[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7c53fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c7c54000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 0.7 present.
[    0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.4-320-gbbac5ac 05/26/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF8000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000021f000000 aka 8688M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f4e70-0x000f4e7f] mapped at [c00f4e70]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
[    0.000000]  [mem 0x37200000-0x373fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
[    0.000000]  [mem 0x34000000-0x371fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
[    0.000000]  [mem 0x37400000-0x375fdfff] page 4k
[    0.000000] BRK [0x0179d000, 0x0179dfff] PGTABLE
[    0.000000] BRK [0x0179e000, 0x0179ffff] PGTABLE
[    0.000000] BRK [0x017a0000, 0x017a0fff] PGTABLE
[    0.000000] BRK [0x017a1000, 0x017a1fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3602e000-0x3700efff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F5070 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000C7C670E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000C7C69740 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000C7C67280 0024B6 (v02 ASROCK COREBOOT 00010001 INTL 20140926)
[    0.000000] ACPI: FACS 0x00000000C7C67240 000040
[    0.000000] ACPI: FACS 0x00000000C7C67240 000040
[    0.000000] ACPI: SSDT 0x00000000C7C69840 000046 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0x00000000C7C69890 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000C7C698D0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HEST 0x00000000C7C69930 000028 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 0x00000000C7C69960 00168E (v02 AMD    ALIB     00000001 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000C7C6AFF0 0003DE (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: HPET 0x00000000C7C6B3D0 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 7802MB HIGHMEM available.
[    0.000000] 885MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 375fe000
[    0.000000]   low ram: 0 - 375fe000
[    0.000000] BRK [0x017a2000, 0x017a2fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x375fdfff]
[    0.000000]   HighMem  [mem 0x375fe000-0x1effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xc7c53fff]
[    0.000000]   node   0: [mem 0x00000000-0x1effffff]
[    0.000000] On node 0 totalpages: 1993714
[    0.000000] free_area_init_node: node 0, pgdat c165d200, node_mem_map f1c4e020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1740 pages used for memmap
[    0.000000]   Normal zone: 222718 pages, LIFO batch:31
[    0.000000]   HighMem zone: 15605 pages used for memmap
[    0.000000]   HighMem zone: 1766998 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f75d0000 s34752 r0 d22592 u57344
[    0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1991942
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-686-pae root=UUID=0198e82a-32df-4f18-bec0-3e08802b084d ro quiet noisapnp pcie_aspm=force pcie_aspm.policy=powersave nmi_watchdog=0
[    0.000000] PCIe ASPM is forcibly enabled
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000375fe:0021f000)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 7880228K/7974856K available (4610K kernel code, 522K rwdata, 1452K rodata, 660K init, 460K bss, 94628K reserved, 7067992K highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
    vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
      .init : 0xc1671000 - 0xc1716000   ( 660 kB)
      .data : 0xc1480b8c - 0xc166fbc0   (1980 kB)
      .text : 0xc1000000 - 0xc1480b8c   (4610 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f1806000 soft=f1808000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1599.988 MHz processor
[    0.000054] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.97 BogoMIPS (lpj=6399952)
[    0.000060] pid_max: default: 32768 minimum: 301
[    0.000078] ACPI: Core revision 20140424
[    0.006227] ACPI: All ACPI Tables successfully acquired
[    0.006276] Security Framework initialized
[    0.006297] AppArmor: AppArmor disabled by boot time parameter
[    0.006301] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.006337] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.006342] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.006754] Initializing cgroup subsys memory
[    0.006766] Initializing cgroup subsys devices
[    0.006781] Initializing cgroup subsys freezer
[    0.006788] Initializing cgroup subsys net_cls
[    0.006800] Initializing cgroup subsys blkio
[    0.006808] Initializing cgroup subsys perf_event
[    0.006813] Initializing cgroup subsys net_prio
[    0.006857] CPU: Physical Processor ID: 0
[    0.006860] CPU: Processor Core ID: 0
[    0.006865] mce: CPU supports 6 MCE banks
[    0.006886] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
[    0.007219] Freeing SMP alternatives memory: 20K (c1716000 - c171b000)
[    0.009404] ftrace: allocating 20814 entries in 41 pages
[    0.029119] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.029552] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.069244] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
[    0.176552] Performance Events: AMD PMU driver.
[    0.176562] ... version:                0
[    0.176565] ... bit width:              48
[    0.176567] ... generic registers:      4
[    0.176570] ... value mask:             0000ffffffffffff
[    0.176573] ... max period:             00007fffffffffff
[    0.176576] ... fixed-purpose events:   0
[    0.176578] ... event mask:             000000000000000f
[    0.179895] CPU 1 irqstacks, hard=f193e000 soft=f1940000
[    0.179904] x86: Booting SMP configuration:
[    0.179908] .... node  #0, CPUs:      #1
[    0.189949] Initializing CPU#1
[    0.193119] x86: Booted up 1 node, 2 CPUs
[    0.193126] smpboot: Total of 2 processors activated (6399.95 BogoMIPS)
[    0.193924] devtmpfs: initialized
[    0.196744] pinctrl core: initialized pinctrl subsystem
[    0.196920] NET: Registered protocol family 16
[    0.197144] cpuidle: using governor ladder
[    0.197150] cpuidle: using governor menu
[    0.197418] ACPI: bus type PCI registered
[    0.197423] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.197740] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.197745] bios32_service(0x49435024): not present
[    0.197747] PCI: Using configuration type 1 for base access
[    0.197750] PCI: Using configuration type 1 for extended access
[    0.210940] ACPI: Added _OSI(Module Device)
[    0.210948] ACPI: Added _OSI(Processor Device)
[    0.210952] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.210955] ACPI: Added _OSI(Processor Aggregator Device)
[    0.213214] ACPI: Executed 2 blocks of module-level executable AML code
[    0.217590] ACPI: Interpreter enabled
[    0.217612] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.217639] ACPI: (supports S0 S1 S3 S4 S5)
[    0.217643] ACPI: Using IOAPIC for interrupt routing
[    0.217674] HEST: Table parsing has been initialized.
[    0.217683] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.233603] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.233619] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.233760] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.234307] PCI host bridge to bus 0000:00
[    0.234313] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.234319] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.234323] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.234331] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.234336] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[    0.234353] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[    0.234543] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[    0.234563] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.234574] pci 0000:00:01.0: reg 0x14: [io  0x2000-0x20ff]
[    0.234585] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff]
[    0.234652] pci 0000:00:01.0: supports D1 D2
[    0.234736] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.234828] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[    0.234845] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff]
[    0.234923] pci 0000:00:01.1: supports D1 D2
[    0.235006] pci 0000:00:01.1: System wakeup disabled by ACPI
[    0.235183] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.235211] pci 0000:00:11.0: reg 0x10: [io  0x2410-0x2417]
[    0.235226] pci 0000:00:11.0: reg 0x14: [io  0x2420-0x2423]
[    0.235240] pci 0000:00:11.0: reg 0x18: [io  0x2418-0x241f]
[    0.235255] pci 0000:00:11.0: reg 0x1c: [io  0x2424-0x2427]
[    0.235269] pci 0000:00:11.0: reg 0x20: [io  0x2400-0x240f]
[    0.235284] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff]
[    0.235557] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.235578] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff]
[    0.235729] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.235890] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.235918] pci 0000:00:12.2: reg 0x10: [mem 0xf014c000-0xf014c0ff]
[    0.236029] pci 0000:00:12.2: supports D1 D2
[    0.236033] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.236119] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.236215] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.236235] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff]
[    0.236385] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.236549] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.236577] pci 0000:00:13.2: reg 0x10: [mem 0xf014d000-0xf014d0ff]
[    0.236688] pci 0000:00:13.2: supports D1 D2
[    0.236692] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.236778] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.236941] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.237204] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.237236] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit]
[    0.237326] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.237556] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.237854] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.237979] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.238130] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.238151] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff]
[    0.238303] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.238461] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    0.238568] pci 0000:00:15.0: supports D1 D2
[    0.238660] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.238820] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[    0.238934] pci 0000:00:15.1: supports D1 D2
[    0.239025] pci 0000:00:15.1: System wakeup disabled by ACPI
[    0.239164] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[    0.239333] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[    0.239498] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[    0.239667] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[    0.239850] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[    0.240015] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[    0.240178] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[    0.240347] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[    0.240781] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[    0.240796] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.240801] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.240805] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.240810] pci 0000:00:14.4:   bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[    0.240912] pci 0000:00:15.0: PCI bridge to [bus 02]
[    0.241131] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.241160] pci 0000:03:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.241206] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.241232] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.241361] pci 0000:03:00.0: supports D1 D2
[    0.241365] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.249483] pci 0000:00:15.1: PCI bridge to [bus 03]
[    0.249502] pci 0000:00:15.1:   bridge window [io  0x1000-0x1fff]
[    0.249517] pci 0000:00:15.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.249550] pci_bus 0000:00: on NUMA node 0
[    0.250504] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.250750] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.250924] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.251096] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.251255] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.251427] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
[    0.251594] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.251769] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.252106] ACPI: Enabled 6 GPEs in block 00 to 1F
[    0.252585] vgaarb: setting as boot device: PCI:0000:00:01.0
[    0.252595] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.252607] vgaarb: loaded
[    0.252610] vgaarb: bridge control possible 0000:00:01.0
[    0.252760] PCI: Using ACPI for IRQ routing
[    0.252765] PCI: pci_cache_line_size set to 64 bytes
[    0.252919] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.252924] e820: reserve RAM buffer [mem 0xc7c54000-0xc7ffffff]
[    0.252928] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[    0.253332] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.253341] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.255498] Switched to clocksource hpet
[    0.266067] pnp: PnP ACPI init
[    0.266098] ACPI: bus type PNP registered
[    0.266495] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.266788] pnp: PnP ACPI: found 1 devices
[    0.266792] ACPI: bus type PNP unregistered
[    0.266798] PnPBIOS: Disabled by ACPI PNP
[    0.311037] pci 0000:00:14.4: PCI bridge to [bus 01]
[    0.311064] pci 0000:00:15.0: PCI bridge to [bus 02]
[    0.311082] pci 0000:00:15.1: PCI bridge to [bus 03]
[    0.311088] pci 0000:00:15.1:   bridge window [io  0x1000-0x1fff]
[    0.311101] pci 0000:00:15.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.311112] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.311117] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.311122] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.311126] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[    0.311131] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.311135] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.311139] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.311143] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff]
[    0.311148] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.311152] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.311295] NET: Registered protocol family 2
[    0.311961] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.311992] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.312030] TCP: Hash tables configured (established 8192 bind 8192)
[    0.312078] TCP: reno registered
[    0.312084] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.312096] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.312234] NET: Registered protocol family 1
[    0.312270] pci 0000:00:01.0: Video device with shadowed ROM
[    0.369828] PCI: CLS 64 bytes, default 64
[    0.369958] Unpacking initramfs...
[    1.006511] Freeing initrd memory: 16260K (f602e000 - f700f000)
[    1.007076] microcode: CPU0: patch_level=0x05000119
[    1.007200] microcode: CPU1: patch_level=0x05000119
[    1.007580] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.007603] LVT offset 0 assigned for vector 0x400
[    1.007663] perf: AMD IBS detected (0x000000ff)
[    1.008409] futex hash table entries: 512 (order: 3, 32768 bytes)
[    1.008533] audit: initializing netlink subsys (disabled)
[    1.008577] audit: type=2000 audit(1464540719.896:1): initialized
[    1.009580] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.009621] zbud: loaded
[    1.009956] VFS: Disk quotas dquot_6.5.2
[    1.009986] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.010165] msgmni has been set to 1618
[    1.011389] alg: No test for stdrng (krng)
[    1.011454] bounce: pool size: 64 pages
[    1.011596] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.011769] io scheduler noop registered
[    1.011781] io scheduler deadline registered
[    1.011869] io scheduler cfq registered (default)
[    1.012466] pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
[    1.012900] pcieport 0000:00:15.1: irq 41 for MSI/MSI-X
[    1.013151] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[    1.013160] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[    1.013195] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[    1.013199] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.013207] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[    1.013242] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.013281] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.013396] GHES: Failed to enable APEI firmware first mode.
[    1.013408] isapnp: ISA Plug & Play support disabled
[    1.013777] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.034488] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.036375] Linux agpgart interface v0.103
[    1.036767] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.040459] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.040479] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.041333] mousedev: PS/2 mouse device common for all mice
[    1.041549] rtc_cmos 00:00: RTC can wake from S4
[    1.041958] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    1.042074] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[    1.042116] ledtrig-cpu: registered to indicate activity on CPUs
[    1.042445] TCP: cubic registered
[    1.042609] NET: Registered protocol family 10
[    1.043255] mip6: Mobile IPv6
[    1.043263] NET: Registered protocol family 17
[    1.043275] mpls_gso: MPLS GSO support
[    1.043751] Using IPI No-Shortcut mode
[    1.044060] registered taskstats version 1
[    1.044887] rtc_cmos 00:00: setting system clock to 2016-05-29 16:52:00 UTC (1464540720)
[    1.044998] PM: Hibernation image not present or could not be loaded.
[    1.045567] Freeing unused kernel memory: 660K (c1671000 - c1716000)
[    1.045716] Write protecting the kernel text: 4612k
[    1.045858] Write protecting the kernel read-only data: 1456k
[    1.045861] NX-protecting the kernel data: 3580k
[    1.138313] systemd-udevd[62]: starting version 215
[    1.139130] random: systemd-udevd urandom read with 0 bits of entropy available
[    1.158897] ACPI: bus type USB registered
[    1.158964] usbcore: registered new interface driver usbfs
[    1.158990] usbcore: registered new interface driver hub
[    1.163730] usbcore: registered new device driver usb
[    1.164710] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.165386] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.165811] ehci-pci: EHCI PCI platform driver
[    1.166222] QUIRK: Enable AMD PLL fix
[    1.166265] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.166283] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.166296] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.166381] ehci-pci 0000:00:12.2: debug port 1
[    1.166454] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014c000
[    1.167492] SCSI subsystem initialized
[    1.174730] libata version 3.00 loaded.
[    1.176745] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.177030] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.177036] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.177040] usb usb1: Product: EHCI Host Controller
[    1.177045] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[    1.177049] usb usb1: SerialNumber: 0000:00:12.2
[    1.177346] hub 1-0:1.0: USB hub found
[    1.177365] hub 1-0:1.0: 5 ports detected
[    1.178213] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.178228] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.178237] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.178254] ehci-pci 0000:00:13.2: debug port 1
[    1.178310] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014d000
[    1.179379] thermal LNXTHERM:00: registered as thermal_zone0
[    1.179388] ACPI: Thermal Zone [TZ00] (44 C)
[    1.187528] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.187660] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.187666] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.187671] usb usb2: Product: EHCI Host Controller
[    1.187675] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[    1.187679] usb usb2: SerialNumber: 0000:00:13.2
[    1.187970] hub 2-0:1.0: USB hub found
[    1.188017] hub 2-0:1.0: 5 ports detected
[    1.188548] ahci 0000:00:11.0: version 3.0
[    1.189066] ohci-pci: OHCI PCI platform driver
[    1.189203] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.189211] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part 
[    1.192167] scsi0 : ahci
[    1.193251] scsi1 : ahci
[    1.195368] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.195950] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[    1.196378] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xf7e2c000, bc:5f:f4:c8:d3:98, XID 0c200000 IRQ 42
[    1.196384] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.201927] scsi2 : ahci
[    1.206569] scsi3 : ahci
[    1.208722] scsi4 : ahci
[    1.216242] scsi5 : ahci
[    1.216405] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19
[    1.216411] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19
[    1.216417] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19
[    1.216422] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19
[    1.216427] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19
[    1.216431] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19
[    1.217184] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.217201] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.217269] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000
[    1.276021] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.276031] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.276035] usb usb3: Product: OHCI PCI host controller
[    1.276040] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
[    1.276043] usb usb3: SerialNumber: 0000:00:12.0
[    1.276639] hub 3-0:1.0: USB hub found
[    1.276663] hub 3-0:1.0: 5 ports detected
[    1.277338] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.277352] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[    1.277400] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000
[    1.335957] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.335967] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.335972] usb usb4: Product: OHCI PCI host controller
[    1.335976] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
[    1.335980] usb usb4: SerialNumber: 0000:00:13.0
[    1.336591] hub 4-0:1.0: USB hub found
[    1.336615] hub 4-0:1.0: 5 ports detected
[    1.337252] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.337265] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[    1.337317] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000
[    1.395945] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.395955] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.395960] usb usb5: Product: OHCI PCI host controller
[    1.395964] usb usb5: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
[    1.395968] usb usb5: SerialNumber: 0000:00:14.5
[    1.396593] hub 5-0:1.0: USB hub found
[    1.396618] hub 5-0:1.0: 2 ports detected
[    1.535826] ata1: SATA link down (SStatus 0 SControl 300)
[    1.539869] ata2: SATA link down (SStatus 0 SControl 300)
[    1.539924] ata3: SATA link down (SStatus 0 SControl 300)
[    1.539967] ata5: SATA link down (SStatus 0 SControl 300)
[    1.547889] ata6: SATA link down (SStatus 0 SControl 300)
[    1.711823] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.712576] ata4.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100
[    1.712587] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.713377] ata4.00: configured for UDMA/100
[    1.713949] scsi 3:0:0:0: Direct-Access     ATA      M4-CT256M4SSD2   070H PQ: 0 ANSI: 5
[    1.724121] sd 3:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.724272] sd 3:0:0:0: [sda] Write Protect is off
[    1.724278] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.724324] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.725968]  sda: sda1 sda2
[    1.726877] sd 3:0:0:0: [sda] Attached SCSI disk
[    1.728163] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    1.751613] usb 3-3: new low-speed USB device number 2 using ohci-pci
[    1.782191] device-mapper: uevent: version 1.0.3
[    1.782359] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.923998] usb 3-3: New USB device found, idVendor=046d, idProduct=c312
[    1.924016] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.924025] usb 3-3: Product: USB Multimedia Keyboard
[    1.924033] usb 3-3: Manufacturer: LITEON Technology
[    1.929152] hidraw: raw HID events driver (C) Jiri Kosina
[    1.935348] usbcore: registered new interface driver usbhid
[    1.935355] usbhid: USB HID core driver
[    1.937967] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:046D:C312.0001/input/input4
[    1.938093] hid-generic 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:12.0-3/input0
[    2.003808] tsc: Refined TSC clocksource calibration: 1599.999 MHz
[    2.187809] usb 3-4: new low-speed USB device number 3 using ohci-pci
[    2.354169] usb 3-4: New USB device found, idVendor=1241, idProduct=1122
[    2.354181] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.363753] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.0/0003:1241:1122.0002/input/input5
[    2.363926] hid-generic 0003:1241:1122.0002: input,hidraw1: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-4/input0
[    2.731810] usb 2-2: new high-speed USB device number 2 using ehci-pci
[    2.881886] usb 2-2: New USB device found, idVendor=148f, idProduct=2870
[    2.881898] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.881903] usb 2-2: Product: 802.11 n WLAN
[    2.881907] usb 2-2: Manufacturer: Ralink
[    3.004211] Switched to clocksource tsc
[    4.820816] NET: Registered protocol family 38
[    5.212571] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    5.260046] random: nonblocking pool is initialized
[    6.177560] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    6.177693] systemd[1]: Found ordering cycle on basic.target/start
[    6.177701] systemd[1]: Found dependency on sysinit.target/start
[    6.177708] systemd[1]: Found dependency on rpcbind.service/start
[    6.177716] systemd[1]: Found dependency on network-online.target/start
[    6.177723] systemd[1]: Found dependency on network.target/start
[    6.177730] systemd[1]: Found dependency on systemd-networkd.service/start
[    6.177736] systemd[1]: Found dependency on dbus.service/start
[    6.177742] systemd[1]: Found dependency on basic.target/start
[    6.177749] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start
[    6.177757] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
[    7.349097] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[    7.562908] lp: driver loaded but no devices found
[    7.566990] ppdev: user-space parallel port driver
[    7.608779] fuse init (API version 7.23)
[    7.632808] w83627ehf: Found NCT6775F chip at 0x290
[    7.678059] systemd-udevd[240]: starting version 215
[    8.068896] ACPI: acpi_idle registered with cpuidle
[    8.107358] acpi-cpufreq: overriding BIOS provided _PSD data
[    8.134217] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[    8.134232] ACPI: Power Button [PWRB]
[    8.134349] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    8.134354] ACPI: Power Button [PWRF]
[    8.184379] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    8.184539] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x8060
[    8.193445] [drm] Initialized drm 1.1.0 20060810
[    8.207829] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    8.207955] sp5100_tco: PCI Revision ID: 0x42
[    8.208001] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[    8.208016] sp5100_tco: Last reboot was not triggered by watchdog.
[    8.208141] sp5100_tco: initialized (0xf7e2eb00). heartbeat=60 sec (nowayout=0)
[    8.262397] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard
[    8.294585] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.347083] snd_hda_intel 0000:00:01.1: irq 43 for MSI/MSI-X
[    8.401822] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[    8.566464] sound hdaudioC1D0: ALC892: SKU not ready 0x00000100
[    8.566915] sound hdaudioC1D0: autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[    8.566921] sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.566930] sound hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    8.566935] sound hdaudioC1D0:    mono: mono_out=0x0
[    8.566939] sound hdaudioC1D0:    dig-out=0x1e/0x0
[    8.566943] sound hdaudioC1D0:    inputs:
[    8.566948] sound hdaudioC1D0:      Rear Mic=0x18
[    8.566953] sound hdaudioC1D0:      Front Mic=0x19
[    8.566957] sound hdaudioC1D0:      Line=0x1a
[    8.566961] sound hdaudioC1D0:      CD=0x1c
[    8.579248] kvm: Nested Virtualization enabled
[    8.579259] kvm: Nested Paging enabled
[    8.589552] [drm] radeon kernel modesetting enabled.
[    8.592404] systemd-udevd[282]: renamed network interface eth0 to eth10
[    8.605361] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input9
[    8.606995] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[    8.607466] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[    8.607970] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[    8.608055] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[    8.608141] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[    8.608219] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[    8.608295] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[    8.608374] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
[    8.792206] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
[    8.792237] [drm] register mmio base: 0xF0100000
[    8.792240] [drm] register mmio size: 262144
[    8.792326] ATOM BIOS: AMD
[    8.792412] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[    8.792418] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[    8.792423] [drm] Detected VRAM RAM=384M, BAR=256M
[    8.792426] [drm] RAM width 32bits DDR
[    8.809849] [TTM] Zone  kernel: Available graphics memory: 414588 kiB
[    8.809858] [TTM] Zone highmem: Available graphics memory: 3948584 kiB
[    8.809861] [TTM] Initializing pool allocator
[    8.809873] [TTM] Initializing DMA pool allocator
[    8.809921] [drm] radeon: 384M of VRAM memory ready
[    8.809925] [drm] radeon: 1024M of GTT memory ready.
[    8.809956] [drm] Loading PALM Microcode
[    8.847925] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin
[    8.867281] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin
[    8.876401] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin
[    8.876424] [drm] Internal thermal controller without fan control
[    8.876558] [drm] Found smc ucode version: 0x00010601
[    8.876648] [drm] radeon: dpm initialized
[    8.896992] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
[    8.897090] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    8.920550] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[    8.921171] radeon 0000:00:01.0: WB enabled
[    8.921180] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xff6ddc00
[    8.921186] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xff6ddc0c
[    8.923154] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf8632118
[    8.923160] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    8.923163] [drm] Driver supports precise vblank timestamp query.
[    8.923167] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[    8.923204] radeon 0000:00:01.0: irq 44 for MSI/MSI-X
[    8.923230] radeon 0000:00:01.0: radeon: using MSI.
[    8.923271] [drm] radeon: irq initialized.
[    8.942455] [drm] ring test on 0 succeeded in 1 usecs
[    8.942472] [drm] ring test on 3 succeeded in 3 usecs
[    9.000557] [drm] ring test on 5 succeeded in 1 usecs
[    9.026071] [drm] UVD initialized successfully.
[    9.026378] [drm] ib test on ring 0 succeeded in 0 usecs
[    9.026417] [drm] ib test on ring 3 succeeded in 0 usecs
[    9.049303] [drm] ib test on ring 5 succeeded
[    9.076147] [drm] Radeon Display Connectors
[    9.076156] [drm] Connector 0:
[    9.076158] [drm]   HDMI-A-1
[    9.076161] [drm]   HPD1
[    9.076166] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    9.076169] [drm]   Encoders:
[    9.076172] [drm]     DFP1: INTERNAL_UNIPHY
[    9.076175] [drm] Connector 1:
[    9.076177] [drm]   HDMI-A-2
[    9.076179] [drm]   HPD2
[    9.076183] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    9.076185] [drm]   Encoders:
[    9.076187] [drm]     DFP2: INTERNAL_UNIPHY
[    9.076190] [drm] Connector 2:
[    9.076192] [drm]   VGA-1
[    9.076196] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[    9.076198] [drm]   Encoders:
[    9.076200] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    9.116594] [drm] fb mappable at 0xE0477000
[    9.116598] [drm] vram apper at 0xE0000000
[    9.116600] [drm] size 5242880
[    9.116603] [drm] fb depth is 24
[    9.116605] [drm]    pitch is 5120
[    9.119153] fbcon: radeondrmfb (fb0) is primary device
[    9.123365] cfg80211: Calling CRDA to update world regulatory domain
[    9.159717] Console: switching to colour frame buffer device 160x64
[    9.170362] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[    9.170368] radeon 0000:00:01.0: registered panic notifier
[    9.182726] [drm] Initialized radeon 2.39.0 20080528 for 0000:00:01.0 on minor 0
[    9.315948] usb 2-2: reset high-speed USB device number 2 using ehci-pci
[    9.391350] cfg80211: World regulatory domain updated:
[    9.391368] cfg80211:  DFS Master region: unset
[    9.391375] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    9.391386] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    9.391395] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    9.391403] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    9.391412] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    9.391421] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    9.391429] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    9.391436] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    9.391443] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    9.457648] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected
[    9.504445] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
[    9.514915] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
[    9.600578] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    9.601228] usbcore: registered new interface driver rt2800usb
[    9.683853] systemd-udevd[275]: renamed network interface wlan0 to wlan1
[    9.684983] systemd-journald[228]: Received request to flush runtime journal from PID 1
[   10.249926] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[   10.251197] rt2800usb 2-2:1.0: firmware: direct-loading firmware rt2870.bin
[   10.251219] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[   10.467848] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   11.530806] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
[   11.675543] r8169 0000:03:00.0 eth10: link down
[   11.683652] IPv6: ADDRCONF(NETDEV_UP): eth10: link is not ready
[   30.714693] wlan1: authenticate with 34:31:c4:bd:c8:97
[   30.760521] wlan1: send auth to 34:31:c4:bd:c8:97 (try 1/3)
[   30.769082] wlan1: authenticated
[   30.771866] wlan1: associate with 34:31:c4:bd:c8:97 (try 1/3)
[   30.798419] wlan1: RX AssocResp from 34:31:c4:bd:c8:97 (capab=0x431 status=0 aid=6)
[   30.809302] wlan1: associated
[   30.809342] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   30.810183] cfg80211: Calling CRDA for country: DE
[   30.822007] cfg80211: Regulatory domain changed to country: DE
[   30.822019] cfg80211:  DFS Master region: ETSI
[   30.822023] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   30.822029] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   30.822034] cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   30.822039] cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   30.822043] cfg80211:   (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[   30.822047] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)