[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-1 (2015-04-08)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=f1361d3c-dc7b-42dd-8906-4cff95e9111d ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bfeb9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfeba000-0x00000000bfffffff] type 16
[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c89fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004355fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 2325TLU/2325TLU, BIOS CBET4000 4.0-9133-g8d978a8 04/13/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x435600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0C0000000 mask FF0000000 uncachable
[    0.000000]   1 base 0D0000000 mask FF0000000 write-combining
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbfeba max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x435400000-0x4355fffff]
[    0.000000]  [mem 0x435400000-0x4355fffff] page 2M
[    0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x434000000-0x4353fffff]
[    0.000000]  [mem 0x434000000-0x4353fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x400000000-0x433ffffff]
[    0.000000]  [mem 0x400000000-0x433ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xbfeb9fff]
[    0.000000]  [mem 0x40200000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbfeb9fff] page 4k
[    0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
[    0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[    0.000000]  [mem 0x100000000-0x3ffffffff] page 2M
[    0.000000] RAMDISK: [mem 0x361ce000-0x370defff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000BFEC60E0 00004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000BFEC9920 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000BFEC6250 0036D0 (v02 COREv4 COREBOOT 20110725 INTL 20150408)
[    0.000000] ACPI: FACS 0x00000000BFEC6210 000040
[    0.000000] ACPI: SSDT 0x00000000BFEC9A20 0012D2 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x00000000BFECAD00 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000BFECAD40 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000BFECADB0 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000004355fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x4355fffff]
[    0.000000]   NODE_DATA [mem 0x4355ee000-0x4355f2fff]
[    0.000000]  [ffffea0000000000-ffffea000edfffff] PMD -> [ffff880424e00000-ffff880432dfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x4355fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009ffff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xbfeb9fff]
[    0.000000]   node   0: [mem 0x100000000-0x4355fffff]
[    0.000000] On node 0 totalpages: 4149337
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10678 pages used for memmap
[    0.000000]   DMA32 zone: 780986 pages, LIFO batch:31
[    0.000000]   Normal zone: 45997 pages used for memmap
[    0.000000]   Normal zone: 3364352 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xc0a00000-0xc89fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfeba000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc89fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc8a00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[    0.000000] e820: [mem 0xc8a00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff880435200000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4092584
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=f1361d3c-dc7b-42dd-8906-4cff95e9111d ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16274404K/16597348K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 322944K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2793.525 MHz processor
[    0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.05 BogoMIPS (lpj=11174100)
[    0.000031] pid_max: default: 32768 minimum: 301
[    0.000037] ACPI: Core revision 20140424
[    0.002494] ACPI: All ACPI Tables successfully acquired
[    0.002612] Security Framework initialized
[    0.002619] AppArmor: AppArmor disabled by boot time parameter
[    0.002620] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.003420] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.006965] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.008548] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.008563] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.008780] Initializing cgroup subsys memory
[    0.008784] Initializing cgroup subsys devices
[    0.008790] Initializing cgroup subsys freezer
[    0.008792] Initializing cgroup subsys net_cls
[    0.008795] Initializing cgroup subsys blkio
[    0.008798] Initializing cgroup subsys perf_event
[    0.008800] Initializing cgroup subsys net_prio
[    0.008820] CPU: Physical Processor ID: 0
[    0.008821] CPU: Processor Core ID: 0
[    0.008826] mce: CPU supports 7 MCE banks
[    0.008836] CPU0: Thermal monitoring enabled (TM1)
[    0.008844] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[    0.008943] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[    0.009889] ftrace: allocating 21614 entries in 85 pages
[    0.018667] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.058399] smpboot: CPU0: Intel(R) Core(TM) i5-3360M CPU @ 2.80GHz (fam: 06, model: 3a, stepping: 09)
[    0.058406] TSC deadline timer enabled
[    0.058424] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.058442] ... version:                3
[    0.058442] ... bit width:              48
[    0.058443] ... generic registers:      4
[    0.058444] ... value mask:             0000ffffffffffff
[    0.058444] ... max period:             0000ffffffffffff
[    0.058445] ... fixed-purpose events:   3
[    0.058446] ... event mask:             000000070000000f
[    0.059644] x86: Booting SMP configuration:
[    0.059646] .... node  #0, CPUs:      #1
[    0.072743] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.072839]  #2 #3
[    0.099243] x86: Booted up 1 node, 4 CPUs
[    0.099246] smpboot: Total of 4 processors activated (22348.20 BogoMIPS)
[    0.102011] devtmpfs: initialized
[    0.105997] pinctrl core: initialized pinctrl subsystem
[    0.106063] NET: Registered protocol family 16
[    0.106161] cpuidle: using governor ladder
[    0.106163] cpuidle: using governor menu
[    0.106197] ACPI: bus type PCI registered
[    0.106199] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.106275] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.106277] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.106350] PCI: Using configuration type 1 for base access
[    0.115766] ACPI: Added _OSI(Module Device)
[    0.115768] ACPI: Added _OSI(Processor Device)
[    0.115768] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.115769] ACPI: Added _OSI(Processor Aggregator Device)
[    0.118006] ACPI: Interpreter enabled
[    0.118010] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.118014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.118024] ACPI: (supports S0 S3 S4 S5)
[    0.118025] ACPI: Using IOAPIC for interrupt routing
[    0.118048] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.130616] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.130620] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.130659] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.130734] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.130849] PCI host bridge to bus 0000:00
[    0.130851] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.130852] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.130854] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.130855] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.130856] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.130857] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.130859] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.130860] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[    0.130861] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.130862] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.130863] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.130865] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.130866] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.130867] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.130868] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.130870] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.130871] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[    0.130872] pci_bus 0000:00: root bus resource [mem 0xc8a00000-0xfebfffff]
[    0.130873] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.130880] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.130951] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.130960] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
[    0.130966] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.130970] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.131053] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.131074] pci 0000:00:14.0: reg 0x10: [mem 0xe1620000-0xe162ffff 64bit]
[    0.131142] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.131172] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.131211] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.131232] pci 0000:00:16.0: reg 0x10: [mem 0xe1636100-0xe163610f 64bit]
[    0.131309] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.131378] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.131395] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff]
[    0.131403] pci 0000:00:19.0: reg 0x14: [mem 0xe1634000-0xe1634fff]
[    0.131412] pci 0000:00:19.0: reg 0x18: [io  0x3040-0x305f]
[    0.131472] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.131535] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.131554] pci 0000:00:1a.0: reg 0x10: [mem 0xe1635800-0xe1635bff]
[    0.131641] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.131670] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.131708] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.131724] pci 0000:00:1b.0: reg 0x10: [mem 0xe1630000-0xe1633fff 64bit]
[    0.131794] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.131823] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.131863] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.132000] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.132077] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.132211] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.132289] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.132423] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.132505] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.132524] pci 0000:00:1d.0: reg 0x10: [mem 0xe1635c00-0xe1635fff]
[    0.132610] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.132640] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.132678] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[    0.132833] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.132852] pci 0000:00:1f.2: reg 0x10: [io  0x3080-0x3087]
[    0.132860] pci 0000:00:1f.2: reg 0x14: [io  0x3090-0x3093]
[    0.132868] pci 0000:00:1f.2: reg 0x18: [io  0x3088-0x308f]
[    0.132876] pci 0000:00:1f.2: reg 0x1c: [io  0x3094-0x3097]
[    0.132884] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.132892] pci 0000:00:1f.2: reg 0x24: [mem 0xe1635000-0xe16357ff]
[    0.132939] pci 0000:00:1f.2: PME# supported from D3hot
[    0.132998] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.133012] pci 0000:00:1f.3: reg 0x10: [mem 0xe1636000-0xe16360ff 64bit]
[    0.133032] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.133216] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[    0.133248] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[    0.133283] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe14000ff]
[    0.133583] pci 0000:01:00.0: supports D1 D2
[    0.133584] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.139339] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.139351] pci 0000:00:1c.0:   bridge window [mem 0xe1400000-0xe14fffff]
[    0.139654] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000
[    0.139838] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe1501fff 64bit]
[    0.140603] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.147457] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.147469] pci 0000:00:1c.1:   bridge window [mem 0xe1500000-0xe15fffff]
[    0.147592] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.147597] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.147601] pci 0000:00:1c.2:   bridge window [mem 0xe0800000-0xe0ffffff]
[    0.147610] pci 0000:00:1c.2:   bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[    0.147733] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.147771] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.147806] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.147841] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.147876] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.147911] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.147945] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.147980] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.148402] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.148442] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.148526] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.148528] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.148530] vgaarb: loaded
[    0.148531] vgaarb: bridge control possible 0000:00:02.0
[    0.148580] PCI: Using ACPI for IRQ routing
[    0.150054] PCI: pci_cache_line_size set to 64 bytes
[    0.150160] e820: reserve RAM buffer [mem 0xbfeba000-0xbfffffff]
[    0.150161] e820: reserve RAM buffer [mem 0x435600000-0x437ffffff]
[    0.150278] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.150281] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.152305] Switched to clocksource hpet
[    0.156632] pnp: PnP ACPI init
[    0.156642] ACPI: bus type PNP registered
[    0.156706] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.156708] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.156710] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.156711] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.156713] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.156714] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.156716] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.156717] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.156719] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[    0.156720] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[    0.156722] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.157111] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.157114] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.157151] system 00:02: [io  0x0500-0x057f] could not be reserved
[    0.157153] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.157155] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.157176] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.157209] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.157235] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.157246] pnp: PnP ACPI: found 6 devices
[    0.157247] ACPI: bus type PNP unregistered
[    0.163570] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.163578] pci 0000:00:1c.0:   bridge window [mem 0xe1400000-0xe14fffff]
[    0.163590] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.163595] pci 0000:00:1c.1:   bridge window [mem 0xe1500000-0xe15fffff]
[    0.163607] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.163610] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.163617] pci 0000:00:1c.2:   bridge window [mem 0xe0800000-0xe0ffffff]
[    0.163622] pci 0000:00:1c.2:   bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[    0.163631] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.163632] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.163634] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.163635] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.163636] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.163637] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.163639] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.163640] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.163641] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.163642] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.163644] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.163645] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.163646] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.163647] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.163648] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[    0.163650] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[    0.163651] pci_bus 0000:00: resource 20 [mem 0xc8a00000-0xfebfffff]
[    0.163652] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
[    0.163654] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff]
[    0.163655] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff]
[    0.163657] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.163658] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff]
[    0.163659] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref]
[    0.163714] NET: Registered protocol family 2
[    0.163943] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.164140] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.164240] TCP: Hash tables configured (established 131072 bind 65536)
[    0.164256] TCP: reno registered
[    0.164272] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.164330] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.164423] NET: Registered protocol family 1
[    0.164437] pci 0000:00:02.0: Video device with shadowed ROM
[    0.164871] PCI: CLS 64 bytes, default 64
[    0.164913] Unpacking initramfs...
[    0.392160] Freeing initrd memory: 15428K (ffff8800361ce000 - ffff8800370df000)
[    0.392170] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.392172] software IO TLB [mem 0xbbeba000-0xbfeba000] (64MB) mapped at [ffff8800bbeba000-ffff8800bfeb9fff]
[    0.392392] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.392434] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x0
[    0.392440] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x0
[    0.392446] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x0
[    0.392452] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x0
[    0.392493] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.392546] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x408000 bytes, mapped to 0xffffc90005b80000
[    0.392548] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1376x768x32, linelength=5504
[    0.394661] Console: switching to colour frame buffer device 172x48
[    0.396697] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    0.396909] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.396937] audit: initializing netlink subsys (disabled)
[    0.396951] audit: type=2000 audit(1428948870.400:1): initialized
[    0.397262] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.397278] zbud: loaded
[    0.397443] VFS: Disk quotas dquot_6.5.2
[    0.397458] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.397501] msgmni has been set to 31816
[    0.397779] alg: No test for stdrng (krng)
[    0.397804] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.397852] io scheduler noop registered
[    0.397855] io scheduler deadline registered
[    0.397888] io scheduler cfq registered (default)
[    0.398048] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.398215] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.398382] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.398510] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.398512] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.398517] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.398538] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.398539] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.398544] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.398564] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.398569] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.398581] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.398620] pciehp 0000:00:1c.2:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[    0.398651] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[    0.398655] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.398671] intel_idle: MWAIT substates: 0x21120
[    0.398672] intel_idle: v0.4 model 0x3A
[    0.398672] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.398839] GHES: HEST is not enabled!
[    0.398909] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.399248] Linux agpgart interface v0.103
[    0.399337] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.401354] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.401357] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.401459] mousedev: PS/2 mouse device common for all mice
[    0.401497] rtc_cmos 00:03: RTC can wake from S4
[    0.401632] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.401666] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.401674] Intel P-state driver initializing.
[    0.401683] Intel pstate controlling: cpu 0
[    0.401702] Intel pstate controlling: cpu 1
[    0.401719] Intel pstate controlling: cpu 2
[    0.401735] Intel pstate controlling: cpu 3
[    0.401758] ledtrig-cpu: registered to indicate activity on CPUs
[    0.401840] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.401841] AMD IOMMUv2 functionality not available on this system
[    0.402019] TCP: cubic registered
[    0.402144] NET: Registered protocol family 10
[    0.402517] mip6: Mobile IPv6
[    0.402524] NET: Registered protocol family 17
[    0.402534] mpls_gso: MPLS GSO support
[    0.402826] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.403407] registered taskstats version 1
[    0.404145] rtc_cmos 00:03: setting system clock to 2015-04-13 18:14:31 UTC (1428948871)
[    0.404244] PM: Hibernation image not present or could not be loaded.
[    0.405486] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[    0.405489] Write protecting the kernel read-only data: 8192k
[    0.409114] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[    0.410191] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    0.459168] systemd-udevd[74]: starting version 215
[    0.459414] random: systemd-udevd urandom read with 2 bits of entropy available
[    0.472095] ACPI: bus type USB registered
[    0.472147] usbcore: registered new interface driver usbfs
[    0.472166] usbcore: registered new interface driver hub
[    0.472199] pps_core: LinuxPPS API ver. 1 registered
[    0.472201] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.472210] usbcore: registered new device driver usb
[    0.472450] PTP clock support registered
[    0.472877] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.473150] ehci-pci: EHCI PCI platform driver
[    0.473201] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.473209] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.473304] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.473328] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[    0.473412] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.473414] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.473416] usb usb1: Product: xHCI Host Controller
[    0.473418] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.473419] usb usb1: SerialNumber: 0000:00:14.0
[    0.473586] hub 1-0:1.0: USB hub found
[    0.473601] hub 1-0:1.0: 4 ports detected
[    0.473603] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    0.473604] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[    0.473802] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.473806] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.473897] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.473900] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.473902] usb usb2: Product: xHCI Host Controller
[    0.473904] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.473907] usb usb2: SerialNumber: 0000:00:14.0
[    0.473939] thermal LNXTHERM:00: registered as thermal_zone0
[    0.473942] ACPI: Thermal Zone [THM0] (75 C)
[    0.473994] sdhci: Secure Digital Host Controller Interface driver
[    0.473995] sdhci: Copyright(c) Pierre Ossman
[    0.474047] hub 2-0:1.0: USB hub found
[    0.474067] hub 2-0:1.0: 4 ports detected
[    0.474302] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[    0.474365] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.474371] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.474388] ehci-pci 0000:00:1a.0: debug port 2
[    0.474629] mmc0: no vqmmc regulator found
[    0.474631] mmc0: no vmmc regulator found
[    0.475127] thermal LNXTHERM:01: registered as thermal_zone1
[    0.475129] ACPI: Thermal Zone [THM1] (27 C)
[    0.476813] SCSI subsystem initialized
[    0.478291] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.478348] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe1635800
[    0.478456] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[    0.478639] libata version 3.00 loaded.
[    0.488744] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.488818] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.488822] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.488824] usb usb3: Product: EHCI Host Controller
[    0.488826] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.488828] usb usb3: SerialNumber: 0000:00:1a.0
[    0.489007] hub 3-0:1.0: USB hub found
[    0.489017] hub 3-0:1.0: 3 ports detected
[    0.489320] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.489326] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    0.489341] ehci-pci 0000:00:1d.0: debug port 2
[    0.493260] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.493278] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe1635c00
[    0.504760] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.504795] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    0.504797] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.504799] usb usb4: Product: EHCI Host Controller
[    0.504800] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.504802] usb usb4: SerialNumber: 0000:00:1d.0
[    0.504945] hub 4-0:1.0: USB hub found
[    0.504951] hub 4-0:1.0: 3 ports detected
[    0.505135] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.505161] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[    0.701822] e1000e 0000:00:19.0 eth0: registered PHC clock
[    0.701825] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:6a:16:ab
[    0.701828] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    0.701880] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    0.701933] ahci 0000:00:1f.2: version 3.0
[    0.702074] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    0.702103] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.717075] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[    0.717082] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    0.717747] scsi0 : ahci
[    0.717880] scsi1 : ahci
[    0.717980] scsi2 : ahci
[    0.718080] scsi3 : ahci
[    0.718177] scsi4 : ahci
[    0.718276] scsi5 : ahci
[    0.718319] ata1: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635100 irq 45
[    0.718321] ata2: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635180 irq 45
[    0.718323] ata3: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635200 irq 45
[    0.718324] ata4: DUMMY
[    0.718325] ata5: DUMMY
[    0.718326] ata6: DUMMY
[    0.785166] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[    0.980803] usb 1-4: New USB device found, idVendor=05c6, idProduct=9205
[    0.980808] usb 1-4: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[    0.980811] usb 1-4: Product: Qualcomm Gobi 2000
[    0.980814] usb 1-4: Manufacturer: Qualcomm Incorporated
[    1.037462] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.037762] ata1.00: supports DRM functions and may not be fully accessible
[    1.037958] ata1.00: disabling queued TRIM support
[    1.037963] ata1.00: ATA-9: Crucial_CT960M500SSD1, MU02, max UDMA/133
[    1.037967] ata1.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.038831] ata1.00: supports DRM functions and may not be fully accessible
[    1.039027] ata1.00: disabling queued TRIM support
[    1.039576] ata1.00: configured for UDMA/133
[    1.039874] scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT960M50 MU02 PQ: 0 ANSI: 5
[    1.097576] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.230118] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[    1.230123] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.230573] hub 3-1:1.0: USB hub found
[    1.230742] hub 3-1:1.0: 6 ports detected
[    1.341816] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.357853] ata2: SATA link down (SStatus 0 SControl 300)
[    1.389886] tsc: Refined TSC clocksource calibration: 2793.653 MHz
[    1.474418] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[    1.474424] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.474886] hub 4-1:1.0: USB hub found
[    1.475036] hub 4-1:1.0: 8 ports detected
[    1.546258] usb 3-1.3: new full-speed USB device number 3 using ehci-pci
[    1.639381] usb 3-1.3: New USB device found, idVendor=147e, idProduct=2020
[    1.639386] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.639389] usb 3-1.3: Product: Biometric Coprocessor
[    1.639391] usb 3-1.3: Manufacturer: Auth
[    1.686261] ata3: SATA link down (SStatus 0 SControl 300)
[    1.690633] sd 0:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
[    1.690639] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.690847] sd 0:0:0:0: [sda] Write Protect is off
[    1.690852] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.690904] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.693099]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda8
[    1.693935] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.694673] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.710624] usb 3-1.4: new full-speed USB device number 4 using ehci-pci
[    1.806160] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[    1.806165] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.806169] usb 3-1.4: Product: BCM20702A0
[    1.806171] usb 3-1.4: Manufacturer: Broadcom Corp
[    1.806174] usb 3-1.4: SerialNumber: 2016D8D6A3C7
[    1.806379] raid6: sse2x1    4680 MB/s
[    1.874455] raid6: sse2x2    7703 MB/s
[    1.878520] usb 3-1.6: new high-speed USB device number 5 using ehci-pci
[    1.942527] raid6: sse2x4   10970 MB/s
[    1.942528] raid6: using algorithm sse2x4 (10970 MB/s)
[    1.942530] raid6: using ssse3x2 recovery algorithm
[    1.942767] xor: automatically using best checksumming function:
[    1.978390] usb 3-1.6: New USB device found, idVendor=5986, idProduct=02d2
[    1.978392] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.978394] usb 3-1.6: Product: Integrated Camera
[    1.978395] usb 3-1.6: Manufacturer: Ricoh Company Ltd.
[    1.982578]    avx       : 21137.000 MB/sec
[    1.985493] Btrfs loaded
[    2.032760] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    2.043853] XFS (sda6): Mounting V4 Filesystem
[    2.071188] XFS (sda6): Ending clean mount
[    2.121059] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    2.222004] lp: driver loaded but no devices found
[    2.225888] ppdev: user-space parallel port driver
[    2.229180] fuse init (API version 7.23)
[    2.230236] systemd-udevd[205]: starting version 215
[    2.295830] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/PNP0C09:00/PNP0C0E:00/input/input2
[    2.295836] ACPI: Sleep Button [SLPB]
[    2.295899] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/PNP0C09:00/PNP0C0D:00/input/input3
[    2.295999] ACPI: Lid Switch [LID]
[    2.296072] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    2.296076] ACPI: Power Button [PWRF]
[    2.298026] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[    2.303776] [drm] Initialized drm 1.1.0 20060810
[    2.304421] ACPI: AC Adapter [AC] (on-line)
[    2.311544] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.315805] [drm] Memory usable by graphics device = 2048M
[    2.315809] checking generic (d0000000 408000) vs hw (d0000000 10000000)
[    2.315811] fb: switching to inteldrmfb from simple
[    2.315843] Console: switching to colour dummy device 80x25
[    2.315899] [drm] Replacing VGA console driver
[    2.316945] Non-volatile memory driver v1.3
[    2.318696] ACPI: Battery Slot [BAT0] (battery present)
[    2.319459] ACPI: Battery Slot [BAT1] (battery absent)
[    2.322364] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    2.322368] thinkpad_acpi: http://ibm-acpi.sf.net/
[    2.322369] thinkpad_acpi: ThinkPad BIOS CBET4000 4.0-9133-g8d978a8, EC G2HT31WW-3.22
[    2.322370] thinkpad_acpi: Lenovo ThinkPad X230, model 2325TLU
[    2.322908] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[    2.323008] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    2.323009] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    2.323773] cfg80211: Calling CRDA to update world regulatory domain
[    2.325284] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    2.325369] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    2.328042] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[    2.341112] usbcore: registered new interface driver usbserial
[    2.341128] usbcore: registered new interface driver usbserial_generic
[    2.341140] usbserial: USB Serial support registered for generic
[    2.342476] media: Linux media interface: v0.10
[    2.342600] usbcore: registered new interface driver qcserial
[    2.342614] usbserial: USB Serial support registered for Qualcomm USB modem
[    2.343519] qcserial 1-4:1.1: Qualcomm USB modem converter detected
[    2.343629] usb 1-4: Qualcomm USB modem converter now attached to ttyUSB0
[    2.344703] qcserial 1-4:1.2: Qualcomm USB modem converter detected
[    2.344794] usb 1-4: Qualcomm USB modem converter now attached to ttyUSB1
[    2.344937] Linux video capture interface: v2.00
[    2.346797] qcserial 1-4:1.3: Qualcomm USB modem converter detected
[    2.346894] usb 1-4: Qualcomm USB modem converter now attached to ttyUSB2
[    2.349094] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    2.350433] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    2.350436] Copyright(c) 2003- 2014 Intel Corporation
[    2.350923] iwlwifi 0000:02:00.0: irq 47 for MSI/MSI-X
[    2.351675] Bluetooth: Core ver 2.19
[    2.351689] NET: Registered protocol family 31
[    2.351691] Bluetooth: HCI device and connection manager initialized
[    2.351697] Bluetooth: HCI socket layer initialized
[    2.351699] Bluetooth: L2CAP socket layer initialized
[    2.351709] Bluetooth: SCO socket layer initialized
[    2.355847] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d2)
[    2.356236] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[    2.356422] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    2.357698] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input8
[    2.357784] usbcore: registered new interface driver uvcvideo
[    2.357786] USB Video Class driver (1.1.1)
[    2.365287] usbcore: registered new interface driver btusb
[    2.365341] bluetooth hci0: firmware: failed to load brcm/BCM20702A0-0a5c-21e6.hcd (-2)
[    2.365347] bluetooth hci0: Direct firmware load failed with error -2
[    2.365348] bluetooth hci0: Falling back to user helper
[    2.367750] AVX version of gcm_enc/dec engaged.
[    2.369719] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    2.378181] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    2.378185] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    2.378188] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[    2.378191] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[    2.378245] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[    2.379124] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[    2.379137] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.379139] [drm] Driver supports precise vblank timestamp query.
[    2.379217] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.386682] alg: No test for crc32 (crc32-pclmul)
[    2.407140] Switched to clocksource tsc
[    2.413176] intel_rapl: Found RAPL domain package
[    2.413181] intel_rapl: Found RAPL domain core
[    2.413183] intel_rapl: Found RAPL domain uncore
[    2.417739] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    2.418304] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    2.418491] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    2.425763] FAT-fs (sda3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    2.427855] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    2.448411] Bluetooth: hci0: BCM: patch brcm/BCM20702A0-0a5c-21e6.hcd not found
[    2.459300] device-mapper: uevent: version 1.0.3
[    2.459380] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    2.462930] cfg80211: World regulatory domain updated:
[    2.462933] cfg80211:  DFS Master region: unset
[    2.462934] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    2.462936] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    2.462937] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    2.462938] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    2.462939] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    2.462941] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    2.462942] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    2.462943] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    2.462944] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    2.491226] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[    2.508444] fbcon: inteldrmfb (fb0) is primary device
[    2.774918] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[    2.774920] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
[    3.212483] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800, board id: 1611, fw id: 1099905
[    3.212495] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    3.252534] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    3.324927] Console: switching to colour frame buffer device 170x48
[    3.329897] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.329900] i915 0000:00:02.0: registered panic notifier
[    3.339307] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.363951] usbcore: registered new interface driver cdc_wdm
[    3.368066] qmi_wwan 1-4:1.0: cdc-wdm0: USB WDM device
[    3.368376] qmi_wwan 1-4:1.0 wwan0: register 'qmi_wwan' at usb-0000:00:14.0-4, WWAN/QMI device, 52:46:0c:64:16:ed
[    3.368461] usbcore: registered new interface driver qmi_wwan
[    3.404588] acpi device:06: registered as cooling_device5
[    3.404687] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    3.404830] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.404957] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\PMIO) (20140424/utaddress-258)
[    3.404968] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.404974] ACPI Warning: SystemIO range 0x00000000000004c0-0x00000000000004cf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140424/utaddress-258)
[    3.404981] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.404983] ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140424/utaddress-258)
[    3.404989] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.404992] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140424/utaddress-258)
[    3.404998] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.405001] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.405648] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    3.406644] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[    3.410478] iTCO_vendor_support: vendor-support=0
[    3.411007] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.411053] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[    3.411135] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.421086] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    3.421091] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.421094] sound hdaudioC0D0:    hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[    3.421095] sound hdaudioC0D0:    mono: mono_out=0x0
[    3.421097] sound hdaudioC0D0:    inputs:
[    3.421100] sound hdaudioC0D0:      Mic=0x18
[    3.421102] sound hdaudioC0D0:      Dock Mic=0x19
[    3.421104] sound hdaudioC0D0:      Internal Mic=0x12
[    3.436406] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input11
[    3.438393] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    3.438495] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    3.438588] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    3.438687] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    3.438780] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    3.438882] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    3.438974] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    3.781114] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    6.137639] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    6.455993] random: nonblocking pool is initialized
[    7.435341] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    7.635698] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
[   11.397787] NET: Registered protocol family 38
[   11.467278] XFS (dm-0): Mounting V4 Filesystem
[   11.490982] XFS (dm-0): Ending clean mount
[   11.503980] systemd-journald[203]: Received request to flush runtime journal from PID 1
[   11.860690] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.860691] Bluetooth: BNEP filters: protocol multicast
[   11.860697] Bluetooth: BNEP socket layer initialized
[   14.456860] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[   14.558216] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[   14.558424] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.560859] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   14.568157] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   14.834370] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   14.841251] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   14.926747] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.280591] wlan0: authenticate with f0:84:2f:e4:66:79
[   18.284626] wlan0: send auth to f0:84:2f:e4:66:79 (try 1/3)
[   18.287327] wlan0: authenticated
[   18.287563] wlan0: waiting for beacon from f0:84:2f:e4:66:79
[   18.326859] wlan0: associate with f0:84:2f:e4:66:79 (try 1/3)
[   18.330313] wlan0: RX AssocResp from f0:84:2f:e4:66:79 (capab=0x411 status=0 aid=3)
[   18.349996] wlan0: associated
[   18.350057] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   18.350121] cfg80211: Calling CRDA for country: CH
[   18.352166] cfg80211: Regulatory domain changed to country: CH
[   18.352169] cfg80211:  DFS Master region: ETSI
[   18.352170] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   18.352172] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   18.352173] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   18.352175] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   18.352176] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[   18.352177] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)