[    0.000000] Linux version 4.11.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.11.6-1 (2017-06-19)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.11.0-1-amd64 root=UUID=e003fde5-6992-4a84-89f4-69eba1314d2d ro quiet iomem=relaxed
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fb22fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007fb23000-0x000000007fbfffff] type 16
[    0.000000] BIOS-e820: [mem 0x000000007fc00000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 2815H11/2815H11, BIOS CBET4000 4.6-891-gca74434a8a-dirty 07/28/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x270000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 07FC00000 mask FFFC00000 uncachable
[    0.000000]   1 base 080000000 mask FC0000000 uncachable
[    0.000000]   2 base 0C0000000 mask FF0000000 uncachable
[    0.000000]   3 base 0D0000000 mask FF0000000 write-combining
[    0.000000]   4 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7fb23 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f6170-0x000f617f] mapped at [ffff92d0c00f6170]
[    0.000000] Base memory trampoline at [ffff92d0c0099000] 99000 size 24576
[    0.000000] BRK [0x60741000, 0x60741fff] PGTABLE
[    0.000000] BRK [0x60742000, 0x60742fff] PGTABLE
[    0.000000] BRK [0x60743000, 0x60743fff] PGTABLE
[    0.000000] BRK [0x60744000, 0x60744fff] PGTABLE
[    0.000000] BRK [0x60745000, 0x60745fff] PGTABLE
[    0.000000] BRK [0x60746000, 0x60746fff] PGTABLE
[    0.000000] BRK [0x60747000, 0x60747fff] PGTABLE
[    0.000000] BRK [0x60748000, 0x60748fff] PGTABLE
[    0.000000] BRK [0x60749000, 0x60749fff] PGTABLE
[    0.000000] BRK [0x6074a000, 0x6074afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35c53000-0x36e20fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F64B0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000007FB340E0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007FB37840 0000F4 (v03 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000007FB34280 0035B5 (v03 COREv4 COREBOOT 20090419 INTL 20161222)
[    0.000000] ACPI: FACS 0x000000007FB34240 000040
[    0.000000] ACPI: SSDT 0x000000007FB37940 00058D (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x000000007FB37ED0 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x000000007FB37F10 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007FB37F50 000068 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DMAR 0x000000007FB37FC0 000078 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000007FB38040 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000026fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x26fff9000-0x26fffdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000026fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007fb22fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000026fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026fffffff]
[    0.000000] On node 0 totalpages: 2030274
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8109 pages used for memmap
[    0.000000]   DMA32 zone: 518947 pages, LIFO batch:31
[    0.000000]   Normal zone: 23552 pages used for memmap
[    0.000000]   Normal zone: 1507328 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x0000000080000000-0x000000008fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7fb23000-0x7fbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7fc00000-0x8fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x90000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[    0.000000] e820: [mem 0x90000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 37 pages/cpu @ffff92d32fc00000 s111512 r8192 d31848 u1048576
[    0.000000] pcpu-alloc: s111512 r8192 d31848 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1998527
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.0-1-amd64 root=UUID=e003fde5-6992-4a84-89f4-69eba1314d2d ro quiet iomem=relaxed
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7893800K/8121096K available (6464K kernel code, 1175K rwdata, 2788K rodata, 1436K init, 684K bss, 227296K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:33024 nr_irqs:440 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2533.383 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5066.76 BogoMIPS (lpj=10133532)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170119
[    0.011005] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.011088] Security Framework initialized
[    0.011091] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.011102] AppArmor: AppArmor disabled by boot time parameter
[    0.011969] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.016373] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.018503] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.018519] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.019003] CPU: Physical Processor ID: 0
[    0.019004] CPU: Processor Core ID: 0
[    0.019007] mce: CPU supports 6 MCE banks
[    0.019017] CPU0: Thermal monitoring enabled (TM2)
[    0.019021] process: using mwait in idle threads
[    0.019027] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.019029] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.019214] Freeing SMP alternatives memory: 24K
[    0.024027] ftrace: allocating 25929 entries in 102 pages
[    0.036119] smpboot: Max logical packages: 1
[    0.036132] DMAR: Host address width 36
[    0.036134] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.036142] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30260 ecap 1000
[    0.036143] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[    0.036149] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020630260 ecap 1000
[    0.036151] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[    0.036156] DMAR: dmar2: reg_base_addr fed93000 ver 1:0 cap c9008020630260 ecap 1000
[    0.036536] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.080000] smpboot: CPU0: Intel(R) Core(TM)2 CPU         P9600  @ 2.53GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.080000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.080000] ... version:                2
[    0.080000] ... bit width:              40
[    0.080000] ... generic registers:      2
[    0.080000] ... value mask:             000000ffffffffff
[    0.080000] ... max period:             000000007fffffff
[    0.080000] ... fixed-purpose events:   3
[    0.080000] ... event mask:             0000000700000003
[    0.080000] smp: Bringing up secondary CPUs ...
[    0.080000] x86: Booting SMP configuration:
[    0.080000] .... node  #0, CPUs:      #1
[    0.166034] smp: Brought up 1 node, 2 CPUs
[    0.166034] smpboot: Total of 2 processors activated (10133.62 BogoMIPS)
[    0.166034] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.168095] sched_clock: Marking stable (168000000, 0)->(284264437, -116264437)
[    0.168627] devtmpfs: initialized
[    0.168720] x86/mm: Memory block size: 128MB
[    0.174146] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.174158] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.174225] pinctrl core: initialized pinctrl subsystem
[    0.174394] NET: Registered protocol family 16
[    0.174709] cpuidle: using governor ladder
[    0.174749] cpuidle: using governor menu
[    0.174752] PCCT header not found.
[    0.174789] ACPI: bus type PCI registered
[    0.174791] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.174885] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.174888] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.174901] PCI: Using configuration type 1 for base access
[    0.176548] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.176869] ACPI: Added _OSI(Module Device)
[    0.176870] ACPI: Added _OSI(Processor Device)
[    0.176872] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.176873] ACPI: Added _OSI(Processor Aggregator Device)
[    0.177083] ACPI: Executed 1 blocks of module-level executable AML code
[    0.178686] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.180233] ACPI : EC: EC started
[    0.180234] ACPI : EC: interrupt blocked
[    0.180336] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.180339] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.180341] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.180342] ACPI: Interpreter enabled
[    0.180369] ACPI: (supports S0 S3 S4 S5)
[    0.180371] ACPI: Using IOAPIC for interrupt routing
[    0.180404] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.193290] acpi ACPI0003:01: ACPI dock station (docks/bays count: 1)
[    0.193784] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.193790] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.193864] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.193877] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.193951] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c69ff])
[    0.194267] PCI host bridge to bus 0000:00
[    0.194270] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.194272] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.194274] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.194276] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.194279] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.194281] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.194283] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.194286] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.194288] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.194290] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.194292] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.194294] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.194296] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.194298] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.194300] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.194302] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfebfffff window]
[    0.194305] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.194307] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.194319] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.194348] DMAR: Forcing write-buffer flush capability
[    0.194349] DMAR: Disabling IOMMU for graphics on this chipset
[    0.194487] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[    0.194501] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit]
[    0.194510] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.194517] pci 0000:00:02.0: reg 0x20: [io  0x3400-0x3407]
[    0.194661] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[    0.194674] pci 0000:00:02.1: reg 0x10: [mem 0xe1800000-0xe18fffff 64bit]
[    0.194868] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[    0.194892] pci 0000:00:19.0: reg 0x10: [mem 0xe1b00000-0xe1b1ffff]
[    0.194905] pci 0000:00:19.0: reg 0x14: [mem 0xe1b24000-0xe1b24fff]
[    0.194917] pci 0000:00:19.0: reg 0x18: [io  0x3000-0x301f]
[    0.195012] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.195137] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.195197] pci 0000:00:1a.0: reg 0x20: [io  0x3020-0x303f]
[    0.195347] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.195409] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.195473] pci 0000:00:1a.1: reg 0x20: [io  0x3040-0x305f]
[    0.195621] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.195683] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.195743] pci 0000:00:1a.2: reg 0x20: [io  0x3060-0x307f]
[    0.195889] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    0.195962] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.195986] pci 0000:00:1a.7: reg 0x10: [mem 0xe1b26000-0xe1b263ff]
[    0.196101] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.196179] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.196242] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.196268] pci 0000:00:1b.0: reg 0x10: [mem 0xe1b20000-0xe1b23fff 64bit]
[    0.196385] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.196473] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.196534] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.196651] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.196795] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    0.196912] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.197056] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[    0.197164] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.197306] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[    0.197422] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.197573] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.197634] pci 0000:00:1d.0: reg 0x20: [io  0x3080-0x309f]
[    0.197780] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.197840] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.197900] pci 0000:00:1d.1: reg 0x20: [io  0x30a0-0x30bf]
[    0.198047] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.198108] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.198167] pci 0000:00:1d.2: reg 0x20: [io  0x30c0-0x30df]
[    0.198314] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.198383] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.198408] pci 0000:00:1d.7: reg 0x10: [mem 0xe1b27000-0xe1b273ff]
[    0.198522] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.198600] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.198658] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.198845] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[    0.199115] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[    0.199140] pci 0000:00:1f.2: reg 0x10: [io  0x3408-0x340f]
[    0.199153] pci 0000:00:1f.2: reg 0x14: [io  0x3418-0x341b]
[    0.199165] pci 0000:00:1f.2: reg 0x18: [io  0x3410-0x3417]
[    0.199177] pci 0000:00:1f.2: reg 0x1c: [io  0x341c-0x341f]
[    0.199189] pci 0000:00:1f.2: reg 0x20: [io  0x30e0-0x30ff]
[    0.199201] pci 0000:00:1f.2: reg 0x24: [mem 0xe1b25000-0xe1b257ff]
[    0.199272] pci 0000:00:1f.2: PME# supported from D3hot
[    0.199404] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.199428] pci 0000:00:1f.3: reg 0x10: [mem 0xe1b28000-0xe1b280ff 64bit]
[    0.199460] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.199712] pci 0000:01:00.0: [168c:0030] type 00 class 0x028000
[    0.199769] pci 0000:01:00.0: reg 0x10: [mem 0xe1900000-0xe191ffff 64bit]
[    0.199886] pci 0000:01:00.0: reg 0x30: [mem 0xe1920000-0xe192ffff pref]
[    0.200036] pci 0000:01:00.0: supports D1
[    0.200038] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[    0.211503] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.211511] pci 0000:00:1c.0:   bridge window [mem 0xe1900000-0xe19fffff]
[    0.211621] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[    0.211679] pci 0000:02:00.0: reg 0x10: [mem 0xe1a00000-0xe1a1ffff 64bit]
[    0.211795] pci 0000:02:00.0: reg 0x30: [mem 0xe1a20000-0xe1a2ffff pref]
[    0.211949] pci 0000:02:00.0: supports D1
[    0.211951] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.223501] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.223510] pci 0000:00:1c.1:   bridge window [mem 0xe1a00000-0xe1afffff]
[    0.223586] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.223706] acpiphp: Slot [1] registered
[    0.223749] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[    0.223794] pci 0000:04:00.0: reg 0x10: [mem 0xe0800000-0xe0801fff 64bit]
[    0.224022] pci 0000:04:00.0: PME# supported from D0 D3hot
[    0.224214] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.224220] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.224225] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe08fffff]
[    0.224233] pci 0000:00:1c.3:   bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[    0.224422] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.224437] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.224439] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.224441] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.224443] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[    0.224446] pci 0000:00:1e.0:   bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[    0.224448] pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[    0.224450] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.224452] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.224455] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.224457] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.224459] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.224461] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.224464] pci 0000:00:1e.0:   bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[    0.224466] pci 0000:00:1e.0:   bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[    0.224468] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.224471] pci 0000:00:1e.0:   bridge window [mem 0x90000000-0xfebfffff window] (subtractive decode)
[    0.224473] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.224686] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.224776] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.224862] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.224948] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.225034] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.225121] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.225206] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.225294] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.227673] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.227817] ACPI : EC: interrupt unblocked
[    0.227827] ACPI : EC: event unblocked
[    0.227836] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.227839] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.227955] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.227958] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.227967] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.227968] vgaarb: loaded
[    0.228074] PCI: Using ACPI for IRQ routing
[    0.230582] PCI: pci_cache_line_size set to 64 bytes
[    0.230690] e820: reserve RAM buffer [mem 0x7fb23000-0x7fffffff]
[    0.230902] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.230908] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.230914] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.232993] clocksource: Switched to clocksource hpet
[    0.251321] VFS: Disk quotas dquot_6.6.0
[    0.251362] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.251491] pnp: PnP ACPI init
[    0.251667] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.251669] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.251672] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.251675] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.251678] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.251680] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.251683] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.251685] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.251691] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.252390] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.252395] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.252481] system 00:02: [io  0x0800-0x080f] has been reserved
[    0.252483] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.252486] system 00:02: [io  0x0580-0x05bf] has been reserved
[    0.252490] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.252531] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.252593] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.252645] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.252800] pnp: PnP ACPI: found 6 devices
[    0.260493] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.260557] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.260566] pci 0000:00:1c.0:   bridge window [mem 0xe1900000-0xe19fffff]
[    0.260577] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.260583] pci 0000:00:1c.1:   bridge window [mem 0xe1a00000-0xe1afffff]
[    0.260594] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.260610] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.260613] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.260620] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe08fffff]
[    0.260625] pci 0000:00:1c.3:   bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[    0.260633] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.260649] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.260652] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.260654] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.260656] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.260659] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[    0.260661] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[    0.260663] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.260665] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.260667] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.260669] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.260671] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.260674] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.260676] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.260678] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.260680] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.260682] pci_bus 0000:00: resource 19 [mem 0x90000000-0xfebfffff window]
[    0.260684] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.260687] pci_bus 0000:01: resource 1 [mem 0xe1900000-0xe19fffff]
[    0.260689] pci_bus 0000:02: resource 1 [mem 0xe1a00000-0xe1afffff]
[    0.260692] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.260694] pci_bus 0000:04: resource 1 [mem 0xe0000000-0xe08fffff]
[    0.260696] pci_bus 0000:04: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
[    0.260698] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.260700] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.260702] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.260704] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.260706] pci_bus 0000:05: resource 8 [mem 0x000c8000-0x000cbfff window]
[    0.260708] pci_bus 0000:05: resource 9 [mem 0x000cc000-0x000cffff window]
[    0.260711] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.260713] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.260715] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.260717] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.260719] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.260721] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.260723] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.260726] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window]
[    0.260728] pci_bus 0000:05: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.260730] pci_bus 0000:05: resource 19 [mem 0x90000000-0xfebfffff window]
[    0.260732] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.260874] NET: Registered protocol family 2
[    0.261156] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.261457] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.261929] TCP: Hash tables configured (established 65536 bind 65536)
[    0.261994] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.262063] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.262188] NET: Registered protocol family 1
[    0.262209] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.264827] PCI: CLS 64 bytes, default 64
[    0.264895] Unpacking initramfs...
[    0.795624] Freeing initrd memory: 18232K
[    0.795817] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.795822] software IO TLB [mem 0x7bb23000-0x7fb23000] (64MB) mapped at [ffff92d13bb23000-ffff92d13fb22fff]
[    0.796368] audit: initializing netlink subsys (disabled)
[    0.796471] audit: type=2000 audit(1501254524.792:1): state=initialized audit_enabled=0 res=1
[    0.796978] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.797024] zbud: loaded
[    0.798205] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.798248] io scheduler noop registered
[    0.798249] io scheduler deadline registered
[    0.798268] io scheduler cfq registered (default)
[    0.798269] io scheduler mq-deadline registered
[    0.799534] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[    0.799565] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[    0.799595] pcieport 0000:00:1c.2: Signaling PME with IRQ 26
[    0.799631] pcieport 0000:00:1c.3: Signaling PME with IRQ 27
[    0.799678] efifb: probing for efifb
[    0.799694] efifb: framebuffer at 0xd0000000, using 5120k, total 5120k
[    0.799696] efifb: mode is 1440x900x32, linelength=5760, pages=1
[    0.799697] efifb: scrolling: redraw
[    0.799699] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.804328] Console: switching to colour frame buffer device 180x56
[    0.808772] fb0: EFI VGA frame buffer device
[    0.808785] intel_idle: does not run on family 6 model 23
[    0.817244] Monitor-Mwait will be used to enter C-1 state
[    0.817251] Monitor-Mwait will be used to enter C-2 state
[    0.817255] Monitor-Mwait will be used to enter C-3 state
[    0.817259] sched_clock: Marking unstable (816184134, 997807)<-(933446378, -116264437)
[    0.817261] tsc: Marking TSC unstable due to TSC halts in idle
[    0.817650] GHES: HEST is not enabled!
[    0.817774] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.818480] Linux agpgart interface v0.103
[    0.818712] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.818713] AMD IOMMUv2 functionality not available on this system
[    0.818992] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.830754] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.830760] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.830990] mousedev: PS/2 mouse device common for all mice
[    0.831051] rtc_cmos 00:03: RTC can wake from S4
[    0.831247] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.831278] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.831335] ledtrig-cpu: registered to indicate activity on CPUs
[    0.831686] NET: Registered protocol family 10
[    0.832004] Segment Routing with IPv6
[    0.832025] mip6: Mobile IPv6
[    0.832027] NET: Registered protocol family 17
[    0.832030] mpls_gso: MPLS GSO support
[    0.832262] microcode: sig=0x1067a, pf=0x80, revision=0x0
[    0.832339] microcode: Microcode Update Driver: v2.2.
[    0.832573] registered taskstats version 1
[    0.832593] zswap: loaded using pool lzo/zbud
[    0.832730] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.833253] rtc_cmos 00:03: setting system clock to 2017-07-28 15:08:45 UTC (1501254525)
[    0.833296] PM: Hibernation image not present or could not be loaded.
[    0.835516] Freeing unused kernel memory: 1436K
[    0.835517] Write protecting the kernel read-only data: 12288k
[    0.836471] Freeing unused kernel memory: 1712K
[    0.841499] Freeing unused kernel memory: 1308K
[    0.843932] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.846011] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.920882] pps_core: LinuxPPS API ver. 1 registered
[    0.920885] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.921195] PTP clock support registered
[    0.922978] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.922979] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.923249] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.926269] ACPI: bus type USB registered
[    0.926334] usbcore: registered new interface driver usbfs
[    0.926348] usbcore: registered new interface driver hub
[    0.926625] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.927600] thermal LNXTHERM:00: registered as thermal_zone0
[    0.927602] ACPI: Thermal Zone [THM0] (56 C)
[    0.929054] usbcore: registered new device driver usb
[    0.929101] thermal LNXTHERM:01: registered as thermal_zone1
[    0.929102] ACPI: Thermal Zone [THM1] (52 C)
[    0.929800] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.930073] ehci-pci: EHCI PCI platform driver
[    0.930275] uhci_hcd: USB Universal Host Controller Interface driver
[    0.947469] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.947483] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
[    0.947718] xhci_hcd 0000:04:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[    0.948129] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.948132] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.948134] usb usb1: Product: xHCI Host Controller
[    0.948136] usb usb1: Manufacturer: Linux 4.11.0-1-amd64 xhci-hcd
[    0.948138] usb usb1: SerialNumber: 0000:04:00.0
[    0.948481] hub 1-0:1.0: USB hub found
[    0.948499] hub 1-0:1.0: 2 ports detected
[    0.948663] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.948668] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[    0.950971] SCSI subsystem initialized
[    0.951121] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.951153] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.951156] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.951158] usb usb2: Product: xHCI Host Controller
[    0.951160] usb usb2: Manufacturer: Linux 4.11.0-1-amd64 xhci-hcd
[    0.951162] usb usb2: SerialNumber: 0000:04:00.0
[    0.951317] hub 2-0:1.0: USB hub found
[    0.951333] hub 2-0:1.0: 2 ports detected
[    0.953799] libata version 3.00 loaded.
[    1.127620] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:27:13:b5:a4:cc
[    1.127622] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.127651] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[    1.127888] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.127897] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
[    1.127913] ehci-pci 0000:00:1a.7: debug port 1
[    1.131830] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.131847] ehci-pci 0000:00:1a.7: irq 18, io mem 0xe1b26000
[    1.145046] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.145125] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.145128] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.145130] usb usb3: Product: EHCI Host Controller
[    1.145132] usb usb3: Manufacturer: Linux 4.11.0-1-amd64 ehci_hcd
[    1.145134] usb usb3: SerialNumber: 0000:00:1a.7
[    1.145356] hub 3-0:1.0: USB hub found
[    1.145366] hub 3-0:1.0: 6 ports detected
[    1.145859] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.145867] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[    1.145880] ehci-pci 0000:00:1d.7: debug port 1
[    1.149807] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.149819] ehci-pci 0000:00:1d.7: irq 16, io mem 0xe1b27000
[    1.165046] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.165099] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.165101] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.165103] usb usb4: Product: EHCI Host Controller
[    1.165106] usb usb4: Manufacturer: Linux 4.11.0-1-amd64 ehci_hcd
[    1.165108] usb usb4: SerialNumber: 0000:00:1d.7
[    1.165288] hub 4-0:1.0: USB hub found
[    1.165297] hub 4-0:1.0: 6 ports detected
[    1.165919] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.165927] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
[    1.165936] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.165959] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003020
[    1.166035] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.166038] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.166040] usb usb5: Product: UHCI Host Controller
[    1.166042] usb usb5: Manufacturer: Linux 4.11.0-1-amd64 uhci_hcd
[    1.166044] usb usb5: SerialNumber: 0000:00:1a.0
[    1.166422] hub 5-0:1.0: USB hub found
[    1.166432] hub 5-0:1.0: 2 ports detected
[    1.166746] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.167647] ahci 0000:00:1f.2: version 3.0
[    1.167890] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.167930] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    1.167933] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ccc 
[    1.169102] scsi host0: ahci
[    1.169315] scsi host1: ahci
[    1.169616] scsi host2: ahci
[    1.169768] scsi host3: ahci
[    1.169950] scsi host4: ahci
[    1.170101] scsi host5: ahci
[    1.170177] ata1: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25100 irq 32
[    1.170180] ata2: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25180 irq 32
[    1.170181] ata3: DUMMY
[    1.170182] ata4: DUMMY
[    1.170185] ata5: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25300 irq 32
[    1.170187] ata6: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25380 irq 32
[    1.170376] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.170386] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
[    1.170395] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.170426] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00003040
[    1.170580] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.170583] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.170585] usb usb6: Product: UHCI Host Controller
[    1.170587] usb usb6: Manufacturer: Linux 4.11.0-1-amd64 uhci_hcd
[    1.170589] usb usb6: SerialNumber: 0000:00:1a.1
[    1.170758] hub 6-0:1.0: USB hub found
[    1.170769] hub 6-0:1.0: 2 ports detected
[    1.171042] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.171049] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
[    1.171059] uhci_hcd 0000:00:1a.2: detected 2 ports
[    1.171082] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00003060
[    1.171232] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.171235] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.171237] usb usb7: Product: UHCI Host Controller
[    1.171239] usb usb7: Manufacturer: Linux 4.11.0-1-amd64 uhci_hcd
[    1.171241] usb usb7: SerialNumber: 0000:00:1a.2
[    1.171411] hub 7-0:1.0: USB hub found
[    1.171423] hub 7-0:1.0: 2 ports detected
[    1.171700] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.171708] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
[    1.171716] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.171738] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
[    1.171866] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.171869] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.171871] usb usb8: Product: UHCI Host Controller
[    1.171873] usb usb8: Manufacturer: Linux 4.11.0-1-amd64 uhci_hcd
[    1.171875] usb usb8: SerialNumber: 0000:00:1d.0
[    1.172038] hub 8-0:1.0: USB hub found
[    1.172049] hub 8-0:1.0: 2 ports detected
[    1.172324] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.172332] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
[    1.172341] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.172363] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000030a0
[    1.172491] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[    1.172494] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.172496] usb usb9: Product: UHCI Host Controller
[    1.172498] usb usb9: Manufacturer: Linux 4.11.0-1-amd64 uhci_hcd
[    1.172500] usb usb9: SerialNumber: 0000:00:1d.1
[    1.172663] hub 9-0:1.0: USB hub found
[    1.172673] hub 9-0:1.0: 2 ports detected
[    1.172951] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.172959] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[    1.172969] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.172990] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000030c0
[    1.173072] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[    1.173074] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.173076] usb usb10: Product: UHCI Host Controller
[    1.173078] usb usb10: Manufacturer: Linux 4.11.0-1-amd64 uhci_hcd
[    1.173080] usb usb10: SerialNumber: 0000:00:1d.2
[    1.173242] hub 10-0:1.0: USB hub found
[    1.173251] hub 10-0:1.0: 2 ports detected
[    1.477260] random: fast init done
[    1.484792] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.485035] ata1.00: CFA: LEXAR CFAST 32GB CARD, 20141204, max UDMA/133
[    1.485037] ata1.00: 62533296 sectors, multi 1: LBA48 
[    1.485810] ata1.00: configured for UDMA/133
[    1.486073] scsi 0:0:0:0: Direct-Access     ATA      LEXAR CFAST 32GB 1204 PQ: 0 ANSI: 5
[    1.669075] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[    1.786856] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[    1.825024] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x24846984051, max_idle_ns: 440795208863 ns
[    1.832987] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.837280] ata2.00: ATA-8: WDC WD7500BPKX-00HPJT0, 01.01A01, max UDMA/133
[    1.837282] ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.842290] ata2.00: configured for UDMA/133
[    1.842548] scsi 1:0:0:0: Direct-Access     ATA      WDC WD7500BPKX-0 1A01 PQ: 0 ANSI: 5
[    1.855096] usb 6-1: New USB device found, idVendor=147e, idProduct=2016
[    1.855099] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.855101] usb 6-1: Product: Biometric Coprocessor
[    1.855103] usb 6-1: Manufacturer: UPEK
[    1.867898] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367
[    1.867904] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    1.919732] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.196864] ata5: SATA link down (SStatus 0 SControl 300)
[    2.512598] ata6: SATA link down (SStatus 0 SControl 300)
[    2.516364] sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[    2.516367] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    2.516397] sd 1:0:0:0: [sdb] Write Protect is off
[    2.516399] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.516454] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    2.516467] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.516486] sd 0:0:0:0: [sda] Write Protect is off
[    2.516488] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.516624] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.518043]  sda: sda2 sda3 sda4 < sda5 sda6 sda7 >
[    2.518823] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    2.569277]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[    2.570707] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.661055] usb 6-2: new full-speed USB device number 3 using uhci_hcd
[    2.713556] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    2.996162] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[    3.057097] usb 6-2: New USB device found, idVendor=0a5c, idProduct=21e6
[    3.057100] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.057102] usb 6-2: Product: BCM20702A0
[    3.057104] usb 6-2: Manufacturer: Broadcom Corp
[    3.057106] usb 6-2: SerialNumber: 2CD05A7F8FF1
[    3.212123] PM: Starting manual resume from disk
[    3.212128] PM: Hibernation image partition 8:18 present
[    3.212129] PM: Looking for hibernation image.
[    3.212288] PM: Image not found (code -22)
[    3.212289] PM: Hibernation image not present or could not be loaded.
[    3.269044] usb 3-5: new high-speed USB device number 4 using ehci-pci
[    3.362613] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    3.417426] usb 3-5: New USB device found, idVendor=17ef, idProduct=100a
[    3.417429] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.417692] hub 3-5:1.0: USB hub found
[    3.417792] hub 3-5:1.0: 6 ports detected
[    3.521649] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.529656] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    3.529829] systemd[1]: Detected architecture x86-64.
[    3.530073] systemd[1]: Set hostname to <universi-hp8460>.
[    3.537047] usb 3-6: new high-speed USB device number 5 using ehci-pci
[    3.694671] usb 3-6: New USB device found, idVendor=17ef, idProduct=480d
[    3.694674] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.694677] usb 3-6: Product: Integrated Camera
[    3.694679] usb 3-6: Manufacturer: Chicony Electronics Co., Ltd.
[    3.729905] systemd[1]: Created slice User and Session Slice.
[    3.730022] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.730133] systemd[1]: Listening on Journal Audit Socket.
[    3.730362] systemd[1]: Created slice System Slice.
[    3.731294] systemd[1]: Mounting Kernel Debug File System...
[    3.732366] systemd[1]: Mounting POSIX Message Queue File System...
[    3.733452] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[    3.755606] EXT4-fs (sda5): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[    3.775990] RPC: Registered named UNIX socket transport module.
[    3.775992] RPC: Registered udp transport module.
[    3.775993] RPC: Registered tcp transport module.
[    3.775994] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.784398] lp: driver loaded but no devices found
[    3.802085] ppdev: user-space parallel port driver
[    4.046287] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input4
[    4.046294] ACPI: Sleep Button [SLPB]
[    4.046539] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input5
[    4.046678] ACPI: Lid Switch [LID]
[    4.046756] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    4.046759] ACPI: Power Button [PWRF]
[    4.054220] ACPI: AC Adapter [AC] (on-line)
[    4.058075] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.060163] acpi device:04: registered as cooling_device2
[    4.060312] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    4.092812] Non-volatile memory driver v1.3
[    4.098443] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    4.098444] thinkpad_acpi: http://ibm-acpi.sf.net/
[    4.098444] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-891-gca74434a8a-dirty, EC 6HHT15WW-3.8
[    4.098445] thinkpad_acpi: Lenovo ThinkPad T400s, model 2815H11
[    4.105329] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    4.105648] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[    4.105661] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    4.105661] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    4.109692] ACPI: Battery Slot [BAT0] (battery present)
[    4.109853] ACPI: Battery Slot [BAT1] (battery absent)
[    4.112859] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.113417] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    4.113788] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    4.115939] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[    4.163046] pci 0000:00:00.0: Intel GM45 Chipset
[    4.163065] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    4.164454] pci 0000:00:00.0: detected 262144K stolen memory
[    4.179618] ath: phy0: Killer Wireless card detected
[    4.193275] [drm] Memory usable by graphics device = 2048M
[    4.193278] checking generic (d0000000 500000) vs hw (d0000000 10000000)
[    4.193279] fb: switching to inteldrmfb from EFI VGA
[    4.193326] Console: switching to colour dummy device 80x25
[    4.195871] snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing.
[    4.196361] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1d/0x0/0x0/0x0/0x0) type:line
[    4.196363] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=1 (0x1f/0x0/0x0/0x0/0x0)
[    4.196365] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[    4.196366] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[    4.196368] snd_hda_codec_conexant hdaudioC0D0:    dig-out=0x20/0x22
[    4.196369] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[    4.196371] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[    4.196372] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1e
[    4.196374] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x1b
[    4.196375] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x1a
[    4.198176] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[    4.200890] ath: phy0: ASPM enabled: 0x43
[    4.200897] ath: EEPROM regdomain: 0x60
[    4.200899] ath: EEPROM indicates we should expect a direct regpair map
[    4.200904] ath: Country alpha2 being used: 00
[    4.200904] ath: Regpair used: 0x60
[    4.201258] [drm] Replacing VGA console driver
[    4.201354] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.201354] [drm] Driver supports precise vblank timestamp query.
[    4.201360] i915 0000:00:02.0: Invalid PCI ROM data signature: expecting 0x52494350, got 0xe935aa55
[    4.201366] [drm] Failed to find VBIOS tables (VBT)
[    4.201629] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.215231] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    4.215515] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    4.215547] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    4.215578] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    4.215607] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    4.215637] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    4.230877] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    4.231331] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffbc4a412c0000, irq=16
[    4.241149] ath: phy1: ASPM enabled: 0x43
[    4.241151] ath: EEPROM regdomain: 0x6c
[    4.241152] ath: EEPROM indicates we should expect a direct regpair map
[    4.241154] ath: Country alpha2 being used: 00
[    4.241155] ath: Regpair used: 0x6c
[    4.242550] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[    4.243004] ieee80211 phy1: Atheros AR9300 Rev:3 mem=0xffffbc4a417a0000, irq=17
[    4.257060] [drm] RC6 disabled, disabling runtime PM support
[    4.258563] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0
[    4.258761] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170119/utaddress-247)
[    4.258767] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.258769] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BE (\GPCM) (20170119/utaddress-247)
[    4.258773] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20170119/utaddress-247)
[    4.258776] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.258777] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BE (\GPCM) (20170119/utaddress-247)
[    4.258780] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20170119/utaddress-247)
[    4.258783] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.258783] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.277772] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.277817] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    4.427070] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[    4.432218] EXT4-fs (sda3): mounted filesystem without journal. Opts: user_xattr
[    4.463574] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    4.465982] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    4.537910] Adding 8389628k swap on /dev/sdb2.  Priority:-1 extents:1 across:8389628k FS
[    4.753282] input: PC Speaker as /devices/platform/pcspkr/input/input15
[    4.809719] intel_powerclamp: No package C-state available
[    4.921267] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: user_xattr
[    4.965364] iTCO_vendor_support: vendor-support=0
[    4.968631] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    4.968684] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0560)
[    4.968825] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.001634] systemd-journald[199]: Received request to flush runtime journal from PID 1
[    5.034986] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    5.141150] fbcon: inteldrmfb (fb0) is primary device
[    5.180692] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: user_xattr
[    5.282988] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: user_xattr
[    5.355859] media: Linux media interface: v0.10
[    5.364367] Linux video capture interface: v2.00
[    5.369625] Bluetooth: Core ver 2.22
[    5.369642] NET: Registered protocol family 31
[    5.369643] Bluetooth: HCI device and connection manager initialized
[    5.369646] Bluetooth: HCI socket layer initialized
[    5.369649] Bluetooth: L2CAP socket layer initialized
[    5.369660] Bluetooth: SCO socket layer initialized
[    5.375463] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480d)
[    5.375877] usbcore: registered new interface driver btusb
[    5.376962] uvcvideo 3-6:1.0: Entity type for entity Extension 3 was not initialized!
[    5.376964] uvcvideo 3-6:1.0: Entity type for entity Processing 2 was not initialized!
[    5.376965] uvcvideo 3-6:1.0: Entity type for entity Camera 1 was not initialized!
[    5.377050] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.7/usb3/3-6/3-6:1.0/input/input16
[    5.377100] usbcore: registered new interface driver uvcvideo
[    5.377101] USB Video Class driver (1.1.1)
[    5.494450] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: user_xattr
[    5.499136] Bluetooth: hci0: BCM: chip id 63
[    5.530112] Bluetooth: hci0: universi-hp8460
[    5.532091] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[    5.532338] bluetooth hci0: firmware: failed to load brcm/BCM20702A1-0a5c-21e6.hcd (-2)
[    5.532340] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[    5.532342] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[    5.559441] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: user_xattr
[    5.614530] random: crng init done
[    5.916589] Console: switching to colour frame buffer device 180x56
[    6.087061] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.087062] Bluetooth: BNEP filters: protocol multicast
[    6.087065] Bluetooth: BNEP socket layer initialized
[    6.207158] thinkpad_ec: loading out-of-tree module taints kernel.
[    6.207524] thinkpad_ec: thinkpad_ec 0.42 loaded.
[    6.208979] hdaps: LENOVO ThinkPad T400s detected, setting orientation 2
[    6.209095] hdaps: initial mode latch is 0x05
[    6.209224] hdaps: setting ec_rate=250, filter_order=2
[    6.209447] hdaps: device successfully initialized.
[    6.209892] input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input17
[    6.210021] input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input18
[    6.210178] hdaps: driver successfully loaded.
[    6.262933] applesmc: supported laptop not found!
[    6.262934] applesmc: driver init failed (ret=-19)!
[    6.343803] wmi: Mapper loaded
[    6.363655] acer_wmi: Acer Laptop ACPI-WMI Extras
[    6.363661] acer_wmi: No or unsupported WMI interface, unable to load
[    6.434910] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.160542] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    8.373670] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    8.382159] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    8.393201] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    8.409562] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    8.413819] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[    8.422845] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[    8.436589] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[    8.733096] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[    8.751311] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.515568] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.578288] wlan0: authenticate with f8:1a:67:5a:c4:74
[   12.588306] wlan0: send auth to f8:1a:67:5a:c4:74 (try 1/3)
[   12.591590] wlan0: authenticated
[   12.597019] wlan0: associate with f8:1a:67:5a:c4:74 (try 1/3)
[   12.600708] wlan0: RX AssocResp from f8:1a:67:5a:c4:74 (capab=0x431 status=0 aid=1)
[   12.600820] wlan0: associated
[   12.600863] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   12.608653] ath: EEPROM regdomain: 0x809c
[   12.608654] ath: EEPROM indicates we should expect a country code
[   12.608656] ath: doing EEPROM country->regdmn map search
[   12.608657] ath: country maps to regdmn code: 0x52
[   12.608658] ath: Country alpha2 being used: CN
[   12.608659] ath: Regpair used: 0x52
[   12.608661] ath: regdomain 0x809c dynamically updated by country IE
[   12.608690] ath: EEPROM regdomain: 0x809c
[   12.608691] ath: EEPROM indicates we should expect a country code
[   12.608692] ath: doing EEPROM country->regdmn map search
[   12.608693] ath: country maps to regdmn code: 0x52
[   12.608694] ath: Country alpha2 being used: CN
[   12.608695] ath: Regpair used: 0x52
[   12.608696] ath: regdomain 0x809c dynamically updated by country IE
[   15.411469] tp_smapi 0.42 loading...
[   15.411476] SMAPI not supported (ID=0x7f)
[   15.411480] tp_smapi init failed (ret=-6)!
[   15.487111] tp_smapi 0.42 loading...
[   15.487120] SMAPI not supported (ID=0x7f)
[   15.487124] tp_smapi init failed (ret=-6)!
[   17.516365] Bluetooth: RFCOMM TTY layer initialized
[   17.516372] Bluetooth: RFCOMM socket layer initialized
[   17.516378] Bluetooth: RFCOMM ver 1.11