[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt 
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.1-300-g5cac25e-dirty 08/18/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000180000000 aka 6144M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
[    0.000000]  [mem 0x17fe00000-0x17fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
[    0.000000]  [mem 0x17c000000-0x17fdfffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
[    0.000000]  [mem 0x100000000-0x17bffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbff9afff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000BFFB4240 000040
[    0.000000] ACPI: SSDT 0x00000000BFFB69D0 000E57 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0x00000000BFFB7830 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000BFFB7870 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFB7940 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFB7AB8 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000BFFB7AF0 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFB7B30 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFB7CA8 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
[    0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13fffb000-0x13fffffff]
[    0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
[    0.000000]   NODE_DATA [mem 0x17fff9000-0x17fffdfff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
[    0.000000]  [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x17fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbff9afff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000]   node   1: [mem 0x140000000-0x17fffffff]
[    0.000000] On node 0 totalpages: 1048377
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10695 pages used for memmap
[    0.000000]   DMA32 zone: 782235 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
[    0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292581
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xe5ea000000-0xe5ebffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[    0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.889 MHz processor
[    0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.77 BogoMIPS (lpj=7639556)
[    0.010954] pid_max: default: 32768 minimum: 301
[    0.015676] ACPI: Core revision 20140424
[    0.022087] ACPI: All ACPI Tables successfully acquired
[    0.027609] Security Framework initialized
[    0.031789] AppArmor: AppArmor disabled by boot time parameter
[    0.037699] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.045515] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058822] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.068672] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.075662] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.083624] Initializing cgroup subsys memory
[    0.088088] Initializing cgroup subsys devices
[    0.092631] Initializing cgroup subsys freezer
[    0.097156] Initializing cgroup subsys net_cls
[    0.101701] Initializing cgroup subsys blkio
[    0.106055] Initializing cgroup subsys perf_event
[    0.110853] Initializing cgroup subsys net_prio
[    0.115518] tseg: 0000000000
[    0.115532] CPU: Physical Processor ID: 0
[    0.119653] CPU: Processor Core ID: 0
[    0.124464] mce: CPU supports 6 MCE banks
[    0.128606] LVT offset 0 assigned for vector 0xf9
[    0.133400] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.148880] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.158014] ftrace: allocating 21601 entries in 85 pages
[    0.173461] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.219105] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.336302] Performance Events: AMD PMU driver.
[    0.341028] ... version:                0
[    0.345120] ... bit width:              48
[    0.349305] ... generic registers:      4
[    0.353393] ... value mask:             0000ffffffffffff
[    0.358804] ... max period:             00007fffffffffff
[    0.364200] ... fixed-purpose events:   0
[    0.368304] ... event mask:             000000000000000f
[    0.376330] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.384662] x86: Booting SMP configuration:
[    0.388930] .... node  #0, CPUs:      #1 #2 #3
[    0.433521] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.585089] x86: Booted up 2 nodes, 8 CPUs
[    0.589519] smpboot: Total of 8 processors activated (30558.31 BogoMIPS)
[    0.602122] devtmpfs: initialized
[    0.614124] pinctrl core: initialized pinctrl subsystem
[    0.619601] NET: Registered protocol family 16
[    0.624342] cpuidle: using governor ladder
[    0.628522] cpuidle: using governor menu
[    0.632528] node 0 link 1: io port [1000, 3fff]
[    0.632531] TOM: 00000000c0000000 aka 3072M
[    0.636795] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
[    0.636799] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.636803] node 0 link 1: mmio [f8000000, fbffffff]
[    0.636805] TOM2: 0000000180000000 aka 6144M
[    0.641152] bus: [bus 00-05] on node 0 link 1
[    0.641154] bus: 00 [io  0x0000-0xffff]
[    0.641156] bus: 00 [mem 0xd0000000-0xffffffff]
[    0.641158] bus: 00 [mem 0x180000000-0xfcffffffff]
[    0.641264] ACPI: bus type PCI registered
[    0.645348] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.652017] PCI: Using configuration type 1 for base access
[    0.657658] PCI: Using configuration type 1 for extended access
[    0.664279] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.670637] mtrr: probably your BIOS does not setup all CPUs.
[    0.676467] mtrr: corrected configuration.
[    0.693203] ACPI: Added _OSI(Module Device)
[    0.697504] ACPI: Added _OSI(Processor Device)
[    0.702023] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.706796] ACPI: Added _OSI(Processor Aggregator Device)
[    0.715868] ACPI: Interpreter enabled
[    0.719613] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.729054] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.738501] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.747956] ACPI: (supports S0 S1 S5)
[    0.751710] ACPI: Using IOAPIC for interrupt routing
[    0.756791] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.784812] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.791071] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.799387] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.837739] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.847863] PCI host bridge to bus 0000:00
[    0.852062] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.857640] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.863909] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.870881] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.877831] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.884805] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.891094] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.891279] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.891286] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.891416] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.891425] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.891448] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.891453] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.891512] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.891609] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.891620] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.891656] pci 0000:00:02.0: supports D1 D2
[    0.891665] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.891731] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.897544] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.897559] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.897600] pci 0000:00:02.1: supports D1 D2
[    0.897602] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.897657] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.903463] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.903490] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.903518] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.910738] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.917361] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.924582] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.931297] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.931305] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.931312] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.931317] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.931322] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.931326] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.931331] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.931477] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.931487] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.931491] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.931496] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.931500] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.931505] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.931510] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.931645] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.931740] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.937527] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.937576] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.937625] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.943433] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.943488] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.943538] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.949336] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.949375] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.949432] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.955245] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.955286] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.955348] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.961154] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.961287] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.961395] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.961503] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.961646] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.961753] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.961875] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.962051] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.962182] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.962324] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.962503] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.962529] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.962546] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.962563] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.962598] pci 0000:01:04.0: supports D1 D2
[    0.962715] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.967776] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.967779] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.967782] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.967899] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.967932] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.967969] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
[    0.968048] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.968125] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.978259] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.983314] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.983407] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.983441] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.983543] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.983644] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.993776] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.998831] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.998905] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.004031] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.009104] pci_bus 0000:00: on NUMA node 0
[    1.009211] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    1.015625] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    1.022046] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.029707] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.037358] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.044994] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.052664] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.059102] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.065518] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.073159] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.080797] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.088450] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.094888] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.101312] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.108946] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.116650] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.124314] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.133434] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.140150] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.146870] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.153588] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.160568] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.165828] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.171608] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.179811] vgaarb: loaded
[    1.182613] vgaarb: bridge control possible 0000:01:04.0
[    1.188192] PCI: Using ACPI for IRQ routing
[    1.192477] PCI: pci_cache_line_size set to 64 bytes
[    1.192535] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.192538] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
[    1.192850] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.199983] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.205255] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.214013] Switched to clocksource hpet
[    1.229561] pnp: PnP ACPI init
[    1.232785] ACPI: bus type PNP registered
[    1.237414] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.237494] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.237592] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.237669] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.237711] pnp 00:04: [dma 2]
[    1.237752] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.237774] pnp: PnP ACPI: found 5 devices
[    1.241984] ACPI: bus type PNP unregistered
[    1.254095] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
[    1.264161] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.269209] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.275389] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.282268] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.289614] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.296961] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.302005] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.308880] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.313923] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.320800] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.325840] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.330892] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.330895] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    1.330898] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
[    1.330900] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
[    1.330903] pci_bus 0000:00: resource 8 [io  0x0000-0x0cf7]
[    1.330906] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.330909] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.330911] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.330914] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.330917] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.331046] NET: Registered protocol family 2
[    1.336036] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.343830] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.351244] TCP: Hash tables configured (established 65536 bind 65536)
[    1.357935] TCP: reno registered
[    1.361252] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.367525] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.374386] NET: Registered protocol family 1
[    1.379216] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.385383] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.391399] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.397009] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.402603] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.408285] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.413903] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.419488] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.425149] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.430759] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.436337] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.441998] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.447596] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.453187] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.458839] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.464427] pci 0000:01:04.0: Video device with shadowed ROM
[    1.464435] PCI: CLS 64 bytes, default 64
[    1.464542] Unpacking initramfs...
[    1.697641] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.705630] PCI-DMA: Disabling AGP.
[    1.710824] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    1.716495] PCI-DMA: using GART IOMMU.
[    1.720320] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.732425] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.740774] microcode: CPU0: patch_level=0x01000096
[    1.745779] microcode: CPU1: patch_level=0x01000096
[    1.750794] microcode: CPU2: patch_level=0x01000096
[    1.755806] microcode: CPU3: patch_level=0x01000096
[    1.760820] microcode: CPU4: patch_level=0x01000096
[    1.765813] microcode: CPU5: patch_level=0x01000096
[    1.771917] microcode: CPU6: patch_level=0x01000096
[    1.776902] microcode: CPU7: patch_level=0x01000096
[    1.781974] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.790919] LVT offset 1 assigned for vector 0x400
[    1.795827] IBS: LVT offset 1 assigned
[    1.799701] perf: AMD IBS detected (0x00000007)
[    1.804940] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.811437] audit: initializing netlink subsys (disabled)
[    1.816950] audit: type=2000 audit(1439937235.632:1): initialized
[    1.823905] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.830419] zbud: loaded
[    1.833401] VFS: Disk quotas dquot_6.5.2
[    1.837461] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.844106] msgmni has been set to 9945
[    1.848564] alg: No test for stdrng (krng)
[    1.852855] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.860494] io scheduler noop registered
[    1.864512] io scheduler deadline registered
[    1.868957] io scheduler cfq registered (default)
[    1.873967] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.874093] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.874205] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.874317] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.874471] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.874499] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.874525] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.874550] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.874570] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.881673] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.888291] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.888301] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.895349] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.901951] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.901962] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.909003] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.909014] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.916064] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.916093] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.921793] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.928615] GHES: HEST is not enabled!
[    1.932582] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.959354] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.987136] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.995182] Linux agpgart interface v0.103
[    1.999589] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.010283] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.015410] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.020744] mousedev: PS/2 mouse device common for all mice
[    2.026549] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.031748] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.038228] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.046210] ledtrig-cpu: registered to indicate activity on CPUs
[    2.052508] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.059048] AMD IOMMUv2 functionality not available on this system
[    2.065455] TCP: cubic registered
[    2.068995] NET: Registered protocol family 10
[    2.073936] mip6: Mobile IPv6
[    2.077003] NET: Registered protocol family 17
[    2.081589] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.090337] mpls_gso: MPLS GSO support
[    2.095075] registered taskstats version 1
[    2.100038] rtc_cmos rtc_cmos: setting system clock to 2015-08-18 22:33:57 UTC (1439937237)
[    2.108626] PM: Hibernation image not present or could not be loaded.
[    2.110455] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.118481] Write protecting the kernel read-only data: 8192k
[    2.127798] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.136551] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.160536] systemd-udevd[99]: starting version 215
[    2.166387] random: systemd-udevd urandom read with 4 bits of entropy available
[    2.197546] pps_core: LinuxPPS API ver. 1 registered
[    2.202615] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.212259] ACPI: bus type USB registered
[    2.216578] usbcore: registered new interface driver usbfs
[    2.216627] PTP clock support registered
[    2.226285] usbcore: registered new interface driver hub
[    2.231954] usbcore: registered new device driver usb
[    2.232039] tg3.c:v3.137 (May 11, 2014)
[    2.232051] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.232258] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.253547] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.260783] ehci-pci: EHCI PCI platform driver
[    2.265668] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.265687] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.265705] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.265725] ehci-pci 0000:00:02.1: debug port 1
[    2.265773] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.265803] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.277700] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.277787] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.277789] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.277790] usb usb1: Product: EHCI Host Controller
[    2.277792] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.277793] usb usb1: SerialNumber: 0000:00:02.1
[    2.278014] hub 1-0:1.0: USB hub found
[    2.278023] hub 1-0:1.0: 10 ports detected
[    2.339584] ohci-pci: OHCI PCI platform driver
[    2.344413] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.350131] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.357253] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.357255] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.357257] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.357260] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.357401] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.357569] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.404119] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.449987] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.460432] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.467662] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.467664] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.467666] usb usb2: Product: OHCI PCI host controller
[    2.467667] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.467668] usb usb2: SerialNumber: 0000:00:02.0
[    2.467849] hub 2-0:1.0: USB hub found
[    2.467860] hub 2-0:1.0: 10 ports detected
[    2.508601] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.516586] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.529898] FS-Cache: Loaded
[    2.537098] RPC: Registered named UNIX socket transport module.
[    2.543772] RPC: Registered udp transport module.
[    2.549854] RPC: Registered tcp transport module.
[    2.555938] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.568458] FS-Cache: Netfs 'nfs' registered for caching
[    2.584539] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.629646] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.729511] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[    3.733255] Switched to clocksource tsc
[    4.243700] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.250364] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.257328] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.171625] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    9.185477] systemd[1]: Detected architecture 'x86-64'.
[   10.985625] random: nonblocking pool is initialized
[   11.223672] systemd[1]: Inserted module 'autofs4'
[   11.232844] systemd[1]: Set hostname to <cb-test-tgt>.
[   14.367395] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[   14.380288] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[   14.395846] systemd[1]: Expecting device dev-ttyS0.device...
[   14.409614] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[   14.417571] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   14.425296] systemd[1]: Starting Remote File Systems (Pre).
[   14.441480] systemd[1]: Reached target Remote File Systems (Pre).
[   14.447720] systemd[1]: Starting Encrypted Volumes.
[   14.461473] systemd[1]: Reached target Encrypted Volumes.
[   14.467005] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[   14.475191] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   14.483256] systemd[1]: Starting Paths.
[   14.497560] systemd[1]: Reached target Paths.
[   14.502160] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[   14.525476] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   14.535072] systemd[1]: Starting Swap.
[   14.549462] systemd[1]: Reached target Swap.
[   14.553876] systemd[1]: Starting Root Slice.
[   14.565467] systemd[1]: Created slice Root Slice.
[   14.570306] systemd[1]: Starting User and Session Slice.
[   14.585446] systemd[1]: Created slice User and Session Slice.
[   14.591321] systemd[1]: Starting Delayed Shutdown Socket.
[   14.605435] systemd[1]: Listening on Delayed Shutdown Socket.
[   14.611335] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[   14.633434] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   14.640538] systemd[1]: Starting Journal Socket (/dev/log).
[   14.657412] systemd[1]: Listening on Journal Socket (/dev/log).
[   14.663487] systemd[1]: Starting udev Kernel Socket.
[   14.681409] systemd[1]: Listening on udev Kernel Socket.
[   14.686880] systemd[1]: Starting udev Control Socket.
[   14.701402] systemd[1]: Listening on udev Control Socket.
[   14.706963] systemd[1]: Starting Journal Socket.
[   14.721382] systemd[1]: Listening on Journal Socket.
[   14.726474] systemd[1]: Starting System Slice.
[   14.741382] systemd[1]: Created slice System Slice.
[   14.746448] systemd[1]: Starting system-getty.slice.
[   14.761389] systemd[1]: Created slice system-getty.slice.
[   14.766911] systemd[1]: Starting system-serial\x2dgetty.slice.
[   14.781453] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   14.787946] systemd[1]: Starting Increase datagram queue length...
[   14.806230] systemd[1]: Mounting Debug File System...
[   14.822169] systemd[1]: Mounting POSIX Message Queue File System...
[   15.044937] systemd[1]: Starting Load Kernel Modules...
[   16.762162] systemd[1]: Started Set Up Additional Binary Formats.
[   16.928516] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   16.953640] systemd[1]: Starting udev Coldplug all Devices...
[   16.969599] systemd[1]: Mounting Huge Pages File System...
[   16.985474] systemd[1]: Starting Slices.
[   16.996607] systemd[1]: Reached target Slices.
[   17.001213] systemd[1]: Starting Remount Root and Kernel File Systems...
[   17.028654] systemd[1]: Mounted POSIX Message Queue File System.
[   17.044583] systemd[1]: Mounted Debug File System.
[   17.060633] systemd[1]: Started Increase datagram queue length.
[   17.069905] systemd[1]: Starting Syslog Socket.
[   17.084620] systemd[1]: Listening on Syslog Socket.
[   17.089713] systemd[1]: Starting Sockets.
[   17.104623] systemd[1]: Reached target Sockets.
[   17.109388] systemd[1]: Starting Journal Service...
[   17.132609] systemd[1]: Started Journal Service.
[   19.580621] systemd-udevd[190]: starting version 215
[   19.613792] systemd-journald[174]: Received request to flush runtime journal from PID 1
[   25.567248] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[   25.575160] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[   25.623944] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[   25.632506] ACPI: Power Button [PWRB]
[   25.636339] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   25.643844] ACPI: Power Button [PWRF]
[   25.655513] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   25.703176] EDAC MC: Ver: 3.0.0
[   26.334176] MCE: In-kernel MCE decoding enabled.
[   26.483151] SCSI subsystem initialized
[   26.543563] AMD64 EDAC driver v3.4.0
[   26.547357] EDAC amd64: DRAM ECC enabled.
[   26.551473] EDAC amd64: F10h detected (node 0).
[   26.556114] EDAC MC: DCT0 chip selects:
[   26.556116] EDAC amd64: MC: 0:     0MB 1:     0MB
[   26.560912] EDAC amd64: MC: 2:     0MB 3:     0MB
[   26.565706] EDAC amd64: MC: 4:     0MB 5:     0MB
[   26.570504] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   26.575303] EDAC MC: DCT1 chip selects:
[   26.575304] EDAC amd64: MC: 0:     0MB 1:     0MB
[   26.580102] EDAC amd64: MC: 2:     0MB 3:     0MB
[   26.584891] EDAC amd64: MC: 4:     0MB 5:     0MB
[   26.589683] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   26.594473] EDAC amd64: using x4 syndromes.
[   26.598743] EDAC amd64: MCT channel count: 2
[   26.603132] EDAC amd64: CS6: Registered DDR2 RAM
[   26.607818] EDAC amd64: CS7: Registered DDR2 RAM
[   26.612967] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[   26.622865] EDAC amd64: DRAM ECC enabled.
[   26.627048] EDAC amd64: F10h detected (node 1).
[   26.631764] EDAC MC: DCT0 chip selects:
[   26.631767] EDAC amd64: MC: 0:  1024MB 1:     0MB
[   26.633366] FDC 0 is a post-1991 82077
[   26.640412] EDAC amd64: MC: 2:     0MB 3:     0MB
[   26.645257] EDAC amd64: MC: 4:     0MB 5:     0MB
[   26.650076] EDAC amd64: MC: 6:     0MB 7:     0MB
[   26.654846] EDAC MC: DCT1 chip selects:
[   26.654849] EDAC amd64: MC: 0:     0MB 1:     0MB
[   26.659649] EDAC amd64: MC: 2:     0MB 3:     0MB
[   26.664448] EDAC amd64: MC: 4:     0MB 5:     0MB
[   26.669228] EDAC amd64: MC: 6:     0MB 7:     0MB
[   26.674027] EDAC amd64: using x4 syndromes.
[   26.678326] EDAC amd64: MCT channel count: 1
[   26.682738] EDAC amd64: CS0: Registered DDR2 RAM
[   26.687629] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[   26.697522] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   26.716960] acpi-cpufreq: overriding BIOS provided _PSD data
[   26.885664] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   27.017055] libata version 3.00 loaded.
[   27.173634] sata_nv 0000:00:07.0: version 3.5
[   27.174013] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[   27.180715] scsi0 : sata_nv
[   27.183962] scsi1 : sata_nv
[   27.186967] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[   27.194237] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[   27.201829] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[   27.208331] scsi2 : sata_nv
[   27.211480] scsi3 : sata_nv
[   27.214477] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[   27.221735] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[   27.395872] pata_amd 0000:00:06.0: version 0.4.1
[   27.396774] scsi4 : pata_amd
[   27.400117] scsi5 : pata_amd
[   27.403194] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[   27.410286] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[   27.520941] ata1: SATA link down (SStatus 0 SControl 300)
[   27.540936] ata3: SATA link down (SStatus 0 SControl 300)
[   27.611510] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[   27.616895] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[   27.829909] kvm: Nested Virtualization enabled
[   27.834652] kvm: Nested Paging enabled
[   27.838531] ata2: SATA link down (SStatus 0 SControl 300)
[   28.152720] ata4: SATA link down (SStatus 0 SControl 300)
[   64.932404] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
[  301.025089] [Hardware Error]: Corrected error, no action required.
[  301.031404] [Hardware Error]: CPU:4 (10:2:1) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc224100da080a13
[  301.041045] [Hardware Error]: MC4_ADDR: 0x00000000bd7a3580
[  301.046606] [Hardware Error]: MC4 Error (node 1): DRAM ECC error detected on the NB.
[  301.054522] EDAC MC1: 1 CE Failed to map error addr to a csrow on mc#1csrow#0channel#0 (channel:0 page:0xbd7a3 offset:0x580 grain:0 syndrome:0xda44)
[  301.067906] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)
[  322.253519] nfs: server 10.100.1.1 not responding, still trying
[  324.273235] nfs: server 10.100.1.1 OK