blob: a0a5bee1cf826d29a5966b8dcf8d631912bec6fe [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.14-smp (root@hive) (gcc version 5.3.0 (GCC) ) #2 SMP Fri Jun 24 14:44:24 CDT 2016
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002ffd3fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000002ffd4000-0x000000002fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUS P2B-LS/P2B-LS, BIOS 4.6-585-g837da6ade7 06/28/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x2ffd4 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 020000000 mask FF0000000 write-back
[ 0.000000] 2 base 0F0000000 mask FFF800000 write-combining
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] initial memory mapped: [mem 0x00000000-0x027fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x0224c000, 0x0224cfff] PGTABLE
[ 0.000000] BRK [0x0224d000, 0x0224efff] PGTABLE
[ 0.000000] BRK [0x0224f000, 0x0224ffff] PGTABLE
[ 0.000000] BRK [0x02250000, 0x02250fff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI BIOS Error (bug): A valid RSDP was not found (20150930/tbxfroot-243)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000002ffd3fff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x2ffd2000-0x2ffd3fff]
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 767MB LOWMEM available.
[ 0.000000] max_low_pfn = 2ffd4, highstart_pfn = 2ffd4
[ 0.000000] Low memory ends at vaddr effd4000
[ 0.000000] High memory starts at vaddr effd4000
[ 0.000000] mapped low ram: 0 - 2ffd4000
[ 0.000000] low ram: 0 - 2ffd4000
[ 0.000000] Node: 0, start_pfn: 1, end_pfn: 9f
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 0
[ 0.000000] Node: 0, start_pfn: 100, end_pfn: 2ffd4
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000002ffd3fff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000002ffd3fff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000002ffd3fff]
[ 0.000000] On node 0 totalpages: 196466
[ 0.000000] free_area_init_node: node 0, pgdat effd2000, node_mem_map ef852028
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1880 pages used for memmap
[ 0.000000] Normal zone: 192468 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Found and enabled local APIC!
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x30000000-0xff7fffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 18 pages/cpu @ef83a000 s42636 r0 d31092 u73728
[ 0.000000] pcpu-alloc: s42636 r0 d31092 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194546
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=Linux ro root=801 vt.default_utf8=0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 758464K/785864K available (12341K kernel code, 927K rwdata, 3824K rodata, 832K init, 676K bss, 27400K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd37000 - 0xfffff000 (2848 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf07d4000 - 0xff9fe000 ( 242 MB)
lowmem : 0xc0000000 - 0xeffd4000 ( 767 MB)
.init : 0xc20b4000 - 0xc2184000 ( 832 kB)
.data : 0xc1c0d8e3 - 0xc20b2d80 (4757 kB)
.text : 0xc1000000 - 0xc1c0d8e3 (12342 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:32 16
[ 0.000000] CPU 0 irqstacks, hard=ef024000 soft=ef026000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1403.150 MHz processor
[ 0.001009] Calibrating delay loop (skipped), value calculated using timer frequency.. 2806.30 BogoMIPS (lpj=1403150)
[ 0.002009] pid_max: default: 32768 minimum: 301
[ 0.002224] Security Framework initialized
[ 0.002398] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002539] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003671] Initializing cgroup subsys io
[ 0.003847] Initializing cgroup subsys memory
[ 0.004069] Initializing cgroup subsys devices
[ 0.004217] Initializing cgroup subsys freezer
[ 0.004359] Initializing cgroup subsys net_cls
[ 0.004502] Initializing cgroup subsys perf_event
[ 0.004644] Initializing cgroup subsys net_prio
[ 0.004787] Initializing cgroup subsys pids
[ 0.005099] mce: CPU supports 5 MCE banks
[ 0.005287] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[ 0.005426] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.025825] Freeing SMP alternatives memory: 40K (c2184000 - c218e000)
[ 0.025969] ftrace: allocating 41039 entries in 81 pages
[ 0.052570] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.052735] smpboot: SMP motherboard not detected
[ 0.052869] smpboot: SMP disabled
[ 0.053036] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.155146] Performance Events: p6 PMU driver.
[ 0.155331] ... version: 0
[ 0.155466] ... bit width: 32
[ 0.155598] ... generic registers: 2
[ 0.155730] ... value mask: 00000000ffffffff
[ 0.155860] ... max period: 000000007fffffff
[ 0.155992] ... fixed-purpose events: 0
[ 0.156008] ... event mask: 0000000000000003
[ 0.157140] x86: Booted up 1 node, 1 CPUs
[ 0.157298] smpboot: Total of 1 processors activated (2806.30 BogoMIPS)
[ 0.157946] devtmpfs: initialized
[ 0.159506] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.160083] xor: measuring software checksum speed
[ 0.170004] pIII_sse : 2816.000 MB/sec
[ 0.180004] prefetch64-sse: 2996.000 MB/sec
[ 0.180140] xor: using function: prefetch64-sse (2996.000 MB/sec)
[ 0.180317] atomic64_test: passed for i586+ platform with CX8 and with SSE
[ 0.180457] pinctrl core: initialized pinctrl subsystem
[ 0.181403] NET: Registered protocol family 16
[ 0.182215] cpuidle: using governor ladder
[ 0.182358] cpuidle: using governor menu
[ 0.183924] PCI: PCI BIOS revision 2.10 entry at 0xfd4f7, last bus=1
[ 0.184005] PCI: Using configuration type 1 for base access
[ 0.215041] raid6: mmxx1 gen() 1332 MB/s
[ 0.232018] raid6: mmxx2 gen() 1578 MB/s
[ 0.249054] raid6: sse1x1 gen() 1214 MB/s
[ 0.266004] raid6: sse1x2 gen() 1566 MB/s
[ 0.283074] raid6: int32x1 gen() 410 MB/s
[ 0.300078] raid6: int32x1 xor() 210 MB/s
[ 0.317034] raid6: int32x2 gen() 535 MB/s
[ 0.334032] raid6: int32x2 xor() 292 MB/s
[ 0.351065] raid6: int32x4 gen() 480 MB/s
[ 0.368012] raid6: int32x4 xor() 296 MB/s
[ 0.385032] raid6: int32x8 gen() 421 MB/s
[ 0.402021] raid6: int32x8 xor() 263 MB/s
[ 0.402154] raid6: using algorithm mmxx2 gen() 1578 MB/s
[ 0.402287] raid6: using intx1 recovery algorithm
[ 0.402598] ACPI: Interpreter disabled.
[ 0.402932] vgaarb: loaded
[ 0.403440] SCSI subsystem initialized
[ 0.403768] libata version 3.00 loaded.
[ 0.403868] usbcore: registered new interface driver usbfs
[ 0.404076] usbcore: registered new interface driver hub
[ 0.404218] usbcore: registered new device driver usb
[ 0.404747] PCI: Probing PCI hardware
[ 0.404860] PCI: root bus 00: using default resources
[ 0.404866] PCI: Probing PCI hardware (bus 00)
[ 0.405076] PCI host bridge to bus 0000:00
[ 0.405186] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.405291] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.405397] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.405590] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
[ 0.405615] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.405781] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
[ 0.405893] pci 0000:00:04.0: [8086:7110] type 00 class 0x060100
[ 0.406080] pci 0000:00:04.1: [8086:7111] type 00 class 0x010180
[ 0.406128] pci 0000:00:04.1: reg 0x20: [io 0x1840-0x184f]
[ 0.406152] pci 0000:00:04.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.406291] pci 0000:00:04.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.406429] pci 0000:00:04.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.406567] pci 0000:00:04.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.406794] pci 0000:00:04.2: [8086:7112] type 00 class 0x0c0300
[ 0.406842] pci 0000:00:04.2: reg 0x20: [io 0x1800-0x181f]
[ 0.406966] pci 0000:00:04.3: [8086:7113] type 00 class 0x068000
[ 0.406975] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
[ 0.407071] pci 0000:00:04.3: quirk: [io 0xe400-0xe43f] claimed by PIIX4 ACPI
[ 0.407305] pci 0000:00:04.3: quirk: [io 0x0f00-0x0f0f] claimed by PIIX4 SMB
[ 0.407578] pci 0000:00:06.0: [9005:001f] type 00 class 0x010000
[ 0.407604] pci 0000:00:06.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.407621] pci 0000:00:06.0: reg 0x14: [mem 0xf0a34000-0xf0a34fff 64bit]
[ 0.407652] pci 0000:00:06.0: reg 0x30: [mem 0xf0a00000-0xf0a1ffff pref]
[ 0.408086] pci 0000:00:07.0: [8086:1229] type 00 class 0x020000
[ 0.408111] pci 0000:00:07.0: reg 0x10: [mem 0xf0a35000-0xf0a35fff pref]
[ 0.408124] pci 0000:00:07.0: reg 0x14: [io 0x1820-0x183f]
[ 0.408136] pci 0000:00:07.0: reg 0x18: [mem 0xf0800000-0xf08fffff]
[ 0.408166] pci 0000:00:07.0: reg 0x30: [mem 0xf0900000-0xf09fffff pref]
[ 0.408189] pci 0000:00:07.0: supports D1 D2
[ 0.408195] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.408316] pci 0000:00:09.0: [102b:0519] type 00 class 0x030000
[ 0.408335] pci 0000:00:09.0: reg 0x10: [mem 0xf0a30000-0xf0a33fff]
[ 0.408347] pci 0000:00:09.0: reg 0x14: [mem 0xf0000000-0xf07fffff pref]
[ 0.408385] pci 0000:00:09.0: reg 0x30: [mem 0xf0a20000-0xf0a2ffff pref]
[ 0.408460] vgaarb: setting as boot device: PCI:0000:00:09.0
[ 0.408600] vgaarb: device added: PCI:0000:00:09.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.408856] pci 0000:00:0a.0: [1039:0111] type 00 class 0x040100
[ 0.408880] pci 0000:00:0a.0: reg 0x10: [mem 0x00000000-0x000000ff]
[ 0.409138] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.409287] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 0.409364] pci 0000:00:04.0: PIIX/ICH IRQ router [8086:7110]
[ 0.409530] PCI: pci_cache_line_size set to 32 bytes
[ 0.409574] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.409582] e820: reserve RAM buffer [mem 0x2ffd4000-0x2fffffff]
[ 0.410466] clocksource: Switched to clocksource refined-jiffies
[ 0.457085] pnp: PnP ACPI: disabled
[ 0.462321] pci 0000:00:0a.0: BAR 0: assigned [mem 0x30000000-0x300000ff]
[ 0.462456] pci 0000:00:0a.0: BAR 0: error updating (0x30000000 != 0x000001)
[ 0.462567] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.462686] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.462692] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.462817] NET: Registered protocol family 2
[ 0.463695] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.464017] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.464384] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.466223] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.466446] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.466926] NET: Registered protocol family 1
[ 0.467512] RPC: Registered named UNIX socket transport module.
[ 0.467667] RPC: Registered udp transport module.
[ 0.467799] RPC: Registered tcp transport module.
[ 0.468010] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.468183] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.468362] PCI: setting IRQ 5 as level-triggered
[ 0.468370] pci 0000:00:04.2: assigned PCI INT D -> IRQ 5
[ 0.468519] pci 0000:00:04.2: sharing IRQ 5 with 0000:00:06.0
[ 0.468658] pci 0000:00:04.2: sharing IRQ 5 with 0000:00:09.0
[ 0.468856] pci 0000:00:07.0: Firmware left e100 interrupts enabled; disabling
[ 0.469014] pci 0000:00:09.0: Video device with shadowed ROM
[ 0.469023] PCI: CLS 64 bytes, default 32
[ 0.469703] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.471446] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.471664] audit: initializing netlink subsys (disabled)
[ 0.471853] audit: type=2000 audit(1499888929.470:1): initialized
[ 0.472400] Initialise system trusted keyring
[ 0.478466] VFS: Disk quotas dquot_6.6.0
[ 0.478758] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.480761] NFS: Registering the id_resolver key type
[ 0.480958] Key type id_resolver registered
[ 0.481007] Key type id_legacy registered
[ 0.481150] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.482028] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.482349] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.482741] JFS: nTxBlock = 5925, nTxLock = 47406
[ 0.497192] SGI XFS with ACLs, security attributes, no debug enabled
[ 0.498795] ocfs2: Registered cluster interface o2cb
[ 0.499187] OCFS2 User DLM kernel interface loaded
[ 0.505505] async_tx: api initialized (async)
[ 0.505791] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.506232] io scheduler noop registered
[ 0.506376] io scheduler deadline registered
[ 0.506555] io scheduler cfq registered (default)
[ 0.507189] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.507345] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.507544] intel_idle: does not run on family 6 model 11
[ 0.507617] isapnp: Scanning for PnP cards...
[ 0.864557] isapnp: No Plug & Play device found
[ 0.868519] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.112964] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.358923] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.362702] Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M
[ 1.372919] brd: module loaded
[ 1.373093] HP CISS Driver (v 3.6.26)
[ 1.374415] fnic: Cisco FCoE HBA Driver, ver 1.6.0.17a
[ 1.374813] fnic: Successfully Initialized Trace Buffer
[ 1.376356] fnic: Successfully Initialized FC_CTLR Trace Buffer
[ 1.378334] FDC 0 is a post-1991 82077
[ 1.382951] aic7xxx 0000:00:06.0: found PCI INT A -> IRQ 5
[ 1.383120] aic7xxx 0000:00:06.0: sharing IRQ 5 with 0000:00:04.2
[ 1.383266] aic7xxx 0000:00:06.0: sharing IRQ 5 with 0000:00:09.0
[ 1.593281] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1439c003c10, max_idle_ns: 440795241682 ns
[ 1.593560] clocksource: Switched to clocksource tsc
[ 16.591577] scsi host2: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec aic7890/91 Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 20.441958] Adaptec aacraid driver 1.2-1[41010]-ms
[ 20.442180] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 20.442528] scsi: <fdomain> Detection failed (no card)
[ 20.442675] sym53c416.c: Version 1.0.0-ac
[ 20.442840] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
[ 20.443123] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.26-k.
[ 20.443534] Emulex LightPulse Fibre Channel SCSI driver 11.0.0.0.
[ 20.443672] Copyright(c) 2004-2015 Emulex. All rights reserved.
[ 20.444060] Brocade BFA FC/FCOE SCSI driver - version: 3.2.23.0
[ 20.465910] Failed initialization of WD-7000 SCSI card!
[ 20.537345] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 20.537695] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 20.537871] megasas: 06.808.16.00-rc1
[ 20.538077] mpt3sas version 09.102.00.00 loaded
[ 20.538453] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 20.538688] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 20.538859] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 20.539148] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[ 20.539391] ipr: IBM Power RAID SCSI Device Driver version: 2.6.3 (October 17, 2015)
[ 20.539607] RocketRAID 3xxx/4xxx Controller driver v1.10.0
[ 20.539744] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[ 20.540080] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 20.540924] ata_piix 0000:00:04.1: version 2.13
[ 20.542087] scsi host3: ata_piix
[ 20.542519] scsi host4: ata_piix
[ 20.542797] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1840 irq 14
[ 20.542967] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1848 irq 15
[ 20.545771] Fusion MPT base driver 3.04.20
[ 20.545942] Copyright (c) 1999-2008 LSI Corporation
[ 20.546105] Fusion MPT SPI Host driver 3.04.20
[ 20.546286] Fusion MPT FC Host driver 3.04.20
[ 20.546486] Fusion MPT SAS Host driver 3.04.20
[ 20.546690] Fusion MPT misc device (ioctl) driver 3.04.20
[ 20.546999] mptctl: Registered with Fusion MPT base driver
[ 20.547135] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 20.547273] Fusion MPT LAN driver 3.04.20
[ 20.547611] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 20.550076] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.550227] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 20.550772] mousedev: PS/2 mouse device common for all mice
[ 20.551327] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 20.551516] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 20.551679] md: linear personality registered for level -1
[ 20.551819] md: raid0 personality registered for level 0
[ 20.552000] md: raid1 personality registered for level 1
[ 20.552138] md: raid10 personality registered for level 10
[ 20.552475] md: raid6 personality registered for level 6
[ 20.552615] md: raid5 personality registered for level 5
[ 20.552747] md: raid4 personality registered for level 4
[ 20.552913] md: multipath personality registered for level -4
[ 20.553209] device-mapper: uevent: version 1.0.3
[ 20.553579] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 20.554195] input: Speakup as /devices/virtual/input/input1
[ 20.554578] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[ 20.554771] speakup 3.1.6: initialized
[ 20.554876] synth name on entry is: (null)
[ 20.555383] Initializing XFRM netlink socket
[ 20.555538] NET: Registered protocol family 17
[ 20.555789] 9pnet: Installing 9P2000 support
[ 20.556078] Key type dns_resolver registered
[ 20.556856] microcode: CPU0 sig=0x6b1, pf=0x10, revision=0x1c
[ 20.557182] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 20.557461] Using IPI No-Shortcut mode
[ 20.558038] registered taskstats version 1
[ 20.558193] Loading compiled-in X.509 certificates
[ 20.559770] Btrfs loaded
[ 20.560919] Key type encrypted registered
[ 20.574938] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 20.710440] ata1.00: ATA-7: Maxtor 6E040L0, NAR61590, max UDMA/133
[ 20.710564] ata1.00: 80293248 sectors, multi 0: LBA
[ 20.716160] ata1.00: configured for UDMA/33
[ 20.716787] scsi 3:0:0:0: Direct-Access ATA Maxtor 6E040L0 1590 PQ: 0 ANSI: 5
[ 20.717929] sd 3:0:0:0: [sda] 80293248 512-byte logical blocks: (41.1 GB/38.3 GiB)
[ 20.718300] sd 3:0:0:0: [sda] Write Protect is off
[ 20.718440] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.718494] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.726175] ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL13, max UDMA/33
[ 20.748020] ata2.01: configured for UDMA/33
[ 20.755601] scsi 4:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL13 PQ: 0 ANSI: 5
[ 20.764865] sda: sda1 sda2 < sda5 >
[ 20.766050] sd 3:0:0:0: [sda] Attached SCSI disk
[ 20.784941] sr 4:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 20.785198] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 20.785836] sr 4:0:1:0: Attached scsi CD-ROM sr0
[ 20.786281] md: Waiting for all devices to be available before autodetect
[ 20.786436] md: If you don't use raid, use raid=noautodetect
[ 20.787284] md: Autodetecting RAID arrays.
[ 20.787437] md: Scanned 0 and added 0 devices.
[ 20.787623] md: autorun ...
[ 20.787759] md: ... autorun DONE.
[ 20.810374] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[ 20.858700] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 20.859039] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 20.902885] devtmpfs: mounted
[ 20.908264] Freeing unused kernel memory: 832K (c20b4000 - c2184000)
[ 20.908715] Write protecting the kernel text: 12344k
[ 20.909211] Write protecting the kernel read-only data: 3828k
[ 21.358244] random: nonblocking pool is initialized
[ 22.180945] loop: module loaded
[ 24.196992] udevd[529]: starting eudev-3.1.5
[ 24.914326] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 25.203249] Linux agpgart interface v0.103
[ 25.227833] piix4_smbus 0000:00:04.3: SMBus Host Controller at 0xf00, revision 0
[ 25.422489] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 25.479988] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 25.480185] e100: Copyright(c) 1999-2006 Intel Corporation
[ 25.480445] PCI: setting IRQ 10 as level-triggered
[ 25.480458] e100 0000:00:07.0: assigned PCI INT A -> IRQ 10
[ 25.480618] e100 0000:00:07.0: sharing IRQ 10 with 0000:00:0a.0
[ 25.511282] e100 0000:00:07.0 eth0: addr 0xf0a35000, irq 10, MAC addr 00:e0:18:98:11:15
[ 25.558418] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 25.583062] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 25.857675] ehci-pci: EHCI PCI platform driver
[ 25.861971] uhci_hcd: USB Universal Host Controller Interface driver
[ 25.862320] uhci_hcd 0000:00:04.2: found PCI INT D -> IRQ 5
[ 25.862480] uhci_hcd 0000:00:04.2: sharing IRQ 5 with 0000:00:06.0
[ 25.862628] uhci_hcd 0000:00:04.2: sharing IRQ 5 with 0000:00:09.0
[ 25.862798] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 25.863158] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 25.863445] uhci_hcd 0000:00:04.2: irq 5, io base 0x00001800
[ 25.863758] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 25.863904] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 25.864162] usb usb1: Product: UHCI Host Controller
[ 25.864301] usb usb1: Manufacturer: Linux 4.4.14-smp uhci_hcd
[ 25.864442] usb usb1: SerialNumber: 0000:00:04.2
[ 25.866196] hub 1-0:1.0: USB hub found
[ 25.866362] hub 1-0:1.0: 2 ports detected
[ 27.668735] e100 0000:00:07.0 eth126: renamed from eth0
[ 27.669436] e100 0000:00:07.0 eth1: renamed from eth126
[ 27.929144] Adding 522236k swap on /dev/sda5. Priority:-1 extents:1 across:522236k
[ 28.048065] fuse init (API version 7.23)
[ 28.651160] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 41.888952] NET: Registered protocol family 10
[ 50.900536] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 50.901257] e100 0000:00:07.0 eth1: NIC Link is Up 100 Mbps Full Duplex
[ 50.901647] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready