PNP: 002e.0 disabled
PNP: 002e.1 enabled
PNP: 002e.2 disabled
PNP: 002e.3 enabled
PNP: 002e.7 enabled
PNP: 002e.a disabled
scan_bus: scanning of bus PCI: 00:1f.0 took 9545 usecs
bus: PCI: 00:1f.3[0]->I2C: 01:69 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:54 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:55 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:56 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:57 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5c enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5d enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5e enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5f enabled
scan_bus: scanning of bus PCI: 00:1f.3 took 35 usecs
scan_bus: scanning of bus DOMAIN: 0000 took 10254 usecs
scan_bus: scanning of bus Root Device took 10260 usecs
done
BS: BS_DEV_ENUMERATE times (us): entry 0 run 10300 exit 0
found VGA at PCI: 00:02.0
Setting up VGA for PCI: 00:02.0
Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Allocating resources...
Reading resources...
Adding PCIe enhanced config space BAR 0xf0000000-0xf4000000.
PNP: 00ff.1 missing read_resources
PNP: 00ff.2 missing read_resources
Done reading resources.
skipping PNP: 00ff.2@60 fixed resource, size=0!
skipping PNP: 00ff.2@62 fixed resource, size=0!
skipping PNP: 00ff.2@64 fixed resource, size=0!
skipping PNP: 00ff.2@66 fixed resource, size=0!
skipping PNP: 164e.3@29 fixed resource, size=0!
skipping PNP: 164e.3@f0 fixed resource, size=0!
Setting resources...
pci_tolm: 0xd0000000
IGD decoded, subtracting 8M UMA
Available memory: 2088960K (2040M)
PCI: 00:02.0 10 <- [0x00e4300000 - 0x00e437ffff] size 0x00080000 gran 0x13 mem
PCI: 00:02.0 14 <- [0x00000050b0 - 0x00000050b7] size 0x00000008 gran 0x03 io
PCI: 00:02.0 18 <- [0x00d0000000 - 0x00dfffffff] size 0x10000000 gran 0x1c prefmem
PCI: 00:02.0 1c <- [0x00e4400000 - 0x00e443ffff] size 0x00040000 gran 0x12 mem
PCI: 00:02.1 10 <- [0x00e4380000 - 0x00e43fffff] size 0x00080000 gran 0x13 mem
PCI: 00:1b.0 10 <- [0x00e4440000 - 0x00e4443fff] size 0x00004000 gran 0x0e mem64
PCI: 00:1c.0 1c <- [0x0000004000 - 0x0000004fff] size 0x00001000 gran 0x0c bus 01 io
PCI: 00:1c.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 prefmem
PCI: 00:1c.0 20 <- [0x00e4100000 - 0x00e41fffff] size 0x00100000 gran 0x14 bus 01 mem
PCI: 01:00.0 10 <- [0x00e4100000 - 0x00e411ffff] size 0x00020000 gran 0x11 mem
PCI: 01:00.0 18 <- [0x0000004000 - 0x000000401f] size 0x00000020 gran 0x05 io
PCI: 00:1c.1 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 02 io
PCI: 00:1c.1 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 02 prefmem
PCI: 00:1c.1 20 <- [0x00e4200000 - 0x00e42fffff] size 0x00100000 gran 0x14 bus 02 mem
PCI: 02:00.0 10 <- [0x00e4200000 - 0x00e4200fff] size 0x00001000 gran 0x0c mem
PCI: 00:1c.2 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 03 io
PCI: 00:1c.2 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 prefmem
PCI: 00:1c.2 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 mem
PCI: 00:1c.3 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 04 io
PCI: 00:1c.3 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 04 prefmem
PCI: 00:1c.3 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 04 mem
PCI: 00:1d.0 20 <- [0x0000005000 - 0x000000501f] size 0x00000020 gran 0x05 io
PCI: 00:1d.1 20 <- [0x0000005020 - 0x000000503f] size 0x00000020 gran 0x05 io
PCI: 00:1d.2 20 <- [0x0000005040 - 0x000000505f] size 0x00000020 gran 0x05 io
PCI: 00:1d.3 20 <- [0x0000005060 - 0x000000507f] size 0x00000020 gran 0x05 io
PCI: 00:1d.7 10 <- [0x00e4444000 - 0x00e44443ff] size 0x00000400 gran 0x0a mem
PCI: 00:1e.0 1c <- [0x0000002000 - 0x0000003fff] size 0x00002000 gran 0x0c bus 05 io
PCI: 00:1e.0 24 <- [0x00e2100000 - 0x00e40fffff] size 0x02000000 gran 0x14 bus 05 prefmem
PCI: 00:1e.0 20 <- [0x00e0000000 - 0x00e20fffff] size 0x02100000 gran 0x14 bus 05 mem
PCI: 05:00.0 In set resources
PCI: 05:00.0 10 <- [0x00e2000000 - 0x00e2000fff] size 0x00001000 gran 0x0c mem
PCI: 05:00.0 2c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x02 io
PCI: 05:00.0 34 <- [0x0000003000 - 0x0000003fff] size 0x00001000 gran 0x02 io
PCI: 05:00.0 1c <- [0x00e2100000 - 0x00e40fffff] size 0x02000000 gran 0x0c prefmem
PCI: 05:00.0 24 <- [0x00e0000000 - 0x00e1ffffff] size 0x02000000 gran 0x0c mem
PCI: 05:00.1 10 <- [0x00e2001000 - 0x00e20017ff] size 0x00000800 gran 0x0b mem
PCI: 05:00.2 10 <- [0x00e2002000 - 0x00e20020ff] size 0x00000100 gran 0x08 mem
PNP: 00ff.1 missing set_resources
PNP: 00ff.2 missing set_resources
PNP: 164e.2 60 <- [0x00000002f8 - 0x00000002ff] size 0x00000008 gran 0x03 io
ERROR: PNP: 164e.2 70 irq size: 0x0000000001 not assigned
ERROR: PNP: 164e.2 74 drq size: 0x0000000001 not assigned
ERROR: PNP: 164e.2 75 drq size: 0x0000000001 not assigned
PNP: 164e.3 60 <- [0x0000000200 - 0x0000000207] size 0x00000008 gran 0x03 io
PNP: 164e.3 29 <- [0x00000000b0 - 0x00000000af] size 0x00000000 gran 0x00 irq
PNP: 164e.3 70 <- [0x0000000005 - 0x0000000005] size 0x00000001 gran 0x00 irq
PNP: 164e.3 f0 <- [0x0000000082 - 0x0000000081] size 0x00000000 gran 0x00 irq
PNP: 164e.7 60 <- [0x0000001680 - 0x000000168f] size 0x00000010 gran 0x04 io
ERROR: PNP: 164e.7 70 irq size: 0x0000000001 not assigned
PNP: 164e.19 60 <- [0x000000164c - 0x000000164d] size 0x00000002 gran 0x01 io
ERROR: PNP: 164e.19 70 irq size: 0x0000000001 not assigned
PNP: 002e.1 60 <- [0x00000003bc - 0x00000007bb] size 0x00000400 gran 0x0a io
PNP: 002e.1 70 <- [0x0000000007 - 0x0000000007] size 0x00000001 gran 0x00 irq
ERROR: PNP: 002e.1 74 drq size: 0x0000000001 not assigned
PNP: 002e.3 60 <- [0x00000003f8 - 0x00000003ff] size 0x00000008 gran 0x03 io
PNP: 002e.3 70 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 irq
PNP: 002e.7 60 <- [0x0000001620 - 0x0000001627] size 0x00000008 gran 0x03 io
ERROR: PNP: 002e.7 70 irq size: 0x0000000001 not assigned
PCI: 00:1f.1 10 <- [0x00000050b8 - 0x00000050bf] size 0x00000008 gran 0x03 io
PCI: 00:1f.1 14 <- [0x00000050d8 - 0x00000050db] size 0x00000004 gran 0x02 io
PCI: 00:1f.1 18 <- [0x00000050c0 - 0x00000050c7] size 0x00000008 gran 0x03 io
PCI: 00:1f.1 1c <- [0x00000050dc - 0x00000050df] size 0x00000004 gran 0x02 io
PCI: 00:1f.1 20 <- [0x00000050a0 - 0x00000050af] size 0x00000010 gran 0x04 io
PCI: 00:1f.2 10 <- [0x00000050c8 - 0x00000050cf] size 0x00000008 gran 0x03 io
PCI: 00:1f.2 14 <- [0x00000050e0 - 0x00000050e3] size 0x00000004 gran 0x02 io
PCI: 00:1f.2 18 <- [0x00000050d0 - 0x00000050d7] size 0x00000008 gran 0x03 io
PCI: 00:1f.2 1c <- [0x00000050e4 - 0x00000050e7] size 0x00000004 gran 0x02 io
PCI: 00:1f.2 20 <- [0x0000005080 - 0x000000509f] size 0x00000020 gran 0x05 io
PCI: 00:1f.2 24 <- [0x00e4445000 - 0x00e44453ff] size 0x00000400 gran 0x0a mem
Done setting resources.
Done allocating resources.
BS: BS_DEV_RESOURCES times (us): entry 0 run 2646 exit 0
Enabling resources...
PCI: 00:00.0 subsystem <- 17aa/2017
PCI: 00:00.0 cmd <- 06
PCI: 00:02.0 subsystem <- 17aa/201a
PCI: 00:02.0 cmd <- 03
PCI: 00:02.1 subsystem <- 17aa/201a
PCI: 00:02.1 cmd <- 02
PCI: 00:1b.0 subsystem <- 17aa/2010
PCI: 00:1b.0 cmd <- 102
PCI: 00:1c.0 bridge ctrl <- 0003
PCI: 00:1c.0 subsystem <- 8086/27d0
PCI: 00:1c.0 cmd <- 107
PCI: 00:1c.1 bridge ctrl <- 0003
PCI: 00:1c.1 subsystem <- 8086/27d2
PCI: 00:1c.1 cmd <- 106
PCI: 00:1c.2 bridge ctrl <- 0003
PCI: 00:1c.2 cmd <- 00
PCI: 00:1c.3 bridge ctrl <- 0003
PCI: 00:1c.3 cmd <- 00
PCI: 00:1d.0 subsystem <- 17aa/200a
PCI: 00:1d.0 cmd <- 01
PCI: 00:1d.1 subsystem <- 17aa/200a
PCI: 00:1d.1 cmd <- 01
PCI: 00:1d.2 subsystem <- 17aa/200a
PCI: 00:1d.2 cmd <- 01
PCI: 00:1d.3 subsystem <- 17aa/200a
PCI: 00:1d.3 cmd <- 01
PCI: 00:1d.7 subsystem <- 17aa/200b
PCI: 00:1d.7 cmd <- 102
PCI: 00:1e.0 bridge ctrl <- 0003
PCI: 00:1e.0 cmd <- 07
PCI: 00:1f.0 subsystem <- 17aa/2009
PCI: 00:1f.0 cmd <- 107
PCI: 00:1f.1 subsystem <- 17aa/200c
PCI: 00:1f.1 cmd <- 01
PCI: 00:1f.2 subsystem <- 17aa/200d
PCI: 00:1f.2 cmd <- 03
PCI: 00:1f.3 subsystem <- 17aa/200f
PCI: 00:1f.3 cmd <- 101
PCI: 01:00.0 cmd <- 03
PCI: 02:00.0 cmd <- 02
PCI: 05:00.0 bridge ctrl <- 0503
PCI: 05:00.0 cmd <- 03
PCI: 05:00.1 cmd <- 02
PCI: 05:00.2 cmd <- 06
done.
BS: BS_DEV_ENABLE times (us): entry 0 run 281 exit 0
Initializing devices...
Root Device init ...
Root Device init finished in 281 usecs
CPU_CLUSTER: 0 init ...
start_eip=0x00001000, code_size=0x00000031
Initializing SMM handler...
SMI_STS: MCSMI PM1 
PM1_STS: WAK PWRBTN 
GPE0_STS: GPIO15 GPIO14 GPIO12 GPIO11 GPIO10 GPIO7 GPIO6 GPIO5 GPIO4 GPIO3 GPIO2 GPIO1 GPIO0 
ALT_GP_SMI_STS: GPI15 GPI14 GPI12 GPI11 GPI10 GPI7 GPI6 GPI5 GPI4 GPI3 GPI2 GPI1 GPI0 
TCO_STS: 
Initializing CPU #0
CPU: vendor Intel device 6ec
CPU: family 06, model 0e, stepping 0c
Enabling cache
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'cpu_microcode_blob.bin'
CBFS: Found @ offset 1c700 size 17000
microcode: sig=0x6ec pf=0x20 revision=0x0
microcode: updated to revision 0x54 date=2006-05-01
CPU: Intel(R) Core(TM) Duo CPU      L2400  @ 1.66GHz.
MTRR: Physical address space:
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0
0x00000000000c0000 - 0x000000007f800000 size 0x7f740000 type 6
0x000000007f800000 - 0x00000000d0000000 size 0x50800000 type 0
0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1
0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0
MTRR: Fixed MSR 0x250 0x0606060606060606
MTRR: Fixed MSR 0x258 0x0606060606060606
MTRR: Fixed MSR 0x259 0x0000000000000000
MTRR: Fixed MSR 0x268 0x0606060606060606
MTRR: Fixed MSR 0x269 0x0606060606060606
MTRR: Fixed MSR 0x26a 0x0606060606060606
MTRR: Fixed MSR 0x26b 0x0606060606060606
MTRR: Fixed MSR 0x26c 0x0606060606060606
MTRR: Fixed MSR 0x26d 0x0606060606060606
MTRR: Fixed MSR 0x26e 0x0606060606060606
MTRR: Fixed MSR 0x26f 0x0606060606060606
CPU physical address size: 32 bits
MTRR: default type WB/UC MTRR counts: 5/3.
MTRR: UC selected as default type.
MTRR: 0 base 0x0000000000000000 mask 0x0000000080000000 type 6
MTRR: 1 base 0x000000007f800000 mask 0x00000000ff800000 type 0
MTRR: 2 base 0x00000000d0000000 mask 0x00000000f0000000 type 1

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

Setting up local APIC... apic_id: 0x00 done.
VMX status: enabled, locked
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 700 size 790
CPU: 0 2 siblings
CPU: 0 has sibling 1
CPU #0 initialized
Initializing CPU #1
Waiting for 1 CPUS to stop
CPU: vendor Intel device 6ec
CPU: family 06, model 0e, stepping 0c
Enabling cache
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'cpu_microcode_blob.bin'
CBFS: Found @ offset 1c700 size 17000
microcode: sig=0x6ec pf=0x20 revision=0x0
microcode: updated to revision 0x54 date=2006-05-01
CPU: Intel(R) Core(TM) Duo CPU      L2400  @ 1.66GHz.
MTRR: Fixed MSR 0x250 0x0606060606060606
MTRR: Fixed MSR 0x258 0x0606060606060606
MTRR: Fixed MSR 0x259 0x0000000000000000
MTRR: Fixed MSR 0x268 0x0606060606060606
MTRR: Fixed MSR 0x269 0x0606060606060606
MTRR: Fixed MSR 0x26a 0x0606060606060606
MTRR: Fixed MSR 0x26b 0x0606060606060606
MTRR: Fixed MSR 0x26c 0x0606060606060606
MTRR: Fixed MSR 0x26d 0x0606060606060606
MTRR: Fixed MSR 0x26e 0x0606060606060606
MTRR: Fixed MSR 0x26f 0x0606060606060606
CPU physical address size: 32 bits

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

Setting up local APIC... apic_id: 0x01 done.
VMX status: enabled, locked
CPU: 1 2 siblings
CPU #1 initialized
CPU 1 going down...
All AP CPUs stopped (1655 loops)
CPU_CLUSTER: 0 init finished in 34243 usecs
PCI: 00:02.0 init ...
No display connected on slave 2
WARNING: EDID block does NOT fully conform to EDID 1.3.
	Missing name descriptor
	Missing monitor ranges
bringing up panel at resolution 1024 x 768
Borders 0 x 0
Blank 320 x 38
Sync 136 x 6
Front porch 24 x 3
Spread spectrum clock
Single channel
Polarities 1, 1
Pixel N=3, M1=15, M2=4, P1=2
Pixel clock 65000 kHz
waiting for panel powerup
panel powered up
gtt_setup is enabled.
8M UMA
GTT PGETBL_CTL register: 0x7ffc0001
GTT Enabled
PCI: 00:02.0 init finished in 86648 usecs
PCI: 00:02.1 init ...
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 700 size 790
PCI: 00:02.1 init finished in 856 usecs
PCI: 00:1b.0 init ...
Azalia: codec type: Azalia
Azalia: base = e4440000
Azalia: codec_mask = 03
Azalia: Initializing codec #1
Azalia: codec viddid: 14f12bfa
Azalia: No verb!
Azalia: Initializing codec #0
Azalia: codec viddid: 11d41981
Azalia: verb_size: 44
Azalia: verb loaded.
PCI: 00:1b.0 init finished in 4944 usecs
PCI: 00:1c.0 init ...
Initializing ICH7 PCIe bridge.
PCI: 00:1c.0 init finished in 20 usecs
PCI: 00:1c.1 init ...
Initializing ICH7 PCIe bridge.
PCI: 00:1c.1 init finished in 20 usecs
PCI: 00:1c.2 init ...
Initializing ICH7 PCIe bridge.
PCI: 00:1c.2 init finished in 20 usecs
PCI: 00:1c.3 init ...
Initializing ICH7 PCIe bridge.
PCI: 00:1c.3 init finished in 20 usecs
PCI: 00:1d.0 init ...
UHCI: Setting up controller.. done.
PCI: 00:1d.0 init finished in 6 usecs
PCI: 00:1d.1 init ...
UHCI: Setting up controller.. done.
PCI: 00:1d.1 init finished in 6 usecs
PCI: 00:1d.2 init ...
UHCI: Setting up controller.. done.
PCI: 00:1d.2 init finished in 6 usecs
PCI: 00:1d.3 init ...
UHCI: Setting up controller.. done.
PCI: 00:1d.3 init finished in 6 usecs
PCI: 00:1d.7 init ...
EHCI: Setting up controller.. done.
PCI: 00:1d.7 init finished in 12 usecs
PCI: 00:1e.0 init ...
PCI: 00:1e.0 init finished in 13 usecs
PCI: 00:1f.0 init ...
i82801gx: lpc_init
IOAPIC: Initializing IOAPIC at 0xfec00000
IOAPIC: Bootstrap Processor Local APIC = 0x00
IOAPIC: ID = 0x02
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 700 size 790
WARNING: No CMOS option 'power_on_after_fail'.
Set power on after power failure.
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 700 size 790
NMI sources enabled.
rtc_failed = 0x0
RTC Init
Disabling ACPI via APMC:
done.
Locking SMM.
PCI: 00:1f.0 init finished in 2710 usecs
PCI: 00:1f.1 init ...
i82801gx_ide: initializing...
PCI: 00:1f.1 init finished in 11 usecs
PCI: 00:1f.2 init ...
i82801gx_sata: initializing...
SATA controller in AHCI mode.
PCI: 00:1f.2 init finished in 24 usecs
PCI: 01:00.0 init ...
PCI: 01:00.0 init finished in 1 usecs
PCI: 02:00.0 init ...
PCI: 02:00.0 init finished in 1 usecs
PCI: 05:00.0 init ...
Ricoh RL5c476: Initializing.
CF Base = 0
CF boot not enabled.
PCI: 05:00.0 init finished in 4 usecs
PCI: 05:00.1 init ...
PCI: 05:00.1 init finished in 1 usecs
PCI: 05:00.2 init ...
PCI: 05:00.2 init finished in 1 usecs
PNP: 00ff.2 init ...
PNP: 00ff.2 init finished in 1 usecs
PNP: 164e.2 init ...
PNP: 164e.2 init finished in 1 usecs
PNP: 164e.3 init ...
PNP: 164e.3 init finished in 1 usecs
PNP: 164e.7 init ...
PNP: 164e.7 init finished in 1 usecs
PNP: 164e.19 init ...
PNP: 164e.19 init finished in 1 usecs
PNP: 002e.1 init ...
PNP: 002e.1 init finished in 1 usecs
PNP: 002e.3 init ...
PNP: 002e.3 init finished in 1 usecs
PNP: 002e.7 init ...
PNP: 002e.7 init finished in 1 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:69 init ...
I2C: 01:69 init finished in 12618 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:54 init ...
I2C: 01:54 init finished in 2 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:55 init ...
I2C: 01:55 init finished in 2 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:56 init ...
I2C: 01:56 init finished in 2 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:57 init ...
I2C: 01:57 init finished in 2 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:5c init ...
Locking EEPROM RFID
init EEPROM done
I2C: 01:5c init finished in 21623 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:5d init ...
I2C: 01:5d init finished in 2 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:5e init ...
I2C: 01:5e init finished in 2 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:5f init ...
I2C: 01:5f init finished in 2 usecs
Devices initialized
BS: BS_DEV_INIT times (us): entry 0 run 164167 exit 0
Finalize devices...
Devices finalized
BS: BS_POST_DEVICE times (us): entry 0 run 3 exit 0
BS: BS_OS_RESUME_CHECK times (us): entry 0 run 0 exit 0
Copying Interrupt Routing Table to 0x000f0000... done.
Copying Interrupt Routing Table to 0x7f74a000... done.
PIRQ table: 272 bytes.
Wrote the mp table end at: 000f0410 - 000f05cc
Wrote the mp table end at: 7f749010 - 7f7491cc
MP table: 460 bytes.
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'fallback/dsdt.aml'
CBFS: Found @ offset f00 size 2e55
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'fallback/slic'
CBFS: 'fallback/slic' not found.
ACPI: Writing ACPI tables at 7f725000.
ACPI:    * FACS
ACPI:    * DSDT
ACPI:    * FADT
ACPI: added table 1/32, length now 40
ACPI:     * SSDT
Lenovo P/N is 636338U
Lenovo P/N 636338U is a tablet
Found 1 CPU(s) with 2 core(s) each.
clocks between 1000 and 1666 MHz.
adding 3 P-States between busratio 6 and a, incl. P0
PSS: 1666MHz power 31000 control 0xa1b status 0xa1b
PSS: 1333MHz power 22050 control 0x817 status 0x817
PSS: 1000MHz power 13100 control 0x613 status 0x613
clocks between 1000 and 1666 MHz.
adding 3 P-States between busratio 6 and a, incl. P0
PSS: 1666MHz power 31000 control 0xa1b status 0xa1b
PSS: 1333MHz power 22050 control 0x817 status 0x817
PSS: 1000MHz power 13100 control 0x613 status 0x613
ACPI: added table 2/32, length now 44
ACPI:    * MCFG
ACPI: added table 3/32, length now 48
ACPI:    * TCPA
TCPA log created at 7f715000
ACPI: added table 4/32, length now 52
ACPI:    * MADT
ACPI: added table 5/32, length now 56
current = 7f728810
ACPI:    * HPET
ACPI: added table 6/32, length now 60
ACPI: done.
ACPI tables: 14416 bytes.
smbios_write_tables: 7f714000
Root Device (LENOVO ThinkPad X60)
CPU_CLUSTER: 0 (Intel i945 Northbridge)
APIC: 00 (unknown)
DOMAIN: 0000 (Intel i945 Northbridge)
PCI: 00:00.0 (Intel i945 Northbridge)
PCI: 00:02.0 (Intel i945 Northbridge)
PCI: 00:02.1 (Intel i945 Northbridge)
PCI: 00:1b.0 (Intel ICH7/ICH7-M (82801Gx) Series Southbridge)
PCI: 00:1c.0 (Intel ICH7/ICH7-M (82801Gx) Series Southbridge)
PCI: 00:1c.1 (Intel ICH7/ICH7-M (82801Gx) Series Southbridge)
PCI: 00:1d.0 (Intel ICH7/ICH7-M (82801Gx) Series Southbridge)
PCI: 00:1d.1 (Intel ICH7/ICH7-M (82801Gx) Series Southbridge)
PCI: 00:1d.2 (Intel ICH7/ICH7-M (82801Gx) Series Southbridge)
PCI: 00:1d.3 (Intel ICH7/ICH7-M (82801Gx) Series Southbridge)
PCI: 00:1d.7 (Intel ICH7/ICH7-M (82801Gx) Series Southbridge)
PCI: 00:1f.0 (Intel ICH7/ICH7-M (82801Gx) Series Southbridge)
PNP: 00ff.1 (Lenovo Power Management Hardware Hub 7)
PNP: 00ff.2 (Lenovo H8 EC)
PNP: 164e.2 (NSC PC87382 Docking LPC Switch)
PNP: 164e.3 (NSC PC87382 Docking LPC Switch)
PNP: 164e.7 (NSC PC87382 Docking LPC Switch)
PNP: 164e.19 (NSC PC87382 Docking LPC Switch)
PNP: 002e.0 (NSC PC87392 Super I/O)
PNP: 002e.1 (NSC PC87392 Super I/O)
PNP: 002e.2 (NSC PC87392 Super I/O)
PNP: 002e.3 (NSC PC87392 Super I/O)
PNP: 002e.7 (NSC PC87392 Super I/O)
PNP: 002e.a (NSC PC87392 Super I/O)
PCI: 00:1f.1 (Intel ICH7/ICH7-M (82801Gx) Series Southbridge)
PCI: 00:1f.2 (Intel ICH7/ICH7-M (82801Gx) Series Southbridge)
PCI: 00:1f.3 (Intel ICH7/ICH7-M (82801Gx) Series Southbridge)
I2C: 01:69 (ICS 954309 Clock generator)
I2C: 01:54 (AT24RF08C)
I2C: 01:55 (AT24RF08C)
I2C: 01:56 (AT24RF08C)
I2C: 01:57 (AT24RF08C)
I2C: 01:5c (AT24RF08C)
I2C: 01:5d (AT24RF08C)
I2C: 01:5e (AT24RF08C)
I2C: 01:5f (AT24RF08C)
PCI: 00:1c.2 (unknown)
PCI: 00:1c.3 (unknown)
PCI: 00:1e.0 (unknown)
PCI: 01:00.0 (unknown)
PCI: 02:00.0 (unknown)
PCI: 05:00.0 (unknown)
PCI: 05:00.1 (unknown)
PCI: 05:00.2 (unknown)
APIC: 01 (unknown)
SMBIOS tables: 440 bytes.
Writing table forward entry at 0x00000500
Wrote coreboot table at: 00000500, 0x10 bytes, checksum d069
Writing coreboot table at 0x7f74b000
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 700 size 790
 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
 1. 0000000000001000-000000000009ffff: RAM
 2. 00000000000c0000-000000007f713fff: RAM
 3. 000000007f714000-000000007f7fffff: CONFIGURATION TABLES
 4. 000000007f800000-000000007fffffff: RESERVED
 5. 00000000f0000000-00000000f3ffffff: RESERVED
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
FMAP: Found "FLASH" version 1.1 at 0.
FMAP: base = ffe00000 size = 200000 #areas = 3
Wrote coreboot table at: 7f74b000, 0xaac bytes, checksum 45c9
coreboot table: 2756 bytes.
IMD ROOT    0. 7f7ff000 00001000
IMD SMALL   1. 7f7fe000 00001000
CONSOLE     2. 7f7ce000 00030000
TIME STAMP  3. 7f7cd000 00000400
ROMSTG STCK 4. 7f7c8000 00005000
RAMSTAGE    5. 7f78d000 0003b000
57a9e100    6. 7f753000 00039890
COREBOOT    7. 7f74b000 00008000
IRQ TABLE   8. 7f74a000 00001000
SMP TABLE   9. 7f749000 00001000
ACPI       10. 7f725000 00024000
TCPA LOG   11. 7f715000 00010000
SMBIOS     12. 7f714000 00000800
IMD small region:
  IMD ROOT    0. 7f7fec00 00000400
  CAR GLOBALS 1. 7f7feac0 00000140
  ROMSTAGE    2. 7f7feaa0 00000004
  57a9e000    3. 7f7fea80 00000010
  ACPI GNVS   4. 7f7fe980 00000100
BS: BS_WRITE_TABLES times (us): entry 0 run 196834 exit 0
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
CBFS: Locating 'fallback/payload'
CBFS: Found @ offset 802c0 size 588fe
Loading segment from ROM address 0xffe803f8
  code (compression=1)
  New segment dstaddr 0x8200 memsize 0x179fc srcaddr 0xffe8044c filesize 0x8549
Loading segment from ROM address 0xffe80414
  code (compression=1)
  New segment dstaddr 0x100000 memsize 0x102650 srcaddr 0xffe88995 filesize 0x50361
Loading segment from ROM address 0xffe80430
  Entry Point 0x00008200
Loading Segment: addr: 0x0000000000008200 memsz: 0x00000000000179fc filesz: 0x0000000000008549
Post relocation: addr: 0x0000000000008200 memsz: 0x00000000000179fc filesz: 0x0000000000008549
using LZMA
Clearing Segment: addr: 0x00000000000182bb memsz: 0x0000000000007941
dest 00008200, end 0001fbfc, bouncebuffer ffffffff
Loading Segment: addr: 0x0000000000100000 memsz: 0x0000000000102650 filesz: 0x0000000000050361
Post relocation: addr: 0x0000000000100000 memsz: 0x0000000000102650 filesz: 0x0000000000050361
using LZMA
dest 00100000, end 00202650, bouncebuffer ffffffff
BS: BS_PAYLOAD_LOAD times (us): entry 0 run 223698 exit 0
ICH7 watchdog disabled
Jumping to boot code at 00008200(7f74b000)
error: serial port `com0' isn't found.
error: file `/boot/grub/fonts/unicode.pf2' not found.
error: terminal `console' isn't found.
error: terminal `serial' isn't found.
GNU GRUB  version 2.02~rc2

+----------------------------------------------------------------------------+||||||||||||||||||||||+----------------------------------------------------------------------------+     Use the ^ and v keys to select which entry is highlighted.          
      Press enter to boot the selected OS, `e' to edit the commands       
      before booting or `c' for a command-line. ESC to return             
      previous menu.                                                       *Debian GNU/Linux, with Linux 4.12.0-rc3+                                   ? Debian GNU/Linux, with Linux 4.12.0-rc3+ (recovery mode)                   ? Debian GNU/Linux, with Linux 4.12.0-rc2+                                   ? Debian GNU/Linux, with Linux 4.12.0-rc2+ (recovery mode)                   ? Debian GNU/Linux, with Linux 4.12.0-rc1+                                   ? Debian GNU/Linux, with Linux 4.12.0-rc1+ (recovery mode)                   ? Debian GNU/Linux, with Linux 4.11.0+                                       ? Debian GNU/Linux, with Linux 4.11.0+ (recovery mode)                       ? Debian GNU/Linux, with Linux 4.11.0-rc8+                                   ? Debian GNU/Linux, with Linux 4.11.0-rc8+ (recovery mode)                   ? Debian GNU/Linux, with Linux 4.11.0-rc8                                    ?v   The highlighted entry will be executed automatically in 1s.                    The highlighted entry will be executed automatically in 0s.                   Booting `Debian GNU/Linux, with Linux 4.12.0-rc3+'

Loading Linux 4.12.0-rc3+ ...
Loading initial ramdisk ...