[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt20-1+deb8u3 (2016-01-17)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7f9cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c7f9d000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.1 07/13/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF8000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000021f000000 aka 8688M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f5d20-0x000f5d2f] mapped at [c00f5d20]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
[    0.000000]  [mem 0x37200000-0x373fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
[    0.000000]  [mem 0x34000000-0x371fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
[    0.000000]  [mem 0x37400000-0x375fdfff] page 4k
[    0.000000] BRK [0x0179c000, 0x0179cfff] PGTABLE
[    0.000000] BRK [0x0179d000, 0x0179efff] PGTABLE
[    0.000000] BRK [0x0179f000, 0x0179ffff] PGTABLE
[    0.000000] BRK [0x017a0000, 0x017a0fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3604a000-0x3701cfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F5F20 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000C7FB80E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000C7FBA860 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000C7FB8250 002610 (v02 ASROCK COREBOOT 00010001 INTL 20150619)
[    0.000000] ACPI: FACS 0x00000000C7FB8210 000040
[    0.000000] ACPI: SSDT 0x00000000C7FBA960 000045 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0x00000000C7FBA9B0 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000C7FBA9F0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HEST 0x00000000C7FBAA50 000028 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 0x00000000C7FBAA80 00168E (v02 AMD    ALIB     00000001 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000C7FBC110 0003DE (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: HPET 0x00000000C7FBC4F0 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 7802MB HIGHMEM available.
[    0.000000] 885MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 375fe000
[    0.000000]   low ram: 0 - 375fe000
[    0.000000] BRK [0x017a1000, 0x017a1fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x375fdfff]
[    0.000000]   HighMem  [mem 0x375fe000-0x1effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xc7f9cfff]
[    0.000000]   node   0: [mem 0x00000000-0x1effffff]
[    0.000000] On node 0 totalpages: 1994555
[    0.000000] free_area_init_node: node 0, pgdat c165d180, node_mem_map f1c6a020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1740 pages used for memmap
[    0.000000]   Normal zone: 222718 pages, LIFO batch:31
[    0.000000]   HighMem zone: 15605 pages used for memmap
[    0.000000]   HighMem zone: 1767839 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f75d0000 s34752 r0 d22592 u57344
[    0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1992783
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-686-pae root=UUID=0198e82a-32df-4f18-bec0-3e08802b084d ro quiet noisapnp pcie_aspm=force pcie_aspm.policy=powersave nmi_watchdog=0
[    0.000000] PCIe ASPM is forcibly enabled
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000375fe:0021f000)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 7883652K/7978220K available (4608K kernel code, 522K rwdata, 1452K rodata, 656K init, 460K bss, 94568K reserved, 7071356K highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
    vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
      .init : 0xc1671000 - 0xc1715000   ( 656 kB)
      .data : 0xc148044c - 0xc166fb40   (1981 kB)
      .text : 0xc1000000 - 0xc148044c   (4609 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f1806000 soft=f1808000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1600.117 MHz processor
[    0.000055] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.23 BogoMIPS (lpj=6400468)
[    0.000062] pid_max: default: 32768 minimum: 301
[    0.000079] ACPI: Core revision 20140424
[    0.006130] ACPI: All ACPI Tables successfully acquired
[    0.006178] Security Framework initialized
[    0.006197] AppArmor: AppArmor disabled by boot time parameter
[    0.006201] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.006235] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.006240] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.006645] Initializing cgroup subsys memory
[    0.006657] Initializing cgroup subsys devices
[    0.006671] Initializing cgroup subsys freezer
[    0.006678] Initializing cgroup subsys net_cls
[    0.006689] Initializing cgroup subsys blkio
[    0.006698] Initializing cgroup subsys perf_event
[    0.006703] Initializing cgroup subsys net_prio
[    0.006746] CPU: Physical Processor ID: 0
[    0.006749] CPU: Processor Core ID: 0
[    0.006754] mce: CPU supports 6 MCE banks
[    0.006774] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
[    0.007106] Freeing SMP alternatives memory: 20K (c1715000 - c171a000)
[    0.009293] ftrace: allocating 20810 entries in 41 pages
[    0.028683] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.029147] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.068840] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
[    0.176551] Performance Events: AMD PMU driver.
[    0.176561] ... version:                0
[    0.176563] ... bit width:              48
[    0.176566] ... generic registers:      4
[    0.176569] ... value mask:             0000ffffffffffff
[    0.176571] ... max period:             00007fffffffffff
[    0.176574] ... fixed-purpose events:   0
[    0.176577] ... event mask:             000000000000000f
[    0.179823] CPU 1 irqstacks, hard=f193e000 soft=f1940000
[    0.179832] x86: Booting SMP configuration:
[    0.179835] .... node  #0, CPUs:      #1
[    0.189876] Initializing CPU#1
[    0.193047] x86: Booted up 1 node, 2 CPUs
[    0.193054] smpboot: Total of 2 processors activated (6400.46 BogoMIPS)
[    0.193862] devtmpfs: initialized
[    0.196609] pinctrl core: initialized pinctrl subsystem
[    0.196781] NET: Registered protocol family 16
[    0.197004] cpuidle: using governor ladder
[    0.197010] cpuidle: using governor menu
[    0.197320] ACPI: bus type PCI registered
[    0.197325] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.197647] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.197652] bios32_service(0x49435024): not present
[    0.197655] PCI: Using configuration type 1 for base access
[    0.197657] PCI: Using configuration type 1 for extended access
[    0.210815] ACPI: Added _OSI(Module Device)
[    0.210823] ACPI: Added _OSI(Processor Device)
[    0.210827] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.210830] ACPI: Added _OSI(Processor Aggregator Device)
[    0.213142] ACPI: Executed 2 blocks of module-level executable AML code
[    0.217478] ACPI: Interpreter enabled
[    0.217500] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.217526] ACPI: (supports S0 S1 S3 S4 S5)
[    0.217530] ACPI: Using IOAPIC for interrupt routing
[    0.217560] HEST: Table parsing has been initialized.
[    0.217569] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.233434] ACPI: Power Resource [PFN0] (on)
[    0.233835] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.233846] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.233985] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.234456] PCI host bridge to bus 0000:00
[    0.234463] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.234468] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.234472] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.234477] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.234482] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[    0.234499] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[    0.234684] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[    0.234704] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.234715] pci 0000:00:01.0: reg 0x14: [io  0x2000-0x20ff]
[    0.234726] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff]
[    0.234793] pci 0000:00:01.0: supports D1 D2
[    0.234872] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.234966] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[    0.234983] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff]
[    0.235061] pci 0000:00:01.1: supports D1 D2
[    0.235138] pci 0000:00:01.1: System wakeup disabled by ACPI
[    0.235306] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.235334] pci 0000:00:11.0: reg 0x10: [io  0x2410-0x2417]
[    0.235349] pci 0000:00:11.0: reg 0x14: [io  0x2420-0x2423]
[    0.235363] pci 0000:00:11.0: reg 0x18: [io  0x2418-0x241f]
[    0.235378] pci 0000:00:11.0: reg 0x1c: [io  0x2424-0x2427]
[    0.235392] pci 0000:00:11.0: reg 0x20: [io  0x2400-0x240f]
[    0.235407] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff]
[    0.235677] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.235698] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff]
[    0.235843] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.236006] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.236034] pci 0000:00:12.2: reg 0x10: [mem 0xf014b400-0xf014b4ff]
[    0.236145] pci 0000:00:12.2: supports D1 D2
[    0.236149] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.236230] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.236325] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.236346] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff]
[    0.236489] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.236654] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.236682] pci 0000:00:13.2: reg 0x10: [mem 0xf014b500-0xf014b5ff]
[    0.236794] pci 0000:00:13.2: supports D1 D2
[    0.236798] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.236879] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.237043] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.237314] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.237345] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit]
[    0.237435] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.237661] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.237955] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.238075] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.238225] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.238247] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff]
[    0.238395] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.238554] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    0.238663] pci 0000:00:15.0: supports D1 D2
[    0.238749] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.238908] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[    0.239023] pci 0000:00:15.1: supports D1 D2
[    0.239109] pci 0000:00:15.1: System wakeup disabled by ACPI
[    0.239271] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[    0.239436] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[    0.239599] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[    0.239763] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[    0.239937] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[    0.240102] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[    0.240262] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[    0.240424] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[    0.240777] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[    0.240793] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.240797] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.240802] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.240806] pci 0000:00:14.4:   bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[    0.240911] pci 0000:00:15.0: PCI bridge to [bus 02]
[    0.241129] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.241159] pci 0000:03:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.241200] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.241226] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.241356] pci 0000:03:00.0: supports D1 D2
[    0.241360] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.249365] pci 0000:00:15.1: PCI bridge to [bus 03]
[    0.249393] pci 0000:00:15.1:   bridge window [io  0x1000-0x1fff]
[    0.249411] pci 0000:00:15.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.249445] pci_bus 0000:00: on NUMA node 0
[    0.250283] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.250437] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.250530] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.250622] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.250713] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.250804] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
[    0.250890] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.250983] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.251290] ACPI: Enabled 6 GPEs in block 00 to 1F
[    0.251698] vgaarb: setting as boot device: PCI:0000:00:01.0
[    0.251708] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.251720] vgaarb: loaded
[    0.251723] vgaarb: bridge control possible 0000:00:01.0
[    0.251876] PCI: Using ACPI for IRQ routing
[    0.251882] PCI: pci_cache_line_size set to 64 bytes
[    0.252036] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.252042] e820: reserve RAM buffer [mem 0xc7f9d000-0xc7ffffff]
[    0.252045] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[    0.252360] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.252369] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.254548] Switched to clocksource hpet
[    0.265268] pnp: PnP ACPI init
[    0.265299] ACPI: bus type PNP registered
[    0.265753] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.266034] pnp: PnP ACPI: found 1 devices
[    0.266037] ACPI: bus type PNP unregistered
[    0.266044] PnPBIOS: Disabled by ACPI PNP
[    0.311272] pci 0000:00:14.4: PCI bridge to [bus 01]
[    0.311299] pci 0000:00:15.0: PCI bridge to [bus 02]
[    0.311316] pci 0000:00:15.1: PCI bridge to [bus 03]
[    0.311323] pci 0000:00:15.1:   bridge window [io  0x1000-0x1fff]
[    0.311335] pci 0000:00:15.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.311347] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.311352] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.311356] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.311361] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[    0.311366] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.311370] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.311374] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.311379] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff]
[    0.311383] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.311387] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.311559] NET: Registered protocol family 2
[    0.312230] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.312261] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.312299] TCP: Hash tables configured (established 8192 bind 8192)
[    0.312345] TCP: reno registered
[    0.312350] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.312363] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.312548] NET: Registered protocol family 1
[    0.312581] pci 0000:00:01.0: Video device with shadowed ROM
[    0.368762] PCI: CLS 64 bytes, default 64
[    0.368892] Unpacking initramfs...
[    1.005679] Freeing initrd memory: 16204K (f604a000 - f701d000)
[    1.006256] microcode: CPU0: patch_level=0x05000119
[    1.006273] microcode: CPU1: patch_level=0x05000119
[    1.006669] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.006690] LVT offset 0 assigned for vector 0x400
[    1.006817] perf: AMD IBS detected (0x000000ff)
[    1.007553] futex hash table entries: 512 (order: 3, 32768 bytes)
[    1.007675] audit: initializing netlink subsys (disabled)
[    1.007718] audit: type=2000 audit(1453879241.896:1): initialized
[    1.008533] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.008577] zbud: loaded
[    1.008940] VFS: Disk quotas dquot_6.5.2
[    1.008984] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.009161] msgmni has been set to 1618
[    1.010410] alg: No test for stdrng (krng)
[    1.010474] bounce: pool size: 64 pages
[    1.010653] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.010745] io scheduler noop registered
[    1.010751] io scheduler deadline registered
[    1.010882] io scheduler cfq registered (default)
[    1.011457] pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
[    1.011896] pcieport 0000:00:15.1: irq 41 for MSI/MSI-X
[    1.012144] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[    1.012153] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[    1.012187] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[    1.012191] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.012200] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[    1.012235] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.012275] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.012396] GHES: Failed to enable APEI firmware first mode.
[    1.012407] isapnp: ISA Plug & Play support disabled
[    1.012780] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.033506] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.035135] Linux agpgart interface v0.103
[    1.035512] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.039430] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.039452] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.040235] mousedev: PS/2 mouse device common for all mice
[    1.040432] rtc_cmos 00:00: RTC can wake from S4
[    1.040836] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    1.040952] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[    1.040996] ledtrig-cpu: registered to indicate activity on CPUs
[    1.041321] TCP: cubic registered
[    1.041489] NET: Registered protocol family 10
[    1.042089] mip6: Mobile IPv6
[    1.042097] NET: Registered protocol family 17
[    1.042109] mpls_gso: MPLS GSO support
[    1.042640] Using IPI No-Shortcut mode
[    1.043082] registered taskstats version 1
[    1.043870] rtc_cmos 00:00: setting system clock to 2016-01-27 07:20:42 UTC (1453879242)
[    1.043961] PM: Hibernation image not present or could not be loaded.
[    1.044540] Freeing unused kernel memory: 656K (c1671000 - c1715000)
[    1.044692] Write protecting the kernel text: 4612k
[    1.044835] Write protecting the kernel read-only data: 1456k
[    1.044838] NX-protecting the kernel data: 3580k
[    1.144158] systemd-udevd[61]: starting version 215
[    1.144978] random: systemd-udevd urandom read with 0 bits of entropy available
[    1.164180] ACPI: bus type USB registered
[    1.164248] usbcore: registered new interface driver usbfs
[    1.164275] usbcore: registered new interface driver hub
[    1.173650] usbcore: registered new device driver usb
[    1.174848] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.175517] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.175895] ehci-pci: EHCI PCI platform driver
[    1.176154] QUIRK: Enable AMD PLL fix
[    1.176198] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.176214] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.176226] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.176311] ehci-pci 0000:00:12.2: debug port 1
[    1.176384] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014b400
[    1.176864] SCSI subsystem initialized
[    1.179657] libata version 3.00 loaded.
[    1.186875] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.187018] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.187024] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.187028] usb usb1: Product: EHCI Host Controller
[    1.187032] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[    1.187036] usb usb1: SerialNumber: 0000:00:12.2
[    1.187405] hub 1-0:1.0: USB hub found
[    1.187424] hub 1-0:1.0: 5 ports detected
[    1.188078] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.188094] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.188102] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.188119] ehci-pci 0000:00:13.2: debug port 1
[    1.188171] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014b500
[    1.193526] thermal LNXTHERM:00: registered as thermal_zone0
[    1.193536] ACPI: Thermal Zone [TZ00] (40 C)
[    1.195885] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.196416] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[    1.196845] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xf7e10000, bc:5f:f4:c8:d3:98, XID 0c200000 IRQ 42
[    1.196851] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.198782] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.198901] ACPI: Fan [FAN0] (on)
[    1.198940] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.198946] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.198951] usb usb2: Product: EHCI Host Controller
[    1.198957] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[    1.198964] usb usb2: SerialNumber: 0000:00:13.2
[    1.199343] hub 2-0:1.0: USB hub found
[    1.199373] hub 2-0:1.0: 5 ports detected
[    1.199842] ahci 0000:00:11.0: version 3.0
[    1.200335] ohci-pci: OHCI PCI platform driver
[    1.200473] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.200481] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part 
[    1.203356] scsi0 : ahci
[    1.204145] scsi1 : ahci
[    1.204781] scsi2 : ahci
[    1.205255] scsi3 : ahci
[    1.205516] scsi4 : ahci
[    1.206014] scsi5 : ahci
[    1.206201] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19
[    1.206207] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19
[    1.206211] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19
[    1.206217] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19
[    1.206221] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19
[    1.206226] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19
[    1.206651] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.206677] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.206818] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000
[    1.266873] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.266883] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.266887] usb usb3: Product: OHCI PCI host controller
[    1.266892] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
[    1.266895] usb usb3: SerialNumber: 0000:00:12.0
[    1.267498] hub 3-0:1.0: USB hub found
[    1.267522] hub 3-0:1.0: 5 ports detected
[    1.268190] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.268205] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[    1.268258] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000
[    1.326940] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.326950] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.326955] usb usb4: Product: OHCI PCI host controller
[    1.326959] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
[    1.326963] usb usb4: SerialNumber: 0000:00:13.0
[    1.327569] hub 4-0:1.0: USB hub found
[    1.327593] hub 4-0:1.0: 5 ports detected
[    1.328227] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.328240] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[    1.328289] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000
[    1.387016] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.387026] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.387031] usb usb5: Product: OHCI PCI host controller
[    1.387036] usb usb5: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
[    1.387039] usb usb5: SerialNumber: 0000:00:14.5
[    1.387420] hub 5-0:1.0: USB hub found
[    1.387507] hub 5-0:1.0: 2 ports detected
[    1.526878] ata2: SATA link down (SStatus 0 SControl 300)
[    1.526933] ata1: SATA link down (SStatus 0 SControl 300)
[    1.526976] ata3: SATA link down (SStatus 0 SControl 300)
[    1.527018] ata6: SATA link down (SStatus 0 SControl 300)
[    1.527049] ata5: SATA link down (SStatus 0 SControl 300)
[    1.698936] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.699677] ata4.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100
[    1.699688] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.700575] ata4.00: configured for UDMA/100
[    1.701285] scsi 3:0:0:0: Direct-Access     ATA      M4-CT256M4SSD2   070H PQ: 0 ANSI: 5
[    1.710893] sd 3:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.711035] sd 3:0:0:0: [sda] Write Protect is off
[    1.711042] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.711086] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.712102]  sda: sda1 sda2
[    1.713288] sd 3:0:0:0: [sda] Attached SCSI disk
[    1.714459] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    1.770691] device-mapper: uevent: version 1.0.3
[    1.770914] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    2.002855] tsc: Refined TSC clocksource calibration: 1599.999 MHz
[    2.070864] usb 2-2: new high-speed USB device number 2 using ehci-pci
[    2.220712] usb 2-2: New USB device found, idVendor=148f, idProduct=2870
[    2.220731] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.220740] usb 2-2: Product: 802.11 n WLAN
[    2.220748] usb 2-2: Manufacturer: Ralink
[    2.358861] usb 3-1: new low-speed USB device number 2 using ohci-pci
[    2.532036] usb 3-1: New USB device found, idVendor=046d, idProduct=c312
[    2.532053] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.532062] usb 3-1: Product: USB Multimedia Keyboard
[    2.532070] usb 3-1: Manufacturer: LITEON Technology
[    2.536318] hidraw: raw HID events driver (C) Jiri Kosina
[    2.543469] usbcore: registered new interface driver usbhid
[    2.543477] usbhid: USB HID core driver
[    2.545893] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:046D:C312.0001/input/input2
[    2.546066] hid-generic 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:12.0-1/input0
[    2.798859] usb 3-2: new full-speed USB device number 3 using ohci-pci
[    2.963983] usb 3-2: New USB device found, idVendor=1b1a, idProduct=7001
[    2.964000] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.964009] usb 3-2: Product:  USB  Mouse 
[    2.970688] input:  USB  Mouse  as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1B1A:7001.0002/input/input3
[    2.970861] hid-generic 0003:1B1A:7001.0002: input,hidraw1: USB HID v1.10 Mouse [ USB  Mouse ] on usb-0000:00:12.0-2/input0
[    2.976145] input:  USB  Mouse  as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:1B1A:7001.0003/input/input4
[    2.976236] hid-generic 0003:1B1A:7001.0003: input,hidraw2: USB HID v1.10 Keyboard [ USB  Mouse ] on usb-0000:00:12.0-2/input1
[    3.003259] Switched to clocksource tsc
[    7.398239] random: nonblocking pool is initialized
[    8.984687] NET: Registered protocol family 38
[    9.375668] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   10.346008] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[   10.346040] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[   10.346054] systemd[1]: Cannot add dependency job for unit NetworkManager-wait-online.service, ignoring: Unit NetworkManager-wait-online.service failed to load: No such file or directory.
[   10.346179] systemd[1]: Found ordering cycle on basic.target/start
[   10.346186] systemd[1]: Found dependency on sysinit.target/start
[   10.346193] systemd[1]: Found dependency on rpcbind.service/start
[   10.346200] systemd[1]: Found dependency on network-online.target/start
[   10.346206] systemd[1]: Found dependency on network.target/start
[   10.346213] systemd[1]: Found dependency on systemd-networkd.service/start
[   10.346219] systemd[1]: Found dependency on dbus.service/start
[   10.346225] systemd[1]: Found dependency on basic.target/start
[   10.346232] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start
[   10.346239] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
[   11.519476] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[   11.751567] lp: driver loaded but no devices found
[   11.763931] ppdev: user-space parallel port driver
[   11.772079] parport0: PC-style at 0x378 [PCSPP,EPP]
[   11.772094] parport0: irq 0 detected
[   11.819675] systemd-udevd[239]: starting version 215
[   11.866972] lp0: using parport0 (polling).
[   11.879339] fuse init (API version 7.23)
[   11.912602] w83627ehf: Found NCT6775F chip at 0x290
[   12.312560] ACPI: acpi_idle registered with cpuidle
[   12.332918] acpi-cpufreq: overriding BIOS provided _PSD data
[   12.340215] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[   12.340231] ACPI: Power Button [PWRB]
[   12.340359] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   12.340364] ACPI: Power Button [PWRF]
[   12.352871] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0B (\SMB0) (20140424/utaddress-254)
[   12.352890] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.384777] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard
[   12.389339] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   12.389471] sp5100_tco: PCI Revision ID: 0x42
[   12.389586] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[   12.389601] sp5100_tco: Last reboot was not triggered by watchdog.
[   12.389741] sp5100_tco: initialized (0xf7e40b00). heartbeat=60 sec (nowayout=0)
[   12.390720] [drm] Initialized drm 1.1.0 20060810
[   12.432424] snd_hda_intel 0000:00:01.1: irq 43 for MSI/MSI-X
[   12.491787] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
[   12.517422] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.527389] sound hdaudioC1D0: ALC892: SKU not ready 0x00000100
[   12.527882] sound hdaudioC1D0: autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[   12.527888] sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.527897] sound hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   12.527901] sound hdaudioC1D0:    mono: mono_out=0x0
[   12.527906] sound hdaudioC1D0:    dig-out=0x1e/0x0
[   12.527909] sound hdaudioC1D0:    inputs:
[   12.527915] sound hdaudioC1D0:      Rear Mic=0x18
[   12.527920] sound hdaudioC1D0:      Front Mic=0x19
[   12.527924] sound hdaudioC1D0:      Line=0x1a
[   12.527928] sound hdaudioC1D0:      CD=0x1c
[   12.548878] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input8
[   12.549296] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[   12.549376] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[   12.549455] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[   12.549531] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[   12.549605] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[   12.549677] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[   12.549751] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[   12.549825] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[   12.612414] [drm] radeon kernel modesetting enabled.
[   12.652496] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
[   12.652527] [drm] register mmio base: 0xF0100000
[   12.652530] [drm] register mmio size: 262144
[   12.652709] ATOM BIOS: AMD
[   12.658941] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[   12.658948] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[   12.658953] [drm] Detected VRAM RAM=384M, BAR=256M
[   12.658956] [drm] RAM width 32bits DDR
[   12.663481] [TTM] Zone  kernel: Available graphics memory: 414588 kiB
[   12.663487] [TTM] Zone highmem: Available graphics memory: 3950266 kiB
[   12.663490] [TTM] Initializing pool allocator
[   12.663502] [TTM] Initializing DMA pool allocator
[   12.663552] [drm] radeon: 384M of VRAM memory ready
[   12.663556] [drm] radeon: 1024M of GTT memory ready.
[   12.663581] [drm] Loading PALM Microcode
[   12.738748] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin
[   12.742237] kvm: Nested Virtualization enabled
[   12.742245] kvm: Nested Paging enabled
[   12.751706] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin
[   12.765160] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin
[   12.765181] [drm] Internal thermal controller without fan control
[   12.766116] [drm] Found smc ucode version: 0x00010601
[   12.782726] [drm] radeon: dpm initialized
[   12.806953] systemd-udevd[281]: renamed network interface eth0 to eth10
[   12.874820] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
[   12.874964] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   12.905393] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[   12.907978] radeon 0000:00:01.0: WB enabled
[   12.907993] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xff6d1c00
[   12.907999] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xff6d1c0c
[   12.909887] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf86b2118
[   12.909893] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.909896] [drm] Driver supports precise vblank timestamp query.
[   12.909900] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[   12.909938] radeon 0000:00:01.0: irq 44 for MSI/MSI-X
[   12.909963] radeon 0000:00:01.0: radeon: using MSI.
[   12.910003] [drm] radeon: irq initialized.
[   12.929016] [drm] ring test on 0 succeeded in 1 usecs
[   12.929030] [drm] ring test on 3 succeeded in 3 usecs
[   12.976627] [drm] ring test on 5 succeeded in 0 usecs
[   12.977671] [drm] UVD initialized successfully.
[   12.978196] [drm] ib test on ring 0 succeeded in 0 usecs
[   12.981020] [drm] ib test on ring 3 succeeded in 0 usecs
[   12.982984] [drm] ib test on ring 5 succeeded
[   12.984826] [drm] Radeon Display Connectors
[   12.984831] [drm] Connector 0:
[   12.984834] [drm]   HDMI-A-1
[   12.984836] [drm]   HPD1
[   12.984840] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   12.984843] [drm]   Encoders:
[   12.984846] [drm]     DFP1: INTERNAL_UNIPHY
[   12.984848] [drm] Connector 1:
[   12.984850] [drm]   HDMI-A-2
[   12.984852] [drm]   HPD2
[   12.984856] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   12.984858] [drm]   Encoders:
[   12.984861] [drm]     DFP2: INTERNAL_UNIPHY
[   12.984863] [drm] Connector 2:
[   12.984865] [drm]   VGA-1
[   12.984869] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[   12.984871] [drm]   Encoders:
[   12.984873] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   13.131325] [drm] fb mappable at 0xE0477000
[   13.131333] [drm] vram apper at 0xE0000000
[   13.131336] [drm] size 5242880
[   13.131338] [drm] fb depth is 24
[   13.131341] [drm]    pitch is 5120
[   13.131527] fbcon: radeondrmfb (fb0) is primary device
[   13.175928] Console: switching to colour frame buffer device 160x64
[   13.188532] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[   13.188538] radeon 0000:00:01.0: registered panic notifier
[   13.201161] [drm] Initialized radeon 2.39.0 20080528 for 0000:00:01.0 on minor 0
[   13.436678] cfg80211: Calling CRDA to update world regulatory domain
[   13.662692] usb 2-2: reset high-speed USB device number 2 using ehci-pci
[   13.713550] cfg80211: World regulatory domain updated:
[   13.713563] cfg80211:  DFS Master region: unset
[   13.713568] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   13.713576] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   13.713581] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   13.713587] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   13.713593] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   13.713599] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   13.713604] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   13.713609] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   13.713613] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   13.759768] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
[   13.804460] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected
[   13.846514] systemd-journald[226]: Received request to flush runtime journal from PID 1
[   13.859222] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
[   13.891261] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.892447] usbcore: registered new interface driver rt2800usb
[   13.975018] systemd-udevd[282]: renamed network interface wlan0 to wlan1
[   14.579718] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[   14.580966] rt2800usb 2-2:1.0: firmware: direct-loading firmware rt2870.bin
[   14.580991] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[   14.802749] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   15.835431] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
[   15.974327] r8169 0000:03:00.0 eth10: link down
[   15.974476] IPv6: ADDRCONF(NETDEV_UP): eth10: link is not ready
[   30.951157] wlan1: authenticate with 34:31:c4:bd:c8:97
[   30.995018] wlan1: send auth to 34:31:c4:bd:c8:97 (try 1/3)
[   31.000643] wlan1: authenticated
[   31.002862] wlan1: associate with 34:31:c4:bd:c8:97 (try 1/3)
[   31.023982] wlan1: RX AssocResp from 34:31:c4:bd:c8:97 (capab=0x31 status=0 aid=3)
[   31.034661] wlan1: associated
[   31.034701] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   31.035076] cfg80211: Calling CRDA for country: DE
[   31.047629] cfg80211: Regulatory domain changed to country: DE
[   31.047643] cfg80211:  DFS Master region: ETSI
[   31.047648] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   31.047655] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   31.047662] cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   31.047669] cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   31.047674] cfg80211:   (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[   31.047679] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)