blob: 23ba1d2a2a1f83e9f24e154cf1ff74304db578c2 [file] [log] [blame]
[ 0.747178] msgmni has been set to 1708
[ 0.748197] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.748226] io scheduler noop registered
[ 0.748237] io scheduler deadline registered
[ 0.748319] io scheduler cfq registered (default)
[ 0.750729] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.750762] ACPI: Power Button [PWRB]
[ 0.751183] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.751209] ACPI: Power Button [PWRF]
[ 0.751717] ACPI: acpi_idle registered with cpuidle
[ 0.757050] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.757074] ACPI: Thermal Zone [TZ00] (71 C)
[ 0.845475] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.866941] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.888147] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.889641] Linux agpgart interface v0.103
[ 0.898797] brd: module loaded
[ 0.899587] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.742782] tsc: Refined TSC clocksource calibration: 1000.000 MHz
[ 1.742815] Switching to clocksource tsc
[ 2.844459] i8042: No controller found
[ 2.844912] mousedev: PS/2 mouse device common for all mice
[ 2.845441] cpuidle: using governor ladder
[ 2.845573] cpuidle: using governor menu
[ 2.845933] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.846259] TCP: cubic registered
[ 2.846273] NET: Registered protocol family 17
[ 2.846344] Key type dns_resolver registered
[ 2.846391] Using IPI No-Shortcut mode
[ 2.848047] Freeing unused kernel memory: 364k freed
[ 2.848494] Write protecting the kernel text: 2884k
[ 2.848554] Write protecting the kernel read-only data: 960k
[ 2.877384] udevd[1002]: starting version 175
[ 2.960260] ACPI: bus type USB registered
[ 2.960368] usbcore: registered new interface driver usbfs
[ 2.960416] usbcore: registered new interface driver hub
[ 2.962265] ACPI: bus type ATA registered
[ 2.976011] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.976380] r8169 0000:01:00.0: irq 40 for MSI/MSI-X
[ 2.980749] usbcore: registered new device driver usb
[ 2.981575] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.982035] libata version 3.00 loaded.
[ 2.982156] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.982642] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.982696] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 2.982734] QUIRK: Enable AMD PLL fix
[ 2.982843] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf7f00000
[ 2.983617] ehci-pci: EHCI PCI platform driver
[ 2.987096] r8169 0000:01:00.0 eth0: RTL8168e/8111e at 0xf81d2000, 00:0d:b9:46:15:70, XID 0c200000 IRQ 40
[ 2.987129] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.994918] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.995298] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
[ 2.995651] r8169 0000:02:00.0 eth1: RTL8168e/8111e at 0xf8296000, 00:0d:b9:46:15:71, XID 0c200000 IRQ 41
[ 2.995712] r8169 0000:02:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.999239] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.999611] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[ 2.999990] r8169 0000:03:00.0 eth2: RTL8168e/8111e at 0xf8298000, 00:0d:b9:46:15:72, XID 0c200000 IRQ 42
[ 3.000014] r8169 0000:03:00.0 eth2: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.037808] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.037838] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.037856] usb usb1: Product: OHCI Host Controller
[ 3.037870] usb usb1: Manufacturer: Linux 3.10.11 ohci_hcd
[ 3.037883] usb usb1: SerialNumber: 0000:00:12.0
[ 3.038211] hub 1-0:1.0: USB hub found
[ 3.038282] hub 1-0:1.0: 5 ports detected
[ 3.039173] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 3.039203] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2
[ 3.039226] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.039306] ehci-pci 0000:00:12.2: debug port 1
[ 3.039407] ehci-pci 0000:00:12.2: irq 17, io mem 0xf7f04000
[ 3.044749] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 3.044830] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.044848] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.044866] usb usb2: Product: EHCI Host Controller
[ 3.044878] usb usb2: Manufacturer: Linux 3.10.11 ehci_hcd
[ 3.044891] usb usb2: SerialNumber: 0000:00:12.2
[ 3.045189] hub 2-0:1.0: USB hub found
[ 3.045210] hub 2-0:1.0: 5 ports detected
[ 3.045511] hub 1-0:1.0: USB hub found
[ 3.045578] hub 1-0:1.0: 5 ports detected
[ 3.046096] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 3.046128] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 3.046154] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.046235] ehci-pci 0000:00:13.2: debug port 1
[ 3.046309] ehci-pci 0000:00:13.2: irq 17, io mem 0xf7f05000
[ 3.051760] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.051845] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.051862] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.051879] usb usb3: Product: EHCI Host Controller
[ 3.051893] usb usb3: Manufacturer: Linux 3.10.11 ehci_hcd
[ 3.051905] usb usb3: SerialNumber: 0000:00:13.2
[ 3.052233] hub 3-0:1.0: USB hub found
[ 3.052255] hub 3-0:1.0: 5 ports detected
[ 3.052968] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 3.052997] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 4
[ 3.053021] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.053102] ehci-pci 0000:00:16.2: debug port 1
[ 3.053178] ehci-pci 0000:00:16.2: irq 17, io mem 0xf7f06000
[ 3.058747] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 3.058827] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.058843] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.058860] usb usb4: Product: EHCI Host Controller
[ 3.058873] usb usb4: Manufacturer: Linux 3.10.11 ehci_hcd
[ 3.058885] usb usb4: SerialNumber: 0000:00:16.2
[ 3.059203] hub 4-0:1.0: USB hub found
[ 3.059224] hub 4-0:1.0: 4 ports detected
[ 3.059644] ahci 0000:00:11.0: version 3.0
[ 3.060306] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 3.060341] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
[ 3.063906] scsi0 : ahci
[ 3.064141] scsi1 : ahci
[ 3.072591] scsi2 : ahci
[ 3.072837] scsi3 : ahci
[ 3.072982] scsi4 : ahci
[ 3.073119] scsi5 : ahci
[ 3.073365] ata1: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03100 irq 19
[ 3.073385] ata2: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03180 irq 19
[ 3.073402] ata3: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03200 irq 19
[ 3.073419] ata4: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03280 irq 19
[ 3.073436] ata5: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03300 irq 19
[ 3.073453] ata6: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03380 irq 19
[ 3.074009] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.074040] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 3.074148] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf7f01000
[ 3.128794] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.128822] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.128840] usb usb5: Product: OHCI Host Controller
[ 3.128853] usb usb5: Manufacturer: Linux 3.10.11 ohci_hcd
[ 3.128865] usb usb5: SerialNumber: 0000:00:13.0
[ 3.129162] hub 5-0:1.0: USB hub found
[ 3.129232] hub 5-0:1.0: 5 ports detected
[ 3.129921] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 3.129950] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 6
[ 3.130052] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf7f02000
[ 3.184805] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.184833] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.184851] usb usb6: Product: OHCI Host Controller
[ 3.184864] usb usb6: Manufacturer: Linux 3.10.11 ohci_hcd
[ 3.184877] usb usb6: SerialNumber: 0000:00:16.0
[ 3.185179] hub 6-0:1.0: USB hub found
[ 3.185249] hub 6-0:1.0: 4 ports detected
[ 3.346755] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 3.378951] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.379028] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.379092] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.379141] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.379191] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.379240] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.467532] usb 2-1: New USB device found, idVendor=090c, idProduct=1000
[ 3.467566] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.467585] usb 2-1: Product: Silicon-Power16G
[ 3.467600] usb 2-1: Manufacturer: UFD 3.0
[ 3.467612] usb 2-1: SerialNumber: P1503809724151200489
[ 3.477245] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 3.477404] scsi6 : usb-storage 2-1:1.0
[ 3.477592] usbcore: registered new interface driver usb-storage
[ 3.571820] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 3.689526] usb 4-1: New USB device found, idVendor=058f, idProduct=6366
[ 3.689561] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.689580] usb 4-1: Product: Flash Card Reader/Writer
[ 3.689596] usb 4-1: Manufacturer: Generic
[ 3.689608] usb 4-1: SerialNumber: 058F63666485
[ 3.690947] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 3.691388] scsi7 : usb-storage 4-1:1.0
[ 4.694474] scsi 7:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 4
[ 4.698776] sd 7:0:0:0: [sda] Attached SCSI removable disk
[ 4.703179] sd 7:0:0:0: Attached scsi generic sg0 type 0
[ 4.782921] scsi 6:0:0:0: Direct-Access UFD 3.0 Silicon-Power16G 1100 PQ: 0 ANSI: 6
[ 4.783334] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 4.785063] sd 6:0:0:0: [sdb] 31490048 512-byte logical blocks: (16.1 GB/15.0 GiB)
[ 4.786092] sd 6:0:0:0: [sdb] Write Protect is off
[ 4.786122] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 4.786984] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.794523] sdb: sdb1 sdb2
[ 4.798376] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 5.849451] udevd[1327]: starting version 175
[ 6.088647] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.094843] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 6.094979] sp5100_tco: PCI Revision ID: 0x42
[ 6.095085] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 6.095109] sp5100_tco: Last reboot was not triggered by watchdog.
[ 6.095212] sp5100_tco: initialized (0xf8312b00). heartbeat=60 sec (nowayout=0)
[ 6.194826] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 6.303113] Error: Driver 'pcspkr' is already registered, aborting...
[ 6.312041] acpi-cpufreq: overriding BIOS provided _PSD data
[ 6.749350] EXT2-fs (sdb1): warning: mounting unchecked fs, running e2fsck is recommended
[ 6.888065] geodewdt: No timers were available
[ 8.723426] NET: Registered protocol family 10
[ 8.924497] r8169 0000:01:00.0 eth0: link down
[ 8.924593] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.924602] r8169 0000:01:00.0 eth0: link down
[ 10.450188] r8169 0000:01:00.0 eth0: link up
[ 10.450226] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.744613] EXT2-fs (sdb1): warning: mounting unchecked fs, running e2fsck is recommended