[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.12-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-14) ) #1 SMP Debian 3.12.9-1 (2014-02-01)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.12-1-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000acecffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000aced0000-0x00000000acffffff] type 16
[    0.000000] BIOS-e820: [mem 0x00000000ad000000-0x00000000af9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000044e5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 2325TLU, BIOS 4.0-5457-gca4f4b8 02/09/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x44e600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0AD000000 mask FFF000000 uncachable
[    0.000000]   1 base 0AE000000 mask FFE000000 uncachable
[    0.000000]   2 base 0B0000000 mask FF0000000 uncachable
[    0.000000]   3 base 0C0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0D0000000 mask FF0000000 write-combining
[    0.000000]   5 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xaced0 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01a91000, 0x01a91fff] PGTABLE
[    0.000000] BRK [0x01a92000, 0x01a92fff] PGTABLE
[    0.000000] BRK [0x01a93000, 0x01a93fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x44e400000-0x44e5fffff]
[    0.000000]  [mem 0x44e400000-0x44e5fffff] page 2M
[    0.000000] BRK [0x01a94000, 0x01a94fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x44c000000-0x44e3fffff]
[    0.000000]  [mem 0x44c000000-0x44e3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x400000000-0x44bffffff]
[    0.000000]  [mem 0x400000000-0x44bffffff] page 2M
[    0.000000] BRK [0x01a95000, 0x01a95fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xacecffff]
[    0.000000]  [mem 0x40200000-0xacdfffff] page 2M
[    0.000000]  [mem 0xace00000-0xacecffff] page 4k
[    0.000000] BRK [0x01a96000, 0x01a96fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[    0.000000]  [mem 0x100000000-0x3ffffffff] page 2M
[    0.000000] RAMDISK: [mem 0x360de000-0x37066fff]
[    0.000000] ACPI: RSDP 00000000000f0000 00024 (v02 CORE  )
[    0.000000] ACPI: XSDT 00000000acee14e0 0004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 00000000acee4b70 000F4 (v03 CORE   COREBOOT 00000000 CORE 00000001)
[    0.000000] ACPI: DSDT 00000000acee1650 0351A (v02 COREv4 COREBOOT 20110725 INTL 20140114)
[    0.000000] ACPI: FACS 00000000acee1610 00040
[    0.000000] ACPI: HPET 00000000acee4c70 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 00000000acee4cb0 0006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: MCFG 00000000acee4d20 0003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 00000000acee5c20 0122C (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000044e5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x44e5fffff]
[    0.000000]   NODE_DATA [mem 0x44e5ee000-0x44e5f1fff]
[    0.000000]  [ffffea0000000000-ffffea000f1fffff] PMD -> [ffff88043dc00000-ffff88044bdfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x44e5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009ffff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xacecffff]
[    0.000000]   node   0: [mem 0x100000000-0x44e5fffff]
[    0.000000] On node 0 totalpages: 4173935
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9614 pages used for memmap
[    0.000000]   DMA32 zone: 703184 pages, LIFO batch:31
[    0.000000]   Normal zone: 47397 pages used for memmap
[    0.000000]   Normal zone: 3466752 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xaced0000-0xacffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xad000000-0xaf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[    0.000000] e820: [mem 0xafa00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88044e200000 s85888 r8192 d20608 u524288
[    0.000000] pcpu-alloc: s85888 r8192 d20608 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4116846
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12-1-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16370648K/16695740K available (4723K kernel code, 679K rwdata, 1596K rodata, 972K init, 944K bss, 325092K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2793.525 MHz processor
[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.05 BogoMIPS (lpj=11174100)
[    0.000003] pid_max: default: 32768 minimum: 301
[    0.000024] Security Framework initialized
[    0.000028] AppArmor: AppArmor disabled by boot time parameter
[    0.000029] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.000789] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.004301] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.005890] Mount-cache hash table entries: 256
[    0.006028] Initializing cgroup subsys memory
[    0.006037] Initializing cgroup subsys devices
[    0.006039] Initializing cgroup subsys freezer
[    0.006040] Initializing cgroup subsys net_cls
[    0.006041] Initializing cgroup subsys blkio
[    0.006042] Initializing cgroup subsys perf_event
[    0.006062] CPU: Physical Processor ID: 0
[    0.006063] CPU: Processor Core ID: 0
[    0.006384] mce: CPU supports 7 MCE banks
[    0.006394] CPU0: Thermal monitoring enabled (TM1)
[    0.006402] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.006402] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.006402] tlb_flushall_shift: 1
[    0.006499] Freeing SMP alternatives memory: 20K (ffffffff8199e000 - ffffffff819a3000)
[    0.007381] ACPI: Core revision 20130725
[    0.009051] ACPI: All ACPI Tables successfully acquired
[    0.009702] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.049433] smpboot: CPU0: Intel(R) Core(TM) i5-3360M CPU @ 2.80GHz (fam: 06, model: 3a, stepping: 09)
[    0.049440] TSC deadline timer enabled
[    0.049447] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.049452] ... version:                3
[    0.049453] ... bit width:              48
[    0.049454] ... generic registers:      4
[    0.049455] ... value mask:             0000ffffffffffff
[    0.049455] ... max period:             0000ffffffffffff
[    0.049456] ... fixed-purpose events:   3
[    0.049457] ... event mask:             000000070000000f
[    0.063159] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.049654] smpboot: Booting Node   0, Processors  #   1 #   2 #   3 OK
[    0.090239] Brought up 4 CPUs
[    0.090242] smpboot: Total of 4 processors activated (22348.20 BogoMIPS)
[    0.093018] devtmpfs: initialized
[    0.095843] NET: Registered protocol family 16
[    0.095910] cpuidle: using governor ladder
[    0.095912] cpuidle: using governor menu
[    0.095930] ACPI: bus type PCI registered
[    0.095932] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.095971] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.095973] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.099678] PCI: Using configuration type 1 for base access
[    0.100225] bio: create slab <bio-0> at 0
[    0.100313] ACPI: Added _OSI(Module Device)
[    0.100314] ACPI: Added _OSI(Processor Device)
[    0.100315] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.100316] ACPI: Added _OSI(Processor Aggregator Device)
[    0.100852] ACPI: EC: Look up EC in DSDT
[    0.102526] ACPI: Interpreter enabled
[    0.102530] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[    0.102533] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[    0.102543] ACPI: (supports S0 S3 S4 S5)
[    0.102544] ACPI: Using IOAPIC for interrupt routing
[    0.102562] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.102634] ACPI: No dock devices found.
[    0.106365] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.106394] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    0.106418] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[    0.106493] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.106613] PCI host bridge to bus 0000:00
[    0.106615] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.106616] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.106618] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.106619] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.106620] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.106622] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.106623] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.106624] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[    0.106626] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.106627] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.106628] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.106629] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.106631] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.106632] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.106633] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.106634] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.106636] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[    0.106637] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfebfffff]
[    0.106638] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.106645] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.106713] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.106722] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[    0.106727] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.106731] pci 0000:00:02.0: reg 0x20: [io  0x1800-0x183f]
[    0.106805] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.106826] pci 0000:00:14.0: reg 0x10: [mem 0xe0620000-0xe062ffff 64bit]
[    0.106894] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.106923] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.106953] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.106974] pci 0000:00:16.0: reg 0x10: [mem 0xe0636100-0xe063610f 64bit]
[    0.107047] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.107108] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.107126] pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff]
[    0.107134] pci 0000:00:19.0: reg 0x14: [mem 0xe0634000-0xe0634fff]
[    0.107142] pci 0000:00:19.0: reg 0x18: [io  0x1840-0x185f]
[    0.107202] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.107257] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.107276] pci 0000:00:1a.0: reg 0x10: [mem 0xe0635800-0xe0635bff]
[    0.107362] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.107393] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.107422] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.107436] pci 0000:00:1b.0: reg 0x10: [mem 0xe0630000-0xe0633fff 64bit]
[    0.107500] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.107530] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.107561] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.107687] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.107757] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.107883] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.107951] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.108068] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.108142] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.108162] pci 0000:00:1d.0: reg 0x10: [mem 0xe0635c00-0xe0635fff]
[    0.108248] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.108280] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.108307] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[    0.108457] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.108476] pci 0000:00:1f.2: reg 0x10: [io  0x1880-0x1887]
[    0.108484] pci 0000:00:1f.2: reg 0x14: [io  0x1890-0x1893]
[    0.108492] pci 0000:00:1f.2: reg 0x18: [io  0x1888-0x188f]
[    0.108500] pci 0000:00:1f.2: reg 0x1c: [io  0x1894-0x1897]
[    0.108509] pci 0000:00:1f.2: reg 0x20: [io  0x1860-0x187f]
[    0.108517] pci 0000:00:1f.2: reg 0x24: [mem 0xe0635000-0xe06357ff]
[    0.108564] pci 0000:00:1f.2: PME# supported from D3hot
[    0.108614] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.108628] pci 0000:00:1f.3: reg 0x10: [mem 0xe0636000-0xe06360ff 64bit]
[    0.108648] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.108826] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[    0.108851] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[    0.108871] pci 0000:01:00.0: proprietary Ricoh MMC controller disabled (via firewire function)
[    0.108872] pci 0000:01:00.0: MMC cards are now supported by standard SDHCI controller
[    0.108916] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe04000ff]
[    0.109188] pci 0000:01:00.0: supports D1 D2
[    0.109189] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.109302] pci 0000:01:00.1: [1180:e232] type 00 class 0x088000
[    0.109338] pci 0000:01:00.1: reg 0x10: [mem 0xe0400100-0xe04001ff]
[    0.109611] pci 0000:01:00.1: supports D1 D2
[    0.109612] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.116950] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.116962] pci 0000:00:1c.0:   bridge window [mem 0xe0400000-0xe04fffff]
[    0.117211] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000
[    0.117361] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0501fff 64bit]
[    0.118069] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.129059] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.129068] pci 0000:00:1c.1:   bridge window [mem 0xe0500000-0xe05fffff]
[    0.129160] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.129342] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[    0.129382] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
[    0.129420] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[    0.129457] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
[    0.129494] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.129530] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.129567] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.129603] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.129958] ACPI: \_SB_.PCI0: notify handler is installed
[    0.129981] Found 1 acpi root devices
[    0.130013] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.130072] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.130074] vgaarb: loaded
[    0.130075] vgaarb: bridge control possible 0000:00:02.0
[    0.130103] PCI: Using ACPI for IRQ routing
[    0.131575] PCI: pci_cache_line_size set to 64 bytes
[    0.131688] e820: reserve RAM buffer [mem 0xaced0000-0xafffffff]
[    0.131690] e820: reserve RAM buffer [mem 0x44e600000-0x44fffffff]
[    0.131767] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.131771] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.133793] Switched to clocksource hpet
[    0.134923] pnp: PnP ACPI init
[    0.134931] ACPI: bus type PNP registered
[    0.134976] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.134978] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.134979] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.134981] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.134983] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.134984] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.134986] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.134987] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.134989] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[    0.134990] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[    0.134992] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.135260] pnp 00:01: [dma 4]
[    0.135275] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.135295] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.135364] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.135366] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.135390] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.135415] system 00:05: [io  0x0500-0x057f] could not be reserved
[    0.135417] system 00:05: [io  0x0480-0x04bf] has been reserved
[    0.135418] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.135434] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.135459] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.135483] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.135492] pnp: PnP ACPI: found 9 devices
[    0.135493] ACPI: bus type PNP unregistered
[    0.141383] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.141385] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[    0.141387] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[    0.141391] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.141393] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.141394] pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.141398] pci 0000:00:1c.2: BAR 14: assigned [mem 0xafa00000-0xafbfffff]
[    0.141401] pci 0000:00:1c.2: BAR 15: assigned [mem 0xafc00000-0xafdfffff 64bit pref]
[    0.141403] pci 0000:00:1c.2: BAR 13: assigned [io  0x2000-0x2fff]
[    0.141405] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.141412] pci 0000:00:1c.0:   bridge window [mem 0xe0400000-0xe04fffff]
[    0.141423] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.141430] pci 0000:00:1c.1:   bridge window [mem 0xe0500000-0xe05fffff]
[    0.141441] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.141444] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.141450] pci 0000:00:1c.2:   bridge window [mem 0xafa00000-0xafbfffff]
[    0.141455] pci 0000:00:1c.2:   bridge window [mem 0xafc00000-0xafdfffff 64bit pref]
[    0.141463] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.141464] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.141466] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.141467] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.141468] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.141470] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.141471] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.141472] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.141474] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.141475] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.141476] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.141477] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.141479] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.141480] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.141481] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[    0.141483] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[    0.141484] pci_bus 0000:00: resource 20 [mem 0xafa00000-0xfebfffff]
[    0.141485] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
[    0.141487] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
[    0.141488] pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff]
[    0.141490] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.141491] pci_bus 0000:03: resource 1 [mem 0xafa00000-0xafbfffff]
[    0.141492] pci_bus 0000:03: resource 2 [mem 0xafc00000-0xafdfffff 64bit pref]
[    0.141542] NET: Registered protocol family 2
[    0.141774] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    0.142059] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.142161] TCP: Hash tables configured (established 131072 bind 65536)
[    0.142176] TCP: reno registered
[    0.142191] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.142236] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.142332] NET: Registered protocol family 1
[    0.142343] pci 0000:00:02.0: Boot video device
[    0.142408] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.142410] pci 0000:00:14.0: PCI INT A: no GSI
[    0.142486] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.142736] PCI: CLS 64 bytes, default 64
[    0.142770] Unpacking initramfs...
[    0.374525] Freeing initrd memory: 15908K (ffff8800360de000 - ffff880037067000)
[    0.374530] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.374532] software IO TLB [mem 0xa8ed0000-0xaced0000] (64MB) mapped at [ffff8800a8ed0000-ffff8800acecffff]
[    0.374702] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
[    0.374708] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
[    0.374717] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
[    0.374724] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
[    0.374769] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.374944] audit: initializing netlink socket (disabled)
[    0.374954] type=2000 audit(1391981920.372:1): initialized
[    0.386177] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.386898] VFS: Disk quotas dquot_6.5.2
[    0.386916] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.386974] msgmni has been set to 32005
[    0.387212] alg: No test for stdrng (krng)
[    0.387231] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.387261] io scheduler noop registered
[    0.387262] io scheduler deadline registered
[    0.387277] io scheduler cfq registered (default)
[    0.387416] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.387564] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.387641] pcieport 0000:00:1c.2: enabling device (0104 -> 0107)
[    0.387715] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.387829] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.387831] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.387832] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[    0.387837] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.387857] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.387858] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.387862] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.387882] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.387887] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.387894] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.387927] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 1e14 ss_vid 8086 ss_did 1e14
[    0.387956] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[    0.387959] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.387978] intel_idle: MWAIT substates: 0x21120
[    0.387979] intel_idle: v0.4 model 0x3A
[    0.387979] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.388068] GHES: HEST is not enabled!
[    0.388105] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.388430] Linux agpgart interface v0.103
[    0.388492] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.390471] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.390475] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.390560] mousedev: PS/2 mouse device common for all mice
[    0.390591] rtc_cmos 00:06: RTC can wake from S4
[    0.390708] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.390734] rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.390739] Intel P-state driver initializing.
[    0.390746] Intel pstate controlling: cpu 0
[    0.390760] Intel pstate controlling: cpu 1
[    0.390770] Intel pstate controlling: cpu 2
[    0.390777] Intel pstate controlling: cpu 3
[    0.390794] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.390795] AMD IOMMUv2 functionality not available on this system
[    0.390854] TCP: cubic registered
[    0.390921] NET: Registered protocol family 10
[    0.391063] mip6: Mobile IPv6
[    0.391065] NET: Registered protocol family 17
[    0.391067] mpls_gso: MPLS GSO support
[    0.391249] registered taskstats version 1
[    0.392169] rtc_cmos 00:06: setting system clock to 2014-02-09 21:38:41 UTC (1391981921)
[    0.392196] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.392292] PM: Hibernation image not present or could not be loaded.
[    0.392744] Freeing unused kernel memory: 972K (ffffffff818ab000 - ffffffff8199e000)
[    0.392745] Write protecting the kernel read-only data: 8192k
[    0.395120] Freeing unused kernel memory: 1408K (ffff8800014a0000 - ffff880001600000)
[    0.395898] Freeing unused kernel memory: 452K (ffff88000178f000 - ffff880001800000)
[    0.472840] systemd-udevd[70]: starting version 204
[    0.484709] ACPI: bus type USB registered
[    0.484742] usbcore: registered new interface driver usbfs
[    0.484755] usbcore: registered new interface driver hub
[    0.486942] usbcore: registered new device driver usb
[    0.487624] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    0.487629] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    0.487657] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    0.487662] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.487670] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.487777] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.487808] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[    0.487904] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.487907] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.487910] usb usb1: Product: xHCI Host Controller
[    0.487912] usb usb1: Manufacturer: Linux 3.12-1-amd64 xhci_hcd
[    0.487914] usb usb1: SerialNumber: 0000:00:14.0
[    0.489094] hub 1-0:1.0: USB hub found
[    0.489109] hub 1-0:1.0: 4 ports detected
[    0.489248] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.489254] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.489408] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.489412] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.489414] usb usb2: Product: xHCI Host Controller
[    0.489417] usb usb2: Manufacturer: Linux 3.12-1-amd64 xhci_hcd
[    0.489419] usb usb2: SerialNumber: 0000:00:14.0
[    0.489537] hub 2-0:1.0: USB hub found
[    0.489550] hub 2-0:1.0: 4 ports detected
[    0.489706] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.490028] ehci-pci: EHCI PCI platform driver
[    0.490266] pps_core: LinuxPPS API ver. 1 registered
[    0.490269] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.491595] PTP clock support registered
[    0.492208] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    0.492211] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    0.502698] thermal LNXTHERM:00: registered as thermal_zone0
[    0.502702] ACPI: Thermal Zone [THM0] (64 C)
[    0.503154] thermal LNXTHERM:01: registered as thermal_zone1
[    0.503156] ACPI: Thermal Zone [THM1] (27 C)
[    0.503487] sdhci: Secure Digital Host Controller Interface driver
[    0.503489] sdhci: Copyright(c) Pierre Ossman
[    0.503683] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[    0.503984] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[    0.514514] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.514526] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.514536] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.514553] ehci-pci 0000:00:1a.0: debug port 2
[    0.518451] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.518594] SCSI subsystem initialized
[    0.518656] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0635800
[    0.520152] libata version 3.00 loaded.
[    0.520577] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    0.522795] alg: No test for crc32 (crc32-pclmul)
[    0.530311] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.530389] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.530392] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.530394] usb usb3: Product: EHCI Host Controller
[    0.530395] usb usb3: Manufacturer: Linux 3.12-1-amd64 ehci_hcd
[    0.530396] usb usb3: SerialNumber: 0000:00:1a.0
[    0.530511] hub 3-0:1.0: USB hub found
[    0.530525] hub 3-0:1.0: 3 ports detected
[    0.530743] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.530748] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.530752] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    0.530764] ehci-pci 0000:00:1d.0: debug port 2
[    0.534673] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.534689] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0635c00
[    0.546325] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.546392] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    0.546393] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.546395] usb usb4: Product: EHCI Host Controller
[    0.546396] usb usb4: Manufacturer: Linux 3.12-1-amd64 ehci_hcd
[    0.546397] usb usb4: SerialNumber: 0000:00:1d.0
[    0.548470] hub 4-0:1.0: USB hub found
[    0.548476] hub 4-0:1.0: 3 ports detected
[    0.548590] e1000e 0000:00:19.0: setting latency timer to 64
[    0.548649] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.548680] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[    0.746800] e1000e 0000:00:19.0 eth0: registered PHC clock
[    0.746805] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:6a:16:ab
[    0.746807] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    0.746858] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    0.746902] ahci 0000:00:1f.2: version 3.0
[    0.747028] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    0.747060] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.762694] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[    0.762707] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    0.762713] ahci 0000:00:1f.2: setting latency timer to 64
[    0.765005] scsi0 : ahci
[    0.765177] scsi1 : ahci
[    0.765275] scsi2 : ahci
[    0.765400] scsi3 : ahci
[    0.765493] scsi4 : ahci
[    0.765564] scsi5 : ahci
[    0.765603] ata1: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635100 irq 45
[    0.765606] ata2: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635180 irq 45
[    0.765608] ata3: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635200 irq 45
[    0.765609] ata4: DUMMY
[    0.765609] ata5: DUMMY
[    0.765610] ata6: DUMMY
[    0.842831] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    0.975351] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[    0.975356] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.975830] hub 3-1:1.0: USB hub found
[    0.975917] hub 3-1:1.0: 6 ports detected
[    1.083074] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.083474] ata1.00: supports DRM functions and may not be fully accessible
[    1.083699] ata1.00: disabling queued TRIM support
[    1.083704] ata1.00: ATA-9: Crucial_CT960M500SSD1, MU02, max UDMA/133
[    1.083706] ata1.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.084671] ata1.00: supports DRM functions and may not be fully accessible
[    1.084914] ata1.00: disabling queued TRIM support
[    1.085509] ata1.00: configured for UDMA/133
[    1.085790] scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT960M50 MU02 PQ: 0 ANSI: 5
[    1.087114] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.219647] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[    1.219653] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.220050] hub 4-1:1.0: USB hub found
[    1.220222] hub 4-1:1.0: 8 ports detected
[    1.291483] usb 3-1.3: new full-speed USB device number 3 using ehci-pci
[    1.375438] tsc: Refined TSC clocksource calibration: 2793.654 MHz
[    1.384990] usb 3-1.3: New USB device found, idVendor=147e, idProduct=2020
[    1.384996] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.384999] usb 3-1.3: Product: Biometric Coprocessor
[    1.385002] usb 3-1.3: Manufacturer: Auth
[    1.403484] ata2: SATA link down (SStatus 0 SControl 300)
[    1.455667] usb 3-1.4: new full-speed USB device number 4 using ehci-pci
[    1.551662] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[    1.551669] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.551672] usb 3-1.4: Product: BCM20702A0
[    1.551674] usb 3-1.4: Manufacturer: Broadcom Corp
[    1.551677] usb 3-1.4: SerialNumber: 2016D8D6A3C7
[    1.623899] usb 3-1.6: new high-speed USB device number 5 using ehci-pci
[    1.724006] usb 3-1.6: New USB device found, idVendor=5986, idProduct=02d2
[    1.724012] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.724015] usb 3-1.6: Product: Integrated Camera
[    1.724018] usb 3-1.6: Manufacturer: Ricoh Company Ltd.
[    1.731892] ata3: SATA link down (SStatus 0 SControl 300)
[    1.736352] sd 0:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
[    1.736356] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.736494] sd 0:0:0:0: [sda] Write Protect is off
[    1.736497] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.736530] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.738116]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
[    1.738751] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.740424] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.796033] usb 4-1.4: new high-speed USB device number 3 using ehci-pci
[    1.807472] device-mapper: uevent: version 1.0.3
[    1.807534] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[    1.879971] raid6: sse2x1    7125 MB/s
[    1.889891] usb 4-1.4: config 1 has an invalid interface number: 1 but max is 0
[    1.889894] usb 4-1.4: config 1 has no interface number 0
[    1.891768] usb 4-1.4: New USB device found, idVendor=05c6, idProduct=9204
[    1.891770] usb 4-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[    1.891772] usb 4-1.4: Product: Qualcomm Gobi 2000
[    1.891774] usb 4-1.4: Manufacturer: Qualcomm Incorporated
[    1.948052] raid6: sse2x2   10637 MB/s
[    2.016131] raid6: sse2x4   13891 MB/s
[    2.016133] raid6: using algorithm sse2x4 (13891 MB/s)
[    2.016134] raid6: using ssse3x2 recovery algorithm
[    2.016371] xor: automatically using best checksumming function:
[    2.056178]    avx       : 26849.000 MB/sec
[    2.057861] bio: create slab <bio-1> at 1
[    2.058003] Btrfs loaded
[    2.123162] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    2.124522] XFS (sda4): Mounting Filesystem
[    2.177573] XFS (sda4): Ending clean mount
[    2.318780] systemd-udevd[415]: starting version 204
[    2.376768] Switched to clocksource tsc
[    2.396314] ACPI: Requesting acpi_cpufreq
[    2.398532] mei_me 0000:00:16.0: setting latency timer to 64
[    2.398570] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[    2.401661] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0E:00/input/input2
[    2.401667] ACPI: Sleep Button [SLPB]
[    2.401709] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0D:00/input/input3
[    2.402554] ACPI: Lid Switch [LID]
[    2.402609] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    2.402613] ACPI: Power Button [PWRF]
[    2.406003] [drm] Initialized drm 1.1.0 20060810
[    2.409564] cfg80211: Calling CRDA to update world regulatory domain
[    2.412734] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    2.412737] Copyright(c) 2003-2013 Intel Corporation
[    2.418941] Non-volatile memory driver v1.3
[    2.427972] udevd[569]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[    2.441044] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    2.441574] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    2.444187] udevd[603]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[    2.446433] udevd[604]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[    2.454146] iwlwifi 0000:02:00.0: irq 47 for MSI/MSI-X
[    2.454271] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[    2.458226] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[    2.458369] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    2.463329] udevd[658]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[    2.464036] udevd[660]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[    2.466681] udevd[665]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[    2.469221] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[    2.469502] udevd[677]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[    2.471075] udevd[680]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[    2.473826] usbcore: registered new interface driver usbserial
[    2.473838] usbcore: registered new interface driver usbserial_generic
[    2.473846] usbserial: USB Serial support registered for generic
[    2.474782] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    2.474789] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    2.474791] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[    2.474793] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[    2.474945] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[    2.478088] usbcore: registered new interface driver qcserial
[    2.478098] usbserial: USB Serial support registered for Qualcomm USB modem
[    2.478122] qcserial 4-1.4:1.1: Qualcomm USB modem converter detected
[    2.478244] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    2.478301] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    2.478354] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    2.478370] usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB0
[    2.478418] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    2.478457] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    2.478495] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    2.478536] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    2.478770] ACPI Warning: 0x0000000000000528-0x000000000000052f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
[    2.478774] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.478778] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[    2.478781] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.478782] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[    2.478784] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.478786] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.481646] acpi device:07: registered as cooling_device5
[    2.481702] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.481736] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15
[    2.490361] ACPI: Battery Slot [BAT0] (battery present)
[    2.490489] ACPI: Battery Slot [BAT1] (battery absent)
[    2.490716] ACPI: AC Adapter [AC] (on-line)
[    2.498294] Bluetooth: Core ver 2.16
[    2.498306] NET: Registered protocol family 31
[    2.498307] Bluetooth: HCI device and connection manager initialized
[    2.498313] Bluetooth: HCI socket layer initialized
[    2.498315] Bluetooth: L2CAP socket layer initialized
[    2.498320] Bluetooth: SCO socket layer initialized
[    2.498832] udevd[716]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[    2.501959] udevd[726]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[    2.502487] usbcore: registered new interface driver btusb
[    2.503721] media: Linux media interface: v0.10
[    2.505088] udevd[733]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[    2.505269] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    2.505831] Linux video capture interface: v2.00
[    2.506436] [drm] Memory usable by graphics device = 2048M
[    2.506442] i915 0000:00:02.0: setting latency timer to 64
[    2.515024] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d2)
[    2.528582] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[    2.528591] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.528592] [drm] Driver supports precise vblank timestamp query.
[    2.528656] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.529661] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input16
[    2.529783] usbcore: registered new interface driver uvcvideo
[    2.529785] USB Video Class driver (1.1.1)
[    2.532866] udevd[778]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[    2.539592] iTCO_vendor_support: vendor-support=0
[    2.540504] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    2.540533] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[    2.540584] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.575502] cfg80211: World regulatory domain updated:
[    2.575505] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    2.575507] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    2.575508] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    2.575509] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    2.575509] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    2.575510] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    2.652928] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[    2.670847] fbcon: inteldrmfb (fb0) is primary device
[    3.284031] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800, board id: 1611, fw id: 1099905
[    3.284039] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    3.323628] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    3.514790] Console: switching to colour frame buffer device 170x48
[    3.519123] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.519126] i915 0000:00:02.0: registered panic notifier
[    3.519148] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.822658] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    5.663344] usb 4-1.4: USB disconnect, device number 3
[    5.663608] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[    5.663645] qcserial 4-1.4:1.1: device disconnected
[    5.668520] udevd[1330]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[    5.673180] udevd[1337]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[    6.179681] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    6.898349] usb 4-1.4: new high-speed USB device number 4 using ehci-pci
[    7.001693] usb 4-1.4: New USB device found, idVendor=05c6, idProduct=9205
[    7.001700] usb 4-1.4: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[    7.001703] usb 4-1.4: Product: Qualcomm Gobi 2000
[    7.001706] usb 4-1.4: Manufacturer: Qualcomm Incorporated
[    7.005766] qcserial 4-1.4:1.1: Qualcomm USB modem converter detected
[    7.005901] usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB0
[    7.007127] qcserial 4-1.4:1.2: Qualcomm USB modem converter detected
[    7.007291] usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB1
[    7.009136] qcserial 4-1.4:1.3: Qualcomm USB modem converter detected
[    7.009300] usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB2
[    7.024030] udevd[1356]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[    7.027313] udevd[1362]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[    7.027476] udevd[1364]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[    7.035513] usbcore: registered new interface driver cdc_wdm
[    7.039432] qmi_wwan 4-1.4:1.0: cdc-wdm0: USB WDM device
[    7.039625] qmi_wwan 4-1.4:1.0 wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.4, WWAN/QMI device, 82:db:af:13:05:09
[    7.039655] usbcore: registered new interface driver qmi_wwan
[    7.040291] udevd[1383]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[    7.488618] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    7.690524] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input17
[   11.087959] bio: create slab <bio-2> at 2
[   11.155352] bio: create slab <bio-2> at 2
[   11.212083] loop: module loaded
[   11.218630] fuse init (API version 7.22)
[   11.314723] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   11.317371] FAT-fs (sda3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   11.317910] XFS (dm-0): Mounting Filesystem
[   11.394162] XFS (dm-0): Ending clean mount
[   11.402906] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   11.403578] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   12.027893] Bluetooth: RFCOMM TTY layer initialized
[   12.027904] Bluetooth: RFCOMM socket layer initialized
[   12.027906] Bluetooth: RFCOMM ver 1.11
[   12.029955] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[   12.036923] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.036926] Bluetooth: BNEP filters: protocol multicast
[   12.036990] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   12.037517] Bluetooth: BNEP socket layer initialized
[   12.304289] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[   12.311163] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   12.390513] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.518333] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[   12.621415] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[   12.621665] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.906720] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input18
[   13.202829] systemd-logind[3110]: New seat seat0.
[   13.203296] systemd-logind[3110]: Watching system buttons on /dev/input/event3 (Power Button)
[   13.203364] systemd-logind[3110]: Watching system buttons on /dev/input/event13 (Video Bus)
[   13.203426] systemd-logind[3110]: Watching system buttons on /dev/input/event2 (Lid Switch)
[   13.203489] systemd-logind[3110]: Watching system buttons on /dev/input/event1 (Sleep Button)
[   13.204122] systemd-logind[3110]: New session 1 of user Debian-gdm.
[   13.204199] systemd-logind[3110]: Linked /tmp/.X11-unix/X0 to /run/user/114/X11-display.
[   17.447470] systemd-logind[3110]: New session 2 of user phcoder.
[   17.447545] systemd-logind[3110]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
[   19.664785] wlan0: authenticate with 00:24:37:96:06:b0
[   19.669562] wlan0: send auth to 00:24:37:96:06:b0 (try 1/3)
[   19.675501] wlan0: authenticated
[   19.675613] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   19.675616] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   19.678039] wlan0: associate with 00:24:37:96:06:b0 (try 1/3)
[   19.681519] wlan0: RX AssocResp from 00:24:37:96:06:b0 (capab=0x451 status=0 aid=3)
[   19.683405] wlan0: associated
[   19.683426] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready